X2-01. There has been a connectivity error...

Just bought a Nokia X2-01 and I downloaded some games that require network access (to download sponsored content!). Since I don't have a data plan, I was wondering if I can connect to the internet through a USB cable connected to my computer. I have installed the Nokia Suite on my PC but could only figure out how to connect to the internet through my cell phone, not the other way around.
The error message that I receive is: "There has been a connectivity error and the application will exit now. Please check the connectivity settings and try again."
Solved!
Go to Solution.

Hi Fyan,
Welcome to the Nokia forum.
Like you've already found out yourself, you can use your phone's data plan to connect your laptop or PC to the interne. Connecting your phone to your PC's connection is indeed not possible.
Most devices have WLAN which enables you to connect your phone to the same network your PC is connected to, but as the X2-03 does not have a WLAN function, the only way to download apps will be through 3G.
If you don't want to get a data plan you can always buy a Pay-as-you-go SIM card with data credit and use this SIM card to download apps onto the device. It's a little bit of a hassle, but at least it'll enable you to download apps without receiving a high phone bill at the end of the month.
Hope this helps, let me know how you get on.
Iris9290
If my post has helped you in any way, please accept it as a solution or click on the white star, so that other users will be able to benefit from it too.

Similar Messages

  • Since installing firefox 4.0 there has been a rundll error promlem

    After installing 4.0 firefox my computer has a high risk malware which norton removes but not compeletly. I went back to 3.6 firefox but the malware is still there. It is a rundll file & shows up in start menu.
    Thank, Dennis

    It seems unusual that Norton should block and remove firefox updates. Having said that I was posting in a thread about problems with Norton a few days ago see [https://support.mozilla.com/en-US/questions/789617#answer-143767 thread] ''"I down loaded fromFFox the latest down - norton 360 - stopped the down load - stated not to use it - asked to stop running the program - I click yes thinking a problem now on my other computer I cant use FFox as a Browers -"''
    I use Norton (NIS) and received only a mild advisory on one Firefox update. I have Windows XP with Firefox3.6.15 & 4RC installed

  • Bookmark prompts an error popup that says there has been a "script" error. It asks if I would like to continue to try to upload the bookmarks, I say yes, it stalls and I cannot have the bookmarks, making the use of this browser impossible.

    when I try to bookmark pages as I go, it will not store the new bookmarks.....so any usage, imported or stored doesn't work

    Drrhythm2 wrote:
    What's the best solution for this? I
    Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer.

  • There has been a network or file permission error. The network connection..

    hello,
    there has been a network or file permission error. The network connection may be lost.
    this is the error my client gets sometimes when he wants to save a word document.
    when i go in the finder i have no problem accessing that network share, and when i look up the file and check the permissions there is no reason why this error should occure.
    situation :
    1 os 10.3.9 server
    7 os 10.5.5 clients
    1 os 10.3.9 client
    office 2004 for mac (version 11.50)
    there are 2 10.5.5 clients (emacs) with this problem on a regular base (3-5 times a week). One imac 17" 10.5.5 has this once a month.
    it is a wired cat5 network.
    any idea what could cause this problem?
    thanks
    Marco

    I found a logical explanation on the following site : http://www.makemacwork.com/office-2004-wont-save-to-server.htm , I am gonna try the steps they describe and post back the result.
    Marco

  • Best I have been trying for a week to order greeting cards using iPhoto but do I always get the same statement: there has been an error occurred while connecting to Apple's online store try again

    Best I have been trying for a week to order greeting cards using iPhoto but do I always get the same statement:
    there has been an error occurred while connecting to Apple's online store try again

    Best I have been trying for a week to order greeting cards using iPhoto but do I always get the same statement:
    there has been an error occurred while connecting to Apple's online store try again

  • "There has been a network or file permission error. The network connection may have been lost

    Hi,
    While trying to save an Excel or (less frequently) Word document, employees at my company have been seeing the error, "There has been a network or
    file permission error. The network connection may have been lost."  This is more common when they are connected through the VPN, but it also occurs locally.
    The employees all have Win 7 Pro laptops and the file server is Win Server 2008 R2.  I have found suggestions that a Windows update is the cause, but the articles on that all limit it to Server 2003.  Others have suggested setting the program to
    save a local copy of remote files; however, while the setting exists in Word, it does not exist in Excel.
    If anybody has any advice, it would be greatly appreciated.
    Thank you

    This is a known issue, might try the workaround is a better chooses .
    http://support.microsoft.com/kb/291156
    KR

  • Error: var g_objCurrentFormData_Error : There has been an error while processing the form

    Hi,.
    I have a InfoPath 2010 form which was published to SharePoint 2010.  I migrated the content db to SQL Server 2012 and I have converted the Sharepoint 2010 (windows based) to the SharePoint 2013 claims based site. I have not fully upgraded the site to
    2013 version (Version upgrade to SP 2013) is not done..
    In the InfoPath 2010 form, which is available in SP 2013. I have a button and on click of it, i have the below code:
    XPathNavigator domNav = MainDataSource.CreateNavigator();
    XPathNavigator fldUserurl = domNav.SelectSingleNode("/my:myFields/my:TaskUrl", this.NamespaceManager);
    if (!string.IsNullOrEmpty(fldUserurl.Value))
    string urlToDecode = HttpUtility.UrlDecode(fldUserurl .Value);
    HttpContext.Current.Response.Write("<script type='text/javascript'>window.open('" + urlToDecode + "','_self','left=20,top=20,width=500,height=500,toolbar=1,resizable=0');</script>");
    HttpContext.Current.Response.Flush();
    HttpContext.Current.Response.End();
    The above code works fine in SharePoint 2010, however after moving the Site to SP 2013 Claims mode, I am getting the error as
    "var g_objCurrentFormData_Error = [[[12,"There has been an error while processing the form.","","","guid"]],[],0,"","",1033,"","",["0","","","","","",0,0,"",0,false],"","0",false,"",0,"","http:\u002f\u002ftest-t1.com\u002fs\u002fTestApplication","ltr","http:\u002f\u002ftest-t1.com\u002fs\u002fTestApplication",6.35202885373882E+17"
    In the SP Logs, i found the below:
    Unhandled exception processing request for PostbackPage Microsoft.Office.InfoPath.Server.Util.InfoPathFatalException: Exception of type 'Microsoft.Office.InfoPath.Server.Util.InfoPathFatalException' was thrown.   
     at Microsoft.Office.InfoPath.Server.Util.GlobalStorage.get_CurrentFormId()   
     at Microsoft.Office.InfoPath.Server.Util.GlobalStorage.get_CurrentContext()   
    How to fix this?
    Thanks

    Hi Venkatzeus,
    please let us know your sharepoint 2013 latest cumulative update, if possible please make sure it is March 2013 update or above.
    as i know, between 2010 infopath and 2013 there are difference, perhaps if you can debug your form it may help.
    most probably there are environment settings difference between 2010 sharepoint and 2013 sharepoint. such as the data connection size/length, that causing it failed, or the form data is NULL.
    http://infopathdebugger.codeplex.com/
    http://www.infopathdev.com/forums/t/26330.aspx
    http://social.technet.microsoft.com/Forums/en-US/5c9d2fce-0fd8-439c-a636-bf856eb76e15/how-to-retrieve-term-store-management-values?forum=sharepointgeneralprevious
    Regards,
    Aries
    Microsoft Online Community Support
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • There has been an error processing your call.

    I try to call but is keeping saying this
    '''Welcome to Verizon Wireless there has been an error in processing your call, please power down and turn off your phone. Then turn your phone back on and try your call again.
    why??

    Hi Venkatzeus,
    please let us know your sharepoint 2013 latest cumulative update, if possible please make sure it is March 2013 update or above.
    as i know, between 2010 infopath and 2013 there are difference, perhaps if you can debug your form it may help.
    most probably there are environment settings difference between 2010 sharepoint and 2013 sharepoint. such as the data connection size/length, that causing it failed, or the form data is NULL.
    http://infopathdebugger.codeplex.com/
    http://www.infopathdev.com/forums/t/26330.aspx
    http://social.technet.microsoft.com/Forums/en-US/5c9d2fce-0fd8-439c-a636-bf856eb76e15/how-to-retrieve-term-store-management-values?forum=sharepointgeneralprevious
    Regards,
    Aries
    Microsoft Online Community Support
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • I cannot sign into App Store. "unknown error" and then "We cannot complete your request. There has been an error in the App Store. Please try again later. (4)"

    I cannot sign in to the App Store.
    I changed countries a few months ago and updated all my account info and everything was working fine, until recently, while trying to upgrade my softwear to Mavericks, which I cannot do. My apple Username and password work fine on iTunes and on my iPhone. I can also access all my account info when I sign in through the website. It just will not work for the App Store on my Mac Pro.
    When I click "Welcome" under Quick Links it asks me to sign in. I sign in with my Apple Username and Password and then it DOES NOTHING
    When I click on "Free Upgrade" and then "Install" on the mavericks software, it asks me to sign in again. This time it says "unknown error" and then it says "We cannot complete your request. There has been an error in the App Store. Please try again later. (4)"
    I''m completely blocked. I cannot procede without being able to update my software.
    Please help me.
    Rhea

    You could try this.
    Back up all data.Triple-click anywhere in the line below on this page to select it:
    /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
    Right-click or control-click the line and select
    Services ▹ Reveal
    from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Reboot and test. If there's no change, restore the item you deleted from a backup, overwriting the one that may have been created in its place. Otherwise, you may need to recreate some of your settings in the Network preference pane.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
    Credit for this solution to ASC member luis.pinhor.

  • Lightroom 5 says "There has been an error during the modification of the modules." Lightroom does not open, freezes.

    Hi, I've got Creative Cloud, on a Mac Pro late 2010, 6 Core, 3.3 Gz, which has just been emptied and re-set with Yosemite. I've downloaded the Adobe stuff I need, especially Ps, Il, Id, Pp, Ae and Lightroom 5. Everything works find except Lightroom which doesn't open, giving me this message each time: "There has been an error during the modification of the modules."  There is no error number attached and the program freezes. I've got a deadline which has been broken because I can't finish the work I've started in Lightroom 5 on my old computer which I deactivated in order to run the new one. Now I don't know what to do nor where to look for the problem. I've placed the Lightroom Library on an external LaCie 4Big 8Tb Raid 5.

    Error changing modules | Lightroom

  • InfoPath form, rich text fields, "There was a form postback error" InvalidOperationException, There has been an error while processing the form

    Using InfoPath 2013 browser enabled form.
    I am getting the above error on ALL Infopath Designed Rich Text fields, where the "Cannot be blank" attribute is set.
    To reproduce it, I create a custom list and custom list form with InfoPath 2013. I add 2 Rich Text fields and enable "cannot be blank". To raise the error, I put some data in the RT field. Skip to another field (so focus is changed and a postback
    occurs), then back to original field to delete the contents (to raise the validation).
    I originally thought it was associated with the HTMLCHKR.DLL not being registered (and I have re-registered it just in case), but the exception I get from the ULS logs reads (it is from a list AFTER I have re-registered the DLL):
    There was a form postback error. (User: 0#.w|myDomain\jc, Form Name: Template, IP: , Request: h t t p ://MyWebApp/MySite/Lists/rtAfterHtmlCHkrReg/Item/newifs.aspx?List=2212ff41-77b4-445b-931b-d7e538c9da91&Source=h t t p://MyWebApp/MySite/Lists/rtAfterHtmlCHkrReg/AllItems.aspx&RootFolder=&Web=3db49106-bdca-47bb-b4cd-a549d2d86aa7,
    Form ID: urn:schemas-microsoft-com:office:infopath:list:-AutoGen-2015-01-16T21:51:48:853Z, Type: InvalidOperationException, Exception Message: No content generated as the result of the operation.) 8cc5e09c-3665-903b-575a-faaac506c40a
    I noticed that errors associated with the HTMLCHKR.DLL not being registered would have some sort of COM exception (example: TYPE_E_LIBNOTREGISTERED or REGDB_E_CLASSNOTREG)
    I also should mention that this problem started happening about 3 weeks ago. We have extended the web application to handle HTTPS on the intranet zone (we had a reverse proxy project that did not eventuate) - would that cause something? How can I do further
    checking?

    Hi,
    I have done a test in my SharePoint, and I met the same issue with you.
    I created a custom list and custom list form with InfoPath 2013. I added 2 Rich Text fields and enabled "cannot be blank".  I put some content in the RT field, then delete the contents, I got the error message:"there has been an
    error while processing the form."
    Here is a similar post said that executing the command: regsvr32 "C:\Program Files\Common Files\Microsoft Shared\
    OFFICE14\htmlchkr.dll" will solve the issue.
    https://social.msdn.microsoft.com/Forums/en-US/eb2e0f6e-c8e4-4e92-ac5e-a09d72759eda/rich-text-field-error-in-webform?forum=sharepointcustomizationprevious
    But I just disabled "cannot be blank", and it solved the issue.
    Best Regards,
    Lisa Chen
    Lisa Chen
    TechNet Community Support

  • There has been an error creating the personal site. User cannot be found

    Few of my Domain Users are able to create MySite and few of them are not, though they are having same permission.
    There has been an error creating the personal site. Contact your site administrator for more information.
    Event Viewer is showing :
    My Site creation failure for user 'DOMAIN\username' for site url 'http://10.31.2.9:46744/personal/username'. The exception was: Microsoft.Office.Server.UserProfiles.PersonalSiteCreateException: A failure was encountered while attempting to create
    the site. ---> Microsoft.SharePoint.SPException: User cannot be found.
    Below are the DLL versions of my installation. 
    Microsoft.SharePoint.Portal.dll : 12.0.6420.1000
    Microsoft.SharePoint.Portal.dll : 12.0.6422.1000
    Please suggest.
    Thanks in Advance

    Please note for future reference that you should only ever post any one question ONCE.
    Posting it twice means that there are parallel threads and  peoples time is wasted.
    Here one copy was posted as a new thread and the other copy was posted as a reply in another thread *which had already been closed by the Original Poster years earlier*.
    You should not in any case add new questions to existing threads and especially not to old, closed, threads.
    I have therefore deleted that other copy of this post. This is now the only place that people will see your question and the answers to it (which is how it should be).
    Moderator pre-2010 forums
    SP 2010 "FAQ" (mainly useful links):
    http://wssv4faq.mindsharp.com/default.aspx
    WSS3/MOSS FAQ (FAQ and Links) http://wssv3faq.mindsharp.com/default.aspx
    Both also have links to extensive book lists and to (free) on-line chapters

  • I am having issues with my iphone6 bluetooth connection in my car.  When going to settings under bluetooth, it is unable to find any devices.  I did not have this issue until I downloaded IOS 8.0.2.  Do you know if there has been any resolution yet?

    I am having issues with my iphone6 Bluetooth connection in my 2013 Mercedes C Class.  When going to settings under Bluetooth, it is unable to find any devices.  I did not have this issue until I downloaded IOS 8.0.2.  Do you know if there has been any resolution from Apple yet?

    Hi susan from WSL, 
    Welcome to the Apple Support Communities!
    I understand that when your Bluetooth accessories, such as your car connection, do not work as expected it can be very frustrating. In this situation, I would recommend working through the troubleshooting steps provided in the attached article. 
    If you can’t use a Bluetooth accessory or car kit
    Cheers, 
    Joe

  • When user click "My Site clicking My Content states: There has been an error creating the personal site. etc

    Hello community
        Using Sharepoint 2010 Server and the UI on its intranet there is a My Site.  After creating the My Site the user account that created the intranet easily can create it's My Site, My Content and My profile.  But when I logon as
    a user
    when I try to create the My site I get an error stating"  "There has been an error creating the personal site.  Contact your site administrator for more information". In the Event viewer log pasted below it says: A failure was encountered
    and User cannot be found.  So I check the UPS Synchronization and I can find the username  in UPS "Manage User Profile" and I can logon with the username I just can't create the My Content after clicking My Site.  The funny
    thing is if I click My Profile the My Profile page appears (although it is a one-way trust relationship if I use "Check Names" when I try to "Add User" to a group an error message appears stating "No match found. etc). So the
    question is how come the account that created the intranet can create 
    My Site and create My Profile and My Content but if a regular user account logs on and clicks My Site, My Profile and get a page but clicking My Content produces that error that says:  "There has been an error creating the personal site.  Contact
    your site administrator for more information". (Note: The output from Event Viewer is posted below)?
        Thank you  
        Shabeaut
    Log Name:      Application
    Source:        Microsoft-SharePoint Products-SharePoint Portal Server
    Date:          7/24/2014 4:51:42 PM
    Event ID:      5187
    Task Category: Administration
    Level:         Error
    Keywords:     
    User:          NT AUTHORITY\IUSR
    Computer:      <ServerName>.<FullQualifiedDomainName>
    Description:
    My Site creation failure for user '<DomainName>\<UserName>' for site url 'http://<MySiteHostUrl>/personal/<DomainName>\<UserName>'. The exception was: Microsoft.Office.Server.UserProfiles.PersonalSiteCreateException: A failure
    was encountered while attempting to create the site. ---> Microsoft.SharePoint.SPException: User cannot be found.
       at Microsoft.SharePoint.Administration.SPSiteCollection.Add(SPContentDatabase database, SPSiteSubscription siteSubscription, String siteUrl, String title, String description, UInt32 nLCID, String webTemplate, String ownerLogin, String ownerName,
    String ownerEmail, String secondaryContactLogin, String secondaryContactName, String secondaryContactEmail, String quotaTemplate, String sscRootWebUrl, Boolean useHostHeaderAsSiteName)
       at Microsoft.SharePoint.SPSite.SelfServiceCreateSite(String siteUrl, String title, String description, UInt32 nLCID, String webTemplate, String ownerLogin, String ownerName, String ownerEmail, String contactLogin, String contactName, String contactEmail,
    String quotaTemplate, SPSiteSubscription siteSubscription)
       at Microsoft.Office.Server.UserProfiles.UserProfile.<>c__DisplayClass2.<CreateSite>b__0()
       --- End of inner exception stack trace ---
       at Microsoft.Office.Server.UserProfiles.UserProfile.<>c__DisplayClass2.<CreateSite>b__0()
       at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<RunWithElevatedPrivileges>b__2()
       at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)
       at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param)
       at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated secureCode)
       at Microsoft.Office.Server.UserProfiles.UserProfile.CreateSite(String strRequestUrl, Boolean bCollision, Int32 lcid).
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-SharePoint Products-SharePoint Portal Server" Guid="{8b3ddd3d-2b09-4669-bf81-e2d6921feeea}" />
        <EventID>5187</EventID>
        <Version>14</Version>
        <Level>2</Level>
        <Task>1</Task>
        <Opcode>0</Opcode>
        <Keywords>0x4000000000000000</Keywords>
        <TimeCreated SystemTime="2014-07-24T20:51:42.494Z" />
        <EventRecordID>33776</EventRecordID>
        <Correlation ActivityID="{BC4FAAA6-FA5B-4309-8C2E-0639F5BAC567}" />
        <Execution ProcessID="9600" ThreadID="9520" />
        <Channel>Application</Channel>
        <Computer><ServerName>.<FullQualifiedDomainName></Computer>
        <Security UserID="S-1-5-17" />
      </System>
      <EventData>
        <Data Name="string0"><DomainName>\<UserName></Data>
        <Data Name="string1">'http://<MySiteHostUrl>/personal/<DomainName>\<UserName>'</Data>
        <Data Name="string2">Microsoft.Office.Server.UserProfiles.PersonalSiteCreateException: A failure was encountered while attempting to create the site. ---&gt; Microsoft.SharePoint.SPException: User cannot be found.
       at Microsoft.SharePoint.Administration.SPSiteCollection.Add(SPContentDatabase database, SPSiteSubscription siteSubscription, String siteUrl, String title, String description, UInt32 nLCID, String webTemplate, String ownerLogin, String ownerName,
    String ownerEmail, String secondaryContactLogin, String secondaryContactName, String secondaryContactEmail, String quotaTemplate, String sscRootWebUrl, Boolean useHostHeaderAsSiteName)
       at Microsoft.SharePoint.SPSite.SelfServiceCreateSite(String siteUrl, String title, String description, UInt32 nLCID, String webTemplate, String ownerLogin, String ownerName, String ownerEmail, String contactLogin, String contactName, String contactEmail,
    String quotaTemplate, SPSiteSubscription siteSubscription)
       at Microsoft.Office.Server.UserProfiles.UserProfile.&lt;&gt;c__DisplayClass2.&lt;CreateSite&gt;b__0()
       --- End of inner exception stack trace ---
       at Microsoft.Office.Server.UserProfiles.UserProfile.&lt;&gt;c__DisplayClass2.&lt;CreateSite&gt;b__0()
       at Microsoft.SharePoint.SPSecurity.&lt;&gt;c__DisplayClass4.&lt;RunWithElevatedPrivileges&gt;b__2()
       at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)
       at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param)
       at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated secureCode)
       at Microsoft.Office.Server.UserProfiles.UserProfile.CreateSite(String strRequestUrl, Boolean bCollision, Int32 lcid)</Data>
      </EventData>
    </Event>

    Make sure you enable self service site creation on the MySite web application via CA
    http://technet.microsoft.com/en-us/library/cc261685(v=office.14).aspx
    You mentioned trusts and people picker.  I am having a bit of trouble understanding the exact issue here, but is the issue also coming up that the user in question cannot be found with people picker?
    searchadforest setting to make sure SP can reach to trusted domains to find users. 
    "When a Web application uses Windows authentication, People Picker searches all two-way trusted forests and all two-way trusted domains. However, if you want to search from a one-way trusted forest or a one-way trusted domain, you must run the
    setapppassword operation, and then run the peoplepicker-searchadforests
    property."
    http://technet.microsoft.com/en-us/library/cc262051(v=office.12).aspx
    http://technet.microsoft.com/en-us/library/cc263460(v=office.12).aspx
    Christopher Webb | MCM: SharePoint 2010 | MCSM: SharePoint Charter | MCT | http://christophermichaelwebb.com

  • I use an iMac 10.6.8 with iPhoto '09 to download digital images from Canon DSLRs. Until the last two weeks there has been no trouble whatever importing images by  a USB connection from either camera to the Mac. Now the process will not kick in. Any ideas?

    I use an Mac OSX 10.6.8 with iPhoto 09 to download digital images from two Canon DSLRs. Until the last week, there has been no problem whatever in launching the import procedure once the USB connection has been connected and the camera switched on. Now the process will not kick in at all for either camera.  I can't find a solution through iPhoto help or from other sources.
    Any ideas to fix?  (I admit I have not tested the USB cable at this time).

    What does "kick in" mean?
    As a Test:
    Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?
    Post back with the result.

Maybe you are looking for