X3-02 in pak or not?

i want to knw asap tha is nokia x3-02 available in pak ???
if yes then at wat price ???

You will need to ask retailers in that country for an answer. They are the people that will know when and how much.

Similar Messages

Aggregation Level in not prepared to run on HANA

Hello Experts,
I've the following system configuration:
CPMBPC 810: SP 0001
POASBC 100_731: SP 0005
HANABPC 810: SP 0001
Hence we've PAK and BPC license too for working with PAK.
Now, I've created an Aggregation level: ZTPM_AG01 on top of a Multiprovider which encompasses 2 real time and 1 standard cube. By default all three are HANA Optimized.
Then why I'm getting a red traffic light for both the aggregation level 'ZTPM_AG01' as well as the MultiProvider as shown below:
I've gone through below link:
How to Check whether a Planning Function or a Disaggregation in PAK is executed in Memory
and noted that we were in alignment for the most of the below points except the one in bold:
Is note 1637148 implemented?
Is the system switched to PAK (see note 1637199)?
Is the InfoCube HANA optimized?
Is the InfoCube/DataStore Object entered in the list of HANA optimized InfoCubes?
Is a characteristic relationship type exit or type hierarchy used in the InfoProvider?
Is a data slice type Exit used in the InfoProvider?
Is any virtual object used (virtual InfoCube, master data with own read class etc.)?
Is a key figure type TIMS or DATS used (input enabled)?
Is the user parameter RSPLS_HDB_SUPPORT set to ‘HDB_ON’ (if necessary, see note 1637199)?
Global emergency exit switch is not set using report SAP_RSADMIN_MAINTAIN with parameter object RSPLS_HDB_PROCESSING_OFF with blank or empty value.
I've made user parameters RSPLS_HDB_SUPPORT to HDB_ON.
Can you please let me know, what am I missing here ?
Thanks & regards,
Jomy

Dear DonB evis!
I had exactly the same problem with lightroom as you:
"C:\Program Files\Adobe Photoshop Lightroom\lightroom.exe
This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem."
Event log indicates, that "Component identity found in manifest [inside Lightroom - Microsoft.VC80.MFC.MANIFEST] does not match the identity of the component requested".
The theory is that files called manifests tell the system loader that application X (here: lightroom.exe) depend on assembly Y (Microsoft.VC80.MFC). This very CRT assembly is a shared one, and it resides in C:\Windows\WinSxS\.
SO this is a problem of your Windows not Lightroom, which refers to windows shared element which cannot be found (due to .NET installation and policies mess).
Side by side assemblies use publisher configuration files (POLICIES) to globally redirect applications and assemblies from using one version of a side-by-side assembly to another version of the same assembly.
There is a problem on certain machines caused by Windows SP1 to .NET 2.0 which causes problems messing with policies and redirecting applications from using proper shared assemblies.
After installing SP1 (which installs with Windows Update) to .NET 2.0 on those machines it was impossible to reinstall .NET unless you delete the policies inside the C:\Windows\WinSxS\Policies\ folder (I do not know exactly why, but it was my case and several other people too).
In my previous post I described you the process I did two days ago on my system (WinXP Pro with SP2) and after that lightroom start to run.
I am sorry you are experiencing such difficulties, but I would not post my way of solving the problem if I did not test it successfully on my system.
Hope you manage to solve it.
Best regards.

Problems with RWD Info Pak 5.5 and SAP 7.2

Hi, since the new SAP GUI was installed, I've been having problems with RWD Info Pak 5.5. I start to record Event step in SAP and when I stop and go back to the word document, Info Pak will not record any of the steps but might record pieces of snapshots.
Is anyone else having this problem or know if there is a fix?
Thanks!

Similar problem here, after updating xorg and nvidia driver the system freezes with nvidia logo on display and caps lock and scroll lock leds blinking.
I got nvidia geforce 7300.
Any solution to this besides downgrading?

WCS to Prime 1.2 licensing

Hi
I am doing a migration from WCS 7.x to Prime 1.2
There is a WCS 7 to Prime 1.2 migration license pack that we have obtained.
However, as I understand it, we need to install NCS 1.1.1.24 first, import the WCS database and then carry on to do the NCS to Prime upgrade. So we have the licenses for the final Prime 1.2 deployment.
When we get to NCS 1.1.1.24 we cannot migrate off of the main login page until we apply an appropriate NCS license. We were told by Cisco Sales that a temporary license can be generated for NCS 1.1.1.24 by sending licensing the license XML file taken from WCS along with the VUDI and our license order info. We have followed this path successfully once. We sent the XML file to Cisco along with some other info and they returned a license we could use on NCS. We then moved to Prime 1.2. However on this occasion Cisco insist we need an NCS license.
I have moved from NCS 1.x to Prime 1.2 before and all the licenses have been retained.
So are Cisco telling me that to migrate from WCS 7 to Prime 1.2 I should license the NCS server and simply upgrade it to Prime 1.2 with no further licensing needing purchased ? If so why is there a WCS to Prime 1.2 license pack ?
Or are Cisco saying we need the NCS license AND the Prime 1.2 licenses ?
Thanks for any input, St.

Thanks for this too Scott.
I see that you could license NCS 1.1.1.24 then move to Prime 1.2 without applying further licenses. I have done this in a NCS to Prime upgrade. Prime maintains the NCS licenses. However there is a WCS to Prime 1.2 License SKU which we have ordered because we are starting from WCS on this occasion. The licenses generated from these PAKs do not work on NCS 1.1.1.24
So it would seem that the WCS to Prime migration SKU does not include the necessary license to allow us to pass through NCS 1.1.1.24 during the migration.
I think if we had ordered a WCS to NCS migration SKU we would have got the necessary NCS license. We could then install that and carry on to Prime 1.2 with no further license requirements. If that is the case why is there a WCS to Prime 1.2 migration SKU ?
We did resolve this issue before by following the advice of Cisco Sales. We logged a call with licensing, supplied the exported WCS license XML file and the NCS VUDI and they gave us an NCS license. However, on this occasion licensing are not so forthcoming. They suggest we need a NCS 1.x licence.
So either they are implying we need a NCS 1.x AND a Prime 1.2 license. Or we should have bought a WCS to NCS migration license and the NCS to Prime migration license is useless because it does not allow us to pass through NCS as part of the migration process.
Thanks for any help on this, St.

Is there a recent security update for OSX version 10.6.8?

Is there a recent security update for OSX version 10.6.8?

I am getting more confused. I have Lion 10.7.5 and thought this would not be susceptible to SSL problem.
I also took Lanny's advice and went to "gotofail.com" and it said I was SAFE.
Can I assume I am OK?
Also,i have an ipod 4g and went to the same gotofail, and it also said I am safe. I have not udated the security patch as do not have sufficient space (need 2.7gig) but someone suggested a go around which I have not tried yet.
I am accessing the net via a Veiizon jet pak, and not using open networks.
Please comment

HA SSO Between LDPE and non-LDPE

There is a customer who got two new 5500 WLCs for Russia, running 7.4.110 SV. per mistake one of the controllers was sent as non-LDPE capable, the other is LDPE. He wants to know if possible to enable HA SSO between these two controllers?
The only topic related I have found is this https://supportforums.cisco.com/thread/2220165
But not too much info!

Here is the risk your customer faces and you know they will say they didn't know!
I would just tell your customer it's not stabile and they need to RMA the unit!
Important Note for Customers in Russia
If you plan to install a Cisco Wireless LAN Controller in Russia, you must get a Paper PAK, and not download the license from Cisco.com. The DTLS Paper PAK license is for customers who purchase a controller with DTLS that is disabled due to import restrictions but have authorization from local regulators to add DTLS support after the initial purchase. Consult your local government regulations to ensure that DTLS encryption is permitted.
Sent from Cisco Technical Support iPhone App

Customer dependent unit of measure

Folks,
We have items which have alternative UOM: PCE and PAK. We have set the sales UOM in material master on PAK's, which results in default PAK in the sales order. However, some customers always order in PCE and in that case, the default PAK should not be proposed but a PCE.
Any suggestions?
MZ

Hi
You can use Function Module - /DSD/SL_FSR_UNIT_CONVERSION or /sapxcqm/get_uom to convert from or to Alternate or Base unit of Measure.
Best Regards

Apps lost their libraries after upgrade

After many upgrades at least one application losts its library. Example got after yesterday upgrade:
$ inkscape
inkscape: error while loading shared libraries: libMagick++.so.3: cannot open shared object file: No such file or directory
$ locate libMagick++
/usr/lib/libMagick++.so
/usr/lib/libMagick++.so.4
/usr/lib/libMagick++.so.4.0.0
To solve this:
$ cd /usr/lib/
# ln -s libMagick++.so libMagick++.so.3
Same for "libMagickWand.so.3" needed by "obex-data-server".
What can we do to prevent such situations?

Queries:
pacman -Qo /usr/lib/libMagick++.so.3
pacman -Qo /usr/lib/libMagickWand.so.3
returned that no package owns these libraries. The imagemagick version is:
pacman -Ss imagemagick
extra/imagemagick 6.6.2.10-1 [installed]
An image viewing/manipulation program
extra/imagemagick-doc 6.6.2.0-1
The ImageMagick documentation (utilities manuals and libraries API)
Configuration options in /etc/pacman.conf does not allows testing neither testing-community repositories:
#[testing]
## Add your preferred servers here, they will be used first
#Include = /etc/pacman.d/mirrorlist
[core]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[extra]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
#[community-testing]
## Add your preferred servers here, they will be used first
#Include = /etc/pacman.d/mirrorlist
[community]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
Some packages have been installed from aur using pak, but not imagemagick:
pak imagemagick
1 extra/imagemagick-doc 6.6.2.0-1
The ImageMagick documentation (utilities manuals and libraries API)
2 extra/imagemagick 6.6.2.10-1 [installed]
An image viewing/manipulation program
3 aur/imagemagick-fftw 6.6.2.9-3
An image viewing/manipulation program, with Fourier transform processing
4 aur/imagemagick-nox 6.6.2.7-1 (out of date)
An image viewing/manipulation program, without X dependencies
5 aur/php-magickwand 1.0.8-1
ImageMagick MagickWand API support for PHP
6 aur/pythonmagick 0.9.1-1
ImageMagick for Python
7 aur/ruby-rmagick 2.13.1-1
RMagick is an interface between the Ruby programming language and the ImageMagick and GraphicsMagick image processing libraries
8 aur/ruby-rmagick2 2.13.1-1
Interface between the Ruby programming language and the ImageMagick
I'm using pacman and pak to install packages so I was sure I do not install from testing repos with "pacman.conf" settings as above.

MacBook Black: Selling - Leopard license question

Greetings,
I'm interested in selling my MacBook Black. The only lingering question I'd like some advise on is what exactly to do with the Leopard license that will come with my new MacBook... I'll explain.
My current MacBook Black came with 10.4.x, and when Leopard came out I purchased a family pack (5 seats) to install on my Mac Pro (quad core) and MacBook Black. Now that I'm looking to sell the MacBook Black I'd like to ship it with Leopard installed... here's what I thought about doing.
While holding on to the MacBook Black, purchase a new MacBook. Wipe the new MacBook and do a clean install from my family pack. Transfer files from the MacBook Black to the new MacBook, verify everything is happy, make a backup of my new MacBook. Wipe my old MacBook Black and do a clean install of the Leopard license that came with my new MacBook, and ship this original disk along with all related contents to the purchaser.
My only concern is that if the family pack of Leopard keeps track of installs... would this read 3/5 installations when at this point it should only be 2/5? Also I'm not 100% certain if it matters using an older Leopard install disk on the new machine and the newer Leopard install disk on the old machine.
I'm all about doing this in a professional manner, and initially it doesn't seem like I'd need to purchase yet another Leopard license for the purchaser because one already comes with my new MacBook.
Any advise would be much appreciated

That's correct. You cannot install your copy of Leopard from the new computer onto the one your will sell. That violates the license agreement. Your Family Pak does not extend to the original discs that come with the new computer. If you were to install Leopard in that way then you would be legally obliged to provide the original discs from your new computer to the person who buys the old one. You do not want to do that for two reasons: 1) the discs contain your pre-bundled software, Windows Boot Camp drivers installer, and the Apple Hardware Test suite; 2) they are OEM discs and will only work on your new computer.
True, the computer will not have Leopard installed on it. If the new owner wants Leopard, then they can purchase their own legal copy or you can purchase a single-license copy of Leopard to provide with the computer when you sell it.
Legally these are your alternatives.

Why can I not post on "excessive data usage jet pak"

Nine posts, but it won't accept replies. I am logged on.
https://community.verizonwireless.com/message/937422#937422
Wade

Maybe you can help me on this one: "huge data hog" started by Aframer. It has 39 replies, but they are not numbered as is usual. Why?
It, too, is locked. Why?
The notice says it branched to a different discussion, but when I click to see the new discussion branched to, I get this:
Access to this place or content is restricted. If you think this is a mistake, please contact your administrator or the person who directed you here.
How do I contact my administrator?
How can I access the person who directed you here.
The "person" was a Verizon computer. Wade

How can I find the Firefox version on my PC with windows XP? It is not a device.

I have a PC with Windows XP service Pak 3. How do I find which version of Firefox I have? Please do not assume I have a device and send me to Settings/ device
Thank you

[[Find what version of Firefox you are using]] can help

Missing compatibility libraries, or not updated on AUR ?

Hi,
where to start ? K lets go, ... i ve downloaded the 1.5 full patch of the game EnemyTerritory:QuakeWars and installed it.
Now i get this error message:
WARNING: SDL_SetVideoMode failed: Couldn't find matching GLX visual
Mi internet research brings me to the point to think about 32bit compatibility.
glxinfo | grep direct ->Yes
[z13l5ch31b3@fUn ~]$ cat /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder63) Wed Oct 1 15:09:35 PDT 2008
# Auto-generated by Archie mkxcfg
# Auto-generated by Archie mkxcfg
Section "ServerLayout"
# Serial Mouse not detected
# USB Mouse not detected
Identifier "Xorg Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "PS/2 Mouse" "CorePointer"
EndSection
Section "Files"
# Additional fonts: Locale, Gimp, TTF...
# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
# Load "synaptics"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
Option "XkbVariant" "nodeadkeys"
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "Monitor"
# Warning: This may fry old Monitors
# Very conservative. May flicker.
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
# Default modes distilled from
# "VESA and Industry Standards and Guide for Computer Display Monitor
# Timing", version 1.0, revision 0.8, adopted September 17, 1998.
# $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
Identifier "Monitor0"
HorizSync 28.0 - 96.0
VertRefresh 50.0 - 75.0
ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync interlace
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -hsync +vsync
ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -hsync +vsync
ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -hsync +vsync
ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -hsync +vsync
ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -hsync +vsync
ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -hsync +vsync
ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -hsync +vsync
ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -hsync +vsync
ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync
ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -hsync +vsync
ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -hsync +vsync
ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -hsync +vsync
ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -hsync +vsync
ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -hsync +vsync
ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -hsync +vsync
ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -hsync +vsync
ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -hsync +vsync
ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -hsync +vsync
Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "All"
BoardName "All"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
and lsmod
[z13l5ch31b3@fUn ~]$ lsmod
Module Size Used by
nvidia 6893904 26
udf 82980 1
crc_itu_t 3840 1 udf
isofs 33700 0
zlib_inflate 20096 1 isofs
ipv6 259812 10
oss_usb 111116 1
oss_hdaudio 135396 3
osscore 535060 2 oss_usb,oss_hdaudio
parport_pc 36676 1
ppdev 9092 0
irtty_sir 7040 0
joydev 11584 0
sir_dev 13188 1 irtty_sir
lp 10980 0
parport 33004 3 parport_pc,ppdev,lp
irda 112568 1 sir_dev
psmouse 38288 0
crc_ccitt 3840 1 irda
ppp_generic 24988 0
serio_raw 7044 0
pcspkr 4352 0
k8temp 6144 0
i2c_viapro 9492 0
agpgart 29652 1 nvidia
shpchp 31512 0
i2c_core 21140 2 nvidia,i2c_viapro
pci_hotplug 27812 1 shpchp
sg 28596 0
thermal 16796 0
processor 33836 1 thermal
fan 6020 0
evdev 10880 5
usbhid 46016 0
hid 40960 1 usbhid
button 7824 0
ff_memless 6664 1 usbhid
battery 12036 0
ac 6020 0
slhc 7680 1 ppp_generic
r8169 27396 0
rtc_cmos 11424 0
rtc_core 17436 1 rtc_cmos
rtc_lib 4480 1 rtc_core
ext3 125704 1
jbd 45716 1 ext3
mbcache 8708 1 ext3
sr_mod 16836 1
cdrom 36128 1 sr_mod
sd_mod 25240 3
ehci_hcd 35596 0
uhci_hcd 23952 0
usbcore 132080 5 oss_usb,usbhid,ehci_hcd,uhci_hcd
sata_via 9220 0
ahci 27144 0
ata_generic 6788 0
pata_via 9732 3
pata_jmicron 4992 0
pata_acpi 6016 0
libata 150048 6 sata_via,ahci,ata_generic,pata_via,pata_jmicron,pata_acpi
scsi_mod 95692 4 sg,sr_mod,sd_mod,libata
dock 9488 1 libata
...at last the grep glx
[z13l5ch31b3@fUn ~]$ cat /etc/X11/xorg.conf | grep glx
Load "glx"
I ve tried to install ia32-libs, read about it,... but there are no packages on AUR.
In the Zerowings - FAQ i was reading this:
Running 32 bit binaries on a 64 bit system
You need to install various 32 bit compatibility libraries. Most distributions have an all-in-one package that will provide everything you need.
On another thread in our forum, i found this (for ET:W http://bbs.archlinux.org/viewtopic.php?id=46846 ):
System:
Archlinux 64bit
32bit libs: (installed with pacman "What else cool")
lib32-glibc, lib32-gcc-libs, lib32-alsa-lib, lib32-libstdc++5, lib32-openal, lib32-libxdamage, lib32-libxfixes, lib32-sdl
but i cant find em on pacman,... or AUR.
Then i tried to download the lib32-libgl ... from here -> http://archlinux.org/packages/search/?q=lib32-libgl ... but its not online, too.
So what the heck is goin' on ? Why cant i run my ET:QW on Arch64 ? Any chances ?
At last my ET:QW lines:
[z13l5ch31b3@fUn ~]$ cd /usr/local/games/etqw/
[z13l5ch31b3@fUn etqw]$ ./etqw
ETQW 1.5.12663.12663 linux-x86 May 9 2008 13:50:52
found interface lo - loopback
found interface eth0 - 192.168.0.10/255.255.255.0
CPU: AMD CPU with MMX & 3DNow! & SSE & SSE2 & SSE3
ETQW using generic code for SIMD processing
enabled Flush-To-Zero mode
------ Initializing File System ------
Loaded pk4 /usr/local/games/etqw/base/game000.pk4 with checksum 0x3efd73a5
Loaded pk4 /usr/local/games/etqw/base/game001.pk4 with checksum 0xa02f1c18
Loaded pk4 /usr/local/games/etqw/base/game002.pk4 with checksum 0x87457e61
Loaded pk4 /usr/local/games/etqw/base/pak000.pk4 with checksum 0x442eb08b
Loaded pk4 /usr/local/games/etqw/base/pak001.pk4 with checksum 0x10e16e6
Loaded pk4 /usr/local/games/etqw/base/pak002.pk4 with checksum 0x8dbe7353
Loaded pk4 /usr/local/games/etqw/base/pak003.pk4 with checksum 0x99dfcabb
Loaded pk4 /usr/local/games/etqw/base/pak004.pk4 with checksum 0x7e49f838
Loaded pk4 /usr/local/games/etqw/base/pak005.pk4 with checksum 0x5ccc7213
Loaded pk4 /usr/local/games/etqw/base/pak006.pk4 with checksum 0x9edf1b7d
Loaded pk4 /usr/local/games/etqw/base/pak007.pk4 with checksum 0x74a1a2f
Loaded pk4 /usr/local/games/etqw/base/pak008.pk4 with checksum 0x71a93b80
Loaded pk4 /usr/local/games/etqw/base/zpak_english000.pk4 with checksum 0x977c7bd0
Loaded pk4 /usr/local/games/etqw/base/zpak_english001.pk4 with checksum 0x6583cd8
Loaded pk4 /usr/local/games/etqw/base/zpak_english002.pk4 with checksum 0x8dc70e3d
Loaded pk4 /usr/local/games/etqw/base/zpak_english003.pk4 with checksum 0xc2d7ed49
Loaded pk4 /usr/local/games/etqw/base/zpak_french001.pk4 with checksum 0x3bd7a062
Loaded pk4 /usr/local/games/etqw/base/zpak_french002.pk4 with checksum 0x79287190
Loaded pk4 /usr/local/games/etqw/base/zpak_french003.pk4 with checksum 0x8f315c7b
Loaded pk4 /usr/local/games/etqw/base/zpak_german001.pk4 with checksum 0xa694c3f1
Loaded pk4 /usr/local/games/etqw/base/zpak_german002.pk4 with checksum 0x64bee731
Loaded pk4 /usr/local/games/etqw/base/zpak_german003.pk4 with checksum 0x370e6186
Loaded pk4 /usr/local/games/etqw/base/zpak_korean000.pk4 with checksum 0xd42c084
Loaded pk4 /usr/local/games/etqw/base/zpak_korean001.pk4 with checksum 0x4de6a4e7
Loaded pk4 /usr/local/games/etqw/base/zpak_korean002.pk4 with checksum 0x15d2c9af
Loaded pk4 /usr/local/games/etqw/base/zpak_korean003.pk4 with checksum 0x4f8dfac1
Loaded pk4 /usr/local/games/etqw/base/zpak_polish001.pk4 with checksum 0x2575ff8e
Loaded pk4 /usr/local/games/etqw/base/zpak_polish002.pk4 with checksum 0x3ab92dd6
Loaded pk4 /usr/local/games/etqw/base/zpak_polish003.pk4 with checksum 0x8d9af876
Loaded pk4 /usr/local/games/etqw/base/zpak_russian001.pk4 with checksum 0xf3e91581
Loaded pk4 /usr/local/games/etqw/base/zpak_russian002.pk4 with checksum 0x38b1a37c
Loaded pk4 /usr/local/games/etqw/base/zpak_russian003.pk4 with checksum 0x7e90b040
Loaded pk4 /usr/local/games/etqw/base/zpak_spanish001.pk4 with checksum 0xd609566c
Loaded pk4 /usr/local/games/etqw/base/zpak_spanish002.pk4 with checksum 0xcf994ada
Loaded pk4 /usr/local/games/etqw/base/zpak_spanish003.pk4 with checksum 0xe7d989bc
Current search path:
/home/DerWanderer/.etqwcl/base
/usr/local/games/etqw/base
/usr/local/games/etqw/base/zpak_spanish003.pk4 (6 files)
/usr/local/games/etqw/base/zpak_spanish002.pk4 (119 files)
/usr/local/games/etqw/base/zpak_spanish001.pk4 (13 files)
/usr/local/games/etqw/base/zpak_russian003.pk4 (5 files)
/usr/local/games/etqw/base/zpak_russian002.pk4 (119 files)
/usr/local/games/etqw/base/zpak_russian001.pk4 (13 files)
/usr/local/games/etqw/base/zpak_polish003.pk4 (6 files)
/usr/local/games/etqw/base/zpak_polish002.pk4 (119 files)
/usr/local/games/etqw/base/zpak_polish001.pk4 (13 files)
/usr/local/games/etqw/base/zpak_korean003.pk4 (5 files)
/usr/local/games/etqw/base/zpak_korean002.pk4 (12 files)
/usr/local/games/etqw/base/zpak_korean001.pk4 (12 files)
/usr/local/games/etqw/base/zpak_korean000.pk4 (6 files)
/usr/local/games/etqw/base/zpak_german003.pk4 (5 files)
/usr/local/games/etqw/base/zpak_german002.pk4 (119 files)
/usr/local/games/etqw/base/zpak_german001.pk4 (13 files)
/usr/local/games/etqw/base/zpak_french003.pk4 (14 files)
/usr/local/games/etqw/base/zpak_french002.pk4 (119 files)
/usr/local/games/etqw/base/zpak_french001.pk4 (13 files)
/usr/local/games/etqw/base/zpak_english003.pk4 (7 files)
/usr/local/games/etqw/base/zpak_english002.pk4 (117 files)
/usr/local/games/etqw/base/zpak_english001.pk4 (9 files)
/usr/local/games/etqw/base/zpak_english000.pk4 (1018 files)
/usr/local/games/etqw/base/pak008.pk4 (1496 files)
/usr/local/games/etqw/base/pak007.pk4 (1510 files)
/usr/local/games/etqw/base/pak006.pk4 (3 files)
/usr/local/games/etqw/base/pak005.pk4 (2172 files)
/usr/local/games/etqw/base/pak004.pk4 (72 files)
/usr/local/games/etqw/base/pak003.pk4 (1133 files)
/usr/local/games/etqw/base/pak002.pk4 (1637 files)
/usr/local/games/etqw/base/pak001.pk4 (1067 files)
/usr/local/games/etqw/base/pak000.pk4 (9350 files)
/usr/local/games/etqw/base/game002.pk4 (3 files)
/usr/local/games/etqw/base/game001.pk4 (11 files)
/usr/local/games/etqw/base/game000.pk4 (3 files)
game DLL: 0x0 in pak: 0x0
Addon pk4s:
file system initialized.
----- Initializing Decls -----
Decompressing the global token cache...3566Kb
couldn't exec 'etqwconfig.cfg'
execing 'localization/english/defaultbinds.cfg'
couldn't exec 'etqwbinds.cfg'
couldn't exec 'autoexec.cfg'
Vendor: Device:
/proc/cpuinfo CPU frequency: 2998.37 MHz
parse /proc/cpuinfo for CPU information
2 logical, 1 physical CPU(s)
detecting video ram (set sys_videoRam on command line to override) ..
found XNVCtrl extension 1.17
Detected
1 3.00 GHz CPU
2032 MB of System memory
128 MB of Video memory on an optimal video architecture
This system qualifies for Low quality.
Initializing SDL subsystem
Loading GL driver 'libGL.so.1' through SDL
Desktop resolution: 1024x768
execing 'specs/minspec.dat'
execing 'specs/minspec_cpu.dat'
execing 'specs/minspec_gamedetail.dat'
execing 'specs/minspec_gpu.dat'
execing 'specs/minspec_gpudetail.dat'
execing 'specs/minspec_lighting.dat'
execing 'specs/minspec_foliage.dat'
Vendor: Device:
execing 'specs/minspec_foliage.dat'
Opening IP socket: localhost:-1
thread priority set to 1
Failed to open server license code file for reading.
SDL_ListModes:
1024x768 960x600 840x525 832x624 800x600 800x512 768x576 720x450 720x400 640x512 640x480
640x400 640x384 640x350 576x432 576x384 512x384 416x312 400x300 360x200 320x240
320x200 320x175
SDL_ListModes are currently ignored for resolution filtering. Set r_useSDLModes to 1 if you want it
WARNING: SDL_SetVideoMode failed: Couldn't find matching GLX visual
------- Initializing renderSystem --------
----- R_InitOpenGL -----
signal caught: 'Segmentation fault', si_code 1
callstack:
0x0
[0x082e80e1]
[0x082e549d]
[0xb7f9140c]
Trying to exit gracefully..
--------------- BSE Shutdown ----------------
Shutting down SDL subsystem
idRenderSystem::Shutdown()
I really hope yo can help me. Thnx for reading...

z13l5ch31b3 wrote:
skottish wrote:
z13l5ch31b3 wrote:AUR is on my mirrorlist.
AUR can't be on your mirror list. There are no binaries there. The packages that have binaries from AUR are in community.
Ive added with "nano /etc/pacman.d/mirrorlist" the "Server = http://repo.archlinux.fr/i686" at the end of the list. If i am typing "yaourt armyops" , the repository of the correct package will be shown. So AUR is on my mirrorlist or not ?
Can i install the lib32 version without deleting the 64bit driver ?
me wrote:AUR can't be on your mirror list. There are no binaries there. The packages that have binaries from AUR are in community.
And no, lib32 versions will not overwrite 64 bit libraries.
pacman wrote:[skottish@iasE ~]$ pacman -Ss | grep lib32
community/lib32-alsa-lib 1.0.17a-1 (lib32)
community/lib32-atk 1.22.0-1 (lib32)
community/lib32-cairo 1.6.4-1.1 (lib32)
community/lib32-catalyst-utils 8.8-1 (lib32)
community/lib32-dbus 1.2.3-1
community/lib32-e2fsprogs 1.40.8-1.1
community/lib32-expat 2.0.1-1.1 (lib32)
community/lib32-fontconfig 2.6.0-2 (lib32)
community/lib32-freetype2 2.3.7-1 (lib32)
community/lib32-gcc-libs 4.3.2-1 (lib32)
community/lib32-glib2 2.18.0-1 (lib32)
community/lib32-glibc 2.8-3 (lib32)
community/lib32-gnutls 2.4.1-3 (lib32)
community/lib32-gtk2 2.12.11-3 (lib32)
community/lib32-libart-lgpl 2.3.20-1 (lib32)
community/lib32-libcups 1.3.8-2 (lib32)
community/lib32-libdrm 2.3.1-1 (lib32)
community/lib32-libgcrypt 1.4.2-1 (lib32)
community/lib32-libgl 7.0.3-2 (lib32)
community/lib32-libgpg-error 1.6-1.1 (lib32)
community/lib32-libice 1.0.4-1 (lib32)
community/lib32-libjpeg 6b-4 (lib32)
community/lib32-libpng 1.2.31-1 (lib32)
community/lib32-libsm 1.1.0-1.1 (lib32)
community/lib32-libstdc++5 3.3.6-3 (lib32)
community/lib32-libtasn1 1.5-2 (lib32)
community/lib32-libtiff 3.8.2-4 (lib32)
community/lib32-libx11 1.1.5-2 (lib32)
community/lib32-libxau 1.0.4-1 (lib32)
community/lib32-libxcb 1.1.90.1-1 (lib32)
community/lib32-libxcomposite 0.4.0-1 (lib32)
community/lib32-libxcursor 1.1.9-1 (lib32)
community/lib32-libxdamage 1.1.1-1 (lib32)
community/lib32-libxdmcp 1.0.2-1 (lib32)
community/lib32-libxext 1.0.4-1 (lib32)
community/lib32-libxfixes 4.0.3-1 (lib32)
community/lib32-libxft 2.1.13-1 (lib32)
community/lib32-libxi 1.1.3-1 (lib32)
community/lib32-libxinerama 1.0.3-1 (lib32)
community/lib32-libxml2 2.6.32-2 (lib32)
community/lib32-libxmu 1.0.4-1 (lib32)
community/lib32-libxrandr 1.2.3-1 (lib32)
community/lib32-libxrender 0.9.4-1 (lib32)
community/lib32-libxslt 1.1.24-1 (lib32)
community/lib32-libxt 1.0.5-1 (lib32)
community/lib32-libxtst 1.0.3-1 (lib32)
community/lib32-libxxf86vm 1.0.2-1 (lib32)
community/lib32-lzo2 2.02-3.1 (lib32)
community/lib32-mesa 7.0.3-2 (lib32)
community/lib32-nas 1.9.1-2 (lib32)
community/lib32-ncurses 5.6-8 (lib32)
community/lib32-nvidia-utils 177.80-1 (lib32)
community/lib32-openal 0.0.8-4.1 (lib32)
community/lib32-opencdk 0.6.6-1.1 (lib32)
community/lib32-pango 1.20.5-1 (lib32)
community/lib32-pciutils 3.0.0-2 (lib32)
community/lib32-pcre 7.8-1 (lib32)
community/lib32-pixman 0.12.0-1 (lib32)
community/lib32-qt 4.4.2-2 (lib32)
community/lib32-qt3 3.3.8-9 (lib32)
community/lib32-readline 5.2-8 (lib32)
community/lib32-sdl 1.2.13-1 (lib32)
community/lib32-zlib 1.2.3.3-2 (lib32)
Last edited by skottish (2008-10-10 18:25:34)

How to create a circle with the origin not at (0,0)

I want to create a circle but the origin is not at (0,0).
I have the following data;
- point coordinate (X1,Y1)
- radius of the circle
Also, I want to create a line between the origin and the point (X1,Y1).
Kindly show me how can I do this. Thank you very much.

The accuracy of the GPS Receiver is +/- 0.5 meter. Its a Novatel product (Flex Pak). I am getting the string data from the GPS receiver. I took the Longtitude data as for my X and Latitude data for my Y. I took the Longtitude and Latitude data from the center of post for my reference calculation only to get the true value of X and Y at the end of the boom. I call the X and Y value at the end of the boom as dynamic because it always give me the value wherever the boom goes. Please see the attached sample VI's.
At one point , I actually measured, using a tape measure, the distance from the end of the boom to the center of post and i am getting the correct radius. But when I rotate the boom on the other side it will give me a different radius. And looking at this radius value, while rotating the boom, I can judge that my point of origin is not (0,0).
At this point I have no idea how to get the correct origin. Kindly teach me if you have idea on this.
Do you think the way I calculated for the true value of X and Y is still correct? Is my reference too far?
Thank you very much.
Attachments:
plotting xy graph 1.vi ‏22 KB
dynamic xy calculation.vi ‏28 KB
dynamic radius calculation 1.vi ‏15 KB

MY CREATIVE ZEN M NOT DETECED BY WINDOWS OR ZEN ME

HELLO, i have a serious situation here. i had my zen for about 3 months and i love it. but about 2 weeks ago, i wanted to transfer new music and video to my player. i noticed at first that not all my music shows in my zen media or my windows media. i do have all the componets to my cpu. i have windows xp serivce pak 2 and i have windows media 0. well n-e way, i also have real player. i pulled real player and i noticed that every piece of music and video i have was there. so i decided to sync it to my device using real. at first it transferred, so of course i get ready for bed and i noticed it was taking a while. so i figured when i get up it will be done. well it wasn't, it only transferred four songs and it downloaded everything from my cpu to my device. i had folders in there that i never seen. so i figured let me delete everything and start over, but using windows media. when i did that, it tells me that windows media player does not detect a portabel device, connect your device, and then try again. so i clicked on the web help option that comes with that error to see if they can give me some info. it gives me a code c00d79 and that is the reason why it is not connecting. so i searched the internet to see if i can anything comes under this code, join discussions and also email creative. alot of info i have found in the codes, but not this paritcular one. then i called dell techincal support because that is where i purshaced my zen. they couldn't help me. so today i went to the knowledge support and i found info on the same problem that i am experiencing. so i did everything. checked the device manager. my comp reads that the zen is there, but windows and media doesn't. so i did the back up regristy and also for the usb, still nothing. so it says to contact tech support and of course, there is none, unless u pay a fee. i work long hours and the hours are impossible for me to contact. the only way is if they work weekends and they dont. i am lost at this point. it will be 3 weeks exactly tomorrow that my zen is not working. i can not go another day without my device. i am starting to think i need to return my device for a new one. this is my last option. PLEASE HELP ME!!

Anyone who can help?
Please!
At least give me some ideas please.

Zen Vision M...USB Device Not Recognized

My Zen Vision M 30g?is no longer recognized by my computer. I get the following message: "USB Device Not Recognized: One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it." I haven't changed anything on my computer (Windows XP Home Edition SVC Pak 3), so I don't know why it would not recognize my player all of a sudden. My zen still plays and charges using the portable charger, so it is still usable; however I can't change anything on the player. So far I've tried disc clean up, changing USB ports and plugging it into another computer (got the same message). I haven't seen anything on the bulletin board about "malfunctioning." Does this mean my zen is done?

Thanks. I keep getting directed to that knowledge base page, but it is not addressing my problem. My computer immediately tells me that the device has "malfunctioned" and the computer does not recognize it. I only have the usb cord that came with the zen, so I don't have another one to try. I love my zen and have staunchly defended it over the years vs. an i-pod. However, this is my 2nd one in 5 years. (The first one fried itself, but fortunately was still under warrantly.) Sadly, I, too, am considering moving on. I onlyreceived generic help fromthe Creative SupportTeam (who ultimately told me my zen is "unrepairable" when their one-size-fits-all solutions didn't work).Since there seems to be an overwhelming # of people experiencing similar problems, maybe the time is right to make the change, especially since an iPod classic 60 GB (7th Generation) is quite affordable these days.

X3-02 in pak or not?

Similar Messages

Maybe you are looking for