X6 Bugs, Bugs Bugs.....@ Firmware 12......

Okay, new FW, but, always a lot of Problems. Bugomtimes, the Loudspeaker does not go on, eg. selecting a new Ringtone, the Preview is not played over the loudspeaker, it comes from the Normally-Phone-Earspeaker. Same with Voice Dialing, the Reply of the command comes not from the Loudspeaker, it comes from the built in Earspeaker too.Reboot device, all is okay. Next Bug, Select a Caller Group/-a Private-Profile, to filter unwanted Callers. ok. Done. Now it goes crazy, if a Caller rings, which is not in the Group, the Ringtone is off, thats okay. BUT, the Vibration turns on. Why ? If i want that the phone rings only by wanted callers in the current Profile, then it should do that. Next Bug: WLAN...the device find my WLAN and marked it as "knowed", 5min later it is "unknown" and i have to set the WPA Key again and the Phone stores the WLAN as a new one. Next Bug, Somtimes the Media-Sensor does not Pop up the Media-Bar, the Phone recognizes the button (BeepTones are on) but nothing happens. Reboot Device, the MediaBar is now there...but how long?...Bugs Bugs Bugs Bugs Bugs and a lot of other one. I feel me like a Beta-Tester for Nokia. Who can help me ? greetings Thomas

Hi, its me again, please allow me a last Question-other Function, Bug, or is that what, what i do not understand......Contacts, Voicedialing. I say the Name to Dial. Phone recognize the Name, but, it wants to Dial the Email from that contact. Or, it wants to dial the Video-Call, but, no Number for videoCall is in the Contacts, i don't have Video Calls. I go to Contacts, select the Phonenumber, select STANDARD, select apply Mobilnumber as Standard, now the Numbertype, in that cases Mobilephone, is now underlined. Video: empty. I speak the Name, Phone says the Name and selects EMail. I remember to my E90, there were no Problems with Voicedialing. In a Contact, i delete the Detail -Videocall- , the Field disappears, i click apply, close contact. Open it again and the Field Videocall is already there. I speak the Name, Phone says the Name, but, it takes videocall, which is empty, or, it try's to make a videocall with the number which is set in the Mobilphone-Field, and, after dialing, error, because i have no video-sim-card. So, the contact is not dialed. That all is a big Problem, if the Phone is in the Bag, i use my Headset, and the Phone try's to open the E-mail Editor or a videocall. Yes, (!) -Sometimes- (!) i can select after the voicecommand another entry of the spoken Contact, but , if i go by car........ hello...is anybody there from Nokia ? I need one guy to tell him, what i mean about the x6.......or, if i make anything wrong, i excuse me........and...to the end...What is in a Contact the Option: -Synchronization- /Public/Private/, i found nothing about that
I have tried to copy the Phonenumbers via OVI Suite to the other Fields, that i get a Standard, i think, i can't make it.......Thanks for your time, you are the first one, which try's to help me, why is it not possible to talk about that Problems with a Nokia-Hotline...... kind regards ...Thomas

Similar Messages

N95 bugs: firmware addressable ?

Hi -- I've been playing with the N95 in Singapore for a few days now, and I absolutely love the features, and to think of the endless possibilities.
The bugs I have found so far are:
1) High-pitched sound/noise in earpiece almost at all times. This is really annoying, and is less evident if the phone has been lying idle for a while. I first thought it only occurred when the screen was lit, but now I realise that it only subsides if the phone has been idle for some mins. (maybe shuts down some process?) --- I really hope this can be addressed, because this is a killer in making the phone pleasant to use. Anyone else face this problem ?
2) "Silent" mode isn't really silent. Of course we all carry our phones to our offices and want to try out the features in an idle moment. But in silent mode, the phone still makes beeps from the camera and plays out music on the loudspeaker! Embarrassing ;-)
3) Low battery power: The phone dies in a day or less than a day. Will there be new higher-powered batteries available someday ? How can I conserve power ?
Are these bugs fixable in firmware ? How do I check firmware version on the N95 (#0000# doesn't seem to work) ?Message Edited by gadget_adapter on 05-Apr-200704:14 AM

Given the phone's only been out a few days, I guess the firmware would be recent, lah!
Re the issues with "silent" mode: sounds to me that's how it is designed to work. For some reason Nokia have been making it more and more difficult to suppress the camera noise on all their phones. Sometimes turning of keytones works. You'd expect the music player to work, even in silent mode: that's really about not ringing or buzzing ..
As for the battery, what a surprise! An N-series with lousy battery life? Who'd-a-thought?
Unfortunately, you're just going to have to learn to live with lousy battery life: all of the N- and E-series phones have this. There's not going to be a new, higher powered battery for the N95 - at least, not anytime soon. I believe the N95 already comes with the latest, highest powered battery and since it hasn't been retro-fit to other phones, I'm guessing when the next battery comes along, it won't be retro-fit to the N95.
All you can do is optimise the phone to minimise the power it uses. That basically means turning of features you're not using. Here's my list of things you can do to save battery on the N80 - I guess the list will be pretty similar for all of the N- and E-series phones:
- turn off bluetooth when not in use
- set Network mode to GSM only
- set Wireless LAN Show Availability to Never
- set Sleep mode on
- reduce the screen brightness
- reduce the power saver time out time
- reduce the light time out time
I guess with the N95, you should also add:
- turn off the GPS when not in use
.. if you can do that.
This will make a small difference, but at the end of the day your best bet is to either carry a charger with you or have lots of chargers littered about the places you go: home, the office, the car (if you're rich enough to have one in Singapore, you can afford a bunch of chargers!) etc.
You might also consider buying a spare battery - I'm sure you can get one for like 10 bucks at Sim Lim Square.Message Edited by patc on 05-Apr-200708:59 AM

WRT54GS V6 Bug - QoS Bug Firmware v1.50.9

In the QoS section i tried to setup a Entry for my VoIP Packet 8 Phone and when i Enable Qos and under "Device Priority" i enter the MAC address of my VoIP Phone adapter and set the priority to high. I have the Upstream Bandwidth set to Auto and when i click save setting it tells me that the Bandwidth is out of range must be 64-100000. But it is set on AUTO and the Bandwidth box is Grayed out so you cant type in the box. So it is a Bug for sure.
I can set the Upstream Bandwidth to Manual and type in a number between the 64-100000 and then set it back to Auto and it retains the number even though it grays it out then it will let me save it.
So i guess the AUTO is not AUTO.
I have firmware 1.50.9

can your wireless pc still see your ssid after the upgrade? after the upgrade you may had reseted the router. what error message are your getting?
Make sure that the wireless settings are all configured correctly.

[N95-8GO] Screen Bug, Firmware Problem ?

Hello,
I have many severs screen bug with my N95 8Go.
Firmware is V35.0.001
Phone info is RM-320.
Since yesterday, my screen lighting going off and the screen become black, zoomed or pink in random times. The screensaver is always flashing.
I think it is a FW bug, because my phone has sudden no shocks and the screen connector is correctly linked and no oxidation are present.
What you think about it ?
Do I reinstall the FW to fix this bug ?
I can't downgrade because it's the lastest FW version.
The phone isn't new, I buy it in operator store two years ago.
PS : I am French, and I am sorry if my English is so terrible

67Stras wrote:
Hello,
I have many severs screen bug with my N95 8Go.
Firmware is V35.0.001
Phone info is RM-320.
Since yesterday, my screen lighting going off and the screen become black, zoomed or pink in random times. The screensaver is always flashing.
I think it is a FW bug, because my phone has sudden no shocks and the screen connector is correctly linked and no oxidation are present.
What you think about it ?
Do I reinstall the FW to fix this bug ?
I can't downgrade because it's the lastest FW version.
The phone isn't new, I buy it in operator store two years ago.
PS : I am French, and I am sorry if my English is so terrible
Have you installed any theme into your phone recently? Some themes, which come from unreliable sources, cause problems like this.
If you haven't installed any theme, it's probably a hardware problem. So, you will have to take your phone to a Nokia Care Point.
If you want to thank someone, just click on the blue star at the bottom of their post

N78 fm radio transmitter firmware bug (firmware 20...

Hi everyone, I just updated my N78 with the latest firmware (20.149). A few features of the FM transmitter stopped working (they worked with the older firmware).
In particular:
1. Now I cannot use the FM transmitter to listen to the streaming audio (e.g. from internet radio stations) to my FM radio. Instead of transmitting the signal to the FM radio, it just lowers the volume on my phone and no signal to the radio: just the intermittent beep that is transmitted when no audio is on the phone. (It used to work!)
2. The FM transmitter only sends the signal coming from the Music Player, not from third party applications (or from the gps application)
3. It seems the FM transmission power has decreased dramatically. With the older firmware I could listen to the radio keeping the phone a couple of meters from the receiver. Now I need to put it a few CENTIMETERS from the antenna, otherwise I hear mainly static!!
These bugs have made the FM transmitter useless on my phone.
I hope they'll be fixed soon.
Thank you,
Lor

Hi there, thankyou for your report on the bugs, here is my response (I too have updated to the latest v20.149 firmware):
1. this streaming internet radio feature has been removed since firmware 12.046 and has not appeared since. i believe, along with many other users here, that this is due to copyright issues, so by deactivating streaming of internet radio they are complying with appropriate copyright controls. it would be nice to stream internet radio through the FM transmitter but this probably will not come back
2. I found the same thing, i really do wish that it would stream all sounds from the phone, especially from the Maps application because the speaker is tinny. so maybe they can do something about this in subsequent firmware updates.
3. I find that the FM transmission power is variable, and not has increased/decreased with firmware updates. this is due to many factors, for example, it is summer here in Australia, and i have found that on really hot & hot and humid days that the FM transmitter struggles to send an adequate signal. hgowever, on cooler days the signal is strong and works well. I have tried this on both my car and standalone stereo in my home.
I hope these help you shed a bit more light on the issues, but I am as always holding out for the v30 firmware very soon

NOKIA 2710 - bug firmware 09.67

I update my nokia 2710 navigation edition to 09.67.
Now bluetooth doesn't work (yes is no available) and gps is always in "looking at current position"... with a-gps too.
HELP!!

The Vedio recording is too too low volume when playback i think it's a bug must be fixed please waiting new updtaes from great nokia team.
any info.
Regards

Firmware bug: CPU1 tried to use APIC500

Every time I want to use the computer (HP Compaq 6005 Pro small form factor) I have to switch it on and then push the reset button after booting up to a black screen.
I once got :
Firmware bug: CPU1 tried to use APIC500 (LVT offset0) for vector 0x400 but the register is already in use for vector 0xf9 on another CPU.
Any ideas?
Is Linux reporting a real firmware fault or is it wrong?

Hello anonio-mouse,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you are getting the [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu. I have looked on the Ubuntu site and under the Bugs section I found the bug [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is alrea... so it looks to be a geniune error and is being addressed on the Ubuntu site.
I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Enjoy your weekend!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

BUG REPORT FIRMWARE 5.1.7 PLEASE FORWARD TO SUPERVISOR....

BUG REPORT FIRMWARE 5.1.7 PLEASE FORWARD TO SUPERVISOR.
The spa-3102 has the following two bugs.
When the unit sends a hook-flash to the fxo port it:
a) does not send the hook flash to the fxo port for PSTN Hook Flash Len: Instead it uses a very short pulse of about 100ms or 1/10 of a second. It should honor the PSTN Hook Flash Len configurable parameter of .2 – 1.5 seconds.
b) Does not change the line voltage from –7 (off-hook) to –48(on-hook) during a flash-hook to the fxo port. Instead it varies the voltage only by about 2.5 volts.
This was reported as early as June 07 to linksys support. It is reported they agreed and would fix in the next firmware release. There is info that firmware 5.2 being released and is this fix in 5.2 and how can I get it.

Although the problem is still not solved, at least I now know WHY the problem is happening... and Apple's Firmware Update is NOT to blame!
Through a series of coincidences, I was actually lucky enough to get in touch with the engineers in Apple's Airport firmware division, and they were helping me to nail down this problem.
Turns out that Apple takes great PRIDE in the fact that they are one of the VERY FEW manufacturers who make routers that behave properly in this regards: they SPECIFICALLY test for their Airport Extreme routers to allow you to connect to servers behind the NAT by way of the public WAN IP address of the NAT box. This is the way that apparently the NAT/DHCP specification is SUPPOSED TO WORK! You're SUPPOSED to be able to connect this way, if you so desire.
So what was causing the problem on my network, then?
Something I hadn't thought about... the Vonage Linksys RTP300 router that we're using for our Vonage VoIP service. Turns out that this router does NOT support clients behind the NAT connecting to servers behind the NAT by way of the public WAN IP address.
Linksys is to blame, not Apple!
And apparently, this feature may have actually been working in an earlier
firmware update, but apparently, Vonage AUTOMATICALLY pushes firmware
updates to RTP300's, apparently without user notification:
<http://www.vonage.com/help.php?article=1066&category=90&nav=5>
And a forum thread on vonage-forums.com seems to indicate that the 1.00.60 firmware in the RTP300 started getting pushed to customer units on or before 1/26/06, making it less than a month after Apple shipped the 5.7 firmware update for AirPort Extreme Base Stations:
<http://www.vonage-forum.com/ftopic10915.html>. So if the problem cropped up then, it's possible that I accidentally attributed it to Apple when really the RTP300 got a firmware update around then too which may have broken this feature (assuming it was working before then).
Power Mac G4 QuickSilver Dual 800 MHz Mac OS X (10.4.4)

BUG: Playback Fails When Loading A Random Video - Firmware 1.2

I've been looking all over on where to post a bug, and for a fix for this bug I found. Not many seem to be having this problem (I assume not many are trying to randomly play a video from a video playlist)
BUG: Playback Fails When Loading A Random Video
iPod FIRMWARE: 1.2
PROBLEM (1): When pressing "Play" on a video playlist or on 'Music Videos' while the iPod is set to Random->Song, the iPod displays a white playback screen, displays song 0 of 0, empty duration bar and a duration time of 0:00/-0:00.
PROBLEM (2): After successful playing a seleted video within a video playlist or music video list, the iPod attempts to play a randomly choosen video (HDD clicks abnormally) but times-out and returns the user to the Playlist selection screen.
iPod MODEL: 60GB Video - Black [Bought in NOV 05]
If anyone knows how to report a bug, or anyone else having this problem (Try it on you iPod, post your results!) let me know!

I've been looking all over on where to post a bug...If anyone knows how to report a bug let me know!
If you want to post a bug report for Apple to see, then this wouldn't be the place to post it (Apple employees rarely look on these forums; all other regular posters on here are just users that like to help others).
To tell Apple about this, select "Bug Report" under "Feedback Type" on their Feedback form for iPods here -> iPod Feedback
I hope this helps you,
-Kylene
If any post helps or solves your issue, please mark it that way accordingly. Thank you for helping the boards!

WRT120N Latest firmware BUG & PATCH

Hello,
I just bought a WRT120N Wireless Access Point. I upgraded its firmware to the latest available (v1.0.04) but there is a BUG in the "Applications & Gaming" section. In particular, in the "Single Port Forwarding": two applications with the same internal port, even with different IP addresses, can be added and the error message is "Port Number is duplicate.".
This behavior is incorrect and can be explained with an example: let us assume we have two web server behind the NAT. Both are listening on the default port 80/tcp and have address 192.168.1.2 and 192.168.1.3. It is possible to forward the data received by the router on port 80/tcp to the web server 192.168.1.2 and the data received by the router on port 8080/tcp to the web server 192.168.1.3. This is allowed because everything is unique: if the router receive a packet on port 80/tcp it have to rewrite the destination IP address and insert 192.168.1.2 while if it receive a packet on port 8080/tcp it have to rewrite the destination IP address and tcp port (192.168.1.3 and 80). It is irrelevant that final port destination is the same. Of course, it is important that the two rules have a different external port: otherwise the router could not distinguish between them but the internal port is irrelevant (as long as two rules are not identical).
The BUG is circumscribed in the JavaScript since I tried to "nop" the wrong check with Firefox/Firebug and the rules are correctly memorized in the configuration and they works without issues.
I Fixed the JavaScript and, in the following, there is the patch. Actually, this patch does not solve another minor BUG: theoretically it is possible to redirect two different external ports to the same couple internal IP/port. The solution is trivial too, but this would require rewrite a larger portion of code, so I decided to not fix this minor BUG because it is less severe and the scenario is less common.
This BUG seems tightly related to http://forums.linksysbycisco.com/linksys/board/message?board.id=Wireless_Routers&message.id=85768&query.id=245618#M85768 but that one is on another router/firmware (that I do not own) so I do not know if this patch apply to that BUG too.
Please let me know if you need further informations
Marco Papa Manzillo
----------- Patch -------------
diff -ur 192.168.167.1 2/index.htm 192.168.167.1/index.htm
--- 192.168.167.1 2/index.htm   2010-01-05 13:39:59.000000000 +0100
+++ 192.168.167.1/index.htm     2010-01-05 14:32:00.000000000 +0100
@@ -535,9 +535,10 @@
var fNameHead = "gport_external";
var fNameTail = "gport_internal";
+var fNameIP   = "private_ip4_";
var applicationName = "application";
var appname = "";
-var i, rs, rs2, j, index, numProtocol, temp;
+var i, rs, rs2, j, index, numProtocol, ipv4_private, temp, temp2;
for (i = 0; i < F.elements.length; i++) {
f = F.elements[i];
@@ -548,11 +549,15 @@
continue;
        }else {
temp = "protocol" + f.name.substring (fNameTail.length, fNameTail.length + 2);
+temp2 = fNameIP + f.name.substring (fNameTail.length, fNameTail.length + 2);
}else {
temp = "protocol" + f.name.substring (fNameHead.length, fNameHead.length + 2);
+temp2 = fNameIP + f.name.substring (fNameHead.length, fNameHead.length + 2);
numProtocol = document.getElementsByName(temp)[0].value;
+ipv4_private = document.getElementsByName(temp2)[0].value;
+
if (f.value.length == 0)continue;
@@ -584,7 +589,7 @@
if(rs2=="1") break;}
-rs = checkDuplication_PortRange3 (F, f, numProtocol, fNameHead, fNameTail, 0, 15);
+rs = checkDuplication_PortRange3 (F, f, numProtocol, ipv4_private, fNameHead, fNameTail, fNameIP, 0, 15);
if (rs == true||rs2 == "1") {
alert (msg_alert_0038);
//f.value = f.defaultValue;
diff -ur 192.168.167.1 2/jslib.js 192.168.167.1/jslib.js
--- 192.168.167.1 2/jslib.js    2010-01-05 13:35:03.000000000 +0100
+++ 192.168.167.1/jslib.js      2010-01-05 15:27:11.000000000 +0100
@@ -549,19 +549,21 @@
        return false;
//rob. 2009.0325 also check protocol type when submit form.
-function checkDuplication_PortRange3 (F, f, numProtocol, fNameHead, fNameTail, startCount, maxItem)
+// Marco Papa Manzillo 2009.0105 also check internal IPv4 for internal port when submit form
+function checkDuplication_PortRange3 (F, f, numProtocol, ipv4_private,fNameHead, fNameTail, fNameIP, startCount, maxItem)
        if (fNameHead.length == 0)      return false;
        if (fNameTail.length == 0)      return false;
        if (f.value.length   == 0)      return false;
        var fPort1 = new Array (null, null, null, null);
-       var tmpName1, tmpName2;
+       var tmpName1, tmpName2, tmpName3;
        var fProtocol = "protocol";
        var tmpProtocol;
-       var a, a2, b1, b2, ck=0,rs;
+       var a, a2, a3, b1, b2, b4, ck=0,rs;
        a= parseInt (f.value);
        a2=parseInt (numProtocol);
+       a3=parseInt (ipv4_private);
        tmpName1 = "";
        if (f.name.substring (0, fNameHead.length) == fNameHead)
@@ -575,19 +577,21 @@
                tmpName1 = fNameHead + i;
                tmpName2 = fNameTail + i;
                tmpProtocol = fProtocol + i;
+               tmpName3 = fNameIP + i;
                if (f.name == tmpName1 || f.name == tmpName2)   continue;
-               rs = DynamicGetField (F, 3, tmpName1, tmpName2, tmpProtocol, "", fPort1);
+               rs = DynamicGetField (F, 4, tmpName1, tmpName2, tmpProtocol, tmpName3, fPort1);
                if (rs == false)        continue;
                b1 = (fPort1[0].value.length == 0) ? 0: parseInt (fPort1[0].value);
                b2 = (fPort1[1].value.length == 0) ? 0: parseInt (fPort1[1].value);
                b3 = (fPort1[2].value.length == 0) ? 0: parseInt (fPort1[2].value);
+               b4 = (fPort1[3].value.length == 0) ? 0: parseInt (fPort1[3].value);
                if (ck==0)//check tail
-                       if (a == b2)
+                       if (a == b2 && a3==b4 ) // Internal IP must be checked only for internal ports.
                                if ((a2 == 99)||(a2 == b3)) return true;

First of all I would suggest you to reset the router for 45 seconds and reconfigure all the settings again as you have upgraded the router's firmware.
What is the IP address you are getting from the modem...?
What happen when you connect the computer directly to the Modem..?
Do not load the backup config file on the router.After resetting the router,reconfigure all the settings again.

Firmware update reduced features, increased bugs 2...

Hello, i updated my Nokia 2700c firmware last night in the hopes that it might get rid of some bugs that i found very irritating after the last forced update by the Nokia care (after a problem with the phone, instead of reinstalling the same version they updated it instead).
But the bugs have now grown in number as well as a bit more serious now.
--The phone now doesn't read the name of a contact, in the from field in sms or call list which has more than one number saved or even randomly, some numbers have it displayed, some don't.
--The media player starts playing a song after a 5sec lag in which the phone is unusable, like if i am texting at the same time, it would stop responding,
this becomes worse by the balance notifications after every sms by my operator, in which case it notifies by sounding the sms tone 2 times but now with a 5sec gap in between while playing music, thus making the fone pretty much useless for those 15secs.
--The screensaver functionality is gone.
--The main menu has a menu option repeated one more time, which i never used in the first place.
--The T9 text entry has a lot of bugs with the order of matched words.
--The transition effects have all gone slow, thus prompting me to switch them off.
I can live with the last four but the first 2 i've listed have completely turned me off. Why isn't adequate testin done before releasing an update?
The first version of the device was 7.15, which was updated to 7.80 and this latest one is v9.95(?) i guess they even typoed the version number in this one (9 instead of 7) cause it doesn't look like such a major 'upgrade'.
Please tell me is there any solution to these problems?? Or am i stuck with these bugs for good?
Thanks.

Update: Managed to fix the second issue by a hard reset.

N95.firmware 21.0.016 bugs!

hi all.
nokia,thanks for new firmware and flash lite3 and web runtime.
but old bugs are still stay and didnt solve.
after auto focus and capturing,screen is black for afew seconds.
the tone of second camera is broken and crashed.
standby time dosnt have a appreciable change.
the menu layer dosnt change.
n-gage program is like v.20.0.015(it isnt bug)
map version is still 1.00(it isnt bug)
we anticipate many new feature and difference from v.20.0.015!!!
NOKIA means:Night Of King In Alone

listen n95 users who updated their firmware to v21.
when i learned yesterday that v21 was out, i didnt wait another second to get the new firmware. like most of you guys would do. i made a back up of my files first and then downloaded the freshly brought out upgrade.
the flash 3 support was cool and the web runtime. the phone seemed to work faster too.
but the next 2 thing ill tell you is something what i would call very saddening about this upgrade.
1. the camera flash lights doesnt work anymore. even if you set it on force flash
2. today ( 2nd day of v21 in possession) my phone stopped working and the screen went all black. i thought my phone crashed so i did what i usually do when it happens. i pulled the battery out for about 3 mins but the screen remained black. fyi, a phone that's turned off shows a blank screen. i put it back, same story. my phone is dead and i couldnt turn it on anymore. i immediately drive by the nearest nokia point center and ask if they could fix it. i had to leave my phone there for inspection and reparation. that means i would be able to use it for a couple of days. and this is very tragic.
is there anyone there that encountered the same problem?
piece of advice to those who havent have theyre phone upgraded: wait a couple of days first, and listen to what those who downloaded v21 on their phone. v21 is what i call DOWNGRADE in this matter. im very disappointed with this new firmware....

Zen Micro Photo bugs need to be worked out - firmware update comi

Hi,
I've had my Zen Micro Photo 8gb for a month & have discovered some interesting quirks: first, I don't believe mine is defecti've, though I've had problems. I have encountered freezing on both the "Zen Microphoto" logo and "rebuilding library" screen; I scoured this forum and the Knowledge Base for answers, trying all that seemed applicable?- I tried disk cleanup and reboot (leading to rebuilding library freezes), reformats & carefully reloading the latest firmware?a couple of times. I've drawn some conclusions:?) Mediasource software is not working for me; when I switched to using only Windows Media , most problems went away.2) For whatever reason, "rebuilding library" can only be accomplished while my Zen is connected to the computer - should this be the case?3) It seems like the times my screen freezes on the "Zen Microphoto" logo I may have held the "on" switch to the side a little longer than necessary; I'm wondering if this is happening because I'm holding the switch on a little too long?Anyway, I love the size, look and sound of this player, so I hope to keep using it. NOTE: can anyone from CREATIVE tell me if there will be future firmware updates? Thanks
!!! Steve M.Message Edited by smills on 08-0-20070:24 AM

I run windows XP pro . sp2, its quite strange.. it should work. ! **bleep** IT SHOULD WORK ! :smileyindifferent: , and the wirld thing is. i also try'ed it on another windows XP machine at work.. and it didient work there either. im beginning to question if this is the product for me. its realy sad though, i love the zen design.. not to mention the price.
It realy realy bugs me that the zen micro photo isset supportet on windows 2000, i had this vision of syncronizing my work calender with the zen ... and now its just not possible ! unless my boss wants to give me a new laptop.. and i dont think that will happen . hehe
Well i will keep on working on this issue.. ill let you know guys.

Access Restrictions bug of firmware 1.01.1 for WRT54G V5 V6

I am using WRT54G V5.
The Access Restrictions function won't work properly when using firmwares 1.01.1 and 1.01.0. Ports can't be blocked by using the "Blocked Services" in this function.
Now I have to switch back to 1.00.9 to make the port blocking work, but there is a DHCP server issue which could only be fixed in 1.01.0 or above.... Could someone fix this BIG BUG and roll out a new firmware????
Thanks a bunch.
Message Edited by Dennis_Hsu on 01-08-200705:02 PM

What is your Fragmentation and RTS threshold value? I'm not sure if I'm reading your message right, but it says as far as I can understand 30. The value should be 2304 instead for both.
Ty changing the wireless channel also to either 1, 6 or 11.

Does newest N80 firmware fix T9 dictionary bug?

My N80 firmware has been updated already twice in my local service point (Finland) for the same reason: in some phase of usage it stops saving new words to dictionary.
When writing SMS and entering a new word, it remembers that new word during the same message writing. When opening a new message to write, the word is no longer in use (not included in dictionary's suggestions).
First firmware update didn't fix the problem - I keep thinking because I restored a full backup from memory card - maybe restored also faulty dictionary file?? Don't know is that a file that is includes in full backup.
Second update: I didn't restore anything and "teached" the new words all over again. Now the dictionary has stopped working again!
I checked my current firmware: 4.0623.0.41 (build 26-07-2006)
Ran software update availability check: available version 4.0623.0.42 (build 20-09-2006).
I really wonder why my local service point hasn't put the newest firmware for me, think this new version has been out ages ago (yes, I do realise that build date is different that release date). These firmware re-installations (because the version hasn't changed from the version which was on the phone when I bought it on April 07) have both been done after May 2007.
Now, the question is, if I go to the service point, should they have this version 4.0623.0.42 available to my phone? The second time (in June) when I asked the newest possible version, this .41 was installed again - so can someone from Finland confirm if this new .42 has delivered to service points? Hate to go nagging there if they really don't have it
And more importantly, (and to this I like to hear the answer from Nokia personnel or from users who have been experiencing same problem) will this firmware version fix this problem? Either
a) keeps saving words
or
b) gives a proper error if saving is not possible for reason X
In my case it could not have been "not enough memory/free space"-error, because I have plenty of free space in both, phone and memory card. So if the error comes for some other reason, like to know why.
And no, I won't try to update firmware by my self. I tried it once and my phone died So no trust from me to that service.

I don't believe her claim unless it was true and valid up until the N95. I pass through Wales an awful lot during my work day and therefore I have many many Welsh town and place names entered into my T9 dictionary, along with other words I have added and the few custom smilies I added to it, it has to have way more than 30 words in it.
I'm aware of a bug that resets the T9 dictionary every now and then. The word file gets overwritten every so often and your words disappear. Never did find out what caused it but it affected the 6680. Perhaps this could be the problem.
Useful links: Phone firmware update | Nokia support site

N70 Firmware v5.07xx.x.x.x BUG - memory card corru...

Hi there,
I have N70 and I brought 1GB Kingston MMC card.
Here is the firmware bug...
First, when i bought my Nokia N70 it had firmware version v2.xxx.x.x.x.x ( i do not rimember all numbers ) and the 1GB and 32 MB MMC worked just fine... After updait on v5.0705.3.0.1 ( lastest balkan version ) i have a problems!
When I put the card in my phone it tells me there is no data (of course I put it empty), and when I copy any data from phone memory, the phone tells me that: (Memory card is corrupted). I tried with format but the problem still there ( i tryed to format with phone and card reader!).
This happens often, and sometimes phone doesnt display error (Memory card is corrupted), so i have onother problem! It seem to phone write data on MMC over filled clusters whit other data! For example, I transfer 50 songs, and few songs are writen over onother! I start one song it plays me onother, or phone start to play song i have chosen but in the middle of the song play onother one xD!
This is not only my problem! I have searched on nokia forums but no one didn`t give relevat informations and no one help enyone obout this problem....
When i format and use card reader to transfer data phone is able to read withotut problems, but when i use camera ( and camera store data on MMC ) the MMC is corrupted
I one more thing, i have reinstall and reset my phone milion times! that doesnt help!
Thanks,
lol52

please send me supporting software for corrupted memory card (1GB) to my mail id .
Personal details removed by a moderator. We kindly ask you not to share your personal contact details or your phone's IMEI number publicly on this forum.

X6 Bugs, Bugs Bugs.....@ Firmware 12......

Similar Messages

Maybe you are looking for