XA error: using Weblogic 6.1 and Oracle 8.1.6

Hi,
I am using Weblogic 6.1 with Oracle 8.1.7. I configured a TXDataSource as I wanted
to use Container Managed Transaction through a Session Bean.
Connection Pool Settings: -------------------------
Name - myXAPool URL - jdbc:oracle:thin:@myServer:1521:myDb
DriverClassname - oracle.jdbc.xa.client.OracleXADataSource
TXDataSource Settings : -----------------------
Name - myXADS
JNDIName - myXADS
PoolName - myXAPool
Everything works fine but once in a while I get the following exception:
java.sql.SQLException: XA error: XAER_RMERR : A resource manager error has occured
in the transaction branch start() failed on resource 'myXAPool' Unexpected error
during start for XAResource 'myXAPool': null
The connection pool size is 30 and the number connections high reached was 5,
which means there are enough connections in the pool available at all time.
It would be really great if you can help me out.
Thanks in Advance, Sudhir.

Hi Slava,
Sorry about that Oracle instance I am using is 8.1.7.
For the XA Driver I am using the one that comes with Weblogic in weblogic.jar.
And my Weblogic version 6.1 Sp3.
Thanks,
Sudhir.
"Slava Imeshev" <[email protected]> wrote:
Hi Sudhir,
Are you using an instance of 8.1.6 or 8.1.7? In the message header you
say
8.1.6.
Regards,
Slava Imeshev
"Sudhir Babu" <[email protected]> wrote in message
news:[email protected]..
Hi,
I am using Weblogic 6.1 with Oracle 8.1.7. I configured a TXDataSourceas
I wanted
to use Container Managed Transaction through a Session Bean.
Connection Pool Settings: -------------------------
Name - myXAPool URL - jdbc:oracle:thin:@myServer:1521:myDb
DriverClassname - oracle.jdbc.xa.client.OracleXADataSource
TXDataSource Settings : -----------------------
Name - myXADS
JNDIName - myXADS
PoolName - myXAPool
Everything works fine but once in a while I get the following exception:
java.sql.SQLException: XA error: XAER_RMERR : A resource manager errorhas
occured
in the transaction branch start() failed on resource 'myXAPool' Unexpectederror
during start for XAResource 'myXAPool': null
The connection pool size is 30 and the number connections high reachedwas
5,
which means there are enough connections in the pool available at alltime.
It would be really great if you can help me out.
Thanks in Advance, Sudhir.

Similar Messages

Help!.... XA error: using Weblogic 6.1 and Oracle 8.1.6

 Hi,
 I am using Weblogic 6.1 with Oracle 8.1.7. I configured a TXDataSource as I wanted
 to use Container Managed Transaction through a Session Bean.
 Connection Pool Settings: -------------------------
 Name - myXAPool URL - jdbc:oracle:thin:@myServer:1521:myDb DriverClassname - oracle.jdbc.xa.client.OracleXADataSource
 TXDataSource Settings : -----------------------
 Name - myXADS
 JNDIName - myXADS
 PoolName - myXAPool
 Everything works fine but once in a while I get the following exception:
 java.sql.SQLException: XA error: XAER_RMERR : A resource manager error has occured
 in the transaction branch start() failed on resource 'myXAPool' Unexpected error
 during start for XAResource 'myXAPool': null
 The connection pool size is 30 and the number connections high reached was 5,
 which means there are enough connections in the pool available at all time.
 It would be really great if you can help me out.
 Thanks in Advance, Sudhir.


Hi Slava,
Sorry about that Oracle instance I am using is 8.1.7.
For the XA Driver I am using the one that comes with Weblogic in weblogic.jar.
And my Weblogic version 6.1 Sp3.
Thanks,
Sudhir.
"Slava Imeshev" <[email protected]> wrote:
Hi Sudhir,
Are you using an instance of 8.1.6 or 8.1.7? In the message header you
say
8.1.6.
Regards,
Slava Imeshev
"Sudhir Babu" <[email protected]> wrote in message
news:[email protected]..
Hi,
I am using Weblogic 6.1 with Oracle 8.1.7. I configured a TXDataSourceas
I wanted
to use Container Managed Transaction through a Session Bean.
Connection Pool Settings: -------------------------
Name - myXAPool URL - jdbc:oracle:thin:@myServer:1521:myDb
DriverClassname - oracle.jdbc.xa.client.OracleXADataSource
TXDataSource Settings : -----------------------
Name - myXADS
JNDIName - myXADS
PoolName - myXAPool
Everything works fine but once in a while I get the following exception:
java.sql.SQLException: XA error: XAER_RMERR : A resource manager errorhas
occured
in the transaction branch start() failed on resource 'myXAPool' Unexpectederror
during start for XAResource 'myXAPool': null
The connection pool size is 30 and the number connections high reachedwas
5,
which means there are enough connections in the pool available at alltime.
It would be really great if you can help me out.
Thanks in Advance, Sudhir.

Link error when using WebLogic 6.0 and Oracle 8.1.6

I have installed WebLogic 6.0 on Solaris platform and verified that the
server comes up
and that I can connect to it via Netscape. Next step was to verify
installation of WebLogic
jDriver for Oracle. When I run the following:
java utils.dbping ORACLE scott tiger
I get the following error:
Starting Loading jDriver/Oracle .....
Error encountered:
java.sql.SQLException: System.loadLibrary threw
java.lang.UnsatisfiedLinkError
with the message
'/ldatae/bea/wlserver6.0/lib/solaris/oci816_8/libweblogicoci37.so:
ld.so.1: /ldatae/bea/jdk130/jre/bin/../bin/sparc/native_threads/java:
fatal: libgen.so.1: open failed: No such file or directory'.
at
weblogic.jdbcbase.oci.Driver.loadLibraryIfNeeded(Driver.java:202)
at weblogic.jdbcbase.oci.Driver.connect(Driver.java:57)
at java.sql.DriverManager.getConnection(DriverManager.java:517)
at java.sql.DriverManager.getConnection(DriverManager.java:146)
at utils.dbping.main(dbping.java:182)
Anyone seen this? Help!!!
Thanks in advance
Mike Warren, Sr.
[email protected]
[att1.html]

We do not offer a JDBC driver for Linux in version 5.1. In version 6.0,we
do offer a type 4 driver for Linux.
In version 5.1, I suggest trying the platform independent type 4 JDBC driver
available for free from Oracle. It is supported (as is any JDBC driver)
with WebLogic Server. To download it:
Go to http://www.oracle.com and select the "Download" option.
From the resulting page, use the "Select Utility or Driver" dropdown to
select Oracle JDBC drivers
From the resulting page, scroll down a little (since SQLJ stuff appears at
the top).
Or, to go directly there:
http://technet.oracle.com/software/tech/java/sqlj_jdbc/software_index.htm
Thanks,
Michael
Michael Girdley, BEA Systems Inc
Learning WebLogic? Buy the book.
http://www.learnweblogic.com/
"Michael W. Warren, Sr." <[email protected]> wrote in message
news:[email protected]..
I have installed WebLogic 6.0 on Solaris platform and verified that the
server comes up
and that I can connect to it via Netscape. Next step was to verify
installation of WebLogic
jDriver for Oracle. When I run the following:
java utils.dbping ORACLE scott tiger
I get the following error:
Starting Loading jDriver/Oracle .....
Error encountered:
java.sql.SQLException: System.loadLibrary threw
java.lang.UnsatisfiedLinkError
with the message
'/ldatae/bea/wlserver6.0/lib/solaris/oci816_8/libweblogicoci37.so:
ld.so.1: /ldatae/bea/jdk130/jre/bin/../bin/sparc/native_threads/java:
fatal: libgen.so.1: open failed: No such file or directory'.
at
weblogic.jdbcbase.oci.Driver.loadLibraryIfNeeded(Driver.java:202)
at weblogic.jdbcbase.oci.Driver.connect(Driver.java:57)
at java.sql.DriverManager.getConnection(DriverManager.java:517)
at java.sql.DriverManager.getConnection(DriverManager.java:146)
at utils.dbping.main(dbping.java:182)
Anyone seen this? Help!!!
Thanks in advance
Mike Warren, Sr.
[email protected]

Which database driver is required for weblogic 10.3 and Oracle DB 11g both on MS2008 separate server

Hi,
i am trying to configure JDBC with weblogic. Can any one tell me which deriver needs to be selected for weblogic 10.3 and Oracle DB 11g both on MS2008 separate server.
if i use BEA oracle Driver (Type 4) version 9.0.1, 9.2.0,10,11, i find error (see snap:2)
Connection test failed.
[BEA][Oracle JDBC Driver]Error establishing socket. Unknown host: hdyhtc137540d weblogic.jdbc.base.BaseExceptions.createException(Unknown Source) weblogic.jdbc.base.BaseExceptions.getException(Unknown Source) weblogic.jdbc.oracle.OracleImplConnection.makeConnectionHelper(Unknown Source) weblogic.jdbc.oracle.OracleImplConnection.makeConnection(Unknown Source) weblogic.jdbc.oracle.OracleImplConnection.connectAndAuthenticate(Unknown Source) weblogic.jdbc.oracle.OracleImplConnection.open(Unknown Source) weblogic.jdbc.base.BaseConnection.connect(Unknown Source) weblogic.jdbc.base.BaseConnection.setupImplConnection(Unknown Source) weblogic.jdbc.base.BaseConnection.open(Unknown Source) weblogic.jdbc.base.BaseDriver.connect(Unknown Source) com.bea.console.utils.jdbc.JDBCUtils.testConnection(JDBCUtils.java:505) c om.bea.console.actions.jdbc.datasources.createjdbcdatasource.CreateJDBCDataSource.testConn ectionConfiguration(CreateJDBCDataSource.java:369) sun.reflect.GeneratedMethodAccessor 826.invoke(Unknown Source) sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl. java:25) java.lang.reflect.Method.invoke(Method.java:597) org.apache.beehive.netui .pageflow.FlowController.invokeActionMethod(FlowController.java:870) org.apache.beehiv e.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:809) org.ap ache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:478) or g.apache.beehive.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java :306) org.apache.beehive.netui.pageflow.FlowController.execute(FlowController.java:336 ) ...
and
when i use oracle's driver (thin) version 9.0.1, 9.2.0,10,11, i find error
Connection test failed.
Io exception: The Network Adapter could not establish the connection oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:10 1) oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:112) oracle .jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:173) oracle.jdbc.drive r.DatabaseError.throwSqlException(DatabaseError.java:229) oracle.jdbc.driver.DatabaseE rror.throwSqlException(DatabaseError.java:458) oracle.jdbc.driver.T4CConnection.logon( T4CConnection.java:411) oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnectio n.java:490) oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:202) oracle .jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:33) oracle.jdbc. driver.OracleDriver.connect(OracleDriver.java:474) com.bea.console.utils.jdbc.JDBCUtil s.testConnection(JDBCUtils.java:505) com.bea.console.actions.jdbc.datasources.createjd bcdatasource.CreateJDBCDataSource.testConnectionConfiguration(CreateJDBCDataSource.java:36 9) sun.reflect.GeneratedMethodAccessor826.invoke(Unknown Source) sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl. java:25) java.lang.reflect.Method.invoke(Method.java:597) org.apache.beehive.netui .pageflow.FlowController.invokeActionMethod(FlowController.java:870) org.apache.beehiv e.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:809) org.ap ache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:478) or g.apache.beehive.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java :306) org.apache.beehive.netui.pageflow.FlowController.execute(FlowController.java:336 ) ...

i am finding this error when i click on Test Configuration button to test the connection wth oracle DB

Problem in using Weblogic 6.1 with Oracle 9i

Hi,
Has anybody experiensing problems in creating connection from Weblogic6.1 to Oracle
9i using thin driver?
We have a piece of codes that works fine with Weblogic 6.1 and Oracle 8.1.7 but
failed to create database connection when we upgrade to database to 9i (the same
code works fine without weblogic).
Thanks
Li
[email protected]

It works after I put the new oracle driver ahead of the weblogic stuff.
Thanks
Li
Joseph Weinstein <[email protected]> wrote:
You should make sure you have the same Oracle driver in the server
classpath, as works in the standalone case. Note that we ship a
thin driver too, so your newer one will ahve to be ahead of all
the weblogic stuff in the server classpath.
Joe
Li Wang wrote:
After upgraded our oracle server to 9i, we found that our applicationdoes not
work. So, I wrote a simple test program that just creates a connectionand exec
a query. The program works find with 9i by itself (of cause). But,when I put
it in Weblogic 6.1 (as Startup class), there are problems.
First, it takes 833700ms to create a connection (It takes 981ms tocreate a connection
outside wls, it takes 900ms to create a connection to oracle8.1.7 insidewls).
Then, it gets "java.sql.SQLException: ORA-00600: internal error code,arguments:
[ttcgcshnd-1], [0], [], [], [], [], [], []"
while executing the query.
We run weblogic and oracle on Windows2000.
The code looks like:
Class.forName("oracle.jdbc.driver.OracleDriver");
String username = "yourusername";
String password = "yourpassword";
String host = "yourhost";
String sid = "yoursid";
String dbURL = "jdbc:oracle:thin:@" + host +":1521:" + sid;
String sql = "select * from yourtable";
System.out.println(dbURL);
Connection connection = DriverManager.getConnection (dbURL, username,password);
Statement statement = connection.createStatement();
statement.executeQuery(sql);
statement.close();
connection.close();
"Jignesh Patel" <[email protected]> wrote:
1. Are you able to create connection pool using Oracle 9i THIN driver
? i.e Define
connection pool & make initial connection => 1. At the time of startup
weblogic
will create connections defined in connection pool.
2. Can you post your error message ?
Thanks
Jignesh Patel
"Li Wang" <[email protected]> wrote:
Hi,
Has anybody experiensing problems in creating connection from Weblogic6.1
to Oracle
9i using thin driver?
We have a piece of codes that works fine with Weblogic 6.1 and Oracle
8.1.7 but
failed to create database connection when we upgrade to database
to
9i
(the same
code works fine without weblogic).
Thanks
Li
[email protected]

Help building an e-commerce site using DreamWeaver MX 2004 and Oracle 10G

I'm new to using Oracle 10G. After reviewing several rdms's I've picked Oracle 10G as my rdms. I'm trying to build an ecommerce site using DreamWeaver MX 2004 and Oracle 10G. The website will be selling hardware and software products. I have a choice in DreamWeaver to go for a .asp or .jsp setup. I have several questions, here goes:
1. Is there any book/tutorial/whitepaper out there that describes building an ecommerce site using Oracle 10G/9I/8I? Just some examples as how to make the datamodel regarding the shopping basket etc.
2. I prefer DreamWeaver as it let's me make nice looking css style based pages without throttling too much through the code. Are there Oracle tools which allow me to make an advanced nice looking ecommerce site?
I hope some of you can help me get started. Any effort is appreciated.
Cheers

I'm new to using Oracle 10G. After reviewing several rdms's I've picked Oracle 10G as my rdms. I'm trying to build an ecommerce site using DreamWeaver MX 2004 and Oracle 10G. The website will be selling hardware and software products. I have a choice in DreamWeaver to go for a .asp or .jsp setup. I have several questions, here goes:
1. Is there any book/tutorial/whitepaper out there that describes building an ecommerce site using Oracle 10G/9I/8I? Just some examples as how to make the datamodel regarding the shopping basket etc.
2. I prefer DreamWeaver as it let's me make nice looking css style based pages without throttling too much through the code. Are there Oracle tools which allow me to make an advanced nice looking ecommerce site?
I hope some of you can help me get started. Any effort is appreciated.
Cheers

Can't create connection pool using weblogic 6.1 with Oracle thin driver

Hi !
I have tried to create a connection pool from adminconsole. My CLASSPATH setting
is as follows :
F:\SOAP\soap-2_2\lib;F:\SOAP\soap-2_2;
D:\Oracle\Ora81\jdbc\lib\classes12.zip;
D:\Oracle\Ora81\jdbc\lib\nls_charset12.zip;
D:\Oracle\Ora81\jdbc\lib\classes111.zip;
F:\SOAP\soap-2_2\lib\jaf-1.0.1\activation.jar;
D:\Oracle\Ora8\Apache\Jsdk\src\javax\servlet\http;
D:\Oracle\Ora81\Apache\Jsdk\src\javax\servlet;
D:\Oracle\Ora81\lib;
F:\ant\jakarta-ant1.\bin;
E:\weblogic\oci\classes;
E:\weblogic\oci\classes\weblogic\xml\license;
E:\weblogic\oci\license;
E:\bea\wlserver6.1\lib;
E:\PetStoreHome\petstore1.3;
Following is the configuration.
#Oracle thin driver Method #2
weblogic.jdbc.connectionPool.thin=\
url=jdbc:oracle:thin:@test:1521:PROJECT,\
driver=oracle.jdbc.driver.OracleDriver,\
 initialCapacity=4,\
 maxCapacity=10,\
 capacityIncrement=1,\
 props=user=xxx;password=xxx;server=test
#Add a TXDataSource for the connection pool:
weblogic.jdbc.TXDataSource.weblogic.jdbc.jts.thin=thin
# Add an ACL for the connection pool:
weblogic.allow.reserve.weblogic.jdbc.connectionPool.thin=everyone
I did append the file weblogic.properties with the above config. Now when I start
the Weblogic server I get the following error :
Starting WebLogic Server ....
<Nov 29, 2001 2:24:16 PM EST> <Notice> <Management> <Loading configuration file
.\config\petstore\config.xml ...>
<Nov 29, 2001 2:24:22 PM EST> <Notice> <WebLogicServer> <Starting WebLogic Admin
Server "petstoreServer" for domain "petstore">
<Nov 29, 2001 2:24:26 PM EST> <Notice> <Management> <Starting discovery of Manag
ed Server... This feature is on by default, you may turn this off by passing -Dw
eblogic.management.discover=false>
<Nov 29, 2001 2:24:35 PM EST> <Error> <JDBC> <Error during Data Source creation:
weblogic.common.ResourceException: DataSource(jdbcthin.SignOnDB) can't be creat
ed with non-existent Pool (connection or multi) (thin)>
<Nov 29, 2001 2:24:35 PM EST> <Error> <JDBC> <Error during Data Source creation:
weblogic.common.ResourceException: DataSource(jdbcthin.EstoreDB) can't be creat
ed with non-existent Pool (connection or multi) (thin)>
<Nov 29, 2001 2:24:35 PM EST> <Error> <JDBC> <Error during Data Source creation:
weblogic.common.ResourceException: DataSource(jdbcthin.InventoryDB) can't be
cr
eated with non-existent Pool (connection or multi) (thin)>
<Nov 29, 2001 2:24:35 PM EST> <Error> <JDBC> <Error during Data Source creation:
weblogic.common.ResourceException: DataSource(weblogic.jdbc.jts.thin) can't be
created with non-existent Pool (connection or multi) (thin)>
<Nov 29, 2001 2:24:41 PM EST> <Notice> <Management> <Application Poller not star
ted for production server.>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
After the server has booted, your browser should
automatically launch and point to the WebLogic Server
Tour running on this server. If your browser fails to
launch, point your browser to the URL
"http://burtsun:7001"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
<Nov 29, 2001 2:24:41 PM EST> <Notice> <WebLogicServer> <ListenThread listening
on port 7001>
<Nov 29, 2001 2:24:41 PM EST> <Notice> <WebLogicServer> <SSLListenThread listeni
ng on port 7002>
<Nov 29, 2001 2:24:42 PM EST> <Notice> <WebLogicServer> <Started WebLogic Admin
Server "petstoreServer" for domain "petstore" running in Production Mode>
Could anyone please help me ?
Thanks
..Madhuri

Madhuri wrote:
>
Hi Joe !
I didn't get what you would like to point out. Actully, I am using same config.,
but not to disclose the info. I gave you @test and username/password xxx/xxx.Ok. Now, assuming your pool looks like what I showed, the issue is probably
that there are multiple Oracle driver zips around, and your standlaone program
is using a different, newer, better one than the server. Our weblogic jar files
include a classes12.zip Oracle thin driver, but there are multiple versions of
classes12.zip, and the latest from oracle is better than the one we sealed into
our packaging. Please use jave -verbose to identify exactly which Oracle sip file
you are using in the successful case, then make sure this zip file comes before
any weblogic stuff in your weblogic server's classpath, so we'll use the same
driver. This should work. Edit the script you sue to start weblogic to verify
the classpath does end up with the oracle driver ahead of all weblogic stuff.
Joe
>
Please let me know.
Thanks
.Madhuri
Joseph Weinstein <[email protected]> wrote:
Madhuri wrote:
Hi Joe !
Here is the sample java code. Please let me know how I can test thisin weblogic
6.1.
Thanks
.MadhuriWell fine! That was easy. Your pool definition didn't have the same URL
or
user or password as this code. Try this for your pool definition:
weblogic.jdbc.connectionPool.thin=\
url=jdbc:oracle:thin:@adl-gbsdevel:1521:PROJECT,\
driver=oracle.jdbc.driver.OracleDriver,\
initialCapacity=10,\
maxCapacity=10,\
capacityIncrement=1,\
testConnsOnReserve=true,\
testTable=dual,\
props=user=mkelkar;password=mkelkar
Let me know,,,
Joe
Joseph Weinstein <[email protected]> wrote:
The key is in the log:
Could not create pool connection.
The DBMS driver exception was:
java.sql.SQLException: invalid arguments in call
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:168)
Now we need to simplify the problem. Please make a simple 15-line
standalone
Java program like you'd find with the Oracle driver's examples, with
no
weblogic code in the picture. Just make a JDBC connection using Oracle's
driver, and show me that code. Then I can translate that into a pool
definition.
Joe
Madhuri wrote:
Hi Joe !
Thanks for your prompt reply. I tried the way you suggested but
it
still it gives
me the same error. I am attching here the weblogic.log file.
Thanks again
..Madhuri
Joseph Weinstein <[email protected]> wrote:
We'd want to see the log during booting, where the pool
is being created to see why that failed. Try a pool
definition with no blank lines, no whitespace at the
end of lines, and no server property. The thin driver
doesn't like that:
weblogic.jdbc.connectionPool.thin=\
url=jdbc:oracle:thin:@test:1521:PROJECT,\
driver=oracle.jdbc.driver.OracleDriver,\
initialCapacity=4,\
maxCapacity=10,\
capacityIncrement=1,\
props=user=xxx;password=xxx
Joe
Madhuri wrote:
Hi !
I have tried to create a connection pool from adminconsole. My
CLASSPATH
setting
is as follows :
F:\SOAP\soap-2_2\lib;F:\SOAP\soap-2_2;
D:\Oracle\Ora81\jdbc\lib\classes12.zip;
D:\Oracle\Ora81\jdbc\lib\nls_charset12.zip;
D:\Oracle\Ora81\jdbc\lib\classes111.zip;
F:\SOAP\soap-2_2\lib\jaf-1.0.1\activation.jar;
D:\Oracle\Ora8\Apache\Jsdk\src\javax\servlet\http;
D:\Oracle\Ora81\Apache\Jsdk\src\javax\servlet;
D:\Oracle\Ora81\lib;
F:\ant\jakarta-ant1.\bin;
E:\weblogic\oci\classes;
E:\weblogic\oci\classes\weblogic\xml\license;
E:\weblogic\oci\license;
E:\bea\wlserver6.1\lib;
E:\PetStoreHome\petstore1.3;
Following is the configuration.
#Oracle thin driver Method #2
weblogic.jdbc.connectionPool.thin=\
url=jdbc:oracle:thin:@test:1521:PROJECT,\
driver=oracle.jdbc.driver.OracleDriver,\
initialCapacity=4,\
maxCapacity=10,\
capacityIncrement=1,\
props=user=xxx;password=xxx;server=test
#Add a TXDataSource for the connection pool:
weblogic.jdbc.TXDataSource.weblogic.jdbc.jts.thin=thin
# Add an ACL for the connection pool:
weblogic.allow.reserve.weblogic.jdbc.connectionPool.thin=everyone
I did append the file weblogic.properties with the above config.
Now
when I start
the Weblogic server I get the following error :
Starting WebLogic Server ....
<Nov 29, 2001 2:24:16 PM EST> <Notice> <Management> <Loading
configuration
file
\config\petstore\config.xml ...>
<Nov 29, 2001 2:24:22 PM EST> <Notice> <WebLogicServer> <Starting
WebLogic
Admin
Server "petstoreServer" for domain "petstore">
<Nov 29, 2001 2:24:26 PM EST> <Notice> <Management> <Starting
discovery
of Manag
ed Server... This feature is on by default, you may turn this
off
by
passing -Dw
eblogic.management.discover=false>
<Nov 29, 2001 2:24:35 PM EST> <Error> <JDBC> <Error during Data
Source
creation:
weblogic.common.ResourceException: DataSource(jdbcthin.SignOnDB)
can't
be creat
ed with non-existent Pool (connection or multi) (thin)>
<Nov 29, 2001 2:24:35 PM EST> <Error> <JDBC> <Error during Data
Source
creation:
weblogic.common.ResourceException: DataSource(jdbcthin.EstoreDB)
can't
be creat
ed with non-existent Pool (connection or multi) (thin)>
<Nov 29, 2001 2:24:35 PM EST> <Error> <JDBC> <Error during Data
Source
creation:
weblogic.common.ResourceException: DataSource(jdbcthin.InventoryDB)can't be
cr
eated with non-existent Pool (connection or multi) (thin)>
<Nov 29, 2001 2:24:35 PM EST> <Error> <JDBC> <Error during Data
Source
creation:
weblogic.common.ResourceException: DataSource(weblogic.jdbc.jts.thin)can't be
created with non-existent Pool (connection or multi) (thin)>
<Nov 29, 2001 2:24:41 PM EST> <Notice> <Management> <Application
Poller
not star
ted for production server.>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
After the server has booted, your browser should
automatically launch and point to the WebLogic Server
Tour running on this server. If your browser fails to
launch, point your browser to the URL
"http://burtsun:7001"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
<Nov 29, 2001 2:24:41 PM EST> <Notice> <WebLogicServer> <ListenThreadlistening
on port 7001>
<Nov 29, 2001 2:24:41 PM EST> <Notice> <WebLogicServer> <SSLListenThreadlisteni
ng on port 7002>
<Nov 29, 2001 2:24:42 PM EST> <Notice> <WebLogicServer> <Started
WebLogic
Admin
Server "petstoreServer" for domain "petstore" running in ProductionMode>
Could anyone please help me ?
Thanks
..Madhuri
Name: weblogic.log
weblogic.log Type: Text Document (application/x-unknown-content-type-txtfile)
Encoding: base64
Name: PrintColumns.java
PrintColumns.java Type: Visual Cafe File (application/x-unknown-content-type-VisualCafeFile.Document)
Encoding: base64

CachedRowSet problem in Weblogic 6.1 and Oracle thin driver 9.0.1

Has anyone used the CachedRowSet class successfully? (this classes are
new and from the JDBC extension pack)
I am experiencing "Not in a transaction" errors when executing
cachedrowset.populate(resultset), even though I'm inside a correct
ut.begin and ut.commit transaction.
Note I don't have these problems when I don't use the CachedRowSet
classes.
If I remove the setFetchSize(50) line, then I receive the ORA-01002:
fetch out of sequence error, which is discussed in another post on
this newsgroup.
I don't have any of these problems at all, if I use the Oracle Thin
Driver directly (i.e. not using Weblogic 6.1).
-H
Example of code:
stmt = getConnection().createStatement();
stmt.setFetchSize(50);
stmt.executeQuery("SELECT * FROM ASSET");
rs = stmt.getResultSet();
crs = new CachedRowSet();
crs.populate(rs);

Hi Arturo,
What kind of a problem do you have? Any stacktraces?
Regards,
Slava Imeshev
"Arturo Fernandez" <[email protected]> wrote in message
news:[email protected]..
Hi! I have a problem with CLOB column in Oracle 8.1.7. My enviroment
is:
Windows 2000, BEA WLS 6.1 and Oracle 8.1.7. I'm trying to use
'classes12.zip' provided by Oracle. I added 'classes12.zip' to
CLASSPATH after than 'weblogic.jar' in my startup server script, but
it fails when trying to retrieve a CLOB data from database. Script
includes:
setCLASSPATH=.\classes12_01.zip;.;.\lib\weblogic_sp.jar;.\lib\weblogic.jar;
>
But this driver and the code runs sucessfully with the same database
and weblogic 5.1. I'm interesting in use this driver and this code
because i'm trying to migrate two applications from WLS 5.1 to WLS 6.1
I cannot find a solution.
Can everybody help me, please? It's urgent for me...

Out of memory using Windows Server 2003 and Oracle 9.2.0.3

Hi,
I just installed both Windows Server 2003 and Oracle 9.2.0.3. The server I am using has 4 gigabytes of memory installed, and windows shows that to be the actual physical memory on the server. The paging file is 8 gigabytes for a total of 12 gigabytes of virtual memory.
Using the Oracle Database Configuration Assistant, I create a new database using default values. After verifying the installation worked OK (database started, queries ran), I attempted to change some of the memory parameters and was able to start the database using about 1.4 gigabytes of total SGA, with the O/S using about .3 gigabytes for a total of 1.7 gigabytes. I then attempted to change the buffer cache + 1 gigabyte for a total of 2 gigabytes. Now the database will not start and I get an out of memory error ora-27102 with an additional O/S memory error of "O/S Error: (OS 8) Not enough storage is available to process this command".
So, I have two problems:
1) With 4 gigabytes installed, and the O/S using only about 300 megabytes, why isn't Oracle able to take advantage of the memory on this machine past the 1.7 gigabytes (as reported by Windows task manager).
2) How do I change the spfile memory parameters so the database will start using spfile? I can start the database pointing to a pfile with lesser memory parameters, but I don't know how to effect change on the spfile, since I cannot start with the spfile.
Both these technologies (9.2.0.3 and Server 2003) are new to me, so any insight would be appreciated!
HERE ARE THE SPFILE PARAMETERS THAT WORKED:
SGA (M)
Shared Pool=104
Buffer Cache=960 ***
Large Pool=0
Java Pool=64
Total SGA=1128
SGA Max Size=1321
Aggregate PGA Target=1500
Current PGA Allocated=22868KB
WINDOWS MEMORY INFO FROM TASK MANAGER SHOW:
PF Usage=1.66GB
Physical Memory (K)
Total=4062704
Available=3203460
System Cache=2499096
Commit Charge (K)
Total=1748184
Limit=12288628
Peak=1925276
*** When I change this to 2048 the database did not start.
Thank you.

CREATE SPFILE
Purpose
Use the CREATE SPFILE statement to create a server parameter file from a client-side initialization parameter file. Server parameter files are binary files that exist only on the server and are called from client locations to start up the database.
Server parameter files let you make persistent changes to individual parameters. When you use a server parameter file, you can specify in an ALTER SYSTEM SET parameter statement that the new parameter value should be persistent. This means that the new value applies not only in the current instance, but also to any instances that are started up subsequently. Traditional client-side parameter files do not let you make persistent changes to parameter values. Because they are located on the server, these files allow for automatic database tuning by Oracle and for backup by Recovery Manager (RMAN).
To use a server parameter file when starting up the database, you must create it from a traditional text initialization parameter file using the CREATE SPFILE statement.
All instances in an Real Application Clusters environment must use the same server parameter file. However, when otherwise permitted, individual instances can have different settings of the same parameter within this one file. Instance-specific parameter definitions are specified as SID.parameter = value, where SID is the instance identifier.
The method of starting up the database with a server parameter file depends on whether you create a default or nondefault server parameter file. Please refer to "Creating a Server Parameter File: Examples" for examples of how to use server parameter files.
See Also:
CREATE PFILE for information on creating a regular text parameter file from a binary server parameter file
Oracle9i Database Administrator's Guide for information on pre-Oracle9i initialization parameter files and Oracle9i server parameter files
Oracle9i Real Application Clusters Administration for information on using server parameter files in a Real Application Clusters environment
Prerequisites
You must have the SYSDBA or the SYSOPER system privilege to execute this statement. You can execute this statement before or after instance startup. However, if you have already started an instance using spfile_name, you cannot specify the same spfile_name in this statement.
Syntax
create_spfile::=
Text description of create_spfile
Semantics
spfile_name
This clause lets you specify a name for the server parameter file you are creating.
If you do not specify spfile_name, Oracle uses the platform-specific default server parameter filename. If spfile_name already exists on the server, this statement will overwrite it. When using a default server parameter file, you start up the database without referring to the file by name.
If you do specify spfile_name, you are creating a nondefault server parameter file. In this case, to start up the database, you must first create a single-line traditional parameter file that points to the server parameter file, and then name the single-line file in your STARTUP command.
See Also:
"Creating a Server Parameter File: Examples" for information on starting up the database with default and nondefault server parameter files
Oracle9i Database Administrator's Guide for Windows (or other appropriate operating system specific documentation) for default parameter file names
pfile_name
Specify the traditional initialization parameter file from which you want to create a server parameter file.
If you specify pfile_name, the parameter file must reside on the server. If it does not reside in the default directory for parameter files on your operating system, you must specify the full path.
If you do not specify pfile_name, Oracle looks in the default directory for parameter files on your operating system for the default parameter filename, and uses that file. If that file does not exist in the expected directory, Oracle returns an error.
Note:
In a Real Application Clusters environment, you must first combine all instance parameter files into one file before specifying it in this statement to create a server parameter file. For information on accomplishing this step, see Oracle9i Real Application Clusters Setup and Configuration.
Examples
Creating a Server Parameter File: Examples
The following example creates a default server parameter file from a client initialization parameter file named t_init1.ora:
CREATE SPFILE
FROM PFILE = '$ORACLE_HOME/work/t_init1.ora';
Note:
Typically you will need to specify the full path and filename for parameter files on your operating system. Please refer to your Oracle operating system documentation for path information.
When you create a default server parameter file, you subsequently start up the database using that server parameter file by using the SQL*Plus command STARTUP without the PFILE parameter, as follows:
STARTUP
The following example creates a nondefault server parameter file s_params.ora from a client initialization file named t_init1.ora:
CREATE SPFILE = 's_params.ora'
FROM PFILE = '$ORACLE_HOME/work/t_init1.ora';
When you create a nondefault server parameter file, you subsequently start up the database by first creating a traditional parameter file containing the following single line:
spfile = 's_params.ora'
The name of this parameter file must comply with the naming conventions of your operating system. You then use the single-line parameter file in the STARTUP command. The following example shows how to start up the database, assuming that the single-line parameter file is named new_param.ora:
STARTUP PFILE=new_param.ora
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96540/statements_616a.htm#SQLRF01315
Joel P�rez

Problem pool weblogic 6.1 and oracle thin driver 8.1.7

Hi! I have a problem with CLOB column in Oracle 8.1.7. My enviroment
is:
Windows 2000, BEA WLS 6.1 and Oracle 8.1.7. I'm trying to use
'classes12.zip' provided by Oracle. I added 'classes12.zip' to
CLASSPATH after than 'weblogic.jar' in my startup server script, but
it fails when trying to retrieve a CLOB data from database. Script
includes:
set CLASSPATH=.\classes12_01.zip;.;.\lib\weblogic_sp.jar;.\lib\weblogic.jar;
But this driver and the code runs sucessfully with the same database
and weblogic 5.1. I'm interesting in use this driver and this code
because i'm trying to migrate two applications from WLS 5.1 to WLS 6.1
I cannot find a solution.
Can everybody help me, please? It's urgent for me...

Hi Arturo,
What kind of a problem do you have? Any stacktraces?
Regards,
Slava Imeshev
"Arturo Fernandez" <[email protected]> wrote in message
news:[email protected]..
Hi! I have a problem with CLOB column in Oracle 8.1.7. My enviroment
is:
Windows 2000, BEA WLS 6.1 and Oracle 8.1.7. I'm trying to use
'classes12.zip' provided by Oracle. I added 'classes12.zip' to
CLASSPATH after than 'weblogic.jar' in my startup server script, but
it fails when trying to retrieve a CLOB data from database. Script
includes:
setCLASSPATH=.\classes12_01.zip;.;.\lib\weblogic_sp.jar;.\lib\weblogic.jar;
>
But this driver and the code runs sucessfully with the same database
and weblogic 5.1. I'm interesting in use this driver and this code
because i'm trying to migrate two applications from WLS 5.1 to WLS 6.1
I cannot find a solution.
Can everybody help me, please? It's urgent for me...

Receiving ERRORS using WEBLOGIC.DEPLOY

Hi everybody,
I am getting strange errors when using the weblogic.deploy command-line
function. I am using WL6.0 on W2000.
Deploy/Update
command: java weblogic.deploy -port 7001 -host localhost update
beapasword MyWebApplication stage\MyWebApplication.war
error: java.lang.NullPointerException
at
weblogic.deploy.deployApplication(deploy.java:383)
at weblogic.deploy.deploy(deploy.java:340)
at weblogic.deploy.runBody(deploy.java:219)
at weblogic.utils.compiler.Tool.run(Tool.java:81)
at weblogic.deploy.main(deploy.java:954)
Undeploy
Command: java weblogic.deploy -port 7001 -host localhost undeploy
beapasword MyWebApplication
error: giving up after two minutes
And it looks that just a Update doens't work. I have to undeploy first and
the do a update to see the changes I've made in my file.
Any suggestions....
M-

Hi.
WLS version and service pack level? Please post the entire weblogic.deploy command along
with the exception that follows.
Thanks,
Michael
Harjeet Singh wrote:
I try to use weblogic.deploy to deploy my EAR file on weblogic server called localhost
on 7001. When I try to run it gives me following error:
[java] JNDI naming exception: Naming exception trying to connect to: t3://localhost:7001
as: system: password
system password is correct. I have tried http://localhost:7001 to but doesen't seem
to work.
Any ideas.
HS--
Michael Young
Developer Relations Engineer
BEA Support

Error Using weblogic.jspc --- java.lang.ExceptionInInitializerError

Hi,
 I am trying to use the weblogic.jspc compiler to pre-compile my jsp
 files so that I can verify that they compile w/o having to visit the
 page. I am using Weblogic 4.5.1. I am encountering the following
 error:
 java.lang.ExceptionInInitializerError
 at java.lang.Throwable.<init>(Compiled Code)
 at java.lang.Error.<init>(Compiled Code)
 at java.lang.LinkageError.<init>(Compiled Code)
 at java.lang.ExceptionInInitializerError.<init>(Compiled Code)
 at java.beans.Beans.instantiate(Compiled Code)
 at weblogic.servlet.jsp.JspLexer.processBeanTag(Compiled Code)
 at weblogic.servlet.jsp.JspLexer.mXML_OPEN_USEBEAN(Compiled Code)
 at weblogic.servlet.jsp.JspLexer.mXML_THING(Compiled Code)
 at weblogic.servlet.jsp.JspLexer.mTOKEN(Compiled Code)
 at weblogic.servlet.jsp.JspLexer.nextToken(Compiled Code)
 at weblogic.servlet.jsp.JspLexer.parse(Compiled Code)
 at weblogic.servlet.jsp.JspParser.doit(Compiled Code)
 at weblogic.servlet.jsp.JspParser.parse(Compiled Code)
 at weblogic.servlet.jhtmlc.Jhtml2Java$Output.setSourceFile(Compiled
 Code)
 at weblogic.servlet.jhtmlc.Jhtml2Java.outputs(Compiled Code)
 at weblogic.utils.compiler.CodeGenerator.generate(Compiled Code)
 at weblogic.jhtmlc.runBody(Compiled Code)
 at weblogic.jspc.runBody(Compiled Code)
 at weblogic.utils.compiler.Tool.run(Compiled Code)
 at weblogic.jspc.main(Compiled Code)
 Have any of you seen this? Can you tell me what I am doing wrong
 (Classpath, etc.)?
 Any and all help would be greatly appreciated.
 The command line I am using is:
 java -verbose -classpath
 $CLASSPATH:/apps/weblogic/license:/apps/weblogic/classes:/apps/weblogic/lib/weblogicaux.jar
 weblogic.jspc -d $HOME/weblogic/myserver/classfiles/examples
 100-Welcome.jsp
 Regards,
 Richard


Fixed with a patch CR0737797 and CR062538 for the 6.1 sp3 source line
 Prasanna Yalam

Errors using weblogic sql driver: "No JDBC connection can be made because the transaction state is marked rollback"

One of our customers starts to encounter this error message recently.
We checked our log files. It seems that the error happens when
to obtain a jdbc connection. Have anyone seen similar problems
and knows how to fix it? thanks in advance.
We are using weblogic server 6.1sp2, and weblogic sql type 4 driver.
The functions that invoke the jdbc calls are stateless session bean
methods with their transaction attributes marked as Required.
There is no nested calls of these methods.
A partial stack trace we obtained is as following:
java.sql.SQLException: No JDBC connection can be made
because the transaction state is
Marked Rollback
 at weblogic.jdbc.jts.Connection.getOrCreateConnection(Connection.java:586)
 at weblogic.jdbc.jts.Connection.prepareStatement(Connection.java:115)
 at weblogic.jdbc.rmi.internal.ConnectionImpl.prepareStatement(ConnectionImpl.java:135)
 at weblogic.jdbc.rmi.SerialConnection.prepareStatement(SerialConnection.java:76)
lixin

Joseph Weinstein <[email protected]> wrote:
>
>
YuanHui Liu wrote:
Joe,
We got the exact same error message. The error came after we got theJDBC connection,
and trying to create statement off it.
It occurs intermitently when we are running another standalone JAVAapp to do
some end of day work, which results in the DB Server being very busy(90+%CPU
usage) for about 5 minutes. We see a surge of requests to the WLSJDBC Connection
pool. This would sometimes result in all our subsequent DB requeststo fail and
lead to a crash.
We are using WLS6.0SP1. I do not think there's a 30 seconds wait leadingto a
connection timeout that caused this(rather it is the end effect).
Can you give us a more detailed explanation? Is there a miscommunicationbetween
our DB(Sybase12) and WLS?Hi. It looks to you like it's after you get the connection, but really
it's when the server is
gettng the pool connection. For performance/synchronization reasons we
do a clever
delay: When your code asks for a pool connection we quickly give you
the pool wrapper,
but we delay actually reserving the real underlying DBMS connection until
your first
real need for a connection, at your first JDBC call, such as createStatement()
etc.
It is while waiting for a pool connection long enough for the transaction
coordinator
to have timed you out before you ever get a chance. It's nothing to do
with the
DBMS or even JDBC, I believe. I think the weblogic server either has
too few execute-threads
and/or too few CPU cycles to do the work load.
Okay, so there's a lazy initialization of the connection.
From reading our log I believe our failur is immediate rather
than waiting for 30+ seconds(the default setting) from the DB,
the timeout occurred later as a result. At the time either because the DB Server
is very busy.
Since we are running WLS6.0 we have only one connection pool,
we have defined a max of 150 threads in the pool. While this
is happening the DB Server is being pinned by an overnight job,
but the WLS Server is not busy at all. The DB and WLS resides
on different physical boxes.
We also have a thread dump from the WLS console when we rebooted the server, it
showed that we are hanging on to the thread & jdbc
connections after these exceptions has occurred instead of releasing them, note
"16083"(~4.5 hours) seconds has passed:
142 116222 Retry rollback request for tx: 'transaction=(IdHash=2963855,Name =
[EJB UserManagerBeanImpl.signalICUserServletHeartBeat()],Xid=30643:8f3838f3709bf53d,Status=Rolling
Back. [Reason = Unknown],numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since
begin=16083,seconds left=10,ServerResourceInfo[weblogic.jdbc.jts.Connection]=(state=started,assigned=server),SCInfo[server]=(state=active),properties=({weblogic.jdbc=t3://159.55.158.25:8005,
weblogic.transaction.name=[EJB UserManagerBeanImpl.signalICUserServletHeartBeat()]}))'
Scheduled Trigger
So I would argue this problem actually chewed up resources on the WLS server.
-Yuanhui Liu
>>
>>
Thanks.
-YuanHui Liu
Joseph Weinstein <[email protected]> wrote:
lixin wrote:
One of our customers starts to encounter this error message recently.
We checked our log files. It seems that the error happens when
to obtain a jdbc connection. Have anyone seen similar problems
and knows how to fix it? thanks in advance.
We are using weblogic server 6.1sp2, and weblogic sql type 4 driver.
The functions that invoke the jdbc calls are stateless session bean
methods with their transaction attributes marked as Required.
There is no nested calls of these methods.
A partial stack trace we obtained is as following:
java.sql.SQLException: No JDBC connection can be made
because the transaction state is
Marked Rollback
at weblogic.jdbc.jts.Connection.getOrCreateConnection(Connection.java:586)Hi. This sounds like a JVM thread starvation issue, and/or a server
load
issue. What is
happening is that the transaction is started, and times out beforethe
SSB even gets to
the first JDBC work. I would first verify that the customer is using
the very latest JVM
available for the machine.
Joe Weinstein
at weblogic.jdbc.jts.Connection.prepareStatement(Connection.java:115)
at weblogic.jdbc.rmi.internal.ConnectionImpl.prepareStatement(ConnectionImpl.java:135)
at weblogic.jdbc.rmi.SerialConnection.prepareStatement(SerialConnection.java:76)
lixin

SSO using WebLogic app server and AD as the auth source

Hi All,
I am trying to setup SSO on 10gR3 using MS Active Directory as the auth source and WebLogic as the app server.
Do I have to create a custom SSO or can this setup be configured using the basic SSO and config changes?
Any help or guidance will be appreciated.
Cheers
Bob

There are many ways. The generic answer is federation via SAML, look at the docs for Oracle Identity Federation.

Using J2EE EJB Container and Oracle 8.1.7

I am trying to setup the J2EE EJB container to use and Oracle 8.1.7 database instead of Cloudscape. So far I have done the following
0. Created the table for the Savings Account tutorial in the Oracle Database.
1. Added the Classes12.jar (Oracle's latest JDBC thin drivers) to my CLASSPATH
2. Under "Server Configuration" I added the standard/jdbc drivers value: "oracle.jdbc.driver.OracleDriver".
3. Under "Server Configuration" I added the standard/datasource value: JNDI name "jdbc/Oracle" and JDBC URL "jdbc:oracle:thin:@10.1.1.254:1521:DEV".
4. For the savings account tutorial, when deploying I specified "jdbc/Oracle" for the reference "jdbc/SavingsAccountDB".
I have gotten this tutorial to work using the Cloudscape database. After I did the previous steps and tried to run the client, I get no valid driver available, unable to connect to Oracle.
What else to I need to do?
My setup is:
Windows 2000 Professional
J2EE (JDK 1.3.1)
Oracle 8.1.7
Thank you in advance.

Exactly which classpath did you add the Oracle JDBC library jar to ?
The thing that works for me is to have the following line in the file %J2EE_HOME%\bin\userconfig.bat
set J2EE_CLASSPATH=D:\DownLoad\Oracle\classes12_01.zip;

XA error: using Weblogic 6.1 and Oracle 8.1.6

Similar Messages

Maybe you are looking for