Xbox 360 to wrt110

So i can connect my computer to my wrt110 wirelessly no problemo. When I try to connect my xbox 360, however, i can only connect to the router and not the internet. any help?

Do the following :
Open an Internet Explorer browser page.In the address bar type - 192.168.1.1
Leave username blank & in password use admin in lower case...
Click on "Applications and Gaming" tab and then click on "Port Range Forwarding" subtab...
1) On the first line in Application box type in ABC, in the start box type in 88 and End box type in 88, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...
2) On the second line in Application box type in PQR, in the start box type in 3074 and End box type in 3074, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...
3) On the third line in Application box type in XYZ, in the start box type in 53 and End box type in 53, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box and click on Save Settings...
3) Once you return to the set up page click on the Security tab and uncheck Block Anonymous Internet Requests and click on Save Settings...
4) Click on set-up and change the MTU Size to 1452 and click Save Settings...
5) Goto the XBox Network Settings and IP Address Settings and select manual IP Settings and assign the following on your Xbox
IP Address :- 192.168.1.20, Subnet Mask :- 255.255.255.0, Default Gateway :- 192.168.1.1...
6) Also assign the DNS Addresses on the Xbox
Primary dns :- 4.2.2.2...Secondary dns :- 192.168.1.1
7) Turn off your modem, router, and Xbox...Wait for a minute...
8) Plug the modem power first, wait for another minute and plug the router power cable, wait another minute and turn on the Xbox and test it...it will connect...

Similar Messages

  • I Have A WRT110 model and it will not let my Xbox 360 pro connect to the Internet

    Hello and thank you for helping if you can.
    I own a WRT110 Model and a Xbox 360 Pro. Both are fairly new and work good. Problem is the xbox can not find the DNS and cant find the xbox servers. Ive tried power cycling and putting the xbox manually and auto. I can acess the internet and Xbox.com on my pc. I just dont know what else to do. And idk if it's something to do with the ports or something on the internet page for the modem. Please please help!

    Well before that.
    My internet provider is Suddenlink and my modem is ArrisTM602G
    Could it be that Suddenlink OR the modem is blocking gaming ports?
    Cause my ipod touch works with my wi-fi no problem so its wried that my ipod wwill work but not my xbox
    Thank you again for helping

  • E3000 Setup Issue with Xbox 360

    I just got my new router and went to setup it up. I put my laptop next to the router and followed the directions on the disc, once the install was done i could not access cisco program on the laptop. I decided to access the web base setup panal to get the 5ghz channel set up for my Xbox and leave the 2.4 channel alone.
    My xbox shows that it is connected to the router but it won't get past the internet portion of the test.... I have found no posts about this issue, and plenty of port forwarding posts. Anyone think that port forwarding would help this matter?? I have 1 xbox 360 that i want on the 5 ghz channel and the rest of my stuff i had setup on the 2.4 ( ps3, ipad, ipod, laptop ) . At one point i couldn't even access the internet from those items. I did a full reset on the router and tried installing the program again with no joy...
    I reconnected my old router for the time being and it all worked fine ( WRT110 model )....  I am out of ideas

    Its always worth a shot, but i ran into sorta the same problem with the WRT110, when i tried to run it on N only for the Xbox.... Thats why i got this one so i could run my xbox on N 5ghz and the rest on B/G 2.4.... Thanks for the feedback, i will give it a shot and see if there was somthing i missed.

  • Xbox 360 to iMac, lets finish this once and for all!

    Hello Everyone!
    New to the forum here and I joint to get a finalised answer to a question I've heard people bickering about for ages! (hopefully the answer will come from someone who has done it/tryed it, not just someone who is going to create a theory of what would work!)
    So I want to use my iMac as a screen for my Xbox 360, because, well, it would be awesome!
    I have so far heard too many different things, for example, if I have a new 27" iMac (which i do) that its possibly just a single wire, mini DisplayPort to HDMI.
    Another thing i have read said, it can only be a single mini DisplayPort to HDMI as long as i have 8GB of Ram.
    Another has said I need to get a complete video converter to run through my mini DisplayPort that would cost around 150 pounds.
    I'm a student and cant really afford to be wrong other wise I would guinea pig this myself, so what im asking for here is someone to lay the smack down. Which is it, if any?!
    Does anyone even know if it has been successfully done yet!? And if it has, to how much success, does it have high lag? Because the guys at AppleCare Support were pretty sure it has been, but they were not allowed to recommend me anything because there is no official Apple fix for it. . . . Hence the reason why i was directed here. . .
    Thanks in advance!

    The answer is behind Door #3. It is a very expensive proposition.
    The two way mini-DisplayPort on the 27" iMac will only accept DisplayPort signaling. So you need a device that has DisplayPort video output, such as a new MacBook Pro which can be attached to the iMac with a simple m-DP to m-DP cable. If you have a device with a DisplayPort video port you can attach it to the iMac with a DisplayPort to m-DP cable. But if the device has any other video output, then you need a video converter to convert the signal to DisplayPort. And most of these converters can only supply 720p to the iMac. One very expensive one can do 1080p.
    You can get the converters from Kanex and Atlona.
    http://www.kanexlive.com/products/kanexXD.html
    http://www.atlona.com/Atlona-HDMI-to-Mini-DisplayPort-Converter-and-Scaler.html
    Dah•veed

  • Importing xbox 360 video clips into imovie 6.0.3sk

    Hi, I have an xbox 360 that I would like to import some video clips off of onto my computer using imovie. I have a Powermac G4 with a dual 1.4 ghz cpu, 2 GB of RAM, and lots of HD disk space. I am using an ADS Pyro A/V link for capturing video. I have used this many times in imovie to capture video directly from a TV, VCR, DVD player, etc. For some reason when I hook up the cable from the xbox 360 to the Pyro (using either component connection or composite/RCA connection) and hit play in imovie to preview what's being converted, it can't process it. Sometimes it will show a bunch of pixelated squares, sometimes it won't show anything. Every once in a while it can process the sound, otherwise it doesn't show anything. After a few times, it says the pyro has been disconnected, although it obviously hasn't been. I've also tried directly importing without previewing it during the import, but that doesn't work either. I'm not sure if I need to set something a certain way? But I know you can import from the 360 because there are obviously many video clips floating around the internet taken straight from the xbox.
    Anybody know anything about this or have any ideas? Any help would be much appreciated. Thanks in advance

    Nevermind...I figured it out. There is a little button on the video cable that toggles HDTV on or off. Apparently it has to be off. So if anyone else has this problem, hopefully they can learn from my mistake.

  • Step by step complete setup for WRT54G ver.6 with Laptop and XBOX 360

    Hello.  I am sorry to post this, I am sure it is a juevenile and redundent question...but I have tried to look for the set up cd (I can find where to download it...though I can find the firmware upgrade or whatever).  My friend at work said it would do all the setup pretty much automatically for me.  
    I somewhat know computers, but you might go ahead and make your replies VERY lamen's terms or I might not be able to follow.  Anyways, what I need, is a step by step/screen by screen directions for a secure network.  I have made a partial attempt at setting it up and it technically works, but I would feel better if I did the steps a-z in order, so I know that it is done correctly.  I also am not totally confident in its security as it is now.  (Also, technically, I did not check the XBOX again after getting the new laptop, I am just assuming it is still working because it was before).
    My problem is I can't seem to find very good directions for setting up the router...I only find partials or confusing directions.
    So here are the things I am trying to connect:
    Liksys WRT54G ver. 6
    Gateway Laptop running Windows Vista
    XBOX 360 - WIRED
    (I had a PC and a laptop, but they both died at the same time and I have only been able to replace the laptop at this point...the PC will come later and not sure at this point if it will be Wired or not).
    I have a cable Modem between the Router and the wall...I didn't look at that for brand/etc...but I can get it ASAP if needed.
    Here are the settings that I have so far:
    Changed the Router Name
    Changed the SSID
    Have DHCP set to 3  (XBOX, PC, Laptop)
    Wireless SSID Broadcast: Disable
    Username and Password changed to my own info
    UPnP: Enable
    I may have changed other things without knowing it.  So like I said, a complete, step by step screen by screen set up would be totally appreciated.  I haven't done anything in the security tab, all that is totally foreign to me, so I am just not broadcasting for now until I can get some help setting things up with you guys.
    And if someone is familiar with the Laptop/XBOX 360 setup, and I need to change any of the settings on the XBOX itself, could you please include that in your directions?  I know that isn't technically what THIS forum is for, but it would sure be helpful to me if you happen to know both parts anyways.
    Thanks a lot (in advance)!

    So all you just need to do is, secure your Wireless Network. Follow the setps bellow and change the settings on your Router.
    Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
    For Wireless Settings, please do the following : -
    Click on the Wireless tab
    - Wireless Network mode should be mixed...
    - Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
    - Set the Wireless channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
    Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
    For Wireless Security : -
    Click on the Sub tab under Wireless > Wireless Security...
    Change the Wireless security mode to WPA, For Encryption, select TKIP...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and remember the key.
    NOTE : Passphrase should be more that 8 characters...
    Now see if you can locate your Wireless Network and attempt to connect...
    Click on Advanced Wireless Settings
    Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
    Now see if you can locate your Wireless Network and attempt to connect... 

  • Ipod on Xbox 360, some songs don't show up

    I recently bought an Xbox 360, I have been using my Ipod to listen to music but some songs don't show up in Xbox playlist, particularly the music I have bought and downloaded from Itunes music store, Is it some kind of protected format, what can I do to fix it, any help would be great, thanks

    This isn't foolproof but there are usually two things that contribute to songs not appearing under Artist on the iPod, both due to information either in or missing from the Get Info>Info tab against the song in iTunes. 1) the song has no album name associated with it or 2) the song is marked as part of a compilation.
    If tracks are missing an Album name (as mentioned above) in the Info tab, this information needs to be filled in. The no album one is a bit quirky as the songs will appear under certain circumstances but the simplest remedy is just add None or Miscellaneous in place of a title. See this link for more detail: I don't see some of my songs when browsing by artist on my iPod
    Also if the tracks are ticked in the Get Info>Info tab as part of a compilation, they will not appear under Artist on the iPod. Highlight a song in iTunes that you know is not appearing correctly on your iPod. Right click on it and choose Get Info and click the Info tab (alternatively choose Get Info from the File menu), if "Part of a Compilation" is marked untick it and afterwards update your iPod, you should find it now appears as normal. Compilations are stored in a separate folder in iTunes so the songs don't appear inside the normal Artist>Album folder which may be why this happens.

  • Intermittent network performance with WRE54G on Vista, and no Xbox 360 connectivity

    I bought a WRE54G this week to help with some network dead spots in my home after moving house.
    So far I've only had no real success - configuration seemed to take a while to work through (by the time I got the WPA PSK worked out) but now I at least have 2 blue lights on the device all the time.
    On my Windows Vista Business laptop (Toshiba Tecra M400 with latest drivers) in my office (a deadspot) I can connect to the network and WirelessMon reports consistent signal strength of 60% with occasional drops to 40%. However although the connection seems to remain constant, connectivity is not. I seem to suffer severe degredation of network connectivity - streamed video will not buffer correctly and times out; connections to my corporate Exchange server are not retained. My guess is that the laptop is doing something like switching between the router WiFi network and the WRE54G network, although i I switch off the WRE54G I lose all network connectivity to my latptop in my office.
    On my xbox 360 (using the Microsoft XBox 360 wireless network adaptor) I am also having problems. Once or twice I have successfully been given an IP address and then failed to get DNS servers. This evening I don't even get an IP address.
    I'm stuck - I've tried a LOT of things and not achieved any luck. Can anyone suggest anything, or do I have a faulty range expander.
    Details below....
    My ADSL router is an SMCWBRA79042 which does support WDS. All the devices in my house worked correctly with this router in my old house before introducing the WRE54G.
    I use WPA PSK, TKIP. However I've also tried to get things working without any security at all, and then adding in security functionality afterwards.
    I have already upgraded the firmware on my WRE54G to the latest version on the linksys web site.
    I have tried using different channels. Initially I was on 8 (it was a free channel in my neighbourhood) but also have tried 11 and am now on 6.
    I have tried changing the beacon to 50 and reducing the RTS and fragmentation thresholds to 2250.

    Hi
         Have u checked the compatibility of manufacturer's of these two devices i.e ADSL Router & Range Expander ( IMP * version No of WRE54G ) .
    Cheers. !

  • Airport extreme connecting with xbox 360 wireless adapter problems...help!!

    Has anyone linked their xbox 360 wireless adapter to an Airport Extreme? I need help! Neither Apple nor Microsoft knew how to link the two devices. If anyone has successfully been able to make this work, your help will be much appreciated. Thanks guys

    Yes - Mine works no problem. I have found that I have to unplug the Xbox360 wireless adaptor and plug it back in occasionally (if the green light is on everything is fine). Are you using the correct WPA Key?

  • How do I connect my Xbox 360 to my iMac

    I want to use my imac as a TV so i want to know how to connect the xbox 360 to my imac.
    Thank you for your support

    What iMac model do you have ?
    The 2011 ThunderBolt iMacs only work with other ThunderBolt Macs Thunderbolt 10.6 Help: Using another Mac as an external display
    For the 2009 and 2010 27" iMacs with Mini DisplayPort you would need something like the Kanex XD http://www.kanexlive.com/xd
    The Kanex XD is not compatible with ThunderBolt iMacs.
    Stefan

  • Can I use the mini displayport to vga adaptor with the xbox vga cable to connect my xbox 360 to my macbook pro?

    I'm trying to find a way to connect my xbox 360 to my mackbook pro. I've searched the internet and found that I can use a eagle eye device but, its to expensive. So after looking at the xbox website, I found a vga adaptor for my xbox and an vga to mini displayport and I was wondering if this would work.

    The minidisplay port is output only. It's not going to show anything from your xbox.

  • Using the Mac as a wireless Bridge for the Xbox 360

    Want to use your Mac essentially as a wireless adapter for an Xbox 360 or any console? plug in the ethernet cable between the two devices and follow the setup process!
    Wireless Bridge setup process
    1. Open system Preferences.
    2. Clisk sharing, then the internet tab and select Airport as the “share your connection from” then select the Built-in Ethernet in the list.
    3. Open up the terminal Application and type ifconfig en0 in the window it sohuld display an outcome like this
    ifconfig en0
    en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    inet 192.168.2.1 netmask 0xffffff00 broadcast 192.168.2.255
    ether 00:16:cb:cc:80:aa
    media: autoselect status: inactive
    supported media: autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 10baseT/UTP <full-duplex,flow-control> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback> 100baseTX <full-duplex,flow-control> 1000baseT <full-duplex> 1000baseT <full-duplex,hw-loopback> 1000baseT <full-duplex,flow-control> none
    4. This gives you the information of what your computer’s IP address is. On the xbox dashboard in the network setup screen select manual and select the top section which contains the IP address, subnet mask, and Gateway address, for the IP address, input the Highlighted section above plus one, so its 192.168.2.1 (this is for standard configurations, again, just add one to the last digit of your IP address.
    5. Open Airport Admin Utility, the select configure on your airport. Then select the Internet tab This will give you your subnet Mask, input accordingly.
    6. For the Gateway address, you are going to put in the value in the blue box. This is because you are using your Computer as a gateway, therefor you need to tap into its connection.
    So For the Average setup you will use:
    IP Address: 192.168.2.2
    Subnet Mask: 255.255.255.0
    Gateway Address: 192.168.2.1
    7. Now for the DNS server, this varies according to What internet service you have, but, Airport admin utility provides the answer, right below the information we used above, you will see DNS Server. viola! Put that in as your primary DNS server in the second box of edit options in the network menu.
    Now you should be complete, test the connection and you should be Ready to Go!! Happy Gaming!

    Welcome to the discussions, DanSwiggsD!
    If you have a non-Apple device as your main router, unfortunately the AirPort Extreme has almost no chance of compatibility with your main router.
    If you do have an Apple router as your main device, please post back with your model number and we'll let you know how your devices should be configured.
    If you don't have an Apple device as your main router you have a few options to connect the xbox:
    1) A pair of ethernet powerline adapters could be used if you did not want to run a regular ethernet cable from your main router to the xbox.
    2) The new AirPort Express 802.11n model does have a feature called Proxy STA which should allow it to receive a wireless signal from any wireless router and allow the ethernet port to be enabled.
    Message was edited by: Bob Timmons

  • Thinking of buying an Xbox 360, but not sure if I'll be able to connect...

    So, as the title says, I'm thinking of trying to get an Xbox 360, but I don't know if I'll be able to connect wirelessly to our Time Capsule with the Microsoft Xbox 360 Wireless Network Adapter.
    I've been reading the most recent threads on here that I could, and some say you can connect wirelessly now as of July and the 7.3.2 update, yet other threads say it doesn't work. What should I believe? I really don't want to spend the $400+ on the Xbox, only to find I can't take it online.
    Does the Microsoft wireless adapter connect to the Time Capsule yet? Or if it doesn't, what would be my best bet for a wireless adapter?
    Thanks in advance to anyone who can help me out with this.

    hello.
    i have a similar question. i have a 360 in my basement. my imac and modem and router are upstairs on the first floor. the 360 has a ethernet cable that comes with it. can i use that and purchase an airport express to connect to the network? After plugging the ethernet cable into the airport express, would that work? Or would I need more hardware (sorry if I seem computer illiterate, but i'm not familiar with networking)?
    ive been reading these forums and a lot of people say that they have time capsule or airport base station. do i need these too in order to connect to the internet, even though I already have a Linksys wireless router? Any help will be appreciated.
    Thanks,
    bluesee06

  • If you have a Slingbox and an Xbox 360, this will solve 360 connection prob

    I got my TC on Wednesday of this week and starting hooking everything up. I had a PS3, Wii, Xbox 360, Printer, and Slingbox Pro that I wanted to hook up. Slingbox, PS3, Wii, and Printer all work fine, but the Xbox would not cooperate as many of you have found out. So, I took my old linksys router that I was not going to use anymore, turned off its wireless functionality, so it simply acted like a signal pass through with multiple ethernet outputs. I unhooked the Slingbox from the part I speak of below, and attempted to use the linksys to split an incoming signal to the Slingbox and the Xbox 360, which ended up working like a charm.
    When I bought my Slingbox, I knew it was not going to be able to be close to my router, so I purchased one of their additional products (links below to products) call the Sling Link Turbo. Most of you are probably aware of this but for those of you that are not, it is a neat device that sends your internet signal through the electrical wiring in your house to a different location where it is plugged in another wall outlet. The catch is that both plugs have to be directly into a wall, it cannot go into a power strip or surge protector. I had this product by default on Wednesday and it helped me fix the problem, so it might benefit those of you that are interested to pick one up, the single port is not that expensive.
    http://www.slingmedia.com/go/slt
    http://www.slingmedia.com/go/slt4
    Moving on now, I connected the Slink Link Turbo to the back of the TC and plugged it in. Then I plugged its counterpart into the wall behind my TV so it could sit next to the Slingbox on top. I then ran an ethernet cord from the Sling Link Turbo to the WAN port on the Linksys router behind the TV. Then I ran an ethernet cord from the output ports on the linksys to the Xbox 360 and another cord to the Slingbox.
    This is where things got tricky because I had to forward the ports in order for the slingbox to work. I set the TC to reserve the IP 192.168.0.200 for the Linksys router. I set my linksys router to be have a static IP at 192.168.1.200 (not a typo) and I set the DNS Server to 192.168.0.1, which is the TC's router IP. Then I set the port forwarding on the TC to open port 5001 to 192.168.0.200 on all ports, Public and Private UDP and TCP. Then I set the Linksys router to open port 5001 to IP 192.168.1.253, which is the Slingbox.
    Do not set any static IP for the Xbox 360, it works great without it and if you set it it probably is not going to work.
    Now, hold down the reset button on the Slingbox for 20+ seconds to reset it completely, run through setup, takes about 3-5 minutes, and make the IP address 192.168.1.253 and leave the other settings as is. If it will not work, change the router to either IP 192.168.0.1 or 192.168.1.1, whichever one it did not show up as wanting to be. Then make sure the port is 5001 and you should be good to go on the Slingbox even remote viewing. If you have problems here, pop me an e-mail.
    Now for the Xbox 360, plug it in, turn it on, test connection settings, it should work perfectly on all accounts, mine has so far.
    I now have a PS3, Wii, Printer, Xbox 360, and Slingbox Pro running on the N connection, I did not have to downgrade the settings to b/g for the Xbox 360 to work. However, my linksys router is old and only supports G, so I'm not sure if my N signal translates through to the Slingbox and Xbox, but they still work great. And the rest of my house can use the N signal with no problem.
    If you have any problems please e-mail me and I will try to help as much as I can.
    Good luck.

    I have a question which I'm hoping you can answer. My dad lives in the states and has a slingbox connected. I live in another country and watch american tv through internet (i.e. through the slingbox he set up). I also have an xbox 360, which is connected to the TV in the living room. Do you know if it's possible to wirelessly stream the computer content (i.e. the slingbox content) to the tv in the living room through the xbox?
    Thanks
    Netta

  • How do I connect Airport Extreme to XBox 360 live

    I just bought an Airport Extreme to use as my wireless router.  Everything connected beautifully EXCEPT my all in one HP Printer and my XBOX 360.  If I manually enter the settings, I can connect but only for a minute or 2.  Once my son starts using xbox LIVE, the connection gets dropped.  All instructions I can find must be for older utilities.  I eventually plugged in my old G Router into an open LAN port on the back of the Airport Extreme and got my printer working when connecting to the old network ID but still can't get XBOX 360 to connect and stay connected.  Any help is appreciated. 

    Ok, thanks for the update. Do you have the Xbox connected to the 802.11n AirPort Extreme Base Station (AEBSn) by Ethernet (wire) or by wireless? If wireless, temporarily connect it by Ethernet to verify that you can get connectivity via this method.
    If you were using wireless, which of the following is the wireless adapter that you are using?
    802.11g or
    802.11n?

Maybe you are looking for