Xcode for Mac OS X 10.6.8

Hi!
I need to download the xcode for my system version (Mac OS X 10.6.8) and I can´t...
CXcould anybody help me please?
Thanks!

I´ve tryed but there is a problem and I can´t see the links...they suggest me to try again but I´ve been trying for hours and it´s impossible...thanks anyway for answering...

Similar Messages

Where can I download Xcode for mac osx 10.7.5?

Where can I download Xcode for mac osx 10.7.5?

Xcode 4.6.3 can be downloaded from the Developer Downloads (you will need to be registered for access).

How do I play an audio file in Xcode for Mac OS X?

I have been looking and looking, and I still can't find out how I can play a sound in Xcode. I have done it for the iPhone, but I'm trying to do it for Mac OS X. I am a beginner and so I am going to need some explaining as to what is going on. I just need to play a short sound (max of 10 seconds) when a timer goes off. Any help is very greatly appreciated (I have been trying to get this to work for WEEKS)! Thanks in advance.

https://developer.apple.com/mac/library/samplecode/PlayFile/Introduction/Intro.h tml
Docs are your friend....mac os has it's own just like iPhone.

How to develop a simple plugin for adobe illustrator cs2 using xcode on mac os

I would like to know the steps to develop a simple plug-in for adobe illustrator cs2 using xcode on mac OS...anything like a dialog box displaying "hello World"... I m new to MAC OS...Please help...
Thanks in advance

Get the SDK and start playing with the sample plug-ins. Asking for something as general as "how do I get started" is asking a little much from this forum :) Try your hand at the SDK and come back to ask more specific questions as you run into them.
Bear in mind that this isn't an Xcode forum either, though I'm sure there are places to get good help on that!

Download xcode 4.0.2 for mac os 10.6.8

hi everyone ... i am using mac mini with mac os x 10.6.8 and would like to install xocde 4 but i am not be able to use the latest version of xcode 4 which is xcode 4.2 because it only compatible for mac os x 10.7 and above.. but i would like to use the xcode 4.0.2 but i dont see there is a link for me to download throught apple website or maybe there is somewhere else in the website for me to download .. do anyone know about it or the link? on the other hand, my stingy boss is not wiling to upgrade the mac os to lion and would like to use xcode version 4... but i just found xcode 3.2.6 thru teh website ...
thanks and regards.

hi guys,
i've got the same problem: "how is it possible to have Xcode-4 compatible with OSX-10.6.8" (is there someone who couldn't not undertstand the question ?).
with an account in developper section, you have to acces a "download page" with some off "xcode" program files... but NEVER the 4.0.2.
So (for guys who don't understand all the previous message...) in the disk installation of OSX-10.6 there is no xcode-4, but Xcode-3... so WE WANT Xcode-4 on OSX-10.6.8 (what is so difficult to understand guys ?), because OSX-10.7 Lion is not a "good" OS for workers (bad stability and to commercial version... not realy pro version), and we can't do all thing you do with 10.6.8 version... so the 10.6.8 version is more stable than the poor 10.7 version who is to young.
Xcode-4 (the first version) can work on 10.6.8, but Apple don't want to take it on his download page... WHY ?
is there the new politic of Apple to make money without making good job ? Is there the new commercial politic of Apple to sale poorless quality and no service at a big price ? What is it ? is it the end of Apple quality bisness ?... I think it is your bad way now, and i'm so sorry.

Which Xcode version is compatible for Mac OS X v10.7 Lion ?

Hi,
    I buy a latest Mac mini with OS version of MacOS X v10.7 Lion. On that, I install xcode of the version 4.2. But after that I am facing lot of problems while working,
            The problems, I am facing are:
                                                                The xcode is very slow,
                                                                Frequent crashes while using xcode,
                                                                Unable to create the bundle (or) unable to run the simulator after writing the code.

bathiudeen wrote:
Which Xcode version is compatible for Mac OS X v10.7 Lion ?
v4.2 (free from the App Store)

HT4767 i have a mac os x version 10.7.2 . but i don't find Xcode for 10.7.2 . can you help me!!!

hello
i have a mac os x 10.7.2 . but i don't find xcode for 10.7.2 . can you help me.

IIRC = if I remember correctly.
http://www.acronymfinder.com/IIRC.html

Any AE plugin Xcode sample project with cuda for mac?

Hello everyone,
As suggested by the AE sdk, I start to create my plugin with sample project from the SDK.
However, I can not find an example with CUDA support for mac.
Now I have some troubles to setup an adobe plugin project with CUDA support for mac, as cuda files are compiled by nvcc.
Anybody can tell me where I can find an example to build an AE plugin with CUDA for mac?
Thanks for your help.

For anyone following along, I’ve been able to create a sample project that uses CUDA in Xcode, and will include it in the next PPro SDK. If anyone is interested in getting it sooner, let me know.
The most useful post I saw on this was this single post here:
https://devtalk.nvidia.com/default/topic/386632/cuda-programming-and-performance/integrati on-with-xcode-anyone-created-a-cuda-template-project-/post/2743943/#2743943

Xcode on Mac Mini, didn't work for me

Awhile back I downloaded Xcode for my Mac Mini and It didn't work and uninstalled it. Should I download it again, and if it doesn't work again what should I do?

Find your OS install discs and try to install Xcode from there. If that works, then download the updates again.
Make sure that any anti-virus software is disabled...don't use FileVault....repair permissions when done...install to the default location.
Tens of thousands of devs have successfully downloaded and installed, so I wouldn't be too quick to blame the source

Is there any way to create an installer for Mac OS and Linux OS once a stand alone application is created?

Is there any way to create an installer for Mac OS and Linux OS once a stand alone application is created? I have created an executable application that I want to distribute to Mac and Linux users (different applications were created in the respective OS). I was wondering if there is any way to create an installer? I think there probably isn't... If the user were to simply download the Labview Run-time Engine from ni.com would they be able to run the application or is it more complicated than that?
Thanks so much for your time.

I think Shane tried to say, that it is on the Mac OS X installation DVD, NOT the LabVIEW for Mac OS X installation medium. And that could very well have changed in recent Mac OS X versions as well. They used to have Xcode on it too, but that seems gone as well.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Java templates gone from XCode for 10.6

I went back to rework some Java applets I have written and discovered they don't compile anymore in Xcode (at least as before)
Hmm. I had Java templates, downloaded the latest XCode and the templates are gone. My 'old' applets won't compile complaining 'Jam is deprecated and has been removed; targets that use Jam must be upgraded to native targets. For more information on doing this, consult the Xcode documentation.'
I found a separate Java SDK download? From
http://developer.apple.com/java/download/
has 10.5 version listed only
Clicking on the link goes to the (old) log-in page for the Developer program and the download/Java link goes to a page with 10.6 Java downloads - Developer previews.
Still no Java templates (in Xcode). Maybe I should read the documentation (if I can find where it was installed). I was able to 'compile' the Hello World applets in the organizer window but no 'Hello World' in Safari.
What's happened to the 'old' system for Java development?

After installing XCode 3.2.1 there were no Java docs or Java templates. I installed the Java files and docs for 10.6 from the developer site. Searching XCode for Java gives a lot of Javascript items but no easy answers for Java. Using the Organizer window instead of the Xcode project window is a big change. I must have missed it but searching this forum, Xcode and now the java-dev mailing list archive hasn't given me good answers. One answer seems to be to put Mac OS X10.5 on a separate volume, install the older XCode (or current??) and develop Java one OS version back.
The Hello World applet didn't run for me when I tried it. Blank browser window. Java Preferences seem to default for 10.6
"Create Java projects in Xcode 3.2 using Xcode's Organizer. Choose Window > Organizer to open the Organizer. Click the + button at the bottom of the Organizer. Choose New From Template > Java Templates." > Java Applets. Build
BUILD SUCCESSFUL
Total time: 1 second
The Debugger has exited with status 0.
gives a new window in Safari but it is empty.

Adobe AIR ANE for Mac OSX 32-64bits Error

Hi,
I'm trying to build a ANE for Mac OSX. I setup XCode 5.1 and was following this two tutorials:
http://riawanderer.com/2012/03/27/working-with-air-native-extensions-on-the-mac/
http://quetwo.com/2011/12/03/working-with-air-native-extensions-on-the-mac/
To get the project setup.
I'm finding that Adobe AIR.framwork in folder /runtimes/air/mac is 32-bit, but XCode has deprecated 32-bit...so I'm finding this error when I try to build the project:
error: -fobjc-arc is not supported on platforms using the legacy runtime
Command /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/cl ang failed with exit code 1
So right now ANE development for Mac OSX is broke since I can't build a cocoa framework library due to 32-bit deprecation and Adobe not updating the library since 2011
I'm right or maybe I'm missing something.
Hope someone could give some path to solve this since it's very frustrating to deal with this stuff to see there's no update for this basic libraries for Mac.
If what I'm seeing is true, I see another error in Adobe stack that make people like me supporting the platform tired of deal with this kind of things. Sorry to be sound so frustrated but it's a very negative experience for the Adobe AIR platform since you see that a part of the platform is not updated for 3 years!.
Thanks
Carlos

Does what is talked about here help in any way?:
http://stackoverflow.com/questions/22363266/xcode-5-1-force-32-bit-compilation-for-a-cocos 2d-iphone-v3-project

Can't download xcode on mac says:Xcode can't be installed on Macintosh HD because Mac OS X version 10.7.4 or later is required.

can't download xcode on mac says: Xcode can't be installed on Macintosh HD because Mac OS X version 10.7.4 or later is required.

You need to upgrade your operating system; call 1-800-MY-APPLE, ask for an OS X Lion download code. It will be $29 or so.

Filter plugin on wxWidgets for Mac's photoshop

Hi.
I'm developing a photoshop filter plugin for Mac OS X with XCode.
And i have a problem with dialogs. Dialogh creates correctly only first time, than dialogs creates without redrawing (it takes input, but main area of dialog is whiteness)
My source code here:
#include "Dissolve.h"
#include "Dialog.h"
#include "About.h"
#include "DissolveScripting.h"
#include "FilterBigDocument.h"
bool started = false;
FilterRecord *gFilterRecord = NULL;
int32 *gDataHandle = NULL;
int16 *gResult = NULL;
SPBasicSuite * sSPBasic = NULL;
Data *gData = NULL;
Parameters *gParams = NULL;
class wxDLLApp : public wxApp
public:
AboutDialog *dlgAbout;
public:
bool OnInit(){
wxMessageBox(_T("wxDLLApp::OnInit()"));
dlgAbout = new AboutDialog(NULL, wxID_ANY, _T("About"),wxPoint(200,200), wxSize(446,150), wxSTAY_ON_TOP|wxCLOSE_BOX);
dlgAbout->ShowModal();
return true;
int OnExit(){
wxMessageBox(_T("wxDLLApp::OnExit()"));
dlgAbout->Destroy();
delete dlgAbout;
return 0;
DECLARE_EVENT_TABLE()
//IMPLEMENT_APP_NO_MAIN(wxDLLApp)
BEGIN_EVENT_TABLE(wxDLLApp, wxApp)
END_EVENT_TABLE()
wxPoint offscreenPoint(-5000,-5000);
void DoAbout(void);
void DoParameters(void);
void DoPrepare(void);
void DoStart(void);
void DoContinue(void);
void DoFinish(void);
DLLExport MACPASCAL void PluginMain(const int16 selector,
void * filterRecord,
int32 * data,
int16 * result)
gFilterRecord = (FilterRecordPtr)filterRecord;
gDataHandle = data;
gResult = result;
switch (selector)
case filterSelectorAbout:
DoAbout();
break;
case filterSelectorParameters:
DoParameters();
break;
case filterSelectorPrepare:
DoPrepare();
break;
case filterSelectorStart:
DoStart();
break;
case filterSelectorContinue:
DoContinue();
break;
case filterSelectorFinish:
DoFinish();
break;
default:
break;
void DoAbout(void){
wxDLLApp *pMyApp = new wxDLLApp;
wxApp::SetInstance(pMyApp);
int argc = 0;
char **argv = NULL;
wxEntryStart(argc, argv);
wxTheApp->CallOnInit();
pMyApp->OnExit();
wxEntryCleanup();
void DoParameters(void){
void DoPrepare(void){
void DoStart(void){
void DoContinue(void){
void DoFinish(void){

[email protected] wrote:
>...
Nice to see you back on the forums, Chris. Your expertise has been missed.
-X

Using XCode for Cross Developing (Target would be Linux x86)

I'm developing RealTime Software - running as RT-Kernel modules - written in C for Linux x86 (RTlinux on Kernel Version >2.4.32 or RTAI on Kernel Version 2.6.x).
At the moment I develop using ssh and vi on the target machine. This is NOT very comfortable.
After searching your forum I found:
http://discussions.apple.com/thread.jspa?messageID=2322911&#2322911
Fine Links to the XCode Documentation. But reading it I just found how to cross develop to MacOS X targets (x86 and PPC).
Can you please tell me, if it is possible to use XCode for cross development with target machines using Linux on x86?
Thank you
Johann

In theory, yes. In practice, no. You would need a version of GCC that supports targeting that architecture and all the header and library files for that architecture. It is highly unlikely to be worth the time and effort to try it and it may not even work even if you do everything right. Plus, you would still have to run and test on the target platform.
You'll just have to make life the best that you can on Linux. I suggest downloading the NEdit editor for X Windows. It is as good as any Mac editor and very easy to script for automation.

Xcode for Mac OS X 10.6.8

Similar Messages

Maybe you are looking for