Xi adaptor

hi all,
i want to communicate betweenn two xi systems <b>XI(A) TO XI(B) through xi adaptor</b>, but i dont know how to<b> configure it in SLD and ID</b>, can anyone suggest me the steps or example scenario of this type of case.
thanx
HONEY

Hello Honey ,
For Configuration it in SLD
Hi,
Choose Home ® Technical Systems.
2. Choose New Technical System.
The System Type screen appears.
3. Select the Web AS ABAP indicator and choose Next.
The General screen appears.
4. Enter system details and choose Next.
The Central Servers screen appears.
5. Enter message server and central application server details and choose Next.
The Application Servers screen appears.
6. If you want to define additional application servers, choose Add Application Server, enter the host name and instance number, and choose Next.
The Clients screen appears.
7. To add at least one ABAP client, choose Add New Client, enter client number and client logical name, and choose Next.
The ABAP client number is required, it must be a three-digit number. The client logical name is optional.
The Installed Products screen appears.
8. On the left, select installed software products by selecting the Installed indicator.
On the right, all software components that are part of the selected software products appear.
9. On the right, select installed software components by selecting the Installed indicator.
10. Choose Finish.
With Regards,
Raju

Similar Messages

No Apple Remote or Apple Mini-DVI to VGA Adaptor included with new MacBooks

Hi!
I just picked up a new (black) MacBook yesterday from the Apple Retail Store in Meadowhall (Sheffield). I was quite surprised to open the box and find that the Apple Remote and Mini-DVI to VGA adaptor cable are now optional items and no longer included in the package. Okay, they're not expensive (an extra £30.00 to add both of them), but I just thought I'd mention it to let potential customers know.
I have to say that I'm very pleased at the speed bump and the 250GB hard drive though (you can never have too much space). Also good to have 2GB RAM out of the box (rather than paying an extra £90.00 for the 2GB model). Excellent!

bford0001 - 15% restocking fee? Did you buy it from an Apple Retail store? I bought a black MacBook from them just under two weeks ago (a 2.2 with 160GB HD and 2GB RAM) and they let me take it back and walk out of the store without charging me anything!
One other thing I have noticed - why has the L2 cache dropped to 3MB from 4MB? I know the processor is more powerful, but doesn't that mean it would just about level out, because of the reduction? I noticed the same for the £1,299.00 MacBook Pro and that on the other two models, it's gone up to 6MB. Anyone know how this would change the performance?

Mini-DVI to video adaptor tv connection issues

Could it possibly be with the new software upgrade? I just updated from 10.6.1 to 10.6.2 and all of a sudden my Mini-Dvi to Video stopped working. I'm using my Mini-DVI to VGA without problems at work with the same computer and a few minor adjustments to the display prefs.
Apple says the 10.6.2 update was supposed to correct display issues. Could they have accidentally deleted support for the adaptor while correcting other issues?
Perhaps the cheapest solution to this would be to downgrade back to 10.6. Any advice on this?
I'm running a 2.2 Core2 Duo MacBook from mid-`08.
I also found this article on PCstats http://www.pcstats.com/articleview.cfm?articleid=2147&page=3 that says the GMA X3100 chips do have integrated graphics for analog, s-video etc... so I'm guessing that somebody may have accidentally deactivated the analog features of the chip while writing the graphics update. Only my guess I'm not a programmer.
Message was edited by: JGrat

With your TV hooked up to your Macbook, you should be able to view anything on your computer. If you have all of your pictures in iPhoto, your best option is to use FrontRow by using the remote.
(make sure your displays are mirroring eachother, Preferences>Displays)

FDMEE: Source Period Mapping in Open Interface Adaptor

Hello,
I want to use open interfce Adaptor to load data in FDMEE (AIF_Open_Interface) from a Custom SQL Source where periods are in rows and data in last column of SQL table, like
Fyear      period      entity      account      Currency      Data
2012      1           10000           100022       USD          171778.87
2012      1         10000           100022       USD           -10343
please suggest, how can i bring this data in FDMEE ?
Many Thanks !!!

Hi Ramanujam,
There are 3 methods to update the Calendar or defining the period
E-Business Suite and PeopleSoft calendars have these important elements:
Calendar—Identifier for a calendar
Start Date—Start date of the period
End Date—End date of the period
Refer the section "Define Period mappings" (Pg 102 - 108) in guide - http://docs.oracle.com/cd/E40248_01/epm.1112/erpi_admin.pdf
Thanks,

Where and how can I buy a new AC adaptor for a 30" HD cinema display?

I bought large numbers of Apple products in Hong Kong but have since moved to a remote area of the Philippines where internation telephone calls are extremely difficult.
The AC adaptor of my 30" HD cinema display with aluminum case has been lost so I need to find out the price and order a new one. However the Apple shop (Hong Kong) on-line has no way to ask the price or place an order for this item. There is no on-line form no email addrees, nothing except Hong Kong phone numbers.
Can anyone please advise what I can do? Please don't suggest going to the local service center. I will never go back to our local service center after what they did last time.
Thank you.
Frank

Thank You.
I have emailed them to ask if they will deliver to Hong Kong via USPS.
I may need a video card for a MacPro so I will order that from them also.
Thanks again
Frank

Ethernet to USB adaptor no longer being recognized by my mbp

I have an older macbook pro, which is running mac os x 10.5.8. The ethernet port is broken so I have been using a mac Ethernet to USB cable because there is no wifi at my college. I got the cable to work for a while, then I unplugged it and my computer no longer recognizes it. When I used to unplug it and plug it in I would get a message by the airport symbol that said something along the lines of ( new network usb-ethernet availible, which then would allow me to go into network preferences and give me the option to connect to the usb ethernet). Now when I go to setting with the usb ethernet device plugged in I no longer get the option to use usb-ethernet adaptor, and cannot connect to the internet.
Both the cable and port have been tested and they both work. I also havn't installled any new software recently so I have no idea what I have done wrong.
Thanks for your help

Hi Dibenkorn,
Yes, both USB ports are not recognizing this lacie external hard drive. I also tried the SMC reset but that did not change anything. I have another external hard drive (smaller one) and it works on this computer fine and like I said before the Lacie works fine on my other (older) MacBook. I just can not figure out what went wrong or what happened...

I have just purchased a lightning to 30 pin adaptor to use on an iPad mini and a gen5 iPod touch both devices are running iOS 8.1.3 and come up with The error message "this accessory is not supported by this device "

I have just purchased a lightning to 30 pin adaptor to use on an iPad mini and a gen5 iPod touch both devices are running iOS 8.1.3 and come up with The error message "this accessory is not supported by this device "
THis is means they are not charging on a 30 pin cable and the touch won't work in my Apple iPod dock - no audio out or charge. Have re powered both devices to no avail am wondering if the iOS version is the problem
Help!

If it is a lightning to 30 pin adaptor, and you have a 7th Generation Nano it has to fit the Nano.
This is lightning to 30 pin adapter: http://www.bestbuy.com/site/Apple%26%23174%3B---Lightning-to-30-Pin-Adapter/6651 936.p?id=1218803450821&skuId=6651936#tab=overview
Is this what you bought?
You need to contact Sony and see if they model you have is compatible with the docking adapter. It may not be.

SCCM remote control keeps dropping out when another network adaptor loses connection

Hey guys,
Hopefully someone will be able to help me out
at work, we are running SCCM 2012, and I use SCCM 2012 config manager to manage the clients etc
We have a particularly annoying issue with SCCM remote control; it constantly drops out when a network connection on the client machine disconnects or changes state, even if its not interface I'm remote controlling through
Here's an example for you:
a laptop with a wired, and wireless connection:
I remote control the machine through the wired network address (lets say 192.168.0.1), but if the wireless connection drops out (someone turns it off or it breaks) the remote control client will kick me off, lock the screen, and I have to wait 20-30 seconds
before it will accept my connection again
This happens with any network adaptor that's installed on the client
Here is a copy of the logs re-creating this issue: https://www.dropbox.com/s/nu4w28d44xky3rg/CmRcService.log
(I've edited it to take out usernames and IP addresses as they are publicly accessible)
So my question, does any one know how to fix this issue? I see it uses WMI, is there anyway to get WMI to ignore an interface?
Thanks heaps,
Harry

This is going to be done by design for security reasons. If the network connect for whatever reason is down the pc will automatically be locked.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Battery charging and power adaptor issues

I'm having slight issues with both my power adaptor and the battery itself.
First I think I have cord issues as the light status can change from dim green to red or bright green if I move the cord around.
Second, my MBP is having trouble recognising if power is going to the battery or if it's charging etc. It can recognise if there's no adaptor connected at all, but if there's an adaptor connected, it has trouble seeing if there's power coming from the adaptor even if the light is on. I.e. it can stay at 100% and supply comes from the power adaptor and then suddenly drop to 80% power and start charging agan. One issue that happened earlier today was the adaptor was connected, and the battery indicator was at 100% with supply from the adaptor. Suddenly the MBP shutdown, and when I rebooted it was at 17% (I've tried repeating that in case of a dodgy battery but I couldn't)
System profiler Power information: (MPB is 18 month old)
Battery Information:
Model Information:
Manufacturer: SMP
Device name: ASMB012
Pack Lot Code: 0002
PCB Lot Code: 0000
Firmware Version: 0110
Hardware Revision: 0500
Cell Revision: 0200
Charge Information:
Charge remaining (mAh): 4779
Fully charged: No
Charging: Yes
Full charge capacity (mAh): 4876
Health Information:
Cycle count: 111
Condition: Normal
Battery Installed: Yes
Amperage (mA): 285
Voltage (mV): 12603
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 0
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: No
Current Power Source: Yes
Display Sleep Uses Dim: No
Battery Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 0
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
ID: 0x0100
Wattage (W): 85
Revision: 0x0000
Family: 0x00ba
Serial Number: 0x00527d2c
Charging: Yes

Try an SMC reset.
http://support.apple.com/kb/HT3964
If that doesn't help, the problem could be the adapter, the battery, or the I/O board (or a couple of less likely things). If you can borrow another adapter and/or battery, try them to see where the problem is. Or, if you're near an Apple Store, take it in and they'll diagnose it for you (for free, but they will charge for repairs if you need them and don't have AppleCare).

Can I use an external bluetooth adaptor instead of the internal one?

HI Folks,
I need some better range for some bluetooth to serial adaptors so I purchased a class 2 (or was it class 1? memory fading but the higher output one) USB bluetooth dongle which advertised as being Mac compatible. Unfortunately when I plug that into my mini (previous generation core 2 duo mini) I can't see that I can disable the internal device. It shows up on the USB bus but as far as I can tell the system is continuing to use the internal device.
Is there a way to tell it to use the external device? Can I crack the case and remove the internal module? I know the airport module is a separate card I can unplug but can I do the same to the bluetooth?
Thanks for any suggestions!
James

heh, so I should have just tried it again. Last time I did this was a couple of OS versions ago though I have no way to know if that is what did it. Upon plugging back in the class 1 external interface is now appears that my machine is properly using BOTH interfaces. IN the discover new devices screen it now sees itself as an option which it never did before, and shortly thereafter the previously out of range devices popped up as well. So in order to use an external bluetooth adaptor it doesn't appear you have to do anything other than plug it in. It did not do this the last time I tried though.
In any case, thanks!

DVI to video adaptor question

I am new the Apple world but am thinking of buying a Mac mini as a music and photo server. I will use it mainly via a TV with the remote control and Front Row. I am in the UK and have a CRT Panasonic (28" wide) with SCART connections. I also have a Sony home cinema amp which is a couple of years old. I have read that screen resolution and quality is poor when using the DVI to video adaptor but am wondering what people's experience is when using it for Front Row only? I am hoping to find a remote control solution to use the Mac through my Windows laptop for normal Mac computing..

I've been thinking of MacMini for the same purpose and have been testing s-video output on my PowerBook G4 1.67.
Using the resolution 1024x576 gives anamorphic widescreen image to my sony 28" tube TV and I was able to browse internet and write forum entries without much trouble from 2 meter distance (around 7 ft).
Ofcourse the image is not as sharp as you'd get with a LCD, but it's a lot better than one might think. There was a checkbox saying "optimize for video" or something which seemed to sharpen the image a little. It helped getting smaller text readable.
Anyway, after seeing frontrow on a LCD display and now PowerBook's 1024x576 on a TV screen (I don't have front row on the PB), I'm sure It's more than good for that application.
Actually I didn't really find much difference between watching DVD from a DVD player or from the powerbook, when they were both connected with s-video
Powerbook G4 1.67 Combo Mac OS X (10.4.2)

Can i connect my cintiq 12wx to my Macbook pro 2011 through the thunderbolt using the mini display port to vga adaptor?

I just bought my cintiq 12wx and was wonderding if i can connect it to my macbook pro 2011 through the thurderbolt using a mini displayport to vga adaptor? Please help!

Yes, it should work with a mini-displayport to VGA adapter. Since a 12wx also can take DVI you could use a mini-displayport to DVI adapter instead. Why go analog when you can keep it in digital!
I guess the usb is for the pen.

When I connect my Macbook air to my TV, using a Mini Display Port/HDMl adaptor and an HDMl cable, the only thing that appears on the TV screen is the Air's background screen,

When I connect my Macbook Air to my TV via the thunderbolt outlet and using a Mini Display Port/HDMl adaptor, the only image that appears on the TV screen is that of my Air background. There is obviously a signal getting through to the TV, but it is not sending images of anything else, and am unable to watch video through my Air. Any advise/suggestions?

This is called "extended desktop mode". It's an extension of the desktop off to the right (by default) of your MBair screen. Grab an app and drag it off the right side of your MBair screen and it will appear on the TV.
To mirror your MBair screen on the TV you can press Command F1. This will toogle between mirror and extended desktop.
You can find all the settings in System Preferences > Displays > Arrangement tab.
Regards,
Captfred

Which Adaptors/Cords do I need to hook my mid-2010 Macbook Pro into my new HDTV?

I heard they changed the port (to include audio as well as video) after my model and I want to make sure I order the right adaptors so I can hook my macbook into my new HDTVs HDMI port.
Can someone point me in the right direction?
Thanks,
Jake

I don't know that it will carry audio on a mid-2010, but for less than $7 you can try this adapter from Monoprice.
Worked great on my late 2011. Should work for you.
Clinton

What adaptor do I need to connect from mini display port to a dvi monitor

I want to connect a 2nd monitor to my mac mini via the mini display port, will the Apple adator do this ok or will I need an active adaptor

I had trouble with different Mini DisplayPort to DVI adapters, including a couple of Apple branded ones.
When I mentioned the problem to the Apple rep. at Fry's. He walked straight over to the rack, handed me a > Kanex Mini DisplayPort to DVI-D Adaper grined and said, I've never had one of these baby's come back.
After that my 2010 Mac Mini has been very stable running Dual 21.5" Samsung DVI monitors. One in on the Apple Supplied HDMI to DVI adapter, the other now on the Kanex Adapter has been rock solid for over a year.

MacBook Pro missing video adaptor

Hi,
I have a MacBook Pro (Uniboby). I need to use it on a theater show with a video projector that will be 15 meters away.
The projector has S-vidéo, Dsub15 ou RCA inputs.
What is the best solution knowing Apple does not have a direct to RCA adaptor.
The video is standard PAL (720x572).
- Mini DisplayPort to VGA then VGA to RCA adaptor
- Mini DisplayPort to DVI then DVI to video Apple (2 Apple adaptors)
Better solutions? Thank you.

Hi Rod,
You got it right
I have access (it is not mine) to a video projector + cable.
The projector will be installed on a lights structure inside a theater.
The cable will a be +/- 15 metres long.
The basic question was: how to make it work with a MBP 2009?
It turns out that a good composite cable is OK (I was worried about signal quality at the end).
So I don't have to find a VGA cable...
Finally, it is pretty simple Thank you -Yves.
Message was edited by: ygab

Xi adaptor

Similar Messages

Maybe you are looking for