XI to Xi commuication

Hi all
for xi to xi communication is their any need to create any <b>connection of type https/https, in SM59</b> , between two Xi communication...
Regards
Ashutosh.r

Ashutosh,
What is the adapter you are going to use for the XI to XI communication?
Is it SOAP or HTTP or XI adapter?
For HTTP and XI you can directly give the URL in the adapter itself. There is no need to create the Destination in SM59.
But if needed you can create it in SM59
1. for HTTP adapter --> Destination will be HTTP Connection to an External Server
2. For XI Adapter ---> HTTP destination to a R3 system.
Regards
Bhavesh

Similar Messages

Commuication Channel monitoring for SOAP Adapter

Hi friends,
When i see Sender soap adapter status in Communication channel monitoring.I am getting the status as:
Channel started but Inactive
What does that indicate?
Kindly update what i need to do..

Check these links :
SOAP adapter - Channel started but inactive (case inside)
SOAP Adapter status stay "Channel started but inactive"
it ll be solved by given solutions in these thread like send messages,cache refresh..

Commuication Channel in RWB

Hi Friends,
1. In runtime workbench , when i see adpater status in communication Channel momitoring it shows yellow.
What does that mean?

Hi Karthik,
You can monitor in both the ECC as well as the PI systems. Use the TCode : SXMB_MONI
Refer the following link as well
[Monitoring for Processed XML messages in ABAP Proxy|Monitoring for Processed XML messages in ABAP Proxy]
Regards,
Akshay
Edited by: Akshay Salunke on Aug 28, 2008 11:39 AM

No commuication!

going around in circles and no resolution on this issue.

I'm not surprised!
You've provided no insight in this post about your problem, so how do you expect anyone here to help? Comment yes, but help...
Now - if you're referring to the situation you mention in your earlier post (a mere four minutes before this one, I might add!), then perhaps the same lack of information is the issue.

My question is How to do old 4S to new 5 S to save same into phone but can not do ask someone last night and did not help me as I am deaf and not clear and Please man told me download from computer and I am not understand at all

Yesterday We went to At and T store and they told me to download from old phone to new phone and I am really upset and I got Icloud and prove but part of still in 4S and has not go in 5S and that is biggest problem and no commuication that woman stay follow what she said but still not working so I do not know what else to do my do not understand and I would like to have someone do for us and AT and T store can not do that part so Told me Apple store and I called last night talk to some one on Apple store but told me that no go back to AT and T store so now total confuse and I am not get anywhere so and why they will not do it so therefore I do not think computer that not clear for us because we have no experince in computer program for this so both are deaf and not clear so over 50 years age and so we need face someone to do for us and told us do our self which is total upset us more so because my twins are in Orlando and can not call them because of problem contiunes in heart so I need someone who we can trust and help us. I do have IPAD mini and almost lost my calls to my twins and today I think get back but not 100 % so I am kind upset and who email us or I will have to go Apple Store and see if they know personal.

Open this support document http://support.apple.com/kb/HT2109 print it from the computer and follow the steps there. You need to backup your data from the first device and then restore that to the new device.

Communication between servers on different FIs

Just want to verify communication between UCS servers on same chassis but having active vNICs on different FIs (Diagram attached). I suppose all commuication between server-A & server-B will happen through Layer 2 switch as server-A will generate an ARP request for Server-B, that will be passed over to FI-A and then to L2 switch down to FI-B, where server-B will respond back with it's MAC that will then be passed to Server-A via FI-B to L2 switch to FI-A.I don't expect any traffic between servers A & B be routed via firewall? Is there anything I need to be careful about in this design? Going forward we will have multiple subinterfaces on the firewall for different VLANs and all servers will use Firewall as default gateway.

you may want to look at the throughput of your firewall for server-server traffic in different VLANs. If your L2 switch is 10G but your firewall is only 1G then you could have a potential bottle neck.

Lack of communication from Apple

Given that we are now in the midst of a disasterous release of the new IPhone software, it sure would be nice to see a pinned message at the top of each iPhone discussion saying something like this:
Sorry, folks! We really screwed this up but please be patient and we'll have all your iPhones working as soon as we can.
Is there a corporate policy against such commuication?
John Link

I agree. As someone with fairly limited experience dealing with Apple and hence major software updates, I have been sitting back for some time scratching my head at the tactics they use that end up "training" consumers in weird ways. For example, I think most are now conditioned to buy the next new thing with caution since we all pretty much now expect them to release something better cheaper in about a year.
I've been watching this software update with fascination as well. The rollout strategy was just begging for a disaster. To rollout a major hardware and software upgrade on the same day is ********. Also, why make everyone guess and make assumptions as to when the software update would be released? Why keep 'coming soon" as the date for releasing the 2.0 software on the web (The supposedly point of reference for product information)? Because of this, people were spending time looking for ways to circumvent them, hence those of who updated yesterday from the scrounged file (up and running fine, thank you!).
It's all about COMMUNICATION and organization!

Rfc sender problem(sap r/3 -se37) 'alternativeServiceIdentifier: party/serv

Rfc sender problem: While executing the rfc in sap r/3 system
It is showing abap run time errors are
'alternativeServiceIdentifier: party/service from channel
configuration are not
(i have taken hint from this weblog /people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step)
These are the configuration at sap xi and sap r/3 system
1) SAP XI (ID)
I have created rfc sender commuication channel in I.D.
      Rfc server Parameters->
            A.S.(Gateway)-> server    {sap r/3 server name}
            A.S.S.(Gateway) -> sapgw00
            program id         -> PDPT
     AND RFC Metadata repository parameter
2)SAP R/3 (SM59)
    Rfc destination -> PPPP
    Connection type -> T
    Technical Settings->
         (*) Registered Server Program
      Program ID ->    PDPT
Gate way options
      Gateway host -> server
      gateway service -> sapgw00
Testconnection-> connected
3) testing rfc at sap r/3(se37)
But when i am executing a rfc in sap system
Rfc target system -> PPPP
and some import parameters
and it is showing the error message as
'alternativeServiceIdentifier: party/service from channel
configuration are not '
4)SAP R/3( SMGW)
CONNECTION TO CLIENT FOR PDPT(TP NAME) REGISTER STATUS IS WAITING
Please help me how to solve this problem

Hi,
SAP Note 730870 FAQ: XI 3.0 RfcAdapter Q.no 15
<i>Q 15: Whats wrong when the error message "lookup of alternativeServiceIdentifier via CPA-cache failed" shows up while sending a RFC call to the RfcAdapter?
A: A RFC sender channel is located beneath a service within the Integration Directory. Within this service choose "Service" -> "Adapter-Specific Identifiers". The values in the fields "R/3 System ID" and "Client" has to be maintained with the correct values of the system, that sends the RFC call to the RfcAdapter. It normaly only makes sense to have these values filled for services of type "Business System". If maintained in SLD, this fields will be filled automaticaly for services of type "Business System" and can be updated with the button "Compare with System Landscape Directory".</i>
- Give correct appserver and gateway service details in XI.
- Open the service holding the RFC adapter you are trying to use. On the top menu, goto Service -> Adapter Specific Identifiers..
Regards,
Prateek

Service relocating and failover

Hi all,
I woluf like to use different service name on a 2-nodes RAC to manually control which nodes clients connect to.
I set up:
- a "global service", which is running on both instances
- a "node1" service, which has instance 1 as preferred and instance 2 as available
- a "node2" service, which has instance 2 as preferred and instance 1 as available
So I can choose where to connect.
However, if I stop one instance or if I reboot one one, clients connected to the "global" service are failed over to the surviving node, the service is switched to the surviving available instance, but clients connected to the switched service are not failed over.
How can I correct this situation? I would like to have all clients failing over to the surviving node.
Moreover, when a node restart the service is not failed back to its preferred node.
How can I force this?
A full list of commands used to manage services follows.
thanks for every answer!
andrea
-- create and start aditional services
[oracle@giallo ~]$ srvctl add service -d asr -s asrgiallo -r "asr1" -a "asr2" -P BASIC
[oracle@giallo ~]$ srvctl add service -d asr -s asrrosso -r "asr2" -a "asr1" -P BASIC
[oracle@giallo admin]$ srvctl start service -d asr -s asrgiallo
[oracle@giallo admin]$ srvctl start service -d asr -s asrrosso
-- clients will connect using these tnsnames entreis
ASR_giallo =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = giallo-vip)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = rosso-vip)(PORT = 1521))
(LOAD_BALANCE = yes)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = asrgiallo.noemalife.loc)
ASR_rosso =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = giallo-vip)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = rosso-vip)(PORT = 1521))
(LOAD_BALANCE = yes)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = asrrosso.noemalife.loc)
-- reboot first node
[root@giallo ~]# reboot
-- now clients connected to ASR_giallo are disconnected:
-- every query results in end-of-file on commuication channel
-- check service status
[oracle@giallo ~]$ srvctl status service -d asr -s asrgiallo
Service asrgiallo is running on instance(s) asr2
[oracle@giallo ~]$
[oracle@giallo ~]$ srvctl status service -d asr -s asrrosso
Service asrrosso is running on instance(s) asr2
[oracle@giallo ~]$
-- restart the service to have it back on its preferred node
[oracle@giallo ~]$ srvctl stop service -d asr -s asrgiallo
[oracle@giallo ~]$ srvctl status service -d asr -s asrgiallo
Service asrgiallo is not running.
[oracle@giallo ~]$
[oracle@giallo ~]$ srvctl status service -d asr -s asrrosso
Service asrrosso is running on instance(s) asr2
[oracle@giallo ~]$
[oracle@giallo ~]$ srvctl status database -d asr
Instance asr1 is running on node giallo
Instance asr2 is running on node rosso
[oracle@giallo ~]$ srvctl start service -d asr -s asrgiallo
[oracle@giallo ~]$ srvctl status service -d asr -s asrgiallo
Service asrgiallo is running on instance(s) asr1

I was too optimistic in my previous post.
If I reboot one node (using the "reboot" coomand from command line), everything work as expected: services and sessions are failed over to the surviving node, and I'm really happy about it.
But if I switch off one node (typing "init 0" on the command line) things does not work.
if i do
[root@rosso ~]# init 0
the service is not failed over node giallo:
[oracle@giallo ~] dmesg
ocfs2_dlm: Node 1 leaves domain 850CA09F1D7541CB9D996C55DDEB1488
ocfs2_dlm: Nodes in domain ("850CA09F1D7541CB9D996C55DDEB1488"): 0
ocfs2_dlm: Node 1 leaves domain 90A92BEA986244D78826CEFB57584910
ocfs2_dlm: Nodes in domain ("90A92BEA986244D78826CEFB57584910"): 0
o2net: no longer connected to node rosso (num 1) at 192.168.223.241:7777
tg3: eth1: Link is down.
[oracle@giallo ~]$ srvctl status database -d asr
-- hangs for some time, finally it ends up with:
PRKO-2015 : Error in checking condition of instance on node: giallo
PRKO-2015 : Error in checking condition of instance on node: rosso
-- if I try it againg, it succeedds but ig gives wrong result!!!
[oracle@giallo ~]$ srvctl status database -d asr
Instance asr1 is running on node giallo
Instance asr2 is running on node rosso
So the service asrrosso is "correctly" left on the instance asr2, even if the cluster node hosting this instance is off!
If I look at ${ORA_CRS_HOME}/log/`hostname`/crsd/crsd.log I find:
2008-02-11 17:42:24.054: [ OCRMSG][2724740000]prom_rpc: CLSC send failure..ret code 6
2008-02-11 17:42:24.054: [ OCRMSG][2724740000]prom_rpc: possible OCR retry scenario
[ default][2724740000]caching_retry: Reconfig number mre than max nodes [510]
2008-02-11 17:42:24.055: [ CRSOCR][2724740000]0OCR api procr_set_value failed for key ora!asr!asrgiallo!cs.REASON. OCR error code = 23 OCR error msg: PROC-23: Error in cluster services layer Messaging error [6]
2008-02-11 17:42:24.055: [ CRSOCR][2724740000][PANIC]0Failed to set key: ora!asr!asrgiallo!cs.REASON value: system(File: caaocr.cpp, line: 229)
2008-02-11 17:42:26.594: [ default][3086931648][ENTER]0
Oracle Database 10g CRS Release 10.2.0.3.0 Production Copyright 1996, 2004, Oracle. All rights reserved
2008-02-11 17:42:26.594: [ default][3086931648]0CRS Daemon Starting
2008-02-11 17:42:26.595: [ CRSMAIN][3086931648]0Checking the OCR device
2008-02-11 17:42:26.600: [ CRSMAIN][3086931648]0Connecting to the CSS Daemon
2008-02-11 17:42:27.056: [    CRSD][3086931648]0Daemon Version: 10.2.0.3.0 Active Version: 10.2.0.3.0
2008-02-11 17:42:27.057: [    CRSD][3086931648]0Active Version and Software Version are same
2008-02-11 17:42:27.057: [ CRSMAIN][3086931648]0Initializing OCR
2008-02-11 17:42:27.069: [ OCRRAW][3086931648]proprioo: for disk 0 (/fw/oradata/ASR/OCRFile), id match (1), my id set (1215517508,1251051748) total id sets (1), 1st set (1215517508,1251051748), 2nd set (0,0) my votes (1), total votes (2)
2008-02-11 17:42:27.070: [ OCRRAW][3086931648]proprioo: for disk 1 (/fw/oradata/ASR/OCRFile_mirror), id match (1), my id set (1215517508,1251051748) total id sets (1), 1st set (1215517508,1251051748), 2nd set (0,0) my votes (1), total votes (2)
2008-02-11 17:42:27.076: [ OCRSRV][3086931648]proath_init: pudata retval [12]. Member [2] might have gone down
2008-02-11 17:42:27.076: [ OCRSRV][3086931648]proath_init: Failed to retrieve pubdata. Expect a rcfg
2008-02-11 17:47:43.556: [ OCRMAS][3041979296]th_master:12: I AM THE NEW OCR MASTER at incar 1. Node Number 1
2008-02-11 17:47:43.649: [ OCRRAW][3041979296]proprioo: for disk 0 (/fw/oradata/ASR/OCRFile), id match (1), my id set (1215517508,1251051748) total id sets (1), 1st set (1215517508,1251051748), 2nd set (0,0) my votes (1), total votes (2)
2008-02-11 17:47:43.650: [ OCRRAW][3041979296]proprioo: for disk 1 (/fw/oradata/ASR/OCRFile_mirror), id match (1), my id set (1215517508,1251051748) total id sets (1), 1st set (1215517508,1251051748), 2nd set (0,0) my votes (1), total votes (2)
2008-02-11 17:47:43.873: [ OCRMAS][3041979296]th_master: Deleted ver keys from cache (master)
2008-02-11 17:47:43.966: [    CRSD][3086931648]0ENV Logging level for Module: allcomp 0
2008-02-11 17:47:44.191: [    CRSD][3086931648]0ENV Logging level for Module: default 0
2008-02-11 17:47:44.194: [    CRSD][3086931648]0ENV Logging level for Module: COMMCRS 0
2008-02-11 17:47:44.299: [    CRSD][3086931648]0ENV Logging level for Module: COMMNS 0
2008-02-11 17:47:44.300: [    CRSD][3086931648]0ENV Logging level for Module: CRSUI 0
2008-02-11 17:47:44.302: [    CRSD][3086931648]0ENV Logging level for Module: CRSCOMM 0
2008-02-11 17:47:44.305: [    CRSD][3086931648]0ENV Logging level for Module: CRSRTI 0
2008-02-11 17:47:44.307: [    CRSD][3086931648]0ENV Logging level for Module: CRSMAIN 0
2008-02-11 17:47:44.308: [    CRSD][3086931648]0ENV Logging level for Module: CRSPLACE 0
2008-02-11 17:47:44.310: [    CRSD][3086931648]0ENV Logging level for Module: CRSAPP 0
2008-02-11 17:47:44.311: [    CRSD][3086931648]0ENV Logging level for Module: CRSRES 0
2008-02-11 17:47:44.315: [    CRSD][3086931648]0ENV Logging level for Module: CRSOCR 0
2008-02-11 17:47:44.316: [    CRSD][3086931648]0ENV Logging level for Module: CRSTIMER 0
2008-02-11 17:47:44.318: [    CRSD][3086931648]0ENV Logging level for Module: CRSEVT 0
2008-02-11 17:47:44.319: [    CRSD][3086931648]0ENV Logging level for Module: CRSD 0
2008-02-11 17:47:44.323: [    CRSD][3086931648]0ENV Logging level for Module: CLUCLS 0
2008-02-11 17:47:44.390: [    CRSD][3086931648]0ENV Logging level for Module: OCRRAW 0
2008-02-11 17:47:44.402: [    CRSD][3086931648]0ENV Logging level for Module: OCROSD 0
2008-02-11 17:47:44.404: [    CRSD][3086931648]0ENV Logging level for Module: CSSCLNT 0
2008-02-11 17:47:44.405: [    CRSD][3086931648]0ENV Logging level for Module: OCRAPI 0
2008-02-11 17:47:44.407: [    CRSD][3086931648]0ENV Logging level for Module: OCRUTL 0
2008-02-11 17:47:44.408: [    CRSD][3086931648]0ENV Logging level for Module: OCRMSG 0
2008-02-11 17:47:44.409: [    CRSD][3086931648]0ENV Logging level for Module: OCRCLI 0
2008-02-11 17:47:44.411: [    CRSD][3086931648]0ENV Logging level for Module: OCRCAC 0
2008-02-11 17:47:44.412: [    CRSD][3086931648]0ENV Logging level for Module: OCRSRV 0
2008-02-11 17:47:44.414: [    CRSD][3086931648]0ENV Logging level for Module: OCRMAS 0
2008-02-11 17:47:44.414: [ CRSMAIN][3086931648]0Filename is /opt/oracle/crs/oracle/product/10.2.0/crs/crs/init/giallo.pid
[ clsdmt][2840591264]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=gialloDBG_CRSD))
2008-02-11 17:47:44.752: [ CRSMAIN][3086931648]0Using Authorizer location: /opt/oracle/crs/oracle/product/10.2.0/crs/crs/auth/
2008-02-11 17:47:44.988: [ CRSMAIN][3086931648]0Initializing RTI
2008-02-11 17:47:45.208: [CRSTIMER][2819345312]0Timer Thread Starting.
2008-02-11 17:47:45.229: [ CRSRES][3086931648]0Parameter SECURITY = 1, running in USER Mode
2008-02-11 17:47:45.229: [ CRSMAIN][3086931648]0Initializing EVMMgr
2008-02-11 17:47:47.342: [ CRSMAIN][3086931648]0CRSD locked during state recovery, please wait.
2008-02-11 17:47:48.228: [ CRSRES][3086931648]0ora.giallo.vip check shows ONLINE
2008-02-11 17:47:59.191: [ CRSRES][3086931648]0ora.giallo.gsd check shows ONLINE
2008-02-11 17:48:12.702: [ CRSRES][3086931648]0ora.giallo.ons check shows ONLINE
2008-02-11 17:48:17.166: [ CRSRES][3086931648]0ora.giallo.LISTENER_GIALLO.lsnr check shows ONLINE
2008-02-11 17:48:17.861: [ CRSRES][3086931648]0ora.giallo.ASM1.asm check shows ONLINE
2008-02-11 17:48:22.322: [ CRSRES][3086931648]0ora.asr.db check shows ONLINE
2008-02-11 17:48:25.425: [ CRSRES][3086931648]0ora.asr.asr1.inst check shows ONLINE
2008-02-11 17:48:28.913: [ CRSRES][3086931648]0ora.asr.asrtest.asr1.srv check shows ONLINE
2008-02-11 17:48:30.669: [ CRSEVT][3086931648]0CAAMonitorHandler :: 0:Action Script for resource 'ora.asr.asrgiallo.cs' stdout redirection failed for `/opt/oracle/crs/oracle/product/10.2.0/crs/crs/log/startutKC2Q.stdout` : No such file or directory
2008-02-11 17:48:30.916: [ CRSRES][3086931648]0ora.asr.asrgiallo.cs check shows ONLINE
2008-02-11 17:48:34.592: [ CRSRES][3086931648]0ora.asr.asrgiallo.asr1.srv check shows ONLINE
2008-02-11 17:48:35.300: [ CRSMAIN][3086931648]0CRSD recovered, unlocked.
2008-02-11 17:48:35.305: [ CRSMAIN][3086931648]0QS socket on: (ADDRESS=(PROTOCOL=ipc)(KEY=ora_crsqs))
2008-02-11 17:48:35.363: [ CRSMAIN][3086931648]0CRSD UI socket on: (ADDRESS=(PROTOCOL=ipc)(KEY=CRSD_UI_SOCKET))
2008-02-11 17:48:35.367: [ CRSMAIN][3086931648]0E2E socket on: (ADDRESS=(PROTOCOL=tcp)(HOST=giallo-priv)(PORT=49896))
2008-02-11 17:48:35.367: [ CRSMAIN][3086931648]0Starting Threads
2008-02-11 17:48:35.367: [ CRSMAIN][3086931648]0CRS Daemon Started.
2008-02-11 17:48:35.367: [ CRSMAIN][2754481056]0Starting runCommandServer for (UI = 1, E2E = 0). 0
2008-02-11 17:48:35.367: [ CRSMAIN][2743991200]0Starting runCommandServer for (UI = 1, E2E = 0). 1
What's wrong?

"communication error" reading when trying to print using my canon mp560. How do I print?

I am unable to print. I receive a message stating "commuication error". I am able to print using a non-apple computer so I know that the wireless option is working on the printer. Any suggestions?

Despite being a total newbie, I good the damned thing to work--At least for now.
I first unplugged the airport and then the printer. Plugged them both back in and then went to Canon's site to redownload the drivers. Restarted the Macbook pro and to my astonishment it worked. Again, at least for now.....

Airplay from iPhone/iPad unable to connect half of the time

I have a new 3rd Gen/1080p Apple TV I bought the other day.
I also have a iPhone 4S and a 'new' iPad.
All are running on the latest ios versions, including the iPhone/iPad ios version from yesterday which claims to have fixed some airplay bugs.
The problem is that more then half the time I attempt to use airplay, or display mirroring, it fails. In every case the little icon is always visible on the iPhone/iPad, so there isn't an issue with connectivity. I can try one time and it fails, then a half hour later it works, and then fails again later. When it does fail, I click on the airplay icon, and select Apple TV and it pops back to local display after about 2 seconds.
For Connectivity, the Apple TV is connected via ethernet (I've tried via WiFi also, no difference), and the iPad/iPhone is on WiFi obviously. There aren't many hotspots in the area, indeed I think this is the only one on 5Ghz. Also interference is not an issue.
The router is a Cisco E3000, and I've checked all it's settings and there is nothing that looks like it would interfere. Obviously I've tried turning off the Firewall (which should only be filtering inbound traffic anyway), and there are no issues with host-to-host communication within the LAN anyway - I have a WD TV live and a NAS which get along just fine.
I've never experienced any connectivity issues with the iPad - it's rock solid.
So - can anyone suggest anything that might be wrong?
It's looking like an Apple problem to me. I'm going to see if I can sniff the commuication tonight using Wireshark, but I'd expect it to be encrypted and therefore impossible to see what's happening.

OK, just got my above issue resolved by a Power Outage. Seems all it needed was a full reset of the Servers.
Go figure.

HTTP to ABAP Proxy - Problem with "Current User" parameter

Hi experts,
We have a HTTP to ABAP proxy sceario, where I used an HTTP Destination to connect to the proxy.
We're trying to use the option "Current User" in that destination in order to login to ECC with the same user that in PI adapter plain.
The user exists i both systems, PI and ECC, with the same password.
Checking that parameter we get the following error:
<SAP:Error><SAP:Category>XIServer</SAP:Category><SAP:Code>INTERNAL.UNAUTHORIZED</SAP:Code><SAP:P1>401 </SAP:P1><SAP:P2>Unauthorized</SAP:P2><SAP:P3>(See attachment HTMLError for details)</SAP:P3></SAP:Error>
We think that PI is not getting the password.
Does aybody know how to do this?
Thanks and regards,
LUIS B.

Hi Chirumamilla,
If we put user and password in SM59 (unchecking "Current User") the commuication works without problems.
We don't want to leave a user set there, beacuse we are looking to access to PI with different users and login to ECC with the same user.
Thanks,

EWA GCA for non-ABAP

Dear all,
I've setup the EWA for our SAP Enterprise portal system (non-ABAP), i've already refer to the note 976054 but along the way I am facing some issues, hope anyone here that has such experience or knowledge could share it with me.
Here I would like to seek help on this 2 issue first:
1. EWA GCA Task in SMD
In SMD Scheduler, I check at the EWA GCA task, there is the error :
Execution failed: RemoteFileNotFound See log for details. Next execution in 60 min(s).
com.sap.sup.admin.scheduler.exception.FatalTaskExecutionException: RemoteFileNotFound See log for details
at com.sap.sup.admin.ewa.gca.TdaTask.process(TdaTask.java:511)
at sun.reflect.GeneratedMethodAccessor355.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.smd.server.exec.asio.AsioInvocationHandler$1.call(AsioInvocationHandler.java:87)
at com.sap.smd.server.util.concurrent.FutureResult$1.run(FutureResult.java:90)
at com.sap.smd.server.exec.asio.AsioInvocationHandler$AsioRunner.run(AsioInvocationHandler.java:266)
at com.sap.smd.server.exec.TaskRunner.run(TaskRunner.java:45)
at com.sap.smd.server.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:785)
at java.lang.Thread.run(Thread.java:534)
I not able to find any sapnote or forum that could solve this simillar problem.
*2. runtime error "CREATEDATA_UNKNOWN_TYPE" in ST22*_
Short text
    CREATE DATA: The specified type "/BI0/V0SMD_PE2H2" is no valid data type.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLSMD_FUNC" had to be terminated
    come across a statement that unfortunately cannot be executed
please advise me, as I do not setup any BI client (in solution manager), or using any BI system. How should I correct the error? is BI is a must (either BI client or external BI system) ?
the BI_CONT is 703 release SAPKIBIIP8 0008
please help, thanks in advance!
Edited by: Lay Peng Lee on Sep 17, 2009 3:38 AM
Edited by: Lay Peng Lee on Sep 17, 2009 3:38 AM

Hi Kelly,
BI content is for the reporting purpose and forms the base of the Diagnostics.
By default BI Content is delivered in SAP solution manager- Client 001,. you can use it. You can also have a client copy as per Standard and use it as BI client.
You have to perform the Following activities to use it for Diagnostics:
1) Activate the BI content and perform some Changes including manual activation.
2) Generate some users between clients to aid the commuication between BI and your Production client.
3) Use the BI client as a Backend BI during Diagnostics setup(SMD) and run the configuration Process.
All the above steps forms the aprt of Initial and Basic Configutation in solution manager.
Then you have to perform managed system setup for your component.
Hope this helps.
Kindly revert for any issues.
Thanks,
Jagan

File to Rfc to File in pi7.1

Hiii,,
Iam trying file to rfc to file scenario...when iam montoring sender commuication channel it shows below mentioned error...wat may the issue..help me out
"Delivering the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.af.service.administration.api.cpa.CPAChannelStoppedException: Channel stopped by administrative task.. Setting message to status failed"
With Regards..
Dinesh

Hi,
I checked the namespace its rite...whether i have to check the same namespace in sap system...if yes, where to find it..
I guess your File CC configuration is not correct. Namespace will be your source interface namespace in PI. This is a very basic question and should be searched on SDN / SAP Help before posting here.
Go through this SAP Help ...
http://help.sap.com/saphelp_nw04/Helpdata/EN/e3/94007075cae04f930cc4c034e411e1/content.htm
Regards,
Neetesh

Issue with Linksys Router and Modem with Vonage Device

Hello,
I have a Linksys Router and Cable Modem. Plus I have Vonage for my home phone. I have been having several problems and now, my Vonage phone will not work at all. I have cable internet and my ISP is Cox Commuication. I do not know how to connect my Vonage device with my Router and Modem. People have been giving me advice, but nothing has worked.
Does anyone know how to intergrate all three of these items together? Basically which plug goes where. Currently my phone is not working. The only thing that is in use right now is my linksys cable modem. I have the power cord plugged in, the blue cord from the modem plugged into my laptop, and the cable from the modem to the wall jack. Please help. Thank-You!
Linksys Router: WRT54G version 6
Linksys Cable Modem: BEFCMU10
Vonage (Motorola): VT2143-VD
Message Edited by preshe79 on 03-16-2008 03:56 PM
Message Edited by preshe79 on 03-16-2008 03:58 PM

The router should be online first. Can you get into the router's configuration page?
The box said windows xp or better... So I installed Linux!

XI to Xi commuication

Similar Messages

Maybe you are looking for