XI to XI - XI adapter communication

Hi
   I have the following scenario :
BSysA --> XIA --> XIB --> BSysB
XIA and XIB are my two integration servers with separate SLDs. Both XIA and XIB have been setup as integration servers in sxmb_admin
My aim is to setup a communication between XIA and XIB using XI adapters
In XIA - integration server,  I set up a receiver determination for the msg from BSysA to point to XIB  and a corresponding receiver channel .
I have included XIB as a busines system in SLD of XIA and vice-versa. ( XIA and XIB having roles of business systems in the respective SLDs )
Now when I send a message from BSysA -  it reaches XIA and then gets routed to XIB - in XIB - I get a error message PROXY_NOT_ALLOWED_ON_IS - Proxy calls on the sender or receiver side are not permitted on the IS
Now, I don't understand why XIB cannot be treated as an integration server ( which it is as per definition ) and the message from XIB be forwarded to its logical receiver BSysB ( I set up another receiver determination in XIB to point to BSysB )
( I have only a single client on XIB configured as an integration server )
Any thoughts on what is going wrong here - ? I am sure I am missing a very minor detail here - since I saw another thread which said they have managed a XI to XI communication in a similar fashion.

Karthik,
I know I had pointed the blog by my Colleague to you in your earlier thread.
Get in touch with him and he will certainly be able to help you because he has implemented a real time scenario of XI - XI implementation. Even though he used SOAP adapters, he will surely give you an idea on what the issue with XI adapters might be.
Regards
Bhavesh

Similar Messages

  • Error in Recever Mail Adapter (Communication Channel)

    Hello Experts,
    I am getting below error in recever Adapter Communication Channel. I have given SMTP, XIALL,PLAIN parameters, i have given proper: SMTP://compnay.com & correct user id and password, i browse throug all most all related links.
    Exception caught by adapter framework: java.io.IOException: server does not support PLAIN or LOGIN authentication
    Mail: error occured: com.sap.aii.af.ra.ms.api.RecoverableException: java.io.IOException: server does not support PLAIN or LOGIN authentication
    Delivery of the message to the application using connection Mail_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: java.io.IOException: server does not support PLAIN or LOGIN authentication.
    Thanks,
    Siva

    HI Siva
    Are you trying to send Email from any file send by system or Read by PI and send as Email.
    Please describe your Scenario.
    If your email is generated from the content provided by Integraton engine use Message protocol XI PAYLOAD instead of XIALL.
    Using Authentication you change from Plain to CRAM-MD5. then it might not give any error
    Your URL should be SMTP://mailhost.company.com
    For reference check Help URL
    http://help.sap.com/saphelp_nw04/helpdata/en/23/c093409c663228e10000000a1550b0/frameset.htm
    Thanks
    Gaurav Bhargava

  • Issue on file sender adapter communication channel

    Hi All,
    I have an issue on some of the file sender adapter communication channels .The channels are failing with the error :
    (u201CAttempt to process file failed with com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.xi.swift.ParserException: com.sap.xi.swift.ParserException: Message does not start with character '0x1f'u201D).
    Please let me know the procedure to get this message processed.
    Thanks & Rgards
    Vishnu

    Hi Vishu,
    Find out in what encoding the file is in. for that download Notepad++ and open the file with in.
    In Encoding tab you will see the encoding format.
    1. If its not UTF-8 or ANSI then you should set the correct encoding in Sender File channel.
    2. Check for BOM characters which will not be visible directoly.
    3. Use Notepad++ to convert the content to HEX and check for hidden values. i bet there will be some Encoding BOM in the file which is creating problem while picking the file.
    Since you are using SWIFT module: try to validate the XML file using Altova XML and check weather is correct.
    also ref to this thread:http://scn.sap.com/thread/2134946
    Regards,
    Senthilprakash

  • Soap adapter communication channel problem

    Hi...
      While doing Webservices to file scenario, in component monitoring, the soap adapter communication channel is showing as (in small traiangle inyellow color) channel started but inactive

    Hi leelaratnam,
    Please check that you have only 1 communication channel active and running.
    This happens when more than 1 CC is pointing or waiting for the same incoming data.
    Also perform a dummy activate (i.e. write somthing in description and activate) in your message mapping and communication channel objects in case you are using PI 7.0
    Thanks,
    Varun

  • ALERT MAIL FOR FILE ADAPTER COMMUNICATION CHANNEL ERRORS

    Hi,
    I need to send an alert by mail to a list of configured receivers if any error( Application as wel as System Errors ) occurs in the FILE ADAPTER Communication Channel .
    Please suggest how to do it......
    Regards,
    Sriparna

    Can anything be configured in the communication channel to run a mail unix script if the communication channel is throwing
    error.Other than alert rule can we configure this.
    Why do you intend to use script? Define Alert....create Rule....set parameters using SCOT.....you will get the alert as email (if you need it)
    Can you please help with how do I create this rule specific to File Adapters only ?
    Other than selecting FILE as Adapter Type in RWB --> Alert Rule definition we dont do anything special....this setting should help.
    Regards,
    Abhishek.

  • Sender MDM PI Adapter Communication Channal Problem

    Hi All,
    I am doing (MDM >PI>R/3) Material Master Outbound scenario; while doing syndication process xml file is generated in MDM ready folder.
    But, in ths PI system RWB  Communitation channel monitoring  each time (wheneve new file placed in Ready folder) the MDM PI Adapter Communication Channel has to stop and start it then only the latest file is picking up.
    How to solve this problem without doing start and stop the Communication Channel?
    Plaase, help me to solve this issue.
    Thanks in Advance
    Best Regards
    Mahesh

    Hi Mahesh,
    communication channel is controlled in 3 different methods Manual, Automatic and External (HTTP request)
    so looking at your channel behaviour i suspect it's set to 'Manual'. If so please chage the control to 'Automatic'.
    Manual - You control the communication channel by choosing Start or Stop.
    Automatic - The communication channel is controlled by scheduled availability times.
    I hope this hleps you.
    Regards
    Sekhar

  • Sender Soap Adapter communication channel  error

    Dear Experts,
    When i see Sender soap adapter status in Communication channel monitoring.I am getting the status as:
    "Processing Errors in the Last 50 Minutes"
    Thanx in advance

    Aamir,
    My other interface is working fine by giving the following url:
    http://kpmgvm015:8001/XISOAPAdapter/MessageServlet?channel=:KPMG_AU_ALL:RetrieveOpportunityRecord_SOAP_Sender
    I am not using the propsed url.
    Moreover when  i try to give this url in the browser . It is asking of user id and password.
    I am  giving user as : PIAPPLUSER.It gives message servelet is ok.
    In my communication channel monitoring the corresponsing communication channel:
    RetrieveclientRecord_SOAP_Sender is in Red - Processing Errors In the Last 40 Minutes
    Error meesage in Webclient:
      java.security.AccessControlException: PIAPPLUSER has no permission for accessing binding com.sap.aii.af.service.cpa.Binding@d046043a

  • Adapter Engine NOT in the drop-down list - RFC adapter, Communication Chan

    Hello XI Experts,
    I recently installed IDES (ERP2005) along with XI (NW2004s). I carried out the post installation steps for XI. I set up XI (technical systems, business systems, etc).
    I have started to create an RFC to File XI interface. I have carried out the necessary steps in the Integration Repository and am now setting up the scenario, etc in the Integration Directory.
    I have reached the stage of creating the communication channel of type RFC for the sender system. However, when I do this, the adapter engine is empty i.e. there are no possible entries in the drop-down list. I was expecting to see "Integration Server" as a possible entry.
    Could someone advise me on what I may have missed which leads to this problem?
    Thanks and regards,
    Nicholas.

    Hi,
    You have to get the SWCV from SAP market place.
    Support Packages and Patches -> SAP NetWeaver -> SAP NETWEAVER -> SAP NETWEAVER 2004S -> Entry by Component -> Content PI/XI
    XI CONTENT SAP_BASIS 7.00 / 6.40
    You have to upload the file in the Integration repository
    Best regards
    Omar

  • Problem with File Adapter Communication

    Hi,
    I have got an tab delimted file  as mentioned below
    601252539   5000004  5000004  ZURICH CARGO MCO 00000000005
    606012525   5000005  5000004  MIKEN  INC       00000000003
    I have created proper sender and receiver communication channels with content conversions handled properly.
    In my adapter monitoring I am able to see that my Sender & Receiver Communication channel is showing green and the messages are polled from the flat file in my sender communication channel.But I am unable to receive my messages in the receiver.I have even checked up with MONI,no messages are displayed as per my interface.
    But everything is fine.When I am sending an XML file.
    If there are any mistakes with Content conversion with my tab delimeted file than,some error must be shown in my Adapter monitoring showing my communication channel error.
    But everything is going fine with Sender communication channel.
    There is a major concern here is when I debug the problem, I found out that my content conversion is working fine and the XML document is getting created and When it is going to XI,I have observed that BLANK DOCUMENT is being sent to XI.So,as a thumb rule.SAP XI wont process any BLANK DOCUMENTS.Thats the reason why my receiver is not receing any messages.
    I dont know why,when the content conversion with tab delimted file is converted in XML,When conversion is completed while sending the SAP XI is receiving a blank document.
    Can any one help me.
    Thank You,
    KishoreJ.

    Hi,
    I have just given an example flat file and now even I am giving my content conversion by deleting some,which are not fitting into the page.
    Header.fieldFixedLengths 15,25,8,6,1,8,8,8,15,3,31
    Header.endSeparator      'nl'
    Header.fieldNames        NAME,EXTRD,EXTRT,DBUPD,VOID,UNVD
    Header.keyFieldValue      021309379
    Detail.fieldFixedLengths 18,13,13,35,15,3,8,2,21
    Detail.endSeparator      'nl'
    Detail.fieldNames      BANKN,CHECF,CHECT,ZNME1,AMNT,DECM
    Detail.keyFieldValue      601252539
    Thank You,
    KishoreJ.

  • Testing the JDBC adapter communication channel

    Hi
    I've created an interface which gets the sender payload using a JDBC adapter.
    Basis have installed the JDBC driver for the database where the data resides
    I've configured the communication channel to poll every 10 minutes
    So far nothing appears to be happening
    Can I test the communication channel independantly?
    Is there a procedure to make the communication channel active?
    Is there an admin area where I can see if there is an issue with the communication channel.
    I've checked SMQ1, SMQ2 and SXMB_MONI and there are no messages
    I've also checked runtime workbench => adapter monitoring => communication channels but I get an empty list
    all help will be very much appreciated

    Hi Geoff,
    It is not possible to check only the communication channel but we can check the complete scenario confogured in Integration Directory.
    1. Open ID.
    2. Goto Tools.
    3. Provide the sender and the receiver parameters.
    4. Also provide the payload in the Payload section.
    5. Now, goto Test Configuration
    6. Select Run.
    This shows you, if there are any issues in the configuration.
    Thanks,

  • Steps for  http receiver adapter communication channel

    Hi
    can you please specify steps for http receiver communication channel?
    thanks
    Prasad

    Hi Prasad,
    Here's the documentation for configuring the http adapter in the communication channel(rcve):-
    http://help.sap.com/saphelp_nw04/helpdata/en/43/64dbb0af9f30b4e10000000a11466f/frameset.htm
    Regards,
    Sushumna

  • Adapter communication to DB

    Hi All,
    We would like to know process of communication between Adapter (DB Adapter or EBS Adapter) sitting in BPEL PM and the database.
    We are sending password to PL/SQL sitting in DB using the Adapter. Thus we are interested to know how the data is sent. Is it sent in a readable format or in an encoded format?

    As far as I concerned there is different ways of archieving this.
    First you may encode/decode required fields in PL/SQL in Database (see doc)
    Second you may encode in at messsage level. WS Security is for help. As far as I know OracleBPEL still does not support ws security, use Oracle Web Services Manager for implementinf WS Security.
    Third you may encode all the network traffic at transport level - use SSL. But I am not shure if DB adapter support connect to BPEL over SSL...

  • Problem in configuring the File adapter communication channel in ID

    Dear All ,
    Scenario : <b>IDOC to Xml file</b>
    While configuring File adapter configuration channel , I mentioned the following :
    "File" in Adapter Type
              " File system (NFS) " IN Transport Protocol
              " File " in Message Protocol
    but nothing appears in Adapter Engine ???
    Can anybody help me to solve this problem . What could be the reason .
    Thanks in Advance
    Regards
    Prabhat

    Hi Prabhat
    Please elaborate as to in which format you need the file at the receiver's end.
    also, please go through this link:
    /people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
    Also there may be some error in sending Idocs, to review that, please go through this link:
    http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/frameset.htm
    I hope it helps,
    Thanks & Regards,
    Varun Joshi

  • Receiver JMS Adapter Communication channel Error

    Hi Experts,
    The Error is given below
    Cannot connect because class 'com.ibm.mq.jms.MQQueueConnectionFactory' is missing: ensure that JMS Provider library 'aii_af_jmsproviderlib.sda' contains all required resources.
    when i searched SDN , i found the MQ JMS  Library need to deployed in XI/PI . For clarification check SAP NOTE  1138877 is given .
    What should I do ?
    pls advice
    Regards,
    Jude

    Hello Experts,
    I am encountering the same error that you faced. I am using PI 7.0 and MQ adapter 6.0. I would like to know where to get the following jar files:
    CL3Export.jar
    CL3Nonexport.jar
    com.ibm.mq.jar
    com.ibm.mqjms.jar
    connector.jar
    dhbcore.jar
    rmm.jar
    I know that I am supposed to add the above files to aii_af_jmsproviderlib.sda on the PI server. As I not a basis person, it'll be great if you could direct me to some detailed instructions. I am trying to follow SAPNote: 747601.
    Please correct me if I am wrong.
    Thanks,
    Bhanu.

  • JDBC Adapter Communication Channel error

    I am getting this error for a JDBC Adapter, I waondering if anybody could point me in the right direction.
    I have installed the driver:
    JDBC Driver: oracle.jdbc.driver.OracleDriver
    Connection: jdbc:oracle:thin:@146.146.78.74:1521:ts1
    Error:
    Error when attempting to get processing resources: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: DriverManagerException: Cannot establish connection to URL 'jdbc:oracle:thin:@146.146.78.74:1521:ts1': SQLException: Io exception: The Network Adapter could not establish the connection
    Any help would be appreciated.

    The driver has been deployed into the XI server, I just deployed the testing tool from OSS note 1085539.
    I am still getting this error.
    Exception Occurred : Io exception: The Network Adapter could not establish the connection
    Exception Stack Trace : java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:146)
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:255)
         at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:387)
         at oracle.jdbc.driver.PhysicalConnection.(PhysicalConnection.java:420)
         at oracle.jdbc.driver.T4CConnection.(T4CConnection.java:165)
         at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:35)
         at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:801)
         at java.sql.DriverManager.getConnection(DriverManager.java:559)
         at java.sql.DriverManager.getConnection(DriverManager.java:189)
         at com.sap.util.TestJDBCUtil.testDriverManagerConnect(TestJDBCUtil.java:52)
         at com.sap.tests.TestJDBCConnectionServlet.processRequest(TestJDBCConnectionServlet.java:41)
         at com.sap.tests.TestJDBCConnectionServlet.doPost(TestJDBCConnectionServlet.java:74)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(AccessController.java:215)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Any suggestions?

Maybe you are looking for