XML file for deleting a course site

I tried to use the following XML file to delete a course site. But, it does not work. Could someone point me the right direction? Thanks! JW
1410761825 is the handle of the course I would like to delete.
<?xml version="1.0" encoding="UTF-8"?>
<ITunesUDocument>
<DeleteCourse>
<Handle>1410761825</Handle>
</DeleteCourse>
</ITunesUDocument>

I would suggest checking out and using the XSD when setting up your web services.
This should prevent you from getting some frustration with incorrect tag names.
http://deimos.apple.com/iTunesURequest-1.0.2.xsd
http://deimos.apple.com/iTunesUResponse-1.0.2.xsd

Similar Messages

Help in creation of XML file for IDOC postings

Hi All,
Need help if anyone has knowledge/experience in creating XML files for IDOC processing.
We need to design an input file (in XML format) for creation of IDOCu2019s for purchase Invoices through Interface.
We have an existing input file, which is working correctly. We are trying to modify this existing input file for a new Tax Code (Non-deductible inverse tax liability). This tax code is working fine for manual postings. But, through IDOC, tax postings are not correctly triggering.
Could you please confirm if any one has experience on this, so that I can share more details for resolving.
Thanks & Regards,
Srini

Hello,
you can use CALL TRANSFORMATION id, which will create a exact "print" of the ABAP data into the XML.
If you need to change the structure of XML, you can alter your ABAP structure to match the requirements.
Of course you can create your own XSLT but that is not that easy to describe and nobody will do that for you around here. If you would like to start with XSLT, you´d better start the search.
Regards Otto

XML file for GigE Vision camera

Hello,
I am working on a design of GigE Vision camera. It should be very simple linescan camera. I implemented the whole required GigE Vision register set, can communicate with the camera in MAX. The problem is that I need to creata this XML file for the camera.There is this XML file here:
http://www.emva.org/cms/upload/Standards/GenICam_Downloads/SFNC_Reference_Version_2_0_0_Schema_1_1.x...
What should I do with it? My first version of the camera will have 2 funcions: turn it on and turn it off I am bit confused, because the xml file template has lots of functions, that I don't really need. Should I delete them? Or leave inside with default values? What does minimal configuration XML file need?
Regards,
Linus
Solved!
Go to Solution.

linru wrote:
Thank you very much! Perhaps I was too concentrated on digging through various documents and missed the important info.
And one more question: how does NI software build the *.icd file? By reading XML file? Or by reading registers in my camera?
Both. The XML is processed by the GenApi software component which then translates it to register operations. The XML file thus controls what features are visible based both on the XML file as well as the camera registers (features in the XML may be conditionally available based on the <pIsImplemented< tag). Next, the IMAQdx ICD file contains the subset of features in the XML file that are available and are tagged as <Streamable>, meaning they can be saved to a settings file.
Eric

How to find the unused files for deletion?

After mapping 600 xml files, how does one find the unused files for deletion from the folder? (eaiser and cheaper translations)

iWeb will open any file with the extension .sites2 - it doesn't have to be named "Domain".
See this page for how to open separate Domain files when using Lion/Mountain Lion...
http://www.iwebformusicians.com/iWeb/mountain-lion.html
The above page will also let you know how to find the library folder now that its hidden.

Need to generate a Index xml file for corresponding Report PDF file.

Need to generate a Index xml file for corresponding Report PDF file.
Currently in fusion we are generating a pdf file using given Rtf template and dataModal source through Ess BIPJobType.xml .
This is generating pdf successfully.
As per requirement from Oracle GSI team, they need index xml file of corresponding generated pdf file for their own business scenario.
Please see the following attached sample file .
PDf file : https://kix.oraclecorp.com/KIX/uploads1/Jan-2013/354962/docs/BPA_Print_Trx-_output.pdf
Index file : https://kix.oraclecorp.com/KIX/uploads1/Jan-2013/354962/docs/o39861053.out.idx.txt
In R12 ,
 We are doing this through java API call to FOProcessor and build the pdf. Here is sample snapshot :
 xmlStream = PrintInvoiceThread.generateXML(pCpContext, logFile, outFile, dbCon, list, aLog, debugFlag);
 OADocumentProcessor docProc = new OADocumentProcessor(xmlStream, tmpDir);
 docProc.process();
 PrintInvoiceThread :
 out.println("<?xml version=\"1.0\" encoding=\"UTF-8\" ?>");
 out.print("<xapi:requestset ");
 out.println("<xapi:filesystem output=\"" + outFile.getFileName() + "\"/>");
 out.println("<xapi:indexfile output=\"" + outFile.getFileName() + ".idx\">");
 out.println(" <totalpages>${VAR_TOTAL_PAGES}</totalpages>");
 out.println(" <totaldocuments>${VAR_TOTAL_DOCS}</totaldocuments>");
 out.println("</xapi:indexfile>");
 out.println("<xapi:document output-type=\"pdf\">");
out.println("<xapi:customcontents>");
XMLDocument idxDoc = new XMLDocument();
idxDoc.setEncoding("UTF-8");
((XMLElement)(generator.buildIndexItems(idxDoc, am, row)).getDocumentElement()).print(out);
idxDoc = null;
out.println("</xapi:customcontents>");
 In r12 we have a privilege to use page number variable through oracle.apps.xdo.batch.ControlFile
 public static final String VAR_BEGIN_PAGE = "${VAR_BEGIN_PAGE}";
 public static final String VAR_END_PAGE = "${VAR_END_PAGE}";
 public static final String VAR_TOTAL_DOCS = "${VAR_TOTAL_DOCS}";
 public static final String VAR_TOTAL_PAGES = "${VAR_TOTAL_PAGES}";
Is there any similar java library which do the same thing in fusion .
Note: I checked in the BIP doc http://docs.oracle.com/cd/E21764_01/bi.1111/e18863/javaapis.htm#CIHHDDEH
 Section 7.11.3.2 Invoking Processors with InputStream .
But this is not helping much to me. Is there any other document/view-let which covers these thing .
Appreciate any help/suggestions.
-anjani prasad
I have attached these java file in kixs : https://kix.oraclecorp.com/KIX/display.php?labelId=3755&articleId=354962
PrintInvoiceThread
InvoiceXmlBuilder
Control.java

You can find the steps here.
http://weblogic-wonders.com/weblogic/2009/11/29/plan-xml-usage-for-message-driven-bean/
http://weblogic-wonders.com/weblogic/2009/12/16/invalidation-interval-secs/

How to dpwnload one XML file for each report row

Hi all,
i have a report on the products table with about 1000 rows
desc of table products
product_id varchar (10)
product_desc varchar2 (2000)
I would like to download on the file system an xml file for each row of the report
the nane of each xml file = <product_id>.xml
thanks in advance
km

Hi,
You would probably find it better to search on the PL/SQL forum as this is more their area than Apex.
From what I can see in there (and there are a number of examples that would help you), you need to do something like:
DECLARE
vPATH VARCHAR2(50) := '/DEV';
vFILENAME VARCHAR2(50);
vFILE UTL_FILE.FILE_TYPE;
BEGIN
FOR C IN (SELECT PRODUCT_ID, PRODUCT_DESC FROM PRODUCTS)
LOOP
vFILENAME := C.PRODUCT_ID || '.xml';
vFILE := UTL_FILE.FOPEN(vPATH, vFILENAME, 'W');
UTL_FILE.PUT_LINE(vFILE, '<xdr>');
UTL_FILE.PUT_LINE(vFILE, '<product_id>' || C.PRODUCT_ID || '</product_id>');
UTL_FILE.PUT_LINE(vFILE, '<product_desc>' || C.PRODUCT_DESC || '</product_desc>');
UTL_FILE.PUT_LINE(vFILE, '</xdr>');
UTL_FILE.FCLOSE(vFILE);
END LOOP;
END;I haven't included exception handling etc and you should check on the PL/SQL forum to see if there are better examples!
Andy

How to generate xml-file for SAP Fiori (UI add-on) with Solution Manager 7.0.1?

Hello Guru,
could you please help with my issue with Fiori Installation.
We want to install SAP Fiori Front-End (GW+UI) on the Sandbox system with SAP Netweaver 7.3.1. (SP14)
Gateway component (SAP GW CORE 200 SP10) was installed without any problems.
But I need to install UI-add-on (NW UI Extensions v1.0) and when I try to install it via SAINT, transaction said me that I need to generate xml-file for it (as in General notes for UI add-on mentioned).
But I have Solution Manager 7.0.1 and in MOPZ for this version I do not have option "install Add-on" as it written in Guide for ui add-on installation.
Could you please help me with advice how to generate xml-file for UI add-on installation on SolMan v.7.0.1?
If where is no way, but only to upgrade Solution Manager, maybe somebody could give me xml-file for your system (for NW 731) and I will change it to my needs, I will be very grateful!
Thanks in advance for any help!!!
Bets regards,
Natalia.

Hello Guru,
could you please help with my issue with Fiori Installation.
We want to install SAP Fiori Front-End (GW+UI) on the Sandbox system with SAP Netweaver 7.3.1. (SP14)
Gateway component (SAP GW CORE 200 SP10) was installed without any problems.
But I need to install UI-add-on (NW UI Extensions v1.0) and when I try to install it via SAINT, transaction said me that I need to generate xml-file for it (as in General notes for UI add-on mentioned).
But I have Solution Manager 7.0.1 and in MOPZ for this version I do not have option "install Add-on" as it written in Guide for ui add-on installation.
Could you please help me with advice how to generate xml-file for UI add-on installation on SolMan v.7.0.1?
If where is no way, but only to upgrade Solution Manager, maybe somebody could give me xml-file for your system (for NW 731) and I will change it to my needs, I will be very grateful!
Thanks in advance for any help!!!
Bets regards,
Natalia.

XML file for SEPA Credit transfer

Hi All,
I am working in ECC 6.0. The system was configured to generate XML files for credit transfer as per SEPA guidelines. The files are being created in the application layer. But the line length is being restricted to 255 characters. As per the specifications of a XML file in apllication layer. all information should be contained in one single line.
Secondly the job log for the payment medium creation program contains the below mentioned line among others -
"Incorrect Print Parameter" of message class "0K", message no. 091and message ID I
Can anybody tell me what is going wrong?

HI,
Can you please help me in solving the issue when using the PMW format SEPA_CT.
My co. code currency is EUR and when paying the invoice which is in GBP i am not able to get the currency EUR in the DME file generated by the payment run instead I am getting the currency GBP.
As per the SEPA concept evey payment will be in EUR irrespective of the currency in which the invoice is raised. So please let me know what needs to be done to get the local currency EUR amount the DME file for the payment made against invoice raised in GBP...
Thanks in Advance..
Regards
Sanjeev

Possible elements in the instanceconfig.xml file for presentation services

g'day
Has anyone here come across a list of all the possible elements that can be put in the configuration file for a presentation service, instanceconfig.xml ?
I have found next to nothing in the documentations, about what can be configured there.
What I am specifically after is: How can I change the default listening port for the Presentation Service? The default port is 9710 and I want to move to another port.
Also, how can I move the JavaHost from the default port 9810? I can change the file OracleBI/web/javahost/config/config.xml to reflect the change. Once the JavaHost has been restarted it starts up on the expected port, but the Presentation Service still tries to communicate over RPC to port 9810. How do I configure the presentation service to search for the JavaHost on a non-default port?
I have boiled it down to my original question: What are the possible values I can configure in the instanceconfig.xml file?
Any comments here would be great.
Cheers, 
Borkur

So, I had a little breakthrough here.
I found in the OBIEE deployment guide, page 142:
To change the Presentation Services listener port
1 Open the instanceconfig.xml file for editing.
2 Locate the <WebConfig> element.
3 Within the <WebConfig> tags, create the element <RPC> and assign it the RPC Listener Port
value for the BI Presentation Services instance, as shown in the following example.
<WebConfig>
<ServerInstance>
<RPC>
<Listener port="9715" />
</RPC>
</ServerInstance>
</WebConfig>
NOTE: In the preceding example, the RPC Listener port for the BI Presentation Services instance
has been changed to port 9715 from the default of 9710.
4 Save changes to the file.
This almost works. The RPC element has been deprecated, as was reported in the sawserver.out.log:
The configuration entry 'RPC/Listener' is deprecated. Please refer to the admin guide for more information.
What I then did was to just remove the RPC elements and leaving the Listener element straight under there ServerInstance element. This seems to have solved the problem.
I still have to figure out how to let the Presentation Service know that I have moved the JavaHost to antoher port ...
Cheers,
Borkur

How to create an XML File for Gantt?

Hi Everybody.
I need a Gantt in Web Dynpro ABAP. I need it for the boss to do a Forecast for Vacation. I Hope this is understanding.
Did Anyone know how can i create a XML File for the Gantt at runtime?
Thanks
MSi

Hi Marcus,
the following link is to the JNet/JGantt developer doco
[JNet/JGantt Developer Documentation|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/lw/uuid/f010ec31-9658-2910-3c83-c6e62904eceb]
included in this is the:
[Schema for XML|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/com.sap.km.cm.docs/lw/webdynpro/jnet_jgantt%20developer%20documentation/schema/xml-spy/jnet-schema.html]
You can use this to build XML to represent a gantt like chart.
I did this to build XML to represent employee avaliablity - although we fronted the gantt through WD Java not ABAP - the java applet called is the same (I believe).
Don't underestimate the work required to tweek your data into a decent layout. It took me days.
There may be tools/api to help generate the XML - I don't know of them - I'd look forward to seeing any other replies to this thread from people who have used/built any. An example of a class that generates JNet XML - CL_SPI_UI_JNET - but this does not seem to be a Gantt display.
Cheers,
Chris

How to generate an XML file for an animation of IK armature

Can someone please tell me how to generate an XML file for an animation of IK armature.
I have a 5 keyframe/16 frame animation of a human character made up of a series of moveiclip symbols that is animated with an IK armature. I need the XML information from the animation.
When I go to Commands > Export Motion XML I get the error message "There is more than one object on frame 1" and then nothing happens.
Thank you,
c

I hope that's not the case. I want to write to adobe about it. I think it's a great feature and it functions really well even though it is not a very developed IK tool. My biggest issue with it is ouput options and integration with motion tweens.
I have seen a lot of examples of animators using it online, just no one talked about output. I just feel it hasn't been developed. It can generate a sprite sheet but only for a single pose frame of the animation, and not all the key frames or pose tweens. I find that functionality quite odd, as if adobe just forgot about IK when added in sprite sheets, etc. and the reason it half works is just an accident.

Efficient searching in a large XML file for specific elements

Hi
How can I search in a large XML file for a specific element efficiently (fast and memory savvy?) I have a large (approximately 32MB with about 140,000 main elements) XML file and I have to search through it for specific elements. What stable and production-ready open source tools are available for such tasks? I think PDOM is a solution but I can't find any well-known and stable implementations on the web.
Thanks in advance,
Behrang Saeedzadeh.

The problem with DOM parsers is that the whole document needs to be parsed!
So with large documents this uses up a lot of memory.
I suggest you look at sometthing like a pull parser (Piccolo or MPX1) which is a fast parser that is program driven and not event driven like SAX. This has the advantage of not needing to remember your state between events.
I have used Piccolo to extract events from large xml based log files.
Carl.

Want parse huge xml file for CDATA

HI all
I want to parse hude xml file for getting values of CDATA
can u plz give me sample code for that
here i am attaching the part of my xml file
<initParams>
<param description="simulation mode " name="smtpSimulationMode" passOn="false" required="false" type="bool" varSubstitute="false">
<![CDATA[false]]>
</param>
<param description="full name of smtp host" name="smtpHost" passOn="false" required="true" type="string" varSubstitute="false">
<![CDATA[222222]]>
</param>
<param description="smtpUserName for authentication" name="smtpUserName" passOn="false" required="false" type="string" varSubstitute="false"/>
<param description="smtpUserPassword for authentication" name="smtpUserPassword" passOn="false" required="false" type="string" varSubstitute="false"/>
<param description="ip address for remote server" name="serverId" passOn="false" required="true" type="string" varSubstitute="false">
<![CDATA[1111111]]>
</param>
<param description="location of file on remote server side" name="fileRemoteLocation" passOn="false" required="false" type="string" varSubstitute="false">
<![CDATA[test/]]>
</param>
<param description="user name for authentication" name="userName" passOn="false" required="true" type="string" varSubstitute="false">
<![CDATA[abc]]>
</param>
</initParams>
thanks in advance

There are several Java XML API's available. SAX, JXpath, DOM4J, Xerces, etcetera.

Using a local XML file for parsing - iPhone

Good afternoon everyone. I am trying to create an application for the iPhone that will use an XML file for it's data source. I have been attempting to convert the SeismicXML application from the dev center to use a locally stored file, but to no avail. I have it building and running fine, but no data is appearing. Is there anyone that can give me an example of parsing with a locally stored file? Thanks!

NSString *filePath = [[NSBundle mainBundle] pathForResource:@"myFile" ofType:@"xml"];
NSData *myData = [NSData dataWithContentsOfFile:filePath];
if ( myData ) {
NSXMLParser *parser = [[NSXMLParser alloc] initWithData:myData];
[parser setDelegate:myObject];
[parser setShouldProcessNamespaces:NO];
[parser setShouldReportNamespacePrefixes:NO];
[parser setShouldResolveExternalEntities:NO];
[parser parse];
NSError *parseError = [parser parserError];
if ( parseError && error) {
*error = parseError;
// Do post load activity

Automate creation of web.xml file for tomcat 4.1.29

hi , this is with ref to Tomcat 4.1.29, if i am correct, each Servlet in the application has to be mentioned in the web.xml file for the Tomcat to know about it. Is there any way to automate the creation of web.xml file , depending on the contents of the Servlet folder of the application. Any way to escape from writing each Servlet name in web.xml file.
rc

Hello,
Maybe you should check if you can use Ant tool to do
that. I am not sure if it can help u.
Zeph.
http://ant.apache.org/
It will, specially if used in conjunction with XDoclets :
http://xdoclet.sourceforge.net/
XDoclet has Ant tasks to generate web.xml files.

XML file for deleting a course site

Similar Messages

Maybe you are looking for