XML file or Configuration stack file for Ehp inclusion in Upgradation

Hi,
We are Upgrading 4.7 to Ecc 6.0, we want to include Ehp3 in the Upgradation but we are not able to generate XML or Configuration stack file, can anybody please help me to get XML file or Configuration stack file for Ehp inclusion in Upgradation.
Regards,

Hi Aashish,
can you please provide some further information?
What exactly are you doing in the SAP Solution Manager - Maintenance Optimizer?
I assume that you are at least on SP 15 which is a prerequisite.
Currently a common error is a wrong maintained SMSY: Please check SAP note 1022072 for details.
Best regards,
Christian.

Similar Messages

Select appreciate components on Mopz for XML.Stack file on CD51033594 1-3

Dear Experts !
I have install ERP 6.0 EhP 4, then I use SAPehpi 7.0 tool to update software components from CD51033594 1-3, but in processing, It have error XML.Stack. Please show me how to select right component for XML.Stack from CD51033594 1-3.
Thanks and Best Regards. I hope, you can support for me as soon as possible

Dear Expert !
Fist thank you very much for your answers ! I have installed a ABAP System on ERP 6.0 EhP 4 product with CD source from SAP Market : 51036888_13,51036902,51036767_5. And I need update my system from CD source 51033594 by SAPehpi 7.0 tool. But when processing update by SAPehpi 7.0 tool, It required a XML.Stack file. So how to I can select right XML.Stack file for my system ERP 6.0 EhP 4 on Solution Manager Maintenance Optimizer. Please help me as soon as possible. Thanks and Best Regards !

EHP1 Installation - error during the XML stack file check.

Hello SAP fans and gurus.
I'm updating CRM with EHP1 and I'm stuck at the phase PREP_EXTENSION/SUBMOD_EXTENSION_NEW/SELSTACKXML. Something wrong with the XML stack file. I get this error:
Severe error(s) occured in phase PREP_EXTENSION/SUBMOD_EXTENSION_NEW/SELSTACKXML!
Last error code set: Error reading stack info, return Code = -1, Reason = 'The stack configuration is not valid for the system CRM, inst.-no. 0020652601'
The trouble ticket isn't saying much, but I'll post it anyway:
This trouble ticket was created by SAPehpi on 20110520102342
SAPehpi broke during phase SUBMOD_EXTENSION_NEW/SELSTACKXML in module PREP_EXTENSION / Extension module for start release >= 40B
Error Message: Error reading stack info, return Code = -1, Reason = 'The stack configuration is not valid for the system CRM, inst.-no. 0020652601'
Summary of SAPehpi:
SAPehpi Release:     lmt_001
SAPehpi Version:     40.005
Start Release:          701
Target Release:          701
Summary of host system details:
SID:               CRM
Host:               sapvmcrm
MS Host:          sapvmcrm
GW Host:          sapvmcrm
Start Path:          /usr/sap/CRM/DVEBMGS00/exe
Kernel Path:          /usr/sap/CRM/DVEBMGS00/exe
Summary of operating system details:
OS Type:          Linux X86_64
OS Version:          2.4
Summary of database details:
Database Type:          ada
Database Version:     7.7.07.014
Summary of RFC details:
Host:               sapvmcrm
GW Host:          sapvmcrm
Client:               000
Destination:          CRM
Language:
System No.:          00
There's one problem with the file SAPEXEDB_82-10007250.SAR, which was in the download basket, but is not available for download. I deleted the record in the XML stack file and tried the phase again... with no success. Going through the XML file and checking if the packages have been downloaded is a real pain in the ***.
Anyway, can I somewhere download this file SAPEXEDB_82-10007250.SAR?
Or can anyone help me, how solve this issue different way?
Thanks a lot in advance.
-Stefan

OK, I got it. Wrong installation number. We had to change the installation number in the stack file according the system in the Solution Manager via transaction SMSY. Then it worked like a charm.

EHP Stack file

I have multiple systems with same configuration where I need to update to EHP4 for ERP6 (EHP4 ready systems) on DB2 UDB. (ABAP only; central system)
I know that I can use the same set of SP files downloaded but I'll need to modify my stack file. I want to avoid registering in mopz for this time..
Any clue on how can the stack file be modified ? I have come across two unique system dependent entries in stack file including SID & Hostname ... is there anything else that I should change ?
Thanks,

Hi,
Another best approch to generate consistent EHP stack is, select all systems ( in step - v ), so that for entier landscape you will have only one EHP stack file.
You can use the folloiwng steps to generate EHP stack.
I assumed that your system has been connected to SolMan system.
i)       Use the t-code DSWP
ii)      Select the active solution form the list , say SAP ECC system
iii)     Once you select the solution, click on “operation” than select the “ Maintenance Optimizer”
iv)     Once you select Maintenance Optimizer tab, on the same window, click on “ Create new maintenance transaction” and this will open your default browser ( IE or Firefox )
v)      On the browser you need to select three things and click on continue
-- Solution : Same as step-ii
-- Product Version : ( Say ECC 6.0 )
-- System ( Say Dev or QAS)
vi)      Select “Calculate file automatically” . It will take some time
Rest of the steps are easy – you can select your components, OS, DB etc
Regards,
Dipam

EhP4 Stack file format error in xml

Hi all,
My intention is to Upgrade an sap system 4.6C to Ecc6 including EhP4.
i am running through many problems since now
Here is my newest one:
In solution manager i calculated a stack.xml. After that, i copied the files to the test system which i am upgrading. Now in phase "Stack configuration" i must provide the xml-file.
when i click next, i get an error:
The selected configuration file ("M:InstCds
w70ehp1SMSDXML_P01_20090520113757.307.xml") is not useable.
Reason: "File format error"
Update ....
OK my fault.
in SAP Note Number: 1022704 is the info that in case of start release BELOW 4.6, you cannot use the xml-file, you have to choose the txt-file
Hm .. we have 4.6 which is not BELOW 4.6 but with the txt-file is works ... now i have the next error ...
i tried different files but every time the same error ...
Any idea ?
regards,
Bjoern
Edited by: Björn Trabes on May 20, 2009 4:23 PM

Sorry,
As i wrote
Hm .. we have 4.6 which is not BELOW 4.6 but with the txt-file is works ... now i have the next error ...
is work for the txt-files in this way, that the stack can be read.
It is a little bit confusing, as the german note says: as of 4.6 and lower
but the english note says: lower than 4.6
so there is a little diffrence
But now i have the Problem, that the generated Stack-file from the solution manager is invalid:
"# Error message set: 'Stack file is invalid: keep version w/o component upgrade'"

Stack file generation for upgrade

Hello,
I have to generate Stack.xml file to upgrade the system.
Kindly guide me for stack file generation and SUM toll for upgrading the system.
Thanks and Regards,
Akshay

Hi Akshay,
Kindly guide me for stack file generation and SUM toll for upgrading the system.
Above information is easily available on SCN,please search or elaborate exact issues which you're facing now.Anyways follow SCN doc at Generating Stack For EHP Upgrade
Regards,

File adapter configuration parameter for "hexadecimal conversion"

(File adapter for XI 2.0)
Does anybody know the exact File adapter configuration parameters for reading a file with hexadecimal control characters as seperators. My file has
3 types of seperators - i.e "2F", "05" & "0D2F"
Eg: xml.fieldSeparator= "2F"
When I specify this the file is getting split into fields
at all the seperators in the file. I guess I am not using the right format in my defination ?
Dorai

Is there any special format for reading a file containing hexadecimal control characters?
The file to be processed has hexadecimal separators:
Field Delimiter : '09' or '05'
End of record delimiter: '0A' or '25'
End of Table delimiter : '07' or '2F'
Initially i would like to read the file into XI as it is i.e without any split by using "xml.fieldFixedLengths= "
However, everytime I process the file(with hexadecimal contol characters), I have noticed that my file is getting split, even when I did not specify anything for field separator(i.e when i used fixed field length).
Thanks,
Dorai

Configuring Receiver File Adapter for J2SE

Hi All,
I have a scenario in which i need to convert the IDOC data into a fixed length file.
I did mapping according to the output structure of the file.
My Output file format is as follows...
Document1 document2 document3 etc
Each document contains different fields with different lengths
In XI-FIle adapter we give Recordset structure : Document1,Document2,Document3.
But while configuring Receiver File adapter in J2SE.
There is no option mentioned in J2SE Adapter.
http://saphelp.border-states.com/EN/95/bb623c6369f454e10000000a114084/content.htm
Please throw some light on the same.
Thank You
Regards,
Reehan

as far as i read the document, what i understood is that the J2SE adapter has a limitation.
your XML structure should be as mention in the link;
To convert a table in XML format to pure text format, the document format must be the same as that which is generated by the sender file/FTP adapter in mode FILE2XMBWITHROWCONVERSION (with the default value <row> for the structure) and the sender JDBC adapter. This means that the document structure looks like this:
<resultset>
<row>
<column-name1>column-value</column-name1>
<column-name2>column-value</column-name2>
<column-name3>column-value</column-name3>
</row>
<row>
<column-name1>column-value</column-name1>
<column-name2>column-value</column-name2>
<column-name3>column-value</column-name3>
</row>
</resultset>
This is an example for 3 columns and 2 lines. The number of lines and columns is, of course, unlimited. The XML elements in italics can be defined by the user and the elements of a line must be grouped within an element of type <row> </row>.
So cannot take the recordset structure as we have for the normal File adapter.

IDoc-To-xml File Dynamic Configuration

Hi all.
a few days ago i posted a thread about file-to-file dynamic configuration.
now i have to do the same but with difference that my inbound document is an IDOC, so message_header information cant be use!
i've seen some blog like
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2161. [original link is broken] [original link is broken] [original link is broken] [original link is broken]
ussing file convertion, XI save a plain text document, no xml.
What you sugguest to do?
Rgds
RP

hi RAJEEV GUPTA .
you said do this?
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
//get Key of Directory File name
DynamicConfigurationKey keyF = DynamicConfigurationKey.create( URLFile, "FileName");
//get Key of Directory
DynamicConfigurationKey keyD = DynamicConfigurationKey.create( URLFile, "Directory");
//Replace value of Filename
conf.put(keyF,file);
//Replace value of Directory
conf.put(keyD,dir);
the problem in this case is there no Key, because there no message_header.
do you know the sentence to generate a new key for file name and Directory?
Rgds!
Rp
Message was edited by:
Rodrigo Pertierra

Stack File for JSPM when using Maintenance Optimizer

Hello,
As you know JSPM looks for a stack file when applying a support pack stack. When using maintanance optimizer I see no way to get a stack file. I end up having to do the work twice: once to get the files in maintenance optimizer, and again I have to go to marketplace swdc to choose the files and create the list of downloads again only to save a stack file.
Am I missing something? Is this double work really necessary?

Hello John,
It seems that you are doing double work.
If you use the download type as "SLM" then you have a chance to transfer the XML to SLM. Else if you choose the download type as "Download Manager" then the XML should be created in the EPS/in folder of the Solution Manager system.
You also need to check whether you have applied all the applicable notes for the Solution Manager stack from the note 1122966 and that the BC sets for MOPZ are activated correctly.
Finally check the permissions on the EPS/in folder of Solution Manager to check whether there is a issue with authorizations.
A SLG1 log ( filtered by the username who creates the MOPZ transaction and time at which the transaction was created ) will reveal the errors in the process.
Regards
Amit

Is there a way to configure NTFS file system on an NSS 324 SmartStorage unit. So far I can setup ext 3 or ext 4 but no option for NTFS

Is there a way to configure NTFS file system on an NSS 324 SmartStorage unit. So far I can setup ext 3 or ext 4 but no option for NTFS. This unit should be joining a Windows Server 2008 R2 network and needs to be shared with all users. This unit will replace a File server running Win 2003 SP2.
Message was edited by: Hermann Koster
Thank you very much for your reply. The idea is to decommission the Windows file server which is running Windows Server 2003 SP2 operating system but is not running as a DC but just a member server. All this server is doing is providing file server services so my idea is to replace it with the NSS 324 box. My only concern is that when my NSS joins the domain all my users would be able to see and access network shares transparently, the same way they saw the former W2003 file server. After I transferred the data from File server I will use the same for NSS that was used for file server as well as same IP address and folders path as before.
Any suggestions or advice?
Once again thank you very much for your reply.
Cheers,

The internal HDDs must be formatted in either EXT3 or EXT4 file system because NSS uses Linux OS. This is mainly because the RAM designed to fit with the customized Linux OS's size.
You can connect to an external HDD via a USB or eSATA port. The external HDD's file system can be NTFS, FAT32, AFT or EXT3/4 to be recognized for read/write. You can connect a 2TB USB/eSATA drive connec to the NSS via USB port to format your HDD for NTFS, AFT, FAT32, or EXT3/4 partition.
You can join the NSS to a Windows domainr so all domain users to access NSS. You cannot replace the NSS for the Windows 2003 SP2 server. They are two different products and do different jobs. Windows server is features sets server while the NSS is the files/data server.
Hope that helps!!

Creating an xml file from a playlist - message for iTunes staff

When I created an xml file from a playlist I noticed that in the xml file the track name was merged with the artist name in this manner "I want you - Bob Dylan".
That was hardly a problem as I could easily correct this in the FileMaker Pro environment.
But subsequently I found out, that within iTunes the track name was similarly changed to the same format. Apparently this happened when iTunes created the xml file and inadvertently also changed the track name within iTunes.
It can easily be corrected by entering File/Info, but I had over 10.000 songs in that list and it will take a lot of time. I have to do this, as I created earlier for each song a file path in FileMaker Pro, which are unrecognizable now.
Could you please correct the xml file creating procedure?

I must confess that I can't reproduce this result myself anymore.
I created the xml file in iTunes via File/Library/Export Playlist/xml structure (I translate the Dutch terms loosely) and subsequently I imported the xml file into a Filemaker Pro via File/Import/xml.
The xsl style sheet looks ok.
It looks like a freak of nature.
Still I have the evidence in my iTunes playlist, where I have another 9000 clicks to go to repair the damage.
Let's forget about it, until it happens again.
Thanks for your time.

Can I modify 'Load Files into Stack.jsx' for custom white balance?

I've been wondering whether its possible to change Adobe's 'Load Layers in Stack' script so that it loads RAW files with the white balance adjustments I have made in Camera Raw ('ACR').
At present, the script loads the files as layers with the default ACR (or Lightroom) settings. This means that any white balance adjustments to the file in ACR are ignored and the RAW file is loaded with the WB 'As Shot'.
It IS possible to save new ACR default settings, but this doesn't really help because I don't want the WB to be a constant value. The changes I make in ACR are usually subtle and 'by eye'.
I would like the script to be mindful of these changes when opening the RAW file.. does anyone have any suggestions?
The script is below.
// (c) Copyright 2006. Adobe Systems, Incorporated. All rights reserved.
@@@BUILDINFO@@@ Load Files into Stack.jsx 1.0.0.1
// Load Files into Stack.jsx - does just that.
// BEGIN__HARVEST_EXCEPTION_ZSTRING
<javascriptresource>
<name>$$$/JavaScripts/LoadFilesintoStack/Menu=Load Files into Stack...</name>
</javascriptresource>
// END__HARVEST_EXCEPTION_ZSTRING
// debug level: 0-2 (0:disable, 1:break on error, 2:break at beginning)
//$.level = (Window.version.search("d") != -1) ? 1 : 0; // This chokes bridge
$.level = 0;
// debugger; // launch debugger on next line
// on localized builds we pull the $$$/Strings from a .dat file
$.localize = true;
// Put header files in a "Stack Scripts Only" folder. The "...Only" tells
// PS not to place it in the menu. For that reason, we do -not- localize that
// portion of the folder name.
var g_StackScriptFolderPath = app.path + "/"+ localize("$$$/ScriptingSupport/InstalledScripts=Presets/Scripts") + "/"
 + localize("$$$/private/LoadStack/StackScriptOnly=Stack Scripts Only/");
$.evalFile(g_StackScriptFolderPath + "LatteUI.jsx");
$.evalFile(g_StackScriptFolderPath + "StackSupport.jsx");
$.evalFile(g_StackScriptFolderPath + "CreateImageStack.jsx");
// loadLayers routines
loadLayers = new ImageStackCreator( localize("$$$/AdobePlugin/Shared/LoadStack/Process/Name=Load Layers"),
 localize('$$$/AdobePlugin/Shared/LoadStack/Auto/untitled=Untitled' ) );
// LoadLayers is less restrictive than MergeToHDR
loadLayers.mustBeSameSize = false; // Images' height & width don't need to match
loadLayers.mustBeUnmodifiedRaw = false; // Exposure adjustements in Camera raw are allowed
loadLayers.mustNotBe32Bit = false; // 32 bit images
loadLayers.createSmartObject = false; // If true, option to create smart object is checked.
// Add hooks to read the value of the "Create Smart Object" checkbox
loadLayers.customDialogSetup = function( w )
 w.findControl('_createSO').value = loadLayers.createSmartObject;
 if (! app.featureEnabled( localize( "$$$/private/ExtendedImageStackCreation=ImageStack Creation" ) ))
 w.findControl('_createSO').hide();
loadLayers.customDialogFunction = function( w )
 loadLayers.createSmartObject = w.findControl('_createSO').value;
// Override the default to use "Auto" alignment.
loadLayers.alignStack = function( stackDoc )
 selectAllLayers(stackDoc, 2);
 alignLayersByContent( "Auto" );
loadLayers.stackLayers = function()
 var result, i, stackDoc = null;
 stackDoc = this.loadStackLayers();
 if (! stackDoc)
 return;
 // Nuke the "destination" layer that got created (M2HDR holdover)
 stackDoc.layers[this.pluginName].remove();
 // Stack 'em up.
 if (this.createSmartObject)
 selectAllLayers( stackDoc );
 executeAction( knewPlacedLayerStr, new ActionDescriptor(), DialogModes.NO );
// "Main" execution of Merge to HDR
loadLayers.doInteractiveLoad = function ()
 this.getFilesFromBridgeOrDialog( localize("$$$/private/LoadStack/LoadLayersexv=LoadLayers.exv") );
 if (this.stackElements)
 this.stackLayers();
loadLayers.intoStack = function(filelist, alignFlag)
 if (typeof(alignFlag) == 'boolean')
 loadLayers.useAlignment = alignFlag;
 if (filelist.length < 2)
 alert(localize("$$$/AdobeScripts/Shared/LoadLayers/AtLeast2=At least two files must be selected to create a stack."), this.pluginName, true );
 return;
 var j;
 this.stackElements = new Array();
 for (j in filelist)
 var f = filelist[j];
 this.stackElements.push( new StackElement( (typeof(f) == 'string') ? File(f) : f ) );
 if (this.stackElements.length > 1)
 this.stackLayers();
if (typeof(loadLayersFromScript) == 'undefined')
 loadLayers.doInteractiveLoad();

This is part of the script looks interesting - is there a reference where can I find more hooks? Perhaps there is one that relates to WB?
// LoadLayers is less restrictive than MergeToHDR
loadLayers.mustBeSameSize = false; // Images' height & width don't need to match
loadLayers.mustBeUnmodifiedRaw = false; // Exposure adjustements in Camera raw are allowed
loadLayers.mustNotBe32Bit = false; // 32 bit images
loadLayers.createSmartObject = false; // If true, option to create smart object is checked.
// Add hooks to read the value of the "Create Smart Object" checkbox
loadLayers.customDialogSetup = function( w )

How to get XML file located in SAP directory for SAP XI

In my system, there is a function to create IDOC and store as a xml file in directory of SAP for example u201C/inf/ERQ/XML/u2019 .I want to use this XML file as a input for SAP XI to map and generate output as an IDOC. However, I donu2019t know how to setup integration directory for this scenario. Iu2019m not sure how to access directory in SAP using SAP XI. Any help would be grateful. Thank you.
Thank you expert,
@tom

Hi
Check this PDF
http://www.sap-press.com/downloads/h982_sample_chapter.pdf
search with "Mapping program in SAP XI" in the above link
http://www.sap-press.de/download/dateien/1191/sappress_exchange_infrastructure.pdf
Regards
Pavan

Configure:3955: checking for C compiler default output file name

Hi,
I am trying to configure oracle bsd on AIX and got the below error,
# sh /ldap/db-4.6.21.NC/dist/configure
checking build system type... powerpc-ibm-aix5.3.0.0
checking host system type... powerpc-ibm-aix5.3.0.0
checking if building in the top-level or dist directories... no
checking if --disable-cryptography option specified... no
checking if --disable-hash option specified... no
checking if --disable-mutexsupport option specified... no
checking if --disable-queue option specified... no
checking if --disable-replication option specified... no
checking if --disable-statistics option specified... no
checking if --disable-verify option specified... no
checking if --enable-compat185 option specified... no
checking if --enable-cxx option specified... no
checking if --enable-debug option specified... no
checking if --enable-debug_rop option specified... no
checking if --enable-debug_wop option specified... no
checking if --enable-diagnostic option specified... no
checking if --enable-dump185 option specified... no
checking if --enable-java option specified... no
checking if --enable-mingw option specified... no
checking if --enable-fine_grained_lock_manager option specified... no
checking if --enable-o_direct option specified... no
checking if --enable-posixmutexes option specified... no
checking if --enable-pthread_api option specified... no
checking if --enable-rpc option specified... no
checking if --enable-smallbuild option specified... no
checking if --enable-tcl option specified... no
checking if --enable-test option specified... no
checking if --enable-uimutexes option specified... no
checking if --enable-umrw option specified... no
checking if --with-mutex=MUTEX option specified... no
checking if --with-tcl=DIR option specified... no
checking if --with-uniquename=NAME option specified... no
checking for chmod... chmod
checking for cp... cp
checking for ln... ln
checking for mkdir... mkdir
checking for rm... rm
checking for sh... /usr/bin/sh
checking for a BSD-compatible install... /ldap/db-4.6.21.NC/dist/install-sh -c
checking for C compiler default output file name...
configure: error: C compiler cannot create executables
See `config.log' for more details.
and in config.log,
configure:3955: checking for C compiler default output file name
configure:3982: xlc_r -O2 -D_THREAD_SAFE -Wl,-brtl conftest.c >&5
/ldap/db-4.6.21.NC/dist/configure[3983]: xlc_r: not found
configure:3985: $? = 127
configure:4023: result:
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME "Berkeley DB"
| #define PACKAGE_TARNAME "db-4.6.21"
| #define PACKAGE_VERSION "4.6.21"
| #define PACKAGE_STRING "Berkeley DB 4.6.21"
| #define PACKAGE_BUGREPORT "Oracle Technology Network Berkeley DB forum"
| #define HAVE_UPGRADE_SUPPORT 1
| /* end confdefs.h. */
|
Is this beacase valid c compiler not existing?
# which cc
which: 0652-141 There is no cc in /usr/bin /etc /usr/sbin /usr/ucb /usr/bin/X11 /sbin /usr/java14/jre/bin /usr/java14/bin.
# ksh: which:: not found.
# which c
which: 0652-141 There is no c in /usr/bin /etc /usr/sbin /usr/ucb /usr/bin/X11 /sbin /usr/java14/jre/bin /usr/java14/bin.
Thanks,
Message was edited by:
GK Joe

Joe,
I presume you are trying to build Oracle BDB and not bsd as you have mentioned.
Yes, the error message you are getting is for not having the CC compiler in your system or the path isn't set. Check in the /usr/vac/bin directory if you have one in your system. You might find both xlc and cc compiler there. Set this directory to your path so that 'configure' can see it.
Regards,
-Debsubhra

XML file or Configuration stack file for Ehp inclusion in Upgradation

Similar Messages

Maybe you are looking for