XML Load Document in EXE does not run

LV 8.0 (or 8.01).
This has got to be a trivial installation problem. I wrote a simple VI that reads in an XML file using the XML Load Document vi. It runs like a charm. I then built an exe. Loading the exe results in the following set of errors:
Unable to Locate Component
This application has failed to start because xerces-c_2_2_0.dll was not found. Re-installing the application may fix this problem.
This is then followed by:
LabVIEW: Resource File not found
The file 'DOMUserDefRef.dll' is not a valid LabVIEW file
As it turns out, I just received my 8.01 CDs, so why not? I installed the upgrade, repaired the internet toolkit, sprinkled some distilled water on my keyboard, but the problem did not go away. I then un-installed ALL of LabView, re-installed 8.00, did the hokey pokey, problem is still there.
Am I missing some vital step? If so, I would love to find out where this is documented.
I've reduced the problem to just having the XML Load Document vi connected to the Close Reference VI. See the attached VI.
Thanks,
fredb.
Attachments:
XMLBug.vi ‏13 KB

Hi Casey;
The XML Load Document is part of the XML ToolKit - that comes with the Internet Toolkit from NI. I'm not sure how I can post NI's toolkits here. They are available in the Toolkit CD (part of the Professional Suite). (I tried to get a screen shot in here - can't even do that!).
I'll attach a sample XML Doc I've created. It is created by parsing the LVPROJ file in order to find all the dynamic VI's. I'll build one based on a very simple demo project and attach it here. I was able to parse most of it by using the get tag method, but when I went to use the get value - that would always return a blank string - so I gave up, found an example using the internet toolkit - and off I went.
I do have a workaround (not too elegant) - I create a simple text file each time I write the XML file. I then read the txt file from within the EXE.
Thanks for looking into this. I did get a pointer from my excellent field engineer (Lesley Yu) who suggested I take a look at...
http://digital.ni.com/public.nsf/websearch/694A29D​C644542BC86256E29007CCAC1?OpenDocument
This recommends I explicitly register the dll. I have not had a chance to try this. I did completely uninstall LV and re-install it. That wasn't it.
Thanks again,
fredb.
Attachments:
Demo.zip ‏1 KB

Similar Messages

  • AdobeDownloadAssistant.exe does not run

    AdobeDownloadAssistant.exe does not run on my computer? What can I do? Thanks

    Hi PizarrasyPizarrones,
    Please refer the solution in Troubleshoot Adobe Download Assistant - http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assistant.html
    If you continue to face difficulties you can try initiating a direct download by following the steps listed at http://forums.adobe.com/thread/981369
    Regards,
    Rave

  • PreviewProcessingService.exe does not run in the background

    I just installed VS2013, and SQL2014 RTM, and after that I installed SSDT BI for VS2013 released version (http://www.microsoft.com/en-us/download/details.aspx?id=42313).
    But when I created a SSRS project in VS2013, and then preview the report, there pops up a command windows "C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\PrivateAssemblies\PreviewProcessingService.exe", and it runs in the foreground,
    not like in VS2012 or VS2010, that command does not appear, and it runs as a background process. Besides that, if I close that windows, and preview the report again, it shows the error, "There was no endpoint listening at net.pipe://localhost/PreviewProcessingService5692/ReportProcessing
    that could accept the message. ".
    Anyone has the same issue? how to work it around?
    Hunter

    Hi Katherine,
      Thank you for the suggestions. I tried both of them, for option 1, I can't find any the service named "Net.Pipe Listener Adapter" in the computer services manager. Then I tried the option 2, the "setspn" command was successfully executed, but when
    I previewed the report again, the "PreviewProcessingService.exe
    " window still popped up, and if I close it, preview the report again, there's the error shown in the "Preview" page, below is the output from VS2013,
    Exception rethrown at [0]:
       at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
       at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
       at Microsoft.ReportDesigner.Design.IPreviewProcessing.BeginSetItemPath(String itemPath, AsyncCallback callback, Object asyncState)
       at Microsoft.ReportDesigner.Design.PreviewProcessingClient.BeginSetItemPath(String itemPath, AsyncCallback callback, Object asyncState)
       at Microsoft.ReportDesigner.Design.WCFProcessingHost.<>c__DisplayClass1.<set_ItemContext>b__0(AsyncCallback ac, Object s)
       at Microsoft.ReportDesigner.Design.WCFProcessingHost.<>c__DisplayClass3b.<ExecuteAsyncCall>b__39()
       at Microsoft.ReportDesigner.Design.WCFProcessingHost.ExecuteWcfCall(Action wcfCall)
       at Microsoft.ReportDesigner.Design.WCFProcessingHost.ExecuteAsyncCall(Func`3 beginAction, AsyncCallback endAction)
       at Microsoft.ReportDesigner.Design.WCFProcessingHost.set_ItemContext(PreviewItemContext value)
       at Microsoft.Reporting.WinForms.LocalReport.ChangeReportDefinition(DefinitionSource updatingSourceType, Action changeAction)
       at Microsoft.Reporting.WinForms.LocalReport.set_ReportPath(String value)
       at Microsoft.ReportDesigner.Design.PreviewFrame.RefreshPreview()
    Hunter

  • Setup.exe does not run

    Hi,everyone,
    I have a question about installing oracle 9i on windows 2000.
    I downloaded three zip files and recorded them on CD-Rs and extract them into three different folders on another computer. After the extraction, when I clicked on setup.exe in the first folder, it did run. How can I solve this problem?
    Any help will be highly appreciated.
    thanks
    Joe

    hi to everybody.
    To make you notice if you have this oracle which is not 9i and you apentium 4 Computer than there is a bug of the JRE so you got to download the new realease.

  • Labview 8.5 applicatio​n builder .exe does not run.The same source code runs ok.

    Hi,
    I have an application built in labview 8.5 application builder using windows XP. I have one instrument connected in gpib and one connected to a serial port. The source code runs ok but when I build  an executable of teh same code and try to run it, it doesnt run the instrument connected to the serial port. It does communicate with the gpib port. Any ideas why this would be happening?
    Steven

    Additional to Britoa's reply:  Did you add the serial commuication (drivers) when you built the application?

  • Runtime engine memory increase when .exe is not running.

    Hi,
    I have built a stand alone application that on launch will pop up it's front panel, and wait for the user to click the run button.
    If i look in Task Manager, i see the .exe is present and has memory allocated to it.
    If i do nothing (do not click the run button), and leave the application window open, the memory allocated (as seen in Task Manager) increases (about 3mb over 24 hrs). -note, the .exe is not actually 'running' my code, as the run button has not been clicked.
    1, is this normal?
    2, is there anything i can do to stop it?
    3, is this down to my coding? (-would seem not as my part of the .exe does not run until the run button is clicked by the user?)
    I do not have experience with memory & windows handling of it.
    I understand the concept of a memory 'leak' -increasing memory due to continually incremented arrays etc.
    Note, i am running the Execution Trace Toolkit, and it is enabled in the .exe.
    LV 2011, SP1, WIn XP. (going to upgrade soon, but have held it static as a dev platform...)
    Suggestions welcome...
    Thanks.

    BlueTwo wrote:
    1, is this normal?
    No it is not.  An application needing to click run before it works, is not normal.  Open Microsoft Word, does it run?  Do you need to click a run button?  Other programs do not behave like this and neither should yours.
    That being said I don't think this memory increasing by not running is normal, but I have never seen it and maybe that's because my program is either running or not.  It is never in limbo where it is running but not doing anything.
    Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
    If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

  • I switched on my PC and there was an update for realplayer. Since then firefox will not load. It is running according to Task Manager. I've downloaded a another copy of the programme using IE but whilst it loaded as a programme, does not open a window.

    I switched on my PC and there was an update for realplayer. Since then firefox will not open as a window. It is running according to Task Manager. I've downloaded a another copy of the programme using IE but whilst it loaded as a programme, does not open a window.

    Hi again,
    Helps if I give the correct link ! <br/>The press shift button appears to still work, but the option to start in safe mode from the programs listing of a standard install I do not think exists anymore.
    Safe mode will start from a command line, (or a shortcut) and in some circumstances you may need to enter the full path name on a command or shortcut detailed instructions are at http://kb.mozillazine.org/Safe_mode
    Remember (at least at this stage) do not make changes when you get the options list, just click on the continue button.
    If you think that RealPlayer is causing the problem you could uninstall that for now.
    Firefox recent versions are 3.6 4.0 (and 5.0 in beta). There is some debate as to whether creating new profiles or re-installing Firefox is the simplest method of troubleshooting and solving some of these problems, personally I use multiple profiles and multiple versions of Firefox, and tend to forget the required procedures are less than straightforward. For now at least try [[safe mode]] again.
    * see also Instructions for [[installing a previous version of firefox]]

  • [svn:fx-4.0.0] 13615: fix airframework/build. xml so the en_US _rb does not become corrupt when the other. locales target is run.

    Revision: 13615
    Revision: 13615
    Author:   [email protected]
    Date:     2010-01-18 20:59:14 -0800 (Mon, 18 Jan 2010)
    Log Message:
    fix airframework/build.xml so the en_US _rb does not become corrupt when the other.locales target is run.
    -removed the redundant en_US call in the other.locales target
    -added a clean for locales that will only remove the locale being built before rebuild - not all of the locales
    -add updated dita that does not contain spark references
    QE notes: 
    Doc notes:
    Bugs: no but Pete and I discussed briefly
    Reviewer:
    Tests run: doc and other.locales
    Is noteworthy for integration:
    Modified Paths:
        flex/sdk/branches/4.0.0/frameworks/projects/airframework/build.xml
        flex/sdk/branches/4.0.0/frameworks/projects/airframework/bundles/de_DE/docs/packages.dita
        flex/sdk/branches/4.0.0/frameworks/projects/airframework/bundles/fr_FR/docs/packages.dita
        flex/sdk/branches/4.0.0/frameworks/projects/airframework/bundles/ru_RU/docs/packages.dita
        flex/sdk/branches/4.0.0/frameworks/projects/airframework/bundles/zh_CN/docs/packages.dita

    What kind of projects are they (Struts/JSF/Hibernate)? Does the working project differ in any way with other two apps?
    What exactly is not working? Are they recognized by workshop as Struts/JSF/Hibernate app?
    Please send the .log to [email protected]

  • I downloaded the iCloud installer exe. but the installer does not run?

    I downloaded the iCloud installer exe. but the installer does not run?

    Hi,
    Please also try right-clicking on the installer and '''Run as administrator'''.
    [https://support.mozilla.org/en-US/kb/Installing%20Firefox%20on%20Windows Installation]

  • SSIS Job deployment does not run my .exe but is described as a success

    Hi i have scripted a simple script task in c# to run an exe with the following code
    Process.start(filename.exe);
    i have also tried using the 'Execute Process task' in the SSIS toolbox.
    both methods work when i debug. 
    However when deployed to the SQL server as a job, the jobs are described as a success but my program does not run?!
    The exe file is published from SQL visual studio and the resultant filename is setup.exe which i am trying to run.
    Any help pleasE?
    I am not using any shared file resources, the setup.exe is on my desktop.

    this is all i get
    Message Type
    Message Time
    Message
    Message Source Name
    Subcomponent Name
    Execution Path
    OnPostExecute
    8/22/2014 4:15:09 PM
    Package:Finished, 4:15:09 PM, Elapsed time: 00:00:00.234.
    Package
    \Package
    OnPostExecute
    8/22/2014 4:15:09 PM
    Execute Process Task:Finished, 4:15:09 PM, Elapsed time: 00:00:00.203.
    Execute Process Task
    \Package\Execute Process Task
    OnPostValidate
    8/22/2014 4:15:09 PM
    Execute Process Task:Validation is complete.
    Execute Process Task
    \Package\Execute Process Task
    OnPreExecute
    8/22/2014 4:15:09 PM
    Execute Process Task:Start, 4:15:09 PM.
    Execute Process Task
    \Package\Execute Process Task
    OnPreValidate
    8/22/2014 4:15:09 PM
    Execute Process Task:Validation has started.
    Execute Process Task
    \Package\Execute Process Task
    OnPreExecute
    8/22/2014 4:15:09 PM
    Package:Start, 4:15:09 PM.
    Package
    \Package
    OnPreValidate
    8/22/2014 4:15:09 PM
    Package:Validation has started.
    Package
    \Package
    OnPreValidate
    8/22/2014 4:15:09 PM
    Execute Process Task:Validation has started.
    Execute Process Task
    \Package\Execute Process Task
    OnPostValidate
    8/22/2014 4:15:09 PM
    Execute Process Task:Validation is complete.
    Execute Process Task
    \Package\Execute Process Task
    OnPostValidate
    8/22/2014 4:15:09 PM
    Package:Validation is complete.
    Package
    \Package
    OnInformation
    8/22/2014 4:15:08 PM
    Package:Information: Succeeded in upgrading the package.
    Package
    \Package
    OnInformation
    8/22/2014 4:15:08 PM
    run exe:Information: The Script Task "ST_6ba434db5c5649b7b68ab5fb14977781" has been migrated.
    The package must be saved to retain migration changes.
    run exe
    \Package\run exe
    OnWarning
    8/22/2014 4:15:04 PM
    run exe:Warning: Found SQL Server Integration Services 2012 Script Task "ST_6ba434db5c5649b7b68ab5fb14977781"
    that requires migration!
    run exe
    \Package\run exe

  • Setup.exe file does not run after the download

    So that we may better diagnose DOWNLOAD problems, please provide the following information.
    - Server name East
    - Filename All the disks, 1 through 3, have been downloaded and extracted.
    - Date/Time Aug 7, 2002
    - Browser + Version
    - O/S + Version
    - Error Msg
    I am unable to run the setup.exe file in Disk1 directory. I think we need more information on how to install the server. Please help us ASAP.

    I found out that besides setting the library, I should also set the classpath.
    I tried to set the classpath by setting the environment variable CLASSPATH: path1.jar; path2.jar; path3.jar.
    I also tried to set it with the command prompt:
    CLASSPATH = path1.jar; path2.jar; path3.jar.
    But when double clicking on my .exe file, it still does not run and I still get the NoClassDefFoundError.
    Please help. Thanks!

  • My wife's iPhone 4 opens email documents formatted in office open XML but my iPhone 4 does not. Any insight?

    My wife's iPhone 4 opens email documents formatted in office open XML but my iPhone 4 does not. Any insight?

    Phone started working again for no apparent reason.  We did nothing special.  I am going to leave this open for now as I would like to know what could cause this.

  • I downloaded install_flashplayer16x32_mssd_aaa_aih.exe, but it does not run.

    I downloaded install_flashplayer16x32_mssd_aaa_aih.exe, which seems to be a stub. On my other laptop(windows 7 home premium), it downloaded something else, and then firefox said version 16.0.0.287. But on my older windows 7 starter laptop, it just does not run. Can I just download a complete version?

    Flash Player '''v16.0.0.235 https://www.adobe.com/products/flashplayer/distribution3.html'''
    Shockwave Director '''v12.1.5.155 http://get.adobe.com/shockwave/'''

  • HT1923 Want to uninstall iTunes and reinstall. Unable to remove Bonjour and Apple folders. Error message that they are in use. iPodService.exe is not running.

    Want to uninstall and reinstall iTunes. Ran uninstall for itunes and QuickTime. Unable yo remove Bonjour and Aple program. Error message that they are in use or the folder is open, ipodservice.exe is not running.

    " The feature you are trying to use is on a network resource that is unavailable. I tried to uninstall iTunes, and it would not uninstall. It gave me the following message " The path C:\documents and settings\network service\local settings\application data\apple\apple software update\iTunes.msi cannot be found.
    Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    To install the utility, doubleclick the msicuu2.exe file you downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Program compiles, but does not run

    To: XCode Users <[email protected]>
    From: Brigit Ananya <[email protected]>
    Subject: Program compiles, but does not run
    I am trying to port a Java application from the PC to the Mac. I am using XCode and the program compiles, but it does not run.
    When I try to run the ...app, I get the message that the main class is not specified, etc.
    When I try to run the ...jar, I do not get the message that the main class is not specified, but I do get the message that there is no Manifest section for bouncycastle, etc.
    Here are the detailed messages I get in the Console when I try to run the program:
    When I try to run the ...app, I get the following message:
    1/9/09 7:21:17 AM [0x0-0x8c08c].com.AnanyaSystems.AnanyaCurves[2253] [LaunchRunner Error] No main class specified
    1/9/09 7:21:17 AM [0x0-0x8c08c].com.AnanyaSystems.AnanyaCurves[2253] [JavaAppLauncher Error] CallStaticVoidMethod() threw an exception
    1/9/09 7:21:17 AM [0x0-0x8c08c].com.AnanyaSystems.AnanyaCurves[2253] Exception in thread "main" java.lang.NullPointerException
    1/9/09 7:21:17 AM [0x0-0x8c08c].com.AnanyaSystems.AnanyaCurves[2253] at apple.launcher.LaunchRunner.run(LaunchRunner.java:112)
    1/9/09 7:21:17 AM [0x0-0x8c08c].com.AnanyaSystems.AnanyaCurves[2253] at apple.launcher.LaunchRunner.callMain(LaunchRunner.java:50)
    1/9/09 7:21:17 AM [0x0-0x8c08c].com.AnanyaSystems.AnanyaCurves[2253] at apple.launcher.JavaApplicationLauncher.launch(JavaApplicationLauncher.java:52)
    When I try to run the ...jar, I do get the following message:
    1/9/09 7:22:43 AM [0x0-0x8d08d].com.apple.JarLauncher[2262] at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:374)
    1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] Exception in thread "main"
    1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] java.lang.SecurityException: no manifiest section for signature file entry org/bouncycastle/asn1/DEREnumerated.class
    1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at sun.security.util.SignatureFileVerifier.verifySection(SignatureFileVerifier.java:377)
    1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at sun.security.util.SignatureFileVerifier.processImpl(SignatureFileVerifier.java:231)
    1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at sun.security.util.SignatureFileVerifier.process(SignatureFileVerifier.java:176)
    1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at java.util.jar.JarVerifier.processEntry(JarVerifier.java:233)
    1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at java.util.jar.JarVerifier.update(JarVerifier.java:188)
    1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at java.util.jar.JarFile.initializeVerifier(JarFile.java:325)
    1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at java.util.jar.JarFile.getInputStream(JarFile.java:390)
    1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at sun.misc.URLClassPath$JarLoader$1.getInputStream(URLClassPath.java:620)
    1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at sun.misc.Resource.cachedInputStream(Resource.java:58)
    1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at sun.misc.Resource.getByteBuffer(Resource.java:113)
    1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at java.net.URLClassLoader.defineClass(URLClassLoader.java:249)
    1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
    1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
    1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at java.security.AccessController.doPrivileged(Native Method)
    1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
    1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at java.lang.ClassLoader.loadClass(ClassLoader.java:316)
    1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:280)
    1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
    1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:374)
    I do specify the main class in both, the Manifest file and the Info.plist file, in the correct way, "package.MainClass". Is there another place where I need to specify it?
    Why do I need org/bouncycastle/asn1/DEREnumerated.class, and how would I have to specify it in Manifest?
    I also posted these questions at Mac Programming at forums.macrumors.com and at Xcode-users Mailing List at lists.apple.com/mailman/listinfo, but I did not get any answer.
    Please help! Thanks!

    There was something wrong with my Info.plist file.
    So, here is my corrected Info.plist file:
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
         <key>CFBundleDevelopmentRegion</key>
         <string>English</string>
         <key>CFBundleExecutable</key>
         <string>AnanyaCurves</string>
         <key>CFBundleGetInfoString</key>
         <string></string>
         <key>CFBundleIconFile</key>
         <string>AnanyaCurves.icns</string>
         <key>CFBundleIdentifier</key>
         <string>com.AnanyaSystems.AnanyaCurves</string>
         <key>CFBundleInfoDictionaryVersion</key>
         <string>6.0</string>
         <key>CFBundleName</key>
         <string>AnanyaCurves</string>
         <key>CFBundlePackageType</key>
         <string>APPL</string>
         <key>CFBundleShortVersionString</key>
         <string>0.1</string>
         <key>CFBundleSignature</key>
         <string>ac</string>
         <key>CFBundleVersion</key>
         <string>0.1</string>
         <key>Java</key>
         <dict>
              <key>JMVersion<key>
              <string>1.4+</string>
              <key>MainClass</key>
              <string>AnanyaCurves</string>
              <key>VMOptions</key>
              <string>-Xmx512m</string>
              <key>Properties</key>
              <dict>
                   <key>apple.laf.useScreenMenuBar</key>
                   <string>true</string>
                   <key>apple.awt.showGrowBox</key>
          <string>true</string>
              </dict>
         </dict>
    </dict>
    </plist>Ok, so now I can at least run the AnanyaCurves.jar file by double-clicking on it.
    However, I still cannot run the AnanyaCurves.app file. When I double-click on it, I get the following message in the Console:
    1/11/09 5:12:26 PM [0x0-0x67067].com.apple.JarLauncher[1128]  at ananyacurves.AnanyaCurves.main(AnanyaCurves.java:1961)
    1/11/09 5:13:11 PM [0x0-0x6a06a].com.AnanyaSystems.AnanyaCurves[1137] [JavaAppLauncher Error] CFBundleCopyResourceURL() failed loading MRJApp.properties file
    1/11/09 5:13:11 PM [0x0-0x6a06a].com.AnanyaSystems.AnanyaCurves[1137] [LaunchRunner Error] No main class specified
    1/11/09 5:13:11 PM [0x0-0x6a06a].com.AnanyaSystems.AnanyaCurves[1137] [JavaAppLauncher Error] CallStaticVoidMethod() threw an exception
    1/11/09 5:13:11 PM [0x0-0x6a06a].com.AnanyaSystems.AnanyaCurves[1137] Exception in thread "main" java.lang.NullPointerException
    1/11/09 5:13:11 PM [0x0-0x6a06a].com.AnanyaSystems.AnanyaCurves[1137]  at apple.launcher.LaunchRunner.run(LaunchRunner.java:112)
    1/11/09 5:13:11 PM [0x0-0x6a06a].com.AnanyaSystems.AnanyaCurves[1137]  at apple.launcher.LaunchRunner.callMain(LaunchRunner.java:50)
    1/11/09 5:13:11 PM [0x0-0x6a06a].com.AnanyaSystems.AnanyaCurves[1137]  at apple.launcher.JavaApplicationLauncher.main(JavaApplicationLauncher.java:61)Why is it looking for the MRJApp.properties file? Isn't this outdated? Shouldn't it look for the Info.plist file? I do not have a MRJApp.properties file.
    Also, in the Run menu of my XCode project, Go, Run, and Debug are disabled, but perhaps this has to do with not being able to run the AnanyaCurves.app file.
    Thanks for your time! I really appreciate any help you can give me!

Maybe you are looking for