XML Query works on one database and not working on others with errLPX-00241

I have one query as below
SELECT EXTRACTVALUE
(VALUE (xml_node),
'/inspectionActivityArtifact/ns2:landfillTypes/ns2:type[position()=1]',
'xmlns:ns2="http://dwm.sw.xmlNamespace/InspectionActivity"'
) AS TEST
FROM artifacts a,TABLE (XMLSEQUENCE ((XMLTYPE (NVL (artifact_data, '<empty></empty>'))))) xml_node
this works well on other databases but not working on one database. Everything is same configuration and OS and everything.
I can work on other XML parsing which is working fine but not this query.
Any idea ?
Viral Dave

post versions and patch levels for both databases eg 10.2.0.1.0 and the error message you are getting.

Similar Messages

Auto To working for one material and not working for other material

Hi,
Hope everybody is doing fine.
I have configured the auto TO. Its working fine for one material and not working for the other material. I checked the material master and wm 1,2 views have the same fileds / values. What could be wrong?
I didn't setup the back ground processing job. Is that is affecting it?
thanks for any help.
regrads,
KHAN

Thnaks,
You are right but then what could be wrong? Its working for one material and not working for otehr material? Any clue?
Appreciate your time charlie

I have 2 ipad 2s. On the newer one I can log in and update to IOS 5 with no problem. On the older one I get the message "Your Apple ID has been disabled." Why does it work on one ipad and not on the other?

I have 2 ipad 2s. On the newer one I could log in and update to IOS 5 withno problem. On the older one I get the message "Your Apple ID has been disabled." No other explanation. Why can I log in on one ipad and I'm disabled on the other?

Well, I spoke too soon. Yes, I'm using the same account on both iPads, but I just changed my password for the umpteenth time and now I get the disabled message on both iPads. Just yesterday I was able to upgrade one to IOS 5 but got the error message on the other. I'm getting more confused by the minute.

HELP!! WRT54G2 works for one computer, but not for the other

I have a WRT54G2 and it is connected to 2 computers. The internet works in one computer, but not on the other. The tech support said i needed to configure it or firmware or something like that. But my product is out of warranty and I really need the internet on the other computer as well. Please Help!!!

As your one computer is working fine then there is no problem with the router so far...
The computer which is not working...check the IP Address on that...
Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway...
IP Address should be 192.168.1.x, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1 (assuming your router is 192.168.1.1)...
If you get the above mentioned IP Address, Subnet and Gateway Address then you should ping the Gateway, type ping 192.168.1.1 and press Enter...If it gives you request timed out then disable any firewalls, security softwares on the computer...
If you get 4 replies then type ping 4.2.2.2 and press Enter, if you get request timed out, then you need to upgrade your router's firmware...If you get 4 replies then type ping yahoo.com and press Enter...If you get replies for Yahoo then you should get the Internet after adjusting the browser settings...
Adjusting Browser Settings : Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on O.k...Close the IE and re-open it...
If yahoo times out then provide static DNS on your LAN Connection...
Click on the Start button >>> Settings >>> Control Panel >>>Network Connections- Right click on the icon for Local Area Connection and go to properties- On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button- Select 'Use the Following DNS Settings' Preferred DNS 4.2.2.2 Alternate DNS - 192.168.1.1>>Click on Ok button to Save and Click on "Close" on main Properties window...You should be able to go online...

Outlook 2011 works on 1 network and not on the other

Hello guys,
I just purchased a Macbook Air and MS Office 2011 for Mac. I setup the computer while I was at work (using a wireless network) and was able to get all my emails in perfect order.
However, once I got home (on my home wireless network) when I hit Send/Receive, I get the "Authentication Failed Error 17900" message.
I must add that I have 5 different accounts setup, 4 are my personal domains and one is Gmail. Gmail works fine on outlook both from my office and home.
I tried changing many settings in Outlook, but nothing seems to work. I'm not really good with these things, but my logic tells me that if everything works in the office and not at home, it must have something to do with my router at home! Could this be the case? Can anyone help me please? My office is an hour away and I hate to go there just to check or send emails.
Thanks in advance for your help.

Hi,
Thanks for taking the time to help me out.
What I did was, I connected my other laptop directly to the internet cable, and everything seemed to be working fine (I had the same issue on my windows laptop)
So, I jumped to the local Apple Store and picked up an aiport extreme and voila! everything runs smooth now
Thanks again, I appreciate your help.

GL security works for one report and not for other report.

Hi everybody,
We have setup GL security and for our discoverer reports we are calling
APPS.GL_SECURITY_PKG.VALIDATE_ACCESS( sl.SET_OF_BOOKS_ID,gl.CODE_COMBINATION_ID ) = 'TRUE' in the query.
Now among 3 reports, 2 are working fine but one report is not showing any data if i use the above condition.
Hint: That particular report is based on a Materialized view.
Any ideas??
Thank you
--Kumar

Hi Rod,
Thanks for your reply but when i try to use the where
condition in the folder in Admin, its not recognizing the Apps.GL_SECURITY_PKG.VALIDATE_ACCESS....
Any Suggestion on this?
Thank you
--Kumar

IMessage works in one network and not another...

Since I installed it I couldn't get iMessage Beta to work on my Mac at home. When I used it at work today, it worked perfectly. But now I'm back home and can't get it to work. Factime isn't working either. What's going on?

Hi,
In System Preferences <> Network > Advanced Button > DNS tab add the DNS server 8.8.8.8 (it's a Google Public one)
It seems some DNS servers are not working well with this.
10:36 PM Tuesday; February 28, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

c:set works in one page and not another.. rediculous problem

Hi all,
im having one hell of a strange problem..
i have this bit of code on one page..
profile_body.jsp
<jsp:useBean id="user" scope="request" beanName="com.insaini.publogs.business.UserBean" type="com.insaini.publogs.business.ProfileInterface" />
<jsp:setProperty name="user" property="user" value="<%=request.getRemoteUser()%>" />
<c:set value="${user.profile}" var="profile" />and i have this in my editProfile_body.jsp
<jsp:useBean id="location" scope="request" beanName="com.insaini.publogs.business.LocationBean" type="com.insaini.publogs.struts.listeners.LocationListener" />
<jsp:useBean id="org" scope="request" beanName="com.insaini.publogs.business.OrganizationBean" type="com.insaini.publogs.struts.listeners.OrganizationListener" />
<jsp:useBean id="user" scope="request" beanName="com.insaini.publogs.business.UserBean" type="com.insaini.publogs.business.ProfileInterface" />
<jsp:setProperty name="user" property="user" value="<%=request.getRemoteUser()%>" />
<c:set value="${user.profile}" var="profile" />the profile_body.jsp loads fine.. but the editProfile_body.jsp does not load at all and its throwing this error..
An error occurred at line: 17 in the jsp file: /jsp/includes/editProfile_body.jsp
Generated servlet error:
org.apache cannot be resolved or is not a field
where line 17 points to
<jsp:setProperty name="user" property="user" value="<%=request.getRemoteUser()%>" />
this makes absolutely no sense since this exact same line works in the profile_body.jsp..
any ideas?

I think the problem is that you have an object in scope that has the name "org". Then, somewhere in the Java Code generated by the offending jsp:setProperty tag, there is a line that looks like:
xxx = org.apache...
What ends up happening is Java is looking in the object you have named org for a public (or otherwise visible) member named apache, and not finding it.
This is a naming conflict, and gets resolved by renaming the <jsp:useBean id="org" object to something else (preferrably something other name org, com, net, or any other package name your system might have).

MultiServer Monitor Works on one PC and not another??

Super strange, but I have two PCs at my desk. On one of them I can log into a CF 8 server and bring up the MultiServer Monitor and add all my CF 8 Servers and it works great. On my other PC (the one I setup JUST to display the Monitor all day) it always says Permission Denied for all the servers. The server I connect to and the credentials used are identical in both cases. Also, both PCs are on the same subnet (not on the same subnet as the servers). Anyone got any ideas?? Notice that in both screen shots (one from each PCs browser) the URL is the same and I've keyed the username/password used on the failing workstation more than a dozen times to make sure I'm keying it correctly. I've even copied and pasted it so I know it is correct. Thanks for any input.

When you upgraded, did you remove the first install? I can't think of a reason off-hand, but have screwed up java before, and an update file may not overwrite the messed uyp part. just a thought, tah.
--Jon Baumann

Prgrmatic viewlink setting for hgrid is working for one level and not remai

Hi All,
I have create 2 VO objects dynamicaly and created 2 VL's dynamically .I have a static HGrid.and iam setting viewlinks dynamically.It is working for 1 level but not another leve..For Example.. Grid id displaying projects to Tasks but not tasks to subtasks.
here is my code
public void createViewLink(){
OADBTransaction dbTransaction=getOADBTransaction();
OAViewObject obj = (OAViewObject)this.findViewObject("TestProjects1VO1");
OAViewObject obj1 = (OAViewObject)this.findViewObject("TestTasks1VO1");
AttributeDef[] prjLinkAttrs = new AttributeDef[] { obj.findAttributeDef("ProjectId") };
AttributeDef[] taskLinkAttrs = new AttributeDef[] { obj1.findAttributeDef("ProjectId") };
ViewLink vl = createViewLinkBetweenViewObjects("TestPrjToTestTasksVL","TestPrjToTasksAcc",
obj,prjLinkAttrs,obj1,taskLinkAttrs,null);
//OAViewObject obj3 = (OAViewObject)this.findViewObject("TestTasks1VO1");
OAViewObject obj2 = (OAViewObject)this.findViewObject("TestRecTasks1VO1");
AttributeDef[] taskAttrs = new AttributeDef[] { obj1.findAttributeDef("TaskId") };
AttributeDef[] parentTaskAttrs = new AttributeDef[] { obj2.findAttributeDef("ParentTaskId") };
ViewLink vl1 = createViewLinkBetweenViewObjects("TaskToTestTasksVL","TaskToTasksAcc",
obj1,taskAttrs,obj2,parentTaskAttrs,null);
OAHGridBean hgrid=(OAHGridBean)webBean.findChildRecursive("HGridRN");
OAHGridHierarchyBean hgridHierarchy = (OAHGridHierarchyBean)hgrid.findChildRecursive("TreeRN");
OATreeLevelBean treeChild = (OATreeLevelBean)hgridHierarchy.findChildRecursive("TreeRN");
OAWebBean nodeDef1 = (OAWebBean)treeChild.findChildRecursive("nodeDef1");
nodeDef1.setViewUsageName("TestProjects1VO1");
nodeDef1.setViewAttributeName("ProjectName");
OATreeChildBean childNode1 = (OATreeChildBean)treeChild.findChildRecursive("childNode1");
childNode1.setAttributeValue(VIEW_LINK_NAME,"TestPrjToTestTasksVL");
childNode1.setAttributeValue(VL_ACCESSOR_NAME_ATTR,"TestPrjToTasksAcc");
OAWebBean nodeDef2 = (OAWebBean)childNode1.findIndexedChild(childNode1,"nodeDef2");
nodeDef2.setAttributeValue(VIEW_USAGE_NAME, "TestTasks1VO1");
nodeDef2.setAttributeValue(VIEW_ATTRIBUTE_NAME,"TaskName");
%%%%%%%%%%%%%%%Till Here grid is getting data%%%%%%%%%%%%
This node is not getting data............i.e sub tasks are not getting data
OATreeChildBean childNode2 = (OATreeChildBean)childNode1.findIndexedChildRecursive("childNode2");
childNode2.setAttributeValue(VIEW_LINK_NAME,"TaskToTestTasksVL1");
childNode2.setAttributeValue(VL_ACCESSOR_NAME_ATTR,"TaskToTasksAcc");
OAWebBean nodeDef3 = (OAWebBean)childNode2.findIndexedChild(childNode2,"nodeDef3");
nodeDef3.setAttributeValue(VIEW_USAGE_NAME, "TestRecTasks1VO1");
nodeDef3.setAttributeValue(VIEW_ATTRIBUTE_NAME,"TaskName");
Please help me .. ihave spent my whole daya on this issue.
Thanks
Soujanya

Sure Sumit.
OADBTransaction dbTransaction=getOADBTransaction();
OAViewObject obj = (OAViewObject)this.findViewObject("TestProjects1VO1");
OAViewObject obj1 = (OAViewObject)this.findViewObject("TestTasks1VO1");
OAViewObject obj2 = (OAViewObject)this.findViewObject("TestRecTasks1VO1");
// OAViewObject obj3 = (OAViewObject)this.findViewObject("RecTasks1VO1");
AttributeDef[] prjLinkAttrs = new AttributeDef[] { obj.findAttributeDef("ProjectId") };
AttributeDef[] taskLinkAttrs = new AttributeDef[] { obj1.findAttributeDef("ProjectId") };
ViewLink vl = createViewLinkBetweenViewObjects("TestPrjToTestTasksVL","TestPrjToTasksAcc",
obj,prjLinkAttrs,obj1,taskLinkAttrs,null);
AttributeDef[] taskAttrs = new AttributeDef[] { obj1.findAttributeDef("TaskId") };
AttributeDef[] parentTaskAttrs = new AttributeDef[] { obj2.findAttributeDef("ParentTaskId") };
*************This cide was missing ...********************************
/* Retrieve the first row of the master rowset */
Row firstDept = obj.first();
/* Get iterator over details collection via the view link accessor attribute */
RowSetIterator empsInDeptRowSet = (RowSetIterator)firstDept.getAttribute("TestPrjToTasksAcc");
/* Get view object created by the framework to handle view link traversal */
ViewObject viewObjectForAccessorRowSet = empsInDeptRowSet.getRowSet().getViewObject();
/* Now, create the 2nd-level detail between this view object, and reports */
*************This cide was missing ...********************************
ViewLink vl1 = createViewLinkBetweenViewObjects("TaskToTestTasksVL","TaskToTasksAcc",
viewObjectForAccessorRowSet ,taskAttrs,obj2,parentTaskAttrs,null);
I the above vl1 i gave obj1 before .. that was the difference...BAsically using the accessor ... if we give as source for next levevl .. it worked.
Both ViewLinks were separate and now there is a link ............ :)
Now iam facing problem for recursion ......... :)
Soujanya

PO approval hierarchy working on one user and not on other

Hi all,
I am using an approval hierarchy with one preparer and one approver for Purchase order and requisition.
User A is preparer and User B approver.
Requisition hierarchy is doing fine but the Purchase Order Hierarchy gives this error on forewarding the PO..:: " PO Approval Top Process : Error, Wait for Concurrent Programme"
If i assign a different user to this Preparer, the process works fine.
What am i doing worng or what issue am i over looking.
Thanks in Advance.

Found the solution.
Apperently on this installation, my preset named RegularExport should be found with name [RegularExport].
Strange that this works on on installation.

How can I fix my iSight settings when it works on one account and not the other?

iSight continually crashes third party applications. I've checked another account on my MBP, and iSight works on different accounts. What settings can I troubleshoot on the account?
Thank you!

Although the documentation says you can copy Time Machine backups in the Finder, it's very slow and sometimes doesn't work at all.
Launch Disk Utility, open the built-in help, and search for the term "Duplicate." Follow the instructions. All existing data on the destination volume will be erased. That shouldn't be a problem, because you don't want to mix backup and non-backup data on the same drive anyway. Turn Time Machine OFF in its preference pane while copying the volume.

Audio chat works on one machine, but not on the other!

First up, my setup:
Comcast Cable Modem -> Linksys Router -> iMac (Core2Duo), PowerBook (G4), Vonage
Both systems running OS X 10.4.10. Both systems are connected through their Airport cards (ethernet cables are pulled) to the router.
To better debug the problem I turned the Firewall and LittleSnitch off on both systems.
The router's firewall is turned off as well.
Port forwarding is also checked, and the PowerBook is not even listed having any ports forwarded at all (that's the one iChat audio chat works).
There must be something blocking the iMac... but I can't seem to figure it out. Any help greatly appreciated!
Here the error message when trying to start a audio chat on the iMac:
Date/Time: 2007-10-03 21:53:13.057 -0700
OS Version: 10.4.10 (Build 8R2232)
Report Version: 4
iChat Connection Log:
AVChat started with ID 996873621.
blafusel13: State change from AVChatNoState to AVChatStateWaiting.
0x1763daf0: State change from AVChatNoState to AVChatStateInvited.
0x1763daf0: State change from AVChatStateInvited to AVChatStateConnecting.
blafusel13: State change from AVChatStateWaiting to AVChatStateConnecting.
0x1763daf0: State change from AVChatStateConnecting to AVChatStateEnded.
Chat ended with error -22
blafusel13: State change from AVChatStateConnecting to AVChatStateEnded.
Chat ended with error -22
Video Conference Error Report:
@:0 type=4 (00000000/0)
[VCBANDWIDTH_DETECTIONFAILURE]
[20]
@SIP/Transport.c:121 type=4 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP m.0;branch=z9hG4bK21ebc40938e66ac3
To: "u0" <sip:[email protected]>;tag=999461336
From: "blafusel13" <sip:[email protected]>;tag=950727899
Call-ID: 90351360-7235-11dc-9ae6-fc6fa15013c4@lip
CSeq: 3 NOTIFY
User-Agent: Viceroy 1.2
Content-Length: 0
@SIP/Transport.c:121 type=4 (00000000/0)
[BYE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP u0en0.0;branch=z9hG4bK294ea2d35c1d2655
Max-Forwards: 70
To: "blafusel13" <sip:[email protected]>;tag=950727899
From: "u0" <sip:[email protected]>;tag=999461336
Call-ID: 90351360-7235-11dc-9ae6-fc6fa15013c4@lip
CSeq: 2 BYE
User-Agent: Viceroy 1.2
Content-Length: 0
@SIP/Transport.c:121 type=4 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP m.0;branch=z9hG4bK6a2609544cbcf67a
To: "u0" <sip:[email protected]>;tag=999461336
From: "blafusel13" <sip:[email protected]>;tag=950727899
Call-ID: 90351360-7235-11dc-9ae6-fc6fa15013c4@lip
CSeq: 2 NOTIFY
User-Agent: Viceroy 1.2
Content-Length: 0
@SIP/Transport.c:121 type=4 (00000000/0)
[SUBSCRIBE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP u0en0.0;branch=z9hG4bK063add5400ad6c74
Max-Forwards: 70
To: "blafusel13" <sip:[email protected]>;tag=950727899
From: "u0" <sip:[email protected]>;tag=999461336
Call-ID: 90351360-7235-11dc-9ae6-fc6fa15013c4@lip
CSeq: 1 SUBSCRIBE
Contact: <sip:[email protected]>
Event: conference
Expires: 3600
User-Agent: Viceroy 1.2
Content-Length: 0
@SIP/Transport.c:121 type=4 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP m.0;branch=z9hG4bK106e5ff018690da9
To: "u0" <sip:[email protected]>;tag=999461336
From: "blafusel13" <sip:[email protected]>;tag=950727899
Call-ID: 90351360-7235-11dc-9ae6-fc6fa15013c4@lip
CSeq: 1 INVITE
Contact: <sip:[email protected]>
User-Agent: Viceroy 1.2
Content-Type: application/sdp
Content-Length: 397
[v=0
o=vcauto2 0 0 IN IP4 u0en0.0
s=blafusel13
c=IN IP4 u0en0.0
b=AS:2147483647
t=0 0
a=hwi:1056:2:2000
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 16384 RTP/AVP 12
a=rtcp:16385
a=rtpID:-66179448
m=video 16384 RTP/AVP 126
a=rtcp:16385
a=rtpmap:126 X-H264
a=RTCP:AUDIO 16385 VIDEO 16385
a=fmtp:126 imagesize 0 rules 20:640:480:640:480
a=framerate:20
a=rtpID:0
@SIP/Transport.c:121 type=4 (00000000/0)
[SIP/2.0 180 Ringing
Via: SIP/2.0/UDP m.0;branch=z9hG4bK106e5ff018690da9
To: "u0" <sip:[email protected]>;tag=999461336
From: "blafusel13" <sip:[email protected]>;tag=950727899
Call-ID: 90351360-7235-11dc-9ae6-fc6fa15013c4@lip
CSeq: 1 INVITE
Contact: <sip:[email protected]>
User-Agent: Viceroy 1.2
Content-Length: 0
@SIP/Transport.c:121 type=4 (00000000/0)
[SIP/2.0 100 Trying
Via: SIP/2.0/UDP m.0;branch=z9hG4bK106e5ff018690da9
To: "u0" <sip:[email protected]>
From: "blafusel13" <sip:[email protected]>;tag=950727899
Call-ID: 90351360-7235-11dc-9ae6-fc6fa15013c4@lip
CSeq: 1 INVITE
User-Agent: Viceroy 1.2
Content-Length: 0
Video Conference Support Report:
@SIP/Transport.c:1218 type=1 (00000000/0)
[NOTIFY sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP m.0;branch=z9hG4bK21ebc40938e66ac3
Max-Forwards: 70
To: "u0" <sip:[email protected]>;tag=999461336
From: "blafusel13" <sip:[email protected]>;tag=950727899
Call-ID: 90351360-7235-11dc-9ae6-fc6fa15013c4@lip
CSeq: 3 NOTIFY
Contact: <sip:[email protected]>;isfocus
Event: conference
Subscription-State: terminated;reason=noresource
User-Agent: Viceroy 1.2
Content-Length: 0
@SIP/Transport.c:1218 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP u0en0.0;branch=z9hG4bK294ea2d35c1d2655
To: "blafusel13" <sip:[email protected]>;tag=950727899
From: "u0" <sip:[email protected]>;tag=999461336
Call-ID: 90351360-7235-11dc-9ae6-fc6fa15013c4@lip
CSeq: 2 BYE
User-Agent: Viceroy 1.2
Content-Length: 0
@SIP/Transport.c:1218 type=1 (00000000/0)
[NOTIFY sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP m.0;branch=z9hG4bK6a2609544cbcf67a
Max-Forwards: 70
To: "u0" <sip:[email protected]>;tag=999461336
From: "blafusel13" <sip:[email protected]>;tag=950727899
Call-ID: 90351360-7235-11dc-9ae6-fc6fa15013c4@lip
CSeq: 2 NOTIFY
Contact: <sip:[email protected]>;isfocus
Event: conference
Subscription-State: active;expires=3600
User-Agent: Viceroy 1.2
Content-Type: application/conference-info+xml
Content-Length: 186
<c-i v="0" st="f" en="sip:[email protected]">
c<h>i</h><m t="a"/>
c<h>o</h><m t="a"/>
</c-i>
@SIP/Transport.c:1218 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP u0en0.0;branch=z9hG4bK063add5400ad6c74
To: "blafusel13" <sip:[email protected]>;tag=950727899
From: "u0" <sip:[email protected]>;tag=999461336
Call-ID: 90351360-7235-11dc-9ae6-fc6fa15013c4@lip
CSeq: 1 SUBSCRIBE
Contact: <sip:[email protected]>;isfocus
Expires: 3600
User-Agent: Viceroy 1.2
Content-Length: 0
@SIP/Transport.c:1218 type=1 (00000000/0)
[ACK sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP m.0;branch=z9hG4bK2f5118ef7b71533d
Max-Forwards: 70
To: "u0" <sip:[email protected]>;tag=999461336
From: "blafusel13" <sip:[email protected]>;tag=950727899
Call-ID: 90351360-7235-11dc-9ae6-fc6fa15013c4@lip
CSeq: 1 ACK
User-Agent: Viceroy 1.2
Content-Length: 0
@SIP/Transport.c:1218 type=1 (00000000/0)
[INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP m.0;branch=z9hG4bK106e5ff018690da9
Max-Forwards: 70
To: "u0" <sip:[email protected]>
From: "blafusel13" <sip:[email protected]>;tag=950727899
Call-ID: 90351360-7235-11dc-9ae6-fc6fa15013c4@lip
CSeq: 1 INVITE
Contact: <sip:[email protected]>;isfocus
User-Agent: Viceroy 1.2
Content-Type: application/sdp
Content-Length: 479
v=0
o=cape 0 0 IN IP4 m.6
s=blafusel13
c=IN IP4 m.6
b=AS:2147483647
t=0 0
a=hwi:1056:2:2160
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 0 RTP/AVP 12 3 0
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:1244757996
m=video 0 RTP/AVP 126 34
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:20
a=RTCP:AUDIO 0 VIDEO 0
a=pogo
a=fmtp:126 imagesize 0 rules 20:640:480:640:480
a=rtpID:-1337831700
@:0 type=2 (00000000/22)
[VCAUDIO_OUTGOINGATTEMPT]
[2]

well, i updated the router (latest firmware is from april 2006!). rebooted the modem, then the router, restarted ichat. same problem unfortunately. however i found some geeky cool-aid on macosxhints. a shell script which configures the router to enable dmz, and another one to disable dmz. with a little shell script one should be able to enable dmz, start ichat. and upon quitting ichat disable dmz. not the best solution, but this will help me out...
thanks to tony for his help! (we should send him a fruit basket or something 8)
http://www.macosxhints.com/article.php?story=20051015142349372

(PDWordGetAttrEx(pdWord, 0) & WXE_LAST_WORD_ON_LINE) is working in one document but not in any other

Hello,
I am using (PDWordGetAttrEx(pdWord, 0) & WXE_LAST_WORD_ON_LINE) to get the line breaks in a pdf document. I'm getting the correct results on the plugin_apps_developer_guide.pdf (The reference guide for plugin development to Adobe Acrobat), but not on any other pdf document. I've tried the code on both tagged and un-tagged document, but only this document is giving me the right result.
Can anyone please guide me what can be the possible reason in this and how this can be handled.
Thank You
Vaibhav

Hi Srikanth,
1. why there is no space between "HR.tblPeople" and "ORDER BY" in your query? I am surprised it works initially.
dim objcmd as new OledbDataAdapter _
("SELECT * FROM HR.tblPeople" _
& "ORDER BY LastName, FirstName",objConn)
2. use
Dim ds As New DataSet()
Sinclair

Risk terminator - Works in one system but not in the other

Hi
I have two SAP systems which is connected to one GRC system. Risk Terminator works well for the one system but does not work at all for the other.
I have done the necessary configuration, set-up the RFC connector, tested the connectors, tested the connections from the GRC system. All seems fine but when I create a role in PFCG risk terminator does not seem to be trigged at all in my one system.
Please advise
Regards
Mo

I would check the adapter for the other system and that the external program is maintained correctly along with all the settings in /VIRSA/ZRTCNFG

XML Query works on one database and not working on others with errLPX-00241

Similar Messages

Maybe you are looking for