[Xorg] Black screen with 2nd graphic card

Hi !
I'm a french (Sorry for my English) and new on ArchLinux.
I have a problem with my laptop, he have 2 graphics cards, the first one is an ATI Mobility Radeon HD4200 series and the second it's an ATI Radeon HD 5650.
The problem is when I want to use the second card,  I have a black screen when I start X. It's the same problem with ATI driver and xf86-video-ati driver even if my card is detected with "lspci" and by "aticonfig --list-adapters" with catalyst driver.
If you need, this is my Xorg log :
Xorg.log with catalyst
Xorg.log with free driver
And if you want  my xorg.conf , very basic.
Thanks for your help.

https://bbs.archlinux.org/viewtopic.php … 6#p1133766 FGLRX Configuration
I use one card and found I needed catalyst-dkms pkg as well as catalyst & catalyst-utils
Hope this helps.
Last edited by ackt1c (2012-11-27 15:37:05)

Similar Messages

  • !!! Problem with 2nd graphic card !!!

    Hi I have a big problem with my laptop.
    I have an HP TouchSmart tm2-2000el Notebook, with Windows 7 64-bit.
    2nd Graphic card is ATI RADEON HD Series 5450.
    When I activate this hardware from Control Panel desktop goes black but every function are ok (sounds, illumination and all cmds).
    So I must restart my computer in Safe Mode disactivate ATI Radeon HD 5450 and restart it.
    Laptop run but only with Intel graphic card.
    I tried to search update drivers on Amd/ATI site: amd online software reveals Ati radeon HD 5000 Series but after download Ati software tell me that is impossible to install drivers because there isn't an ATI Radeon HD 5000 Series.
    So I have low graphics and CPU with 69°C because intel graphic card runs over...
    I haven't found any driver for my model of laptop on HP Assistance.
    Touchsmart spec
    How can I do now?
    Thanks
    Alberto

    This is the right driver for switchable graphics...do not also install the Intel only driver, you do not need both.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-90545-1&cc=us&dlc=en&lc=en&...

  • HP Pavilion DV3 41700-EE Problem-Black Screen after installing graphic card driver

    Hi,
    Laptop Model : HP Pavilion DV3 41700-EE Entertainment series.
    I download the latest official driver for my lap top from this link : http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-93326-1&cc=us&dlc=en&lc=en&...
    After the installation i rebooted my device and after the windows loading i got a black screen ! i went to safe mode and unistall the video card and also it's driver from device manager and when i came back the black screen was gone but i have only my onboard Integ graphic which is very slow.
    also i went to AMD web site and get AMD Catalyst from their web site but nothing happened after the installation and i think they don't provide an appropriate driver for my lap top.
    i also tries to go to device manager and with right click on my display adapter and update driver point to the display driver location on my syste but this time it does not take time the black screen after restart, and in the middle of installation i got a black screen.
    Also i upgraded my BIOS Firmware from 16 to 24, but nothing changed.
    i just wanna know is it a software problem or hardware problem ? how can i find out that ?
    also i don't want this switchy manner and i don't care about the power efficency. i just want to my device work on maximum performance.
    What you suggest i do ?

    Use the recovery manager to reinstall the original AMD graphics driver and Catalyst Control center.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Dual Screen with multiple graphics cards?

    Hi,
    I have tried to utilise two screens, both to a seperate grahpics card but it does not seem to be working! Setting them as two different devices with BUS id's does not work and xrandr does not seem to be working either - it comes up that one of the screens is disconnected.
    Here is my 60-radeon.conf:
       Section "Device"
           Identifier     "Advanced Micro Devices, Inc. [AMD/ATI] RS780L [Radeon 3000]"
           Driver        "radeon"
           BusID        "PCI:1:05:0"
    EndSection
       Section "Device"
           Identifier    "Advanced Micro Devices, Inc. [AMD/ATI] Juniper XT [Radeon HD 6770]"
           Driver        "radeon"
           BusID        "PCI:2:00:0"
    EndSection
    And here is my xrandr command:
    xrandr --output VGA-0 --auto --output DVI-0 --auto --right-of VGA-0
    Any help would be greatly appreciated!

    ElKatrina wrote:the X server crashes
    It's my understanding that this should never happen, and always deserves a bug report upstream at xf86-video-ati or the X.org server.
    What you can first try is installing xf86-video-ati-git from AUR to see whether it's already fixed and just not in a stable release yet.
    The next step would just be collecting a stack trace and posting it on https://bugs.freedesktop.org/enter_bug.cgi?product=xorg in Driver/Radeon or so (only after looking whether ther is already a similar bug of course) depending on how the stacktrace looks.
    You really want a second computer and do this with ssh because a paused X server that controls the keyboard/mouse and the tty is not something you want to deal with...
    So you have an ssh server running and start X normally on your computer, then at the second computer you connect with ssh and attach gdb to the xserver with "sudo gdb /usr/bin/X $(pgrep -f /usr/bin/X)" or so. That will first pause the X Server and you have to "continue" with writing "c[enter]" or so. Then you do whatever you do to make it crash and when it is crashing, gdb will pause it again. Then you can get a backtrace with "bt[enter]". That will give you a list of function calls from which libraries lead up to the crash and possibly some extra information about parameters or so. Then quit with ctrl+d or "quit" or so.
    If you get stuck on a black screen on the PC with the crashing X server, try "startx" over ssh and then killing it with ctrl+c again. Starting and killing X "properly" helped at least for me when that happened.
    You can get a lot more information when you recompile some thing with debug symbols. For example if you have yaourt you can use yaourt -G xf86-video-ati-git to create a directory xf86-video-ati-git and download the PKGBUILD into it.
    In the PKGBUILD you can add !strip to options so it looks like "options=('!libtool' '!strip')" and in the build() function anywhere before autoreconf/make add export CFLAGS="-O0 -ggdb" (and if there is c++ code, export CXXFLAGS="-O0 -ggdb", but for xf86-video-ati and the x server there isn't I think) and then simply reinstall with "makepkg -fi"
    Now if you replicate the crash with packages with such debug information you can do "bt full" in gdb. Without these debug information you will just get a lot of "No symbol table info available." but with it you can get many variable values and function parameters that can help the developers greatly (possibly).

  • Black screen after adding graphics card to H530

    I am trying to install an EVGA Geoforce GTX 560 Ti into a H530. I have updated the PSU to 600w, and have tried to set the BIOS settings to the appropriate values. BIOS settings are: Display=AUTO, Secure Boot=Disabled, CSM=Enabled, Boot Mode=Auto (also tried Legacy), Boot Priority=Legacy First, Video Display=Auto (also tried PEG). Every time I install the card and boot, the screen comes up black. Once I remove the card, the display comes up normally. On board graphics uses VGA, GTX uses DVI. Any ideas?
    Solved!
    Go to Solution.

    OK, this is embarrassing enough that I almost didn't write back. The monitor I was using has both VGA and DVI inputs. It apparently defaults to VGA and I found a source switch to select digital & now everything is cool.
    Why I decided to write back, in addition to closing this out, is to point out that higher speed graphics cards can be supported on the H530. I installed an EVGA GTX560 Ti, which is not the fastest card in the world, but it looks like it compared to the list of cards cited in the maintenance manual which IMO are not enough of an improvement to bother with. Anyway, maybe the Bios settings I used will help someone else.

  • Cant open firefox on second screen on computer with two screens with two graphics cards.

    I have a computer with two screens and two diffrent graphics card. One of them is onboard GC and another one is USB GC. I am running two instances of FF and it works fine with 3.6.20 version. But when I update to the latest version of FF either 5 or 6 this does not work. Even if i try to open one instance of FF on second screen on USB GC , I cant see anything> i have to move it to the main screen to see the FF window and will not work on the extended screen. I am using windows 7 pro 32 bit and the screen resolution is set to 1280x1024 on both the screens.
    Can you please help.
    Thanks.
    Regards
    PJ

    Try to disable hardware acceleration.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    If disabling hardware acceleration works then check if there is an update available for your graphics display driver.
    *https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers

  • Xorg-server 1.6 - black screen with mouse cursor

    Hi
    First of all: I'm really new to Arch, so maybe there is a real easy fix for this problem
    Since upgrading to xorg-server 1.6 (and today to 1.6.1) I'm not able to get a running Desktop Environment.
    Usually I am using gnome with compiz-fusion on my Geforce 4 (nvidia-96xx 96.43.11-4 driver).
    When I boot my machine i see gdm and I am able to login. I can hear my login sound but I only get a black screen with a mouse cursor.
    I added a new test user to my system without compiz and get the same.
    I tried my old xorg.conf from 1.5, generated a new one with X -configure and tried without xorg.conf but everytime the same
    Actually I'm not sure if the xorg update is responsible for this, because i did not watch the upgrade-process....
    I googled this problem and was searching similar things in this froum, but I wasn't able to find something
    Here are some files
    xorg.conf (i know there are some bullshit things in it, but it was workig )
    # File generated by xorgconfig.
    # Copyright 2004 The X.Org Foundation
    # Permission is hereby granted, free of charge, to any person obtaining a
    # copy of this software and associated documentation files (the "Software"),
    # to deal in the Software without restriction, including without limitation
    # the rights to use, copy, modify, merge, publish, distribute, sublicense,
    # and/or sell copies of the Software, and to permit persons to whom the
    # Software is furnished to do so, subject to the following conditions:
    # The above copyright notice and this permission notice shall be included in
    # all copies or substantial portions of the Software.
    # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
    # The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
    # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
    # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    # SOFTWARE.
    # Except as contained in this notice, the name of The X.Org Foundation shall
    # not be used in advertising or otherwise to promote the sale, use or other
    # dealings in this Software without prior written authorization from
    # The X.Org Foundation.
    # Refer to the xorg.conf(5x) man page for details about the format of
    # this file.
    # Module section -- this section is used to specify
    # which dynamically loadable modules to load.
    Section "Module"
    # This loads the DBE extension module.
    Load "dbe" # Double buffer extension
    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
    SubSection "extmod"
    Option "omit xfree86-dga" # don't initialise the DGA extension
    EndSubSection
    # This loads the font modules
    # Load "type1"
    # Load "freetype"
    # Load "xtt"
    # This loads the GLX module
    Load "glx"
    # This loads the DRI module
    # Load "dri"
    EndSection
    # Files section. This allows default font and rgb paths to be set
    Section "Files"
    # The location of the RGB database. Note, this is the name of the
    # file minus the extension (like ".txt" or ".db"). There is normally
    # no need to change the default.
    # RgbPath "/usr/share/X11/rgb"
    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
    FontPath "/usr/share/fonts/misc/"
    FontPath "/usr/share/fonts/TTF/"
    # FontPath "/usr/share/fonts/OTF"
    FontPath "/usr/share/fonts/Type1/"
    FontPath "/usr/share/fonts/100dpi/"
    FontPath "/usr/share/fonts/75dpi/"
    FontPath "/usr/lib/X11/fonts/local/"
    FontPath "/usr/lib/X11/fonts/misc/"
    FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
    FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
    # FontPath "/usr/lib/X11/fonts/Speedo/"
    FontPath "/usr/lib/X11/fonts/Type1/"
    # FontPath "/usr/lib/X11/fonts/TrueType/"
    # FontPath "/usr/lib/X11/fonts/freefont/"
    FontPath "/usr/lib/X11/fonts/75dpi/"
    FontPath "/usr/lib/X11/fonts/100dpi/"
    # The module search path. The default path is shown here.
    # ModulePath "/usr/lib/modules"
    EndSection
    # Server flags section.
    Section "ServerFlags"
    # Uncomment this to cause a core dump at the spot where a signal is
    # received. This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    # Option "NoTrapSignals"
    # Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
    # (where n is 1 through 12). This allows clients to receive these key
    # events.
    # Option "DontVTSwitch"
    # Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    # Option "DontZap"
    # Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
    # sequences. This allows clients to receive these key events.
    # Option "Dont Zoom"
    # Uncomment this to disable tuning with the xvidtune client. With
    # it the client can still run and fetch card and monitor attributes,
    # but it will not be allowed to change them. If it tries it will
    # receive a protocol error.
    # Option "DisableVidModeExtension"
    # Uncomment this to enable the use of a non-local xvidtune client.
    # Option "AllowNonLocalXvidtune"
    # Uncomment this to disable dynamically modifying the input device
    # (mouse and keyboard) settings.
    # Option "DisableModInDev"
    # Uncomment this to enable the use of a non-local client to
    # change the keyboard or mouse settings (currently only xset).
    # Option "AllowNonLocalModInDev"
    EndSection
    # Input devices
    # Core keyboard's InputDevice section
    Section "InputDevice"
    Identifier "Keyboard1"
    Driver "kbd"
    # For most OSs the protocol can be omitted (it defaults to "Standard").
    # When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
    # uncomment the following line.
    # Option "Protocol" "Xqueue"
    Option "AutoRepeat" "500 30"
    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    # Option "Xleds" "1 2 3"
    # Option "LeftAlt" "Meta"
    # Option "RightAlt" "ModeShift"
    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults). For example, for a non-U.S.
    # keyboard, you will probably want to use:
    # Option "XkbModel" "pc105"
    # If you have a US Microsoft Natural keyboard, you can use:
    # Option "XkbModel" "microsoft"
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    # Option "XkbLayout" "de"
    # or:
    # Option "XkbLayout" "de"
    # Option "XkbVariant" "nodeadkeys"
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    # Option "XkbOptions" "ctrl:swapcaps"
    # These are the default XKB settings for Xorg
    # Option "XkbRules" "xorg"
    # Option "XkbModel" "pc105"
    # Option "XkbLayout" "us"
    # Option "XkbVariant" ""
    # Option "XkbOptions" ""
    # Option "XkbDisable"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "de"
    Option "XkbVariant" "nodeadkeys"
    EndSection
    # Core Pointer's InputDevice section
    Section "InputDevice"
    # Identifier and driver
    Identifier "Mouse1"
    Driver "mouse"
    Option "Protocol" "IMPS/2" # PS/2 Mouse
    Option "Device" "/dev/psaux"
    Option "Buttons" "5"
    Option "ZAxisMapping" "4 5"
    # When using XQUEUE, comment out the above two lines, and uncomment
    # the following line.
    # Option "Protocol" "Xqueue"
    # Mouse-speed setting for PS/2 mouse.
    # Option "Resolution" "256"
    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.
    # Option "BaudRate" "9600"
    # Option "SampleRate" "150"
    # Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
    # horizontal wheel to buttons 6 & 7. Change if your mouse has more than
    # 3 buttons and you need to map the wheel to different button ids to avoid
    # conflicts.
    Option "ZAxisMapping" "4 5 6 7"
    # Emulate3Buttons is an option for 2-button mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
    # Option "Emulate3Buttons"
    # Option "Emulate3Timeout" "50"
    # ChordMiddle is an option for some 3-button Logitech mice
    # Option "ChordMiddle"
    EndSection
    # Other input device sections
    # this is optional and is required only if you
    # are using extended input devices. This is for example only. Refer
    # to the xorg.conf man page for a description of the options.
    # Section "InputDevice"
    # Identifier "Mouse2"
    # Driver "mouse"
    # Option "Protocol" "MouseMan"
    # Option "Device" "/dev/mouse2"
    # EndSection
    # Section "InputDevice"
    # Identifier "spaceball"
    # Driver "magellan"
    # Option "Device" "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    # Identifier "spaceball2"
    # Driver "spaceorb"
    # Option "Device" "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    # Identifier "touchscreen0"
    # Driver "microtouch"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "1412"
    # Option "MaxX" "15184"
    # Option "MinY" "15372"
    # Option "MaxY" "1230"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    # Section "InputDevice"
    # Identifier "touchscreen1"
    # Driver "elo2300"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "231"
    # Option "MaxX" "3868"
    # Option "MinY" "3858"
    # Option "MaxY" "272"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonThreshold" "17"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    # Monitor section
    # Any number of monitor sections may be present
    Section "Monitor"
    Identifier "Eizo"
    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    HorizSync 24.8-80
    # HorizSync 30-64 # multisync
    # HorizSync 31.5, 35.2 # multiple fixed sync frequencies
    # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    VertRefresh 50-75
    EndSection
    # Graphics device section
    # Any number of graphics device sections may be present
    # Standard VGA Device:
    Section "Device"
    Identifier "Standard VGA"
    VendorName "Unknown"
    BoardName "Unknown"
    # The chipset line is optional in most cases. It can be used to override
    # the driver's chipset detection, and should not normally be specified.
    # Chipset "generic"
    # The Driver line must be present. When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module. Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.
    Driver "vga"
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for. When this line isn't present, a device
    # section can only match up with the primary video device. For PCI
    # devices a line like the following could be used. This line should not
    # normally be included unless there is more than one video device
    # intalled.
    # BusID "PCI:0:10:0"
    # VideoRam 256
    # Clocks 25.2 28.3
    EndSection
    # Device configured by xorgconfig:
    Section "Device"
    Identifier "GeForce4"
    # Driver "nv"
    Driver "nvidia"
    #VideoRam 131072
    # Insert Clocks lines here if appropriate
    EndSection
    # Screen sections
    # Any number of screen sections may be present. Each describes
    # the configuration of a single screen. A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    Section "Screen"
    Identifier "Screen 1"
    Device "GeForce4"
    Monitor "Eizo"
    DefaultDepth 24
    Option "AddARGBGLXVisuals" "true"
    Subsection "Display"
    Depth 8
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 16
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 24
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    EndSection
    # ServerLayout sections.
    # Any number of ServerLayout sections may be present. Each describes
    # the way multiple screens are organised. A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option. In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.
    Section "ServerLayout"
    # The Identifier line must be present
    Identifier "Simple Layout"
    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens. The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen. In this example, screen 2 is located to the
    # right of screen 1.
    Screen "Screen 1"
    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used. Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
    EndSection
    # Section "DRI"
    # Mode 0666
    # EndSection
    Section "Extensions"
    Option "Composite" "enable"
    EndSection
    Xorg.0.log
    X.Org X Server 1.6.1
    Release Date: 2009-4-14
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.29-ARCH i686
    Current Operating System: Linux delirium 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009 i686
    Build Date: 15 April 2009 11:09:10AM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 15 23:20:32 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Simple Layout"
    (**) |-->Screen "Screen 1" (0)
    (**) | |-->Monitor "Eizo"
    (**) | |-->Device "GeForce4"
    (**) |-->Input Device "Mouse1"
    (**) |-->Input Device "Keyboard1"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (WW) The directory "/usr/lib/X11/fonts/local/" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/lib/X11/fonts/misc/" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/lib/X11/fonts/75dpi/" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/lib/X11/fonts/100dpi/" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/lib/X11/fonts/Type1/" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/lib/X11/fonts/75dpi/" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/lib/X11/fonts/100dpi/" does not exist.
    Entry deleted from font path.
    (**) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    built-ins
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (**) Extension "Composite" is enabled
    (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    (WW) Disabling Mouse1
    (WW) Disabling Keyboard1
    (II) Loader magic: 0x1a40
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (++) using VT number 7
    (--) PCI:*(0@3:0:0) nVidia Corporation NV25 [GeForce4 Ti 4200] rev 163, Mem @ 0xe5000000/16777216, 0xd0000000/134217728, 0xd8000000/524288, BIOS @ 0x????????/131072
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded by default.
    (II) "dri" will be loaded by default.
    (II) "dri2" will be loaded by default.
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Server Extension
    (II) NVIDIA GLX Module 96.43.11 Mon Feb 23 15:43:14 PST 2009
    (II) Loading extension GLX
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "nvidia"
    (II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
    (II) Module nvidia: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Video Driver
    (II) NVIDIA dlloader X Driver 96.43.11 Mon Feb 23 15:32:04 PST 2009
    (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    (II) Primary Device is: PCI 03@00:00:0
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    (==) NVIDIA(0): RGB weight 888
    (==) NVIDIA(0): Default visual is TrueColor
    (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    (**) NVIDIA(0): Option "AddARGBGLXVisuals" "true"
    (**) NVIDIA(0): Enabling RENDER acceleration
    (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
    (II) NVIDIA(0): enabled.
    (II) NVIDIA(0): NVIDIA GPU GeForce4 Ti 4200 at PCI:3:0:0 (GPU-0)
    (--) NVIDIA(0): Memory: 131072 kBytes
    (--) NVIDIA(0): VideoBIOS: 04.25.00.34.00
    (II) NVIDIA(0): Detected AGP rate: 4X
    (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    (--) NVIDIA(0): Connected display device(s) on GeForce4 Ti 4200 at PCI:3:0:0:
    (--) NVIDIA(0): EIZO L578 (DFP-0)
    (--) NVIDIA(0): EIZO L578 (DFP-0): 165.0 MHz maximum pixel clock
    (--) NVIDIA(0): EIZO L578 (DFP-0): External Single Link TMDS
    (II) NVIDIA(0): Assigned Display Device: DFP-0
    (II) NVIDIA(0): Validated modes:
    (II) NVIDIA(0): "1280x1024"
    (II) NVIDIA(0): "1024x768"
    (II) NVIDIA(0): "800x600"
    (II) NVIDIA(0): "640x480"
    (II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
    (--) NVIDIA(0): DPI set to (95, 96); computed from "UseEdidDpi" X config
    (--) NVIDIA(0): option
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) NVIDIA(0): Initialized GART.
    (II) NVIDIA(0): Setting mode "1280x1024"
    (II) Loading extension NV-GLX
    (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
    (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
    (==) NVIDIA(0): Backing store disabled
    (==) NVIDIA(0): Silken mouse enabled
    (II) NVIDIA(0): DPMS enabled
    (II) Loading extension NV-CONTROL
    (==) RandR enabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing extension GLX
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (II) LoadModule: "evdev"
    (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 2.2.1
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (**) Macintosh mouse button emulation: always reports core events
    (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
    (II) Macintosh mouse button emulation: Found 3 mouse buttons
    (II) Macintosh mouse button emulation: Found x and y relative axes
    (II) Macintosh mouse button emulation: Configuring as mouse
    (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
    (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
    (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
    (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
    (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
    (**) Macintosh mouse button emulation: (accel) set acceleration profile 0
    (II) config/hal: Adding input device ImPS/2 Logitech Wheel Mouse
    (**) ImPS/2 Logitech Wheel Mouse: always reports core events
    (**) ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event6"
    (II) ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons
    (II) ImPS/2 Logitech Wheel Mouse: Found x and y relative axes
    (II) ImPS/2 Logitech Wheel Mouse: Found scroll wheel(s)
    (II) ImPS/2 Logitech Wheel Mouse: Configuring as mouse
    (**) ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
    (**) ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE)
    (**) ImPS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
    (**) ImPS/2 Logitech Wheel Mouse: (accel) filter chain progression: 2.00
    (**) ImPS/2 Logitech Wheel Mouse: (accel) filter stage 0: 20.00 ms
    (**) ImPS/2 Logitech Wheel Mouse: (accel) set acceleration profile 0
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
    (II) AT Translated Set 2 keyboard: Found keys
    (II) AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device saa7134 IR (LifeView FlyVIDEO30
    (**) saa7134 IR (LifeView FlyVIDEO30: always reports core events
    (**) saa7134 IR (LifeView FlyVIDEO30: Device: "/dev/input/event5"
    (II) saa7134 IR (LifeView FlyVIDEO30: Found keys
    (II) saa7134 IR (LifeView FlyVIDEO30: Configuring as keyboard
    (II) XINPUT: Adding extended input device "saa7134 IR (LifeView FlyVIDEO30" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    Last edited by MueLLe (2009-04-15 21:35:42)

    I'm having a very similar issue. Sometimes, when I boot and type in startx (I'm not even a GNOME user--I use dwm and no graphical login manager), I just get a black screen. No mouse cursor, so I think X doesn't even load. It only started with the xserver 1.6 update and the update to that hasn't changed anything. What I've been doing is just rebooting until it loads normally (takes one to three times). Is anyone else having this problem?

  • Black Screen With Xorg 1.6.1

    A few days ago, I upgraded xorg to 1.6.1 and probably also upgraded to the newest intel video driver.
    Since then, I get a black screen with an "X" cursor every time I try to start xfce4.
    Installing xf86-video-intel-legacy doesn't help, maybe I am missing some steps or doing it wrong somehow?
    Downgrading xorg to 1.6.0 doesn't help either, maybe I need to go even further back?
    Removing the intel video driver and specifying vesa in xorg.conf has the same result as before.
    Using a full, minimal, and no xorg.conf all has the same result.
    I just need to know what's causing the problem here but everything I try gives me a black screen. Thanks to anyone who can help me out!
    One more thing: I hate having to hold the power button to reboot every time i try something and get a black screen, I can hear my laptop hard drive screeching to a stop and I cringe every time. But ctrl+alt+backspace doesn't work and adding
    Section "ServerFlags"
    Option "DontZap" "false"
    EndSection
    to xorg.conf doesn't fix that.

    I'd post my log but I can't figure out how to get the log from the laptop to the windows PC im posting from now. I see the laptop using samba on the network from xp and i can browse it but i can't open any of the files. Also my flash drive doesn't appear under /media when I plug it in. I'll look into this tomorrow.
    As of right now, I am starting it by either typing startx or startxfce4 from the console, both give me a black screen. I don't use a login manager.
    I tried crtl+alt+ all the f keys and pretty much every other key combination I could think of with no luck

  • Laptop black screen with mouse when booting from shutdown [solved]

    Ok I am kind of at a loss at the moment. I have done a fresh install of arch for a friend. When I boot the laptop from a shutdown status it boots and I see systemd proccessing, but as soon as it reaches the desktop it is just a black screen with the mouse cursor. To reach the desktop I have to press ctl alt f1 than ctl alt f2.  Here are some things I have done to tryand fix it.
    The laptop
    Dell
    pentium M T2060, mobile 945GM
    ~/.xinitrc
    if [ -d /etc/X11/xinit/xinitrc.d ]; then
    for f in /etc/X11/xinit/xinitrc.d/*; do
    [ -x "$f" ] && . "$f"
    done
    unset f
    fi
    if which dbus-launch >/dev/null && test -z "$DBUS_SESSION_BUS_ADDRESS"; then
    eval "$(dbus-launch --sh-syntax --exit-with-session)"
    fi
    export GTK2_RC_FILES="$HOME/.gtkrc-2.0"
    exec openbox-session
    Openbox autostart.sh
    compton -CGb &
    pcmanfm --desktop &
    tint2 &
    sleep 4 && wbar
    slim.conf
    default_path /bin:/usr/bin:/usr/local/bin
    default_xserver /usr/bin/X
    xserver_arguments -nolisten tcp vt07
    halt_cmd /sbin/shutdown -h now
    reboot_cmd /sbin/shutdown -r now
    console_cmd /usr/bin/xterm -C -fg white -bg black +sb -T "Console login" -e /bin/sh -c "/bin/cat /etc/issue; exec /bin/login"
    #suspend_cmd /usr/sbin/suspend
    xauth_path /usr/bin/xauth
    authfile /var/run/slim.auth
    numlock on
    login_cmd exec /bin/bash -login ~/.xinitrc %session
    sessiondir /usr/share/xsessions/
    screenshot_cmd import -window root /slim.png
    welcome_msg Welcome to %host
    shutdown_msg The system is blowing up
    reboot_msg There is a virus...
    default_user tim
    auto_login yes
    current_theme default
    lockfile /var/lock/slim.lock
    logfile /var/log/slim.log
    I edited my hooks to look like this thinking that adding resume would help
    HOOKS="systemd modconf block resume filesystems keyboard fsck"
    Here is my syslinux.cfg
    DEFAULT arch
    PROMPT 0 # Set to 1 if you always want to display the boot: prompt
    TIMEOUT 50
    UI menu.c32
    #UI vesamenu.c32
    MENU TITLE Arch Linux
    #MENU BACKGROUND splash.png
    MENU COLOR border 30;44 #40ffffff #a0000000 std
    MENU COLOR title 1;36;44 #9033ccff #a0000000 std
    MENU COLOR sel 7;37;40 #e0ffffff #20ffffff all
    MENU COLOR unsel 37;44 #50ffffff #a0000000 std
    MENU COLOR help 37;40 #c0ffffff #a0000000 std
    MENU COLOR timeout_msg 37;40 #80ffffff #00000000 std
    MENU COLOR timeout 1;37;40 #c0ffffff #00000000 std
    MENU COLOR msg07 37;40 #90ffffff #a0000000 std
    MENU COLOR tabmsg 31;40 #30ffffff #00000000 std
    LABEL arch
    MENU LABEL Arch Linux
    LINUX ../vmlinuz-linux
    APPEND root=/dev/sda1 rw
    INITRD ../initramfs-linuxY.img
    LABEL archfallback
    MENU LABEL Arch Linux Fallback
    LINUX ../vmlinuz-linux
    APPEND root=/dev/sda1 rw
    INITRD ../initramfs-linux-fallback.img
    LABEL arch-ck
    MENU LABEL Arch Linux-ck
    LINUX ../vmlinuz-linux-ck
    APPEND root=/dev/sda1 ro init=/usr/lib/systemd/systemd elevator=bfq
    INITRD ../initramfs-linux-ck.img
    I have also tried linux-ck to try a different kernel with no luck. When I reboot the computer it goes to the desktop.
    Last edited by mich04 (2013-12-03 22:01:37)

    ok, so I think I have foud a solution that works for me.
    I created this file and added the following lines
    /etc/X11/xorg.conf.d/20-intel.conf
        Section "Device"
            Identifier  "Intel Graphics"
            Driver      "intel"
            Option      "AccelMethod"  "uxa"
          EndSection
    I have shutdown 3 times and it has booted to the desktop everytime. When I remove this file and go back to sna it reproduces the error of the black screen.

  • Windows xp install -- black screen with no cursor

    I've seen a number of posts about Boot Camp installation problems involving a black screen with a blinking cursor, but my problem is simply with a black screen. On my MacBook Pro 15" Core 2 Duo (graphics card: ATY,RadeonX1600) I'm able to partition the HD, but then after I'm prompted in Boot Camp to insert the Windows XP install disk, the computer attempts to restart and install, but after a flash of grey screen, the screen goes totally black, and eventually the optical drive powers down (after whirring for a while) -- no cursor, no nothing. I've tried a number of suggestions I've seen elsewhere: my firmware seems up-to-date (at least that's what I'm told when I try to run both EFI and SMC firmware updates); the Windows XP is a brand-new, single-disk, SP2 install disk; I've tried holding down the option key upon reboot and selecting windows start-up. I've used Parallels with no problem under 10.4.X, but recently upgraded to 10.5.2, and thought I'd try a Boot Camp installation for better access to peripherals. Any suggestions?
    Model Name: MacBook Pro 15"
    Model Identifier: MacBookPro2,2
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.16 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 4 MB
    Memory: 1 GB
    Bus Speed: 667 MHz
    Boot ROM Version: MBP22.00A5.B07
    SMC Version: 1.12f5

    Hello to all and it wanted to request aid to them on this subject, days ago I acquired a Imac 24"2.4GHZ Aluminum (generation previous to the last ones sent for a month),then it is that I have years with my macbook pro and always I have used bootcamp since was beta in Tiger, so installation experience I believe that I have a little.
    The problem is that in it is new machine I have partition my disc with the assistant without no problem, but when it is going to install Windows XP or Vista (the 2 I have them original) and boot the machine, it remains in gray screen and no nothing happens, reason why boot with option pressed and they leave systems both to me, followed this I select Windows and it is hoisted in the screen that nor the leader of the mouse moves.
    I have made the procedure as 10 times and proven with different sizes from partition (with its respective disc repair with the DVD of Leopard and the disc assistant) and nothing.
    Finally uses WinClone in my macbook pro and clone my partition of Vista Windows, recovers it in the Imac without no problem and it appears to me in startup but the same, I select Windows and there it remains. Fiirmware of the updated machine this and I am in OSX 10.5.3. I have proven everything until changes to the memories and nothing. Them request if somebody has had east problem and to most erudite of the forum I request aid to them to see if they can give me.
    Beforehand a million thanks to all,

  • Gnome Black Screen with Mouse Cursor after Login

    I am using Archlinux 64bit with a Gnome Desktop Environment. Everything was running normally uptill today. When i ran "sudo fc-cache", my system froze. I couldnt open any other app but i was able to access terminal. I restarted using "reboot" command. After that I was unable to log in to my desktop.
    The Gnome login screen comes and after entering the correct username and password, all I can see is a black screen with mouse cursor. I then started gnome manually with "startx" and it worked. But still I am unable to use normally (that is the graphical login). I reinstalled gdm but it didnt work. Please help me out.

    there are a lot of processess running... dunno killing which process will not cause a problem
    here is the xorg log  ( sorry i dont have much knowlegde to analyse it )
    [ 2957.489]
    X.Org X Server 1.16.1
    Release Date: 2014-09-21
    [ 2957.493] X Protocol Version 11, Revision 0
    [ 2957.494] Build Operating System: Linux 3.16.1-1-ARCH x86_64
    [ 2957.495] Current Operating System: Linux defo-arch 3.17.1-1-ARCH #1 SMP PREEMPT Wed Oct 15 15:04:35 CEST 2014 x86_64
    [ 2957.495] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=3c376af4-e330-4277-8bfa-388dabfced9e rw quiet
    [ 2957.497] Build Date: 21 September 2014 10:53:13AM
    [ 2957.498]
    [ 2957.499] Current version of pixman: 0.32.6
    [ 2957.501] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 2957.501] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 2957.506] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 26 01:36:27 2014
    [ 2957.507] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 2957.507] (==) No Layout section. Using the first Screen section.
    [ 2957.507] (==) No screen section available. Using defaults.
    [ 2957.507] (**) |-->Screen "Default Screen Section" (0)
    [ 2957.507] (**) | |-->Monitor "<default monitor>"
    [ 2957.507] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 2957.507] (==) Automatically adding devices
    [ 2957.507] (==) Automatically enabling devices
    [ 2957.507] (==) Automatically adding GPU devices
    [ 2957.507] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
    [ 2957.507] Entry deleted from font path.
    [ 2957.507] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 2957.507] Entry deleted from font path.
    [ 2957.507] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 2957.507] Entry deleted from font path.
    [ 2957.507] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 2957.507] Entry deleted from font path.
    [ 2957.507] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 2957.507] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 2957.507] Entry deleted from font path.
    [ 2957.507] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 2957.507] (==) FontPath set to:
    /usr/share/fonts/misc/
    [ 2957.507] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 2957.507] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 2957.507] (II) Loader magic: 0x818d80
    [ 2957.507] (II) Module ABI versions:
    [ 2957.507] X.Org ANSI C Emulation: 0.4
    [ 2957.507] X.Org Video Driver: 18.0
    [ 2957.507] X.Org XInput driver : 21.0
    [ 2957.507] X.Org Server Extension : 8.0
    [ 2957.509] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
    [ 2957.509] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 2957.510] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
    [ 2957.512] (--) PCI:*(0:0:2:0) 8086:2a02:1028:022f rev 12, Mem @ 0xfea00000/1048576, 0xe0000000/268435456, I/O @ 0x0000eff8/8
    [ 2957.512] (--) PCI: (0:0:2:1) 8086:2a03:1028:022f rev 12, Mem @ 0xfeb00000/1048576
    [ 2957.512] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 2957.512] (II) LoadModule: "glx"
    [ 2957.512] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 2957.514] (II) Module glx: vendor="X.Org Foundation"
    [ 2957.514] compiled for 1.16.1, module version = 1.0.0
    [ 2957.514] ABI class: X.Org Server Extension, version 8.0
    [ 2957.514] (==) AIGLX enabled
    [ 2957.514] (==) Matched intel as autoconfigured driver 0
    [ 2957.514] (==) Matched intel as autoconfigured driver 1
    [ 2957.514] (==) Matched modesetting as autoconfigured driver 2
    [ 2957.514] (==) Matched fbdev as autoconfigured driver 3
    [ 2957.514] (==) Matched vesa as autoconfigured driver 4
    [ 2957.514] (==) Assigned the driver to the xf86ConfigLayout
    [ 2957.514] (II) LoadModule: "intel"
    [ 2957.514] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 2957.515] (II) Module intel: vendor="X.Org Foundation"
    [ 2957.515] compiled for 1.16.1, module version = 2.99.916
    [ 2957.515] Module class: X.Org Video Driver
    [ 2957.515] ABI class: X.Org Video Driver, version 18.0
    [ 2957.515] (II) LoadModule: "modesetting"
    [ 2957.515] (WW) Warning, couldn't open module modesetting
    [ 2957.515] (II) UnloadModule: "modesetting"
    [ 2957.515] (II) Unloading modesetting
    [ 2957.515] (EE) Failed to load module "modesetting" (module does not exist, 0)
    [ 2957.515] (II) LoadModule: "fbdev"
    [ 2957.515] (WW) Warning, couldn't open module fbdev
    [ 2957.515] (II) UnloadModule: "fbdev"
    [ 2957.515] (II) Unloading fbdev
    [ 2957.515] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 2957.515] (II) LoadModule: "vesa"
    [ 2957.515] (WW) Warning, couldn't open module vesa
    [ 2957.515] (II) UnloadModule: "vesa"
    [ 2957.515] (II) Unloading vesa
    [ 2957.515] (EE) Failed to load module "vesa" (module does not exist, 0)
    [ 2957.515] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
    i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
    915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
    Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
    [ 2957.516] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
    [ 2957.516] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
    [ 2957.516] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
    [ 2957.516] (++) using VT number 1
    [ 2957.516] (--) controlling tty is VT number 1, auto-enabling KeepTty
    [ 2957.516] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20140725
    [ 2957.516] (--) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
    [ 2957.517] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1
    [ 2957.517] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 2957.517] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 2957.517] (==) intel(0): RGB weight 888
    [ 2957.517] (==) intel(0): Default visual is TrueColor
    [ 2957.517] (II) intel(0): Output LVDS1 has no monitor section
    [ 2957.517] (--) intel(0): Found backlight control interface acpi_video0 (type 'firmware') for output LVDS1
    [ 2957.517] (II) intel(0): Enabled output LVDS1
    [ 2957.517] (II) intel(0): Output VGA1 has no monitor section
    [ 2957.517] (II) intel(0): Enabled output VGA1
    [ 2957.517] (II) intel(0): Output HDMI1 has no monitor section
    [ 2957.517] (II) intel(0): Enabled output HDMI1
    [ 2957.517] (II) intel(0): Output TV1 has no monitor section
    [ 2957.517] (II) intel(0): Enabled output TV1
    [ 2957.517] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
    [ 2957.517] (II) intel(0): Output VIRTUAL1 has no monitor section
    [ 2957.517] (II) intel(0): Enabled output VIRTUAL1
    [ 2957.517] (--) intel(0): Output LVDS1 using initial mode 1280x800 on pipe 1
    [ 2957.517] (==) intel(0): TearFree disabled
    [ 2957.517] (==) intel(0): DPI set to (96, 96)
    [ 2957.517] (II) Loading sub module "dri2"
    [ 2957.517] (II) LoadModule: "dri2"
    [ 2957.517] (II) Module "dri2" already built-in
    [ 2957.517] (II) Loading sub module "present"
    [ 2957.517] (II) LoadModule: "present"
    [ 2957.517] (II) Module "present" already built-in
    [ 2957.517] (==) Depth 24 pixmap format is 32 bpp
    [ 2957.518] (II) intel(0): SNA initialized with Broadwater (gen4) backend
    [ 2957.518] (==) intel(0): Backing store enabled
    [ 2957.518] (==) intel(0): Silken mouse enabled
    [ 2957.518] (II) intel(0): HW Cursor enabled
    [ 2957.518] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 2957.518] (==) intel(0): DPMS enabled
    [ 2957.518] (II) intel(0): [XvMC] i965_xvmc driver initialized.
    [ 2957.518] (II) intel(0): [DRI2] Setup complete
    [ 2957.518] (II) intel(0): [DRI2] DRI driver: i965
    [ 2957.518] (II) intel(0): [DRI2] VDPAU driver: i965
    [ 2957.518] (II) intel(0): direct rendering: DRI2 enabled
    [ 2957.518] (II) intel(0): hardware support for Present enabled
    [ 2957.518] (==) intel(0): display hotplug detection enabled
    [ 2957.518] (--) RandR disabled
    [ 2957.569] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 2957.569] (II) AIGLX: enabled GLX_ARB_create_context
    [ 2957.569] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 2957.569] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 2957.569] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 2957.569] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 2957.569] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
    [ 2957.569] (II) AIGLX: enabled GLX_ARB_fbconfig_float
    [ 2957.569] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 2957.569] (II) AIGLX: Loaded and initialized i965
    [ 2957.569] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 2957.576] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 1, position (0, 0), rotation normal, reflection none
    [ 2957.583] (II) intel(0): Setting screen physical size to 338 x 211
    [ 2957.636] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
    [ 2957.636] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 2957.636] (II) LoadModule: "evdev"
    [ 2957.636] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 2957.637] (II) Module evdev: vendor="X.Org Foundation"
    [ 2957.637] compiled for 1.16.0, module version = 2.9.0
    [ 2957.637] Module class: X.Org XInput Driver
    [ 2957.637] ABI class: X.Org XInput driver, version 21.0
    [ 2957.637] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 15 paused 0
    [ 2957.637] (II) Using input driver 'evdev' for 'Video Bus'
    [ 2957.638] (**) Video Bus: always reports core events
    [ 2957.638] (**) evdev: Video Bus: Device: "/dev/input/event12"
    [ 2957.638] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 2957.638] (--) evdev: Video Bus: Found keys
    [ 2957.638] (II) evdev: Video Bus: Configuring as keyboard
    [ 2957.638] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input19/event12"
    [ 2957.638] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
    [ 2957.638] (**) Option "xkb_rules" "evdev"
    [ 2957.638] (**) Option "xkb_model" "pc104"
    [ 2957.638] (**) Option "xkb_layout" "us"
    [ 2957.669] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 2957.670] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 2957.670] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 16 paused 0
    [ 2957.670] (II) Using input driver 'evdev' for 'Power Button'
    [ 2957.670] (**) Power Button: always reports core events
    [ 2957.670] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 2957.670] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 2957.670] (--) evdev: Power Button: Found keys
    [ 2957.670] (II) evdev: Power Button: Configuring as keyboard
    [ 2957.670] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6/event2"
    [ 2957.670] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 2957.670] (**) Option "xkb_rules" "evdev"
    [ 2957.670] (**) Option "xkb_model" "pc104"
    [ 2957.670] (**) Option "xkb_layout" "us"
    [ 2957.671] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    [ 2957.671] (II) No input driver specified, ignoring this device.
    [ 2957.671] (II) This device may have been added with another device file.
    [ 2957.671] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
    [ 2957.671] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 2957.672] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 17 paused 0
    [ 2957.672] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 2957.672] (**) Sleep Button: always reports core events
    [ 2957.672] (**) evdev: Sleep Button: Device: "/dev/input/event3"
    [ 2957.672] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    [ 2957.672] (--) evdev: Sleep Button: Found keys
    [ 2957.672] (II) evdev: Sleep Button: Configuring as keyboard
    [ 2957.672] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7/event3"
    [ 2957.672] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
    [ 2957.672] (**) Option "xkb_rules" "evdev"
    [ 2957.672] (**) Option "xkb_model" "pc104"
    [ 2957.672] (**) Option "xkb_layout" "us"
    [ 2957.673] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
    [ 2957.673] (II) No input driver specified, ignoring this device.
    [ 2957.673] (II) This device may have been added with another device file.
    [ 2957.673] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3 (/dev/input/event7)
    [ 2957.673] (II) No input driver specified, ignoring this device.
    [ 2957.673] (II) This device may have been added with another device file.
    [ 2957.673] (II) config/udev: Adding input device HDA Intel Front Headphone Front (/dev/input/event8)
    [ 2957.673] (II) No input driver specified, ignoring this device.
    [ 2957.673] (II) This device may have been added with another device file.
    [ 2957.674] (II) config/udev: Adding input device HDA Intel Front Headphone Surround (/dev/input/event9)
    [ 2957.674] (II) No input driver specified, ignoring this device.
    [ 2957.674] (II) This device may have been added with another device file.
    [ 2957.674] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 2957.674] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 2957.675] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 18 paused 0
    [ 2957.675] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 2957.675] (**) AT Translated Set 2 keyboard: always reports core events
    [ 2957.675] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 2957.675] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 2957.675] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 2957.675] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 2957.675] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 2957.675] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
    [ 2957.675] (**) Option "xkb_rules" "evdev"
    [ 2957.675] (**) Option "xkb_model" "pc104"
    [ 2957.675] (**) Option "xkb_layout" "us"
    [ 2957.675] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event11)
    [ 2957.675] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
    [ 2957.675] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
    [ 2957.675] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "Default clickpad buttons"
    [ 2957.675] (II) LoadModule: "synaptics"
    [ 2957.676] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 2957.676] (II) Module synaptics: vendor="X.Org Foundation"
    [ 2957.676] compiled for 1.16.0, module version = 1.8.1
    [ 2957.676] Module class: X.Org XInput Driver
    [ 2957.676] ABI class: X.Org XInput driver, version 21.0
    [ 2957.676] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 19 paused 0
    [ 2957.676] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'
    [ 2957.676] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
    [ 2957.676] (**) Option "Device" "/dev/input/event11"
    [ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023 (res 0)
    [ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767 (res 0)
    [ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
    [ 2957.710] (II) synaptics: AlpsPS/2 ALPS GlidePoint: device does not report finger width.
    [ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: buttons: left right middle
    [ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: Vendor 0x2 Product 0x8
    [ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: invalid finger width range. defaulting to 0 - 15
    [ 2957.710] (**) Option "TapButton1" "1"
    [ 2957.710] (**) Option "TapButton2" "2"
    [ 2957.710] (**) Option "TapButton3" "3"
    [ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
    [ 2957.710] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
    [ 2957.710] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input10/event11"
    [ 2957.710] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD, id 10)
    [ 2957.710] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
    [ 2957.710] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MaxSpeed is now 1.75
    [ 2957.710] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) AccelFactor is now 0.156
    [ 2957.710] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
    [ 2957.710] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
    [ 2957.710] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
    [ 2957.710] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
    [ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
    [ 2957.711] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse1)
    [ 2957.711] (**) AlpsPS/2 ALPS GlidePoint: Ignoring device from InputClass "touchpad ignore duplicates"
    [ 2957.711] (II) config/udev: Adding input device ALPS PS/2 Device (/dev/input/event10)
    [ 2957.711] (**) ALPS PS/2 Device: Applying InputClass "evdev pointer catchall"
    [ 2957.712] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 20 paused 0
    [ 2957.712] (II) Using input driver 'evdev' for 'ALPS PS/2 Device'
    [ 2957.712] (**) ALPS PS/2 Device: always reports core events
    [ 2957.712] (**) evdev: ALPS PS/2 Device: Device: "/dev/input/event10"
    [ 2957.712] (--) evdev: ALPS PS/2 Device: Vendor 0x2 Product 0x8
    [ 2957.712] (--) evdev: ALPS PS/2 Device: Found 3 mouse buttons
    [ 2957.712] (--) evdev: ALPS PS/2 Device: Found relative axes
    [ 2957.712] (--) evdev: ALPS PS/2 Device: Found x and y relative axes
    [ 2957.712] (II) evdev: ALPS PS/2 Device: Configuring as mouse
    [ 2957.712] (**) evdev: ALPS PS/2 Device: YAxisMapping: buttons 4 and 5
    [ 2957.712] (**) evdev: ALPS PS/2 Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 2957.712] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input12/event10"
    [ 2957.712] (II) XINPUT: Adding extended input device "ALPS PS/2 Device" (type: MOUSE, id 11)
    [ 2957.712] (II) evdev: ALPS PS/2 Device: initialized for relative axes.
    [ 2957.712] (**) ALPS PS/2 Device: (accel) keeping acceleration scheme 1
    [ 2957.712] (**) ALPS PS/2 Device: (accel) acceleration profile 0
    [ 2957.712] (**) ALPS PS/2 Device: (accel) acceleration factor: 2.000
    [ 2957.712] (**) ALPS PS/2 Device: (accel) acceleration threshold: 4
    [ 2957.713] (II) config/udev: Adding input device ALPS PS/2 Device (/dev/input/mouse0)
    [ 2957.713] (II) No input driver specified, ignoring this device.
    [ 2957.713] (II) This device may have been added with another device file.
    [ 2957.713] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
    [ 2957.713] (II) No input driver specified, ignoring this device.
    [ 2957.713] (II) This device may have been added with another device file.
    [ 2957.714] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event5)
    [ 2957.714] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [ 2957.714] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 21 paused 0
    [ 2957.714] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
    [ 2957.714] (**) Dell WMI hotkeys: always reports core events
    [ 2957.714] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event5"
    [ 2957.714] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
    [ 2957.714] (--) evdev: Dell WMI hotkeys: Found keys
    [ 2957.714] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
    [ 2957.714] (**) Option "config_info" "udev:/sys/devices/virtual/input/input11/event5"
    [ 2957.714] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 12)
    [ 2957.714] (**) Option "xkb_rules" "evdev"
    [ 2957.714] (**) Option "xkb_model" "pc104"
    [ 2957.714] (**) Option "xkb_layout" "us"
    [ 2963.887] (II) evdev: Dell WMI hotkeys: Close
    [ 2963.887] (II) UnloadModule: "evdev"
    [ 2963.887] (II) systemd-logind: releasing fd for 13:69
    [ 2963.949] (II) evdev: ALPS PS/2 Device: Close
    [ 2963.950] (II) UnloadModule: "evdev"
    [ 2963.950] (II) systemd-logind: releasing fd for 13:74
    [ 2964.016] (II) UnloadModule: "synaptics"
    [ 2964.016] (II) systemd-logind: releasing fd for 13:75
    [ 2964.069] (II) evdev: AT Translated Set 2 keyboard: Close
    [ 2964.070] (II) UnloadModule: "evdev"
    [ 2964.070] (II) systemd-logind: releasing fd for 13:64
    [ 2964.123] (II) evdev: Sleep Button: Close
    [ 2964.123] (II) UnloadModule: "evdev"
    [ 2964.123] (II) systemd-logind: releasing fd for 13:67
    [ 2964.156] (II) evdev: Power Button: Close
    [ 2964.156] (II) UnloadModule: "evdev"
    [ 2964.156] (II) systemd-logind: releasing fd for 13:66
    [ 2964.183] (II) evdev: Video Bus: Close
    [ 2964.183] (II) UnloadModule: "evdev"
    [ 2964.183] (II) systemd-logind: releasing fd for 13:76
    [ 2964.271] (EE) Server terminated successfully (0). Closing log file.

  • Windows boots but won't load (Black screen with cursor)

    [Sorry for the long post, but I feel the need to fully explain my situation]
    I have the following problem:
    I turn on my PC, and Windows shows it's normal loading screen, after which it goes into a completely black screen, with just the mouse in the middle. By the cursor size I can tell that it's in a low resolution, probably 800x600 (compared to my usual 1920x1080). I am able to move the mouse around, but with no particular use without something to click on. No other keyboard input seems to work, except for Shift key 5 times, which brings up the Sticky Keys dialog box (with just "Yes" or "No" options, no other link); and Windows key+U which brings up the Ease of Access center. Ctr+Alt+Del does NOT work.
    So far this is what I have tried (in chronological order):
    Boot into Safe Mode, Safe Mode with Networking, Safe Mode with Command Prompt, Booting in low resolution video, Last known good configuration: all yield the same result as booting normally.
    Repair your computer:
    Startup Repair: Found Registry Errors (I realized and fixed this later on)
    System Restore: Did not find any previous restore points (I know for sure that there are, I made a habit of making restore points regularly).
    Windows Memory Diagnostics: Did not find errors.
    Command prompt:
    Ran chkdsk /f /r command, did not report errors.
    Ran sfc /scannow : I don't remember the exact report, but it asked for a restart to finish repairing problems. I restarted, and ran the command again for the same result.
    Forced the scan with: sfc /scannow /offbootdir=c:\ /offwindir=c:\windows , it found and repaired some errors, still could not load windows.
    Ran Dell Startup Diagnostics, found no errors.
    Ran Startup Repair again, found the registry errors again. I found the solution to this in a Microsoft Help forum ( answers.microsoft.com/.../f77d5355-b8be-41d6-af24-cae994e1768f ), and fixed the issue. I rebooted, but the problem persists.
    Startup Repair now finds no errors. I tried System Restore again, it found 2 restore points dated AFTER my problem started. I decided to restore anyways, but neither of them worked.
    I ran Windows Defender Offline:
    Quick Scan: and found 2 threats and removed them.
    Full System Scan: found 4 more threats, removed 2 of them, the other two couldn't be removed because they were within an ISO file.
    I tried Steps 1, 2 and 3 again with no luck.
    With each step I am aware that I'm closer to having to reinstall Windows, so I decided to see if I could still access my HHDD to save my personal files. I made a Linux live CD (with Ubuntu), but I am having trouble mounting the drives, because they are in a RAID0 configuration. "sudo dmraid -s" gives the following error: "ERROR: isw: wrong number of devices in RAID set "isw_dbdffjficc_ARRAY0" [1/2] on /dev/sdb".
    Important Details:
    I changed my graphics card about 4 months ago (an Nvidia GTX 750ti for an ATI Radeon HD 6450), and I was told that I may be running short with the Power Supply. The new card asks for a minimum of 450W and I think my PSU is 460W. This may or may not have something to do with this issue, I have no idea.
    The RAID0 configuration of my 2 500GB Hard Drives brought me a lot of problems from day 1. One of the HDD would randomly fail (I am able to hear a different clicking sound when this happens), and the computer would crash. Upon startup, it would ask for a boot device. The Dell startup utility would then only recognize 1 of the drives, but would finish without errors. After a restart or two, all would be fine and windows would boot normally (aside from the usual error recovery screen) without any sign of corrupted data or anything. Like I said, this has been happening form the day my PC arrived, but restarting a couple of times always fixed it. As of now, both HHDD seem to be working fine, the Dell utility recognizes both of them, and does not find errors in any of them, and I can access any directory from the command prompt.
    Is there anything else I should try before reinstalling Windows?
    Before the install, I would really like to be able to recover my files (I have important documents from college), is there any way to do this?
    Sorry again for the extremely long post (and for any language errors, English is not my native language), and thanks in advance.

    Since you still haven't got your data from the drive(s). I would advise performing a Windows installation without formatting the drive... I don't like this solution but at this stage you have probably tried everything else.
    Use a Windows 7 Reinstallation DVD when installing ensure you select...
    Select Custom: Install Windows only (advanced)
    If you do not select any of the drive options and simply highlight the largest partition and select next:
    Windows will dump all the old installation files in the Windows.old folder

  • Problem with nvidia graphic card, nvlddmkm.s​ys

    I have a HP m9000 , originally it had Vista, it started to fail and display the error nvlddmkm.sys (on a blue screen od death), i intalled Windows 8 in hope the problem get resolve. but the problem still persist. At the beginning on W8 it looks like working fine, but suddenly it started to display "controller not responding", and then it is displayin "Something goes wrong with your graphic card".
    I found on internet a fix; expanding the nvlddmkm.sy_ and replace the file in system32. i made it but right now after the windows logon screen the monitor starts to blink between black screen and off screen.
    The grapghic card is a NVIDIA 8500 GT. I tested the graphic card in other computer, and at the begining it worked fine, but after the dirver installation it started to fail in the same way.
    Ad far i could read on intetrnet it is a failure with NVIDIA.
    Is there any solution for this problem? Or i should change the graphic video card? (Maybe for an ATI)

    Hi,
    I have used many different NVIDIA cards (including a 8600) on different PCs and never had your issue.
    As for drivers, you can always use the original drivers that came with your PC and then do an update if necessary.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Xorg black screen on startup [SOLVED]

    THANK YOU EVERYONE WHO HELPED ESPECIALLY M177ER
    EDIT: NEW PROBLEM ON POST #9, a bunch of errors
    I've run the X -config *path to xorg.conf* command and there is just a black screen with a black X for the mouse cursor, I can move around the mouse or ctrl+alt+f1 to get back to the shell and kill X but that's about it. Here's the errors I get from X
    (EE) Failed to load module "type1" (module does not exist, 0)
    (EE) Failed to load module "record" (module does not exist, 0)
    Could not init font path element /usr/share/fonts/TTF, removing from list!
    Could not init font path element /usr/share/fonts/Type1, removing from list!
    I get the same thing when I try startx except it shuts down the x server automatically.
    I made the xorg.conf file with the built in program, here is the file.
    # Auto-generated by Archie mkxcfg
    # Auto-generated by Archie mkxcfg
    Section "ServerLayout"
    # Serial Mouse not detected
    # USB Mouse not detected
    Identifier "Xorg Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "PS/2 Mouse" "CorePointer"
    EndSection
    Section "Files"
    # Additional fonts: Locale, Gimp, TTF...
    # FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
    # FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
    # True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc:unscaled"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/100dpi"
    FontPath "/usr/share/fonts/PEX"
    FontPath "/usr/share/fonts/cyrillic"
    FontPath "/usr/share/fonts/Type1"
    FontPath "/usr/share/fonts/ttf/western"
    FontPath "/usr/share/fonts/ttf/decoratives"
    FontPath "/usr/share/fonts/truetype"
    FontPath "/usr/share/fonts/truetype/openoffice"
    FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
    FontPath "/usr/share/fonts/latex-ttf-fonts"
    FontPath "/usr/share/fonts/defoma/CID"
    FontPath "/usr/share/fonts/defoma/TrueType"
    EndSection
    Section "Module"
    Load "ddc" # ddc probing of monitor
    Load "dbe"
    Load "dri"
    Load "extmod"
    Load "glx"
    Load "bitmap" # bitmap-fonts
    Load "type1"
    Load "freetype"
    Load "record"
    # Load "synaptics"
    EndSection
    Section "ServerFlags"
    Option "AllowMouseOpenFail" "true"
    Option "AutoAddDevices" "False"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    Option "CoreKeyboard"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc101"
    Option "XkbLayout" "us"
    Option "XkbVariant" ""
    EndSection
    Section "InputDevice"
    Identifier "Serial Mouse"
    Driver "mouse"
    Option "Protocol" "Microsoft"
    Option "Device" "/dev/ttyS0"
    Option "Emulate3Buttons" "true"
    Option "Emulate3Timeout" "70"
    Option "SendCoreEvents" "true"
    EndSection
    Section "InputDevice"
    Identifier "PS/2 Mouse"
    Driver "mouse"
    Option "Protocol" "Auto"
    Option "ZAxisMapping" "4 5"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "true"
    Option "Emulate3Timeout" "70"
    Option "SendCoreEvents" "true"
    EndSection
    Section "InputDevice"
    Identifier "USB Mouse"
    Driver "mouse"
    Option "Device" "/dev/input/mice"
    Option "SendCoreEvents" "true"
    Option "Protocol" "IMPS/2"
    Option "ZAxisMapping" "4 5"
    Option "Buttons" "5"
    EndSection
    Section "Monitor"
    # Warning: This may fry old Monitors
    # Very conservative. May flicker.
    # VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
    # Default modes distilled from
    # "VESA and Industry Standards and Guide for Computer Display Monitor
    # Timing", version 1.0, revision 0.8, adopted September 17, 1998.
    # $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
    # 640x350 @ 85Hz (VESA) hsync: 37.9kHz
    Identifier "Monitor0"
    HorizSync 31.5 - 57.0
    VertRefresh 50.0 - 70.0
    ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
    ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
    ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
    ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
    ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
    ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
    ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
    ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
    ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
    ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
    ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
    ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
    ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync interlace
    ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
    ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
    ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
    ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
    ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
    ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
    ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
    ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
    ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
    ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
    ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
    ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
    ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
    ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
    ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
    ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
    ModeLine "1800x1440" 230.0 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
    ModeLine "1800x1440" 250.0 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
    ModeLine "640x480" 43.2 640 680 744 848 480 481 484 509 -hsync +vsync
    ModeLine "768x576" 35.0 768 792 872 976 576 577 580 597 -hsync +vsync
    ModeLine "768x576" 42.9 768 800 880 992 576 577 580 601 -hsync +vsync
    ModeLine "768x576" 45.5 768 808 888 1008 576 577 580 602 -hsync +vsync
    ModeLine "768x576" 51.8 768 808 888 1008 576 577 580 605 -hsync +vsync
    ModeLine "768x576" 62.6 768 816 896 1024 576 577 580 611 -hsync +vsync
    ModeLine "800x600" 68.2 800 848 936 1072 600 601 604 636 -hsync +vsync
    ModeLine "1024x768" 113.3 1024 1096 1208 1392 768 769 772 814 -hsync +vsync
    ModeLine "1152x864" 81.6 1152 1216 1336 1520 864 865 868 895 -hsync +vsync
    ModeLine "1152x864" 119.7 1152 1224 1352 1552 864 865 868 907 -hsync +vsync
    ModeLine "1152x864" 143.5 1152 1232 1360 1568 864 865 868 915 -hsync +vsync
    ModeLine "1280x960" 124.5 1280 1368 1504 1728 960 961 964 1001 -hsync +vsync
    ModeLine "1280x960" 129.9 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
    ModeLine "1280x960" 179.0 1280 1376 1520 1760 960 961 964 1017 -hsync +vsync
    ModeLine "1280x1024" 191.0 1280 1376 1520 1760 1024 1025 1028 1085 -hsync +vsync
    ModeLine "1400x1050" 122.6 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
    ModeLine "1400x1050" 149.3 1400 1496 1648 1896 1050 1051 1054 1094 -hsync +vsync
    ModeLine "1400x1050" 155.8 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
    ModeLine "1400x1050" 179.3 1400 1504 1656 1912 1050 1051 1054 1103 -hsync +vsync
    ModeLine "1400x1050" 214.4 1400 1512 1664 1928 1050 1051 1054 1112 -hsync +vsync
    ModeLine "1600x1200" 280.6 1600 1728 1904 2208 1200 1201 1204 1271 -hsync +vsync
    Option "DPMS" "true"
    # HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
    EndSection
    Section "Device"
    Identifier "Card0"
    Driver "vesa"
    VendorName "All"
    BoardName "All"
    Card "* Generic VESA compatible"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    DefaultDepth 16
    SubSection "Display"
    Depth 1
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 4
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 8
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 15
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 16
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 24
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 32
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    EndSection
    Section "DRI"
    Mode 0666
    EndSection
    Sorry for the large amount of code, but I haven't the faintest clue what to do now.
    Last edited by Spelchek (2009-02-04 05:01:43)

    I reinstalled xorg and I am now getting these errors. I think they have something to do with permissions but I'm a nub so what do I know?
    xauth: creating new authority file /home/mark/.serverauth.6141
    X.Org X Server 1.5.3
    Release Date: 5 November 2008
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.27-ARCH i686
    Current Operating System: Linux brotop 2.6.28-ARCH #1 SMP PREEMPT Sun Jan 25 10:13:11 UTC 2009 i686
    Build Date: 17 December 2008 08:20:05PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Tue Feb 3 06:02:24 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    Parse error on line 272 of section Screen in file /etc/X11/xorg.conf
    "EndSection" is not a valid keyword in this section.
    *** glibc detected *** /usr/bin/X: munmap_chunk(): invalid pointer: 0x081be964 ***
    ======= Backtrace: =========
    /lib/libc.so.6[0xb7b55ee4]
    /lib/libc.so.6[0xb7b56ec9]
    /usr/bin/X(xf86freeInputList+0x3f)[0x80defef]
    /usr/bin/X(xf86freeConfig+0x7f)[0x80e372f]
    /usr/bin/X(xf86readConfigFile+0x82)[0x80e3802]
    /usr/bin/X(xf86HandleConfigFile+0x9e)[0x80d5d0e]
    /usr/bin/X(InitOutput+0x5c8)[0x80aa9c8]
    /usr/bin/X(main+0x279)[0x8071a89]
    /lib/libc.so.6(__libc_start_main+0xe5)[0xb7b006c5]
    /usr/bin/X[0x8071071]
    ======= Memory map: ========
    08048000-081d3000 r-xp 00000000 08:02 443396 /usr/bin/Xorg
    081d3000-081da000 rw-p 0018a000 08:02 443396 /usr/bin/Xorg
    081da000-081ff000 rw-p 081da000 00:00 0
    08e1a000-08e3b000 rw-p 08e1a000 00:00 0 [heap]
    b7a4f000-b7a51000 rw-p b7a4f000 00:00 0
    b7a51000-b7a64000 r-xp 00000000 08:02 435922 /usr/lib/libz.so.1.2.3.3
    b7a64000-b7a65000 rw-p 00012000 08:02 435922 /usr/lib/libz.so.1.2.3.3
    b7a65000-b7ae6000 r-xp 00000000 08:02 436181 /usr/lib/libfreetype.so.6.3.19
    b7ae6000-b7aea000 rw-p 00080000 08:02 436181 /usr/lib/libfreetype.so.6.3.19
    b7aea000-b7c2a000 r-xp 00000000 08:02 501594 /lib/libc-2.9.so
    b7c2a000-b7c2b000 ---p 00140000 08:02 501594 /lib/libc-2.9.so
    b7c2b000-b7c2d000 r--p 00140000 08:02 501594 /lib/libc-2.9.so
    b7c2d000-b7c2e000 rw-p 00142000 08:02 501594 /lib/libc-2.9.so
    b7c2e000-b7c31000 rw-p b7c2e000 00:00 0
    b7c31000-b7c3d000 r-xp 00000000 08:02 436347 /usr/lib/libgcc_s.so.1
    b7c3d000-b7c3e000 rw-p 0000c000 08:02 436347 /usr/lib/libgcc_s.so.1
    b7c3e000-b7c45000 r-xp 00000000 08:02 499751 /lib/librt-2.9.so
    b7c45000-b7c46000 r--p 00006000 08:02 499751 /lib/librt-2.9.so
    b7c46000-b7c47000 rw-p 00007000 08:02 499751 /lib/librt-2.9.so
    b7c47000-b7c48000 rw-p b7c47000 00:00 0
    b7c48000-b7c6c000 r-xp 00000000 08:02 499734 /lib/libm-2.9.so
    b7c6c000-b7c6d000 r--p 00023000 08:02 499734 /lib/libm-2.9.so
    b7c6d000-b7c6e000 rw-p 00024000 08:02 499734 /lib/libm-2.9.so
    b7c6e000-b7dab000 r-xp 00000000 08:02 435927 /usr/lib/libcrypto.so.0.9.8
    b7dab000-b7dc1000 rw-p 0013c000 08:02 435927 /usr/lib/libcrypto.so.0.9.8
    b7dc1000-b7dc4000 rw-p b7dc1000 00:00 0
    b7dc4000-b7dc8000 r-xp 00000000 08:02 436192 /usr/lib/libXdmcp.so.6.0.0
    b7dc8000-b7dc9000 rw-p 00003000 08:02 436192 /usr/lib/libXdmcp.so.6.0.0
    b7dc9000-b7dff000 r-xp 00000000 08:02 436137 /usr/lib/libdbus-1.so.3.4.0
    b7dff000-b7e01000 rw-p 00036000 08:02 436137 /usr/lib/libdbus-1.so.3.4.0
    b7e01000-b7e10000 r-xp 00000000 08:02 436783 /usr/lib/libhal.so.1.0.0
    b7e10000-b7e11000 rw-p 0000e000 08:02 436783 /usr/lib/libhal.so.1.0.0
    b7e11000-b7e51000 r-xp 00000000 08:02 436767 /usr/lib/libpixman-1.so.0.12.0
    b7e51000-b7e53000 rw-p 0003f000 08:02 436767 /usr/lib/libpixman-1.so.0.12.0
    b7e53000-b7e54000 rw-p b7e53000 00:00 0
    b7e54000-b7e59000 r-xp 00000000 08:02 436180 /usr/lib/libfontenc.so.1.0.0
    b7e59000-b7e5a000 rw-p 00004000 08:02 436180 /usr/lib/libfontenc.so.1.0.0
    b7e5a000-b7e5c000 r-xp 00000000 08:02 436199 /usr/lib/libXau.so.6.0.0
    b7e5c000-b7e5d000 rw-p 00001000 08:02 436199 /usr/lib/libXau.so.6.0.0
    b7e5d000-b7eb6000 r-xp 00000000 08:02 436186 /usr/lib/libXfont.so.1.4.1
    b7eb6000-b7ebd000 rw-p 00058000 08:02 436186 /usr/lib/libXfont.so.1.4.1
    b7ebd000-b7ec2000 rw-p b7ebd000 00:00 0
    b7ec2000-b7ed6000 r-xp 00000000 08:02 501595 /lib/libpthread-2.9.so
    b7ed6000-b7ed7000 r--p 00014000 08:02 501595 /lib/libpthread-2.9.so
    b7ed7000-b7ed8000 rw-p 00015000 08:02 501595 /lib/libpthread-2.9.so
    b7ed8000-b7eda000 rw-p b7ed8000 00:00 0
    b7eda000-b7edc000 r-xp 00000000 08:02 501596 /lib/libdl-2.9.so
    b7edc000-b7edd000 r--p 00001000 08:02 501596 /lib/libdl-2.9.so
    b7edd000-b7ede000 rw-p 00002000 08:02 501596 /lib/libdl-2.9.so
    b7ede000-b7ee3000 r-xp 00000000 08:02 436757 /usr/lib/libpciaccess.so.0.10.2
    b7ee3000-b7ee4000 rw-p 00004000 08:02 436757 /usr/lib/libpciaccess.so.0.10.2
    b7ee4000-b7ee5000 rw-p b7ee4000 00:00 0
    b7eea000-b7eec000 rw-p b7eea000 00:00 0
    b7eec000-b7eed000 r-xp b7eec000 00:00 0 [vdso]
    b7eed000-b7f09000 r-xp 00000000 08:02 499728 /lib/ld-2.9.so
    b7f09000-b7f0a000 r--p 0001b000 08:02 499728 /lib/ld-2.9.so
    b7f0a000-b7f0b000 rw-p 0001c000 08:02 499728 /lib/ld-2.9.so
    bf7f5000-bf80a000 rw-p bffeb000 00:00 0 [stack]
    xinit: Server error.

  • Black screen with message "Debugger Called: Button SCI "

    I got my MBP's logic board replaced by Apple four weeks ago. That succesfuly fixed the issues I was having with my graphics card, but today while I was browsing the internet with Chrome, my display turned black and then a screen with the following text showed up:
    Debugger called: <Button SCI>
    Entering system dump routine
    Attempting connection to panic server configured at
    Apple FWOHCI_KDP: Darwin Kernel Version 12.5.0: Sun Sep 29 13:44:47 PDT 2013; root:xnu-2050.48-12-1/RELEASE_X86_64
    Apple FWOHCI_KDP: V4.9.9 configured as KDP sender/receiver
    I just waited for 5 minutes and nothing else happened. So I pushed and hold the power button to turn it off and then turned it on again. Now it's working normally...
    What was that?
    How do I prevent this from happening again?
    Should I take it back to the Apple Store? (This would be the least convenient solution since I'm currently abroad and there are no Apple Stores here.)

    Hi , and a warm welcome to the forums!
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
    If 10.7.0 or later...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    And sorry to report that OSX is more Widows like than ever, but….
    If that doesn't help Reinstall the OS.

Maybe you are looking for

  • New Macbook pro cannot connect to home wi fi HELP

    Hello my kids both got macbook pro with OS X mountain lion.  All the ipads and computers in the house can connect to the wi fi network except these new ones. Do you know a simple solution. Note:  the internet works using my neighbor's signal which is

  • HT3983 i have a sound problem when i install windows 7 32 bit on my imac

    i have a sound problem when i install windows 7 32 bit on my imac

  • What can I safely delete?

    I started with GB v1 and have updated thru v2 to v3. I'm now left with the problem of the original GarageBand loops being duplicated. I have read the links in this forum about re-indexing but upon exploring my Finder files, I discovered the following

  • Is Header Data is must in BI?

    In some companies they are using ITM datasources without HDR, Is this right? What is the necessary of HEADER level datasource?

  • Creating iTunes U content on MacBook Pro?

    Is there a way I can create iTunes U course content on my MacBook Pro for my students to access on their iPads/iPhones, etc?  I chose to purchase a MacBook Pro over an iPad as it is easier to create content/resources, but finding it more and more dif