XP no longer shows up as a startup disk

After upgrading to leopard today, my XP partition no longer shows up as a startup disk.
I had/have my windows partition on it's own drive that was NOT created with bootcamp. I pulled my osx disk from the my mac pro and installed windows on the disk i had in bay 2 using 100% of the disk (ntfs). after installing the bootcamp windows drivers, i reinserted the osx disk and all has been well for the last 4 months,... until the upgrade today that is.
Now, when i go to the 'Startup Disk' preference Windows is no longer an option. the disk still shows up in Finder and I can navigate around the file system.
Anyone have any ideas on how I can get it to show up again? I'd really rather not have to reinstall if i can avoid it.
thx.

I have exactly the same problem (well, maybe).
I have installed MacFUSE and ntfs-3g. I don't know if this is of any relevance, because I don't know if it was working directly before I installed them.
I have my OS X and NTFS volumes on the same physical disk. I also had to install Windows twice because I buggered it up the first time (formatted the partition as FAT32 and ran into a bunch of disk errors).
I also notice that in WinClone I have 2 Untitled Volumes at /dev/disk0s3 and /dev/disk1s1. /dev/disk0s3 seems to be the legit Windows NTFS partition, but I have no idea what /dev/disk1s1 is about. I don't know if it's been there all along or not but perhaps it is confusing matters and stopping the legit Windows volume/installation from being detected...? Should that second volume exist at all? It doesn't exist according to the Disk util.
edit: I used fdisk just to have a look at the two untitled partitions.
Jacbook:dev jacteh$ sudo fdisk /dev/disk0s3
Disk: /dev/disk0s3 geometry: 10651/255/63 [171117408 sectors]
Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
1: 72 368 111 45 - 371 101 51 [ 218129509 - 1701990410] <Unknown ID>
2: 74 67 115 32 - 299 114 44 [ 729050177 - 543974724] <Unknown ID>
3: 65 114 111 32 - 353 115 52 [ 168653938 - 0] Netware 3.xx
4: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
Jacbook:dev jacteh$ sudo fdisk /dev/disk1s1
Disk: /dev/disk1s1 geometry: 0/4/63 [63 sectors]
Signature: 0x0
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
1: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
2: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
3: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
4: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
I can hold the option key upon startup and manually enter Windows like that, but I'd prefer to be able to restart and boot Windows without having to hold a key.
Apart from not seeing the Windows boot volume in the system prefs pane, Boot Camp (and the rest of Leopard) has been excellent. I am impressed at the level of apple hardware support for windows. It seems to be much better than most native PC hardware.
I am dying for an answer. It's a fairly minor problem in the grand scheme of things, but **** it's frustrating.
Message was edited by: jacteh

Similar Messages

  • NetBoot images are not showing up in the Startup Disk window

    I have created a few Netboot images, enabled them and placed them in the correct place.
    They don't show up in the Startup Disk window.
    I have noticed that bootparamd is not running, and that after a while also bootpd disappeared.
    Strange, no?
    (I started them back up and it didn't make a difference.)
    Message was edited by: marc herman

    It looks like the NFS exports has separate entries for both:
    /Volumes/xxxxx
    /Volumes/xxxxx/Library/NetBoot/NetBootSP0
    and that's not allowed. You can't separately export a directory and one of its subdirectories on the same file system.
    It sounds like maybe the Server Admin tools are confused. If you don't really need /Volumes/xxxxx exported, then I think just deleting that share should fix things up.
    If you can't get the tools to straighten things out, you could override all the NFS exports with your own defined in /etc/exports. There's an exports(5) man page that describes the format and creating an /etc/exports file will override anything in NetInfo (10.4 and earlier).
    If you want to export both directories, they just need to be listed in the same exports entry, like:
    /Volumes/xxxxx /Volumes/xxxxx/Library/NetBoot/NetBootSP0
    This causes the "/Volumes/xxxxx" file system to be exported and allows only the directories "/Volumes/xxxxx" and "/Volumes/xxxxx/Library/NetBoot/NetBootSP0" to be mounted.
    HTH
    --macko

  • IPhone no longer shows up as a hard disk for photo transfer

    When I used to plug in my iPhone it would show up in the My Computer page as an external disk. If I clicked through the folders I could easily move pics from my phone to the computer. I had already shut off the auto open feature of the program select.
    Not sure why my iPhone no longer shows up. It shows up fine with iTunes

    Greetings,
    The iPhone won't work as an external disk, never has, by default. It will show up in iTunes, it is supposed to there, but not on your desktop.
    Are you thinking of an iPod Touch, maybe? Maybe you have a phone that was tampered with, maybe?
    There are third party apps that might do what you are talking about.
    Cheers,
    M.

  • My Firewire Clone is not showing up in the Startup Disk selection window

    Going to the Startup Disk section Under System Preferences to locate my mounted Firewire/cloned HD - But it's not showing up there for start up selection.
    The external firewire clone, running OS X 10.4.11 shows up in the finder right away. Also I have mounted and used it as the start up disk on several other computers just fine. The current computer I'm having issues mounting to is a: 2 ghz Intel MacBook with 1 gb ram running 10.4.11
    The previous computers that I have had success mounting to were a G4 ibook and a G5 imac(OSX 10.4.11). - Don't know if the Intel part is why I can't mount?
    Any ideas or fixes - Thanks!

    What to do if your computer won't recognize a FireWire device
    http://docs.info.apple.com/article.html?artnum=88338
    Dealing with FireWire problems (drives not mounting, devices unrecognized, etc.)
    http://www.macfixit.com/article.php?story=20041221081432908
     Cheers, Tom

  • External backup drive doesn't show in System Preferences/Startup Disk

    Using SuperDuper!, I thought I created a bootable backup on my LaCie FW 200GB ext. HD. I opened System Preferences/Startup Disk to try booting from the LaCie by changing the Startup Disk to the LaCie. The LaCie didn't appear, there. My Mac HD is there, and a Network Startup icon with a question mark in it, is there. I'm on a standalone machine. My Ethernet port is used for a cable modem.
    I Restarted and held down the Option key to see if the LaCie would show up that way. No luck. The LaCie is mounted on my desktop, and the System Profiler shows it on the FW bus. So, I don't really have a bootable backup drive (or volume). The LaCie is not partitioned, nor is my internal startup disk.
    I did use Disk Utility & found I had to repair the LaCie. Initially, DU said the disk couldn't be repaired, but on a repeat, the LaCie shows as repaired.
    How can I get the LaCie to show up in System Preferences/Startup Disk?

    Select the external drive's icon and press COMMAND-I to open the Get Info window. In the pane labeled "Ownership and Permissions click on the small triangle gadget beside the word Details. You should see at the bottom a box labeled "Ignore permissions on this volume." If there's a checkmark in the box uncheck it. Close the Get Info window. Now see if the drive appears in the Startup Disk preference.
    If you still have a problem then you might try the following:
    Extended Hard Drive Preparation
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
    Next clone your system to the external drive:
    How to Clone Using Restore Option of Disk Utility
    1. Select the destination drive on the Desktop and press COMMAND-I to open the Get Info window. At the bottom in the Ownership and Permissions section be sure the box labeled "Ignore Permissions on this Volume" is unchecked. Set Ownership and Permissions as follows: Owner=system with read/write; Group=admin with read/write; Other with read-only.
    2. Open Disk Utility from the Utilities folder.
    3. Select the backup or destination volume from the left side list.
    4. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
    5. Click on the Restore tab in the DU main window.
    6. Select the backup or destination volume from the left side list and drag it to the Destination entry field.
    7. Select the startup or source volume from the left side list and drag it to the Source entry field.
    8. Double-check you got it right, then click on the Restore button.
    For added precaution you can boot into safe mode before doing the clone.

  • Audio not showing onTV monitor  -  HD Startup disk fault.

    In FCP5 my settings have gone awry with Default Audio showing 'everwhere' except in the Timeline Settings Audio Output where I note "Load Audio Preset" refuses to quit and let in Default Audio as my setting.
    I get audio from the computer as if the View setting is not on All Frames when it actually is. The video plays quite clearly in the monitor with the audio coming from the MacPro.
    Repairing and verifying permissions led me to verify HD which produced - "Disk Utility stopped verifying Macintosh HD because the following error was encountered:
    The underlying task reported failure on exit. 1 HFS volume checked. Volume needs repair."
    Using Disk Utility I again tried to get into disk repair for the HD. Greyed out. Used the install startup disk utility and got the same result so I now am stuck and can't finish off projects in FCP because of the audio error.
    Info sent to Apple on their Feedback page. No more heard.
    Help anyone.. ? T.I.A.
    Ron

    You ARE running v5.1 on your intel machine - correct? If not, that could be the source of your problem.
    If you are running v5.1,
    The first time you run FCP Attic, simply TRASH the preferences and restart the system. The program will generate new preference files with the default settings.
    Once you get the application stable - then use Attic to BACKUP the known to be good prefs. If you run into corrupted preferences later, simply RESTORE back to operable versions.
    Diskwarrior 4 is available but, if you are upgrading from an earlier version, it is only available on CD. It takes a couple of weeks to ship it. If you are purchasing a new version, I believe you can download and burn your own CD.
    Reinstalling FCP doesn't fix as much stuff as you'd think.
    Try this.
    -Boot up the computer and go to System Preferences>Accounts
    -Click on the '+' at the bottom of the list of accounts to create a new user account. Call it whatever makes sense but be sure to give it admin privileges.
    -Log out of your current account into the new account.
    -Launch FCP. Do things work as they should?
    -If so, you definately have an FCP preferences issue and Attic usually takes care of these
    -If not, you have other problems and should start thinking about a complete wipe of the hard drive and a reinstall of the OS and applications from scratch.
    report back.
    x

  • Time machine no longer backs up after cloning startup disk

    I cloned my startup disk (250 mb) in April 2013 to a 500 mb disk and replaced it with the cloned disk. Before the clone, Time Machine was backing up properly to the 6tb external drive designated for backup.  Since installing the clone Time Machine has not backed up anything.  Everything (all the apps) is working properly on the cloned disk except, apparently, Time Machine. In fact, I cannot get Time Machine to allow me to make any adjustments to the settings. I went on the Apple Support website to see if I can reinstall Time Machine, but could not find anything. Any suggestions?
    Model Name:          Mac Pro
      Model Identifier:          MacPro1,1
      Processor Name:          Dual-Core Intel Xeon
      Processor Speed:          2.66 GHz
      Number Of Processors:          2
      Total Number Of Cores:          4
      L2 Cache (per processor):          4 MB
      Memory:          12 GB
      Bus Speed:          1.33 GHz
      Boot ROM Version:          MP11.005C.B08
      SMC Version (system):          1.7f10

    If only the system was cloned with CCC it should work, though if you change names who knows.
    Delete the plist and turn off and on.
    they don't make 6TB so you're using some kind of array or JBOD.
    http://www.apple.com/support/timemachine
    subsection in Mac OS X forum.
    TimeMachine 101
    https://support.apple.com/kb/HT1427
    Lion Recovry & TimeMachine
    http://www.apple.com/support/lion/installrecovery/
    http://www.apple.com/support/lion/
    Time Machine’s Gory Details:
    https://www.apple.com/support/timemachine/
    How To Restore Your System
    http://pondini.org/TM/14.htmlMac OS X v10.7 Lion
    Back-In-Time 2: Unleash the power of Time Machine
    Restore Time Machine data: Time Machine is a great basic backup tool. But the options for locating and restoring data are quite limited. Back-In-Time gives you total flexibility in discovering and recovering your data to any location on your Mac. See more...

  • Trash shows no content -- and startup disk is allegedly full

    Hello all,
    By the time you read this my Time Machine backup will have hopefully finished and I will have proceeded to erase my hard drive and reinstall the Mavericks with the internal malice of a waterboarder. 
    But I'd like to get some feedback from you supers-smarties out there on what could have happened. 
    I do support on Macs and so like a carpenter when I'm home, my MacBook Pro is always a work in progress.  One thing I didn't bother to do was clear out the content of the ~Keychain folder because I was getting that annoying "x service wants to use your login keychain -- enter your password" message.  I have root user enabled and I barely use it, but the root user password always seemed to neutralize those annoying windows when I first start up the MBP.  But aside from appeasing one said message, the MBP left me alone and everything was fine. 
    I recently experimented with moving my iTunes folder to the Users/Shared folder to see if 2 different users can access the same library.  I got a message that the test user that I set up didn't have permission to open iTunes to said iTunes folder...even after I changed the permissions of the folder to read & write for the test user specifically. 
    I also noticed that since moving that iTunes folder, my system started getting that spinning color wheel.  So I removed Caches from all libraries and Removed launch agents and daemons from the root library... and finally the contents of the ~Keychain folder.  Nothing drastic.  Just stuff that I knew my hard drive could reproduce. When I restarted, I was still getting the keychain messages AND when I went to empty the trash, there was NO content!  And when I tried to download a resume.docx from an email, I got a message that my startup drive was out of space.  Bullcrap.  Of 250 GB, the partition had 60 GB free. I can't even take a screen shot of the "Other details & Tags" portion of this post where I wrote "Los Lonely Boys are terrible" because my startup disk is so full.
    I first used Terminal to sudo empty the trash -- no improvement.  I then reinstalled Mavericks -- and when that didn't resolve the issue either, I figured I'd reindex spotlight.  Because the hard disk was allegedly almost full, it took 7 hours.  Issue persisted. I couldn't even start to Safe Mode.  I got a message saying "Unapproved Caller.  Securty Agen may only be infoked by Apple Software." (I'm using a legit copy of Mavericks, btw -- it's free, so what's the point of pirating?) So now, I'm erasing and migrating my User Data back on. 
    The only thing I can think of is either that I had a virus (in which case I'd like to know where in the filing system of my last Time Machine backup I could look for it) or I just user-errored that crap out of this thing. 
    I have no angry responses to your suggestions waiting as I don't get frustrated about computer matters anymore, plus, I'm fixing it one way or another with a computabotomy.  So any meditations and rhetorical answers are welcome and appreciated.  

    You can check out your hard drive size and available space in Applications > Utilities > Disk Utility.
    Click on the named boot volume (Macintosh HD unless you've changed it) and look at the bottom of the pane to find the capacity and available space. What does it say?
    I haven't used it, but some people recommend WhatSize to find out what may be taking up hard drive space:
    http://whatsizemac.com/

  • Boot Camp not showing anymore as a Startup Disk option?

    For months, my internal 1TB had been partitioned 750GB/250GB OS X 10.6/Windows 7, with no problems - I want to use Windows, I either reboot and hold Alt, then choose Windows when the menu comes up, or I go System Preferences > Startup Disk and change it to "Boot Camp".
    A few days ago I shrank the 10.6 partition by 200GB using Disk Utility, then formatted the space as Mac OS Extended and installed the preview of OS X 10.7 Lion (I was invited to try it via the AppleSeed programme).
    Since then, the only options I have in System Prefs > Startup Disk or when holding Alt during boot are 10.6 and 10.7 - Boot Camp seems to have vanished as a choice. If I open Disk Utility, Boot Camp is still there, still 250GB. If I browse the Boot Camp partition in OS X I can see all my Windows files, etc, it just seems to be gone as a bootable option
    Help!

    I have the same problem...  Can do WinClone, not supported on Lion, to get an image backup of W7 partition.  At this point, since I can get to all the data on that partition, I would be more than happy to do an image backup of it, reinstall Windows 7 to get the boot partition to work, then reimage back to that original W7 partition so that I wouldn't have to reinstall and reconfigure all my applications.
    My data is:
    *** Report for internal hard disk ***
    Current GPT partition table:
    #      Start LBA      End LBA  Type
    1             40       409639  EFI System (FAT)
    2         409640    253309143  Mac OS X HFS+
    3      253309144    254578687  Mac OS X Boot
    4      254578688    977104895  Basic Data
    Current MBR partition table:
    # A    Start LBA      End LBA  Type
    1              1       409639  ee  EFI Protective
    2         409640    253309143  af  Mac OS X HFS+
    3      253309144    254578687  ab  Mac OS X Boot
    4      254578688    977104895  07  NTFS/HPFS
    MBR contents:
    Boot Code: Unknown, but bootable
    Partition at LBA 40:
    Boot Code: None (Non-system disk message)
    File System: FAT32
    Listed in GPT as partition 1, type EFI System (FAT)
    Partition at LBA 409640:
    Boot Code: None
    File System: HFS Extended (HFS+)
    Listed in GPT as partition 2, type Mac OS X HFS+
    Listed in MBR as partition 2, type af  Mac OS X HFS+
    Partition at LBA 253309144:
    Boot Code: None
    File System: HFS Extended (HFS+)
    Listed in GPT as partition 3, type Mac OS X Boot
    Listed in MBR as partition 3, type ab  Mac OS X Boot
    Partition at LBA 254578688:
    Boot Code: Windows BOOTMGR (Vista)
    File System: NTFS
    Listed in GPT as partition 4, type Basic Data
    Listed in MBR as partition 4, type 07  NTFS/HPFS

  • 10.3.9 doesn't show up as a startup disk

    A massive pain here.
    I'm at a friend's computer helping him with problems on this outdated 350Power PC with 256MBRAM. It's running (usualluy 10.3.9)
    I started up from classic to check something and when it loaded it tells me I'm in 9.2.1 (not 9.2.2) and when I go to start up disk in the control panel, 10.3.9 is not visible and consequently not available.
    He's recently moved and we can't find either the OSX nor the 9.2.2 disks anywhere, so I can't start up from the disk.
    How do I get back to 10.3.9?
    I'm flying home in a few hours and can't leave him like this. Please help!
    Joe

    Four different guys I spoke with said re-installing 3.9 was the only solution.
    Then I spoke with a friend who told me to hold down the X key when restarting, which worked like a charm.
    Shouldn't there be a list of all these shortcuts somewhere immediately noticeable on the Apple forums? I knew scads of them from OS9 and earlier, but the lack of problems in OSX have made me complacent and therefore vulnerable.
    Joe

  • Adding system to Startup Disk Preferences

    I recently erased my windows partition and recreated it (so I could make it bigger) however it no longer shows up in the Startup Disk System Preferences. I can only boot to it by holding down option on start up and then it appears. How can i get it to appear in the Startup menu like before?

    Hmmm, that could be the reason - using Winclone to restore the old Windows system rather than reinstalling. But this is just a guess on my part.
    You might consider using the Startup Disk control panel installed in Windows with the driver installation. Select the Windows system and reboot. Then use it to select the OS X partition and reboot into OS X. Then see if it shows up in the OS X preferences - Startup Disk.

  • Windows not showing up in Startup Disk

    Just updated a 15" Retina to 10.8.3 and also ran the SMC 1.1 update. Now my bootcamp windows partition does not show up in the Startup Disk any more. I can see it in the Finder and I can reboot and hold down option key to boot into Windows, but for some reason it isn't showing up in Startup Disk Preference.

    yeah, I had a feeling it might be Tuxera causing it, wanted to see if there was another solution other than uninstalling it.
    I tried disabling it in the pref pane and that didn't fix the issue, so I'm assuming it would need to be uninstalled.
    As long as I am able to boot into Windows when needed (which isn't very often), I'm not too concerned.  Its a little inconvenient to have to hold Option during startup to do it, but it works.
    Whats annoying too is that when using BootCamp control panel in Windows to restart into OSX, it boots into the emergency partition for Lion instead of Lion.  So, guess holding Option at startup is the only option both ways!
    Thanks for the help.

  • External drive shows in finder as a CD & no longer shows as "Journaled", after accidental unplug

    I accidentally unplugged two external drives while using them.  (I know, I know! Tugging on the wrong wire at the wrong moment...)
    The result:
    One large external hard drive now shows up in finder as a CD (i.e., shows on desktop as a mounted CD not as a hard drive).
    The same external drive no longer shows formatted as "Journaled" in Disk Utility.
    (The second external drive still shows up as an external hard drive on the desktop, and still shows up as Journaled in Disk Utility.)
    Questions:
    Is the damage to the external drive itself (so that finder thinks it is a CD, and is not Journaled), or to some information on the Mac?
    Can this be safely repaired in some way, or must I reformat the external drive and restore its content form a backup (yes, I have one!, but it will take a long time to do.)
    Thanks!

    Once I got hold of my offsite backup I could boot from that, and discovered that the external drive showed as fine, i.e. passed disk utility, showed as journaled, etc., and looked normal, while it was Macintosh HD which had numerous errors beyond the ability of Disk Utility to correct.  Restoring Macintosh HD from backup has fixed everything.  Odd thing, the way running Disk Utility from the damaged partition showed such anomalous results for the external drive.
    Thanks for your help!

  • Bootcamp not showing up on startup disk after upgrading to Yosemite. :(

    So after i've upgrade my macbook to Yosemite, bootcamp window won't show up when i hold on to 'alt' key during the start up. The bootcamp window also doesn't shows up in the startup disk in system preferences. Tried removing windows 7 and re-install again but it still doesn't work. So Please help me fix this

    1. How was Windows 'removed'?
    2. Please post the output of the following commands using Applications -> Utilities -> Terminal. Enter your password when prompted.
         a. diskutil list
         b. diskutil cs list
         c. sudo gpt -vv -r show /dev/disk0
         d. sudo fdisk /dev/disk0

  • Macintosh HD boot drive doesn't show up as Startup Disk (but boots fine)?!?

    Hi,
    My main internal bootable disk (Macintosh HD) does not show up in Systems Preferences > Startup Disk. If I want to boot from it, I have to either hold down the "Option" key at startup (and the disk appears fine, so I select it), or I have to wait for the machine to explore all other boot options before it finally resorts to booting from the internal Macintosh HD.
    I cannot simply select "Macintosh HD" from the Startup Disk preference pane.
    I have already tried repairing permissions, and I did a "Verify" in Disk Utility - everything checks out fine.
    I even replaced the StartupDisk.prefpane file from another disk, but no improvement.
    How can I get my hard drive to show up in the "Startup Disk" preferences?
    (I should mention that this is a new hard drive that I just installed by cloning it from another bootable drive). The other bootable drive shows up fine in the Startup Disk prefs.
    Help would be greatly appreciated!

    The Partition Map Scheme is currently set to "Master Boot Record."
    What does this mean?
    That's normally used for Windows.
    Do I need to change it to GUID?
    Yes.
    How do I do that?
    You have to re-partition the drive, which means it will erase everything on the drive.
    Boot from the Leopard install DVD (hold "C" while booting), choose you language, then select Disk Utility from the "Utilities" menu. Select the drive (at the left, not the volume indented below it), and click the "Partition" tab. Set "Volume Scheme" to "1 Partition", then click the "Options" button. Select "GUID Partition Table", then click "OK". Enter a volume name, set "Format" to "Mac OS Extended (Journaled" and click "Apply".

Maybe you are looking for

  • Content Type error accessing WebService

    Hi I imported a webservice model. If I try to call the webservice in my WD application, I get the following error: Unaccepted content type (text/html; charset=iso-8859-1) Anybody seen this before? I'm on 6.40 SP8 BR Raphael

  • Crashing when opening mail with attachments (exchange server)

    Hi, I have a user using Mac OS X Mail with an Exchange Server. OS X Mail crashes when she opens an email with an attachment. Though it doesn't happen all the time, when it does crash there is an attachment with the email. Crash report below: Date/Tim

  • Drag and drop mapping UI element/functionality

    Hi All, we are searching for functionality, in which the UI should contain drag and drop mapping options. e.g. we have ztableA(cities) containing values: NewYork London Tokyo Moscow we have ztableB(countries) containing values: Russia UnitedStates Ge

  • Bluetooth Headset for MacBook Pro

    Hi, Got a new 15" MacBook Pro a few weeks ago and have been having issues with my Nokia bluetooth headset when using with Skype. It connects ok but there seems to be alot of static in the earpiece when in use. I understand that there are some issues

  • Requesting Exam #1Z0-001 Introduction to Oracle: SQL and PL/SQL paper

    I know this is not the correct place to put my request but i have tried all other places i did'nt got the response so i am posting here any one pls help me in givin the previous paper of above mentioned exam. Thanks in advance Koushik