XREF3 field not getting populated in BSEG table while posting MIRO

Hi,
     I have one query in MIRO tcode.I have activated xref3 field in MIRO tcode using enhancement LMR1MF6Q.Now when i try to post document with some values in xref3 field on screen ,value is not getting populated in BSEG table.Please tell me what else needs to be done to achieve this ?
any hint on this?
Thanks & Regards,
Soniya S.

Hi,
1.- According to SAP Note 904652 - MIRO: Different from FB60
https://service.sap.com/sap/support/notes/904652
MIRO is an independent Materials Management (MM) transaction that does not
claim to be the same as the accounting transactions (such as FB60 or FB01).
MIRO was developed to allow users to process vendor invoices within the
context of the MM procurement processes as simply as possible.
For this reason, among other differences, the field selection was limited
to the absolutely necessary. For example, the following fields from the
accounting document are not available in Transaction MIRO (this list is not
complete):
Reference key (BSEG-XREF1, -XREF 2, -XREF 3)
2.- SAP Note 1156325 - BAdIs in the Logistics Invoice Verification environment
https://service.sap.com/sap/support/notes/1156325
Have a look at badi MRM_ITEM_CUSTFIELDS.
This badi will create a new tab at item level in order to display the new fields.
I haven´t used this badi so i cannot talk from experience here.
Think twice before deciding.
Best regards.

Similar Messages

  • Workday field not getting populated in BAPI_ENTRYSHEET_CREATE

    Hi MM gurus,
    I am trying to upload service entry sheets using bapi's , i checked the note 420334 and its working fine now.But, i want to populate  the workday field also in the service entry sheets, but this field is not getting populated even if i enter this field in the test data directory.
    Can anyone give me the reason for this?

    Hi
    Are you trying to populate the workdays field using BAPI in SE37 transaction??
    If you are executing the BAPI in SE37 then the data would not get updated in database.
    You need to run the BAPI FM & another BAPI "BAPI_TRANSACTION_COMMIT" in sequence in SE37 to post the data in database.
    I hope this helps.
    Thanx
    Prasad

  • Fom field not getting populated

    Hi,
    I have a field in the form role(multi select field). The value of another field in the form 'abc' is depedent on role selection. I have a rule with a switch and case statements for this. In the rule i am using
    <Rule>
    <switch>
    <ref>role</ref>
    <case>
    </case>
    </switch>
    </Rue>
    I tested the rule and it's working good.
    Now i am calling the rule in the field 'abc':
    <Field name='abc>
    <block trace'true'>
    <Expansion>
    <rule name='xxx'/>
    </Expansion>
    </block>
    </Field>
    The prolem here is that, even after i select the role, this field is not getting populated. It is empty.
    Not sure what i am missing. Please help.
    Thanks,

    step1) when you are getting value in the field on which "abc" is dependent , how are you getting that value?you are getting this value in derivation or expansion???
    step2: write the code logic for field "abc" in Derivation instaed of expansion. That should help.
    Please let me know if you are still facing the problem.
    Warm Regards,
    G

  • Fields Not getting Populated in Queries on Multi Provider

    Hi All,
    Product class,Product form and Packet size from Zqn6x03 (ods) are not getting populated in Queries(Multiprovider). Our`s is Heterogenous Multi Provider
    Points will be awarded.
    Thanks in Advance....

    Hi xys redd,
    After checking all the options it is very much important to run a report "RSR_GEN_DIRECT_ALL_QUERIES" IN SE38.
    This is the report used to generate all the changes to reflect in BEx
    It will aolve your problem if am not wrong.
    Don't forget to assign points.
    Venkat

  • Foreign key fields not getting populated in datacontrol palette for EJB app

    Hi,
    I am quite new to ADF and EJB.I developed a jdeveloper application with JSF and EJB tiers.(I am using jdeveloper 10.1.3.5)
    For database the default HR database is used.I created the entities for the EMPLOYEES and DEPARTMENTS table.
    I also created a session bean and a data control for the session bean.
    I am having a JSF page that receives all the details of a new Employee and insert into database (i.e persistEntity)
    But the Employees constructor from the Data control palette is not populating the MANAGERID and DEPARTMENTID fields which are
    the foreign key constraints for the EMPLOYEES table and hence while trying to persist the entity
    with the auto populated fields an error message is thrown.
    If I used ADF BC instead of EJB then i could populate all the fields including MANAGERID and DEPARTMENTID.
    Is it possible to have two text fields for Manager and Department in the jsf to insert the Employee details with EJB as the Model?.
    If possible how do I bind the values of these fields to the Employees entity object in EJB.
    Kindly need your insights on this.
    Thanks,
    Guna.

    Hi,
    How are you using MANAGER_ID and DEPARTMENT_ID fields, are they exposed as Long (or some other numeric type), or did you map them on the entity, something like this
    @ManyToOne
    private Employee manager; // this by default uses the column named MANAGER_ID
    @ManyToOne
    private Department department; // this by default uses the column named DEPARTMENT_ID
    .... If you mapped them (which is the right way), when you create an employee you should set these attributes before persisting the entity, by using employee.setManager(manager) and employee.setDepartment(department). Then, the foreign keys get populated automatically by your persistence provider (Toplink).
    If you are using data controls, it is a little different process to set the department and manager, but you should take a look at this tutorial http://www.oracle.com/technology/obe/obe11jdev/ps1/ejb/ejb.html , it will hopefully answer a lot of your questions.
    Pedja

  • Change Pointers are not getting populated in BDCPV table.

    Hi All,
             I am trying to create IDOC for Activity type master - KL02 through change pointers. For that I have done following things.
    Message type - COAMAS
    1. Created Custom message type - WE81 - ZIN_COAMAS_TCSMOBILE
    2. WE82 - Config for Mess Type and Idoc type combination
    3. SCDO - Checked object type LSTAR and have required tables in that object.
    4. BD61 - Activated Change pointers - Generally.
    5. BD50 - Checked Active for ZIN_COAMAS_TCSMOBILE
    6. BD52 - Added fields for I want to create Change pointers
    7. BD60 - Message type and ref Mesage Type and function module config.
    8. BD64 - Created distribution model for my Message type
    After doing all this settings the change pointers are not getting created in BDCP and BDCPV tables.
    Note - The entries are going in CDHDR and CDPOS table for activity which i change through KL02 for class LSTAR
    Can anybody figure out what need to be done in this case?
    Regards,
    Gautam Joshi.

    Hi All,
              Solved the problem myself.
              In BD52 I have given
              LSTAR               CSLA         KOARS
              LSTAR               CSLA         LSTAR
              LSTAR               CSLT          KTEXT
              Here the data of activity are stored in TCLA and TCLT tables. So intially while doing config in BD52 I have given TCLA and TCLT table names.
              But I debugged the KL02 and found that change pointers are not created for TCLA and TCLT table. further looking into CDHDr and CDPOS table I found that for COAMAS message type in these two tables table name was CSLAB.
    CDPOS entry
    LSTAR                        
    3166442                      
    119512890                    
    *CSLAB*                        
    2003166442   2400123120000101
    KTEXT                        
    U                            
    --> BUT CSLAB is structure.
    After putting these entry in BD52 the problem solved.
    LSTAR     CSLAB     KOKRS
    LSTAR     CSLAB     KTEXT
    LSTAR     CSLAB     LSTAR
    Regards,
    Gautam Joshi.

  • PKUNRE field not getting populated in 2LIS_13_VDITM after ECC upgrade

    Hi,
    We are seeing blank values for PKUNRE / 0BILLTOPARTY during extraction from 2LIS_13_VDITM.
    We are experiencing this issue after ECC upgrade which went live recently.
    We have applied note 580694  to correct missing fields in the billing extractor.
    This field is sourced from VBPA/VBRP.
    Our functional teams confirmed that VBPA/VBRP are updated properly and there seems to be no timing issue.
    However, the record is landing in PSA with blank BILLTOPARTY.
    Where could the problem be?
    Is there any thing we missed?
    Can any one throw some light if you have experienced this kind of an issue after upgrade.
    Thanks a ton in advance,
    Sandy.

    Hi Sandy:
        In my system I didn't find the Field PKUNRE on the VBPA / VBRP Tables, so my guess is that you're dealing with a Custom Enhancement, if this is the case the SAP Note 576886 - "Change to user-defined fields not extracted" might help you in solving this issue.
    Regards,
    Francisco Milán.
    ***Follow up note:
    I double checked and found the Field PKUNRE on the Extract Structure for 2LIS_13_VDITM (using Transaction Code LBWE) so now I know that you're working with a Standard field and not with a custom ehnancement, the SAP Notes below address a similar issue to yours but they are related to Applications 11 and 12, not for App 13. I apologize for the confusion.
    Note 621684 - "Fields PKUNRE and PKUNRG are not filled from delivery"
    Note 379237 - "BW Content LE-SHP: missing partners in 2LIS_12_VCITM"
    Edited by: Francisco Milan on Jan 28, 2011 12:54 PM

  • M204 field not getting populated in VA01

    I have to map order number to M204 field according to requirement using ORDERS05 Idoc and i am using EXIT for it.
    .but that field does not come during creating sales order.
    If I try to modify BDC DATA and try to append that field it says that its not an input field.
    What can be done???

    Hi,
    1.- According to SAP Note 904652 - MIRO: Different from FB60
    https://service.sap.com/sap/support/notes/904652
    MIRO is an independent Materials Management (MM) transaction that does not
    claim to be the same as the accounting transactions (such as FB60 or FB01).
    MIRO was developed to allow users to process vendor invoices within the
    context of the MM procurement processes as simply as possible.
    For this reason, among other differences, the field selection was limited
    to the absolutely necessary. For example, the following fields from the
    accounting document are not available in Transaction MIRO (this list is not
    complete):
    Reference key (BSEG-XREF1, -XREF 2, -XREF 3)
    2.- SAP Note 1156325 - BAdIs in the Logistics Invoice Verification environment
    https://service.sap.com/sap/support/notes/1156325
    Have a look at badi MRM_ITEM_CUSTFIELDS.
    This badi will create a new tab at item level in order to display the new fields.
    I haven´t used this badi so i cannot talk from experience here.
    Think twice before deciding.
    Best regards.

  • Custom field not getting populated in the "Show Results where" drop down

    Hi all,
    In appointment detail page by clicking on Add button on the user related information section , it takes us to a search layout showing the list of available users.
    Here we have to filter the user's based on a custom field which has already been created in the user object. But I am not able to add the custom field in the "Show results where" drop down for which the search has to be done.
    It is getting reflected in the normal search layouts.So Can any one tell me why the change is not getting reflected in the user related info search layout?

    I tested your use case and you are correct. I would recommend that you submit a service request to CRM On Demand customer care in reference to this issue.

  • Functional Area field not getting populated in the AUFK table

    Hi Friends,
    The table AUFK is the table for Internal Order master data.
    The issue which we are facing is:
    In a particular Order type, the field 'Functional Area' is suppressed in the field status group for the order master data.
    But the cost centers which are maintained in the order master has the functional area field populated with value.
    In the table AUFK, the functional area field is populated for some internal orders and not populated for others. In all cases it should pick the functional area from the cost center which is maintained in the internal order.
    Please guide us about what can be the possible reason(s) for populating the field in some cases while not populating in other cases.
    Thanks a lot in advance for your help.
    Regards,
    Shilpi

    Hi,
    maintain the functional area in order master data to ensure 100% functional area is available in AUFK.
    I can't tell you the reason why its sometimes appearing and sometimes not bur FUNC_AREA is not picked from responsible/requesting cost center (from master data).
    If in customizing of internal order order types a "model-order" is assigned with maintained functional area, this func_area is taken if you create a new order for this ordertype.
    Best regards, Christian

  • Custom field not getting added into MSEG table throuhBADI  MB_MIGO_BADI

    i have created a new tab in MIGO transaction and created a zfield called ZZcert . i have also created one append structure in MSEG table with field name ZZCERT .
    i have created new tab for migo using BADI MB_MIGO_BADI . when i enter value in ZZCERT in MIGO transaction , it is not updated in MSEG table .  but in debugging mode im able to see the value in  (SAPLMIGO)MSEG . i have tried the option of using Field symbols also . but it didnt work .
    I have searched in the forum for suitable answers.
    can anybody guide me how to update the ZZCERT value into MSEG table ??
    thanks in advance
    pavan

    Hi,
    if i am not wrong these are standard transactions..when you have created a screen  then for your field you can click on "get from dictionary" and the map your field(drag a field from MSEG directly on to the custom field on screen) and the you have to activate the screen....i think thats the only thing you need to do so as to update the field value in database...
    or else as sugegsted by the post above you need to use BDC recording to update the databse table MSEG.
    Abhijeet.

  • CProjects dash board fields not getting populated

    Hi
    Currently using cProjects 4.0 on ECC6.0 server.
    Facing problem for dash board data. Have created the project in cProject. Completed all the tasks, phases and project header also. I want actual start and actual finish date data to appear on the dash board.
    For evaluations I have done following settings:
    Activated Use Dashboard for corresponding project type ('Define Project Types' under 'Evaluations' and 'Dashboard').
    Specified when evaluations are executed as : Only with background processing ( 'Define Project Types' under 'Evaluations' and 'Dashboard').
    Assigned the extract layout to the corresponding project types for the dashboard evaluations
    Other settings:
    Transaction SPRO -> Collaboration Projects -> Evaluations -> Define Extract Layouts
    extract layour here is 0_DASHBOARD, attributes for this extract layout selected as Actual finish, actual start by checking the box of Always extract
    But I am still unable to see the dates in the Actual finish and Actual start fields on the dash board for the project of that project type.
    secondly,
    Currently Actual start and Actual finish fields are hidden, I make them to displyed column in the settings, but whenever I leave the the home page and again come to home page these fields are again going to the hidden column. I want them to be shown permanently.
    Please help on the same.
    Thanks and Regards,
    Niraj Sikligar

    hi Yogesh,
    I did the same as mentioned by you.
    Now I am getting following error message:
    Error when processing your request
    The following error text was processed in the system EC6 : Property GROUP_AGGREGATION with the value X is not allowed for key figure (PRIORITY)
    Any Solution?

  • Tax Field not getting populated

    Hi SAP SD Gurus
    I am calculating tax with condition type MWST. In the pricing procedure the tax is getting calculated. The Tax Amount is also getting deducted from the Net Amount. But, on the Conditions Tab Page of Item Details, it is not displaying the Tax Field (KOMP-MWSBP) below the Net (KOMP-NETWR) Field.
    Thanks & Regards.

    Hi,
    Plz check if you have input the plant name in the shipping tab at item level.
    Without putting the plant name,tax (MWST) will not be visible in the conditions tab because there is a routine set in the pricing procedure against a tax condition.
    Reward points if it helps.
    Regards
    Karan

  • Total Settlement Value field  not getting populated in IW38  Transaction

    Dear all PMCS group Members,
    I have a list of  Maintenance Orders on which  Actual Costs are posted and also periodic settlements done before TECO.  When i list these Maintenance Orders in IW38 transaction the system is bringing in the values in  Total Actual Costs column  but  not the Settlement values in Total settlement column which i need to cross check before i do mass TECO. 
    Your help will be greatly appreciated.
    regards,
    rajaraman.

    Dear Rajaraman,
    You can see the Total Settlement values by using tcode IW38.
    ---> Goto IW38
    ---> Execute the Report for selected Orders
    ---> Click on the Current Tab or Press CTRL+F8
    ---> Select the Column of Total Settlements and Actual Settlements
    ---> Click on the Save Button... it will ask you to enter the Layout... Enter it and hit Enter
    Your Required Fields will be Displayed.
    Regards
    BK

  • Fields not getting populated when a particular selection not given

    Hi!
    In my query when I run the query with the a particular sleection having contract and the dates it show sme a list of the contarct items and its sales prive , quantiy and estimated sales price ect, but in the output there are some contracts for which the sales price and the estimated sales price dosent show up , but simultaneousely I run the same query putting in the selection screen with same contract number and dates as well as a filed activity type giving its range the items that we not showing the sales price and estimated sales price now shows up on the output. Can anyone tell me why does the query dosent show the sales price and estimated sales price when the activity type range is not given and shows the price for all when activity type range is given. On teh first run it does show for few but not for all but on second insatnce when I enter the activity type it shows for all.
    Thanks

    Thats what when I make a sleection on teh selection screen excluding the activity type and run it dosent display the sales price and estimated sales price for few contracts but when I enter the activity type for those particuoar contarcts in my selection screen and run it does show me the sales price and the estimated sales price. I am not sure which part for the query you want to see, please let me know so that I can send that particular part .
    Thanks

Maybe you are looking for

  • Cannot restore iPhone from backup on Windows 7 64-bit PC

    I keep getting this error message when trying to restore my iPhone: "itunes could not restore the iphone (phone name) because the backup session failed". i have deleted the previous backup, did a manual backup, and still get this message. I have an i

  • Manual G/L postings for COGS in third party sales

    Hello, I have a scenario where we have the COGS G/L which is blocked for Manual postings. Now in case of a Third party sales scenario when the PO is created from the Sales order it is a account assigned PO so the G/L determined from GBB- VAX is the C

  • Preview not opening new pages documents after Yosemite upgrade

    Just upgraded to Yosemite and also upgraded Pages to 5.5.  Created a new Pages document and now, in Finder, the preview does not work.  If I control click on the pages file and select open with Preview I get an error "The file "XXXXX.pages" could not

  • Manually manage videos or workaround help please

    I have some videos on my iPhone, but I don't have much hard drive space left on my computer so I would really like to move the videos that sync to my iPhone from iTunes to an external drive to free up some much needed gigabites. However if I do this

  • Problem with load balancing on CSS

    Hi, we have a pair of servers that are load balanced for port 80 traffic to 198.x.x.21 using the h_www_tcp:80 content rule . I recently got a request that port 80 traffic directed to 198.x.x.21/apps/auction be directed only to one of the load balance