Xsan 1.2 New Test Results

I posted a pretty nasty message the other day, but Xsan 1.2 is a completely different beast went it is running on 10.4.3 on all of the machines.
But between yesterday and today I have completely started from scratch on all of my test machines, built them up to 10.4.3 MDC's and Client, installed Xsan 1.1 and then upgraded to 1.2, recreated my Xsan Volume from my existing Luns. This 10.4.3 test environment is much happier.
In the little bit of testing I have completed so far, secondary permissions are working, Read Only Quicktime files still don't play, but if you make the QT files Read/Write and put them in a Read only Folder, they will play. This is big deal for two reasons, number 1, because you can get Protected QT Files to play and because you can actually protect your files from being deleted or overwritten (which is the way it is suppose to work, but prior to 1.2 it didn't).
I have only performed a very basic test here, so don't base any major decision on this post. Well except, it might be worth your time to create a 10.4.3 test bed for all of your machines. To see if your tests are positive.
I have not tested the Searching issue yet. I will let you know.
Good Luck
Kalagan

Kalagan,
Have been following yours and various other posts here and on xsanity. I have the same problem and it is driving me insane (xinsanity more like). I have a very simple xsan arrangement 2 xserves acting as AFP NAS front ends and 2 G5's acting as Primary and Secondary MDC's. It is supposed to be our new Data Centre but as yet - I can't get ANY machine to search on the AFP shared volume and give me a result. OS9 takes about 15 minutes and is hit and miss. OS X (10.3.9 and 10.4.3) just return 0 hits unless you are in the actual folder where the file is at which point it does actually bother to acknowledge it's existance! In a data centre model with hundreds of thousands of files, this is kinda important but maybe it's just me!? I will say this though for xsan 1.2 - it has at least allowed me to change permissions without any clients either getting their knickers in a twist or seeing nothing. If ACL's worked it would be great but at least I have something akin to 10.3.9 perms.
Re Install of 1.2. I followed the same proceedure as you and it did all appear to go through ok?? I have also up'd the RAID to 1.5. Not sure if that made any diff but from a reliability point of view, so far, so good. It would appear to throw up less errors in the san log than 1.1. If I can tell you anything specific about my config that might help - let me know. My system is non-live so short of dropping it off the top of a rack to see if it still works, I am in a position to test just about anything so long as the blasted thing works by the end of Feb installation date I have!!!!!
Any help on the search issue - please please please let me know anyone!
Oli

Similar Messages

Build model - view test result - i have no ROC tab

Dear all,
When I build eg. a classification SVM (Lin.Reg, Naive Bayes)) model and view the test results, in that window I have only these tabs: Performance, Performance Matrix, Lift, Profit. I have no Roc tab. Do you know why? Before I used SQL Developer 3.2.09.30_x64 with this problem. Now I use SQL Developer 3.2.20.09.87_x64 with this problem. When I try to tune the SVM algoritm (so not let it automatic), there are only these tabs: Cost, Benefit, Lift, Profit. But not ROC tab :(((
When I use the old Oracle Data Miner software from 2011, version 11.1.0.3.0 (build 11705) connecting to the same database server (using the same account), and I build a classification SVM model, I have ROC curve.
Can anyone help me to solve this misterious problem?
Than you!!!

We don't have "preferred target value" during model building in the new data miner. However, you can use the Transform node to transform your target into 2 classes (preferred target value and others). You then use the output from the Transform node as input source for your model build.
Here is a process to transform your target into 2 classes:
- Create a Transform node
- In Transform node, select the target column, click "Add Transformation" icon on the toolbar
- In the Add Transform dialog, select "Custom" Binning Type, click "Generate Default Bins" button (accept default settings)
- In the "Custom bin values" listbox, remove the non-preferred target values (select the values and click the "Remove Transformation" icon on the toolbar)
- Now, you should have one preferred target value in the "Custom bin values" listbox, click OK to finish
You can now connect the Transform node to a Build node. In the Build node, select the transformed target (it should have the "_BIN" suffix in the name) as the Target for model build.
Hope this help!
Denny

Install new Test Qestion Items in TestAuthor (Authoring Environment)?

Hi everyone!
Does enybody know, is it possible to add new (external) test question types to the existing ones in test author (Authoring Environment).
I would like to add some other question types eg.:
-define order of possibilities;
-choose the most fiting behavour or attribute;
Now there are the following test and rating types: MC (multiple choice) MR (Multiple choice item with two or more right answers), MR Explicite (Multiple choice item with two or more right answers, where the participant is required to make explicit decisions) Fill-in Item (Item with open answer) and Rating.
So is that possible to add NEW test question types to Test Author and also LSO(because later I'd like to play evaluate and collect results of the tests in LSO)
Regards A Heger.

Hi Andras Heger ,
Presently its not possible to add new templates...
as you cannot configure any things while setting up new type of questions.
Those five are the supported levels..
Thanks and Best Regards
Moyeen

Import the test results and doors links back to doors with NI Requirement Gateway

Hi together,
I will try to explain my problem:
We are using TestStand, DOORS and the NI Requirement Gateway.
We created a test specification in DOORS, TestStand used the DOORS IDs to connect the TestSteps in Teststand with the requirements in DOORS.
TestStand runs the test and creates XML-results, the NIRG is able to import these XML-results back to DOORS and creates a new(!!!) DOORS module, parallel to the said test spec.
This module contains some attributes like the single test steps, the results (pass,fail, whatever, ...) but now I am missing a relationship between the DOORS test specification and these results of the XML file or better, the XML-import in the new DOORS Module.
We want to manage our test results only(!) in DOORS so it should be possible to link(!) automatically the results of the XML to the DOORS TestSpec cause we are able to transfer the DOORS-IDs or other attributes (i.e.. The "un"unique NI ID#") too!
in ASCII-art:
DOORS_TestSpec -> NI_TestStand -> NI_Result -> DOORS_Result <--------- with LINKS to the DOORS_TestSpec!!!!!!!!!
Next Step is the DOORS Analyze Tool but we need the links to follow them and to show us the results.
Would be nice to know if somebody else knows the problem or perhaps someone has an other solution. Thanks for your time!
Greet

Regarding your statement "We will generate a chunk of XML-Results, so we are not able to link all the requirements by hand", are you concerned about having to update the path to the XML files each time you run the test? In this case, I would recommend creating a directory to store only the most recent report (the report path can be modified in the TestStand report options), and set the XML report project in Requirements Gateway to point to this directory. In your TestStand sequence, you could call code which moves the previous report file into a backup location so that only the newest file is in the specified directory. THis would prevent you from needing to modify the Requirements Gateway project to access the latest report; reanalyzing would reload the project with the new file. The traceability information will therefore always be up to date, and you can see that the DOORS requirements are being covered by the test results.
I agree that there is not really a good solution for importing the XML reports into DOORS, but I think you can acheive the result you are looking for using the report files directly.
Al B.
Staff Software Engineer - TestStand
CTA/CLD

AVK test results

I am new to Using AVK for my JSP web Application.
My Environment:
jdk1.4
Struts 1.2
hibernate3
OC4J 10g (9.0.4)
SQL server2000
LDAP
Plum tree portal.
I am new to using AVK.
I need to generate AVK test results for my Customer requirement.
Where Can i get information ?
What are jars i need to download ?
Raghu

Ideally, I'd like to find a test plan and/or results from the test plan. I've found reference in the Java platform specification indicating that it
"satisfies all testing requirements available from Sun relating to the most recently published version of the Specification six (6) months prior to any release of the clean room implementation or upgrade thereto..."
but I have not found what the testing requirements are that have been satisfied. Any ideas?
Many Thanks,
-E

How Can I change the Directory and Name of Coded UI Test Result html file

I'm Using Visual Studio 2013
Now I can find the Coded UI test result html file insde the following path
TestProjectFolder\TestResults\2015_01_22_05_59\In\anotherfolder\MyMachineName\UiTestActionLog.html
VS2013 enables editing the name structure of this folder only (2015_01_22_05_59). and it should contains a static name+DateTime (Using the Project TestSettings).
I need to (Programatically)
Collect all test result html files on one folder with the project name (Change the path of the test result file)
Put the testcase name on the result file name (for example : TC13505_ValidateScreenComponents_2015_01_22_05_59)
If possible,Programatically attach the html result file to the test case attachements
More Details:
I need to set a custom valus for (ResultsDirectory -
TestLogsDir -TestResultsDirectory
- TestName) on the runtime.
please if any onw know how to do the previous tasks
by code, please share your knowledge.
Regards, Ahmed Elgazar Skype:A7medelgazar

Hi AhmedElgazar,
Thank you for posting in MSND forum.
As you said that you want to collect all test result html files on one folder with the project name by programmatically way to change the path of test result file in coded UI test.
As far as I know that when we run a coded UI test every time, it is default that there will create a new folder to save the new UITestActionLog.html.
So we could not change the path of test result file and collect all test result html files on one folder in VS IDE.
At present, there have no way to collect all test result html files on one folder and change the test result file path.
In addition, I know that we can change the TestResults folder using mstest.exe in command line.
Reference:
https://social.msdn.microsoft.com/Forums/en-US/58d3d2a6-1a45-41ba-9afa-12d087c7c661/how-to-change-the-test-results-path-of-codedui?forum=vstest
If you still want to this feature, I suggest you can submit this feature request:
http://visualstudio.uservoice.com/forums/121579-visual-studio. The Visual Studio product team is listening to user voice there. You can send your idea there and people can vote. If
you submit this suggestion, I hope you could post that link here, I will help you vote it.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How Do You Store Test Results

OK, so this is really sort of a survey. I'm developing a new test system and am toying around with how to store the data. Obviously one alternative is to use TestStand's built in database capability, but in looking at the tables it seems like post-processing could be a bit of a pain (it's not instantly obvious to me how I would author the proper queries, etc).
Another alternative would be to create my own database and then figure out how to get all of the hooks in the proper places to make sure that data is properly stored when it should be, etc. This could result in some fairly complex database design, teststand foo, etc.
So I'm wondering what the community as a whole seems to favor: Use TestStand's built in database stuff or roll your own?

I've tried several different methods like individual DUT text files, appended text files, databases, and such. The best method I've come up with is using a text data file with comma delimiters. The catch is to log each DUT data as a two dimensional data. The first columns of each line contian DUT header information such as serial number, date tested and such. Then a test column, name, and p/f. After that each result that relates to that test is added for each column. It takes on the following format.
dut1,date,sn,operator,test,0,p,r1-LL,r1-MV,r1-UL,r1-p/f,r1-description,r2-LL,r2-MV,r2-UL,r1-p/f,r2-description,...etc
dut1,date,sn,operator,test,1,p,r1-LL,r1-MV,r1-UL,r1-p/f,r1-description,r2-LL,r2-MV,r2-UL,r1-p/f,r2-description,...etc
Then then next DUT will be
dut2,date,sn,operator,test,0,p,r1-LL,r1-MV,r1-UL,r1-p/f,r1-description,r2-LL,r2-MV,r2-UL,r1-p/f,r2-description,etc
dut2,date,sn,operator,test,1,p,r1-LL,r1-MV,r1-UL,r1-p/f,r1-description,r2-LL,r2-MV,r2-UL,r1-p/f,r2-description,etc
A little wasteful on memory, but memory is cheap. The advantage of doing it this way is you can pull into a spreadsheet program, then insert blank line at top, and then insert the data autoformat. Now you have a simple database without the overhead of the database. A couple a seconds and anybody of any skillset can pull up the data and it makes sense. I also divide the files into logical sizes such as work week, quarters, or year so the data files don't get too large. I've looked a data management programs as well. They are nice if you want to invest the time to understand what's going on. Problem is, most people viewing the data files want information fast when they need it. They are not willing to invest time to install special programs and invest the time to get the information they need. Just some thoughts.

Ridiculous Download Times on Reader Extended Docs (test results included)

I've been receiving complaints from clients about extreme download times (up to 30 minutes to view a 150MB file on a 20 mbps connection). So I decided to run some tests to see if this was being caused by a configuration issue, or something easy to resolve. (Testing results at the bottom of the page)
A little background info: Our core business utilizes pdf documents that have been enabled for shared review, reader extended, and then displayed within the browser. So I decided to take the same 50MB test file and create 4 versions of it. The original, one that was just reader extended, one that was just enabled for shared review, and one that was enabled for shared review AND reader extended. I then tested in 3 browsers, IE9, Firefox 3.6.17, and chrome 11.0. I used Reader X in all of the testing.
What I found out:
IE uses an active-x version of reader to display within the browser. This is the only browser in testing that used the active-x version and it does support streaming the file so that you can start working on the first page while the rest of the document is still downloading. BUT when a document is reader extended this feature does not work at all. You have to download the entire document before you can do anything. The viewer essentially freezes until it finishes downloading. Downloading in this psudo streaming method, it downloads MUCH slower. I'm talking 5 minutes to download a file that only takes 45 seconds if you click "Save Target As".
Firefox and Chrome both use the Plug-In version of the reader to display within the browser. This version does not support streaming of the file and instead forces you to download the entire file before viewing (even for non reader extended docs). The good news here is that on a Reader extended document, since it's not trying to stream the document it downloads much faster (more like 90 seconds for the same file that takes 45 seconds to download if you click "Save Target As").
I would tell our clients to use FF or Chrome, but that's in the hands of the IT departments, and most are using IE. As you can see the Active-X version of the viewer has by far the worst performance by far, and it's completely unbearable on files that are over 100 or 150MB. It would be nice if someone at Adobe could address this serious performance issue. I've even tried setting Fast Web View off and Speculative Downloading off, but the Active-X version still tries to display the first page and then stream the rest which results in a 3-5 minute download that should only take 45 seconds.

The only way it can get fixed is if you report it to Adobe. Posting it here may not be sufficient. There is an Acrobat feature request forum here and a bug report form here: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Tom's Hardware released USB 3.1 testing results on MSI X99A GAMING 9 ACK

Tom’s Hardware released a test result of MSI motherboard and USB 3.1 device. It mentioned that there is an ASMedia ASM1352R controller on X99A GAMING 9 ACK to support two USB 3.1 ports on I/O interface.
http://www.tomshardware.com/reviews/usb-3.1-performance-benchmark,4037.html
X99A GAMING 9 ACK, expected to launch in Q1 2015.
USB ports on MSI X99A GAMING 9 ACK
Testing Platform
Results: USB 3.1 VS. USB 3.0
ASMedia is the only company ready with USB 3.1 and Intel isn’t planning to build the technology into its chipsets any time soon. Neither Broadwell’s nor Skylake platform supports native USB 3.1. Moreover, MSI is the first company to announce its motherboard with USB 3.1 feature. MSI X99A GAMING 9 ACK will undoubtedly be a $400+ motherboard like X99S GAMING 9 ACK before it. Any users who want to enjoy the newest technology can choose MSI X99A motherboard to have the best using experience.

I dont think the usb 3.1 drives ready now, but it's nice to see msi moterboard get this new feature.
I think the type-c usb 3.1 will be use on the mobile device for sure!

Load Test Results - time series request data for by URL in VS2013

I am trying to figure out how to export and then analyze the results of a load test, but after the test is over it seems I cannot find the data for each individual request by url. This data shows during the load test itself, but after it is over it seems
as if that data is no longer accessible and all I can find are totals. The data that I want is under the "Page response time" graph on the graphs window during the test. I know this is not the response time for every single request and is probably
averaged, but that would suffice for the calculations I want to make.
I have looked in the database on my local machine (LoadTest2010, where all of the summary data is stored) and I cannot find the data I'm looking for.
My goal is to plot (probably in excel) each request url against the user load and analyze the slope of the response time averages to determine which requests scale the worst (and best). During the load test I can see this data and get a visual idea but when
it ends I cannot seem to find it to export.
A) Can this data be exported from within visual studio? Is there a setting required to make VS persist this data to the database? I have, from under Run Settings, the "Results" section "Timing Details Storage" set to "All individual
details" and the Storage Type set to "Database".
B) If this data isn't available from within VS, is it in any of the tables in the LoadTest2010 database where all of the summary data is stored?
Thanks
Luke

Hi Luke,
Since the load test is used to
simulate many users accessing a server at the same time, it is mainly verify a wev server load stress.
As you said that you want to find the data
for each individual request by url, I know that generally we can analyze the url request from the Summary like the following screen shot.
>>I
have looked in the database on my local machine (LoadTest2010, where all of the summary data is stored) and I cannot find the data I'm looking for.
I suggest you can try to add the
SQL Tracing Connect String in the Run Setting properties to trace the data.
Reference:
https://social.msdn.microsoft.com/Forums/en-US/74ff1c3e-cdc5-403a-b82f-66fbd36b1cc2/sql-server-tracing-in-visual-studio-load-test?forum=vstest
In addition, you can try to create an excel to analyze the load test result, for more information:
http://msdn.microsoft.com/en-us/library/dd997707.aspx
Hope it help you!
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Using firefox 14.0.1. Loading a link using right-click and "Open Link In New Window", results in new window opening but address bar does not show URL..

Using firefox 14.0.1. Loading a link using right-click and "Open Link In New Window", results in new window opening but address bar does not show URL. However, if I right click on a link and select "Open Link In New Tab", the Tab shows URL in address bar. So it's working when it's a New Tab but not a New Window.

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

I want to write a program in LabView then pass the test results to teststand to check if it pass or fail without displaying the test stand program,

I want to write a program in LabView and create an execute but I want to be able to pass test results to test stand to find it the unit pass ar fail the test then save the data to a database. How would i go about it.

What's confusing is your statement that you want to do this "without display the test stand program". You can minimize the TestStand UI to the task bar but if you don't want TestStand to be running, how can TestStand evaluate the result. Explain a little more please.
In the message body of your post, you just say you want to create a LabVIEW exe and pass the results to TestStand. What I would recomend is that instead of an exe, you create a dll and use TestStand's DLL adapter to call it and return the results. TestStand will evaluate it and do the logging.

How to view the emma coverage test result when running local job

Hi Guys,
When using emma in DTE, we can obtain the code coverage test result. I submit a farm job, and can get a txt or html file on coverage report. But when I run it locally, the txt / html files is unavailable. I can only see a folder named coverage with coverage.emma & metadata.emma. So my question is how can I get the coverage report from it?
If I can use some command to generate report files, then what is it and how to run it.
Thanks

Hello Twenz
This forum is mainly (should not be only but it is) used for supporting Oracle Application Testing Suite (OATS) products.
I guess your question is not related to this solution at all. So maybe this is not really the right forum.
Good luck
JB

Generating a test result without a module

I have a basic question about generating a test result without calling a module in TestStand.
For example, I do a pair of read operations from a product and return the results to a pair of numeric local variables. Now I want to do a sequence pass/fail or numeric limit test based on these two values. The results are already available and I can do a function step to test a result, say from a basic math operation. But I can't create a pass/fail result from a function step. I've gotten around the issue by creating a dummy module that has no function other than to allow me use the expression builder to assign a result to one of the step result items, but this sure seems stupid.
What am I missing?
Thanks,
Dave
Solved!
Go to Solution.

Do it in the Pre-expression.
Use the <none> adapter as suggested and place down a Numeric Limit Test step. Then in the Pre-Expression put something like this:
Step.Result.Numeric = Locals.A - Locals.B
If you look at the Data Source tab you will see the variable which gets evaluated and compared against the limits.
In fact if you wanted to you could avoid the Pre-Expression and just put your calculation in the Data Source Expression:
Locals.A - Locals.B
You can set up the Limits on the Limits tab for that step.
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

SCOM 2012 - Visual Studio Web Test - Cannot retrieve downloaded test results / share not configured

Hello-
I am trying to get my Visual Studio web test to work in SCOM 2012. I have configured the run-as account, and set the correct overrides for the Alert attachment file share discovery. I followed this guide to the T: http://technet.microsoft.com/en-us/library/jj899889.aspx
When I Select the site that I want to download the test result file for, The results pane shows the following error:
"The share does not seem to be configured in the Alert Attachment Management Pack"
When I attempt to download the result file without manually entering creds, it fails. When I do enter creds, in the "task history" it shows as succeeded, but I get no results. All subsequent automatic "Retrieve previously..." fail. In
the "task history", the "Run As" column is blank (unless I manually enter the credentials, which doesn't do me any good, anyway)
My "Alert Attachment" MP is inside another MP I created, along with the "System Center Global Service Monitor VS Web Test" MP and two other System Center MPs. This created MP is the one that my Alert Attachment Overrides are attached
to.
My Run-As account has the needed permissions to the file share, so I am lost as to why this isn't working. Any help would be greatly appreciated.

Have you followed the steps here to configure the share location http://technet.microsoft.com/en-us/library/jj899889.aspx ?

Xsan 1.2 New Test Results

Similar Messages

Maybe you are looking for