XServe 10.6 SL Setup Assistant Fails

Hello All,
Been hacking at an XServer 2,1 (Early 2008) box for the past 18 hours or so straight attempting to do a clean reinstall from L to SL Server. Each round I have cleared (repartitioning to be certain) the system drive (raid) and performed the default install. Each time I reach the Network pane of Setup assistant it returns a fairly generic message regarding "An Error occurred. There was a problem configuring your network services. Please inspect you network settings and try again." and fails to continue.
Currently in the Network applet I have 2 Eth interfaces (1 connected, 1 discconned) and 2 LOM interfaces and 1 Firewire and have probably tried every combination of setting interfaces to inactive / static / dhcp etc.
From the poking I did it seems that DHCP / DNS is generally the culprit and the existing windows dns on the network was a bit of a mess. Setup a Ubuntu server in VMWare with fairly straightforward setting for both and the SL install seemed to hear and incorporate them.
Only work around so far that I have come across is to manually set the .AppleSetupDone bit via SSH, the serial # via Server admin, and reboot past the setup assistant. Logging on with root and the 8 digit serial then works, but it seems like the machine is at least partially gimped.
Also tried disconnecting the server from the network for the setup and alternatively isolating its port in VLAN. Tried install disks for both 10.6 and 10.6.3.
Left the install on the Network pane overnight and returned to two error dialogs over top of it.
"Refreshing connection" "Failed to Authenticate to the server"
and
"Getting network interfaces" "Failed to authenticate to the server"
Had read some posts on the install acting wonky under 10.6.2 and seeing two ethernet instances on the same server as a serial number violation. But the installs I had attempted shouldn't have been 10.6.2 (10.6 and 10.6.3). And I had left the second adapter disconnected on each install so far. The install is trying to create an LOM interface on both adapters as well.
To note, this is a newly purchased SL Server install kit and the serial is completely legit and unused previously.
Figured this might be a long shot, but any ideas would be greatly appreciated. Trying to muster up the strength to use an old Airport Extreme and setup a mini network for the next install try (Just based on a number of the documentation examples coupling the install with an aiport and the hope there may be some inherent compatibility gain). Then again I am probably just overtired and getting desperate.
Cheers.
- Koof

Moved this post to the Snow Leopard Server Install Forum here:
http://discussions.apple.com/thread.jspa?threadID=2524842&tstart=0
Thanks for viewing.
- Koof

Similar Messages

  • HP Color LaserJet 2840 -- reinstalling driver -- HP Setup Assistant failing

    Hello! Any tips on how to get my MacBook Pro to identify my HP Color LaserJet 2840 printer? I'm trying to reinstall the driver, but in the HP Setup Assistant, the printer doesn't show up.
    I tested the same printer and USB cable on my older iBook, and everything works just fine. The printer is an all-in-one device, and it works just fine as a standalone copier.
    On my MacBook, everything worked great two days ago, but I tried to print today and got a message "printer not responding" in the print queue. I tried to troubleshoot to no avail:
    -- Turned printer and computer off an on several times.
    -- Ran disk warrior, rebuilt directories and repaired permissions. Still notta.
    -- Then uninstalled the HP 2840 print driver, downloaded new ones, tried to reinstall, but the printer isn't showing up in the HP Setup Assistant.
    -- In Printer Setup Utility, ran Reset Printing System.
    -- Again tried to run HP Setup Assistant, but still the printer isn't showing up in the list for installation.
    Any tips would be much appreciated! Thanks!

    Hi BDAqua -- Thanks for the tip. Should have thought of that. Apparently my USB ports aren't working. Tested a memory stick and my iPod, and neither device shows up on the desktop. My firewire does seem to work -- just backed up everything on an external hard drive.
    The profiler shows these USB devices:
    -- USB Bus / IR Receiver
    -- USB Bus
    -- USB Bus / Bluetooth Host Controller
    -- USB Bus / Apple Internal Keyboard/Trackpad
    -- USB High-Speed Bus
    Thanks again. My next step is to call AppleCare.

  • Setup Assistant fails during file transfer and loops back to the beginnig

    I have a PPC G5 running 10.4.11 and just bought an Intel-based MacBook Pro. (I haven’t gotten it to fully start up yet, so I’m not sure about the OS.)
    I've tried to use the Setup Assistant to migrate my files and applications from my desktop to the laptop, but when I get to the Transfer Files option, the Users, Applications Folder, and Files and Folders options never finish calculating. Everytime I hit Transfer, a black-and-white wheel appears for less than a second then disappears, and Setup Assistant loops back to the beginning, where I get the multilingual welcome messages and bad music. Or, if I do nothing and wait for the Transfer Files step to calculate, Setup Assistant still just loops back to the beginning.
    I’ve tried the options for transferring from another Mac and from another volume. I’ve tried copying from the G5 in Target Disk Mode and tried copying from a cloned firewire hard drive. I’ve tried using the firewire 400 and 800 ports, different cables. I’ve run DiskWarrior on the G5 and the cloned disc to make sure no disc errors hung up the process. I tried booting into Safe Mode and following that protocol, though it seemed to address a different issue than the one I’m experiencing.
    Any ideas about what I can do? I’d rather do this in Setup Assistant than Migration Assistant, and I really don’t relish the idea of reinstalling all the software I have on the G5 onto the MacBook Pro. (Logic, for example, takes forever to install.)
    Let me know!

    Even if it's a demo, it's unlikely it's got 10.5 on it. Maybe 10.6. I've used the 10.6 SA from Leopard, which ran perfectly with no problems. As for MA, here's one way to go about it, if you can't finish with SA. (Thanks to MonkeyBoy at XYMer's)
    If you choose to use the migration assistant after installing SL to migrate settings over from Tiger, it'll copy over all your data intact from Tiger, as well as use the same account names & passwords.
    What I typically do is choose a dummy name during the installation, then use MA to import the "real" accounts from the old install. After I'm satisfied MA moved over the accounts properly (I've logged into them and used them for a few hours/days and generally feel satisfied with the lack of crashes and similarly "odd" events) then I delete the dummy account.

  • New intel Xserve with Leopard Server setup assistance....

    Hello
    Im quite a newbie when it comes to administrating OS X Server, Xserves and RAID's so please bare with me if the following question seems obvious or dumb...
    Currently I have inherited the following setup - G5 Xserve running 10.4.10 Server which has the following services running = Kerio MailServer, AFP, DHCP, DNS, Firewall, NAT, OD, VPN and Windows. This Xserve is also connected to an Apple RAID via fibre channel for file sharing and also to a Tape multi-changer backup unit via scsi.
    I have just bought a new Intel Xserve and have installed 10.5 Server on it. I have this server as I would like to get iCal Server and Directory up and running and eventually share some of the G5 services. For iCal Server and Directory I assume ill need the 10.5 Server set up as Open Directory Master but my worry is I have that already on my G5 Xserve. If I was to migrate the 25 usernames from there to the 10.5 Server, would every user still be able to connect to the RAID (as the RAID is still physically connected to the G5 Xserve) for file sharing?
    I hope some one could advise or recommend a better way, let me know if you need me to try and clarify the question better!
    Thanks in advance

    Hello
    Im quite a newbie when it comes to administrating OS X Server, Xserves and RAID's so please bare with me if the following question seems obvious or dumb...
    Currently I have inherited the following setup - G5 Xserve running 10.4.10 Server which has the following services running = Kerio MailServer, AFP, DHCP, DNS, Firewall, NAT, OD, VPN and Windows. This Xserve is also connected to an Apple RAID via fibre channel for file sharing and also to a Tape multi-changer backup unit via scsi.
    I have just bought a new Intel Xserve and have installed 10.5 Server on it. I have this server as I would like to get iCal Server and Directory up and running and eventually share some of the G5 services. For iCal Server and Directory I assume ill need the 10.5 Server set up as Open Directory Master but my worry is I have that already on my G5 Xserve. If I was to migrate the 25 usernames from there to the 10.5 Server, would every user still be able to connect to the RAID (as the RAID is still physically connected to the G5 Xserve) for file sharing?
    I hope some one could advise or recommend a better way, let me know if you need me to try and clarify the question better!
    Thanks in advance

  • Ipod Nano Setup Assistant does not appear!!!

    I am using an HP PC (64 bit)with Windows Vista. I have installed the 64 bit edition of i Tunes, and I have tried EVERYTHING the troubleshooting assistant has suggested (several times) and the "ipod nano setup assistant" fails to appear after I install the itunes/QT and connect the ipod nano. PLEASE HELP!!!

    No.  But you should still have a backup of your user data, including your iTunes data. 
    If you want to completely remove and reinstall iTunes, this document explains how to do it (assuming you use a Windows PC)
    http://support.apple.com/kb/ht1923
    You may want to try these suggestions first
    http://support.apple.com/kb/ts1363

  • Setup of 11g database: configuration assistants failed

    Hello,
    I have downloaded Oracle 11g from www.oracle.com and run installer in my Fedora 7 Linux (before doing it I prepared my system - accounts, kernel parameters).
    The problem is that during setup of database I got "Oracle Net"configuration error (if I remember correctly). Ate the end of setup I received message:
    OUI-25031: Some of the configuration assistants failed/cancelled. It is strongly
    recommended that you retry the configuration assistans at this time. Not successfully running any "Recommended" assistants means you system will not be correctly configured.
    1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
    2. Fix the errors causing these failures.
    3. Select the failed assistants and click the 'Retry' button to retry them.
    What should I do?
    Please help.
    Thanks!!!
    /RAM/
    PS. I don't see Oracle in my KDE menu although I expected it. Is it OK?

    It seems a problem of kernel or linux's package .Check the Linux package and kernel parameter as described in my article:
    http://mikegeorgiou.blogspot.com/2007/08/install-oracle-11i-on-redhat-linux-5.html
    Michael

  • My 2008 imac takes 10 minutes to boot up as far as  Blurtooth Setup Assistant it then tries to find my  Bluetooth keyboard, mouse and trackpad - and fails! How can I get over this problem?

    My 2008 iMac takes 10 minutes to boot up as far as Bluetooth setup assistant. It then tries to find my Bluetooth keyboard, trackpad and mouse. (they are all fully charged. it  continues to try to find these items. what do I do next?
    from Brian Dowling.

    Post an EtreCheck report of your computer and we can look for obvious issues.

  • INS-20802 Oracle net configuration assistant failed on windows server 2003 R2

    Hi all,
                I have windows server 2003 r2 installed on VM and tried installing oracle database 11g r2.
    But got Oracle net configuration assistant failed. Below is the log
    INFO: This variable JRE_HOME is not added to the global context map
    INFO: This variable ISQLPLUS_PROTOCOL is not added to the global context map
    INFO: This variable ISQLPLUS_PORT is not added to the global context map
    INFO: This variable HOST_SID_OFFSET_ENABLED is not added to the global context map
    INFO: This variable HOSTNAME is not added to the global context map
    INFO: This variable EM_UPLOAD_DISABLE is not added to the global context map
    INFO: This variable EM_UIX_DEBUG_FLAG is not added to the global context map
    INFO: This variable EMPRODVER is not added to the global context map
    INFO: This variable CONSOLE_MODE is not added to the global context map
    INFO: This variable CONSOLE_CFG is not added to the global context map
    INFO: This variable sl_oraclehomes is not added to the global context map
    INFO: This variable s_oc4jDir is not added to the global context map
    INFO: This variable s_oc4jAppsDir is not added to the global context map
    INFO: This variable s_jreHome is not added to the global context map
    INFO: This variable s_configcommand is not added to the global context map
    INFO: This variable b_isRAC is not added to the global context map
    INFO: This variable b_UNIX is not added to the global context map
    INFO: This variable OJSP_JAR_LOC is not added to the global context map
    INFO: This variable OJSPUTIL_JAR_LOC is not added to the global context map
    INFO: This variable LDAP_JAR_LOC is not added to the global context map
    INFO: This variable JAVA_HOME is not added to the global context map
    INFO: This variable ISQLPLUS_HOST is not added to the global context map
    INFO: This variable EM_UIX_LOCATION is not added to the global context map
    INFO: This variable EM_REPOS_HOST is not added to the global context map
    INFO: This variable EM_PING_COMMAND is not added to the global context map
    INFO: This variable EM_OC4J_HOME is not added to the global context map
    INFO: This variable EM_EAR_LOC is not added to the global context map
    INFO: This variable EMDROOT is not added to the global context map
    INFO: Adding the variable s_oc4jAdmPasswd to the aggregate oracle.sysman.console.db
    INFO: Adding the variable s_oc4jAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
    INFO: This variable s_launchBrowserClasspath is not added to the global context map
    INFO: This variable s_javapOracleHome is not added to the global context map
    INFO: This variable PROD_HOME is not added to the global context map
    INFO: {Parameter:TOPLEVEL_COMPONENT in {Aggregate:OuiConfigVariables:1.0.0.0.0:common}}: Parameter data type is not compatible with the provided String Array.
    INFO: passing params to cf done
    INFO: done saving info by cf
    INFO: This is a shared oracle home or remote nodes are null. No copy required.
    INFO: Checkpoint:Failed Checkpoint found returning it for getAllFailedCheckPoints.
    INFO: Checkpoint:Failed Checkpoint found returning null for getLastFailedCheckPoint.
    INFO: Checkpoint:Index file written and updated
    INFO: Checkpoint:Transfer of file done from remote node
    INFO: Updating the global context
    INFO: Path To 'globalcontext.xml' = C:\oracle\product\11.2.0\dbhome_1\install\chainedInstall\globalcontext
    INFO: Since operation was successful, move the current OiicAPISessionDetails to installed list
    INFO: Number of root scripts to be executed = 0
    INFO: isSuccessfullInstallation: true
    INFO: isSuccessfullRemoteInstallation: true
    INFO: Adding ExitStatus SUCCESS to the exit status set
    INFO: Completed setting up InstallDB
    INFO: Performing Configuration
    INFO: Entering ConfigClient.init method
    INFO: ConfigClient.init sOracleHomeLoc=C:\oracle\product\11.2.0\dbhome_1, sTopAggId=oracle.server
    INFO: Entering ConfigClient.initClientAndSession method
    INFO: ConfigClient.initClientAndSession status : connected to the config framework
    INFO: ConfigClient.initClientAndSession session begun oracle.sysman.emCfg.client.CfwSession@c0d228
    INFO: ConfigClient.initClientAndSession m_oAggregate=[Loracle.sysman.emCfg.common.IAggregate;@1257f0e
    INFO: Configuration log directory - C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs
    INFO: Exiting ConfigClient.init method
    INFO: Calling event ConfigSessionInitialized
    INFO: ConfigClient.registerOutErrStream method called
    INFO: Entering ConfigClient.getToolsList method
    INFO: Created config job for Oracle Net Configuration Assistant
    INFO: Created config job for Oracle Database Configuration Assistant
    INFO: Updating Transient Parameters in the Aggregates
    INFO: Updating Transient Parameters for oracle.server
    INFO: Updating Transient Parameters for oracle.assistants.netca.client
    INFO: Updating Transient Parameters for oracle.assistants.server
    INFO: Setting value to transient variable s_dbcaArgs
    INFO: Setting value to transient variable S_SYSMANPASSWORD
    INFO: Setting value to transient variable s_systemPasswordFlag
    INFO: Setting value to transient variable s_sysmanPasswordFlag
    INFO: Setting value to transient variable S_HOSTUSERPASSWORD
    INFO: Setting value to transient variable s_dbcaArgsOverride
    INFO: Setting value to transient variable windows_commandline_prefix
    INFO: Setting value to transient variable s_sysPasswordFlag
    INFO: Setting value to transient variable S_SYSPASSWORD
    INFO: Setting value to transient variable s_asmsnmpPasswordFlag
    INFO: Setting value to transient variable S_DBSNMPPASSWORD
    INFO: Setting value to transient variable s_dbsnmpPasswordFlag
    INFO: Setting value to transient variable S_ASMSNMPPASSWORD
    INFO: Setting value to transient variable S_SYSTEMPASSWORD
    INFO: Setting value to transient variable s_hostUserPasswordFlag
    INFO: Updating Transient Parameters for OuiConfigVariables
    INFO: Updating Transient Parameters for oracle.sysman.ccr
    INFO: Updating Transient Parameters for oracle.sysman.console.db
    INFO: Successfully updated Transient Parameters in the Aggregates
    INFO: Configuration log directory - C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs
    INFO:
    The Runconfig command constructed is C:\oracle\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=true $*
    INFO: Created a new file C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands
    INFO: Since the option is to overwrite the existing C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands file, backing it up
    INFO: The backed up file name is C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands.bak
    INFO: Entering ConfigClient.executeToolsInAggregate method
    INFO: ConfigClient.executeToolsInAggregate oAggregate=oracle.server:oracle.server:11.2.0.1.0:common
    INFO: Entering ConfigClient.assignAction method
    INFO: ConfigClient.assignAction actionref=[Loracle.sysman.emCfg.common.IActionReference;@1ae9cec
    INFO: ConfigClient.assignAction action is of type :configuration
    INFO: Exiting ConfigClient.assignAction method
    INFO: ConfigClient.executeToolsInAggregate action assigned
    INFO: Started Plugin named: Oracle Net Configuration Assistant
    INFO: Found associated job
    INFO: Starting 'Oracle Net Configuration Assistant'
    INFO: Starting 'Oracle Net Configuration Assistant'
    INFO: UnsatisfiedLinkError exception loading native library: oranjni11
    INFO: java.lang.UnsatisfiedLinkError: C:\oracle\product\11.2.0\dbhome_1\BIN\oranjni11.dll: Can't find dependent libraries
    WARNING: java.lang.UnsatisfiedLinkError: jniGetOracleHome
    WARNING: at oracle.net.common.NetGetEnv.jniGetOracleHome(Native Method)
    WARNING: at oracle.net.common.NetGetEnv.getOracleHome(Unknown Source)
    WARNING: at oracle.net.ca.NetCALogger.getOracleHome(NetCALogger.java:230)
    WARNING: at oracle.net.ca.NetCALogger.initOracleParameters(NetCALogger.java:215)
    WARNING: at oracle.net.ca.NetCALogger.initLogger(NetCALogger.java:130)
    WARNING: at oracle.net.ca.NetCA.main(NetCA.java:408)
    INFO:
    INFO: Error: jniGetOracleHome
    INFO: Oracle Net Services configuration failed.  The exit code is 1
    INFO:
    WARNING:
    INFO: Completed Plugin named: Oracle Net Configuration Assistant
    INFO: Oracle Net Configuration Assistant failed.
    INFO: Oracle Net Configuration Assistant failed.
    INFO: ConfigClient.executeToolsInAggregate action performed
    INFO: Exiting ConfigClient.executeToolsInAggregate method
    INFO: Calling event ConfigToolsExecuted
    INFO:
    The Runconfig command constructed is C:\oracle\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=false $*
    INFO: Created a new file C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands
    INFO: Since the option is to overwrite the existing C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands file, backing it up
    INFO: The backed up file name is C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands.bak
    WARNING: readme.txt file doesn't exits
    INFO: ConfigClient.saveSession method called
    INFO: Calling event ConfigSessionEnding
    INFO: ConfigClient.endSession method called
    INFO: Completed Configuration
    INFO: Shutting down OUISetupDriver.JobExecutorThread
    INFO: Cleaning up, please wait...
    INFO: Dispose the install area control object
    INFO: Update the state machine to STATE_CLEAN
    INFO: All forked task are completed at state setup
    INFO: Completed background operations
    INFO: Moved to state <setup>
    INFO: Performing Configuration
    INFO: Entering ConfigClient.init method
    INFO: ConfigClient.init sOracleHomeLoc=C:\oracle\product\11.2.0\dbhome_1, sTopAggId=oracle.server
    INFO: Entering ConfigClient.initClientAndSession method
    INFO: ConfigClient.initClientAndSession status : connected to the config framework
    INFO: ConfigClient.initClientAndSession session begun oracle.sysman.emCfg.client.CfwSession@140de18
    INFO: ConfigClient.initClientAndSession m_oAggregate=[Loracle.sysman.emCfg.common.IAggregate;@1b52041
    INFO: Configuration log directory - C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs
    INFO: Exiting ConfigClient.init method
    INFO: Calling event ConfigSessionInitialized
    INFO: ConfigClient.registerOutErrStream method called
    INFO: Entering ConfigClient.getToolsList method
    INFO: Selecting job named 'Oracle Net Configuration Assistant' for retry
    INFO: Selecting job named 'Oracle Database Configuration Assistant' for retry
    INFO: Updating Transient Parameters in the Aggregates
    INFO: Updating Transient Parameters for oracle.server
    INFO: Updating Transient Parameters for oracle.assistants.netca.client
    INFO: Updating Transient Parameters for oracle.assistants.server
    INFO: Setting value to transient variable s_dbcaArgs
    INFO: Setting value to transient variable S_SYSMANPASSWORD
    INFO: Setting value to transient variable s_systemPasswordFlag
    INFO: Setting value to transient variable s_sysmanPasswordFlag
    INFO: Setting value to transient variable S_HOSTUSERPASSWORD
    INFO: Setting value to transient variable s_dbcaArgsOverride
    INFO: Setting value to transient variable windows_commandline_prefix
    INFO: Setting value to transient variable s_sysPasswordFlag
    INFO: Setting value to transient variable S_SYSPASSWORD
    INFO: Setting value to transient variable s_asmsnmpPasswordFlag
    INFO: Setting value to transient variable S_DBSNMPPASSWORD
    INFO: Setting value to transient variable s_dbsnmpPasswordFlag
    INFO: Setting value to transient variable S_ASMSNMPPASSWORD
    INFO: Setting value to transient variable S_SYSTEMPASSWORD
    INFO: Setting value to transient variable s_hostUserPasswordFlag
    INFO: Updating Transient Parameters for OuiConfigVariables
    INFO: Updating Transient Parameters for oracle.sysman.ccr
    INFO: Updating Transient Parameters for oracle.sysman.console.db
    INFO: Successfully updated Transient Parameters in the Aggregates
    INFO: Configuration log directory - C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs
    INFO:
    The Runconfig command constructed is C:\oracle\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=true $*
    INFO: Since the option is to overwrite the existing C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands file, backing it up
    INFO: The backed up file name is C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands.bak.1
    INFO: Entering ConfigClient.executeSelectedToolsInAggregate method
    INFO: ConfigClient.executeSelectedToolsInAggregate oAggregate=oracle.server:oracle.server:11.2.0.1.0:common
    INFO: Entering ConfigClient.assignAction method
    INFO: ConfigClient.assignAction actionref=[Loracle.sysman.emCfg.common.IActionReference;@b970f5
    INFO: ConfigClient.assignAction action is of type :configuration
    INFO: Exiting ConfigClient.assignAction method
    INFO: ConfigClient.executeSelectedToolsInAggregate action assigned
    INFO: Started Plugin named: Oracle Net Configuration Assistant
    INFO: Found associated job
    INFO: Starting 'Oracle Net Configuration Assistant'
    INFO: Starting 'Oracle Net Configuration Assistant'
    INFO: UnsatisfiedLinkError exception loading native library: oranjni11
    INFO: java.lang.UnsatisfiedLinkError: C:\oracle\product\11.2.0\dbhome_1\BIN\oranjni11.dll: Can't find dependent libraries
    WARNING: java.lang.UnsatisfiedLinkError: jniGetOracleHome
    WARNING: at oracle.net.common.NetGetEnv.jniGetOracleHome(Native Method)
    WARNING: at oracle.net.common.NetGetEnv.getOracleHome(Unknown Source)
    WARNING: at oracle.net.ca.NetCALogger.getOracleHome(NetCALogger.java:230)
    WARNING: at oracle.net.ca.NetCALogger.initOracleParameters(NetCALogger.java:215)
    WARNING: at oracle.net.ca.NetCALogger.initLogger(NetCALogger.java:130)
    WARNING: at oracle.net.ca.NetCA.main(NetCA.java:408)
    INFO:
    INFO: Error: jniGetOracleHome
    INFO: Oracle Net Services configuration failed.  The exit code is 1
    INFO:
    WARNING:
    INFO: Completed Plugin named: Oracle Net Configuration Assistant
    INFO: Oracle Net Configuration Assistant failed.
    INFO: Oracle Net Configuration Assistant failed.
    INFO: ConfigClient.executeSelectedToolsInAggregate action performed
    INFO: Exiting ConfigClient.executeSelectedToolsInAggregate method
    INFO:
    The Runconfig command constructed is C:\oracle\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=false $*
    INFO: Since the option is to overwrite the existing C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands file, backing it up
    INFO: The backed up file name is C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands.bak.1
    WARNING: readme.txt file doesn't exits
    INFO: ConfigClient.saveSession method called
    INFO: Calling event ConfigSessionEnding
    INFO: ConfigClient.endSession method called
    INFO: Completed Configuration
    INFO: Performing Configuration
    INFO: Entering ConfigClient.init method
    INFO: ConfigClient.init sOracleHomeLoc=C:\oracle\product\11.2.0\dbhome_1, sTopAggId=oracle.server
    INFO: Entering ConfigClient.initClientAndSession method
    INFO: ConfigClient.initClientAndSession status : connected to the config framework
    INFO: ConfigClient.initClientAndSession session begun oracle.sysman.emCfg.client.CfwSession@969e08
    INFO: ConfigClient.initClientAndSession m_oAggregate=[Loracle.sysman.emCfg.common.IAggregate;@6155e3
    INFO: Configuration log directory - C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs
    INFO: Exiting ConfigClient.init method
    INFO: Calling event ConfigSessionInitialized
    INFO: ConfigClient.registerOutErrStream method called
    INFO: Entering ConfigClient.getToolsList method
    INFO: Selecting job named 'Oracle Net Configuration Assistant' for retry
    INFO: Selecting job named 'Oracle Database Configuration Assistant' for retry
    INFO: Updating Transient Parameters in the Aggregates
    INFO: Updating Transient Parameters for oracle.server
    INFO: Updating Transient Parameters for oracle.assistants.netca.client
    INFO: Updating Transient Parameters for oracle.assistants.server
    INFO: Setting value to transient variable s_dbcaArgs
    INFO: Setting value to transient variable S_SYSMANPASSWORD
    INFO: Setting value to transient variable s_systemPasswordFlag
    INFO: Setting value to transient variable s_sysmanPasswordFlag
    INFO: Setting value to transient variable S_HOSTUSERPASSWORD
    INFO: Setting value to transient variable s_dbcaArgsOverride
    INFO: Setting value to transient variable windows_commandline_prefix
    INFO: Setting value to transient variable s_sysPasswordFlag
    INFO: Setting value to transient variable S_SYSPASSWORD
    INFO: Setting value to transient variable s_asmsnmpPasswordFlag
    INFO: Setting value to transient variable S_DBSNMPPASSWORD
    INFO: Setting value to transient variable s_dbsnmpPasswordFlag
    INFO: Setting value to transient variable S_ASMSNMPPASSWORD
    INFO: Setting value to transient variable S_SYSTEMPASSWORD
    INFO: Setting value to transient variable s_hostUserPasswordFlag
    INFO: Updating Transient Parameters for OuiConfigVariables
    INFO: Updating Transient Parameters for oracle.sysman.ccr
    INFO: Updating Transient Parameters for oracle.sysman.console.db
    INFO: Successfully updated Transient Parameters in the Aggregates
    INFO: Configuration log directory - C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs
    INFO:
    The Runconfig command constructed is C:\oracle\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=true $*
    INFO: Since the option is to overwrite the existing C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands file, backing it up
    INFO: The backed up file name is C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands.bak.2
    INFO: Entering ConfigClient.executeSelectedToolsInAggregate method
    INFO: ConfigClient.executeSelectedToolsInAggregate oAggregate=oracle.server:oracle.server:11.2.0.1.0:common
    INFO: Entering ConfigClient.assignAction method
    INFO: ConfigClient.assignAction actionref=[Loracle.sysman.emCfg.common.IActionReference;@1e976fd
    INFO: ConfigClient.assignAction action is of type :configuration
    INFO: Exiting ConfigClient.assignAction method
    INFO: ConfigClient.executeSelectedToolsInAggregate action assigned
    INFO: Started Plugin named: Oracle Net Configuration Assistant
    INFO: Found associated job
    INFO: Starting 'Oracle Net Configuration Assistant'
    INFO: Starting 'Oracle Net Configuration Assistant'
    INFO: UnsatisfiedLinkError exception loading native library: oranjni11
    INFO: java.lang.UnsatisfiedLinkError: C:\oracle\product\11.2.0\dbhome_1\BIN\oranjni11.dll: Can't find dependent libraries
    WARNING: java.lang.UnsatisfiedLinkError: jniGetOracleHome
    WARNING: at oracle.net.common.NetGetEnv.jniGetOracleHome(Native Method)
    WARNING: at oracle.net.common.NetGetEnv.getOracleHome(Unknown Source)
    WARNING: at oracle.net.ca.NetCALogger.getOracleHome(NetCALogger.java:230)
    WARNING: at oracle.net.ca.NetCALogger.initOracleParameters(NetCALogger.java:215)
    WARNING: at oracle.net.ca.NetCALogger.initLogger(NetCALogger.java:130)
    WARNING: at oracle.net.ca.NetCA.main(NetCA.java:408)
    INFO:
    INFO: Error: jniGetOracleHome
    INFO: Oracle Net Services configuration failed.  The exit code is 1
    WARNING:
    INFO:
    INFO: Completed Plugin named: Oracle Net Configuration Assistant
    INFO: Oracle Net Configuration Assistant failed.
    INFO: Oracle Net Configuration Assistant failed.
    INFO: ConfigClient.executeSelectedToolsInAggregate action performed
    INFO: Exiting ConfigClient.executeSelectedToolsInAggregate method
    INFO:
    The Runconfig command constructed is C:\oracle\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=false $*
    INFO: Since the option is to overwrite the existing C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands file, backing it up
    INFO: The backed up file name is C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands.bak.2
    WARNING: readme.txt file doesn't exits
    INFO: ConfigClient.saveSession method called
    INFO: Calling event ConfigSessionEnding
    INFO: ConfigClient.endSession method called
    INFO: Completed Configuration

    Hi Srini,
           The issue is resolved. Thanks for your response.
        The issue is, windows 2003 server is 32 bit and I am trying to install 64 bit 11g database. I tried installing 32 bit 11g database. Before that I have cleared the traces of virtual box in my host system and reinstalled it and tried. It worked out.
    Thanks
    Sunil

  • Leopard taken hostage by Setup Assistant

    leopard has been running great (except for a lot of app crashes), but as of last night, every time i try to log in the setup assistant starts. if i complete the registration process, it logs me out, but when i log in again, setup assistant takes over. "about this mac" and "restart" and "system preferences" and every other menu item fails to do anything. my machine is literally disabled by the setup assistant right now. suggestions? the way the machine has been rendered useless, it feels like a virus or malware or something has corrupted the system. i have no idea why this would happen--the mac did lock up during a software update (my mac loves to freeze up hard every now and then for no reason at all).

    thanks. i think i was having more severe problems because i couldn't even get into safe mode. i suspect i had some bad memory (has since been removed, although it's still too soon to tell) which was causing random freezes. it happened during a software update, the recent one for itunes and quicktime. i decided to reinstall os x and restore using my time machine volume, and it worked impressively well. with a couple of hours, all my data was there, all my programs just worked (no more spending hours re-installing adobe software), and 99% of my mac and app settings were carried over, so it's basically like nothing happened. the only glitch was that time machine doesn't have an option to resume from a previous time machine volume--that is, when i noticed it wasn't backing up due to insufficient space, i didn't know what else to do but erase it and start over. i suppose that's one way to protect your data--explicitly forcing a manual erase, in case i wanted to use that volume to restore a duplicate onto another machine? or place it in cold storage; however, i wouldn't've minded the option to carry on uninterrupted. still, i'd call it a very successful practice test of time machine. going forward i feel a lot less concerned about losing all my files knowing i can be up and running again in a couple of hours right where i left off. i remember with windows i'd spend an entire weekend reinstalling the os, apps, coping files, entering serials, downloading drivers, etc. i'm sure there are plenty of backup programs on the market, such as retrospect, but this simplicity and integration speaks to just how mature os x has become.

  • Using Setup Assistant to migrate a 10.4.11 server to a new SL server, and have login panel before hardly anything has happened

    We have a 10.4.11 server, running on an antique 1.0GHz G4 Xserve.  We have purchased a mac mini server to replace it.  The Xserve only runs 3 services:  AFP, FTP and Open Directory (Master).  (We are considering reconfiguring the new server as an Open Directory replicate to another OD master on the network later.)
    I've RAIDed the two disks on the mini and reinstalled the OS.  It restarted, went through the language setup, put in the serial number, etc., and got to the "Transfer the information from an existing server" choice.  At that point, went and made a SuperDuper dmg of the 10.4.11 on a firewire drive.  When that was done, moved the firewire drive to the mini server, it appeared in the box as a choice for migrating from, selected it, and hit "continue."  It went through a couple of automatic screens with progress bars -- but it only took maybe 3-5 minutes, and then the machine rebooted.  It took nowhere NEAR long enough to have copied the data over -- the clone took nearly 3 hours to create, and it's running through a firewire 400. 
    So now the machine is sitting there, with the login panel up.  The firewire drive with the Xserve's image on it is still plugged in, and the blue light on the front of the drive is flashing like crazy.  What the heck?  I can't imagine that I should be logging in to the new server if it is in the middle of transferring data over!  Is it copying data?  If yes, how am I going to know when it's done?  If not, what the heck is it doing and what do I have to do to get it to copy the data over?

    Called Apple.  They said, "Oh, yeah, Setup Assistant doesn't actually work from 10.4 to 10.6"  (So WHY don't they fix it?  Why don't they take the manual off of the web site?)
    Moved on to Plan B.  Hooked the firewire drive to a G5 mac.  Stuck the 10.5 server disk into the G5, and upgraded the firwire drive to 10.5 server.  Booted off of it, changed the IP address and name, upgraded to 10.5.8, tested that our applications all worked.  Then hooked the firewire drive back up to the mini, ran through the 10.6 server initialization, and at the end selected the firewire drive as the "source" for “Transfer the information from an existing server”.  It went through the same as it did when it was at 10.4 -- did a few quick things and then rebooted and none of the data had transferred.
    Now we are at Plan C.  Booted the mini off of the server install disk, and tried to upgrade the firewire drive to 10.6.  Told us we can't because it needs to be GUID.  After saying a few appropriate obscenities, got another firewire drive, formatted it GUID and are now doing a copy from the upgraded-to-10.5 firewire drive to the formatted-GUID drive.
    Plan D is to upgrade the new drive to 10.6 server, try to boot the mini off of it, and if it works, use DiskUtility to copy it to the mini's internal RAID.

  • Oracle Clusterware Configuration Assistant fails

    I am installing clusterware 11.1.0.6 and the runcluvfy commands all came back as passed, except for the VIP, which the documentation says to ignore. The whole install goes to 100%, then it runs the configuration assistants.
    It falls over on the first of these: Oracle Configuration Assistant. If I retry it, the same addition is placed in the logfile, as below:
    INFO: Starting to execute configuration assistants
    INFO: Command = C:\WINDOWS\system32\cmd /c call C:\oracle\11.1.0\crs/install/crssetup.config.bat
    clscfg: EXISTING configuration version 4 detected.
    clscfg: version 4 is 11 Release 1.
    Successfully accumulated necessary OCR keys.
    Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
    node <nodenumber>: <nodename> <private interconnect name> <hostname>
    node 1: vm-rac1 vm-rac1-priv vm-rac1
    node 2: vm-rac2 vm-rac2-priv vm-rac2
    clscfg: Arguments check out successfully.
    NO KEYS WERE WRITTEN. Supply -force parameter to override.
    -force is destructive and will destroy any previous cluster
    configuration.
    Step 1: checking status of CRS cluster
    Step 2: creating directories (C:\oracle\11.1.0\crs)
    Step 3: configuring OCR repository
    Oracle Cluster Registry already initialized
    Step 4: configuring safe mode for CRS stack
    Step 5: Starting up CRS stack on all nodes
    vm-rac1 failed to startup service OracleCSService, err(1068)
    vm-rac2 failed to startup service OracleCSService, err(1068)
    Command = C:\WINDOWS\system32\cmd /c call C:\oracle\11.1.0\crs/install/crssetup.config.bat has failed
    INFO: Configuration assistant "Oracle Clusterware Configuration Assistant" failed
    *** Starting OUICA ***
    Oracle Home set to C:\oracle\11.1.0\crs
    Configuration directory is set to C:\oracle\11.1.0\crs\cfgtoollogs. All xml files under the directory will be processed
    INFO: The "C:\oracle\11.1.0\crs\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
    INFO:
    The Runconfig command constructed is null
    INFO: Since the option is to overwrite the existing C:\oracle\11.1.0\crs\cfgtoollogs\configToolFailedCommands file, backing it up
    INFO: The backed up file name is C:\oracle\11.1.0\crs\cfgtoollogs\configToolFailedCommands.bak.1
    SEVERE: OUI-25031:Some of the configuration assistants failed/cancelled. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
    1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
    2. Fix the errors causing these failures.
    3. Select the failed assistants and click the 'Retry' button to retry them.
    Please help.

    Sorry:
    alertvm-rac1.log:
    Oracle Database 11g CRS Release 11.1.0.6.0 - Production Copyright 1996, 2007 Oracle. All rights reserved.
    2009-05-20 15:44:25.531
    [client(3792)]CRS-1006:The OCR location \\.\ocrcfg is inaccessible. Details in C:\oracle\11.1.0\crs\log\vm-rac1\client\ocrconfig_3788.log.
    2009-05-20 15:44:25.609
    [client(3792)]CRS-1006:The OCR location \\.\ocrcfg is inaccessible. Details in C:\oracle\11.1.0\crs\log\vm-rac1\client\ocrconfig_3788.log.
    2009-05-20 15:44:25.671
    [client(3792)]CRS-1006:The OCR location \\.\ocrcfg is inaccessible. Details in C:\oracle\11.1.0\crs\log\vm-rac1\client\ocrconfig_3788.log.
    2009-05-20 15:44:25.687
    [client(3792)]CRS-1006:The OCR location \\.\ocrcfg is inaccessible. Details in C:\oracle\11.1.0\crs\log\vm-rac1\client\ocrconfig_3788.log.
    2009-05-20 15:44:28.921
    [client(3792)]CRS-1013:The OCR at \\.\ocrcfg was successfully formatted using version 2. Ignore earlier CRS-1006 messages if any.
    2009-05-20 15:44:40.875
    [client(3796)]CRS-1801:Cluster vm-rac_cluster configured with nodes vm-rac1 vm-rac2 .
    client\clscfg.log:
    Oracle Database 11g CRS Release 11.1.0.6.0 - Production Copyright 1996, 2007 Oracle. All rights reserved.
    2009-05-20 16:31:03.796: [  OCROSD][3196]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
    2009-05-20 16:31:03.812: [  OCROSD][3196]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
    2009-05-20 16:31:03.875: [  OCROSD][3196]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
    2009-05-20 16:31:03.875: [  OCROSD][3196]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
    2009-05-20 16:31:03.921: [  OCROSD][3196]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
    2009-05-20 16:31:03.937: [  OCROSD][3196]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
    client\clsfmt.log:
    Oracle Database 11g CRS Release 11.1.0.6.0 - Production Copyright 1996, 2007 Oracle. All rights reserved.
    2009-05-20 15:44:40.031: [  OCROSD][3872]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
    2009-05-20 15:44:40.031: [  OCROSD][3872]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
    2009-05-20 15:44:40.187: [  CLSFMT][3872]clsfmt: successfully initialized file \\.\votedsk1
    client\ocrconfig_3788.log:
    Oracle Database 11g CRS Release 11.1.0.6.0 - Production Copyright 1996, 2007 Oracle. All rights reserved.
    2009-05-20 15:44:25.453: [  OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
    2009-05-20 15:44:25.484: [  OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
    2009-05-20 15:44:25.484: [  OCRRAW][3792]propriogid:1: INVALID FORMAT
    2009-05-20 15:44:25.531: [  OCRRAW][3792]ibctx:1:ERROR: INVALID FORMAT
    2009-05-20 15:44:25.562: [  OCRRAW][3792]proprinit:problem reading the bootblock or superbloc 22
    2009-05-20 15:44:25.562: [ default][3792]a_init:7!: Backend init unsuccessful : [22]
    2009-05-20 15:44:25.562: [ OCRCONF][3792]ocrconfig starts...
    2009-05-20 15:44:25.578: [ OCRCONF][3792]Upgrading OCR data
    2009-05-20 15:44:25.609: [  OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
    2009-05-20 15:44:25.609: [  OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
    2009-05-20 15:44:25.609: [  OCRRAW][3792]propriogid:1: INVALID FORMAT
    2009-05-20 15:44:25.609: [  OCRRAW][3792]ibctx:1:ERROR: INVALID FORMAT
    2009-05-20 15:44:25.609: [  OCRRAW][3792]proprinit:problem reading the bootblock or superbloc 22
    2009-05-20 15:44:25.609: [ default][3792]a_init:7!: Backend init unsuccessful : [22]
    2009-05-20 15:44:25.609: [ OCRCONF][3792]Exporting OCR data to [OCRUPGRADEFILE]
    2009-05-20 15:44:25.640: [  OCRAPI][3792]a_init:7!: Backend init unsuccessful : [33]
    2009-05-20 15:44:25.640: [ OCRCONF][3792]There was no previous version of OCR. error:[PROC-33: Oracle Cluster Registry is not configured]
    2009-05-20 15:44:25.656: [  OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
    2009-05-20 15:44:25.671: [  OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
    2009-05-20 15:44:25.671: [  OCRRAW][3792]propriogid:1: INVALID FORMAT
    2009-05-20 15:44:25.671: [  OCRRAW][3792]ibctx:1:ERROR: INVALID FORMAT
    2009-05-20 15:44:25.671: [  OCRRAW][3792]proprinit:problem reading the bootblock or superbloc 22
    2009-05-20 15:44:25.671: [ default][3792]a_init:7!: Backend init unsuccessful : [22]
    2009-05-20 15:44:25.687: [  OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
    2009-05-20 15:44:25.687: [  OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
    2009-05-20 15:44:25.687: [  OCRRAW][3792]propriogid:1: INVALID FORMAT
    2009-05-20 15:44:25.687: [  OCRRAW][3792]ibctx:1:ERROR: INVALID FORMAT
    2009-05-20 15:44:25.687: [  OCRRAW][3792]proprinit:problem reading the bootblock or superbloc 22
    2009-05-20 15:44:25.687: [  OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
    2009-05-20 15:44:25.703: [  OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
    2009-05-20 15:44:25.703: [  OCRRAW][3792]propriogid:1: INVALID FORMAT
    2009-05-20 15:44:25.875: [  OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
    2009-05-20 15:44:25.921: [  OCRRAW][3792]propriowv: Vote information on disk 0 [\\.\ocrcfg] is adjusted from [0/0] to [2/2]
    2009-05-20 15:44:28.921: [  OCRRAW][3792]iniconfig:No 92 configuration
    2009-05-20 15:44:28.921: [  OCRAPI][3792]a_init:6a: Backend init successful
    2009-05-20 15:44:30.593: [ OCRCONF][3792]Initialized DATABASE keys in OCR
    2009-05-20 15:44:31.453: [ OCRCONF][3792]csetskgfrblock0: output from clsmft: [clsfmt: Failure trying to resize OCR file \\.\ocrcfg
    from 10725732864 bytes to 10725736448 bytes
    clsfmt: successfully initialized file \\.\ocrcfg
    g
    2009-05-20 15:44:31.531: [ OCRCONF][3792]Successfully set skgfr block 0
    2009-05-20 15:44:31.531: [ OCRCONF][3792]Exiting [status=success]...
    So, it seems to be all about the OCR not setup correctly, however, all I've done is follow the notes. This was a 'clean' VM install of win2003 Server, so nothing has been accidently tinkered with.

  • ISE BYOD Android : Impossible to launch "Network setup assistant"

    Hello
    The Byod procedure fails when launching "Network setup assistant"
    Error message  is: "This profile could not be downloaded, are-you connected to Guest Portal ?"
    WLC 5508  (VM) 7.5
    Wlan : Flexconnect
    Config : AP Flexconnect
    ISE 1.3
    Android 4.1.2
    Here are the step:
    1: Rule CWA : Redirect to Guest portal : OK
    2: Rule CWA : Redirect to device portal : OK
    3: Rule Android_dualSSID : Downloading "Network setup assistant" from Googleplay : OK
    4: Rule Android_dualSSID :  Launch "Network setup assistant 1.2.40"  : NOK
    Note : Profile "CWA_GooglePlay" = Redirect-ACL (NSP-ACL-Google)
    The NSP-ACL-Google looks like:
    (Taken from Flexconnect AP):
    Extended IP access list NSP-ACL-Google
        10 permit ip any host <IP ISE>
        20 permit ip host <IP ISE> any
        30 permit udp any range 0 65535 any eq domain
        40 permit udp any eq domain any range 0 65535
        50 permit ip any 74.128.0.0 0.0.255.255
        60 permit ip 74.128.0.0 0.0.255.255 any
        70 permit ip any 173.194.0.0 0.0.255.255
        80 permit ip 173.194.0.0 0.0.255.255 any
        90 permit ip any 206.111.0.0 0.0.255.255
        100 permit ip 206.111.0.0 0.0.255.255 any
        110 permit ip any 74.125.0.0 0.0.255.255
        120 permit ip 74.125.0.0 0.0.255.255 any
        130 permit ip any 208.117.224.0 0.0.0.255
        140 permit ip 208.117.224.0 0.0.0.255 any
        150 permit ip any 216.12.120.0 0.0.0.255
        160 permit ip 216.12.120.0 0.0.0.255 any
        170 deny ip any any
    Could you please help
    Michel Misonne

    Hello
    We use the one describe in "Cisco Unified Access (UA) and Bring Your Own
    Device (BYOD) CVD"
    I tried also with this one:
    Extended IP access list NSP-ACL-Google
        10 permit ip any host 10.35.124.195
        20 permit ip host 10.35.124.195 any
        30 permit ip any host 10.35.65.4
        40 permit ip host 10.35.65.4 any
        50 deny ip any 72.163.1.0 0.0.0.255
        60 permit ip any any
    10 : ISE
    20 : ISE
    30 : DNS
    40 : DNS
    50  :Enroll.cisco.com= 72.163.1.80  ( To redirect the Network setup assistant to ISE)
    (Enroll.cisco.com is the adresse that the Network setup assiatnt is tryiong to connect)
    Regards
    Michel

  • Oracle Net Configuration Assistant  Failed(see details...) 11g on Fedora 7

    I am a newbie in a Linux and Oracle ,so
    can somebody help me to solve this problem, i've done everything from
    this site : http://www.oracle-base.com/articles/11g/OracleDB11gR1InstallationOnFedora7.php
    and i've got this error :
    Output generated from configuration assistant "Oracle Net Configuration Assistant":
    Command = /home/oracle/app/oracle/product/11.1.0/db_1/bin/netca /orahome /home/oracle/app/oracle/product/11.1.0/db_1 /orahnam OraDb11g_home1 /instype typical /inscomp client,oraclenet,javavm,server,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /home/oracle/app/oracle/product/11.1.0/db_1/network/install/netca_typ.rsp
    Parsing command line arguments:
    Parameter "orahome" = /home/oracle/app/oracle/product/11.1.0/db_1
    Parameter "orahnam" = OraDb11g_home1
    Parameter "instype" = typical
    Parameter "inscomp" = client,oraclenet,javavm,server,ano
    Parameter "insprtcl" = tcp
    Parameter "cfg" = local
    Parameter "authadp" = NO_VALUE
    Parameter "nodeinfo" = NO_VALUE
    Parameter "responsefile" = /home/oracle/app/oracle/product/11.1.0/db_1/network/install/netca_typ.rsp
    Done parsing command line arguments.
    Oracle Net Services Configuration:
    # An unexpected error has been detected by HotSpot Virtual Machine:
    # SIGSEGV (0xb) at pc=0x00b6fdd3, pid=7312, tid=3086751952
    # Java VM: Java HotSpot(TM) Client VM (1.5.0_11-b03 mixed mode)
    # Problematic frame:
    # C [libc.so.6+0x6ddd3] index+0x63
    Configuration assistant "Oracle Net Configuration Assistant" failed
    The "/home/oracle/app/oracle/product/11.1.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------
    thx

    Let's assume your software installation was successful. Even if no database was created at this time. Check the Oracle Universal Installer inventory to verify this. At this time you should verify your connectivity, as previously suggested, verify the hosts file properly describes the hostname.domainname and the simple hostname. Verify the security is disabled, according to the install guide you have referred to.
    Then check the environment variables PATH, ORACLE_HOME, ORACLE_SID, LD_LIBRARY_PATH are properly set and issue the commands:
    1) netmgr, this will be used to configure the listener and the tnsnames.ora file, you could use the netca if you want, this is a subset of netmgr.
    2) dbca, this will assist you in creating the database. there you will find an option to setup enterprise manager, ensure you have it selected so the EM repository is created.
    3) You won't find isqlplus on 11g, but the regular sqlplus CLI is available
    ~ Madrid

  • [INS-20802] Oracle Database Configuration Assistant failed

    I am trying to install Oracle 11g R2 on my windows 7 Professional, 64bit computer. After 42% of installation, it started showing some files are missing. Few of them are:
    C:\app\User\product\11.2.0\dbhome_1\owb\external\oc4j_applications\applications\WFMLRSVCApp.ear
    C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\WFMLRSVCApp.ear
    C:\app\User\product\11.2.0\dbhome_1\owb\external\oc4j_applications\applications\WFMGRApp.ear
    C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\WFMGRApp.ear
    C:\app\User\product\11.2.0\dbhome_1\owb\bin\win32\owb.tmp
    C:\app\User\product\11.2.0\dbhome_1\owb\bin\win32\setowbenv.tmp
    C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\system-application.xml
    And the final pop up winow says:
    Database configuration Assistant:Info
    *"Template General_Purpose.dbc does not exists. Please specify an exixting template for database creation"*
    *"[INS-20802] Oracle Database Configuration Assistant failed"*
    Details:
    Cause:- The plug-in failed in its perform method
    Action:- Refer to the logs or contact Oracle Support Services.
    Following are the last few lines of the log file. Can anyone please help me to fix this problem?
              Oracle Advanced Security 11.2.0.1.0
              Oracle Internet Directory Client 11.2.0.1.0
              HAS Files for DB 11.2.0.1.0
              Oracle Net Listener 11.2.0.1.0
              Oracle Net Services 11.2.0.1.0
              Oracle Text 11.2.0.1.0
              Oracle Database 11g 11.2.0.1.0
              Oracle COM Automation Feature 11.2.0.1.0
              Oracle OLAP 11.2.0.1.0
              Oracle Spatial 11.2.0.1.0
              Oracle Partitioning 11.2.0.1.0
              Enterprise Edition Options 11.2.0.1.0
              Oracle Database 11g 11.2.0.1.0
    INFO: OiicSaveInvWCCE:After saving the inventory. This is an Install session.
    INFO: SaveInvWCCE JRE files in Scratch :0
    INFO: Aggregate Name as given in the action for additional utility tools: oracle.rdbms.util
    INFO: Aggregate Location as given in the action for additional utility tools: C:\app\User\product\11.2.0\dbhome_1/install/config
    INFO: checking if the file C:\app\User\product\11.2.0\dbhome_1/install/config\oracle.rdbms.util.xml is present?
    INFO: Can proceed with additional utility processes ? : true
    INFO: Copying C:\app\User\product\11.2.0\dbhome_1\install\config\oracle.rdbms.util.xml to C:\app\User\product\11.2.0\dbhome_1\inventory\ContentsXML\ConfigXML\oracle.rdbms.util.1_0_0_0_0.xml with the permissions og-rwx
    INFO: cf session will be created for OH: C:/app/User/product/11.2.0/dbhome_1\ TLAggr: oracle.rdbms.util instancePath: inventory\ContentsXML\ConfigXML\
    INFO: cf session for OH: C:/app/User/product/11.2.0/dbhome_1\ TL Aggr: [oracle.rdbms.util] instancePath: inventory\ContentsXML\ConfigXML\
    INFO: No of Tools: 1
    INFO: Starting to execute the additional tools
    INFO: Executing utility tool: ADR Setup Utility
    INFO: Executing utility tool: ADR Setup Utility
    INFO: Command = C:\Windows\system32\cmd /c call C:\app\User\product\11.2.0\dbhome_1/bin/diagsetup.bat basedir=C:\app\User oraclehome=C:\app\User\product\11.2.0\dbhome_1
    INFO: Successfully executed utility tool: ADR Setup Utility
    INFO: Successfully executed utility tool: ADR Setup Utility
    INFO: All the tools have been executed Successfully
    INFO: Complete execution of additional tools
    INFO: oracle.installer.installUpdates property is set to false, so skipping the checking of updates
    INFO: Config Initialize JRE files in Scratch :0
    INFO: stage loc: C:/Users/User/AppData/Local/Temp/OraInstall2013-02-27_05-27-24AM\
    INFO: Copying Aggr XML for: Oracle Configuration Manager
    INFO: stage loc: C:/Users/User/AppData/Local/Temp/OraInstall2013-02-27_05-27-24AM\
    INFO: Copying Aggr XML for: HAS Common Files
    INFO: stage loc: C:/Users/User/AppData/Local/Temp/OraInstall2013-02-27_05-27-24AM\
    INFO: Copying Aggr XML for: Oracle Netca Client
    INFO: stage loc: C:/Users/User/AppData/Local/Temp/OraInstall2013-02-27_05-27-24AM\
    INFO: Copying Aggr XML for: Oracle Enterprise Manager Console DB
    INFO: stage loc: C:/Users/User/AppData/Local/Temp/OraInstall2013-02-27_05-27-24AM\
    INFO: Copying Aggr XML for: Database Configuration and Upgrade Assistants
    INFO: stage loc: C:/Users/User/AppData/Local/Temp/OraInstall2013-02-27_05-27-24AM\
    INFO: Copying Aggr XML for: Oracle Database 11g
    INFO: The Top level Aggreage File = C:\app\User\product\11.2.0\dbhome_1\inventory\ContentsXML\ConfigXML\oracle.server.11_2_0_1_0.xml
    INFO: OUI_CAPlugIn is not found in XML
    INFO: no. of tools to supress: 0 for comp: Oracle Enterprise Manager Console DB
    INFO: processing tool: Launch browser
    INFO: removing plugin invocation for: Launch browseras it doesnt support clone mode
    INFO: removing plugin invocation for: Launch browseras it doesnt support add node mode
    INFO: Namespace prefix 'agg' used but not declared.
    INFO: cf session will be created for OH: C:/app/User/product/11.2.0/dbhome_1\ TLAggr: oracle.server instancePath: inventory\ContentsXML\ConfigXML\
    INFO: cf session for OH: C:/app/User/product/11.2.0/dbhome_1\ TL Aggr: [oracle.server] instancePath: inventory\ContentsXML\ConfigXML\
    INFO: aggr ref length : 6
    INFO: cf session hashcode: 1847125318
    INFO: cf session saved with key: OraDb11g_home1 oracle.server
    INFO: cf session is ok
    INFO: created and saved cf session for oh: OraDb11g_home1
    INFO: passing params to cf
    INFO: Handling the storing of variables for aggr name oracle.sysman.ccr
    INFO: This variable s_OPSNodeInfoString is not added to the global context map
    INFO: This variable b_isUNIX is not added to the global context map
    INFO: This variable b_createResponseFile is not added to the global context map
    INFO: This variable s_ps is not added to the global context map
    INFO: This variable s_oraName is not added to the global context map
    INFO: This variable s_ccrJarDestination is not added to the global context map
    INFO: This variable b_localInstall is not added to the global context map
    INFO: This variable b_doConfigCCR is not added to the global context map
    INFO: This variable b_ccrUpgrade is not added to the global context map
    INFO: This variable s_rspFilePath is not added to the global context map
    INFO: This variable PROD_HOME is not added to the global context map
    INFO: for oracle.has.common no aggregate found by cf: no configuration
    INFO: Handling the storing of variables for aggr name oracle.assistants.netca.client
    INFO: This variable s_swingallName is not added to the global context map
    INFO: This variable s_shareName is not added to the global context map
    INFO: This variable s_runtimeLib is not added to the global context map
    INFO: This variable s_runTimeJar is not added to the global context map
    INFO: This variable s_responseFileName is not added to the global context map
    INFO: This variable s_operatingSystem is not added to the global context map
    INFO: This variable s_netcfgName is not added to the global context map
    INFO: This variable s_netcahelpName is not added to the global context map
    INFO: This variable s_netcaUpgradeFlag is not added to the global context map
    INFO: This variable s_netcaClass is not added to the global context map
    INFO: This variable s_netCA_Args is not added to the global context map
    INFO: This variable s_netCAInstalledProtocols is not added to the global context map
    INFO: This variable s_netAPIName is not added to the global context map
    INFO: This variable s_ldapclnt9 is not added to the global context map
    INFO: This variable s_ldapclnt11 is not added to the global context map
    INFO: This variable s_ldapclnt10 is not added to the global context map
    INFO: This variable s_jreLocation is not added to the global context map
    INFO: This variable s_jreJarFile is not added to the global context map
    INFO: This variable s_jreJar is not added to the global context map
    INFO: This variable s_jewtName is not added to the global context map
    INFO: This variable s_installTypeForLaunchNETCA is not added to the global context map
    INFO: This variable s_icebrowserName is not added to the global context map
    INFO: This variable s_helpName is not added to the global context map
    INFO: This variable s_ewtcompatName is not added to the global context map
    INFO: This variable s_ewtName is not added to the global context map
    INFO: This variable s_ewtFile is not added to the global context map
    INFO: This variable s_ewtCompat is not added to the global context map
    INFO: This variable s_cfgMethod is not added to the global context map
    INFO: This variable s_caHelpZhTwJar is not added to the global context map
    INFO: This variable s_caHelpZhCnJar is not added to the global context map
    INFO: This variable s_caHelpPtBRJar is not added to the global context map
    INFO: This variable s_caHelpKoJar is not added to the global context map
    INFO: This variable s_caHelpJar is not added to the global context map
    INFO: This variable s_caHelpJaJar is not added to the global context map
    INFO: This variable s_caHelpItJar is not added to the global context map
    INFO: This variable s_caHelpFrJar is not added to the global context map
    INFO: This variable s_caHelpEsJar is not added to the global context map
    INFO: This variable s_caHelpDeJar is not added to the global context map
    INFO: This variable s_authAdaptors is not added to the global context map
    INFO: This variable ps_netCA_Args_OverRide is not added to the global context map
    INFO: This variable b_net8ServerInstalling is not added to the global context map
    INFO: This variable b_javavmIsInstalling is not added to the global context map
    INFO: This variable b_isWindows is not added to the global context map
    INFO: This variable b_isUNIX is not added to the global context map
    INFO: This variable b_cmanIsInstalling is not added to the global context map
    INFO: This variable b_anoIsInstalling is not added to the global context map
    INFO: This variable s_xmlparservLoc is not added to the global context map
    INFO: This variable s_ouiJlibDir is not added to the global context map
    INFO: This variable s_opsmJlib is not added to the global context map
    INFO: This variable s_ntwkTools is not added to the global context map
    INFO: This variable s_netjlibDir is not added to the global context map
    INFO: This variable s_netcahelpLocation is not added to the global context map
    INFO: This variable s_netcaJlibDir is not added to the global context map
    INFO: This variable s_netcaDocDir is not added to the global context map
    INFO: This variable s_netPropertiesFile is not added to the global context map
    INFO: This variable s_netCA is not added to the global context map
    INFO: This variable s_net8caFileToInstantiate is not added to the global context map
    INFO: This variable s_jre15Location is not added to the global context map
    INFO: This variable s_jlibDir is not added to the global context map
    INFO: This variable s_inventoryPrereqOui is not added to the global context map
    INFO: This variable s_emdwLibDir is not added to the global context map
    INFO: This variable s_caHelpDir is not added to the global context map
    INFO: This variable s_assistantJlibDir is not added to the global context map
    INFO: This variable s_JavaFlag is not added to the global context map
    INFO: This variable b_isOPS is not added to the global context map
    INFO: This variable s_windowsCommandLine is not added to the global context map
    INFO: This variable s_net8caExecutable is not added to the global context map
    INFO: This variable s_netcaUserDirArg is not added to the global context map
    INFO: This variable s_installTypeForNetCA is not added to the global context map
    INFO: This variable s_netcaSilentFlag is not added to the global context map
    INFO: This variable s_netCAInstalledProducts is not added to the global context map
    INFO: This variable s_netcaClasspath is not added to the global context map
    INFO: This variable PROD_HOME is not added to the global context map
    INFO: ORACLE_HOME is not settable, hence not setting the value
    INFO: Handling the storing of variables for aggr name oracle.sysman.console.db
    INFO: This variable s_sid is not added to the global context map
    INFO: This variable s_serverInstallType is not added to the global context map
    INFO: This variable s_platform is not added to the global context map
    INFO: HashMap added with the key oracle.sysman.console.db and an empty variable Vector
    INFO: Adding the variable s_obfOc4jAdmPasswd to the aggregate oracle.sysman.console.db
    INFO: Adding the variable s_obfOc4jAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
    INFO: Adding the variable s_obfJtaAdmPasswd to the aggregate oracle.sysman.console.db
    INFO: Adding the variable s_obfJtaAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
    INFO: This variable s_nlsLang is not added to the global context map
    INFO: This variable s_emailServer is not added to the global context map
    INFO: This variable s_emailAddress is not added to the global context map
    INFO: This variable s_cfgtyperet is not added to the global context map
    INFO: Adding the variable s_JtaAdmPasswd to the aggregate oracle.sysman.console.db
    INFO: Adding the variable s_JtaAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
    INFO: This variable n_uploadInterval is not added to the global context map
    INFO: This variable localhost is not added to the global context map
    INFO: This variable b_launchTools is not added to the global context map
    INFO: This variable b_launchBrowser is not added to the global context map
    INFO: This variable b_isUNIX is not added to the global context map
    INFO: This variable b_centralConsole is not added to the global context map
    INFO: This variable USE_HTTP_PROXY is not added to the global context map
    INFO: This variable USE_DB_CONSOLE is not added to the global context map
    INFO: This variable SET_CONSOLE_MODE is not added to the global context map
    INFO: This variable SA_SETUP is not added to the global context map
    INFO: This variable OC4JLOC is not added to the global context map
    INFO: This variable NO_PC_MODE is not added to the global context map
    INFO: This variable LOGGING_LEVEL is not added to the global context map
    INFO: This variable JRE_HOME is not added to the global context map
    INFO: This variable ISQLPLUS_PROTOCOL is not added to the global context map
    INFO: This variable ISQLPLUS_PORT is not added to the global context map
    INFO: This variable HOST_SID_OFFSET_ENABLED is not added to the global context map
    INFO: This variable HOSTNAME is not added to the global context map
    INFO: This variable EM_UPLOAD_DISABLE is not added to the global context map
    INFO: This variable EM_UIX_DEBUG_FLAG is not added to the global context map
    INFO: This variable EMPRODVER is not added to the global context map
    INFO: This variable CONSOLE_MODE is not added to the global context map
    INFO: This variable CONSOLE_CFG is not added to the global context map
    INFO: This variable sl_oraclehomes is not added to the global context map
    INFO: This variable s_oc4jDir is not added to the global context map
    INFO: This variable s_oc4jAppsDir is not added to the global context map
    INFO: This variable s_jreHome is not added to the global context map
    INFO: This variable s_configcommand is not added to the global context map
    INFO: This variable b_isRAC is not added to the global context map
    INFO: This variable b_UNIX is not added to the global context map
    INFO: This variable OJSP_JAR_LOC is not added to the global context map
    INFO: This variable OJSPUTIL_JAR_LOC is not added to the global context map
    INFO: This variable LDAP_JAR_LOC is not added to the global context map
    INFO: This variable JAVA_HOME is not added to the global context map
    INFO: This variable ISQLPLUS_HOST is not added to the global context map
    INFO: This variable EM_UIX_LOCATION is not added to the global context map
    INFO: This variable EM_REPOS_HOST is not added to the global context map
    INFO: This variable EM_PING_COMMAND is not added to the global context map
    INFO: This variable EM_OC4J_HOME is not added to the global context map
    INFO: This variable EM_EAR_LOC is not added to the global context map
    INFO: This variable EMDROOT is not added to the global context map
    INFO: Adding the variable s_oc4jAdmPasswd to the aggregate oracle.sysman.console.db
    INFO: Adding the variable s_oc4jAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
    INFO: This variable s_launchBrowserClasspath is not added to the global context map
    INFO: This variable s_javapOracleHome is not added to the global context map
    INFO: This variable PROD_HOME is not added to the global context map
    INFO: Handling the storing of variables for aggr name oracle.assistants.server
    INFO: This variable s_operatingSystem is not added to the global context map
    INFO: This variable s_jreLocation is not added to the global context map
    INFO: This variable pn_dboffset is not added to the global context map
    INFO: This variable cs_swingName is not added to the global context map
    INFO: This variable cs_komodoName is not added to the global context map
    INFO: This variable cs_kodiakName is not added to the global context map
    INFO: This variable cs_jewtName is not added to the global context map
    INFO: This variable cs_iceBrowserName is not added to the global context map
    INFO: This variable cs_ewtcompatName is not added to the global context map
    INFO: This variable cs_ewtName is not added to the global context map
    INFO: This variable cs_baliShareName is not added to the global context map
    INFO: This variable b_orabaseContainsOrahome is not added to the global context map
    INFO: This variable b_isWINDOWS is not added to the global context map
    INFO: This variable b_isUNIX is not added to the global context map
    INFO: This variable sl_dbmaParameterListForIcon is not added to the global context map
    INFO: This variable sl_dbcaParameterListForIcon is not added to the global context map
    INFO: This variable s_xmlparservLoc is not added to the global context map
    INFO: This variable s_ouiJlibLocation is not added to the global context map
    INFO: This variable s_oratabLocation is not added to the global context map
    INFO: This variable s_opsmLocation is not added to the global context map
    INFO: This variable s_dbuaLocation is not added to the global context map
    INFO: This variable s_dbcaLocation is not added to the global context map
    INFO: This variable s_OracleBinLocation is not added to the global context map
    INFO: This variable s_dbcaInstLaunchFile is not added to the global context map
    INFO: This variable s_dbcaLaunchFile is not added to the global context map
    INFO: This variable s_dbmaLaunchFile is not added to the global context map
    INFO: This variable s_dbmaInstLaunchFile is not added to the global context map
    INFO: This variable PROD_HOME is not added to the global context map
    INFO: ORACLE_HOME is not settable, hence not setting the value
    INFO: {Parameter:TOPLEVEL_COMPONENT in {Aggregate:OuiConfigVariables:1.0.0.0.0:common}}: Parameter data type is not compatible with the provided String Array.
    INFO: passing params to cf done
    INFO: done saving info by cf
    INFO: This is a shared oracle home or remote nodes are null. No copy required.
    INFO: Checkpoint:Failed Checkpoint found returning it for getAllFailedCheckPoints.
    INFO: Checkpoint:Failed Checkpoint found returning null for getLastFailedCheckPoint.
    INFO: Checkpoint:Index file written and updated
    INFO: Checkpoint:Transfer of file done from remote node
    INFO: Updating the global context
    INFO: Path To 'globalcontext.xml' = C:\app\User\product\11.2.0\dbhome_1\install\chainedInstall\globalcontext
    INFO: Since operation was successful, move the current OiicAPISessionDetails to installed list
    INFO: Number of root scripts to be executed = 0
    INFO: isSuccessfullInstallation: true
    INFO: isSuccessfullRemoteInstallation: true
    INFO: Adding ExitStatus SUCCESS to the exit status set
    INFO: Completed setting up InstallDB
    INFO: Performing Configuration
    INFO: Entering ConfigClient.init method
    INFO: ConfigClient.init sOracleHomeLoc=C:\app\User\product\11.2.0\dbhome_1, sTopAggId=oracle.server
    INFO: Entering ConfigClient.initClientAndSession method
    INFO: ConfigClient.initClientAndSession status : connected to the config framework
    INFO: ConfigClient.initClientAndSession session begun oracle.sysman.emCfg.client.CfwSession@5059a331
    INFO: ConfigClient.initClientAndSession m_oAggregate=[Loracle.sysman.emCfg.common.IAggregate;@2ce90f2d
    INFO: Configuration log directory - C:\app\User\product\11.2.0\dbhome_1\cfgtoollogs
    INFO: Exiting ConfigClient.init method
    INFO: Calling event ConfigSessionInitialized
    INFO: ConfigClient.registerOutErrStream method called
    INFO: Entering ConfigClient.getToolsList method
    INFO: Created config job for Oracle Net Configuration Assistant
    INFO: Created config job for Oracle Database Configuration Assistant
    INFO: Created config job for Oracle Configuration Manager Configuration
    INFO: Updating Transient Parameters in the Aggregates
    INFO: Updating Transient Parameters for oracle.server
    INFO: Updating Transient Parameters for oracle.assistants.netca.client
    INFO: Updating Transient Parameters for oracle.assistants.server
    INFO: Setting value to transient variable s_dbcaArgs
    INFO: Setting value to transient variable S_SYSMANPASSWORD
    INFO: Setting value to transient variable s_systemPasswordFlag
    INFO: Setting value to transient variable s_sysmanPasswordFlag
    INFO: Setting value to transient variable S_HOSTUSERPASSWORD
    INFO: Setting value to transient variable s_dbcaArgsOverride
    INFO: Setting value to transient variable windows_commandline_prefix
    INFO: Setting value to transient variable s_sysPasswordFlag
    INFO: Setting value to transient variable S_SYSPASSWORD
    INFO: Setting value to transient variable s_asmsnmpPasswordFlag
    INFO: Setting value to transient variable S_DBSNMPPASSWORD
    INFO: Setting value to transient variable s_dbsnmpPasswordFlag
    INFO: Setting value to transient variable S_ASMSNMPPASSWORD
    INFO: Setting value to transient variable S_SYSTEMPASSWORD
    INFO: Setting value to transient variable s_hostUserPasswordFlag
    INFO: Updating Transient Parameters for OuiConfigVariables
    INFO: Updating Transient Parameters for oracle.sysman.ccr
    INFO: Updating Transient Parameters for oracle.sysman.console.db
    INFO: Successfully updated Transient Parameters in the Aggregates
    INFO: Configuration log directory - C:\app\User\product\11.2.0\dbhome_1\cfgtoollogs
    INFO:
    The Runconfig command constructed is C:\app\User\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\app\User\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=true $*
    INFO: Created a new file C:\app\User\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands
    INFO: Since the option is to overwrite the existing C:\app\User\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands file, backing it up
    INFO: The backed up file name is C:\app\User\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands.bak
    INFO: Entering ConfigClient.executeToolsInAggregate method
    INFO: ConfigClient.executeToolsInAggregate oAggregate=oracle.server:oracle.server:11.2.0.1.0:common
    INFO: Entering ConfigClient.assignAction method
    INFO: ConfigClient.assignAction actionref=[Loracle.sysman.emCfg.common.IActionReference;@74247cc2
    INFO: ConfigClient.assignAction action is of type :configuration
    INFO: Exiting ConfigClient.assignAction method
    INFO: ConfigClient.executeToolsInAggregate action assigned
    INFO: Started Plugin named: Oracle Net Configuration Assistant
    INFO: Found associated job
    INFO: Starting 'Oracle Net Configuration Assistant'
    INFO: Starting 'Oracle Net Configuration Assistant'
    INFO: INFO: Parsing command line arguments:INFO: Parameter "orahome" = C:\app\User\product\11.2.0\dbhome_1INFO: Parameter "orahnam" = OraDb11g_home1INFO: Parameter "instype" = typicalINFO: Parameter "inscomp" = client,oraclenet,javavm,server,anoINFO: Parameter "insprtcl" = tcp,nmpINFO: Parameter "cfg" = localINFO: Parameter "authadp" = NO_VALUEINFO: Parameter "responsefile" = C:\app\User\product\11.2.0\dbhome_1\network\install\netca_typ.rspINFO: Parameter "silent" = trueINFO: Done parsing command line arguments.INFO: Oracle Net Services Configuration:INFO: Profile configuration complete.INFO: Oracle Net Listener Startup:INFO: Running Listener Control:
    INFO: C:\app\User\product\11.2.0\dbhome_1\bin\lsnrctl start LISTENERINFO: Listener Control complete.INFO: Setting Listener service to start automatically.INFO: Listener started successfully.INFO: Listener configuration complete.INFO: Default local naming configuration complete.INFO: Oracle Net Services configuration successful. The exit code is 0WARNING:
    INFO:
    INFO: Completed Plugin named: Oracle Net Configuration Assistant
    INFO:
    INFO:
    INFO: Started Plugin named: Oracle Database Configuration Assistant
    INFO: Found associated job
    INFO: Starting 'Oracle Database Configuration Assistant'
    INFO: Starting 'Oracle Database Configuration Assistant'
    INFO: Executing DBCA
    INFO: Command C:\Windows\system32\cmd /c call C:\app\User\product\11.2.0\dbhome_1\bin\dbca.bat -progress_only -createDatabase -templateName General_Purpose.dbc -sid orcl -gdbName orcl.168.2.5 -emConfiguration LOCAL -storageType FS -datafileDestination C:\app\User\oradata -datafileJarLocation C:\app\User\product\11.2.0\dbhome_1/assistants/dbca/templates -responseFile NO_VALUE -characterset AL32UTF8 -obfuscatedPasswords false -sampleSchema true -automaticMemoryManagement true -totalMemory 3237 -maskPasswords false -oui_internal
    INFO: ... GenericInternalPlugIn.handleProcess() entered.
    INFO: ... GenericInternalPlugIn: getting configAssistantParmas.
    INFO: ... GenericInternalPlugIn: checking secretArguments.
    INFO: ... GenericInternalPlugIn: starting read loop.
    INFO: Read: SYS_PASSWORD_PROMPT
    INFO: Processing: SYS_PASSWORD_PROMPT for argument tag -sysPassword
    INFO: Read: SYSTEM_PASSWORD_PROMPT
    INFO: Processing: SYSTEM_PASSWORD_PROMPT for argument tag -systemPassword
    INFO: Read: DBSNMP_PASSWORD_PROMPT
    INFO: Processing: DBSNMP_PASSWORD_PROMPT for argument tag -dbsnmpPassword
    INFO: Read: SYSMAN_PASSWORD_PROMPT
    INFO: Processing: SYSMAN_PASSWORD_PROMPT for argument tag -sysmanPassword
    INFO: End of argument passing to stdin
    INFO: Completed Plugin named: Oracle Database Configuration Assistant
    INFO: Oracle Database Configuration Assistant failed.
    INFO: Oracle Database Configuration Assistant failed.
    INFO: ConfigClient.executeToolsInAggregate action performed
    INFO: Exiting ConfigClient.executeToolsInAggregate method
    INFO: Calling event ConfigToolsExecuted
    INFO:
    The Runconfig command constructed is C:\app\User\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\app\User\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=false $*
    INFO: Created a new file C:\app\User\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands
    INFO: Since the option is to overwrite the existing C:\app\User\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands file, backing it up
    INFO: The backed up file name is C:\app\User\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands.bak
    INFO: ConfigClient.saveSession method called
    INFO: Calling event ConfigSessionEnding
    INFO: ConfigClient.endSession method called
    INFO: Completed Configuration
    INFO: Shutting down OUISetupDriver.JobExecutorThread
    INFO: Cleaning up, please wait...
    INFO: Dispose the install area control object
    INFO: Update the state machine to STATE_CLEAN
    INFO: All forked task are completed at state setup
    INFO: Completed background operations
    INFO: Moved to state <setup>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Validating view at state <setup>
    INFO: Completed validating view at state <setup>
    INFO: Validating state <setup>
    WARNING: Validation disabled for the state setup
    INFO: Completed validating state <setup>
    INFO: Verifying route success
    INFO: Get view named [FinishUI]
    INFO: View for [FinishUI] is oracle.install.ivw.db.view.FinishUI@22d215
    INFO: Initializing view <FinishUI> at state <finish>
    INFO: Completed initializing view <FinishUI> at state <finish>
    INFO: Displaying view <FinishUI> at state <finish>
    INFO: Completed displaying view <FinishUI> at state <finish>
    INFO: Loading view <FinishUI> at state <finish>
    INFO: Install Succeeded: true
    INFO: Config Tool Succeeded: false
    INFO: Remote Install Succeeded: true
    INFO: Completed loading view <FinishUI> at state <finish>
    INFO: Localizing view <FinishUI> at state <finish>
    INFO: Completed localizing view <FinishUI> at state <finish>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Executing action at state finish
    INFO: FinishAction Actions.execute called
    INFO: Completed executing action at state <finish>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Moved to state <finish>
    INFO: Finding the most appropriate exit status for the current application
    INFO: Exit Status is 0
    INFO: Shutdown Oracle Database 11g Release 2 Installer
    Edited by: rnair on Mar 18, 2013 10:08 AM

    rnair wrote:
    I am trying to install Oracle 11g R2 on my windows 7, 64bit computer. After 42% of installation, it started showing some files are missing. Few of them are:
    C:\app\User\product\11.2.0\dbhome_1\owb\external\oc4j_applications\applications\WFMLRSVCApp.ear
    C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\WFMLRSVCApp.ear
    C:\app\User\product\11.2.0\dbhome_1\owb\external\oc4j_applications\applications\WFMGRApp.ear
    C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\WFMGRApp.ear
    C:\app\User\product\11.2.0\dbhome_1\owb\bin\win32\owb.tmp
    C:\app\User\product\11.2.0\dbhome_1\owb\bin\win32\setowbenv.tmp
    C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\system-application.xml
    And the final pop up winow says:
    Database configuration Assistant:Info
    *"Template General_Purpose.dbc does not exists. Please specify an exixting template for database creation"*
    *"[INS-20802] Oracle Database Configuration Assistant failed"*
    Details:
    Cause:- The plug-in failed in its perform method
    Action:- Refer to the logs or contact Oracle Support Services.
    Following are the last few lines of the log file. Can anyone please help me to fix this problem?<snip>
    the error has nothing to do with DBCA. DBCA was simply the last in a long string of victims.
    Go back and read the instructions where you downloaded the install media. They state that the TWO zip files you download must be unzipped into the same directory.

  • Ins - 20802 Oracle Net Configuration Assistant failed error on HP UX IA

    Hi Folks,
    I am facing a problem while installing Oracle 11gR2 on HP UX Itanium 11.31. As the progress bar shows 95% while setting up the database, it fails at the Oracle Net Configuration Assistant setup.
    The log has the following:
    INFO: Starting 'Oracle Net Configuration Assistant'
    INFO: Starting 'Oracle Net Configuration Assistant'
    INFO: UnsatisfiedLinkError exception loading native library: njni11
    INFO: java.lang.UnsatisfiedLinkError: /database/home/oracle/app/oracle/product/11.2.0/dbhome_1/lib/libnjni11.so: Unable to find library 'libclntsh.so.11.1'.
    INFO: Error: jniGetOracleHome
    INFO: Oracle Net Services configuration failed. The exit code is 1
    WARNING: java.lang.UnsatisfiedLinkError: jniGetOracleHome
    WARNING: at oracle.net.common.NetGetEnv.jniGetOracleHome(Native Method)
    WARNING: at oracle.net.common.NetGetEnv.getOracleHome(Unknown Source)
    WARNING: at oracle.net.ca.NetCALogger.getOracleHome(NetCALogger.java:230)
    WARNING: at oracle.net.ca.NetCALogger.initOracleParameters(NetCALogger.java:215)
    WARNING: at oracle.net.ca.NetCALogger.initLogger(NetCALogger.java:130)
    WARNING: at oracle.net.ca.NetCA.main(NetCA.java:404)
    INFO:
    WARNING:
    INFO: Completed Plugin named: Oracle Net Configuration Assistant
    INFO: Oracle Net Configuration Assistant failed.
    INFO: Oracle Net Configuration Assistant failed.
    INFO: ConfigClient.executeSelectedToolsInAggregate action performed
    INFO: Exiting ConfigClient.executeSelectedToolsInAggregate method
    INFO:
    The Runconfig command constructed is /database/home/oracle/app/oracle/product/11.2.0/dbhome_1/oui/bin/runConfig.sh ORACLE_HOME=/database/home/oracle/app/oracle/product/11.2.0/dbhome_1 MODE=perform ACTION=configure RERUN=false $*
    INFO: Since the option is to overwrite the existing /database/home/oracle/app/oracle/product/11.2.0/dbhome_1/cfgtoollogs/configToolFailedCommands file, backing it up
    INFO: The backed up file name is /database/home/oracle/app/oracle/product/11.2.0/dbhome_1/cfgtoollogs/configToolFailedCommands.bak.3
    INFO: ConfigClient.saveSession method called
    INFO: Calling event ConfigSessionEnding
    INFO: ConfigClient.endSession method called
    INFO: Completed Configuration
    INFO: Finding the most appropriate exit status for the current application
    INFO: Exit Status is 0
    INFO: Shutdown Oracle Database 11g Release 2 Installer
    I have no clue of what this means. I tried searching everywhere about this issue but wasn't getting the correct link for HP UX.
    Would really appreciate any help in this regards. Thanks in advance.

    Hello,
    INFO: UnsatisfiedLinkError exception loading native library: njni11
    INFO: java.lang.UnsatisfiedLinkError: /database/home/oracle/app/oracle/product/11.2.0/dbhome_1/lib/libnjni11.so: Unable to find library 'libclntsh.so.11.1'.It seems that you have some missing library or may be you lack some permission to a library.
    Best regards,
    Jean-Valentin

Maybe you are looking for

  • Desktop 4.5, 4.6 and 4.7 will no longer recognize my 8330

    For some reason, Desktop 4.5 just stopped recognizing my BB 8330 when I plugged in the USB cable and had Desktop running at the time. I have removed and reinstalled desktop software versions 4.5, 4.6 and 4.7 to no avail. I have swapped USB cables as

  • How to capture pc screen in real time?

    Hi, recently i have been asked to make a java program that captures the pc screen and shows it, in real time, either in the same pc or another pc over the local network. To do this program, i could easilly make one that takes multiple pics of the scr

  • Phone not working properly

     Iam using E 72. I have done the soft ware updation myself thru net. But still the phone is not working properly. While using the tutorilas, the graphics are coming but not the description. 

  • Overhead costs

    Dear friends,      I need your input to capture overhead costs involved while executing production order. While preparing for product costing, it includes material cost and internal activity costs(means secondary cost elements). But i wants to captur

  • How to see Planned Purchase Order in Buyer Work Center

    Hello, I need to see Planned Purchase Order (created in Purchasing Super User(responsibility) => Purchase Order -> Purchase Order , Type (Planned Purchase Order)) in Buyer Work Centre. I can see Standard Purchase Order in Buyer Work Center (under Ord