Xserve Cluster node does not (really) switch on

Hi.
I've got a pretty strange problem.
Today, after a long break, I have tried to switch on my Xserve G5 cluster node. The yellow ID light was constantly on, the power light was white, machine was powered on, and nothing happened. It did not boot, did not fail -- just sat there with both lights on.
Then, I tried to get into OF by using panel lights method -- it didn't work. No matter how long I was keeping status button pressed after a power on, nothing happened -- none of the activity lights were on or flashing.
Next thing I tried to do was to reset a PMU.
After that the situation is exactly the same except that the power light is no longer on -- although the machine starts up and the status light is on. I am still not able to enter any OF commands using front panel.
All in all, it looks like the bootstrap processor is on, but none of the G5s is getting up (for example, even if I take out all of the memory, nothing changes and no failures are indicated)
Any ideas?

Try this:
1 - Remove the battery from the machine for 24 hours. Replace.
2 - Reset the PMU.
3 - Try to boot.
If you still have a problem, disconnect the firewire cable from the front panel. Try to boot.
If you STILL have a problem, you're at the hardware change stage. It could be a number of problems, but it's likely either the main logic board, the power supply, or the front panel board.

Similar Messages

  • 11gR2 Cluster node does not start, start of ora.gipcd fails

    Hi
    I have a clusert node which just does not start, and i do know understand what the problem is.
    Does anyone have an idea what the problem cound be?
    I am using Oracle 11.2.0.1.0 on OEL.
    I appreciate any help, thank you.
    Regards Bernhard
    NAME           TARGET  STATE        SERVER                   STATE_DETAILS      
    Cluster Resources
    ora.asm
          1        ONLINE  OFFLINE                                                  
    ora.crsd
          1        ONLINE  INTERMEDIATE node001                             
    ora.cssd
          1        ONLINE  OFFLINE                                                  
    ora.cssdmonitor
          1        ONLINE  OFFLINE                                                  
    ora.ctssd
          1        ONLINE  OFFLINE                                                  
    ora.diskmon
          1        ONLINE  OFFLINE                                                  
    ora.drivers.acfs
          1        ONLINE  ONLINE       node001                             
    ora.evmd
          1        ONLINE  OFFLINE                                                  
    ora.gipcd
          1        ONLINE  OFFLINE                                                  
    ora.gpnpd
          1        ONLINE  OFFLINE                                                  
    ora.mdnsd
          1        ONLINE  ONLINE       node001                              alertnode001.log
    Oracle Database 11g Clusterware Release 11.2.0.1.0 - Production Copyright 1996, 2009 Oracle. All rights reserved.
    2012-06-29 08:43:52.511
    [/opt/grid/product/11gR2/grid/bin/cssdmonitor(5144)]CRS-5822:Agent '/opt/grid/product/11gR2/grid/bin/cssdmonitor_root' disconnected from server. Details at (:CRSAGF00117:) in /opt/grid/product/11gR2/grid/log/node001/agent/ohasd/oracssdmonitor_root/oracssdmonitor_root.log.
    2012-06-29 08:48:49.713
    [ohasd(4346)]CRS-2112:The OLR service started on node node001.
    2012-06-29 08:48:50.010
    [ohasd(4346)]CRS-8017:location: /etc/oracle/lastgasp has 50 reboot advisory log files, 0 were announced and 0 errors occurred
    2012-06-29 08:48:55.134
    [ohasd(4346)]CRS-2772:Server 'node001' has been assigned to pool 'Free'.
    [client(4634)]CRS-10001:ACFS-9327: Verifying ADVM/ACFS devices.
    [client(4652)]CRS-10001:ACFS-9322: done.
    2012-06-29 08:50:59.362
    [ohasd(4346)]CRS-2757:Command 'Start' timed out waiting for response from the resource 'ora.gipcd'. Details at (:CRSPE00111:) in /opt/grid/product/11gR2/grid/log/node001/ohasd/ohasd.log.oracssdmonitor_root.log
    Oracle Database 11g Clusterware Release 11.2.0.1.0 - Production Copyright 1996, 2009 Oracle. All rights reserved.
    2012-06-29 08:48:51.003: [    AGFW][1810312288] Starting the agent: /opt/grid/product/11gR2/grid/log/node001/agent/ohasd/oracssdmonitor_root/
    2012-06-29 08:48:51.003: [   AGENT][1810312288] Agent framework initialized, Process Id = 4414
    2012-06-29 08:48:51.003: [ USRTHRD][1810312288] to enter agent main
    2012-06-29 08:48:54.939: [ USRTHRD][1810312288] clsncssd_main: setting priority to 4
    2012-06-29 08:48:54.939: [ USRTHRD][1810312288]  *** Agent Framework Started ***
    2012-06-29 08:48:54.939: [ USRTHRD][1810312288] clsncssd_vmondisv: Compatible vendor clusterware not in use
    2012-06-29 08:48:54.939: [ USRTHRD][1810312288] clsncssd_thrdspawn: spawn OMON succ
    2012-06-29 08:48:54.939: [ USRTHRD][1810312288] clsncssd_main: spawn omon succ
    2012-06-29 08:48:54.939: [ USRTHRD][1098914112] clsnomon_main: default values for omon, initrate 1000, pollrate 500.
    2012-06-29 08:48:54.939: [ USRTHRD][1098914112] clsnomon_main: starting omon
    2012-06-29 08:48:54.942: [ CSSCLNT][1098914112]clssscConnect: gipc request failed with 29 (0x16)
    2012-06-29 08:48:54.942: [ CSSCLNT][1098914112]clsssInitNative: connect failed, rc 29
    2012-06-29 08:48:55.041: [    AGFW][1810312288] SERVER IPC CONNECT STR: (ADDRESS=(PROTOCOL=IPC)(KEY=OHASD_IPC_SOCKET_11))
    2012-06-29 08:48:55.041: [CLSFRAME][1810312288] Inited lsf context 0x1ae1cdd0
    2012-06-29 08:48:55.041: [CLSFRAME][1810312288] Initing CLS Framework messaging
    2012-06-29 08:48:55.041: [CLSFRAME][1810312288] New Framework state: 2
    2012-06-29 08:48:55.041: [CLSFRAME][1810312288] M2M is starting...
    2012-06-29 08:48:55.047: [ CRSCOMM][1810312288] m_pClscCtx=0x1ae21d70m_pUgblm=0x1ae754b0
    2012-06-29 08:48:55.047: [ CRSCOMM][1810312288] Starting send thread
    2012-06-29 08:48:55.052: [ CRSCOMM][1119893824] clsIpc: sendWork thread started.
    2012-06-29 08:48:55.057: [ CRSCOMM][1130383680] IPC Client thread started listening
    2012-06-29 08:48:55.057: [ CRSCOMM][1130383680] init data sent from server
    2012-06-29 08:48:55.057: [CLSFRAME][1810312288] New IPC Member:{Relative|Node:0|Process:0|Type:2}:OHASD:node001
    2012-06-29 08:48:55.058: [CLSFRAME][1810312288] New process connected to us ID:{Relative|Node:0|Process:0|Type:2} Info:OHASD:node001
    2012-06-29 08:48:55.066: [CLSFRAME][1810312288] Starting thread model named: MultiThread
    2012-06-29 08:48:55.073: [CLSFRAME][1810312288] Starting thread model named: SingleThread
    2012-06-29 08:48:55.076: [CLSFRAME][1810312288] Starting thread model named: SingleThreadT
    2012-06-29 08:48:55.080: [CLSFRAME][1810312288] New Framework state: 3
    2012-06-29 08:48:55.080: [    AGFW][1810312288] Agent Framework started successfully
    2012-06-29 08:48:55.080: [    AGFW][1182832960] Agfw engine module has enabled...
    2012-06-29 08:48:55.080: [CLSFRAME][1182832960] Module Enabling is complete
    2012-06-29 08:48:55.080: [CLSFRAME][1182832960] New Framework state: 6
    2012-06-29 08:48:55.080: [    AGFW][1182832960] Agent is started with userid: root , expected user: root
    2012-06-29 08:48:55.081: [    AGFW][1182832960] Agent sending message to PE: AGENT_HANDSHAKE[Proxy] ID 20484:14
    2012-06-29 08:48:55.088: [    AGFW][1182832960] Agent received the message: RESTYPE_ADD[ora.cssdmonitor.type] ID 8196:299
    2012-06-29 08:48:55.089: [    AGFW][1182832960] Added new restype: ora.cssdmonitor.type
    2012-06-29 08:48:55.089: [    AGFW][1182832960] Agent sending last reply for: RESTYPE_ADD[ora.cssdmonitor.type] ID 8196:299
    2012-06-29 08:48:55.090: [    AGFW][1182832960] Agent received the message: RESOURCE_ADD[ora.cssdmonitor 1 1] ID 4356:301
    2012-06-29 08:48:55.090: [    AGFW][1182832960] Added new resource: ora.cssdmonitor 1 1 to the agfw
    2012-06-29 08:48:55.091: [    AGFW][1182832960] Agent sending last reply for: RESOURCE_ADD[ora.cssdmonitor 1 1] ID 4356:301
    2012-06-29 08:48:55.091: [    AGFW][1182832960] Agent received the message: RESOURCE_PROBE[ora.cssdmonitor 1 1] ID 4097:302
    2012-06-29 08:48:55.091: [    AGFW][1182832960] Preparing CHECK command for: ora.cssdmonitor 1 1
    2012-06-29 08:48:55.096: [    AGFW][1172343104] Executing command: check for resource: ora.cssdmonitor 1 1
    2012-06-29 08:48:55.096: [ora.cssdmonitor][1172343104] [check] clsncssd_getattr: attr OMON_INITRATE, value 1000
    2012-06-29 08:48:55.096: [ora.cssdmonitor][1172343104] [check] clsncssd_getattr: attr OMON_POLLRATE, value 500
    2012-06-29 08:48:55.096: [ora.cssdmonitor][1172343104] [check] clsncssd_getattr: attr ORA_OPROCD_MODE, value
    2012-06-29 08:48:55.096: [ora.cssdmonitor][1172343104] [check] clsncssd_getattr: attr PROCD_TIMEOUT, value 1000
    2012-06-29 08:48:55.096: [ora.cssdmonitor][1172343104] [check] clsncssd_getattr: attr LOGGING_LEVEL, value 1
    2012-06-29 08:48:55.096: [    AGFW][1172343104] check for resource: ora.cssdmonitor 1 1 completed with status: OFFLINE
    2012-06-29 08:48:55.096: [CRSTIMER][1203812672] Timer Thread Starting.
    2012-06-29 08:48:55.096: [    AGFW][1182832960] ora.cssdmonitor 1 1 state changed from: UNKNOWN to: OFFLINE
    2012-06-29 08:48:55.096: [    AGFW][1182832960] Agent sending last reply for: RESOURCE_PROBE[ora.cssdmonitor 1 1] ID 4097:302
    2012-06-29 08:48:55.096: [    AGFW][1182832960] Agent has no resources to be monitored.Sending suicide request.
    2012-06-29 08:48:55.096: [    AGFW][1182832960] Agent sending message to PE: AGENT_SUICIDE[Proxy] ID 20486:28
    2012-06-29 08:48:55.100: [    AGFW][1182832960] Agent received the message: RESOURCE_DELETE[ora.cssdmonitor 1 1] ID 4358:317
    2012-06-29 08:48:55.100: [    AGFW][1182832960] Agent sending last reply for: RESOURCE_DELETE[ora.cssdmonitor 1 1] ID 4358:317
    2012-06-29 08:48:55.100: [    AGFW][1182832960] Agent has no resources to be monitored.Sending suicide request.
    2012-06-29 08:48:55.100: [    AGFW][1182832960] Agent sending message to PE: AGENT_SUICIDE[Proxy] ID 20486:34
    2012-06-29 08:48:55.101: [    AGFW][1182832960] ora.cssdmonitor 1 1 marked as deleted.
    2012-06-29 08:48:55.101: [    AGFW][1182832960] Deleting the resource: ora.cssdmonitor 1 1
    2012-06-29 08:48:55.101: [    AGFW][1182832960] Agent is commiting suicide.
    2012-06-29 08:48:55.101: [ USRTHRD][1182832960] clsncssd_exit: CSSD Agent was asked to exit with exit code 1
    2012-06-29 08:48:55.101: [ USRTHRD][1182832960] clsncssd_becomeactive: Signaling active state
    2012-06-29 08:48:55.101: [ USRTHRD][1182832960] clsncssd_term: still threads up (1)
    2012-06-29 08:48:55.101: [ USRTHRD][1182832960] clsncssd_exit: Agent is done.
    2012-06-29 08:48:55.101: [    AGFW][1182832960] Agent is exiting with exit code: 1
    2012-06-29 08:48:55.947: [ CSSCLNT][1098914112]clssscConnect: gipc request failed with 29 (0x16)
    2012-06-29 08:48:55.947: [ CSSCLNT][1098914112]clsssInitNative: connect failed, rc 29
    2012-06-29 08:48:56.952: [ CSSCLNT][1098914112]clssscConnect: gipc request failed with 29 (0x16)
    2012-06-29 08:48:56.952: [ CSSCLNT][1098914112]clsssInitNative: connect failed, rc 29Edited by: Bernhard W on 03-Jul-2012 02:14

    I am really getting desperate about this.
    The ASM persmissions are on both nodes the same, so this should not be the problem and i can not find any problem on the network.
    The log files of the healthy node do not say anything about the node which does not startup now, the last log entry was from 6 months ago, when i shut that node down. There seems to be no communication between the two nodes now.
    I tried to manually start the ora.cssd but somehow ora.gipcd just does not start and i can not find the problem.
    [oracle@dmrs11srvcla001 ~]$ crsctl stat res -t -init
    NAME           TARGET  STATE        SERVER                   STATE_DETAILS      
    Cluster Resources
    ora.asm
          1        ONLINE  OFFLINE                                                  
    ora.crsd
          1        ONLINE  INTERMEDIATE dmrs11srvcla001                             
    ora.cssd
          1        ONLINE  OFFLINE                                                  
    ora.cssdmonitor
          1        ONLINE  ONLINE       dmrs11srvcla001                             
    ora.ctssd
          1        ONLINE  OFFLINE                                                  
    ora.diskmon
          1        OFFLINE OFFLINE                                                  
    ora.drivers.acfs
          1        ONLINE  ONLINE       dmrs11srvcla001                             
    ora.evmd
          1        ONLINE  OFFLINE                                                  
    ora.gipcd
          1        ONLINE  OFFLINE                                                  
    ora.gpnpd
          1        ONLINE  OFFLINE                                                  
    ora.mdnsd
          1        ONLINE  ONLINE       dmrs11srvcla001                             
    [oracle@dmrs11srvcla001 ~]$ crsctl start res ora.cssd -init
    CRS-2672: Attempting to start 'ora.gipcd' on 'dmrs11srvcla001'
    Start action for daemon aborted
    CRS-2674: Start of 'ora.gipcd' on 'dmrs11srvcla001' failed
    CRS-2679: Attempting to clean 'ora.gipcd' on 'dmrs11srvcla001'
    CRS-2681: Clean of 'ora.gipcd' on 'dmrs11srvcla001' succeeded
    CRS-2672: Attempting to start 'ora.gpnpd' on 'dmrs11srvcla001'
    Start action for daemon aborted
    CRS-2674: Start of 'ora.gpnpd' on 'dmrs11srvcla001' failed
    CRS-2679: Attempting to clean 'ora.gpnpd' on 'dmrs11srvcla001'
    CRS-2681: Clean of 'ora.gpnpd' on 'dmrs11srvcla001' succeeded
    CRS-2672: Attempting to start 'ora.cssd' on 'dmrs11srvcla001'
    CRS-2672: Attempting to start 'ora.diskmon' on 'dmrs11srvcla001'
    CRS-2676: Start of 'ora.diskmon' on 'dmrs11srvcla001' succeededalertnode001.log
    [ohasd(4351)]CRS-2757:Command 'Start' timed out waiting for response from the resource 'ora.gipcd'. Details at (:CRSPE00111:) in /opt/grid/product/11gR2/grid/log/node001/ohasd/ohasd.log.
    2012-07-02 17:11:40.789
    [ohasd(4351)]CRS-2757:Command 'Start' timed out waiting for response from the resource 'ora.gpnpd'. Details at (:CRSPE00111:) in /opt/grid/product/11gR2/grid/log/node001/ohasd/ohasd.log.
    2012-07-02 17:11:41.654
    [ohasd(4351)]CRS-2765:Resource 'ora.mdnsd' has failed on server 'node001'.
    2012-07-02 17:11:43.404
    [cssd(4997)]CRS-1713:CSSD daemon is started in clustered mode
    2012-07-02 17:11:46.634
    [cssd(4997)]CRS-2302:Cannot get GPnP profile. Error CLSGPNP_NO_DAEMON (GPNPD daemon is not running).
    2012-07-02 17:11:46.745
    [ohasd(4351)]CRS-2765:Resource 'ora.cssdmonitor' has failed on server 'node001'.
    2012-07-02 17:12:42.384
    [/opt/grid/product/11gR2/grid/bin/orarootagent.bin(4488)]CRS-5818:Aborted command 'start for resource: ora.diskmon 1 1' for resource 'ora.diskmon'. Details at (:CRSAGF00113:) in /opt/grid/product/11gR2/grid/log/node001/agent/ohasd/orarootagent_root/orarootagent_root.log.
    2012-07-02 17:12:46.390
    [ohasd(4351)]CRS-2757:Command 'Start' timed out waiting for response from the resource 'ora.diskmon'. Details at (:CRSPE00111:) in /opt/grid/product/11gR2/grid/log/node001/ohasd/ohasd.log.
    2012-07-02 17:14:50.768
    [ohasd(4351)]CRS-2757:Command 'Start' timed out waiting for response from the resource 'ora.gipcd'. Details at (:CRSPE00111:) in /opt/grid/product/11gR2/grid/log/node001/ohasd/ohasd.log.
    2012-07-02 17:16:55.819
    [ohasd(4351)]CRS-2757:Command 'Start' timed out waiting for response from the resource 'ora.gpnpd'. Details at (:CRSPE00111:) in /opt/grid/product/11gR2/grid/log/node001/ohasd/ohasd.log.
    2012-07-02 17:16:58.354
    [cssd(5137)]CRS-1713:CSSD daemon is started in clustered mode
    2012-07-02 17:16:58.425
    [cssd(5137)]CRS-2302:Cannot get GPnP profile. Error CLSGPNP_NO_DAEMON (GPNPD daemon is not running).
    2012-07-02 17:25:23.194
    [ohasd(4351)]CRS-2765:Resource 'ora.diskmon' has failed on server 'node001'.
    2012-07-02 17:25:23.200
    [ohasd(4351)]CRS-2767:Target resource 'ora.diskmon' is offline, will not recover.
    2012-07-02 17:26:57.384
    [/opt/grid/product/11gR2/grid/bin/cssdagent(5116)]CRS-5818:Aborted command 'start for resource: ora.cssd 1 1' for resource 'ora.cssd'. Details at (:CRSAGF00113:) in /opt/grid/product/11gR2/grid/log/node001/agent/ohasd/oracssdagent_root/oracssdagent_root.log.
    2012-07-02 17:27:02.514
    [ohasd(4351)]CRS-2757:Command 'Start' timed out waiting for response from the resource 'ora.cssd'. Details at (:CRSPE00111:) in /opt/grid/product/11gR2/grid/log/node001/ohasd/ohasd.log.
    2012-07-02 17:37:11.971
    [ohasd(4351)]CRS-2757:Command 'Start' timed out waiting for response from the resource 'ora.evmd'. Details at (:CRSPE00111:) in /opt/grid/product/11gR2/grid/log/node001/ohasd/ohasd.log.
    [ohasd(4351)]CRS-2765:Resource 'ora.crsd' has failed on server 'node001'.
    2012-07-03 02:13:57.821
    [ohasd(4351)]CRS-2765:Resource 'ora.crsd' has failed on server 'node001'.
    2012-07-03 05:14:37.915
    [ohasd(4351)]CRS-2765:Resource 'ora.crsd' has failed on server 'node001'.
    2012-07-03 05:44:44.630
    [ohasd(4351)]CRS-2765:Resource 'ora.crsd' has failed on server 'node001'.
    2012-07-03 06:14:51.303
    [ohasd(4351)]CRS-2765:Resource 'ora.crsd' has failed on server 'node001'.
    2012-07-03 06:44:57.981
    [ohasd(4351)]CRS-2765:Resource 'ora.crsd' has failed on server 'node001'.
    2012-07-03 07:15:04.655
    [ohasd(4351)]CRS-2765:Resource 'ora.crsd' has failed on server 'node001'.
    2012-07-03 07:42:45.015
    [ohasd(4351)]CRS-2757:Command 'Start' timed out waiting for response from the resource 'ora.gipcd'. Details at (:CRSPE00111:) in /opt/grid/product/11gR2/grid/log/node001/ohasd/ohasd.log.
    2012-07-03 07:44:50.068
    [ohasd(4351)]CRS-2757:Command 'Start' timed out waiting for response from the resource 'ora.gpnpd'. Details at (:CRSPE00111:) in /opt/grid/product/11gR2/grid/log/node001/ohasd/ohasd.log.
    2012-07-03 07:44:52.369
    [cssd(10209)]CRS-1713:CSSD daemon is started in clustered mode
    2012-07-03 07:44:52.434
    [cssd(10209)]CRS-2302:Cannot get GPnP profile. Error CLSGPNP_NO_DAEMON (GPNPD daemon is not running).
    2012-07-03 07:45:11.331
    [ohasd(4351)]CRS-2765:Resource 'ora.crsd' has failed on server 'node001'.
    2012-07-03 07:53:17.222
    [ohasd(4351)]CRS-2765:Resource 'ora.diskmon' has failed on server 'node001'.
    2012-07-03 07:53:17.222
    [ohasd(4351)]CRS-2767:Target resource 'ora.diskmon' is offline, will not recover.
    2012-07-03 07:54:51.401
    [/opt/grid/product/11gR2/grid/bin/cssdagent(10188)]CRS-5818:Aborted command 'start for resource: ora.cssd 1 1' for resource 'ora.cssd'. Details at (:CRSAGF00113:) in /opt/grid/product/11gR2/grid/log/node001/agent/ohasd/oracssdagent_root/oracssdagent_root.log.
    2012-07-03 07:54:56.524
    [ohasd(4351)]CRS-2757:Command 'Start' timed out waiting for response from the resource 'ora.cssd'. Details at (:CRSPE00111:) in /opt/grid/product/11gR2/grid/log/node001/ohasd/ohasd.log.ohasd.log
    2012-07-03 07:45:11.330: [    AGFW][1347250496] Agfw Proxy Server received the message: RESOURCE_STATUS[Proxy] ID 20481:24919
    2012-07-03 07:45:11.330: [    AGFW][1347250496] Received state change for ora.crsd 1 1 [old state = PARTIAL, new state = OFFLINE]
    2012-07-03 07:45:11.330: [    AGFW][1347250496] Agfw Proxy Server sending message to PE, Contents = [MIDTo:2|OpID:3|FromA:{Invalid|Node:0|Process:0|Type:0}|ToA:{Invalid|Node:-1|Process:-1|Type:-1}|MIDFrom:0|Type:4|Pri2|Id:23258]
    2012-07-03 07:45:11.330: [    AGFW][1347250496] Agfw Proxy Server replying to the message: RESOURCE_STATUS[Proxy] ID 20481:24919
    2012-07-03 07:45:11.330: [   CRSPE][1357756736] State change received from node001 for ora.crsd 1 1
    2012-07-03 07:45:11.331: [   CRSPE][1357756736] Processing PE command id=139. Description: [Resource State Change (ora.crsd 1 1) : 0x1c284d40]
    2012-07-03 07:45:11.331: [   CRSPE][1357756736] RI [ora.crsd 1 1] new external state [OFFLINE] old value: [INTERMEDIATE] on node001 label = []
    2012-07-03 07:45:11.331: [   CRSPE][1357756736] Resource Resource Instance ID[ora.crsd 1 1]. Values:
    STATE=OFFLINE
    TARGET=ONLINE
    LAST_SERVER=node001
    CURRENT_RCOUNT=1
    LAST_RESTART=1341292505
    FAILURE_COUNT=0
    FAILURE_HISTORY=
    STATE_DETAILS=
    INCARNATION=29
    STATE_CHANGE_VERS=29
    LAST_FAULT=1341292504
    DEGREE_ID=1
    ID=ora.crsd 1 1
    CARDINALITY_ID=1
    Lock Info:
    Write Locks:none
    ReadLocks:|STATE INITED||INITIAL CHECK DONE| has failed!
    2012-07-03 07:45:11.331: [   CRSPE][1357756736] Processing unplanned state change for [ora.crsd 1 1]
    2012-07-03 07:45:11.331: [   CRSPE][1357756736] ora.crsd 1 1: uptime exceeds uptime threshold , resetting restart count
    2012-07-03 07:45:11.331: [   CRSPE][1357756736] Local Recovery picked for [ora.crsd 1 1]
    2012-07-03 07:45:11.333: [   CRSPE][1357756736] Sending message to agfw: id = 23260
    2012-07-03 07:45:11.333: [    AGFW][1347250496] Agfw Proxy Server received the message: RESOURCE_START[ora.crsd 1 1] ID 4098:23260
    2012-07-03 07:45:11.333: [   CRSPE][1357756736] CRS-2672: Attempting to start 'ora.crsd' on 'node001'
    2012-07-03 07:45:11.333: [    AGFW][1347250496] Agfw Proxy Server forwarding the message: RESOURCE_START[ora.crsd 1 1] ID 4098:23260 to the agent /opt/grid/product/11gR2/grid/bin/orarootagent_root
    2012-07-03 07:45:12.349: [    AGFW][1347250496] Received the reply to the message: RESOURCE_START[ora.crsd 1 1] ID 4098:23261 from the agent /opt/grid/product/11gR2/grid/bin/orarootagent_root
    2012-07-03 07:45:12.350: [    AGFW][1347250496] Agfw Proxy Server sending the reply to PE for message:RESOURCE_START[ora.crsd 1 1] ID 4098:23260
    2012-07-03 07:45:12.350: [   CRSPE][1357756736] Received reply to action [Start] message ID: 23260
    2012-07-03 07:45:12.350: [    AGFW][1347250496] Received the reply to the message: RESOURCE_START[ora.crsd 1 1] ID 4098:23261 from the agent /opt/grid/product/11gR2/grid/bin/orarootagent_root
    2012-07-03 07:45:12.350: [    AGFW][1347250496] Agfw Proxy Server sending the last reply to PE for message:RESOURCE_START[ora.crsd 1 1] ID 4098:23260
    2012-07-03 07:45:12.350: [   CRSPE][1357756736] Received reply to action [Start] message ID: 23260
    2012-07-03 07:45:12.351: [   CRSPE][1357756736] RI [ora.crsd 1 1] new external state [INTERMEDIATE] old value: [OFFLINE] on node001 label = []
    2012-07-03 07:45:12.351: [   CRSPE][1357756736] CRS-2676: Start of 'ora.crsd' on 'node001' succeeded
    2012-07-03 07:45:12.351: [   CRSPE][1357756736] PE Command [ Resource State Change (ora.crsd 1 1) : 0x1c284d40 ] has completed
    2012-07-03 07:45:12.351: [    AGFW][1347250496] Agfw Proxy Server received the message: CMD_COMPLETED[Proxy] ID 20482:23269
    2012-07-03 07:45:12.351: [    AGFW][1347250496] Agfw Proxy Server replying to the message: CMD_COMPLETED[Proxy] ID 20482:23269
    2012-07-03 07:45:12.351: [    AGFW][1347250496] Agfw received reply from PE for resource state change for ora.crsd 1 1
    2012-07-03 07:53:17.220: [    AGFW][1347250496] Agfw Proxy Server received the message: RESOURCE_STATUS[Proxy] ID 20481:25353
    2012-07-03 07:53:17.221: [    AGFW][1347250496] Received state change for ora.diskmon 1 1 [old state = ONLINE, new state = PLANNED_OFFLINE]
    2012-07-03 07:53:17.221: [    AGFW][1347250496] Agfw Proxy Server sending message to PE, Contents = [MIDTo:2|OpID:3|FromA:{Invalid|Node:0|Process:0|Type:0}|ToA:{Invalid|Node:-1|Process:-1|Type:-1}|MIDFrom:0|Type:4|Pri2|Id:23497]
    2012-07-03 07:53:17.221: [    AGFW][1347250496] Agfw Proxy Server replying to the message: RESOURCE_STATUS[Proxy] ID 20481:25353
    2012-07-03 07:53:17.221: [   CRSPE][1357756736] State change received from node001 for ora.diskmon 1 1
    2012-07-03 07:53:17.221: [   CRSPE][1357756736] Processing PE command id=140. Description: [Resource State Change (ora.diskmon 1 1) : 0x2aaab00318a0]
    2012-07-03 07:53:17.221: [   CRSPE][1357756736] RI [ora.diskmon 1 1] new external state [OFFLINE] old value: [ONLINE] on node001 label = []
    2012-07-03 07:53:17.221: [   CRSPE][1357756736] RI [ora.diskmon 1 1] new target state: [OFFLINE] old value: [ONLINE]
    2012-07-03 07:53:17.222: [  CRSOCR][1351452992] Multi Write Batch processing...
    2012-07-03 07:53:17.222: [   CRSPE][1357756736] Resource Resource Instance ID[ora.diskmon 1 1]. Values:
    STATE=OFFLINE
    TARGET=OFFLINE
    LAST_SERVER=node001
    CURRENT_RCOUNT=0
    LAST_RESTART=1341294297
    FAILURE_COUNT=0
    FAILURE_HISTORY=
    STATE_DETAILS=
    INCARNATION=2
    STATE_CHANGE_VERS=5
    LAST_FAULT=1341242723
    DEGREE_ID=1
    ID=ora.diskmon 1 1
    CARDINALITY_ID=1
    Lock Info:
    Write Locks:START of [ora.cssd 1 1] on [node001] : 0x2aaab000ba10
    ReadLocks:|STATE INITED| has failed!
    2012-07-03 07:53:17.222: [   CRSPE][1357756736] Processing unplanned state change for [ora.diskmon 1 1]
    2012-07-03 07:53:17.222: [   CRSPE][1357756736] Target is not ONLINE, not recovering [ora.diskmon 1 1]
    2012-07-03 07:53:17.222: [   CRSPE][1357756736] PE Command [ Resource State Change (ora.diskmon 1 1) : 0x2aaab00318a0 ] has completed
    2012-07-03 07:53:17.222: [    AGFW][1347250496] Agfw Proxy Server received the message: CMD_COMPLETED[Proxy] ID 20482:23501
    2012-07-03 07:53:17.222: [    AGFW][1347250496] Agfw Proxy Server replying to the message: CMD_COMPLETED[Proxy] ID 20482:23501
    2012-07-03 07:53:17.223: [    AGFW][1347250496] Agfw received reply from PE for resource state change for ora.diskmon 1 1
    2012-07-03 07:53:17.223: [  CRSOCR][1351452992] Multi Write Batch done.
    2012-07-03 07:54:56.523: [    AGFW][1347250496] Received the reply to the message: RESOURCE_START[ora.cssd 1 1] ID 4098:23242 from the agent /opt/grid/product/11gR2/grid/bin/cssdagent_root
    2012-07-03 07:54:56.523: [    AGFW][1347250496] Agfw Proxy Server sending the reply to PE for message:RESOURCE_START[ora.cssd 1 1] ID 4098:23220
    2012-07-03 07:54:56.524: [   CRSPE][1357756736] Received reply to action [Start] message ID: 23220
    2012-07-03 07:54:56.524: [    AGFW][1347250496] Received the reply to the message: RESOURCE_START[ora.cssd 1 1] ID 4098:23242 from the agent /opt/grid/product/11gR2/grid/bin/cssdagent_root
    2012-07-03 07:54:56.524: [   CRSPE][1357756736]Created alert : (:CRSPE00111:) :  Start action timed out!
    2012-07-03 07:54:56.524: [   CRSPE][1357756736] Start action failed with error code: 3
    2012-07-03 07:54:56.524: [    AGFW][1347250496] Agfw Proxy Server sending the last reply to PE for message:RESOURCE_START[ora.cssd 1 1] ID 4098:23220
    2012-07-03 07:54:56.524: [   CRSPE][1357756736] Received reply to action [Start] message ID: 23220
    2012-07-03 07:54:56.524: [    AGFW][1347250496] Agfw Proxy Server received the message: AGENT_SUICIDE[Proxy] ID 20486:34
    2012-07-03 07:54:56.524: [    AGFW][1347250496] Suicide request received from /opt/grid/product/11gR2/grid/bin/cssdagent_root
    2012-07-03 07:54:56.524: [    AGFW][1347250496] Agfw Proxy Server replying to the message: AGENT_SUICIDE[Proxy] ID 20486:34
    2012-07-03 07:54:56.524: [   CRSPE][1357756736] CRS-2674: Start of 'ora.cssd' on 'node001' failed
    2012-07-03 07:54:56.525: [UiServer][1361959232] Container [ Name: ORDER
         MESSAGE:
         TextMessage[CRS-2674: Start of 'ora.cssd' on 'node001' failed]
         MSGTYPE:
         TextMessage[1]
         OBJID:
         TextMessage[ora.cssd]
         WAIT:
         TextMessage[0]
    2012-07-03 07:54:56.525: [   CRSPE][1357756736] Sending message to agfw: id = 23555
    2012-07-03 07:54:56.525: [   CRSPE][1357756736] CRS-2679: Attempting to clean 'ora.cssd' on 'node001'
    2012-07-03 07:54:56.525: [    AGFW][1347250496] Agfw Proxy Server received the message: RESOURCE_CLEAN[ora.cssd 1 1] ID 4100:23555
    2012-07-03 07:54:56.525: [    AGFW][1347250496] Agent: /opt/grid/product/11gR2/grid/bin/cssdagent with user id root is being stopped. Will be restarted when agent stops completly
    2012-07-03 07:54:56.525: [    AGFW][1347250496] Could not forward message [RESOURCE_CLEAN[ora.cssd 1 1] ID 4100:23555] to agent. /opt/grid/product/11gR2/grid/bin/cssdagent_root is not running
    2012-07-03 07:54:56.525: [    AGFW][1347250496] Can not start Agent: /opt/grid/product/11gR2/grid/bin/cssdagent with user id root is waiting to be restarted.
    2012-07-03 07:54:56.525: [UiServer][1361959232] Container [ Name: ORDER
         MESSAGE:
         TextMessage[CRS-2679: Attempting to clean 'ora.cssd' on 'node001']
         MSGTYPE:
         TextMessage[3]
         OBJID:
         TextMessage[ora.cssd]
         WAIT:
         TextMessage[0]
    2012-07-03 07:55:01.627: [ CRSCOMM][1340946752][FFAIL] Couldnt clscreceive message, no message: 11
    2012-07-03 07:55:01.627: [ CRSCOMM][1340946752] Client disconnected.
    2012-07-03 07:55:01.627: [ CRSCOMM][1340946752][FFAIL] Listener got clsc error 11 for memNum. 14
    2012-07-03 07:55:01.628: [ CRSCOMM][1340946752] IPC listener connection to member 14 has been removed
    2012-07-03 07:55:01.628: [CLSFRAME][1340946752] Removing IPC Member:{Relative|Node:0|Process:14|Type:3}
    2012-07-03 07:55:01.628: [CLSFRAME][1340946752] Disconnected from AGENT process: {Relative|Node:0|Process:14|Type:3}
    2012-07-03 07:55:01.628: [   CRSPE][1357756736] Disconnected from server:
    2012-07-03 07:55:01.628: [    AGFW][1347250496] Agfw Proxy Server received process disconnected notification, count=1
    2012-07-03 07:55:01.628: [    AGFW][1347250496] /opt/grid/product/11gR2/grid/bin/cssdagent_root disconnected.
    2012-07-03 07:55:01.628: [    AGFW][1347250496] Restarting the agent /opt/grid/product/11gR2/grid/bin/cssdagent_root
    2012-07-03 07:55:01.628: [    AGFW][1347250496] Agent /opt/grid/product/11gR2/grid/bin/cssdagent_root[10188] stopped!
    2012-07-03 07:55:01.628: [ CRSCOMM][1347250496] removeConnection: Member 14 does not exist.
    2012-07-03 07:55:01.628: [    AGFW][1347250496] Starting the agent: /opt/grid/product/11gR2/grid/bin/cssdagent with user id: root and incarnation:7
    2012-07-03 07:55:01.632: [    AGFW][1347250496] Starting the HB [Interval =  30000, misscount = 10kill allowed=0] for agent: /opt/grid/product/11gR2/grid/bin/cssdagent_root
    2012-07-03 07:55:01.819: [CLSFRAME][1340946752] New IPC Member:{Relative|Node:0|Process:15|Type:3}:AGENT
    2012-07-03 07:55:01.819: [CLSFRAME][1340946752] New process connected to us ID:{Relative|Node:0|Process:15|Type:3} Info:AGENT
    2012-07-03 07:55:01.837: [    AGFW][1347250496] Agfw Proxy Server received the message: AGENT_HANDSHAKE[Proxy] ID 20484:14
    2012-07-03 07:55:01.837: [    AGFW][1347250496] Agent /opt/grid/product/11gR2/grid/bin/cssdagent_root with pid:10530 connected to server.
    2012-07-03 07:55:01.837: [    AGFW][1347250496] Agfw Proxy Server sending message: RESTYPE_ADD[ora.cssd.type] ID 8196:23591 to the agent /opt/grid/product/11gR2/grid/bin/cssdagent_root
    2012-07-03 07:55:01.838: [    AGFW][1347250496] Agfw Proxy Server sending message: RESOURCE_ADD[ora.cssd 1 1] ID 4356:23593 to the agent /opt/grid/product/11gR2/grid/bin/cssdagent_root
    2012-07-03 07:55:01.838: [    AGFW][1347250496] Agfw Proxy Server forwarding the message: RESOURCE_CLEAN[ora.cssd 1 1] ID 4100:23555 to the agent /opt/grid/product/11gR2/grid/bin/cssdagent_root
    2012-07-03 07:55:01.839: [    AGFW][1347250496] Agfw Proxy Server replying to the message: AGENT_HANDSHAKE[Proxy] ID 20484:14
    2012-07-03 07:55:01.851: [    AGFW][1347250496] Received the reply to the message: RESTYPE_ADD[ora.cssd.type] ID 8196:23591 from the agent /opt/grid/product/11gR2/grid/bin/cssdagent_root
    2012-07-03 07:55:01.854: [    AGFW][1347250496] Received the reply to the message: RESOURCE_ADD[ora.cssd 1 1] ID 4356:23593 from the agent /opt/grid/product/11gR2/grid/bin/cssdagent_root
    2012-07-03 07:55:01.861: [    AGFW][1347250496] Received the reply to the message: RESOURCE_CLEAN[ora.cssd 1 1] ID 4100:23594 from the agent /opt/grid/product/11gR2/grid/bin/cssdagent_root
    2012-07-03 07:55:01.862: [    AGFW][1347250496] Agfw Proxy Server sending the reply to PE for message:RESOURCE_CLEAN[ora.cssd 1 1] ID 4100:23555
    2012-07-03 07:55:01.862: [    AGFW][1347250496] Received the reply to the message: RESOURCE_CLEAN[ora.cssd 1 1] ID 4100:23594 from the agent /opt/grid/product/11gR2/grid/bin/cssdagent_root
    2012-07-03 07:55:01.862: [   CRSPE][1357756736] Received reply to action [Clean] message ID: 23555
    2012-07-03 07:55:01.862: [    AGFW][1347250496] Agfw Proxy Server sending the last reply to PE for message:RESOURCE_CLEAN[ora.cssd 1 1] ID 4100:23555
    2012-07-03 07:55:01.863: [    AGFW][1347250496] Agfw Proxy Server received the message: AGENT_SUICIDE[Proxy] ID 20486:34
    2012-07-03 07:55:01.863: [   CRSPE][1357756736] Received reply to action [Clean] message ID: 23555
    2012-07-03 07:55:01.863: [    AGFW][1347250496] Suicide request received from /opt/grid/product/11gR2/grid/bin/cssdagent_root
    2012-07-03 07:55:01.863: [    AGFW][1347250496] Agfw Proxy Server replying to the message: AGENT_SUICIDE[Proxy] ID 20486:34
    2012-07-03 07:55:01.863: [   CRSPE][1357756736] CRS-2681: Clean of 'ora.cssd' on 'node001' succeeded
    2012-07-03 07:55:01.863: [   CRSPE][1357756736] Sequencer for [ora.cssd 1 1] has completed with error: CRS-0215: Could not start resource 'ora.cssd'.
    2012-07-03 07:55:01.863: [UiServer][1361959232] Container [ Name: ORDER
         MESSAGE:
         TextMessage[CRS-2681: Clean of 'ora.cssd' on 'node001' succeeded]
         MSGTYPE:
         TextMessage[3]
         OBJID:
         TextMessage[ora.cssd]
         WAIT:
         TextMessage[0]
    2012-07-03 07:55:01.864: [   CRSPE][1357756736] PE Command [ Start Resource : 0x2aaab0009d00 ] has completed
    2012-07-03 07:55:01.864: [    AGFW][1347250496] Agfw Proxy Server received the message: CMD_COMPLETED[Proxy] ID 20482:23606
    2012-07-03 07:55:01.864: [   CRSPE][1357756736] UI Command [Start Resource : 0x2aaab0009d00] is replying to sender.
    2012-07-03 07:55:01.864: [    AGFW][1347250496] Agfw Proxy Server replying to the message: CMD_COMPLETED[Proxy] ID 20482:23606
    2012-07-03 07:55:01.864: [UiServer][1361959232] Container [ Name: UI_DATA
         ora.cssd:
         TextMessage[215]
    2012-07-03 07:55:01.864: [UiServer][1361959232] Done for ctx=0x2aaab004ece0
    2012-07-03 07:55:01.869: [UiServer][1364060480] Closed: remote end failed/disc.
    2012-07-03 07:55:03.791: [ CRSCOMM][1340946752][FFAIL] Couldnt clscreceive message, no message: 11
    2012-07-03 07:55:03.791: [ CRSCOMM][1340946752] Client disconnected.
    2012-07-03 07:55:03.791: [ CRSCOMM][1340946752][FFAIL] Listener got clsc error 11 for memNum. 15
    2012-07-03 07:55:03.791: [ CRSCOMM][1340946752] IPC listener connection to member 15 has been removed
    2012-07-03 07:55:03.791: [CLSFRAME][1340946752] Removing IPC Member:{Relative|Node:0|Process:15|Type:3}
    2012-07-03 07:55:03.791: [CLSFRAME][1340946752] Disconnected from AGENT process: {Relative|Node:0|Process:15|Type:3}
    2012-07-03 07:55:03.792: [   CRSPE][1357756736] Disconnected from server:
    2012-07-03 07:55:03.792: [    AGFW][1347250496] Agfw Proxy Server received process disconnected notification, count=1
    2012-07-03 07:55:03.792: [    AGFW][1347250496] /opt/grid/product/11gR2/grid/bin/cssdagent_root disconnected.
    2012-07-03 07:55:03.792: [    AGFW][1347250496] Agent /opt/grid/product/11gR2/grid/bin/cssdagent_root[10530] stopped!
    2012-07-03 07:55:03.792: [ CRSCOMM][1347250496] removeConnection: Member 15 does not exist.

  • Cluster node does not shutdown after "received shutdown"

    Hi,
    We put together an automated restart process that restarts cluster nodes across multiple servers. To shutdown a node, we use the Coherence MBeanConnector and invoke stop on object: name=Management,nodeId=<member id>. This works for most cases where member's log output shows "received shutdown", partition transfer messages and after the last primary partitions have been transferred the VM exits.
    For one node however, the VM did not exit. From looking at the log file for this particular node, the primary partitions were transferred, the distributedCache thread stops showing output, but the Cluster thread continues to show activity.
    Note that this node was the last VM to stop on the given server.
    Has anyone seen this before or ideas on why this particular node did not exit after receiving the shutdown message?
    Thanks!
    Marcel.

    Hi Marcel -
    Please take a thread dump (via "kill -3" or "ctrl-break") on the VM that does not stop correctly. Coherence does not shut the VM down; it simply shuts itself down. If a non-daemon thread is running on the VM, then it may not exit. However, we won't know that until we see the thread dump.
    Peace,
    Cameron Purdy | Oracle Coherence

  • Dead xserve cluster node

    One of our Xserve Cluster Nodes (DP G5 2.0 GHz) died over the holidays. Pressing the power button does nothing... no lights, fans, etc. However, the red light inside the case is on. Is this a power supply problem, or does the red light indicate it is something else? (I tried plugging into a different UPS)

    Update: It was not the power supply. Swapped supply with another machine and it seems to be something else. Any ideas?

  • Cluster resource does not start automatically

    Hello,
    I have a strange issue. last saterday i replaced the motherboards of three HP DL380G6 servers, there is an HW issue with the production date of this hardware.
    After change of the HW, the cluster resources does not start automatically, when booting the servers. The resources come in state 'offline'(except the master IP resource). When start manually, the cluster resources works fine. I checked the eDirectory , and changed also the startup parameter of the cluster (autostart-manually-autostart) but with no results.
    When i create a new (simple) CL-resource, i have the same issue with this resource. Only the master ip CL-resource starts automatically??
    Does anyone have an answer for this problem....
    Thanks in advanced
    3-node SLES9sp3 SLES/OES1 cluster (i know its old...)
    - iSCSI connection to an SLES11-SAN

    Originally Posted by changju
    The state is stored in eDir, so your problem is most likely caused by an eDir issue.
    Please check the attribute "NCS:CRM Failover Mode" of the resource object in eDir. If its value is an odd number, it means the resource will load automatically. If it's not, add 1 to the number and save the new value.
    Then, you need to check file "/var/opt/novell/ncs/resources.xml". Find the section for the resource, and check "nCSCRMFailoverMode" to make sure it matches what you have in eDir. If not, please run command "/opt/novell/ncs/bin/ncs-configd.py -init" to try to update it.
    If the problem persists after all the above, please contact NTS. We will have it resolved.
    Best regards,
    Changju

  • Satellite A100 does not "really" shut down

    Hey everybody!
    I have a Satellite A100 here and the problem is ... yeah, it does not really shut down. I can choose "Shut Down" in Windows and Windows shuts down, the monitor turns black and the notebook does not work anymore, but it does not turn off itself. The blue lights are still glowing. To switch off the system I have to push the on-off-switch for a few seconds.
    The problem occured three days ago. I don't think it's a virus (someone on the net assumed that), because the system has no connection to the internet and has'nt seen any usb-stick or whatever for at least half a year. The user told me he changed the energy-options from "Toshiba Power Saver" to "Desktop". Of course I changed it back, but this did'nt solve the problem. I also did'nt find anything helpful in the options. Anyone out there who knows the problem or knows what to do? :-)
    Greetins,
    coincidence

    Unfortunately, I can't. I choose "Shut down" in safe-mode and the operating system does a simple reboot. The notebook does not turn off at all.
    Thanks so far. :) Merry Christmas!

  • The selected context node does not have attributes - Message no. SWDP_WB_TO

    Hello,
    I am trying out the example in web dynpro documentation -> Creating a Simple Flight Info Application
    and in part 3 steps 11 - 13 I get the following error
    The selected context node does not have attributes
    and the associated message class and # is :
    Message no. SWDP_WB_TOOL467
    can anyone please help ?

    Hi Raj,
    Have you done the steps 7 and 8 as described
    7.      Create an additional node called u201CflightSu201D, this time with the cardinality 0..n.
    8.      Use the Create Using Wizard option of the context node again to define attributes from the SFLIGHT structure for this new node (see part 1, step 15). Choose the following fields: CARRID, CONNID, FLDATE, PRICE and PLANETYPE.
    See the flights node , if there are no attributes the perform the steps as described in 8.

  • My iphone does not automatically switch off the display light when locked. How do I fix this?

    I have an iPhone 5 with iOS 8.2 software.
    My iPhone does not automatically switch off the display light when it is locked. Therefore, if I get an e-mail/text message/pop-up from other application, the light just stays on, which obviously drains my battery.
    The problem just started yesterday, and it has been a couple of days since I updated the software, so I wouldn't think the software update is the problem.
    I have tried restarting the phone (using home and lock button), but that did not work.
    Something else that seems weird is that once in a while, a blue beam rolls over the screen from one side to the other. I don't know why it does this, and have no idea whether this is related to the display light issue.
    I hope someone is able to help by telling me what to do in order to get my phone to act normal again.
    Thank you x

    Restart your device by holding the home and power button until the Apple logo appears. You will not lose any data.

  • Error:The node does not contain any elements

    Hi Experts,
    I am getting this error.
      The following error text was processed in the system SR6 :  The node does not contain any elements. COMPONENTCONTROLLER.1.ROADMAP
    The error occurred on the application server server6_SR6_00 and in the work process 0 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
          Method: RAISEELEMENT_NOT_FOUND of program CL_WDR_CONTEXT_NODE===========CP
          Method: IF_WD_CONTEXT_NODE~SET_STATIC_ATTRIBUTES of program CL_WDR_CONTEXT_NODE_VAL=======CP
          Method: WDDOINIT of program /1BCWDY/G25NECI0LTPP66VI3KOI==CP
          Method: IF_WDR_COMPONENT_DELEGATE~WD_DO_INIT of program /1BCWDY/G25NECI0LTPP66VI3KOI==CP
          Method: DO_INIT of program CL_WDR_DELEGATING_COMPONENT===CP
          Method: INIT_CONTROLLER of program CL_WDR_CONTROLLER=============CP
          Method: INIT_CONTROLLER of program CL_WDR_COMPONENT==============CP
          Method: INIT of program CL_WDR_CONTROLLER=============CP
          Method: INIT of program CL_WDR_CLIENT_COMPONENT=======CP
          Method: INIT of program CL_WDR_CLIENT_APPLICATION=====CP
    What is the problem here?
    Thank you.
    Lalitha.

    (Assuming you have created elements for node...)
    Definitely it is cardinality problem, please check that... Try to understand below points to avoid such error.
    When a node is created in the context of a Web Dynpro component, the cardinality of the node is specified. The cardinality defines how often a node is to be instantiated at runtime u2013 that is, how many elements of this node are available at runtime.
    u2022        1u20261          Only one element is instantiated.
    u2022        0u20261          At runtime, no more than one element is instantiated, but it is also possible that no element is instantiated.
    u2022        1u2026n          n elements can be instantiated, but at least one element must be instantiated.
    u2022        0u2026n          The number of instantiated elements of the context node can vary.
    The cardinalities 0..n and 1..n correspond to the declaration of an internal table. The cardinality 1..1 corresponds to the declaration of a structure.
    Thanks,
    Swanand.

  • Context node does not contain any elements

    Hi Masters,
                     I create a node dynamically from structure using CL_WD_DEMO_DYN_MODEL->create_nodeinfo_from_struct method. my code as
    nd_field_info = nd_field->get_node_info( ).
    wd_this->zwd_assist->create_nodeinfo_from_struct( EXPORTING
      parent_info = nd_field_info
      structure_name = dotablename
      is_multiple = abap_true ).
    When am set the data to context then it gives the error like node does not contain any elements, but i verified the attributes using nodeinfo then all attributes will be displayed, but when value inserting time it throws error.
    Waiting for Your Response...
    Advance Thankyou
    Regards,
    Sathya

    Hi sathya ,
    the method you using is absolute , the replacement for the methos is  if_wd_context_node_info->add_new_child_node
    pls refer the sample code to create a dynamic Node .
    DATA: pa0001  TYPE REF TO cl_abap_structdescr,
               comp_tab     TYPE cl_abap_structdescr=>component_table,
               struct_type     TYPE REF TO cl_abap_structdescr,
              ls_pa0001   ?= cl_abap_typedescr=>describe_by_name('P0001').
              comp_tab      = p0001->get_components( ).
              struct_type   = cl_abap_structdescr=>create( comp_tab ).
      struct_type = cl_abap_structdescr=>create( comp_tab ).
    * now the nodeinfo is created
      node_info = wd_context->get_node_info( ).
      node_info = node_info->add_new_child_node(
        name                         = 'MY_NODE'
        IS_MANDATORY                 = ABAP_true
        IS_MULTIPLE                  = ABAP_true
        STATIC_ELEMENT_RTTI          = struct_type
        IS_STATIC                    = ABAP_false
    refer DEMODYNAMIC component for dynamic creation of node
    regards
    Chinnaiya P
    Edited by: chinnaiya pandiyan on Dec 15, 2010 2:07 PM

  • Our XServe-RAID volume does not mount anymore...

    Our XServe-RAID volume does not mount anymore.
    On /var/log/system.log I could find the following.
    Feb 22 09:52:29 ogre kernel: jnl: open: journal magic is bad (0xf433f != 0x4a4e4c78)
    Feb 22 09:52:29 ogre kernel: hfs: early jnl init: failed to open/create the journal (retval 0).
    It appears the the journaling is badly screwed.
    I tryed to disable the journaling with no success.
    Here is what I get.
    ogre:/var/log root# diskutil disablejournal disk2s3
    The selected journaling request does not appear to be valid
    After some googling I foud this :
    --- QUOTE ---
    The more serious problem occurs when the contents of the journal file are corrupted in such a way that the operating system does not proceed to mount the volume. Fortunately, this problem is extremely rare (I have seen three reports of corrupted journal files at the MacFixIt Forums and Apple Discussion Forums since journaling was introduced).
    Starting the journaling process is one of the first things that happens when a volume is recognized by the operating system. There appears to be no way to intervene in single-user mode before the journal file is examined. A message about �bad journal magic� appears. Unfortunately, every tool that can turn off journaling requires that the volume already be mounted.
    If the Macintosh can boot under Mac OS 9, dealing with a corrupted journal file involves restarting under Mac OS 9 and using a utility (such as our free TechTool Lite 3.0.4) to make visible these two invisible files at the root level of the volume:
    /.journal
    /.journalinfoblock
    Once these files are made visible, they can be deleted. Mac OS 9 does not support journaling, and recognizes nothing special about these files. Neither of these files can be seen in Terminal or in single-user mode in Mac OS X, because they are considered part of the disk directory.
    If the Macintosh cannot boot under Mac OS 9, but the drive has Mac OS 9 drivers installed, the drive can be put into a Macintosh that can boot under Mac OS 9, or an ATA/IDE drive can be put into a suitable FireWire enclosure.
    The possibility that you may need to remove these two journaling files under Mac OS 9 is a good reason for making sure that all volumes you use have Mac OS 9 drivers installed. The drivers must be installed when the drive is formatted.
    --- [END] QUOTE ---
    Well, my disk is part of a RAID 5 matrix.... so the solution proposed does not work.
    Does any one of you has any idea ?
    XServe   Mac OS X (10.3.9)  

    I've seen an article about volumes not mounting and was wondering if this relates to your problem;
    http://discussions.apple.com/thread.jspa?messageID=1239224&#1239224
    The thread doesn't refer to journalling but may be of use?
    HTH

  • When I touch buttons voice names them but does not really respond.  What should I do to restore normal work?

    When I touch buttons voice names them but does not really respond.  What should I do to restore normal work? Thank you

    I have the same problem, its an ipod touch, the most recent version, for my granma. she is blind. it wouldn't respond when you pick something, double tapping or even identifying it when either of use it.
    i can see that i am tapping the buttons in VO mode and it doesn't respond. It also says to scroll with three fingers and that takes 20 tries to get to work. I bought this for my grandmother to use VO and it doesn't work. Its a load of crap. I thought if I updated that might help, it doesn't need to be updated.
    And the voice speed is almost at the lowest and it still talks fast.
    It is ridiculous to have a feature like this and it not be useable. Disgruntled and disgusted by Apple's disregard for the people who could most benefit from this type of technology. I've looked on websites for the blind. So far, no help or advice.

  • Applications installed in my iTouch does not launch. the music and internet functions but the installed applications does not. tried switching it on and off, still problem persists

    Applications installed in my iTouch does not launch. the music and internet functions but the installed applications does not. tried switching it on and off, still problem persists. help...

    Your only chance besides getting it serviced would be setting it up as new device:
    http://support.apple.com/kb/HT4137

  • Node does not join cluster upon reboot

    Hi Guys,
    I have two servers [Sun Fire X4170] clustered together using Solaris cluster 3.3 for Oracle Database. They are connected to a shared storage which is Dell Equallogic [iSCSI]. Lately, I have ran into a weird kind of a problem where as both nodes come up fine and join the cluster upon reboot; however, when I reboot one of nodes then any of them does not join cluster and shows following errors:
    This is happening on both the nodes [if I reboot only one node at a time]. But if I reboot both the nodes at the same time then they successfully join the cluster and everything runs fine.
    Below is the output from one node which I rebooted and it did not join the cluster and puked out following errors. The other node is running fine will all the services.
    In order to get out of this situation, I have to reboot both the nodes together.
    # dmesg output #
    Apr 23 17:37:03 srvhqon11 ixgbe: [ID 611667 kern.info] NOTICE: ixgbe2: link down
    Apr 23 17:37:12 srvhqon11 iscsi: [ID 933263 kern.notice] NOTICE: iscsi connection(5) unable to connect to target SENDTARGETS_DISCOVERY
    Apr 23 17:37:12 srvhqon11 iscsi: [ID 114404 kern.notice] NOTICE: iscsi discovery failure - SendTargets (010.010.017.104)
    Apr 23 17:37:13 srvhqon11 iscsi: [ID 240218 kern.notice] NOTICE: iscsi session(9) iqn.2001-05.com.equallogic:0-8a0906-96cf73708-ef30000005e50a1b-sblprdbk online
    Apr 23 17:37:13 srvhqon11 scsi: [ID 583861 kern.info] sd11 at scsi_vhci0: unit-address g6090a0887073cf961b0ae505000030ef: g6090a0887073cf961b0ae505000030ef
    Apr 23 17:37:13 srvhqon11 genunix: [ID 936769 kern.info] sd11 is /scsi_vhci/disk@g6090a0887073cf961b0ae505000030ef
    Apr 23 17:37:13 srvhqon11 scsi: [ID 243001 kern.info] /scsi_vhci (scsi_vhci0):
    Apr 23 17:37:13 srvhqon11 /scsi_vhci/disk@g6090a0887073cf961b0ae505000030ef (sd11): Command failed to complete (3) on path iscsi0/[email protected]:0-8a0906-96cf73708-ef30000005e50a1b-sblprdbk0001,0
    Apr 23 17:46:54 srvhqon11 svc.startd[11]: [ID 122153 daemon.warning] svc:/network/iscsi/initiator:default: Method or service exit timed out. Killing contract 41.
    Apr 23 17:46:54 srvhqon11 svc.startd[11]: [ID 636263 daemon.warning] svc:/network/iscsi/initiator:default: Method "/lib/svc/method/iscsid start" failed due to signal KILL.
    Apr 23 17:46:54 srvhqon11 svc.startd[11]: [ID 748625 daemon.error] network/iscsi/initiator:default failed repeatedly: transitioned to maintenance (see 'svcs -xv' for details)
    Apr 24 14:50:16 srvhqon11 svc.startd[11]: [ID 694882 daemon.notice] instance svc:/system/console-login:default exited with status 1
    root@srvhqon11 # svcs -xv
    svc:/system/cluster/loaddid:default (Oracle Solaris Cluster loaddid)
    State: offline since Tue Apr 23 17:46:54 2013
    Reason: Start method is running.
    See: http://sun.com/msg/SMF-8000-C4
    See: /var/svc/log/system-cluster-loaddid:default.log
    Impact: 49 dependent services are not running:
    svc:/system/cluster/bootcluster:default
    svc:/system/cluster/cl_execd:default
    svc:/system/cluster/zc_cmd_log_replay:default
    svc:/system/cluster/sc_zc_member:default
    svc:/system/cluster/sc_rtreg_server:default
    svc:/system/cluster/sc_ifconfig_server:default
    svc:/system/cluster/initdid:default
    svc:/system/cluster/globaldevices:default
    svc:/system/cluster/gdevsync:default
    svc:/milestone/multi-user:default
    svc:/system/boot-config:default
    svc:/system/cluster/cl-svc-enable:default
    svc:/milestone/multi-user-server:default
    svc:/application/autoreg:default
    svc:/system/basicreg:default
    svc:/system/zones:default
    svc:/system/cluster/sc_zones:default
    svc:/system/cluster/scprivipd:default
    svc:/system/cluster/cl-svc-cluster-milestone:default
    svc:/system/cluster/sc_svtag:default
    svc:/system/cluster/sckeysync:default
    svc:/system/cluster/rpc-fed:default
    svc:/system/cluster/rgm-starter:default
    svc:/application/management/common-agent-container-1:default
    svc:/system/cluster/scsymon-srv:default
    svc:/system/cluster/sc_syncsa_server:default
    svc:/system/cluster/scslmclean:default
    svc:/system/cluster/cznetd:default
    svc:/system/cluster/scdpm:default
    svc:/system/cluster/rpc-pmf:default
    svc:/system/cluster/pnm:default
    svc:/system/cluster/sc_pnm_proxy_server:default
    svc:/system/cluster/cl-event:default
    svc:/system/cluster/cl-eventlog:default
    svc:/system/cluster/cl-ccra:default
    svc:/system/cluster/ql_upgrade:default
    svc:/system/cluster/mountgfs:default
    svc:/system/cluster/clusterdata:default
    svc:/system/cluster/ql_rgm:default
    svc:/system/cluster/scqdm:default
    svc:/application/stosreg:default
    svc:/application/sthwreg:default
    svc:/application/graphical-login/cde-login:default
    svc:/application/cde-printinfo:default
    svc:/system/cluster/scvxinstall:default
    svc:/system/cluster/sc_failfast:default
    svc:/system/cluster/clexecd:default
    svc:/system/cluster/sc_pmmd:default
    svc:/system/cluster/clevent_listenerd:default
    svc:/application/print/server:default (LP print server)
    State: disabled since Tue Apr 23 17:36:44 2013
    Reason: Disabled by an administrator.
    See: http://sun.com/msg/SMF-8000-05
    See: man -M /usr/share/man -s 1M lpsched
    Impact: 2 dependent services are not running:
    svc:/application/print/rfc1179:default
    svc:/application/print/ipp-listener:default
    svc:/network/iscsi/initiator:default (?)
    State: maintenance since Tue Apr 23 17:46:54 2013
    Reason: Restarting too quickly.
    See: http://sun.com/msg/SMF-8000-L5
    See: /var/svc/log/network-iscsi-initiator:default.log
    Impact: This service is not running.
    ######## Cluster Status from working node ############
    root@srvhqon10 # cluster status
    === Cluster Nodes ===
    --- Node Status ---
    Node Name Status
    srvhqon10 Online
    srvhqon11 Offline
    === Cluster Transport Paths ===
    Endpoint1 Endpoint2 Status
    srvhqon10:igb3 srvhqon11:igb3 faulted
    srvhqon10:igb2 srvhqon11:igb2 faulted
    === Cluster Quorum ===
    --- Quorum Votes Summary from (latest node reconfiguration) ---
    Needed Present Possible
    2 2 3
    --- Quorum Votes by Node (current status) ---
    Node Name Present Possible Status
    srvhqon10 1 1 Online
    srvhqon11 0 1 Offline
    --- Quorum Votes by Device (current status) ---
    Device Name Present Possible Status
    d2 1 1 Online
    === Cluster Device Groups ===
    --- Device Group Status ---
    Device Group Name Primary Secondary Status
    --- Spare, Inactive, and In Transition Nodes ---
    Device Group Name Spare Nodes Inactive Nodes In Transistion Nodes
    --- Multi-owner Device Group Status ---
    Device Group Name Node Name Status
    === Cluster Resource Groups ===
    Group Name Node Name Suspended State
    ora-rg srvhqon10 No Online
    srvhqon11 No Offline
    nfs-rg srvhqon10 No Online
    srvhqon11 No Offline
    backup-rg srvhqon10 No Online
    srvhqon11 No Offline
    === Cluster Resources ===
    Resource Name Node Name State Status Message
    ora-listener srvhqon10 Online Online
    srvhqon11 Offline Offline
    ora-server srvhqon10 Online Online
    srvhqon11 Offline Offline
    ora-stor srvhqon10 Online Online
    srvhqon11 Offline Offline
    ora-lh srvhqon10 Online Online - LogicalHostname online.
    srvhqon11 Offline Offline
    nfs-rs srvhqon10 Online Online - Service is online.
    srvhqon11 Offline Offline
    nfs-stor-rs srvhqon10 Online Online
    srvhqon11 Offline Offline
    nfs-lh-rs srvhqon10 Online Online - LogicalHostname online.
    srvhqon11 Offline Offline
    backup-stor srvhqon10 Online Online
    srvhqon11 Offline Offline
    cluster: (C383355) No response from daemon on node "srvhqon11".
    === Cluster DID Devices ===
    Device Instance Node Status
    /dev/did/rdsk/d1 srvhqon10 Ok
    /dev/did/rdsk/d2 srvhqon10 Ok
    srvhqon11 Unknown
    /dev/did/rdsk/d3 srvhqon10 Ok
    srvhqon11 Unknown
    /dev/did/rdsk/d4 srvhqon10 Ok
    /dev/did/rdsk/d5 srvhqon10 Fail
    srvhqon11 Unknown
    /dev/did/rdsk/d6 srvhqon11 Unknown
    /dev/did/rdsk/d7 srvhqon11 Unknown
    /dev/did/rdsk/d8 srvhqon10 Ok
    srvhqon11 Unknown
    /dev/did/rdsk/d9 srvhqon10 Ok
    srvhqon11 Unknown
    === Zone Clusters ===
    --- Zone Cluster Status ---
    Name Node Name Zone HostName Status Zone Status
    Regards.

    check if your global devices are mounted properly
    #cat /etc/mnttab | grep -i global
    check if proper entries are there on both systems
    #cat /etc/vfstab | grep -i global
    give output for quoram devices .
    #scstat -q
    or
    #clquorum list -v
    also check why your scsi initiator service is going offline unexpectedly
    #vi /var/svc/log/network-iscsi-initiator:default.log

  • Calendar Server 4: Adding a user to a node does not add ou attribute

    In Netscape Calendar Server (CS) 3.5, if I add a new user with an organizational
    unit (ou)
    attribute to a Calendar Server node, the server will create an
    ou so that the Calendar client
    will be able to use the ou
    parameter to search for this user.
    <P>
    However, in CS 4.0, if I add a new user to an ou
    and then add that user to a Calendar
    node, the server does not automatically create a separate ou
    attribute.
    <P>
    Will I need to manually add the separate ou
    attribute to the ldif
    <P>
    No. The CS 4.0 server, unlike the CS 3.5 server, supports mapping from
    Calendar Server attributes to LDAP attributes. You can find more information
    on this mapping property in the Administrator's Guide for Netscape Calendar
    Server 4.0 at the following URL:<BR>
    <P>
    http://docs.iplanet.com/docs/manuals/calendar/ncs40/ag/appendie.htm#1025959.
    <BR>
    <P>
    To enable this mapping, in the [LDAP]
    section of the
    /users/unison/misc/unison.ini file,
    add the following entry:<BR>
    <P>
    attr_orgunit1 = "ou"

    Is there a way to enter multiple groups? Guess I'll have to learn how to do multi input in a real custom form.The "MultiSelect" HTML Component works for me and I cant think of any other suitable component. Multiselectable List maybe. Fill the allowedValues property with a hardcoded list (*BAD*) or directly from a search on LDAP (_GOOD_) using IDM getResourceObjects FormUtil. You should find plenty of examples how to use it in the forum.
    One issue I noticed, I've verified the user was added to the group using an external ldap tool (JXplorer), however now that group has disappeared from the LDAP resource browser list view.(I personally prefer the good old [lbe LDAP Browser\Editor|http://www-unix.mcs.anl.gov/~gawor/ldap/] or ldapadmin)
    That shouldn't happen... Verify the group is still there, the objectclass isnt changed by IDM (really shouldnt happen...) and make double sure nobody else screwed around with it. Groups of objectclass groupOfNames and groupOfUniqueNames (and posixGroup but that's a different schema mapping) are supported by default afaik.

Maybe you are looking for

  • I have just installed Firefox 6, and Rapport no longer works - the same problem that you had with Firefox 5. What is happening?

    You prompted me to install Firefox 6 this evening, as it addresses serious security/stability problems, but when I did this, the Rapport icon vanished from the address bar. Reinstalling the current version of Rapport has not fixed this. The same thin

  • Watching Apple TV on an iMac

    I am willing to buy an Apple TV device in order to download HD rentals from iTunes, but I don't own a TV set--I watch television through eyeTV on my iMac. So here's my question: Is it possible to use Apple TV on an iMac only? I'm using an updated 24"

  • Select variable in where condition

    Hi Experts,                A field is stored in SAP, we want to add the same in where condition while selecting data thru IC. please guide.

  • To alter content of the file

    Hi I can not get file.txt that this contained in the jar to alter. it is a file of properties in format text, I get to read the information inside of the file using the package java.util.zip.*! but I don't get to alter that file and to save inside of

  • How to edit html in Muse?

    Hi, I have an image link that is not functioning correctly on my portfolio site. On the home page I have an image that is supposed to link to the projects page, but using the add hyperlink function is creating the following inoperable link: work:Proj