Xserve Raid and Windows Machines

Hi All,
I need some help, first and foremost I am not familiar with Xserve Raid units. We have one in a remote office that is connected to all our macs via Fiber. I need to connect a windows box with a fiber card to this SAN also to backup the SAN. How do I go about mounting the volume within windows and what software do I need to connect?
Thanks,
Greg

Are the computers using the RAID as directly attached storage or are they using XSAN (or another product) to access the storage as a SAN?
If they are using XSAN then I'm afraid you're out of luck as we there is no Windows client for XSAN. If they are using a different SAN product then perhaps you'll have more luck with finding a windows client.
HTH,
=Tod

Similar Messages

  • Xserve RAID and windows

    How do I configure a Windows PC to access Xserve RAID drives?

    Kind of a vague question...
    Are you trying to attach the Windows PC directly to the XServe RAID?
    Or is the XServe RAID attached to a Mac and you're trying to access the data over a network?
    In the first case you should just need a fiber channel card in the Windows PC and run a fiber channel cable from the PC to the RAID - depending on how the RAID is configured, it should just appear.
    In the second case you need to share the XServe RAID volumes via SMB. The specifics of how to do this vary based on which version of Mac OS X Server you're running.

  • XServe RAID and Virtual Machines

    We are a software developer doing most of our work with MS technologies. We are considering using an Xserve RAID in our Windows environment to store Virtual Machines. Does anybody out there fit our profile? We'd love to hear your experiences.

    Are the computers using the RAID as directly attached storage or are they using XSAN (or another product) to access the storage as a SAN?
    If they are using XSAN then I'm afraid you're out of luck as we there is no Windows client for XSAN. If they are using a different SAN product then perhaps you'll have more luck with finding a windows client.
    HTH,
    =Tod

  • Firefox no longer connects to internet on my mac, and windows machines, after v18. I've tried several solutions from Mozilla support and nothing works. Firefox

    Firefox no longer connects to internet on my mac, and windows machines, after v18. I've tried several solutions from Mozilla support and nothing works. Firefox can't even connect to Mozilla for updates. Firefox just sits on the default search page and attempts to connect to websites by typing URLs, or by clicking on the links on the default search page don't work.

    You could try the following:
    * Make sure your Internet security software is up-to-date (i.e. you are running the latest version)
    * Remove Firefox from your program's list of trusted or recognized programs, then add it back. For detailed instructions, see Configure firewalls so that Firefox can access the Internet.
    Let us know if this fixed your problem!

  • I have an email account causes the machine to hang up after being in use for a day.  It only occurs on my Macbook Pro and only one particular account.  The problem account works fine on my iMac and Windows Machines.  Any ideas what is causing this?

    I have an email account causes the machine to hang up after being in use for a day.  It only occurs on my Macbook Pro and only one particular account.  The problem account works fine on my iMac and Windows Machines.  I have been to the local Genius bar and through trial and error we have determined that Mail is working ok but somehow the account is causing the problem.  I have used this account for years.  Any ideas what is causing this?

    No idea why, but one thing you may try if you have the time, is create a new user, and set up the problem mail account in the new user space. See if it causes your MBP to hang as well.  That will tell you if it is something wrong with your main User, or something wrong with MBP.
    Assuming this works, I'd nuke the problem account in your main user space, re-start, and reinititate the account and see if that helps.
    Depening on how many email accounts you have setup, it may be necessary to nuke the whole Mail folder in your User/Library....   Hard way to get it to work, but just my idea.

  • Messaging between Mac and Windows machines

    Hi everyone
    I am an experienced Windows developer but new to mac development and specially network programming.
    I have an idea in my mind for a program that needs to somehow make a communication possible between a Mac machine and a Windows machine.
    In particular I want to develop two applications:
    1- Application called "M": An app written in XCode that run on the Mac machine.
    2- Application called "W": An app written in let's say Visual Studio that run on Windows machine.
    All I want for this two applications is to talk to each other for example through messaging. For example consider this simple scenario:
    1- "M" running on Mac send a message to "W" running on Windows saying "PERFORM TASK A".
    2-  "W" performs the task
    3- ""W" send message to "W" saying "TASK A DONE"
    Both Mac machine and Windows machine are on the same network.
    Also please note that I am not concerned bout security of communication at this time.
    My problem is I don't know where to start from?
    Any suggestion for where to start from, technologies, sample codes, etc that help me get started is highly appreciated.
    Thanks,
    KylieM

    hi Ralph.. thanks for helping out with this... we got ichat on our side and the AIM on the pc side but it didn't quite work out yet. We were wondering if the pc being on a dial up is a problem? the sound quality was horrid coming from the pc to us but apparently pretty clear going from us... we also wondered if it was a microphone problem but ran out of time for testing.
    If it is the dial up being the issue does anyone know of any solutions or are we out of luck?

  • XServe Raid and QLogic Switch

    First off, I have no idea what any of this stuff does.
    Okay, now that that's out of the way...
    I have an XServe Raid divided into 4 partitions. Three computers connect to it via a QLogic San Switch 5200. Computer1 sees two partitions. Computer2 sees one partition and computer3 sees one partition.
    Computer1 still sees both of it's partitions but Computers 2 & 3 cannot see their partitions.
    Now, I think the problem is with the switch. The XServe seems to be fine from everything I can tell.
    I've tried troubleshooting the switch but can't even connect to it. All of this to just let you guys know what's going on.
    At this point I just want to get my video files off of the XServe partitions that can't be seen so... my question is this:
    If I remove the switch from the equation and just plug the XServe directly into the back of my G5 will all four partitions show up so I can get this data off?
    I just don't know enough about these things to know what would happen if I did that and want to make sure that nothing strange will happen!
    Any advice you guys can give would be SO much appreciated.
    Kip

    Camelot,
    This post totally helped me fix the problem. I had no idea what LUN masking was and when I saw that section in the RAID admin I didn't click it because not knowing what it was I didn't want to accidentally mess anything up. So yeah, I plugged the raid straight into the computer using the copper fibre channel cables and only saw two of the 4 partitions or I guess "slices." So, that made me think that your idea of the LUN masking option was probably right!
    I went to that area and yes, it was all set up with various ports seeing certain slices etc. I was able to go around to the two new computers and find their World Wide Port Names and assign those to specific slices. I'm so happy and I've learned all kinds of new stuff!
    Something I do think is odd...
    We replaced two computers that were connected to the XServe Raid and just took the fibre cable from the old and plugged it into the new. This of course is where the problem came in because the cards in the new computers have different WWPNs than the old. The funny thing is, it worked for a while. The drives showed up on the new computers... until we took a power hit and the XServe powered off and then came back up. So, it's like it doesn't look at the port name while it's on.. just when it first turns on. So it didn't seem to notice that the port names had changed until then.
    Seems kinda odd to me but.. hey, it all seems to work!
    So yeah, thank you so much. I've learned a lot here!
    Kip Gordon
    Memphis, TN

  • XServe RAID in Windows environment

    First of all, I am not a Mac person so please bear with me.
    I recently inherited a XServe RAID, a fiber channel card with two fiber channel cables and NO Mac computer. So everything I have is Windows based. I have a Dell Poweredge 2850 with Windows 2003 Server and Dell Windows XP workstations. Installed the fiber channel card on the server. I connected the ethernet of the XServe RAID on a netgear switch and connected the fiber channel straight to the fiber channel in the server. The server is connected on the same Netgear switch via ethernet. I was able to connect to the XServe RAID thru the fiber channels and ethernet connections.
    Utilizing the Raid Admin 1.5, I was able to set the network settings. Assigned the IP 192.168.2.155, 192.168.2.154, subnet 255.255.255.0 and named it Xserve1. No router or DNS were entered. With the servers Disk Management, I NTFS formatted 2.7TB on each array and assigned M and N drive letters. I then created folders and files on each array to see if they will take and it did.
    Now I'd like to share the Xserve RAID on the Windows network via ethernet only. Is that possible? I didn't want to use the Xserve RAID as a server share but as an independent machine instead. If so, how can I do it? Thanks...
    Bernard

    Hello, ulonggapo, and welcome to the Apple boards,
    Data is actually only accessible from the RAID over fibre channel and the ethernet exists only for RAID administration and control. To share the space on the RAID over ethernet you would need to connect it via fibre to a computer that would then reshare the storage to clients.
    The RAID is platform neutral and certainly can be used by Windows for data but only over fibre channel. If you're interested in pursuing it you should look at http://alienraid.org/ as a starting place for more non-Apple RAID information.
    HTH,
    =Tod

  • Clarification on how to use Xserve Raid and Fibre Channel without xsan.

    First let me apologize for not responding earlier to your response, I tend to get busy and then forget to check back here.
    Tod, the answer to your question is No, only one computer is accessing the xserve raid files at any one time and that is via Fibre Channel. However I do have the xserve raids set up as share points via ethernet.
    Maybe I should turn that off and only access the files with the one computer that can connect via fibre channel.
    I never thought of that. I will try that while I await for your answer, thanks again.
    Todd Buhmiller
    I have the following setup:
    Xserve: 2x2Ghz Dual Core Intel Xeon, 5Gb of Ram, Running 10.5.8 Leopard Server
    Xserve Raid with firmware version 1.5.1/1.51c on both controllers, and
    Qlogic Sanbox 5600
    Apple Fibre Channel Cards in Xserve, and Mac Pro Tower; Apple 2 Port 4Gbs Fibre Channel Card
    Mac Pro Tower-Quad Core Intel Xeon 2.8Ghz, 16Gb of Ram, Running Snow Leopard 10.6.4
    Here is the problem.
    The directory for the xserve raids keep getting corrup, and I use disc warrior to rebuild them. Is there a way to keep the directories from getting corrupt? I am a few pieces of equipment before I can build an Xsan as that is the ultimate goal, but until then, I just need to be able to have the raids funciton as storage without having to rebuild the directories all of the time.
    Anybody have any suggestions?
    Thanks
    Todd Buhmiller
    Widescreen Media
    Calgary, Alberta Canada
    Tod Kuykendall
    Posts: 1,237
    From: San Diego
    Registered: Oct 11, 2000
    Re: Xserve Raid Mounts, Corrupt Directory tired of rebuilding directory
    Posted: Jun 27, 2010 1:25 PM in response to: Todd Buhmiller
    Are multiple computers accessing the same data on the RAID at the same time?
    If so then NO. This is the source of your data corruption and I'm surprised if you were able to get all your data back every time if this is how you've been running your system. Each fibre channel assumes it has full and sole control of every volume it has mounted, no data arbitration is practiced and data corruption will occur if this assumption is wrong.
    The only way this set-up will work is to use partitions or LUN masks so the volumes are accessed by one computer at any time. As long as one computer relinquishes control before another mounts it you will dodge arbitration issues but this is a dangerous game. If you screw up and mount an already mounted volume - and there is no easy way to tell if a volume is mounted - corruption will then occur. Sharing data simultaneous at fibre speeds is what XSAN does and to do this you need it.
    HTH,
    =Tod
    Intel Xserve, G5 XServes, XRAID, Promise

    +The xserve raids will mount automatically to any computer that I connect the qlogic fc switch to+
    This is source of the corruption to your data. Any computer that attaches to a drive/partition via fibre channel assumes that it alone is in control of the drive and data corruption is inevitable.
    +Is that the issue, should I disconnect the xserve from the fc switch and leave it connected via ethernet?+
    Short answer: YES. The ethernet connections are fine because the server is controlling the file arbitration through the sharing protocol. Fibre channel connections assumes complete control over the partition and no arbitration of the file access is performed. It's like two people independently driving trying to drive the same car to different locations.
    Depending on your set-up it is possible for the two machines to see and use different parts of the Xserve RAID storage but they cannot access the same areas without SAN doing the arbitration.
    Hope that's clear,
    =Tod

  • Xserve, G5, Xserve RAID and fibre channel question

    hi guys,
    I have a Xserve conneted to Xserve RAID right now. Is it possible connect G5 to Xserve RAID thru fibre channel ? thanks

    >is it possible to do ?
    Not in the way you describe, no.
    The XServe RAID's 14 drives are connected to two separate controllers. Drives 1-7 are connected to the upper controller. Drives 8-14 are connected to the lower one.
    If your XServe is currently connected to the upper controller it's talking to drives 1-7.
    If you connect the G5 to the lower controller it will be talking to drives 8-14.
    Therefore you cannot use this setup to backup the data via the G5.
    At the very, very least you need a fiber channel switch so that both the XServe and the G5 can connect to the same controller. However, as Tod has already mentioned, it is tricky to get multiple machines talking to the same RAID drives while avoiding corruption (there's no concept of arbitration, or ways of preventing one machine from editing a file that's in use by the other machine).
    You have two basic options - one is to implement XSAN, which will handle the arbitration issue, the other is to configure the G5 to mount the RAID read-only. This should prevent the G5 from modifying a file while it's in use by the XServe (which may be sufficient for backup purposes), but you may still run into issues when the G5 tries to backup a file that's actively in use by the XServe.
    In all honesty, a better solution would either to get a SCSI card that works with the XServe and do it all there, or use file sharing between the XServe and the G5 and backup over the network - it'll be slower, but a lot more reliable.

  • Can't get WEP to work with both mac and windows machines.

    Currently my airport express is setup with no security. When I try to setup using WEP it works great for my powerbook but the windows machines constantly get disconnected.
    Any ideas? Should I use other types of wireless security (WPA etc...)? If so, can an xp machine be configured for that type?
    Any help would be greatly appreciated.
    PowerBook G4   Mac OS X (10.4.7)  

    If you can use WPA use WPA, it will depend on your PC
    wireless adapter and if you are running Windows XP
    SP2.
    --the window PC is running xp sp 2 but the adapter does not appear to support WPA (dell true mobile 1300 internal adapter)
    from your response below not clear what is the best path to take given WEP is the only option.
    One of the problems with WEP is that the actual
    standard relies on a 10 character HEX key for 40bit
    WEP and a 26 character HEX key for 128bit WEP.
    In order to make things easier for people, vendors
    use certain algorithms to convert simple
    alphanumeric passwords (or passphrases) into HEX
    keys, thus enabling people to use simple memorable
    WEP password rather than lengthy HEX keys.
    The problem is that different vendors use different
    algorithms to generate the HEX key and therefore a
    ASCII password on an AEBS will be hashed differently
    on a Netgear client and vice versa.
    One thing is a 13 character 128 bit WEP password
    will be hashed by all vendors in the same way (if
    you use 40bit WEP then a 5 character password is
    required).
    Though sometimes not even that works and the HEX key
    must be used regardless.
    AirPort: Joining an encrypted wireless network
    http://docs.info.apple.com/article.html?artnum=106424
    Choosing a password for networks that use Wired
    Equivalent Privacy (WEP)
    http://docs.info.apple.com/article.html?artnum=108058
    Accessing a Airport Network with a Windows XP PC or
    laptop (with XP SP2)
    http://www.ifelix.co.uk/tech/1011.html
    Accessing a Airport Network with a Windows XP PC or
    laptop (with XP SP1)
    http://www.ifelix.co.uk/tech/1010.html
    iFelix

  • Can i use my TC as a NAS for both my mac and windows machines at home ??

    im moving to my new place real soon and will have to set up my very own network.
    have set up the network before at my parents with no problems, as we were all using windows machines.
    with my new MBA, i am looking at 2 options:
    1) get an indepedant wireless router (eg. Linksys, belkin etc) and get another third party NAS (eg. Western Digital, Ioemega, etc)
    or
    2) get a 2TB time capsule and have my problem solved.
    For (2), my only concern is if I can access the TC from my windows macine? For sure I know my MBA can access the TC, as a network point and as a NAS, but can my windows machine access the TC's NAS feature and wirelessly import and export data?
    appreciate your feedback and advise.
    thanks!
    Edwin

    You don't need to re-format the drive. Just be sure to use the same network name on PCs and the TC. On Mac its detected automatically.
    *Sorry, my screen capture is in spanish but I think it can help you.

  • What is the max distance recommended between xServe RAID and the host?

    I'm looking to relocate my rack to quieter spot, but I would like to keep my xServe RAID in the rack.  How far away can I keep my xServe RAID from it's host system?  I have it hooked up to my MacPro right now.
    Thanks

    Hi
    I would say about as far as the FC Cables and your budget will go. According to Apple's Tech Brief on the subject that will be around 500 metres provided you use the relevant transceivers:
    http://images.apple.com/xserve/pdf/L322097A_FibrChnl_TB.pdf
    Page 4.
    HTH?
    Tony

  • OS X Snow Leopard Server and Windows Machines

    Hello! My wife's company is using Windows on a network. Is it possible to use a Mac server to control these? They will be eventually switching over, but are stuck with windows for the time being. We are hoping not to have to buy a windows server because they will be switching to Mac anyways. Am I making any sense?

    Not a ton But to answer what I believe is your question. OS X Server can run as a Primary Domain Controller. This is not the same as an Active Directory domain controller. However, for many environments running pre Windows 7, this means that OS X Server can act as the sole directory container and all workstations (Windows, Mac, many flavors of Linux) can be bound into the OS X Server for single directory management. By the way, the community appears to have found a way to join Win 7 systems as well.
    However, the easiest way of doing this may be to keep your Windows servers and move to Mac clients. Some of the questions that you need to be asking is will OS X Server be able to replace all the features currently in use on the Windows machine? How are you accounting for groupware, backup, disaster recovery, etc? Have you evaluated all of your software needs? Have you looking into physical security and data protection?
    The rage is to go Mac. But it is not a panacea. Mac systems require the same amount of thought and consideration in design that a Windows environment does. Do you generally have fewer issues with Macs... sure. But don't think that everything will just magically work because there is an Apple logo on it.

  • Expanding a XServe RAID and Striping

    Greetings!
    I have an XServe RAID with four 250 GB ADMs inside the 1-4 slots of the Upper or left controller. This one array totals 701.27 GB at RAID 5 showing up on my Desktop as one RAID.
    I recently acquired two ADMs, a 750 GB and 500 GB, and I'd like to install them in my vacant second controller on the right, slots 8-9. I'm pretty sure I can create another array with these two drives setting them at RAID 5. Then what I'd like to do is stripe the two arrays, using Disk Utility, and create a software RAID that will show up on my desktop as one RAID. (I currently use this RAID as my Final Cut Pro media drive.)
    My questions are: Am I on the right path?
    If I stripe them together, I will lose my data on my existing array, correct? (I have the data backed up on another external drive so when I'm done I can copy it back)
    I feel is best to have one RAID rather than several. Or should I consider having two RAIDs but being cognizant that I will have to stay on top of of my Final Cut Capture Scratch media folders as I edit? (ie, Two RAIDS = two separate Capture Scratch folders. So I'd have to choose what Final Cut media will be on what RAID, etc. rather than one folder where all the media can go)
    My goal down the road is to completely populate the left/top controller with 250 GB ADMs. If I do, I would assume I can expand the side with the 250's by merely using the Expansion function? Would this "upset" the prospect of having a single RAID of two striped arrays?
    Thanks in advance!
    System: PowerMac G5 (June 2004), Mac OS 10.4.11
    Xserve: Upper Controller, 4 ADMs, 250 each, 1 Array, 1 Slice, RAID 5, 701.27 GB Total

    William Lloyd wrote:
    This doesn't sound like a good idea. You're mixing stuff in a variety of configurations that don't match, and if you want to stripe the two sides, they should match for optimal performance.
    As in: they should all be 250 GB ADMs, right?
    With the 750 GB and 500 GB drives, your options are RAID 0 (with NO protection) giving ~ 1 TB of storage, or RAID 1 (mirror) giving ~450 GB of storage. The latter is probably preferable.
    So I could install them into the right side controller and make an array of the two using RAID 1 (mirror) and end up with 450 GB of storage. I'll get the protection but losing the extra storage because it would defer to the smaller size 500 GB ADM. And I can't add them to the other side where the 250 GB ADMs are because you're not supposed to mix different size ADMs on the same controller. (This is the stuff that is not in Apple's fine print when they sell it to you. You find it out either through Discussion threads or Technical Articles.)
    If you were to attempt to stripe this with the other side, you'd have either 1.4 TB or 900 GB of storage, respectively. In the former case, if one of the drives on the right side failed, you would lose 100% of your data on the entire volume.
    My option(s) would be: install the two non-compatible sized drives into the right side controller, combine them as a RAID 1 array and then have two separate RAIDs on my desktop, with the second RAID being physically larger than the other but actually smaller because of the incompatible 750 and 500 GB sizes. Then, when editing with Final Cut, I'd have to choose which RAID that I wanted to store my media on.
    So if I were you, I'd give up trying to make it look like one volume.
    Agreed. But are there any other options I can explore? I purchased the 750 and 500 GB drives naively thinking I could expand the storage of my Xserve RAID by buying larger drives. Now I'm finding out I should have purchased only 250 GB ADMs-- but they weren't available from Apple when I was able to purchase additional drives and no one told me otherwise. Until now.
    Thanks for your learned reply. I guess I should have consulted with you/Xserve RAID Discussions before buying anything.

Maybe you are looking for