XSLT Mapper file does not open in design view

XSLT mapper file in the composites exported from weblogic EM as a jar and imported in JDeveloper 11.1.14 does not open in design view. There is no option of design view itself in the tab structure. It is viewable only in source view.
Please suggest, how do I view the desgn view of the xslt mapper?
Thanks,
Promiit

When you export composites from Weblogic EM in jar format, the resulting files are differently formatted from what was used for deployment.
So, basically, the XSLT file, you are trying to open in Jdeveloper has lost the "mapSources" and "mapTargets" sections, which are generally present in the header section of the jdeveloper-generated XSLT file. Try to manually hand-crack those sections and you should be good to go.
Hope it helps !

Similar Messages

  • File will not open in Design View

    I needed to add new file types, which I have done before with CS4 and CS5, but it doesn't seem to be working with CS6. I've followed the instructions here: http://helpx.adobe.com/dreamweaver/kb/change-add-recognized-file-extensions.html
    but after restarting Dreamweaver CS6 the 'Design View' tab is still greyed out and I can only view in code view. What am I missing?

    David: the filename(s) are not listed in the 'Open in code view' panel.
    Okay, 6 hours later I decide to do what the instructions said NOT to do. Which is alter the exentions.txt file and the MMDocumentTypes.xml file directly IN the Dreamweaver CS6 folder. (original instructions said NOT to change them there because the program doesn't look there first. It looks in the User/Library/blah/blah folder.) Well, how about that, I change the files directly IN the Dreamweaver CS6 folder and now my files are available in 'Split' and 'Design' views. This should be helpful to others trying to add new extensions to their list.
    Please let someone know they should change your instructions on the Dreamweaver website.

  • When I click PDF file, the file does not open and  installation software for creative suite automatically begin to start. Even after re-installation of creative suite 5.5, only acrobat reader dose not work and the same phenomena occurs.

    When I click PDF file, the file does not open and  installation software for creative suite automatically begin to start. Even after re-installation of creative suite 5.5, only acrobat reader dose not work and the same phenomena occurs.

    Did you ever install Acrobat? It is not installed automatically with CS, but requires an extra installation step.

  • CS5: double-click on file does not open the file

    If Photoshop is closed, double-click on a file will always successfully launch Photoshop and open the picture.
    If Photoshop is running, double-clicking on a file will activate Photoshop, but very often the file does not open. It works from time to time though, and that seems to be on a random basis.
    Opening a file through the Open command will always work.
    I am working with 10.6.3 on a loaded Mac Pro.
    Did anybody experience this difficulty? Any help would be appreciated, before I take more drastic measures like reinstalling the software of worse than that. I've already done the usual maintenance operations.

    Marian Driscoll wrote:
    Caustic waltz, while brief, may have hit the nail on the head. If you do not want to continue this thread, you can search the forum for existing posts about Snow Leopard and file-program association confusion. Snow Leopard changed some things and that might be your issue.
    More simply, do your image files have extensions? (.PSD, .JPG, etc...)
    Hello Marian:
    While browsing through my Adobe account, I saw that you took the time to leave a comment two days ago. While it did not solve my problem, I will mark your comment as "helpful" for several reasons. It could have been a cause. And I will add politeness, courtesy and language precision. I'm an old guy and I quite value those elements.
    True, Snow Leopard changed changed the way files are associated to applications. Thank God! Here in our small office, we do a lot of cross-platform transfers and finally it works seamlessly. A good description of the new file identification system can be found here.
    Now, here are the reasons why Snow Leopard cannot be put at fault in my case:
    • If Photoshop CS5 is not launched, double-clicking on any psd, tiff or jpeg file will launch it and open properly.
    • If Photoshop CS5 is already running, double-clicking on any psd, tiff, or jpeg file will activate Photoshop CS5 but will not open.
    This points at either a bug or damaged Photoshop CS5, or maybe a damaged OS. Don't forget that out of maybe a hundred apps, this is the first time I meet with that problem. Of course, the easier course, but by no means guaranteed to work, is to presume that Photoshop CS5 is damaged or that its installation did not work properly. So I did the following things:
    • I deactivated Photoshop CS5 and uninstalled it.
    • I ditched all remaining files related to CS5, CS4, CS3, CS2, CS... yes I know, but then you know as well as I do0 that getting really rid of Photoshop is a daunting task. It took me almost two hours, but I am reasonably sure that the cleaning job was complete.
    • I reinstalled Photoshop CS5.
    Now everything works just fine at least for the time being. Time will tell, of course, but I think that the problem is solved.
    Regards

  • PhpBB2 source code does not show in design view /CS3

    I would like to customize a php bulletin board.
    The default bulletin board page does not show in design view.
    Is there a way to do it , such that php code can be written
    by DreamWeaver via the design view ?

    > The files I am trying to edit, or that is think I should
    be trying to edit ,
    > are
    > index.php , and in the includes file template.php
    If I am sorting this out correctly, which i am _not_ sure of
    at the moment:
    those aren't .tpl files.
    they are .php files, and are part of the forum. They aren't
    displaying in
    design view because they are all php.
    You need to find and edit the template files.
    In previous link given:
    http://www.phpbb.com/community/viewtopic.php?t=10764
    <q>
    So where do I find these great 'templates'?
    Look in /templates/subSilver (thoroughout the FAQ I will be
    using subSilver,
    the default template. If you are using a different template
    then change the
    folder you look in accordingly). You will see a collection of
    files there.
    The templates are the ones with the file extension '.tpl' The
    majority of
    files in that folder are .tpl files. </q>
    strongly suggest you make a backup copy of anything you try
    to touch.
    Alan
    Adobe Community Expert, dreamweaver
    http://www.adobe.com/communities/experts/

  • The jsp file does not open the new login window but opens the source code.....plz help

    When i try to log in to the log in link at the site https://efp.bpcl.in the log in page does not open but the firefox wants to ask with which program the firefox should open the file and when we give firefox or internet explorer than it opens the source code.Plz help...

    Those files are send as application/octet-stream and that makes Firefox display a download dialog.
    http://developer.mozilla.org/en/docs/Properly_Configuring_Server_MIME_Types

  • PDF files does not open in IE 8

    When I click on a link on a web page which is to open a pdf file in acrobat reader, it does not open and gives me a error mesage
    The instruction at "0x02d96433" referenced memory at "0x00000000". The memory could not be read
    and then it opens a blank new window.

    Hi,
     Maybe you can refer to the following link
    to try to solve your problem, thanks.
    http://helpx.adobe.com/acrobat/kb/cant-view-pdf-web.html
    | SQL PASS Taiwan Page |
    SQL PASS Taiwan Group
    |
    My Blog

  • Double clicking Illustrator (.ai) file does not open a file with opened app.

    Hello,
    I have an Illustrator CS5 (15.0.2) running on Windows 7 Pro. Here are the symptoms: when double clicking the Illustrator file once the application is already open, the file will not open. You will see an hourglass for a few seconds, but no file contents are displayed. However, if I were to close Illustrator application and then double click on the file, Illustrator will open the file correctly. Additionally, if I go to File -- Open and manually select the file, it also opens the file correctly. Only double clicking the file once the Illustrator application is already open does not work.
    Has anyone seen this issue and knows how-to fix it?

    Right click on a .ai file and choose properties, check to see what application is set to open .ai files. Try running in 32 bit mode.

  • In Dropbox, mobile index.html file does not open in Ipad with ios7

    Before upgrading to ios7 the index.html file opened to text.  Ios7 was to correct this, but the file will not open in a browser.

    I don't think this is a Flash Player problem, but possibly something wrong on your website.
    Try asking in the Dreamweaver forum.

  • What does E_ADEPT_XML_SYNTAX mean.. The downloaded acsm-file does not open in Adobe Digital Editions

    downloaded Adobe Digital Editions 4, and registered computer, verified email and then downloaded e-book from retailer, but the acmsfile does not want to open.
    This is very frustrating

    Since Re-activation as suggested by the link above is not working for you, Can you please confirm the following:
    The OperatorURL is reachable. ( you can find the operatorURL from the acsm file by opening it in notepad,etc)
    And Book is still available on the book-store for purchase.
    (If any of first two are not available, you might have to talk to distributor for next action item to get the book. Since you will have record of purchasing the book, (in my opinion) they should provide you the new token for downloading the book)
    And please confirm this that you used the same userID for downloading that you used when you first fulfilled/downloaded the book.
    (If it is the case, then you have to use the correct userID)
    I hope it helps.

  • Word file does not open automatically on export

    When I click on the Export to Word icon from the toolbar the file exports to C:\Program Files\SAP Business One\Worddocs\<company>\<bp ID>\<filename.doc> but it doesn not open automatically as it does in Excel.
    I can open the file once exported but I have to go into that path to do so. Is there something I can do to have it open automatically? MS Word does not even come up when the file is exported. I'm using MS Office 2007 and SAP Business One 8.8 PL 13.

    Hi Alan.......
    i guess what you need to do is Go to Administration> System Initialization> Print Preferences
    Select the Document say Invoice on Per Tab and tick on Export to MS-Word.
    Once you add the AR Invoice it will be exported to MS Word automatically.......
    Hope this will solve your problem.....
    Regards,
    Rahul

  • Iphoto file does not open in external editor

    I have selected Photoshop Elements as my external editor in iPhoto.  When I select a picture file and click 'edit',  Photoshop Elements working space opens but the picture does not appear.  (Same with Silkypix, the Lumix Raw editor).   This is a new bad habit that came with Mavericks.
    I can fit both working spaces on the screen and drag the photo into Photoshop Elements, but I should not have to do that.

    Which version of Photoshop Elements and iPhoto do you have?  The newest version, Adobe Photoshop Elements 12?
    Other than the previous versions of Elements, Adobe Photoshop Elements 12 installs the editor directly at the top-level of the Applications folder, so there are no longer any nested folders to select the editor application from.
    But there is a weird glitch, when I try to use it as an external editor in iPhoto.
    When I select a photo in iPhoto 9.5.1 and ctrl-click it and use the command "Edit in External Editor" from that panel, Adobe Photoshop Elements 12 opens with an empty window, like you reported.
    This does not work: Elements launches on an empty window:
    But when I use the "Edit" button in the footer of the iPhoto window and double click it, Adobe Photoshop Elements 12 will open with the photo in the Editor window.
    This does work:
    So, for the time being, use the Edit button to launch your external editor, if you are also using iPhoto 9.5.1 with Mavericks 10.9.4.

  • SQL file does not open in Mac with SQL Developer

    Hi,
    I have my .sql extension files in mac associated with SQL Developer, but when I open the file SQL Developer does not start; nothing happens.
    I checked all the associations and it seems correct.
    Any suggestion?
    Thanks,
    A.Tarquino
    Edited by: aftarquino on Oct 5, 2010 3:48 PM
    Anyone???

    Hi Mike,
    I can provide solution if you can tell me the registry value(HKEY_CLASSES_ROOT\sqlwb.sql.9.0\Shell\Open\Command). I believe there is an extra %1 which is causing this.
    Balmukund Lakhani | Please mark solved if I've answered your question, vote for it as helpful to help other user's find a solution quicker
    This posting is provided "AS IS" with no warranties, and confers no rights.
    My Blog: http://blogs.msdn.com/blakhani
    Team Blog: http://blogs.msdn.com/sqlserverfaq
    Let me see if I can get my IT guys to temporarily grant me registry access.  As I said above, it's locked down, but maybe if I ask
    reeeeally nicely :-)  I will keep you posted.  Thanks!
    EDIT: The IT gods have smiled on me.  The value for the key above is "C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\ssms.exe" /dde
    Not sure if that helps, but there you go.  Thanks! 
    Mike Loux
    Certified Practicing Geek
    mike dot loux at gmail dot com
    Replying to myself in case in-place edits don't trigger a "somebody updated this thread" email.  :-)
    Mike Loux
    Certified Practicing Geek
    mike dot loux at gmail dot com
    Hey Mike,
    Actually edit didnot trigger the email :)
    Change that to
    "C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\ssms.exe" %1 /dde
    (add %1 and that should fix this forever)
    Balmukund Lakhani | Please mark solved if I've answered your question, vote for it as helpful to help other user's find a solution quicker
    This posting is provided "AS IS" with no warranties, and confers no rights.
    My Blog: http://blogs.msdn.com/blakhani
    Team Blog: http://blogs.msdn.com/sqlserverfaq

  • Double-clicking on rpt file does not open report

    Post Author: lindad
    CA Forum: General
    When I double-click on a *.rpt file, Crystal Reports opens but does not bring up the report file.  I have to then go to File/Open in order to open the file.  I don't receive an error. Does anyone know how to get Crystal Reports to open the file at the same time as executing the crw32.exe?
    I checked in Windows Explorer under Tools/Folder Options/File Types, selected RPT which is associated to Crystal Reports, went to the Advanced options, and all I have is Open for an Action.  I have the following settings for Open:
    Application Used to Perform Action:  "C:\Program Files\Crystal Decisions\Crystal Reports 10\crw32.exe" "%1" /dde /e /n
    DDE Message:  &#91;FileOpen("%1")&#93;
    Application: crw32

    Post Author: lacsapper
    CA Forum: General
    I had to go into the Advanced settings and delete the "Open" action, then click "OK" to exit.  Then go back in and re-add the Open action, browse to your crw32.exe file as the application to open.  Seems to correct the problem; not sure of the cause.
    TTFN

  • .indd file does not open using InDesign 2014

    Hello All,
    I am getting the following message when attempting to open an   .indd file :-
    " Cannot open the file "abc.indd". Adobe InDesign may not support the file format,
    a plug-in that supports the file format may be missing, or the file may be open in another application. "
    I am using InDesign 2014 trial version. I have also used InDesign CC  (ver 9.22) to open the file but got the same message.
    How can I resolve this issue ?
    Thanks

    Usually this message is completely accurate -- either there's a lock file in the folder left over from a previous session that was not properly deleted (.idlk), or the file isn't actually a .indd (does it have an extension?), .indt, .inx or .idml file. We see this a lot when people rename PDF files thinking all they have to do is change the extension.
    If you open the file in a plain text editor, the first few lines should tell you if it's an InDesign file...

Maybe you are looking for