Yamaha o1x Issue with plug ins not showing on the DAW

Hi everyone, Been a while since I have used the Logic program, and I have updated the software as it was developed over the years. First I have already discovered that the Mlan will not connect in 64 bit mode and boot my macbook pro in 32 bit. I completed a mix a few weeks ago and need to eq certain areas and this job would be a breeze using my Yamaha O1x which is old but still works marvelously but the plug ins controls are not appearing on the DAW which is most frustrating. I am doing a number of experiments ( Which I would prefer not to ) to see if any plug ins work and plan two is to use an old 12" power pc and load an older version of logic and use the dongle to finish this up, failing that I guess I will have to do the finger dance with my track pad. Anyone have this issue? Anyone using a newer operating system and current logic pro using an O1x and having no issues? Thanks for reading. Cheers Chris

Not sure those plugins will work on recent versions of OSX and Logic, but if they could work it won't be on the initial version of OSX 10.7.5 which had a serious AU plugin problem... er.. BUG!
See if the supplemental update helps... (I would reboot after installing)
http://support.apple.com/kb/DL1599
If not, going back to the older PPC system may be the only choice.
I set up an O1X in a small studio many years ago, nice mixer, we used a digital patchbay and a master wordclock to sync up various digital devices.

Similar Messages

  • Plug-Ins Not Showing In Logic Pro 9

    Hey guys, I'm having some trouble with plug-ins in Logic Pro 9. Any of the third-party plug-ins I have installed (I've checked the location in the Components folder and they're all there, so I guess it's not something related to the plug-ins location) don't show up, even after rescaning the AU library, reopening Logic and all that stuff.
    Anybody has a clue about what could cause this and how to solve it, please?
    Cheers!

    If you ran Logic Pro in 32bit mode first and then in 64bit mode.. any 32bit plugins which you have installed, will appear under either the Software Instrument button (In LP9) or the Insert FX button for a Software Instrument track....
    If they dont then either..
    You didn't install the AU version of the plugin.... in which case, please do so and then again run LP in 32bit mode and then 64bit mode to make the 32bit version appear in LP 64bit mode..
    or....
    You are not looking in the right place as shown below..
    or...
    You are trying to access a software Instrument on an Audio Track which wont work.. Create a Software instrument track and try again...
    or..
    You are not using a legal version of the 32bit plugin...... in which case, asking here is a bit of a dumb move...
    Here is a screenshot of where the Software Instrument button is in LP9... Click and hold.. on it and look for the 32bit AU plugin sub menu and choose Sylenth...

  • "3rd Party Plug-Ins" Not Showing Up In Preference Pane...

    I'm trying to install a couple of 3rd-Party Plug-Ins... Apparently the procedure for this is to go to Preferences, and in the "General" pane, there should be a heading that says "3rd Party Plug-Ins" along with buttons "Choose..." and "Clear" and a path.
    On my General Preferences Pane, there is no such section... It goes right from "Content Library & Templates" to "Media," with no "3rd Party Plug-Ins" listed anywhere in the pane.
    Using Motion 3.0.2.... Did something change and they didn't change the manual to match? Or is there some setting elsewhere that's making that option disappear?
    Thanks!!!
    Nick

    Howdy,
    The "3rd party plug-ins" section in the Library and preferences really refers to AE plug-ins. Third-party FxPlug plug-ins (like dvMatte or Boris Continuum) show up mixed in with the regular filters and generators.
    That "3rd party plug-ins" path setting in the preferences doesn't appear on Intel-based Macs, as they're no longer supported. If you have a PowerPC system, they'll show up (and so will the setting).

  • Exchange 2010 - Issues with Room Finder not showing available rooms.

    Hi,
    We are having issues with room finder not populating the room resources that are available inside a meeting request within outlook 2010. It also appears that there is a drop down box that is present in a lot of the other forums and pages that I have referenced
    for troubleshooting:
    Single Exchange 2010 server version 14.03.0224.002 running all roles. Migrated from previous Exchange 2003 environment and old 2003 server has been decommissioned.
    Room mailbox created and all configured resource policies are working correctly for creating meeting requests. A distribution group was created and the room mailboxes added to this DG as per instructions here: hxxp://exchangeserverpro.com/find-meeting-rooms/
    . We have recreated the OAB and confirmed that the Room mailboxes are part of this list.
    Does anyone have any ideas why the rooms are not showing up in the Room Finder box?
    If I have missed any information please feel free to ask for more info.
    Thanks, all help will be appreciated.

    Hi,
    According to your description, I understand that room finder cannot show available room in Outlook 2010.
    If I misunderstand you concern, please do not hesitate to let me know.
    I want to double confirm whether it works before, or it can’t work after decommission Exchange 2003? How about other Outlook version?
    The offline address book (OAB) is generated by Microsoft Exchange Server. In order for the Room Finder feature to work, the OAB must be generated by Exchange 2010 or a later version.
    Please run Get-OfflineAddressBook | FL Identity,Server to double check OAB generation server. Also, run Get-OabVirtualDirectory | FL to check URL for current OAB VD and force update OAB.
    Then open Test E-mail AutoConfiguration to double check whether Outlook get correct URL.
    After above complete, please try to switch to Send/Receive tab, click Send/Receive Groups, and then click Download Address Book.
    Thanks
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Allen Wang
    TechNet Community Support

  • Waves plug-ins not showing up in AU.

    My waves plug-ins never shows up in logic 7 or 8. But it works as AU under peak and Cubase (under VST). Any solutions?

    make sure you are using the latest Intel version, which is 5.9, as far as I know.

  • Boris plug ins not showing up in effect menu?

    I had to uninstall and reinstall my system. Everything is fine except my Boris effects are not showing up the effect menu. The disc was installed and the a copy of the folder is in the library app support and the FCP system support folder. Why don't I see them in the program?

    yes- I have the few Boris options that come with FCS.
    But I'm talking about the full Boris Complete effect application. The effects should be in the video filter drop down menu. For some reason they are not showing up.

  • Plug-ins not showing up in Aperture 3.1

    I have been using Aperture for a past few days, and when i tried to instal two plug-in programs (photoshelter - it is a photo hosting site and the plug in allows you to upload photos directly to the site, and HSC edit - this is an edit tool I downloaded from the Apple site). Neither of them show up in the menu of Aperture. I tried re-installing, but doesn't work. what could i be doing wrong?

    Frank,
    I have a similar situation that you seem like you might understand.
    I bought a new computer, started a new user (A), and downloaded Aperture. Then I realized it was easier to move the pictures from my old computer by transferring everything from that computer, creating another user (B) on my new computer. Since then I havent used user A at all, but now I can't access plug-ins for Aperture. Based on your posts above I checked user B and sure enough there are the plug-ins. I tried to repair permissions in the disk utility, and that didn't help. I restarted the program after each try.
    Any idea of what I might try next?
    On a separate note, I've been unhappy with this new macbook pro from the start, as compared to my old macbook, in terms of speed. Plus the battery life *****, which is a main reason i ditched the last one, no where near as advertised. Could an extraneous unnecessarily running/ partitioned in the background be creating any problems for speed or battery life? Or was dumping in everything from my old computer a bad idea?
    Thanks in advance to anyone who can help.

  • Editing software filters/plug-ins not showing in LR 5.4

    I have editing software and plug-ins that I use mostly in LR, but now I notice when I use them, the filters don't show up.  I have Google Nik Collection, Topaz suite, Photomatix and Perfect Effects 8.  I went to my LR preferences >external editing and the first editor I have is Photoshop. The sdditional external editor is HDR Efex pro 2.  In the Additional editor, should I be making that a new preset, or as a custom preset.  Am I only limited to 2 choices in the External editing preference pane?
    I notice that in the File>Export w/Preset, it lists HDR Efex Pro and Photomatix Pro.  Under file>Plug in extras, it lists Perfect Effects 8, and again, Export to Photomatix Pro. Opening any of them, the filters don't appear like they used to.  What am I overlooking? This is making me crazy with loss of time since I have a show coming up.  Any pointers would be appreciated.
    I am using a Mac, OS Mavericks which I just installed a couple of weeks ago.

    It isn't obvious, but you can add as many external editors as you want. In Preferences/External Editing, hit the Choose button, select an application, then from the dropdown select  "Save current settings as new preset". Repeat as needed.
    Hal

  • Plug ins not showing

    After migrating from tiger on a powerbook G4 to snow leopard 10.6.7 on 2.93 GHz i7 imac. all my plug ins are not showing in Garageband 11 (Atmosphere, Rmx, trilogie, FM7 etc ...)where should they go? I put some in HD> library> audio> plug-ins> components ... but still none showing when I am in GarageBand.
    Thank you for your patience

    You need to make sure that they are Universal Binaries, you can't use PPC plug-ins on an Intel machine.
    You might need to see if there are updates available from the mfg.

  • Photo Tools 2.6 plug-ins not showing up in CS6

    I copied Photo Tools 2.6 into CS6 Plug Ins but I can't find it anywhere when I open CS6.
    Suggestions/ideas?

    Hello, isn't there an installer you are supposed to use?
    You might want to wait for Jeff Schewe to show up in here.
    And do check this FAQ: http://forums.adobe.com/thread/965931?tstart=0

  • Plug-Ins not showing under "Audio Units"

    When I open up Logic and try to insert a new plug-in, the only thing there is Apple. I have the .component files in MAC HD > Library > Audio > Plug-Ins > Components. But they simply won't show up in Logic. I'm in 32-bit mode and I've tried 64. I've scanned and rescanned my audio units. They are all validated and checked. I've restarted Logic and my computer. Nothing. Any help?

    I have the "opposite" question. I have a lot of AU plugins in Logic but I can't find them in the expected places (as above, or in the User Library). I would like to remove some obsolete ones, but am totally clueless where they are. I have done Finder searchs, including system files, to no avail.

  • Anyone else having issues with folders / files not showing or showing stragely?

    Device: MacBook Pro (Retina, 13-inch, Mid 2014)
    If I open a new window from the desktop (Apple N), the folder either shows it's empty (even though it it's not) or the text has black bars over, or the text is jumbled.
    My downloads folder is actually full of files, but shows empty:
    Funky text (I intentionally blurred parts of the images, but the fonts get jumbled on their own):

    I have a mid 2010 mini (with Mountain Lion) and I just recently noticed I was experiencing this problem.The timezone thing didn't work for me.
    I *may* have fixed it though. I went into the Security / Privacy settings, selected the privacy tab, and *there* turned off location services and turned it back on.
    I think that worked - keep your fingers crossed! (So far, so good.)

  • Issue with Value Help not showing in Portal screen Please Help

    Hello Guru's,
    What is the best practice for doing ESS/MSS upgrade.
    Since everytime we upgrade the BP we need to redo all the customizations again in the new track and deploy.
    I have gone through Note 872892 and read the NWDI cookbook.
    I feel there should be some tool (which will tell the differences in Code from one track to other if so how to install and where to install?) or a better way to apply the customizations to the new track when we upgrade the ESS/MSS components.
    Appreciate your help.
    Thanks,
    Pramod

    these links should be handy
    http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417100)ID1620366250DB20044614760992422928End?blog=/pub/wlg/3390
    How to Migrate Developed Software Components to a New Release in NWDI

  • Catalyst - HELP with one page not showing in the design window.

    When using Catalyst, I can only see the html on one of my pages. The design tab is showing a blank page. Does anyone know how to fix this?

    You can setup a page branch that responds to your specific button and within that branch definition you can specify page items and values to be set when that branch fires.
    Is there a specific reason that you want the values passed on the URL? That's not really required to make ApEx function properly.
    Earl

  • Alternating colors with drilldown groups not showing in the primary group.

    Hi all,
    Not sure if it is possible in SSRS but... My alternating colors work in my row groups of the drilldown group, but I also want the primary group (in my screenshot category) to be colored as well. Is this possible at all when my structure is like below?

    Hi Yvanlathem,
    According to your description, you want to set the textbox background color only for the even rows within child group. Right?
    In this scenario, we can put expression into Fill tab in Textbox Properties. We can use IIF() and RowNumber() to make the background color only apply on the even rows. Try the expression below:
    =IIF(RowNumber("Parent Group Name") mod 2=0,"Color1","Color2")
    We have tested in our local environment. It looks like below:
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

Maybe you are looking for