Yamaha rxv 2700 using ethernet cable- is it possible

i have a yam rxv 2700 amp that has network capability ive connected from the old type express using the ethernet port on both but the amp doesn't find any thing and itunes says no speakers connected. is there a way around the problem. or do i have to use the line out cable
thanks

Is the AX you only router? Do you have another main router? How do you connect your network to the DSL?
Old type AX doesn't support ethernet in bridge mode. You have to get the new 802.11n version.
Also iTunes will only stream music to the AX's audio port (has both analogue and digital modes), not through the ethernet port.

Similar Messages

As a Verizon FIOS client, can we just use Ethernet cable to connect to time capsule, or do we need their router to connect to the time capsule?

As a Verizon FIOS client, can we just use Ethernet cable to connect to time capsule or do we need the Verizon router to connect to time capsule?

The Time Capsule is indeed a wireless router with simultaneous dual band capability...and a hard drive for backup purposes. You can use that to your advantage if you configure the Time Capsule as I suggested in Bridge Mode.
The Time Capsule will provide a 802.11n 5 GHz band and a 802.11n/g/b compatible 2.4 GHz band to allow virtually any device to connect to the network.
I suppose that you could also use the "g" wireless network provided by the Verizon router as a "guest" network or something similar if you really do need another wireless network.
It might be possible to configure the Time Capsule as the main router on the network....that's a question for Verizon. But even if you might be able to do this, I'm sure it is not supported by Verizon, so you would be on your own in the event of any Internet connection difficulties on your service.
And, since the Time Capsule does not have a built in modem....you would still need to add a separate modem to the installation anyway.
That's why my suggestion is to use the Verizon device as the "modem" and let the Time Capsule provide the dual band wireless network and of course, handle the Time Machine backups.

I need to repair a Macbook Pro with disk utility using target mode to another my iMac. Can I use ethernet cable or must it be firewire?

I need to repair a Macbook Pro with Disk Utility using target mode connected to my iMac. Can I use ethernet cable to connect them or must it be firewire?

Firewire

Hi, I connected to the internet in a different location using ethernet cable and when I got home websites like yahoo wont get to the sign in page and other sites too...weirdly facebook and google works ...please help...tearing my hair out!!!

Question
Hi, I connected to the internet in a different location using ethernet cable and when I got home websites like yahoo wont get to the sign in page and other sites too...weirdly facebook and google works ...please help...tearing my hair out!!!

and now, when i tried to check again my network preference below the airport tab is showing a message that
"my airport does not have an IP address and cannot connect to the internet!"
then after seconds it will goes back to the first message that
"airport has the self assigned IP address etc....."
i don't know whats going on now!
airport tab is not showing green color anyway! i'ts always in yellow!
i tried turning it on and off but nothing happen! HEEELLLLPP!!!!

I have a Macbook Pro (2013) OS 10.8.1. Moved into a university house and need to use ethernet cable. Bought the Thunderbold connection but when I try to use the ethernet with it a webpage comes up saying Wireless Setup? No idea what to do.

I have a Macbook Pro (2013) OS 10.8.1. Moved into a university house and need to use ethernet cable. Bought the Thunderbold connection but when I try to use the ethernet with it a webpage comes up saying Wireless Setup and Router Setup? I have previously used ethernets in similar situations and never had to input information like this?

I have tried to turn of the wi-fi but that doesn't work either. I think it could be a something to do with the internet provider because virginmedia comes up on the webpage. This is what comes up:
Wireless Setup
WGR614V9
V1.0.11_1.0.1VGUK
Wireless Setup
Name (SSID):
Security Passphrase (WPA-PSK):
(8-63 characters)
Channel:
01 06 11
Router Setup
Router Password:
(8-63 characters)
any ideas?!?

I want to connect to the internet using ethernet cable.

I want to use ethernet cable to connect to the internet. I follow the instructions, I am still unable to connect to the internet with the ethernet cable. I want faster browsing and uploads and download speeds

If you have a router connect an Ethernet cable from the cable/DSL modem to the WAN port on the router. Connect another Ethernet cable from one of the router's LAN ports to the Ethernet port on the computer. Open Network preferences, select the Ethernet port and click on the Advanced button. Click on the TCP/IP tab then select DHCP from the Configure IPv4 drop down menu. Click on the Apply button.
Turn off the computer, router, and modem. Wait at least one minute. First, turn on the modem and wait until the status lights indicate connection to your ISP. Second, turn on the router and wait until the status light shows communication with the modem. Last, turn on the computer.
If you do not have a router, then do the same as the above except that the Ethernet cable connects from the modem's Ethernet port to your computer's Ethernet port.

HT1529 how to connect to internet by using Ethernet Cable

how to connect to internet by using Ethernet Cable
I have apple mac book pro with retina display.plz send me the setting thank u

There's no setting. Plug in the cable to the adapter for either USB or Thunderbolt and plug the other end into your router. You can turn off wireless at that point.

HP Photosmart 7510 - loose connectivity when using Ethernet cable

Need help!
I have an HP Photosmart 7510 all-in-one printer connected to my home network via wireless.
I have 1 Windows7 laptop which successfully connects to the printer via the home Ethernet network (laptop connected via cat5) - so the overall system appears to be working fine on Windows.
I also have 1 MacMini running OS X 10.7.5 which can ONLY print/scan if the Ethernet connection is UNPLUGGED from the MacMini (thus forcing me to use my very poor and unreliable wireless signal).
As soon as I plug in the Ethernet cable to the MacMini I loose all connectivity to the printer. I have confirmed the Ethernet cable is good - as it works fine with my Windows7 laptop.
Has anyone figured out why I cannot use the physical Ethernet connection to communicate with the HP Photosmart?
Thanks!

Just making sure, you're running the Ethernet cable from the printer to the router, then running another cable from the router to the Mac, correct?
Have you added the printer's queue to the Mac once the Ethernet cable is connected, or does it not show up in Print and Scan?
I am a printer tech for HP.

Is there an adapter that allows youto use ethernet cables in hotels?

I travel for work and don't want to use wireless in countries such as Nigeria. Is there an adapter that will allow me to use the ethernet cable in my hotel room for the ipad2?

No. However, you can travel with an Airport Express. The hotel's Ethernet connects to the AEX. Then the AEX is configured to provide a local wireless network in the room. You will need the Airport Utility app for the iPad.

Migration assistant from windows to mac using Ethernet cable

I have just bought a year old MacBook Pro and have been trying to transfer date from my windows laptop to the mac using the migration assistant.
The first time I tried this process it tried to do it via wifi and the information message stated it would take 28+ hours, but the connection was lost after a few hours and the process stopped.
I would like to restart this using an Ethernet cable from the windows laptop to the mac, but when migration assistant starts it automatically defaults to wifi and doesn't give me an option of choosing to use an Ethernet cable.
How can I force it to use this cable? Because it will take too long by using wifi.

If you are going to Start Over... You may want to have a look here...
http://pondini.org/OSX/Setup.html
And here...
Migration Assistant tips and tricks

When using ethernet cables to use Migration Assistant - how are they used?, When using ethernet cables to use Migration Assistant - how are they used?

How do you wire the ethernet cables? This is from a novice. Do they go through the router or directly between computers using Migration Assistant?

Directly from one Mac to the other.
How to use Migration Assistant:
http://support.apple.com/kb/HT4889?viewlocale=en_US
http://support.apple.com/kb/HT4413?viewlocale=en_US
http://support.apple.com/kb/TS1963
Troubleshooting Firewire target disk mode:
http://support.apple.com/kb/HT1661

Internet won't work on MacBook Pro unless using ethernet cable

Hi everyone, I'm hoping someone can help me with this. We recently got a new NETGEAR N600 wirelesss ADSL2 modem router and when trying to set it up I found I couldnt use my MacBook, we had to use a the old PC to do it. The connection is set up and my iPhone and iPad as well as our PCs have no problem picking up the wireless signal, however I cannot seem to wirelessly connect wiht my MacBook Pro. I hav e to use the ethernet cable if I want to use internet on my MacBook. In Network Preferences it says wi-fi is connected however when I open up Safari it says that there is no connection. My friends have also been experiencing this problem with their macbooks lately.
Does anyone know how to get around this?
Thanks

Reboot the modem.

Slow Internet speed using ethernet cable.

Hi
I have a an old imac, still working and running on 10.5.8 !!
I still use it for music and simple word processing.
I have linked it up to the internet with a ethernet cable and the internet speed is vastly differnet to by ipad / iphone using wifi.
I syspect that its the imac and not the router?
Any idea what has gone wrong and why ethernet connect is not faster than wireless
Thanks

DOH!
It occurs to me --finally-- why you may be seeing this slowness on a wried connection. That latest G4 iMacs retained the 10/100BASE ethernet port Apple used to put on all consumer and educational Macs. The PowerMacs and PowerBook were considered "pro" models and had 10/100/1000BASE ethernet ports--much faster.
You may see improvement by going wireless if your iMac has USB 2.0 ports:
NewerTech MAXPower 802.11n/g/b High-Performance Wireles USB Adapter w/bonus ext cradle. For Mac & PC
It will give wireless "n" speeds if used in a USB 2.0 port--that's the protocol your other devices are probably using.
To see if you have USB 2.0 ports, hold OPTION and, while hlding it, click the Apple menu. In 10.5, the first entry should change to "System Profiler." Launch it.
In the opening screen:
find the code in the second line that I've indicated with the red arrow; for a G4 iMac the line will be "PowerMacx,x"--please post your code and your screen size (15, 17, or 20). From that we can find out if you have USB 2, making the wireless option viable.

Having a hard time connecting to my internet server. it says can't find the server. I'm using ethernet cable and I know that the cable is OK can somebody please help

I'm trying to get on the internet and it is saying unable to connect to your server any ideas what I have to do to get on the internet I know the ethernet cable is OK.

Disconnect the ethernet cable from your mac,
disconnect the modem and the router from the power,
wait for at least 30 seconds,
connect the power to the modem, wait for at least thirty seconds,
connect the power to the D-Link, wait for at least thirty seconds,
connect the ethernet cable to the mac.

Connecting HP Laserjet 500N using ethernet cable and router

I had my HP Laserjet 5000N connected to my wireless router via ethernet cable. It worked fine. But then I changed routers and can't remember how to reestablish the connect.
Can anyone help?
Thanks

no problems.
There is a priority order when multiple networking interfaces are available.
Ethernet is higher than Airport in the order.
If both ethernet and Airport interfaces are connected to the network, then ethernet becomes the primary networking interface.
If nothing is plugged into the ethernet port, then Airport will get control.

Yamaha rxv 2700 using ethernet cable- is it possible

Similar Messages

Maybe you are looking for