Yast2 channel-upgrade-oes command looking for wrong ldap server

a little background info
Today I upgraded our first OES-Linux server from OES11 to OES11sp1.This
was the first OES-L server that we installed for our migration from
NetWare. Everything has been working fine and today I upgraded it so it
would be at the same patch level as the other servers before we moved to
OES11sp2.
The upgrade went fine until the final step
I was following the "Novell Doc: OES 11 SP1: Installation Guide -
Channel Upgrade from OES 11 to OES 11 SP1"
The final step says:
"After the reboot, log on to the server and run the yast2
channel-upgrade-oes command to complete the OES services
reconfiguration. This will prompt for eDirectory" password...
When I put in the eDirectory password it fails with a message that it
cannot contact the LDAP server on the NetWare server that used to be our
main LDAP server. That server has been gone for almost 2yrs.
I'm assuming there is a conf file I can change the address in and move
forward. I poked around and could not find a file that had the old LDAP
servers IP address in it. Does anyone know where this configuration file
would be?

Nevermind - I spoke too soon (and apparently forgot how to use grep to
search for strings in files...)
it was reading the old NetWare server IP address in a file named
/etc/sysconfig/novell/edir2_oes11
I put the correct address into the /etc/sysconfig/novell/edir_oes11 and
it worked
On 4/12/14, 5:26 PM, Steve B wrote:
> a little background info
> Today I upgraded our first OES-Linux server from OES11 to OES11sp1.This
> was the first OES-L server that we installed for our migration from
> NetWare. Everything has been working fine and today I upgraded it so it
> would be at the same patch level as the other servers before we moved to
> OES11sp2.
>
> The upgrade went fine until the final step
> I was following the "Novell Doc: OES 11 SP1: Installation Guide -
> Channel Upgrade from OES 11 to OES 11 SP1"
>
> The final step says:
> "After the reboot, log on to the server and run the yast2
> channel-upgrade-oes command to complete the OES services
> reconfiguration. This will prompt for eDirectory" password...
>
> When I put in the eDirectory password it fails with a message that it
> cannot contact the LDAP server on the NetWare server that used to be our
> main LDAP server. That server has been gone for almost 2yrs.
>
> I'm assuming there is a conf file I can change the address in and move
> forward. I poked around and could not find a file that had the old LDAP
> servers IP address in it. Does anyone know where this configuration file
> would be?

Similar Messages

My itunes can not upgrade. it is looking for athe Itunes.MSI file, but it is unable to find it on the C:drive. How do I correct the error, and reinstall Itune for my Iphone, Ipad and Ipod?

My itunes can not upgrade. it is looking for athe Itunes.MSI file, but it is unable to find it on the C:drive. How do I correct the error, and reinstall Itune for my Iphone, Ipad and Ipod?

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Looking for MS SQL Server(2012 or older versions) all commands

HI,
Looking for MS SQL Server(2012 or older versions) all commands, i.e., all available sql server commands.
Is there any reference manual or MS KL to get all commands in SQL Server ?
Thanks in advance

Thanks for link
Sean Gallardy and Jingyang Li.
This is is not usefull for my requirement.
What i am looking is..SQL Server commands like examples... DDL/DML comands...create/alter
Examples: Insert/update/delete,truncate.......etc
Create database,create procedure.......etc
Alter database,shutdown,drop,create....etc
Looking for list of all commands in one place/doc in SQL Server.
Thanks

Since lion upgrade iMac keeps looking for old server

Hi,
I have a NAS prior to Lion upgrade which was working perfectly. Now with the Lion upgrade the NAS (Sitecom) ther were some issues. I have reinstalled the NAs and had given it a new name. I can find the NAs now so thats not a problem.
But almost every hour I get 2 warning that he can not find the "old NAS", it really start annoying me and I've looked everywhere and I don't even find any link (Finder) towards it so I don't know what to do to get rid of this message, receiving it every hour twice really start getting on my nerves.
Sorry for th Dutch, but the message translates;
A problem has occured with connecting to the server 'VanBeeckNAS'
The server doesn't exist or is currently not available. Check the servername or the IP-address of the server, ...
Any help is highly appreciated.
Peter

Same problem since lion. Not only can I not back up to the server it keeps looking for it several times on start up. Real annoying.

I am using garageband. May upgrade.I am looking for more sounds....

Hi,
I am looking for more guitar sounds and software sounds (violin). Does Logic Express provide this? Is there a list of what it provides (I mean different guitar sounds and software sounds for a MIDI keyboard)
Thanks!

Just add more sounds to GB.
"Upgrade" to Logic if you want more knobs to twist, not because you'd like a few more samples.

ITunes looking for wrong .xml filename, adding /

Hi,
I have been podcasting for about a year now. However, the last 4 weeks of my show haven't updated on my page and I have found out why...when I click on the information icon it is looking for the filename
http://www.deucecreative.co.uk/upload/traxsource/ts1_podcast.xml/
They have added a forward slash (.xml/) at the end. It is impossible to name a file that way, and I am not sure why it is looking for that filename. Nothing has changed on my xml and it doesn't appear that way anywhere else. I have validated it with feedvalidator and it's fine.
If I subscribe to "http://www.deucecreative.co.uk/upload/traxsource/ts1_podcast.xml" it works correctly, just won't update on the main page.
If anyone has some sort of solution it would be much appreciated. I have already tried to contact their support Thanks.

Hi Greg,
Thanks for replying. I actually tried to add that line it to point it to the correct filename. I see that that xml doesn't validate so I have removed it and re-uploaded a valid one.
http://www.deucecreative.co.uk/upload/traxsource/ts1_podcast.xml
here is a direct link to get a better idea of what it happening..
http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=271121520
That only goes up to week 61. Should go up to 64. Once you subscribe & try do download you get the ( i ) error message.
If I get <itunes:new-feed-url> to point to a valid xml do you think that might solve the problem?
Thanks again.

[Solved] System is looking for wrong shared library version

Hey guys.
Today I installed updates on my two arch machines, both running SLiM + XFCE4, using `pacman -Syu`. The update on one machine worked like a charm, but broke the other.
When booting and trying to login with SLiM, the screen goes black and I'm back at SLiM. The log shows this:
xfce4-session: error while loading shared libraries: libicule.so.50: cannot open shared object file: No such file or directory
Of course there is no such file, because I installed icu 51.1-1 and there is only libicule.so.51 in /usr/lib/.
I tried to re-download and re-install icu and xfce4-session in rescue mode, or creating a symlink for libicule.so.50 pointing to the new, but nothing changed. I always drop back to SLiM. On the second system there is no error, I installed the new icu package, rebooted and logged in as usual.
I downgraded to icu 50.1.2-1 and I can login again. But it seems that some other applications are breaking now. (vim e.g.)
Any ideas how to fix this?
Greetz Corubba
Last edited by Corubba (2013-03-28 14:30:59)

Today I tried to update icu along with lib32-icu, but the result was the same. Still looking for libicule.so.50.
I have run `ldconfig -v` to check the symlinks, and it uses the v51 library.
And it seems not be to be a XFCE related problem, when installing v51 I can't even start vim because it also wants v50. So it has to be something other.
On both systems, the LD_LIBRARY_PATH variable is blank. When running `ldd /usr/bin/xfce4-session`, it get the same result as running it. One machine said "not found" because looking for v50, the other is using v51 and all okay.
Maybe some problem with the dynamic linker? I'm not very familiar with libraries and linking stuff.
Last edited by Corubba (2013-03-28 11:20:37)

Java.lang.NoClassDefFoundError: Weblogic looks for wrong drivers

Hi all,
I have a strange problem with weblogic. I use weblogic7.0 with MS SQLServer database.
All my jdbc related code from anywhere within my web application works without
a problem.
But when I try to access the database as a client using weblogic's datasource(obtained
by JNDI lookup), I get the NoClassDefFoundError. Weblogic seems to be looking
for some Oracle drivers strangely, where as I don't have any thing related to
Oracle at all. It breaks on getConnection() call on data source. My connection
pool and data source are defined properly and I have the JDBC drivers for SQLServer
in weblogic's classpath and also in client's classpath(although not required).
Again, all the database access code within my session beans using the same datasource
works fine. Weblogic server and the client application are running on the same(local)
machine.
Any help would be appreciated.
Thanks in advance.
Vas
Here's the stack trace.
java.lang.NoClassDefFoundError: oracle/jdbc/driver/OracleStatement
     at java.lang.Class.getMethods0(Native Method)
     at java.lang.Class.getMethods(Class.java:737)
     at weblogic.rmi.utils.Utilities.getRemoteMethods(Utilities.java:382)
     at weblogic.rmi.internal.StubGenerator.<init>(StubGenerator.java:79)
     at weblogic.rmi.internal.StubGenerator.<init>(StubGenerator.java:60)
     at weblogic.rmi.internal.StubGenerator.getStubClass(StubGenerator.java:637)
     at weblogic.rmi.internal.StubGenerator.generateStub(StubGenerator.java:656)
     at weblogic.rmi.internal.StubGenerator.generateStub(StubGenerator.java:651)
     at weblogic.rmi.extensions.StubFactory.getStub(StubFactory.java:59)
     at weblogic.common.internal.RemoteObjectReplacer.resolveObject(RemoteObjectReplacer.java:249)
     at weblogic.rmi.internal.StubInfo.readResolve(StubInfo.java:134)
     at java.lang.reflect.Method.invoke(Native Method)
     at java.io.ObjectStreamClass.invokeMethod(ObjectStreamClass.java:1610)
     at java.io.ObjectInputStream.readObject(ObjectInputStream.java:388)
     at java.io.ObjectInputStream.inputClassFields(ObjectInputStream.java:2258)
     at java.io.ObjectInputStream.defaultReadObject(ObjectInputStream.java:514)
     at java.io.ObjectInputStream.inputObject(ObjectInputStream.java:1407)
     at java.io.ObjectInputStream.readObject(ObjectInputStream.java:381)
     at java.io.ObjectInputStream.readObject(ObjectInputStream.java:231)
     at weblogic.common.internal.ChunkedObjectInputStream.readObject(ChunkedObjectInputStream.java:140)
     at weblogic.rjvm.MsgAbbrevInputStream.readObject(MsgAbbrevInputStream.java:91)
     at weblogic.rmi.internal.ObjectIO.readObject(ObjectIO.java:56)
     at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:161)
     at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:128)
     at weblogic.jdbc.common.internal.RmiDataSource_WLStub.getConnection(Unknown Source)
     at com.actiontech.jmetro.server.core.DBSession.executeQuery(DBSession.java:109)
     at com.actiontech.jmetro.server.query.NamespaceMappings.loadMappings(NamespaceMappings.java:76)
     at com.actiontech.jmetro.server.query.NamespaceMappings.<init>(NamespaceMappings.java:56)
     at com.actiontech.jmetro.server.query.NamespaceMappings.getInstance(NamespaceMappings.java:50)
     at com.actiontech.jmetro.server.query.NamespaceMappingsTest.testSave(NamespaceMappingsTest.java:21)
     at java.lang.reflect.Method.invoke(Native Method)
     at junit.framework.TestCase.runTest(TestCase.java:154)
     at junit.framework.TestCase.runBare(TestCase.java:127)
     at junit.framework.TestResult$1.protect(TestResult.java:106)
     at junit.framework.TestResult.runProtected(TestResult.java:124)
     at junit.framework.TestResult.run(TestResult.java:109)
     at junit.framework.TestCase.run(TestCase.java:118)
     at junit.framework.TestSuite.runTest(TestSuite.java:208)
     at junit.framework.TestSuite.run(TestSuite.java:203)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:360)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.run(RemoteTestRunner.java:246)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.main(RemoteTestRunner.java:146)

Hi all,
I have a strange problem with weblogic. I use weblogic7.0 with MS SQLServer database.
All my jdbc related code from anywhere within my web application works without
a problem.
But when I try to access the database as a client using weblogic's datasource(obtained
by JNDI lookup), I get the NoClassDefFoundError. Weblogic seems to be looking
for some Oracle drivers strangely, where as I don't have any thing related to
Oracle at all. It breaks on getConnection() call on data source. My connection
pool and data source are defined properly and I have the JDBC drivers for SQLServer
in weblogic's classpath and also in client's classpath(although not required).
Again, all the database access code within my session beans using the same datasource
works fine. Weblogic server and the client application are running on the same(local)
machine.
Any help would be appreciated.
Thanks in advance.
Vas
Here's the stack trace.
java.lang.NoClassDefFoundError: oracle/jdbc/driver/OracleStatement
     at java.lang.Class.getMethods0(Native Method)
     at java.lang.Class.getMethods(Class.java:737)
     at weblogic.rmi.utils.Utilities.getRemoteMethods(Utilities.java:382)
     at weblogic.rmi.internal.StubGenerator.<init>(StubGenerator.java:79)
     at weblogic.rmi.internal.StubGenerator.<init>(StubGenerator.java:60)
     at weblogic.rmi.internal.StubGenerator.getStubClass(StubGenerator.java:637)
     at weblogic.rmi.internal.StubGenerator.generateStub(StubGenerator.java:656)
     at weblogic.rmi.internal.StubGenerator.generateStub(StubGenerator.java:651)
     at weblogic.rmi.extensions.StubFactory.getStub(StubFactory.java:59)
     at weblogic.common.internal.RemoteObjectReplacer.resolveObject(RemoteObjectReplacer.java:249)
     at weblogic.rmi.internal.StubInfo.readResolve(StubInfo.java:134)
     at java.lang.reflect.Method.invoke(Native Method)
     at java.io.ObjectStreamClass.invokeMethod(ObjectStreamClass.java:1610)
     at java.io.ObjectInputStream.readObject(ObjectInputStream.java:388)
     at java.io.ObjectInputStream.inputClassFields(ObjectInputStream.java:2258)
     at java.io.ObjectInputStream.defaultReadObject(ObjectInputStream.java:514)
     at java.io.ObjectInputStream.inputObject(ObjectInputStream.java:1407)
     at java.io.ObjectInputStream.readObject(ObjectInputStream.java:381)
     at java.io.ObjectInputStream.readObject(ObjectInputStream.java:231)
     at weblogic.common.internal.ChunkedObjectInputStream.readObject(ChunkedObjectInputStream.java:140)
     at weblogic.rjvm.MsgAbbrevInputStream.readObject(MsgAbbrevInputStream.java:91)
     at weblogic.rmi.internal.ObjectIO.readObject(ObjectIO.java:56)
     at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:161)
     at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:128)
     at weblogic.jdbc.common.internal.RmiDataSource_WLStub.getConnection(Unknown Source)
     at com.actiontech.jmetro.server.core.DBSession.executeQuery(DBSession.java:109)
     at com.actiontech.jmetro.server.query.NamespaceMappings.loadMappings(NamespaceMappings.java:76)
     at com.actiontech.jmetro.server.query.NamespaceMappings.<init>(NamespaceMappings.java:56)
     at com.actiontech.jmetro.server.query.NamespaceMappings.getInstance(NamespaceMappings.java:50)
     at com.actiontech.jmetro.server.query.NamespaceMappingsTest.testSave(NamespaceMappingsTest.java:21)
     at java.lang.reflect.Method.invoke(Native Method)
     at junit.framework.TestCase.runTest(TestCase.java:154)
     at junit.framework.TestCase.runBare(TestCase.java:127)
     at junit.framework.TestResult$1.protect(TestResult.java:106)
     at junit.framework.TestResult.runProtected(TestResult.java:124)
     at junit.framework.TestResult.run(TestResult.java:109)
     at junit.framework.TestCase.run(TestCase.java:118)
     at junit.framework.TestSuite.runTest(TestSuite.java:208)
     at junit.framework.TestSuite.run(TestSuite.java:203)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:360)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.run(RemoteTestRunner.java:246)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.main(RemoteTestRunner.java:146)

How do I stop mavericks from looking for an old server and nagging me that it can't find it?

MacBook Air running OS X 10.9.4
Had it set up to connect to my main iMac for shared files. Wife complained that when my iMac wasn't on the MacBook constantly nagged her with a message saying it couldn't connect to the server (my iMac).
Removed sharing on my iMac. Removed recent server list from the MacBook Air. Removed my iMac from the finder side bar in the MacBook. Now the MacBook Air constantly naggs us that it can't find the server (name of my iMac). I just want the @#$@# thing to shut up, quit looking for the iMac and be quiet.
Need help as I can't figure this one out.
PLEASE!!

There are many possible causes for this issue, and it may be hard to resolve. Please take each of the following steps that you haven't already tried. Back up all data before making any changes.
If you get the alert in the login screen before you log in, stop here and ask for instructions.
Step 1
If you get the alert as soon as you log in, it's probably caused by one of your login items or by software that otherwise loads at startup or login. Ask if you need help identifying it. A known offender is "AdobeResourceSynchronizer," which is a component of some Adobe products. See also this discussion.
Step 2
If there's an icon representing the server in the sidebar of a Finder window, hold down the command key and drag it out.
Step 3
In the Finder, press the key combination command-K or select
          Go ▹ Go to Server...
from the menu bar. In the upper right corner of the window that opens is a Recent Servers popup menu represented by a clock icon. From that menu, select
          Clear Recent Servers…
and confirm. Test.
Step 4
Open the Printers & Scanners pane in System Preferences and delete any network devices you no longer use.
Step 5
Triple-click anywhere in the line below on this page to select it, then copy the text to the Clipboard by pressing command-C:
~/Library/PDF Services
In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. A folder may open. If it does, move the contents to the Desktop, or to a new folder on the Desktop. Log out and log back in. Test. If there's no change, put the items you moved back where they were and continue.
Step 6
Open the folder
~/Library/Preferences
as in Step 5 and move the file named "loginwindow.plist" items in that folder to the Trash, if it exists (it may not.)
Log out and back in again, and test.
Step 7
Other possible causes are references in the iPhoto, iTunes, or iMovie library pointing to the server, and bookmarks in the Preview application.
Try rebuilding the iPhoto library.
Step 8
Disconnect all wired peripherals except those needed to start up. Start up in safe mode. Test. After testing, restart as usual (not in safe mode) and verify that you still have the problem.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Step 9
Triple-click the line below to select it:
/System/Library/CoreServices/Directory Utility.app
Rght-click or control-click the highlighted text and select
          Services ▹ Open
from the contextual menu.* The application Directory Utility will open.
In the Directory Utility window, select the Directory Editor tool in the toolbar. Select Mounts from the Viewing menu in the toolbar, and/Local/Default from the node menu, if not already selected. On the right is a list of names and values. By default, the list is empty. If it's not empty, post a screenshot of the window and stop here.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.
Step 10
Open the following file as you did in the last step:
/etc/auto_master
It will open in a TextEdit window. The contents should be exactly this:
# Automounter master map
+auto_master          # Use directory service
/net               -hosts          -nobrowse,hidefromfinder,nosuid
/home               auto_home     -nobrowse,hidefromfinder
/Network/Servers     -fstab
/-               -static
If there are any other lines in the window, post them. Otherwise, close the window.

Looking for a client/server that supports multiple protocol and delivery

Hi all, I don't know if this the right place to ask my question,here it goes.
I am looking to develop a client-server that supports multiple protocols such as HTTP, HTTPS etc. I am looking for a framework( i don't know if that is correct or I need some kind of web-service (soap etc)) that would manage connection, security etc. I would like to like to devote most of my time in developing business objects with multiple delivery mechanism such as sending serilized java objects, xml message or soap message, or in some case JMS message as well. So I need a client server that can come in via TCP/IP or HTTP or anyother industry standard protocol and I should be able to service him with pub/sub model and also request/response model as well.
I don't know if I had explained what I need, I would like to know what technologies I should be evaluating and which direction I should be heading... Also the server I'm developing should be free of Java constraints if needed...
Also this service is not webbased service as now but if need arises I should have a flexibilty to make them web enabled in future. Also I would like to work with open source webservers or appservers if I need

Inxsible wrote:I installed i3 - along with the i3status - which I still have to figure out. I am liking what I see as of now. It reminds me of wmii -- when I used it way back when. However I do not like the title bar. I would much rather prefer a 1 px border around the focused window.
"i3 was created because wmii, our favorite window manager at the time, didn't provide some features we wanted (multi-monitor done right, for example), had some bugs, didn't progress since quite some time and wasn't easy to hack at all (source code comments/documentation completely lacking). Still, we think the wmii developers and contributors did a great job. Thank you for inspiring us to create i3. "
To change the border of the current client, you can use bn to use the normal border (including window title), bp to use a 1-pixel border (no window title) and bb to make the client borderless. There is also bt which will toggle the different border styles.
Examples:
bindsym Mod1+t bn
bindsym Mod1+y bp
bindsym Mod1+u bb
or put in your config file
new_window bb
from: http://i3.zekjur.net/docs/userguide.html (you probably already found that by now )

Looking for an Audio Server Solution

Alright, so I've got a headless server running in my bedroom that I use for storage. I already stream media to my ps3 using ps3mediaserver, but what I'd really like to be able to do is play music remotely from my desktop and laptop. I've spent some time looking around for solutions, but can't really come up with anything. As such, I'm looking for some help!
What I'd like to do:
* Keep all music stored on the server
* Access the music remotely in a nice gui interface (Rhythmbox would be ideal, but something similar would work too)
* Play the music out of my desktop or laptop's speakers, not out of the server
I played around with mpd some, but ultimately gave up. I could get it to stream with http, but I was having to stream it to vlc and control it with another program... Not the best solution.
Any ideas? All help is greatly appreciated

tomk wrote:
gabe.benson wrote:I'm attempting NFS, but I have no rpcbind.service file on my system. rpcbind is installed, but when I attempt to start the services with systemctl it tells me that rpcbind.service doesn't exist.
Are you sure your system is up to date? systemd support was added to the rpcbind package in April this year,
Oddly enough it's working now. No clue what changed.
As for MPD, I've pretty much given up. Thanks for the suggestions and help!

Exchange 2013 in coexistence with 2010, Outlook keep looking for Exchange 2010 server slow connection

All,
not sure if this topic has already answered, but can't find anything around.
Here's the scenario. Migrating from a single Exchange 2010 to a cluster of 2 + 1 Exchange 2013. Two in a site, One in the other site (DC).
I have migrated successfully a firsat batch of users. Mail flow works perfectly. The only thing is that often the migrated users are experiencing a long time (about 30 minutes) to get their Outlook syncronized. Both OL 2010 and 2013 doesn't make any difference.
They're using OL Anywhere, and I've already tried to rebuild the profile.
From a check on the OL connection status, looks like they're still looking for something on EX2010, but no idea what could be. If I disable the cache mode it works smooth and quick.
My best guess is that is something in cache they're trying to keep updated... but still this doesn't explain the huge delay.
Any help would be highly appreciated!
Thanks!

Hi Alessandro,
What happens in OWA? I guess it should be good.
Did you have public folders with Exchange 2010? Were they moved over to Exch 2013? Technically you should move the PF to the latest version from the legacy version before moving over the users?
- Moved the PF to OL2013. same behaviour
May be the outlook clients are looking for th OAB? Did you move the OAB to Exchange 2013?
- Did this too.
Try running outlook on safe mode and see what happens? may be one of the outlook add-in's are looking for something on Exchange 2010?
- Will try that....
Can you do a Test Email Auto Configuration in outlook (Hold CNTRL key and right click on outlook icon on status bar) and see if the exchange url's are pointed to Exch 2013?
- Will try that....
Is this happening to all migrated users or specific? Are they BlackBerry users?
- All users and there are no BB users
Do you have any archived emails on those migrated users? May be outlook is looking for some archived stuff on the Exch 2010 side?
- I instructed Exchange to migrate also the archiving database, however There are no archived mailbox on 2010
Could this be because of any calendar entries? May be migrated user mailboxes are having issues with working with non-migrated mailbox calendars?
- This maybe a possibility. I have only 10 users actively using Exchange, while all others have the mailboxes only because they've Lync. I've completed all migrations today, so there shouldn't be anything left on 2010
Let me know how it went - all the best!
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. Regards, Siva

Loaded up version 5.0. When I did so, suddenly cannot access any of my favorites as Firefox says it is looking for a "proxy server."

Tried to load up Firefox version 5.0 on Saturday due to your lack of firewall support of Version 3.6 which led to a virus in my system that I was able to resolve out of the system once I went to "Safe Mode" and restored to previous date. In loading up your latest version, when I went into my Firefox Internet browser and tried to call up my Favorites, received message that Firefox was looking for a "proxy carrier" and I was unable to access any of my folders.

You can find the connection settings in Tools > Options > Advanced : Network : Connection
If you do not need to use a proxy to connect to internet then select "No Proxy"
See "Firefox connection settings":
* [[Firefox cannot load websites but other programs can]]

Looking for finger/LDAP like in.xfingerd

Hi,
I am looking for a finger daemon that will work with LDAP, similar to the old in.xfingerd. As I understand it, in.xfingerd is no longer distributed as part of openldap.
I've looked at something called fingerbob, but this program recommends itself for internal network use only.
Any ideas?
Thanks

Google search for the specific item that you want and plenty of suppliers web sites will give you what you want, some free some for purchase.
eg " clip art clown"

Looking for a Content Server 4 Trainer asap.

I have a need for a Content Server trainer in Colorado asap and would love some help.

I can guide you ? But me in Islamabad, Pakistan.
Thanks, Shafqat,
[email protected]

Yast2 channel-upgrade-oes command looking for wrong ldap server

Similar Messages

Maybe you are looking for