Yellow screen with direct update to v2.0.1

Hi, I purchased an iPhone 3G a couple of days back, after ofcourse having read about the yellow tinted screen problem and that the second version of firmware 2.0 fixing it.
I intended to do a software "restore" via iTunes with my iPhone out of the box, hoping that the yellow tint would get corrected. However, iTunes automatically updated the firmware to v2.0.1 (5B108) but the tint didn't get corrected.
I tried downgrading my firmware to v2.0 via iTunes but it does not work (gives me a 13xx error).
Could anyone please help me with this ?
Many thanks in advance...

To restore it, try the option to "Restore the default toolbar set" as shown here - https://support.mozilla.com/kb/Back+and+forward+or+other+toolbar+items+are+missing
If that does not work, try the option to "Reset toolbars and controls" in the same article.

Similar Messages

My Mac 10.7.5 won't shut down after new software (security update 2013-003) installation-- hangs at grey screen with "software update" at top. It also intermittently goes to sleep without my asking. What to do?

My Mac 10.7.5 won't shut down after a new software installation (Security Update 2013-003). It just hangs at a grey screen with "Software Update" at the top. I have to force quit, then restart-- but the new software hasn't installed.
My Mac also intermittently goes into Sleep mode, repeatedly, unprompted by me. I suspect a connection between these two problems.
I have tried deleting the /Library/Updates folder. It hasn't helped. The update still won't install, and my Mac won't shut down without my forcing the quit.
Help please!

Hi, I've just come accross the same problem... did you manage to get a resolution??
Cheers, Chris.

Infoobject - Inforource with direct update

Hello guys
I'm having one infoobject for which the infosource with direct update is ticked. But for the same, i'm not able to assign any datasource.
The steps which i followed are given below.
1)Created datasource and replicated at BW
2)Right clicked on infosource and clicked on Assign datasource, selected required source systems, but not able to find the Dar\tasource which i have created. ( the datasource is not being assigend to any other info source)
The otherway i tried is as follows
1)Clicked on source system, drilled down to corresponding DS, and right clicked on that and selected Assign infosource and given the require infosource name but in my transfer rule i'm not able to find anything. its empty even if my communication structure is having 4 info objects.
Anyone faced this problem before or my way of doin it itself is wrong?
Thnx in advance
Regards
Sriram

Hello Sanjay,
Once you export data source and after getting success message, BW generates data source for any infosource irrespective of direct/flexible update. Please do following steps in order to find it out...
1. Select an appropriate infosource and say "Generate Export Data Source". Take an instance for "ZSPNUMBER" infosurce which loads attribute and master data.
2. Now go to RSA2 transaction and search for 8ZSPNUMBERM and 8ZSPNUMBERT as BW appends 8 in starting and type at the end.
Hope it helps you.
Thanaks and Regards,
~Ketan Patel.

Master data attributes with direct update...its very urgent

Hi all,
Could anyone tell me how to laod the master data attributes with direct update in the infopackge..
provide steps to create master data attributes and how to load..
Thanks,
Manjula

Hi Manjula,
Flexible Uploading
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used
honor with points if this helps,
Sudhakar

Characteristics - Master data Tab- infosource with direct update

Dear Experts,
Please explain me in Laymans Language as i am new to BI (but am an ABAP consultant).
In Info Object Characteristics, Master data Tab there is infosource with direct update with an application Component.
1. Now my doubt is, when i specify the Application Component, this infosource would appear under the application component in Modeling->Infosources.
Then on this infosource i would right click and create the info pakage and then data transfer process.
is it correct?
2. Suppose for this characteristic if i dont specify the infosource with direct update then it wont appear in the infosource, so how can i load data in this case?
Regards
BI Learner

Hi,
Using an InfoSource with direct updating, master data (characteristics with attributes, texts, or hierarchies) of an InfoObject can be updated directly (without update rules, only using transfer rules) into the master data table. To do this you must assign it an application component. The system displays the characteristic in the InfoSource tree in the Data Warehousing Workbench. You can assign DataSources and source systems to the characteristic from there. You can then also load master data, texts, and hierarchies for the characteristic.
You cannot use an InfoObject as an InfoSource with direct updating if:
i. The characteristic you want to modify is characteristic 0SOURSYSTEM (source system ID).
ii. The characteristic has neither master data nor texts nor hierarchies. It is therefore impossible to load data for the characteristic.
iii. The characteristic that you want to modify turns out not to be a characteristic, but a unit or a key figure.
To generate an export DataSource for a characteristic, the characteristic must also be an InfoSource with direct updating.
1. *Now my doubt is, when i specify the Application Component, this infosource would appear under the application component in Modeling->Infosources.
Then on this infosource i would right click and create the info pakage and then data transfer process.*
The characteristic will be available in info source tree, you can assign a datasource->assignsource system->create package->load data.
2. Suppose for this characteristic if i dont specify the infosource with direct update then it wont appear in the infosource, so how can i load data in this case?
For a characteristic If you dont specify 'InfoSources with Direct Updating' then it wont appear in infosource tree.

Error handling for master data with direct update

Hi guys,
For master data with flexible update, error handling can be defined in InfoPackege, and if the load is performed via PSA there are several options - clear so far. But what about direct update...
But my specific question is: If an erroneous record (e.g invalid characters) occur in a master data load using direct update, this will set the request to red. But what does this mean in terms of what happens to the other records of the request (which are correct) are they written to the master data tables, so that they can be present once the masterdata is activated, or are nothing written to masterdata tables if a single record is erroneous???
Many thanks,
/ Christian

Hi Christian -
Difference between flexible upload & Direct upload is that direct upload does not have Update Rules, direct upload will have PSA as usual & you can do testing in PSA.
second part when you load master data - if error occurs all the records for that request no will be status error so activation will not have any impact on it i.e. no new records from failed load will be available.
hope it helps
regards
Vikash

Change communication structure for master data with direct update

Hi All,
I am having a problem with a change I want to make to some master data. I have added the attribute to the characteristic, but when I have gone to change the communication structure, its not possible (the add line button is greyed out)
I can see the new infoobject in the datasource/trans structure, but not in the comms structure (And yes it is in change mode ).
The master data uses direct update, and I have read that this causes some hassles in changing the comms str.
Can someone please give me some steps in doing this??
Thanks
Ryan

Hi Ryan,
Why u have nothing to map is ?
U r datasource trasfer structure from the source ssytem has nothing new ..
1)TO ur Info object u can only write the routing or give any formula or anythign like the trasfer rules oftions that have when u click on the IO icon..
2) Enhave the structure of the datasoruce that is getting from the R3 source system...
3) Replicate it ..
Then only u will be able to find the extra field at the Trasfer structure... to map to the IO which have been added..
hope it helps
regards
AK

Track Pad not working on some screen with new update

I just updated the software today on my 9900 and now on some screen the track pad won't let me scroll up and down. The screens it is causing issues on are:
- home screen will only let me scroll to the title (All, Favorites, etc). It is like I cant go from the title to the app icons
- in bbm wont let me scroll from my top contact to where my chats are
- it also wont let me do any punctuation....when i push the alt key it shows up that it has been selected but when i try to make an exclammation mark nothing happens
- when typing it lags really bad and doesn't catch all the letters im inputting
The right and left scrolling work fine but is like there is some imaginary fence in certain spots. Anyone else having issues with this or know of a fix?

I'm going to bet a battery pull would correct most of the issues you're facing. Remove your battery while your phone is powered on then replace it.
If that doesn't do the trick, we have other options we can examine but start with that and let us know if that helps.
Cheers.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Update Screen with the updated entries?

I have create a simple interface where user can see the entries that are in the tab view.
I have a delete button where once pressed, LOV will pop up and allow the user to choose which entry they wish to delete.
When the user has selected the entry, it will be deleted from the db.
Now my question is: how can I update the screen such that the screen will show the updated entries in the db.

the problem is that the entries are already shown on the screen... in a tab view.
Hence, the button allows a lov to pop up for user to select which one to delete.
I have added the commit but it doesn't refresh. I have to manually click on the next and previous entry button to see the newly updated screen.
So is there a way to refresh the screen without doing the manual refreshing?

Infosource to be used for both Direct update and Flexiable update

Hi,
I had a Data source 0CUST_SALES_ATTR.
A infosource is created Direct Update of Master Data from DS:0CUST_SALES_ATTR to 0cust_sales.
So the Data source 0CUST_SALES_ATTR is being used to load ATTR data of 0CUST_SALES.
Now as per my requirment created a new Z infoobject to use for Transtive attributes....How can i use the same data source 0CUST_SALES_ATTR to load 0CUST_SALES (Direct Update) and the new Z infoobject using Transfer & Update rules.
and
Question:
Will it be possible to switch the current Infosource with direct update to Flexiable update with out deleting the Transferrules as there are lot of routines in the transfer rules
Thanks
Edited by: suser1234 on Oct 5, 2010 11:21 AM

Hello Sir,
How did you handle your above problem I am into a compeltely similar situation. Your help would be appreciated if you can share the approach you followed.
Thanks,
-Su

Maps app is hanging on a yellow screen. Can I reinstall somehow?

I can kill the app, relaunch, and I get a yellow screen with the page curl on the bottom right, and several buttons on the edges, but nothing else.

Sounds like the 'white screen of death'.
Try rebooting your phone. Take the battery out for a few minutes then re-insert battery and see what happens. It may take some time to reboot. There have been numerous "fixs" for this problem, but until RIM come up with a definitive answer to stop it happening, then really theres nothing we can do except try some things. The battery pull has been offered on a few forums and some say it worked for them. Worth trying again.
You could always try THIS
but that seems a bit extreme, but may work if the reboot doest. Do you remove the battery whilst its still on? thats how you normally do a reboot. take batt out whilst powers on. Sorry if this doesnt help, but i know theres people all over the net that get this issue.

After last upgrade, my iphone 3GS has a yellow screen and won't come on.

Hi
I really need help... I have recently upgraded my iPhone 3GS to 4.2.1 and there was a flash of white screen, followed by a yellow screen with lines across it. iTunes shows a error message and the phone is now dead. It won't go on. It does go into the DFU mode but thats all about it. Please help as I urgently and desperately need my phone on ....
Thank you in advance.

Gretchen230 wrote:
Thanks for the reply. I tried that and it didn't work because the screen was completely frozen. I broke down and took the thing to the Apple Store and they discovered there was a loose wire in it that had to be reconnected. This is the second phone which has failed because of "workmanship. "The microphone went bad on the first phone and now this issue. Both phones may have had 2 hours on them and as a new comer to the iphone, I am not impressed. I paid cash for the phone and no insurance. I assumed it would have lasted several years like my other phone of which brand name I won't mention. The phone was great when it worked but when it doesn't it is very frustrating when the touch pad is frozen.
I understand, you can mark this answer as "This solved my question" so that more people can see it if they have the same problem.

Flexible update or Direct update

Hi Gurus,
When we load the master data using a generic extractor from R3 to BW, which update(direct or flexible) is preferable. Can you please tell me about the pros and cons.
Thanks,
Regards,
aarthi
[email protected]

Hi Aarthi,
Direct or Flexible update will actually be dictated by which Infosource the datasource needs to be attached to. If this data is just going to the InfoObject, then you can work with direct update. If the data extracted by this datasource has to be fed to multiple objects/targets, then you need a flexible update as this involves update rules from the InfoSource into the data targets.
There is really no pro and con to each method, but just the decision as to whether you need another layer of processing (update rules) or need to push the data to multiple targets.
Hope this helps...

Flexible update Vs direct update.

Hi Experts;
could someone explain what are flexible and direct updating of Infosource, I kind of know the definitions but need more explanations.
Krishma

Hi Krishma;
InfoSources with Flexible Updating:
For an InfoSource with flexible updating, the data from the communications structure is loaded into the data targets (InfoCubes, ODS objects, master data) using update rules. Several data targets can be defined by one InfoSource. The InfoSource can contain transaction data as well as master data.
InfoSources with Direct Updating:
Master data (characteristics with attributes, texts or hierarchies) of an InfoObject can be updated directly (without update rules, only using transfer rules) to the master data table with an InfoSource with direct updating. To do this you must assign it application components. The characteristic is subsequently displayed in the InfoSource tree in the Administrator Workbench. You are able to assign DataSources and source systems to the characteristic from here. You are also able to load master data, texts, and hierarchies for the characteristic.
Hope it makes clear to you now.
Regards:
BK

How can I directly update a SAP screen table control with values?

I have a need to update a table control on a standard SAP screen with values. Here's the scenario: The user will come into a standard SAP transaction (IQS2-change notification) and click on an action button which calls a function module. That function module will determine what needs to be added to the SAP screen table control (add additional task rows). When the function module returns with the row data to be added to table control, I would like to set those values as if the user input directly. The table control is located on it's separate tab (TASKS) in the transaction. I cannot find any user exists or BADI's for this transaction to allow me to affect the TASKS tab table control for this GUI. I'm trying to prevent from having to make a custom modification. If anyone has any ideas, please let me know. Thanks.

Hi,
Check these enhancements:
IWOC0002      PM/SM notification: Check whether status change is allowed
QQMA0001      QM/PM/SM: User Subscreen for Notification Header
QQMA0008      QM/PM/SM: User Subscreen for Additional Data on Notif. Ite
QQMA0011      QM/PM/SM: User Subscreen for Additional Data on Task
QQMA0013      QM: Default Values when Creating a Task
QQMA0014      QM/PM/SM: Checks before saving a notification
QQMA0015      QM/PM/SM: User-Exit before Call-Up of F4 Help on Catalogs
QQMA0016      QM/PM/SM: "User data" Function "Goto" --> "Task" Menu
IWO10026            User check on setting status 'Do not perform'
IWO10027            User exit: Generate user-defined settlement rule
IWOC0001            Create PM/SM notification: Determine reference object
IWOC0002            PM/SM notification: Check whether status change is allowed
IWOC0003            PM/SM authorization check of ref. object and planner group
IWOC0004            Change single-level list editing PM/QM/SM ALV settings
Regards
Appana

Yellow screen with direct update to v2.0.1

Similar Messages

Maybe you are looking for