Yoga 11 no wifi after upgrading to Windows 8.1

I have a Yoga 11 which I have just upgraded to Windows 8.1.  I now have no wifi on the Yoga.  When I go to device manager and check "Broadcom 802.11bgn Wireless SDIO Adapter" it says "This device cannot start (Code 10)".
Any ideas?  I'm about to toss this thing out the window.  I've had wifi connectivity issues since I bought it, and this update seems to have killed it.

Salheureux, welcome to the forum.
You should go into the Control Panel / Sound to assure that your sound device is set to Default.  Also, right click on the speaker icon in the Taskbar / Playback devices and check that your speakers are displayed.
Please click the "Thumbs Up+ button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Similar Messages

  • Problem with connecting to free wifi after upgrading to Windows 8.1 from Windows 8

    Hi
    I had problems with connecting to free Wifi after upgrading my PC(Notebook) to Windows 8.1 from Windows 8. As I travel a lot within europe, I am used to being able to connect to Free Wifi(those that dont need a key or password to enter) but soon after downloading
    Windows 8.1 I almost never was able to do this. I'd always get «LIMITED» even though the signal was strong.This was so fustrating,so much so that I reset my PC to clear it of Windows 8.1 and am now back to Windows 8.This is a shame because I was really liking
    using Windows 8.1 and if not for this problem(which is a big one) I'd still be using it. If I download Windows 8.1 again from the Windows store what is the probability that I'll have the same problems?
    Thanks Portozzygirl

    More often than not when a device isn't working it is because the driver has become corrupted. Re-installing a fresh copy should help
    http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isnt-working-properly?SignedIn=1
    http://captaindbg.com/how-to-update-drivers-on-windows-7/   (works on win 8 too)
    Wanikiya and Dyami--Team Zigzag

  • S3-S440 no wifi after upgrading to Windows 8.1

    After upgrading to windows 8.1, the wifi is not working anymore.
    I cannot find the wifi driver in the device managerment and I cannot see any information about wifi driver.
    I try to re-setup the driver many times and checked the wireless module was enabled in the BIOS. But it is no progressing at all. I can only access to the Internet through the wire now...
    Please help me.!!!

    Salheureux, welcome to the forum.
    You should go into the Control Panel / Sound to assure that your sound device is set to Default.  Also, right click on the speaker icon in the Taskbar / Playback devices and check that your speakers are displayed.
    Please click the "Thumbs Up+ button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Wifi problem of G560 after upgrading to windows 8.1

    Hi,
    I have a lenovo G560. After upgrading from windows 8 to windows 8.1, I cannot connect to wifi. I was wondering if someon else has the same problem.

    hi amardoukhi,
    Welcome to the Forums.
    Your issue might be similar to this thread. Try the solution that was posted to rollback to an older driver version.
    The solution was to:
    1. Open Device Manager (press WInkey+R > type devmgmt.msc)
    2. On the Device Manager, navigate to Network Adapters > right click on the wireless adapter and choose Update Driver Software
       - Link to picture
    3. On the Driver Update Window, choose Browse my computer for driver software >  Let me pick from a list of device drivers on my computer and choose the wireless card on the list.
       - Link to picture
       - Link to picture
       - Link to picture
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Not able to switch on WiFi and Bluetooth after upgrading to Windows 10

    I was using Windows 7 Home Basic preinstalled with the laptop since 2011. The laptop was working fine. After upgrading to Windows 10 the WiFi and Bluetooth is not working. Tried help from Microsoft remotely. According to them the drivers are not working and there is no updated drivers available for Windows 10 on HP website. The driver installed presently is "Broadcom 4313GN 802.11b/g/n 1x1 Wi-Fi Adapter".Please help and advise whether to stick with Windows 10 or to roll back to Windows 7 as I have an option to purchase a removable device to use WiFi and Bluetooth.I love the lightness of the new operating system. Please help!!!

    If you have already reset your iPad the next would be to restore it agin. After that talk to Apple. Also see previous threads:
    http://discussions.apple.com/thread.jspa?messageID=11485805&#11485805
    http://discussions.apple.com/thread.jspa?messageID=11485803&#11485803

  • Networking Issues after Upgrading to Windows 8.1

    I have a Windows 8 desktop PC that is working fine with my network.  I can browse the Internet fine using all major browsers etc.  After upgrading to Windows 8.1 through the Windows Store I noticed that my wired networking was not working correctly.
     The status of the network does not change (i.e. it doesn't change to Limited Connectivity) however browsing to sites in Chrome, IE or Firefox doesn't work as well as Windows 8.
    IE11 gives me the error "This page can't be displayed, make sure the web address is correct" and other browsers give a similar error.  I normally have to refresh 2-3 times to get a new page to load, sometimes even more.  Everything works
    fine from a laptop connected at the same time so it isn't an network issue with my provider.
    I thought this might be a driver issue with the two on-board Marvell wired network adapters.   I wasn't able to rollback the driver to older versions I found on the Internet.  I then purchased another network card, Intel Desktop gigabit and the
    issue still persists with that adapter.  I then tried a USB wireless adapter and the issue still persists using wifi with the wired adapters disabled.  I tried a new network cable and no luck either.  I also tried resetting the IP stack using
    the various netsh commands.
    After that I thought I might try reset the Windows 8.1 PC, however that didn't work as I didn't have the restore image available as I upgraded from the Windows Store.  I then tried installing Windows 8.1 fresh using a ISO with my Windows 8 key using
    some of the recent guides that are available.  That all worked but it didn't fix the networking issues.
    I re-installed Windows 8.0 and the networking is now fixed and back to working normal again.  I'd like to try again but I think I will have the same problems.  I can't imagine why this would be a driver issue as I tried 3 different network adapters
    and two installs of Windows 8.1.  Any ideas what would be the cause of the Windows 8.1 issue?

    HI,
    Since this issue only occurred in the your desktop PC, and many network adapters you tried, failed, thus I think maybe we should focus on the model of your desktop PC, I suggest you update the BIOS and chipset from the manufacture to improve
    the performance of win8.1.
    Please also test this issue in safe mode with networking.
    Please refer to:
    Windows Startup Settings (including safe mode)
    http://windows.microsoft.com/en-in/windows-8/windows-startup-settings-including-safe-mode
    I’d like to share the following article with you:
    Wired and wireless network problems
    http://windows.microsoft.com/en-IN/windows/network-connection-problem-help#network-problems=windows-81&v1h=win81tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1
    Regards,
    Yolanda
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.
    The issue occurs in safe mode as well under Windows 8.1.  The motherboard is an Asus P5B Premium, however it works on Windows 8.  How would I update the chipset when booted into Windows 8.1?  In Device Manager it wasn't allowing me to update
    the network drivers as they were newer versions already installed.
    Edit:  I also installed at Intel Chipset Device software dated 8/8/2013 with version 9.​4.​0.​1026 and the issue still occurs.  I am also running the latest BIOS that is available.

  • Problems connecting to the internet after Upgrade from windows 8.1 pro

    Cant connect to the internet after upgrading to windows 8.1 pro, what can i do to rectify this problem?
    Thanks

    Hi,
    You can also try to install the older version in compatible mode:
    Windows 8.1 Wifi showing "limited" or "No Internet Access"
    Solution: revert your network adapter driver back to an older version
    http://blogs.technet.com/b/dennis_schnell/archive/2013/08/31/windows-8-1-wifi-showing-quot-limitied-quot-or-quot-no-internet-access-quot.aspx
    In addition, disable power management on your network driver:
    Open Network and Sharing Center.
    Click the Change adapter settings link in the upper left of the navigation pane.
    Right click the network connection you want to enable/disable power management support on and click Properties .
    Click Configure .
    On the Power Management tab, clear the Allow the computer to turn off this device to save power check box.
    If the issue still persists, please upload the event log for our research:
    Kate Li
    TechNet Community Support

  • Drivers issue for Lenovo u400 after upgrading to Windows 8

    I recently upgraded to windows 8 an after that facing driver issue for ATI Radeon graphic card and wifi, and also cypress trackpad  software is not working. All the supported drivers provided by Lenovo for windows 8 are fake and none of them are working. I even tried to search for drivers for graphic card from AMD website but unable to find any suitable drivers.
    And to my surprise when i called lenovo technical support for help, the representative told that no such upgradation is possible for older system, but in Lenovo wesite it is clearly mentioned that upgradion is possible and they are provinding windows 8 drivers for this model which does not works at all :-(
    Kindly some one suggest some workaround for this issue.
    Solved!
    Go to Solution.

    I had the same problems with the Cypress driver after upgrading to Windows. Based on I did I downloaded the Windows 8 driver for the Ideapad U300s and it works GREAT. There were no compatibility issues, shows up in Device Manager etc. It also has and icon on the task bar that responds to the F6 key for disabling. Best yet this driver has a Palm Rejection tab. I set it for heavy and no wild pointer movements so I find I now keep the trackpad enabled. NOTE: the file name of the driver I downloaded and installed is: Ogt102w8. Hope this helps you and can't figure out why Lenovo has a driver listed for the U400 that does not work while this driver works great.

  • Cannot print a PDF file after upgrading to Windows 8.1

    Cannot print a PDF file after upgrading to Windows 8.1
    I can print anything else from either the Desktop or Start but not a PDF.  No error message but just does not print.
    Update: down loaded Adobe Reader which runs on the desktop so when I read a PDF file it now runs on the desktop and I can print it.

    Cannot print a PDF file after upgrading to Windows 8.1
    I can print anything else from either the Desktop or Start but not a PDF.  No error message but just does not print.
    Update: down loaded Adobe Reader which runs on the desktop so when I read a PDF file it now runs on the desktop and I can print it.

  • After upgrading to windows 8, spectre 14 usb3 slow

    are there any usb3 fast drivers for spectre 14 after upgrading to windows 8, the drivers of windows 7 there are not compatible with windows 8

    Hello rumbacha.  I understand you're trying to locate some drivers for your SPECTRE for Windows 8.  
    There are quite a few versions of the SPECTRE so I will need your product number to identify exactly which model you have.  This document can show you where the product number is located.
    Once I have this I will attempt to locate the drivers for you.
    Have an excellent day!
    Please click the white star under my name to give me Kudos as a way to say "Thanks!"
    Click the "Accept as Solution" button if I resolve your issue.

  • After upgrading to Windows 8.1 firefox longer works. I got it to load but screen is either blank or doesn't go to target address

    after upgrading to Windows 8.1 from 8 nothing works correctly. Firefox 1st received 'unable to load XPcom' After resetting and uninstalling several times Firefox now loads to either a support screen or blank screen. It accepts address input but doesn't execute to target. So far I have been unable to roll back upgrade.
    Although IE11 works, it doesn't work correctly.

    It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    *https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
    If you keep having problems then do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
    Download a fresh Firefox copy and save the file to the desktop.
    *Firefox 24: http://www.mozilla.org/en-US/firefox/all.html
    Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
    *Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    *(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
    *(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
    *It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    *http://kb.mozillazine.org/Uninstalling_Firefox
    Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Profile_backup
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • After upgrade to Windows 8.1, ipod nano 7th gen not recognized

    /after upgrading to Windows 8.1, ITunes does not recognize my ipod nano 7th gen.  I have uninstalled and reinstalled ITunes but no luck.  I have gone through all steps in troubleshooting, but it still doesn't recognize it.  Help!

    Hi cindywindy,
    If your iPod Nano is no longer recognized in iTunes after a recent system upgrade, you may find the following article helpful (apologies if you have already seen it):
    Apple Support: iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Regards,
    - Brenden

  • Keyboard wireless key not working after upgrading to windows 8.1

    Hello,
    I am having hp pavilion dv6-6165tx notebook, where keyboard having a wireless button that turns ON and OFF all wireless devices, After upgrading to windows 8.1, HP Connection Manager is not getting installed, as well as Key is not working, key color turns red and white but no action is performed.
    Kindly suggest me some solution.
    Note: HP Doesn't provide drivers for windows 8/8.1 ONLY WINDOWS 7 for hp pavilion dv6-6165tx.
    Thanks.

    Hi @Jayesh_Bhadja ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv6-6165tx Notebook and the Wireless keyboard not working correctly. Here is a link to troubleshoot the keyboard.
    The HP Connection Manager is something that is for Windows 7 not Windows 8.1. I would uninstall this from your Notebook.  Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating. It has a troubleshooting tool in this.
    Make sure all your updates have been completed. I would try restarting my Notebook a few times.
    If that does not help I would uninstall the keyboard from the Device manager.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Problems with your HP printer after upgrading to Windows 8.1

    If you are experiencing problems with your HP printer after upgrading to Windows 8.1 please click on the below link and install the HP Print and Scan Doctor and run the utility to fix the issue.
    www.hp.com/go/tools.
    I was an HP employee
    If I have helped you solve your issue please mark it as solved
    **Say Thanks By Clicking on the Kudos Star**

    Hi.....my laserjet 1536dnf mfp was working perfectly with win 8 pro....then I installed win 8.1 pro and now the computer ,which is part of a network,can not communicate with the scanner of the printer--it prints just fine. On another computer (running win 7 ) on the same network, the scanner and all other printer functions  work just fine.
          I have tried installing the latest drivers from HP......scanner still not "communicating" with computer.....also temporarily disabled firewall.....please help...all the best -David G (gossat)

  • Can't print in PSE11 after upgrading to windows 8.1

    I have just upgraded from Windows8 to 8.1 and now can't print in PSE11. For some reason can in PSE7

    I can print from other programs but not PSE. I have updated the drivers. I have attached 3 screen shots with error messages.
    Tracy Ferreira 2607 Woodruff Rd.
    Suite E-126
    Simpsonville, SC 29681(864)350-4724www.onthespotportraits.com  
          From: hatstead <[email protected]>
    To: Tracy Ferreira <[email protected]>
    Sent: Tuesday, March 10, 2015 1:58 PM
    Subject:  can't print in PSE11 after upgrading to windows 8.1
    can't print in PSE11 after upgrading to windows 8.1
    created by hatstead in Photoshop Elements - View the full discussionWhat happens when you try?Any error messages?Do you have the latest drivers for the printer? If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7274523#7274523 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7274523#7274523 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Photoshop Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Maybe you are looking for

  • Problems with image sizes

    There seems to be lots of confusion about image sizes and Apple iBookstore Support  et al simply state that images should not be greater than 2 megapixels. IBook Author Help > Photos and other images,  states:- Important:  When you export your book f

  • I need to install servlet-api.jar in the libext folder.

    Hi I am doing a tutorial on struts 2.0.11. i need to install servlet-api.jar in the libext folder which I have created inside WEB-INF Now I have downloaded servlet.api which is in the zip form. When I extract the files. Its giving me two folders 1. j

  • Slow loading flash ecards on website

    We are creating ecards for one of our artists... however we cannot get them to load fast enough on the website. Check out our ecards on www.pme-c.com/artists/pamelagladding or www.pamelagladding.com Is there a way to create our cards using Flash MX P

  • OIM 11gR2 Change default query on users manager field

    Hi, we are trying to change the default behaviour of users manager field. When a user is creating another user on OIM, he should only be able to select a particular type of users. So we would want to filter manager field based on a particular user ro

  • Javax.ejb.EJBException; Local class not compatible ???????

    Hi, Can you any one help me to resolve this exception below. The conext is I have successfully deplyed a bean and when i call the bean remot method I am getting the following exception. Can you any one help me in what situations we will get this type