Yoga 2 Pro - Keyboard lock not working in stand mode

Where can I find the Yoga Utilities suite (Yoga Transitions, Chef, etc.). I just isntalled fresh 8.1 Enterprise and turns out the D:\ partition didn't have the Yoga Utilities available, same on the support site (checked Yoga 13 as well). Pretty dumb, but I can't use the stand since the keyboard doesn't lock

Hi i have this problem did you find a solution other than lenovo transition because i downloaded that and it still doesnt work....
can you please help me if you have any ideas.
my keyboard does not lock or disable in stand mode and sometimes it stops working in laptop mode...
any help would be greaatly appreciated

Similar Messages

  • Touchsmart 520-1047c Mouse and Keyboard will not work after sleep mode

    I have an issue which I need some help with. When my computer goes to sleep the wireless mouse and keyboard will not work unless I restart, however each one will wake the system up but will not operate after that. I have tried just making the display go to sleep, both go to sleep but that makes no difference same issue occurs. The only work around I have found is going into the power settings and turning the sleep mode off for booth the computer and display. This does not solve the problem it just masks it. New batteries, unplugged and replugged the dongle, updated the bios and all drivers. Don't know what else to try. Anybody know how to fix this? Thank you in advance for your help.

    Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that the mouse and keyboard on your desktop computer does not work if your computer enters sleep mode, and I would be happy to assist you in this matter! To correct this issue, I recommend following the steps in this document on Troubleshooting sleep and hibernate issues (Windows 7). This should help enable your system to wake from sleep mode using your wireless keyboard and mouse. I also recommend connecting wired peripherals to diagnose the functionality of your keyboard and mouse. If your system is still not able to wake from sleep mode, please follow the steps below to restore the default power schemes on your computer: Step 1. Click the Start button
    Step 2. In the search box, type "Command Prompt"
    Step 3. Right-click Command PromptStep 4. Click Run as administrator
    Step 5. At the command prompt, type powercfg /restoredefaultschemes and press Enter  reference: http://superuser.com/questions/669571/windows-8-1-64-bit-power-schemes-gone Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
    Regards  

  • HT201181 mcbook pro keyboard is not working correctluy

    my macbook pro keyboard is being weird.
    If I hit the 1 key I get the volume increase-  If  - The issue seems to only be with the number keys.  Some of the other renumbers are behaving strange too. I tried a restart that did not help.
    I also tried to hold the power button down until I got the fast flash. still same issue.

    Take it in for repair.
    Please, in the future just use the regular default font. You are shouting at us.

  • Macbook Pro keyboard keys not working

    I am honestly so fed up. For the past three days keys have not been working. It started with the question mark and slash button now it's the command, six button, equal sign, and I'm typing in the dark because the key that increases the keyboard light is not working. Soon enough the backlight key will stop working and I'll be in the dark. I've read a couple forums and have tried every single troubleshooting that they've suggested and nothing seems to work. I also can't take it in anytime this weekend due to work. Anything I can possibly do (question mark). Also, trying to fix the question mark button I seemed to have ripped off the key and now it won't go back into place. my question is will apple replace this for free. Thank you. Also, I seemed to notice that the problems started occuring after I bought one of those keyboard covers. Pretty sure that has something to do with it. Since I'll probably have to go in on monday is there anyway I can change some keys so that for example, when I press shift and another button i'll get a question mark. Thank you.

    The easiest thing to do might be to get an external keyboard for the moment. As for replacing the key for free, you might get them to do it. If it's just a matter of getting the keycap back on, they probably will. If you broke it off and damaged the keyboad circuitboard, the whole keyboard assembly may need replacement.
    Have you tried resetting the SMC and PRAM?
    SMC
    http://support.apple.com/kb/ht3964
    PRAM
    http://support.apple.com/kb/PH14222

  • My MacBook Pro Keyboard Is Not Working!

    please help it wont work my keyboard!!

    Take it in for repair.
    Please, in the future just use the regular default font. You are shouting at us.

  • Keyboard is not working on Macbook 1.83GHz with Windows XP Pro

    Hi
    There is a problem in Macbook 1.83 GHZ (Macbook 13-Inch Mid 2007 Combo) the keyboard is not working some times when I boot from Windows XP install Disk, after installation of Windows XP Operating System.
    Either I install first Mac OS x 10.4.9 then Install Windows XP Pro through bootcamp 1.2 Completion of both Operiting System I boot through Windows XP bootable CD OR I install Windows XP with out Mac OSX, in both conditions when i boot my computer through Windows XP bootable CD some times my built in keyboard (or external USB keyboard) does not work.
    Not only one Macbook is effected there are many.
    I request you to please advise to resolve this hot issue.

    Has any one had problem like this, plz share to resolve this issue.

  • I had a mac pro system..from last 2 days the keyboard is not working properly..if i typed a key but it displayed 2 or 3 keys..what is the problem? is keyboard gone..?

    i had a mac pro system..from last 2 days the keyboard is not working properly..if i typed a key but it displayed 2 or 3 keys..what is the problem? is keyboard gone..?

    Hey ynareshbabu,
    Thanks for the question. I understand you are having issues with your keyboard. The following article provides some great troubleshooting steps:
    One or more keys on the keyboard do not respond
    http://support.apple.com/kb/TS1381
    You may want to refer to the "Some keys don't work as expected" section.
    Thanks,
    Matt M.

  • My Macbook Pro keyboard AND USB keyboard will not work.  However, the trackpad and USB mouse will work.  Any help?

    My Macbook Pro keyboard and USB keyboard will not work.  However, the trackpad and USB mouse will work.  Any help?
    This is quite frustrating, since it randomly occured as I was browsing the web.  It seemed to happen out of nowhere.  I cannot login to my user account because I cannot type my password. 
    Any help will be appreciated.
    -Matt

    If you have another Mac, boot the non-working one into Target Disk Mode (holding down "T" at startup). Hook up the two Macs via a Firewire cable. The non-working one will mount on the other Mac as an external Firewire HD.
    Next, download the 10.5.6 Combo update from here:
    http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1056comboupdate .html
    Run it. When it asks you for a destination, choose the other Mac that was mounted via Firewire. When it's done, unmount the computer and restart it. The keyboard and mouse should work now.

  • I buy macbook pro occsaion ; i download osx 10.8.2 and reintal osx , after 2 days  my keyboard is not working correctly ( i mean when i touch the keys ,i see the symles , icant get letters when i type .  i try externel keyboard but is work

    i buy macbook pro occsaion ; i download osx 10.8.2 from internet  and reintal osx , after 2 days  my keyboard is not working correctly ( i mean when i touch the keys ,i see the symles , i cant get letters when i type .  i try with externel keyboard but is work

    Thanks for the reply but there is no option tab or wake for administration use in mountain lion 10.8.2, I only have the wake for network access which is on, I didnt used to have this problem before snow leopard now I have to manually re-login after computer wakes and then access remotely ........

  • MacBook Pro Backlit Keyboard does not work

    Hello all!
    I recently bought a used MacBook Pro (late 2008, 2.4 GHz Core2Duo) and the backlight on the keyboard does not work. I have reset the SMC and the PRAM, I have the latest firmware (EMI and SMC) and still no luck. I am hoping this isn't a hardware issue, but what can I do to fix this?

    I think there is a sensor on the top left. It looks like  a little speaker thing. If you swipe your finger over it, it activates/deactivates it. I read this somewhere online. Works for me most of the time if it's not lighting up and showing the 'no/stop' symbol.

  • Lock and keyboard sounds not working?  what's up with that?

    lock and keyboard sounds not working?  what's up with that?

    Im having the same problem. Just stopped working yesterday two days after i bought it!!!!

  • My screen is black and keyboard is not working. USB is good. Caps lock light will not turn green like I have no power. Any suggestions

    My screen is black and keyboard is not working. USB is good. Caps lock light will not turn green like I have no power. Any suggestions

    Ouch, doesn't sound good, but...
    Have you done a PRAM reset, CMD+Option+p+r...
    http://support.apple.com/kb/HT1379
    In fact, do 3 in a row, takes a bit of time.
    Intel-based Macs: Resetting the System Management Controller (SMC)...
    http://support.apple.com/kb/HT3964

  • Keyboard does not work after using Support Drivers

    I have a Macbook Pro 4,1 15" 2.4GHz C2D, and managed to get Bootcamp installed on it with Win7 Home Pro. I have verified that it runs correctly, but it is missing many of the drivers needed to make things run smoothly. I no longer have my Leopard disks that the machine came, so I figured the WindowsSupportDrivers would be the way to go.
    When I install them and reboot, the keyboard does not work. When I hit capslock, I get the caution notice indicating underneath my password field indicating the capslock key is on, so it's not like my entire keyboard is disabled. The system is unusable right now, since I have to enter my password to login, and it does not take any keyboard input. Using an external keyboard did not resolve this issue.
    I did a system restore to get it back to a usable state for the time being.
    Is there an alternative to the BCA support drivers or the Leopard disk? What's going on with my keyboard after the driver update?

    Maybe you have installed obsolete drivers. If you have Lion, open Boot Camp Assistant (Applications > Utilities) in OS X and download Boot Camp drivers

  • After Recovery with CD Satellite C660-1FE keyboard does NOT work

    Hello,
    A month ago I purchased a Toshiba C660-1FE. After three weeks my HD broke down. I bought a new HD from Western Digital and replaced the broken HD. As I did not make an recovery image of my HD, I had to order the Product recovery discs off the Toshiba website (3 discs, of which disc 1 and 3 were the only one's required for installation).
    Now, I have the problem that my laptop keyboard does not work. I am currently using a USB keyboard and mouse to replace my keyboard and touchpad of the laptop.
    The laptop keyboard works fine in BIOS. Therefore, I hope it's just a driver problem.
    I have:
    tried finding and installing lots of drivers on from the toshiba website, no result.
    tried changing settings in the bios (usb enable/disable).
    tried to fix the problem by re-installing the entire computer again several times.
    The keyboard seems to work until windows loads. When the system is starting up I can press caps lock and num lock and the green lights come on. This all stops working once the windows startup symbol appears.
    Perhaps a second problem in the device manager: under the display-adapter, 2 subcategories have exclamation marks: it says Mobile Intel(R) 4 series express chipset family twice! I can't seems to fix these with any drivers I can find either. When I check the settings I have this message (google translate since it was in dutch):
    +The digital signature for the drivers for this device is required, can not be verified. Possible after a recent hardware or software change a file that is installed incorrectly signed or damaged, or is malicious software installed from an unknown source. (Code 52)+
    +You need to restart the computer to this device changes to take effect.+ (obviously I tried that too)
    Can someone please give me some help? I am at the end of my wits.
    Sincerely,
    Daniel

    Hi MisterX,
    thank you for your response. I have tried these things and there is no such thing as PS2/keyboard in device manager. It's as if the Hardware is not even recognizable in windows. I am starting to doubt whether I got the right Backup CD.
    I wrote the following e-mail to [email protected]:
    +Dear Toshiba,+
    +after receiving the recovery CD's for my toshiba c660-1FE, it turns out that the drivers for the keyboard and touchpad are not installed. I have tried many things to get around this but it seems to me that I have received the wrong product recovery CD's. The chipset drivers are not the right ones, the overall layout of this version of windows 7 is different from before and when looking for answers in the toshiba forum I have concluded that the recovery CD's could be the wrong ones.+
    +My laptop: Satellite C660-1FE+
    +serial: 5B378048K+
    +Part-nr: PSC0LE 02M0TU26DU+
    +Recovery CD's I received are CD's 1-3 with serial R14254DU+
    +Would you be so kind to check whether these CD's should be 100% compatible with my laptop?+
    +This would be greatly appreciated,+
    +Daniel+
    MisterX, do you know any other emails I can forward this too? Or anyone who could perhaps tell me if I got the right CD's? They are taking their time to respong to this...
    Kind regards,
    Daniel

  • A row from cap to return on Keyboard is not working.

    It is for 17' Apple PowerBook G4 1GHZ. I bought it used off craigslist for cheap. The only wrong with it is one row on keyboard is not working from caps lock to return. Other than that, everything is working. Why? Is there a way to get a row on keyboard to work before I go ahead to order a used keyboard replacement off ebay? Let me know and thank you!

    About the only thing to try, really, in this case is to reseat the keyboard ribbon connectors, which may clear things up.  Otherwise, a new keyboard is probably the answer, though less pricey at this link, or just Google search "922-5776 keyboard" for more options.
    Not an easy process, unfortunately, as one finds in the iFixit manual pages for that machine's keyboard, but reseating the connector is definitely the thing to try first.
    Not to gloat, but it is trivial on a Titanium model.

Maybe you are looking for