Yosemite creates additional spaces?

Hi folks, I have a small situation on my mac?
I'm currently using a 27" iMac with a 24" Dell connected via a mini-displayport to HDMI converter and I'm noticing that every now and then, OSX will create another space or two (desktops). I know I should have two desktops, One for my iMac and one for my Dell...but why is it always creating more than 2? I've seen it happen during bootup, sometimes it happens while I'm working. When I go check, I'll see Desktop 3 and 4 created.
Is my installation bad or something? Thanks!

Are you using apps in Full Screen? Every Full Screen app gets its own Desktop in Mission Control.

Similar Messages

  • Why after deleting all 70 gb of movies on my macbook pro do I still show 60gb in the storage section on About this Mac? I am trying to create enough space to load Yosemite.

    I am trying to create enough space to load Yosemite.
    I currently have about 5.4gb of unused space.
    I have deleted about 70gb of movies (all movies from the "files") but still show some 60gb of movies under "storage" in "about this computer". I have no idea where these could be.
    There is also about 150gb of "other" that cannot be all the files (I do not have that many )
    Would be grateful for suggestions on how to create more space on my computer

    Jeff Cane wrote:
    I am trying to create enough space to load Yosemite.
    I currently have about 5.4gb of unused space.
    I have deleted about 70gb of movies (all movies from the "files") but still show some 60gb of movies under "storage" in "about this computer". I have no idea where these could be.
    There is also about 150gb of "other" that cannot be all the files (I do not have that many )
    Would be grateful for suggestions on how to create more space on my computer
    Have you emptied the trash since deleting files?
    How many files are on your computer, I would dare to guess that you, just like me, don't actually know that. The 150GB are files on your computer (regardless of whether you think they are not) the next step will be to identify them.

  • How do you create additional free space on the volume containing the iPhoto library?  I have plenty of HD space.

    How do you create additional free space on the volume containing the iPhoto library?  When attempting to import images from a CD I get an "Insufficient Disk Space" message albeit there is plaenty of additional space on the hard drive.

    How much free space do you have on your hard drive?  Try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home/Library/ Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your
    User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
    or with Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
    Data/Library/Caches/com.apple.iPhoto folder
    3 - launch iPhoto and try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences.
    NOTE 2:  In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.

  • Somehow, I created 2 Appe ID's...1 from home and 1 from work.  I purchased additional space on iCloud with one ID, but I need to transfer it to the other.

    Somehow, I created 2 Appe ID's...1 from home and 1 from work.  I purchased additional space on iCloud with one ID, but I need to transfer it to the other.

    Having read some other posts I think I have answered my question. If I was somehow able to terminate my old (unwanted) account and Apple ID I would no longer be able to access the material I bought with that ID-  so I'm stuck. I have to learn how to manage that situation.
    This is unfortunate for Apple consumers. Life is complicated for families these days and this "rule" although it is in place to prevent cheating and fraud makes things unnnecessarily difficult for me and my family as in my niaevity (sic) with the online world I bumbled into this situation. Not everyone is out to rip off Apple - one of the worlds richest corporations- or the entertainers who market their work through iTunes.I would just like to be able to enjoy the entertainment I pay for where and when I like to on whichever computer is available to me. And I'm not terribly computer literate.   
    It would have been nice to have had the opportunity to speak just once to a real person in the employ of Apple to explain my situation to them.

  • How to add/create additional page in Crystal Report Layout SAP B1

    Hi,
    I wanna ask about How to add/create additional page in Crystal Report Layout SAP B1 ?
    I want when user print Purchase Order then on last page also print some page like Penalty Clause etc.
    Pls help me to find the solution.
    Br,
    Thomas Marsetyo

    Hi,
    In your report footer, set it to create a new page before it is printed (In 'Section Expert', select the Report Footer -> 'Paging' tab -> Check 'New Page Before' checkbox). Throw your Terms & Conditions into the Report Footer section.
    If you already have a Report Footer that you want to keep, just split the footer into two sections (Right-click the Report Footer section -> 'Insert Section Below') and follow the same procedure for the newly created section.
         Check this Link
    http://stackoverflow.com/questions/9232239/adding-an-additional-page-to-end-of-a-crystal-report
    http://www.crystalreportsbook.com/forum/forum_posts.asp?TID=18960
    Regards,
    Manish

  • What is the best way to create additional storage AND backup a laptop, as well as the storage?

    Beyond being seriously annoyed at an Apple Employee recommended we go the NAS route at an Apple Store no less—only to find it doesn't work for storage OR Time Machine backups of iPhoto (after spending weeks organizing/transferring date, outside of a good deal of coin)—we are now perplexed as how to set up/store based on our needs.
    Goals
    Create additional storage (iPhoto, iTunes, documents) for the family laptop
    Accessible by anyone/device on the home network (iPad, mini iPad, iPhones, etc..)
    Would prefer the ability to access this offsite as well
    Backup of the laptop
    Backup of the storage HD
    Ensure we do not lose iPhoto libraries data/files
    Here is what I am thinking—need to know if it will work.
    Purchase two HDs
    Plug them into my base station
    Allocate one HD @2T for storage (additional iPhoto libraries, home movies, iTunes libraries, etc...)
    Partition the second HD @3T to handle two Time Machine backups
    (a) Time Machine of the laptop (up to 1T of backups)
    (b) Time Machine of the first HD (up to 2T of backups) - Is this possible?
    What I need to know is
    Is it possible to partition a HD to Time Machine two backups from different sources—one being a HD?
    If this is not a good solution—what is? I am pulling my hair out trying to figure out how to deal with a lot of data related to iPhoto due to the formatting limitations there.

    While most do not advocate mixing Time Machine backups with other files, I have 3 Time Capsules with files and backups on the same partition and have never had a problem despite doing it for many years. All 3 Time Capsule are set up as NAS devices.
    One Time Capsule holds the Snow Leopard partition backup of two computers. The other two each have a backup of the Mountain Lion partition of two computers. Time Machine is set up to alternate between the devices, which it can now do. On these 2 Time Capsules is a copy of the iTunes Library and a copy of the iPhotos Library, which provides a backup for the two. Every so often I manually copy the new files from the primary iTunes/iPhotos library to the backup on the other Time Capsule.
    If the computer is on, I can access the computer from my iPad and then access the hard drives and the files.
    Hopefully, I have been able to make this clear.

  • I have 2 iCloud accounts. Can I delete one account so I can make use of additional space I purchased for the secondary account? Also iPhoto seems to only connect to the primary account? How do I send files to the secondary account?

    I have 2 iCloud accounts. Can I delete one account so I can make use of additional space I purchased for the secondary account? Also iPhoto seems to only connect to the primary account? How do I send files to the secondary account?

    Both accounts are completely independent from each other. In order to use the space that you have purchased for your secondary account, you must change it to become your primary account. Yes, as you said, services like photo stream only work with the primary account. Unfortunately, there is no comfortable way to just transfer data from one account to another one, but you can do it via a third party application e.g. via Dropbox: e.g. for photos: photos stored with your current primary account > manual transfer to dropbox > after you made your secondary account to the primary account,  transfer the photos back to your new primary account etc.

  • Can i create additional apple id's using the same email address for using multiple products with iCloud?

    can i create additional apple id's using the same email address for using multiple products with iCloud?

    Hi Anne,
    I'm pretty sure different eMail addies are needed for different Apple IDs.

  • How to create additional Line in file based on condition available as part of ZINVOIC02 Idoc segment

    Scenario Details:
    Receiving Zinvoic02 Idoc in PI. Idoc to file translation creates comma separated file with .csv extn
    The logic was kept in such a way that how many E1EDP01 (items) are available in IDoc that many no of records will be created in csv file.
    The file logic for some the fields is as below:
    No of records
    InvNumber
    InvDate
    CusNumber
    LineitemDesc
    Tax1Type
    Tax1%
    for 1st E1EDP01
    E1EDK01-BELNR
    E1EDK03-DATUM
    E1EDK01-PARTN
    Populate when E1EDP04/MSKWZ=O2 or O4 with E1EDP19/KTEXT
    Hardcode when E1EDP04/MSKWZ=O2 or O4
    Sum all E1EDP04 /MSATZ when E1EDP04/MSKWZ=O2 or O4
    for 2nd E1EDP01
    E1EDK01-BELNR
    E1EDK01-DATUM
    E1EDK01-PARTN
    same as above
    same as above
    same as above
    for 3rd E1EDP01
    E1EDK01-BELNR
    E1EDK03-DATUM
    E1EDK01-PARTN
    same as above
    same as above
    same as above
    Additional Line to be created when one or more of E1EDP01 is having E1EDP04/MSKWZ = O3
    same as above
    same as above
    same as above
    Hardcode "REIM for USE TAX"
    Hardcode ""
    Hardcode ""
    Now we have got addition requirement to add a new lineitem when tax code is equal to O3 for any of the E1EDP01.
    Is it possible to create additional lineitem based on condition. If yes, please share what should be the approach.
    How we can create the additional lineitem?
    Currently we are using E1EDP01 to do context handling.
    The target structure is :
    MT_FILE
         INVOICE     0..unbounded
              InvNumber     0..1
              InvDate          0..1
              CusNumber     0..1
              LineitemDesc     0..1
              Tax1Type          0..1
              Tax1%               0..1

    Hello,
    Please add one extra field in the data structure of the target mapping and let its occurrence be 0..unbounded under the root node 'MT_ADP_Invoice'.
    Apply the condition, if tax code MSKWZ (with its context changed to E1EDP01) equalsS to '03', then map it to the newly created target field whose occurrence is 0..unbounded.
    This will then create an additional field which is your requirement.
    The above is one way.
    But if you want to have the same target field name as ADP_File appended for tax field being '03'.
    Then in that case you can you two message mapping for one common operational mapping / interface.
    In the first message mapping you need to have one target data structure created with the source data structure remaining the same as the one shown by you in scrn shot. Now this target data structure will be similar to the source, except that you need to add one more field at the end(name different from other fields) in target (whose occurrence should be 0..unbounded), and it needs to be mapped to E1EDP01 provided the tax code field MSKWZ(its context changed to E1EDP01) equalsS to constant '03'.
    In the second message mapping you need to map the target structure of previous message mapping to the actual required structure. The newly added field should be mapped to ADP_File of your final target structure.
    This will then create the same structure as required.
    Note : Please change the occurence of ADP_File to 0..unbounded.
    Regards,
    Souvik

  • How to create a space on the volume for user in eDirectory ?

    hello, can I create and associate a limit on the volume of data with a Java API ?. I would like to do at the time that the user is created in eDirectory. What would my options?. I need to create a space on the volume and create a folder with the user id. If I can help please.
    Thank you.

    Jquinone wrote:
    > hello, can I create and associate a limit on the volume of data with a
    > Java API ?. I would like to do at the time that the user is created in
    > eDirectory. What would my options?. I need to create a space on the
    > volume and create a folder with the user id. If I can help please.
    You can create a folder with ordinary Java methods. To add a quota, you
    can use Virtual File Services API,
    http://developer.novell.com/wiki/index.php/Vfs. In particular, you may
    find addQuota,
    http://developer.novell.com/document...a/btxm0ri.html,
    and modifyVolumeInfo,
    http://developer.novell.com/document...a/afqd95h.html,
    useful.
    Dmitry

  • I changed from manually manage music to create more space, and lost a LOT of my music from my current Itunes library.  I HAVE to have that music back!  How do I go about getting the missing/lost files back on my library and IPod?

    I changed from manually managing music to create more space on my IPod and lost a lot of the my music since it synched with another library. ( I think off another long gone computer!)  I HAVE to get this music back!  There are songs I can no longer find!  How do I get this "Cannot locate file for this song" music back on my ITunes library and IPod?
    Thanks for any and all help!!

    See this article for more help and information.
    iTunes: Finding lost media and downloads
    B-rock

  • I just saved my iphoto original library to my external hard drive, now how do i create new space on my hard drive and create a new iphoto library

    i just saved my iphoto original library to my external hard drive, now how do i create new space on my hard drive and create a new iphoto library

    Trash the copy of the library you just moved. Then Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
    But do you want to have two iPhoto Libraries? Why not just use the one on the External?

  • Formula that creates additional rows

    Greetings everyone. I am fairly new to Apple numbers. I have a spreadsheet that calculates an investment return for clients year by year based on their age. I need the spreadsheet to go out to the clients age 100. There is an input page that I put in the clients age as well as additional information that it uses to calculate the investment return. It then takes the clients age and starts off the first column (client age) with that value. Each row has about 5 columns with different information being displayed. I am looking for a way for numbers to take the clients age column and automatically continue to create additional rows until it gets to the clients age 100. I would want each additional row to have the same formatting, formulas, and color scheme as the row before it. Is their a formula that would do this or do I need to create some sort of script?
    Thank you,
    Matt S.

    You can put the last row (the totals) in a footer and it will always be there or it can be a regular row that is TRUE so it is not hidden.
    If you make the table 125 years in length and automatically hide the unnecessary rows as I have outlined, you won't have to add rows, subtract rows, or tailor it in any other way for each client. It will tailor itself to the correct length based on the age you specify on the client's input page. And next year, when they are a year older, you can change their age in the client input page and the table will change accordingly.
    Depending on how you handle the formulas within the spreadsheet, you can sum things up the normal way with the SUM function or you can sum them up with SUMIF where the "if" is "if the row is TRUE". In other words, if every row that is FALSE has zeros, you can use SUM; if the rows that are FALSE have nonsensical numbers, you could use SUMIF. Formulas for things like rate of return might take some finessing but they too can be done. Any charts you might have can be made to not show hidden data (it's a checkbox), so they too are not a problem.
    I guess I'm from the school of "if it can be done within Numbers, then do it within Numbers" versus throwing scripts into the mix. It will be more versatile and portable if it does not require a script because a script is a separate entity, not part of the spreadsheet. Also, if you make changes to the spreadsheet, you may have to make corresponding changes to the script. That's just my opinion. It's your call. I'm sure Yvan can set you up with a terrific script.

  • How do I create a space between the songs on the playlist?

    Hi, I have a dance studio, in which we perform at the fair this weekend. I put all the songs that we're dancing to on a playlist, but the songs fade into each other...Is there anyway where I can create a space in between each song.Please Help!!!
    -LaQuette

    i tried this edit>perferences>crossfade playback>deselect,
    but it doesn't work for me. there's no way to save the deselection(e.g., via "save" or "ok"). once i close out of the playback folder, the crossfade playback feature just rechecks itself and comes back on. and even if i keep the feature deslected while songs are playing and don't close out, itunes still inplements the crossfade playback feature. any suggestions?

  • When i use function module to create additive costs using KKPI_BDC_ADD_ON_C

    Hi,
    When i use function module KKPI_BDC_ADD_ON_COSTS_CREATE to create additive costs it shows an error. The error is 'THE OBJECT IS LOCKED BY THE USER SARKARD'  the transaction it uses is CK74 for creating.
    I have also read about KKP4_ADD_ON_COSTS_CREATE. But i dont know the usage of it.. 
    I think it will be helpful if u can clarify with first FM.
    Kindly suggest.
    Thank you.
    Harsha

    Hi Harsha,
    I have a similar requirement, but the issue that I am facing is that I can not find any parameter in the FM - KKPI_BDC_ADD_ON_COSTS_CREATE for Valuation Date which is a mandatory field in CK74. How did you overcome that issue, can you please share ?

Maybe you are looking for