Yosemite will not allow external monitor connection

I have a 2008 MacBook Pro with a DVI port for an external monitor. I use it to connect to a Panasonic LCD projector to watch movies through my computer.  I recently upgraded to Yosemite so I could use some new software, and now my computer won't connect to my projector.  The computer recognizes when I connect the monitor to the DVI port, but does not show it as an available display in the Systems pane.  I've read about all the graphics bugs with Yosemite, is one of those?  Is it possible to use both Yosemite and continue to use my projector?

Hi SG Counselor,
If you're seeing no signal or getting no video on your external display, then I'd like you to follow the steps outlined below.
No video or no signal, image distortion, "snow," or flickering
Check connections
When using an external display be sure to check the following:
If you're using an Apple notebook, confirm the AC power cable or adapter is securely connected to the computer and the cable providing power to the display is also secure. It is always good to have your notebook connected to AC power when an external display is in use.
Confirm display adapters are fully seated in their respective connections and that they are supported models and for the computer and display. Refer to these articles to assist you with adapter compatibility and further configuration information:
Monitor and Display Adapter Table
About Mini DisplayPort to HDMI adapters
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
Thunderbolt ports and displays: Frequently asked questions (FAQ)
Remove all display cable extenders, KVM switches, or other like devices and retest to determine if the issue is resolved.
Try unplugging the video adapter or cable and then plug it back in.
If more than one video adapter is in use (or "daisy-chained"), troubleshoot by using only one adapter.
Example: A mini DisplayPort to DVI adapter connected to a DVI to HDMI adapter is an unsupported configuration because there is a series of adapters in use.
If available, try using a different display and or adapter (or use a different connector by using DVI instead of VGA, for instance).
Reset the system
You can reset the Mac's parameter RAM and SMC.Reset the resolution
Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
Using Closed lid, Extended Desktop, or Mirroring display modes
When using multiple displays, information can be presented in a number of ways. For more information and what modes are supported by your Apple product refer to:
Apple Portables: How to use your computer in closed lid (display closed) mode with an external display
How to use multiple displays with your Mac
Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
Take care,
Alex H.

Similar Messages

  • My itouch will not allow me to connect to my wifi.  It doesn't even let me get onto my wifi settings.  The button is unhighlighted as well so it won't even let me fix it or choose a wifi network!!!!!!

    My itouch will not allow me to connect to my wifi.  It doesn't even let me get onto my wifi settings.  The button is unhighlighted as well therefore it won't even let me fix it or choose a wifi network-any network!!!!!!  So i can't access NOTHING!!!!  Our other new itouch's work fine (im using one right now lol lol) so it isnt my wifi/router....  My itouch is old lol, I've had it for 4 or 5 years and it's cracked up etc...lol lol.  But it still works great, however, it was out of commission for the past 5 months cuz my computer was not working to sync it and it wanted me to "connect to itunes" and i couldnt at the time...(plug it in to sync)....  And now my computer and iTunes are working and the itunes software is updated as well.   So i have synced my itouch and said itouch is working and restored however it will not allow me to access my wifi settings.  The button is unaccessable and unhighlighted as i have stated above already and am in the process of syncing and restoring said itouch again!!!  Which should take another full day or two lol lol omg!!! 
    Please help :)
    I love my old itouch!!! :( and Miss it dearly lol :(
    Ty in advance for anybody's help with this matter.

    My itouch will not allow me to connect to my wifi.  It doesn't even let me get onto my wifi settings.  The button is unhighlighted as well therefore it won't even let me fix it or choose a wifi network-any network!!!!!!  So i can't access NOTHING!!!!  Our other new itouch's work fine (im using one right now lol lol) so it isnt my wifi/router....  My itouch is old lol, I've had it for 4 or 5 years and it's cracked up etc...lol lol.  But it still works great, however, it was out of commission for the past 5 months cuz my computer was not working to sync it and it wanted me to "connect to itunes" and i couldnt at the time...(plug it in to sync)....  And now my computer and iTunes are working and the itunes software is updated as well.   So i have synced my itouch and said itouch is working and restored however it will not allow me to access my wifi settings.  The button is unaccessable and unhighlighted as i have stated above already and am in the process of syncing and restoring said itouch again!!!  Which should take another full day or two lol lol omg!!! 
    Please help :)
    I love my old itouch!!! :( and Miss it dearly lol :(
    Ty in advance for anybody's help with this matter.

  • Recently upgraded Mac OS to 10.5.5 - have an older G4 which is max'd out upgrade-wise - both processor and OS. At present Safari is 3.1.2. Itunes is 9.2.1. Itunes will not allow me to connect to store - says it requires Safari 4.0.3 - however, when I try

    Recently upgraded Mac OS to 10.5.5 - have an older G4 which is max'd out upgrade-wise - both processor and OS. At present Safari is 3.1.2. Itunes is 9.2.1. Itunes will not allow me to connect to store - says it requires Safari 4.0.3 - however, when I try to download Safari 4.0.3 or newer it says it requires an older version of the OS. What to do?

    Update v10.5.5 to v10.5.8
    Download and install the  combo >  Mac OS X 10.5.8 Combo Update
    Then restart your Mac.
    That should update Safari for you to 5.0.6 and that should help with iTunes.
    If necessary, after updating to v10.5.8, you can use the standalone Safari installer here >  Safari 5.0.6 for Leopard

  • My Ipod touch ios version 6.1.3 will not allow me to connect to my wifi, Please help me!!

    My ipod touch ios version 6.1.3 will not allow me to connect to my wifi. I tried rebooting my wifi router, refreshing my ipod, resseting the networks and manually logging into my wifi. Sometimes it will go through for a brief moment, but the wifi connection will ultimately disconnect. Each time i try to connect to my wifi afterwards a small pop up will say "Unable to join the network". Please help. it's really annoying and frustrating.

    Thank you Carolyn Samit, but nothing is working.
    I've restored my ipod both to a backup and back to factory. I know the password is correct,
    the router is the newest version (and it's plugged in and on), my ipod is updated, i've turned my wifi settings on and off, i've turned the ipod off and on. No luck yet. I've been working on it for hours now. About ready to sleep on it...maybe some luck will find me tomorrow...
    Still in need of dire help.

  • My i phone has a passcode onit so it will not allow me to connect to itunes my phone has froze and dosent allow me to type in my passcode what shall i do

    my i phone has a passcode onit so it will not allow me to connect to itunes my phone has froze and dosent allow me to type in my passcode what shall i do?!!!

    Check here http://support.apple.com/kb/HT1808

  • My iPod touch will not allow me to connect to the itunes store when i use the internet but it will if i connect through my laptop

    My iPod touch will not allow me to connect to the itunes store via my wireless internet but it will allow me to when connected through my lap top

    I have already looked on that link and it is of no help at all.
    When i first put credit onto my i pod it worked fine then it kept coming up with that message, i went into the apple store today and it worked straight away and when i first tried to download apps at home it worked fine, then it stopped again and came up with the same message. i know its not the internet connection because i can connect ok to the internet on both the i pod and my laptop.

  • My I4 will not allow me to connect a bluetooth. It keeps giving a message the pair list is full. There are no list available to delete. How do I correct the issue?

    My I4 will not allow me to connect a bluetooth. It keeps giving a message the pair list is full. There are no list available to delete. How do I correct the issue?

    Check this article: iOS: Third-party Bluetooth headsets, headphones, and keyboards
    Unpairing a Bluetooth accessory from an iOS device
    If you've paired your iOS device with a Bluetooth accessory and no longer wish to use that accessory, you may unpair it. If you wish to leave the device paired, but route calls through a second, paired device, turn off the first device and then turn on the second device. Then in Settings > General > Bluetooth, tap on the device you wish to use.
    From the Home screen choose Settings > General > Bluetooth. If Bluetooth isn't on, turn it on.
    Choose a device and tap Unpair.
    Until you pair the Bluetooth accessory again, your iOS device won't route information through it.
    * Find information on which iOS versions and devices support which Bluetooth profiles. Not all Bluetooth stereo headphones include a mic. Only those with a mic and that support handsfree profile (HFP 1.5) can be used to make and receive calls.

  • My imac will not detect external monitor after recent update. Is there a way to fix this?

    I have a VGA monitor plugged in to my imac using the VGA adapter to the mini-DVI.  All was working well.  Since I updated over the weekend, the computer will not detect the monitor.
    Any ideas how to fix this?

    Pcantin wrote:
    I have tried another VGA monitor and that failed as well.  Since you don't think the update was the cause, it may be that the adapter I am using decided to call it quits.  I will see if I can find another and test that out.
    I will look into the external drive idea as well.
    Thanks for your help on this.
    I didn't think about the adaptor, but you should at least visually inspect both the adaptor and the cable at both ends. If one or more pins got bent even slightly the connection might fail. The cables can also fail internally. Replacing the adaptor and cable may be the quickest thing to do initially. If you want to try to save money, first replace the adaptor, and if the problem persists, then go replace the cable (or vice versa).

  • Problem: MBP Is not allowing external monitor Widescreen resolutions.

    I am using a 27" LCD HD TV (Yes, TV, not monitor) DVI->DVI and the MBP will not allow me to use a widescreen resolution on my external monitor.
    Yes, I assure you, it is Widescreen. The native resolution is 1280x720.
    Anyone have a clue how I can fix this? Running a stretched 4:3 screen ***** HARD. This was my old windows PC monitor and I never had this issue before.

    Hi,
    I've got the same problem. Tried SwitchResX with not much success. I'm using as second screen a Benq w100 projector. When I force resolutions like 854x480 at about 60Hz, the projector won't recognise it, which makes sense since the input is not supported as such from a PC.
    I think the clue would be sending a HDTV/HDMI signal through the DVI cable. Has anybody managed to do this with the ATI Radeon X1600 that comes with the MBP?
    Gabriel

  • ITunes Music Store will not allow me to connect

    I have been trying to connect to the music store since I got my iPod last week. I have been using iTunes for a long time and I have always been able to connect to the store. When I installed the new software that came with my iTunes the store stopped working. I have stopped all anti virus, firewalls, security and anything else that has been recommended in other posts. I opened windows/system32/drivers and that was not the problem. I contacted apple and they gave me troubleshooting problems that didn't work, as I've tried them a million times. I also pinged phobos.apple.com and it says connection timed out 4 times and said information lost. So I don't know what else to do. I have windows xp with sevice pack 2 (which had been ruled out as the problem, I gurantee it), norton security (not the problem, I've disabled it and iTunes is allowed, nor is windows firewall the problem) and I can connect to the internet. The specific error message I am getting is iTunes cannot connect to the music store, network connection has been reset. make sure your network connections are active and try again. I just got a giftcard and I want to use it....any suggestions that aren't already all over every thread in the discussions?
    Thanks a lot!

    I would first check your firewall settings, as well as your security software to make sure they are not blocking the Store connection.

  • My iPhone 4s will not allow me to connect to iTunes

    . It says "The iPhone "iPhone" cannot be used because it requires iTunes version 10.5 or later." I've already downloaded the 10.6 and restarted the laptop yet the same thing appears.

    If you are running windows try uninstalling iTunes and all of its components as by following one of these guides: Windows XP or Windows Vista/7, then reinstall iTunes.  You must follow this guide exactly or it will not be successful.  Note: uninstalling iTunes will only remove the application; it will not touch your iTunes library or data.

  • Itunes will not allow me to connect

    I can easily connect to the itunes store but whenever i try to sign in on my account it just never loads! I ran diagnostics and it says secure link to itunes failed. I have tried everything including enabling itunes through my firewall, changing proxy setting and SSL and TLS. I just dont know what else do to!! Bought an ipod touch the other day and i really need to get on to my account to download and buy apps!
    Here are my network diagnostics:
    Microsoft Windows Vista Home Basic Edition Service Pack 1 (Build 6001)
    PACKARD BELL BV EasyNote MH36
    iTunes 9.0.2.25
    QuickTime 7.6.4
    FairPlay 1.5.23
    Apple Application Support 1.0.1
    iPod Updater Library 9.0d11
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 2.6.0.32
    Apple Mobile Device Driver 1.45.0.0
    Bonjour 1.0.6.2 (118.5)
    iTunes Serial Number E9893460D6CBE07C
    Current user is not an administrator.
    The current local date and time is 2010-01-18 18:06:32.
    iTunes is not running in safe mode.
    Video Display Information
    Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
    Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
    ** External Plug-ins Information **
    No external plug-ins installed.
    iPodService 9.0.2.25 is currently running.
    iTunesHelper 9.0.2.25 is currently running.
    Apple Mobile Device service 2.50.39.0 is currently running.
    ** Network Connectivity Tests **
    Network Adapter Information
    Adapter Name: {0AB29B54-B5AF-4818-924E-0FFB2467D3FA}
    Description: Realtek RTL8187B Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter
    IP Address: 192.168.0.3
    Subnet Mask: 255.255.255.0
    Default Gateway: 192.168.0.1
    DHCP Enabled: Yes
    DHCP Server: 192.168.0.1
    Lease Obtained: Mon Jan 18 14:43:48 2010
    Lease Expires: Thu Jan 21 14:43:48 2010
    DNS Servers: 192.168.0.1
    192.168.0.1
    Adapter Name: {78C32CEE-3158-4247-9C40-69FA2CFD1ECE}
    Description: Realtek RTL8102E Family PCI-E Fast Ethernet NIC (NDIS 6.0)
    IP Address: 0.0.0.0
    Subnet Mask: 0.0.0.0
    Default Gateway: 0.0.0.0
    DHCP Enabled: Yes
    DHCP Server:
    Lease Obtained: Thu Jan 01 00:00:00 1970
    Lease Expires: Thu Jan 01 00:00:00 1970
    DNS Servers:
    Active Connection: LAN Connection
    Connected: Yes
    Online: Yes
    Using Modem: No
    Using LAN: Yes
    Using Proxy: No
    SSL 3.0 Support: Enabled
    TLS 1.0 Support: Enabled
    Firewall Information
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple website was successful.
    Connection attempt to iTunes Store was successful.
    Secure connection attempt to iTunes Store was unsuccessful.
    The network connection timed out.
    Secure connection attempt to iPhone activation server unsuccessful.
    The network connection timed out.
    Last successful store access was 2010-01-18 17:48:54.
    Any ideass?!!!!

    I can't connect to the itunes store either, although I can sign into my account using itunes and do other things. On the itunes store, all I see is a blank white page.
    I am using IOLO AVS. I have disabled it, shut the program down completely, and I still can't connect to the itunes store. Any ideas? I'm also using Vista, but the Home Premium edition.

  • I forgot my ipad password and itunes will not allow me to connect so I can restore it... What do I do?

    PLEASE HELP!

    Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

  • HT1212 my itunes on my computer will not allow me to connect my ipod to this computer so what should i do?

    how do i whipe out my ipod 4 generation

    Maybe:
    iOS: Device not recognized in iTunes for Mac OS X
    or
    iOS: Device not recognized in iTunes for Windows
    or maybe:
    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • HT1212 i have a problem, my iphone is disabled and i can not get into it. the power button does not work and the computer i used before i do not have. icloud was not set up on it either. And it will not allow me to connect to my itunes. So what can i do t

    i have read ur forgotten password or device disabled after entering wrong password. iphone is desabled dont have computer i conected it to before and power button is broke so how can i get back into my iphone?

    You will have to restore the phone and set up as New. See: http://support.apple.com/kb/HT1212. The part you need is near the bottom, "If you have never synced your device with iTunes...". You will lose any content that is not backed up in iCloud.

Maybe you are looking for