You are not authorized to make changes

When I try to do in change mode for the
screen 0220 (Modified/Active), I am getting following error message:-
========================
START OF ERROR MESSAGE:
=======================
You are not authorized to make changes
Message no. 37202
Diagnosis
You have no authorization for the authorization object 'S_DEVELOP',
which would allow you to change the screen concerned.
There is also a second possibility:
You want to edit a modified SAP screen in a customer system after an
upgrate (SAP transport). The screen remains locked for editing until
the new SAP version and the customer version have been aligned
(Transaction SPAU).
System Response
Authorizations are assigned to users in profiles. Profiles are stored
in the user master record.
Procedure
Comsult your system administrator.
=======================
END OF ERROR MESSAGE:
=======================
For your reference, when i try to open another screen 0100 (Active), i
am able to modify.
Kindly solve this issue to proceed further.
With Thanks & Regards
Bhushan

Hello,
Thanks for your information.
The Said Screen 0220 has been modifed earlier. But now, duing Pach Apply of SAP_APPL SP15, I have skipped the set to original for the said screen. Now I have done that using SPAU and I am able to modify the said screen.
With Regards
Bhushan

Similar Messages

You are not authorized to make purchases of this InApp in Sandbox at this time

Hello,
Our app is experiencing an unusual bug.
Some users are relating that when trying to do an InApp purchase of our service they are seeing a pop-up with the following message:
We can reproduce this behavior in some test devices we have. We tested on iPhone 5, 5s and 6 (the ones we have) with iOS 8.1, 8.0 and 7.1.
But it is not happen every time. On another devices we tested too, we could purchase with no problems. Also, our revenue on iTunes Connect continues to increase and we can check on our database purchases from the latest zoo version.
Even though the latest version of our app was released on February 13th, this behavior started to happen yesterday (Feb 25th).
The message is showing on the version from App Store with normal Apple IDs (no Sandbox IDs).
Has anyone had this problem or know a solution?

Hello,
Thanks for your information.
The Said Screen 0220 has been modifed earlier. But now, duing Pach Apply of SAP_APPL SP15, I have skipped the set to original for the said screen. Now I have done that using SPAU and I am able to modify the said screen.
With Regards
Bhushan

You are not authorized to change the sales employee

Hi everyone ,
when I add an new bussiness partner not with the default sales employee ,I can't finish adding except loging on the system using manager or superuser before. the system tells that "You are not authorized to change the sales employee". This problem had been raised by someone else already,But It still confused me .I have explored the problem in b1 system and has got these results like following:
first ,there are three places where we can set default Salse mployee.
           Path1     Administation/Setup/General/Sales Employees
        or Path2   Human Resources/Employee Master Data/Sales Employee
        or   Path3 Administation/Setup/General/Users/Defaults/New/Defaults/Sales Employee
If you add a new BP , the default Sales Employee will get the value from Path3 .
If it is empty from Path3 ,it will get the value from Path2.
If it is also empty from Path2,then it will get the value from Path1.
There is Only one conditon that In Employee Master Data ,the employee is related with User and Sales Employee.
My question is that since I connected employee with User I can't change the sales employee when adding a new BP.
Another question is that since I connnected sales employee(Mike) with employee(Jone) I can't select the sales employee (Mike) as a sales employee when adding a new BP using other user loging on the system.
There Is no problem if I connect no employee with User.But If I do so ,How Can I do the Data Ownership Authorization.
Edited by: Li Mishan on Apr 17, 2008 9:40 AM
Edited by: Susanne Klemm on May 7, 2008 2:00 PM
Edited by: Philip Eller on May 21, 2008 9:02 AM

I forget to say that I had already give the user all Authorizations.I have copy the authorization from manager.
One thing I am sure that :
If you connet the sales employee with one employee,that means that sales employee can be only used by the user connected to the employee at the same time.others can't use it.
If you connet the user with employee,that means ,when log on the system with the user,you can only use the sales employee that you connected with employee at the same time.you can't use others
Edited by: Li Mishan on Apr 17, 2008 10:55 AM

"You are not authorized to change users in user group XY"

Hello,
I ran a report. Within that report, a BAPI is called. It's name is user_change.
That BAPI enables you to change user details like passwords and so on...
When I tried to change the user's password, an error message occured.
"You are not authorized to change users in user group XY"
The user belongs to the group XY.
After an unsuccessful pwd change, there is no SU53 file!
So how could I solve that?
Could I explicitly define for which user groups, passwords can be changed?
Any other ideas?
Thanks a lot in advance,
holger

Hi Holger,
May be they might have restricted to change password. See <a href="http://www.sap-basis-abap.com/bc/restrict-role-to-unlock-lock-change-password.htm">this</a> for more details.

You are not authorized to change data in sales area

Hi,
I started getting a BDOC error stating "You are not authorized to change data in sales area O 5000022/01" This is preventing the customer from replication into CRM from R/3. Any clues on how to address the issue?
Thanks,
Stephen Brewer

Thanks Robert,
I originally went that route but the BDOC error message give no indication of what account "You" refers too. Guess I will try and track it down on the R/3 side but I find it surprising that security is that granular since this is a middleware function. I would think authorization to manage the customer data in R/3 would be enough. Master Data folks who maintain data in R/3 side all have same role in CRM as well. Thanks for the lead, I will get back.
Stephen

You are not authorized to execute this application in SAP E-Recruit

Hi,
We are getting the below error while going to recruitment page for recruiter:
"You are not authorized to execute this application"
At the same time when we check in SLG1, we get the below errors:
No candidate could be found for US E0023127
The error occurred in program CL_HRRCF_CANDIDATE============CM003 line 361
Apart from this we are not getting any dumps/traces in ST22/ST05/ST01.
When we encountered this error for the first time, we executed the report RCF_CREATE_USER in SE38 and the problem was resolved.
We got the error again 2 days back, after that also it got automatically resolved. But, now we are getting this error continuously.
We also tried re-executing the report RCF_CREATE_USER and HRALXSYNC but no use.
The service user (for recruiter) is a reference user from RCF_CAND_INT.
We have also tried giving different roles and authorizations to the user.
SAP_ERC_RECRUITER_CI_4
SAP_RCF_RECRUITER
SAP_ERC_REC_ADMIN_CI_4
SAP_ALL
We are in ECC 6 EHP 6 and we have a standalone EREC system with ERECRUIT 617 SP3.
We are stuck at this point in our EREC project.
Kindly provide your valuable suggestions for this issue.
Thanks in advance!
Regards,
Khushboo

Hello Khushboo,
the message you are getting is a bit misleading as it is the standard behavior of the quick search if the user you are logged in as recruiter does not have a candidate assigned. So the message in SLG1 points into the correct direction.
I am not sure what you are meaning by "the service user (for recruiter)". Although table T77RCF_ROLE allows to specify a reference user for all roles in eRec only the entries for internal and external candidates are actually used. So the authorization assignment for the recruiter specific roles has always to be done directy for each user. A reference user could be overwritten / reset to RCF_CAND_INT by the ALE.
What bothers me a bit is the user name and that you mention RCF_CREATE_USER and HRALXSYNC at the same time. This might be the reason for your issue. Looks like you created a candidate for a user using RCF_CREATE_USER which is later transferred in the ALE from HR Core to eRec. This was not a good idea. RCF_CREATE_USER is only for creating project users when the HR core to eRec and for special users who need a candidate while do not have an employee id in HR core (e.g. WF-BATCH). This is why I always recommend to use non-production user Ids for everyone during project phase. Its been quite a time some of my projects did otherwise and I remember a similar issue with one of the customer admins. Everytime data for the user / employee was send in ALE the candidate / user was messed up.
Getting this fixed was quite troublesome. In the end we had to dump the original candidate. We deleted all records between candidate object, central person, business partner and person object in HRP1001. By that time the customer was still on the old ALE version so today I would also delete all entries in HRP558X infotype tables for the employee. Then I would first try to finger the employee id (e.g. change the name, save, directly change it back, save again ) so it is transferred during the nightly processing of the change pointers and put in the IDoc. If this is not working I would try to transfer it again using PFAL.
Kind Regards
Roman

BAPI_NETWORK_MAINTAIN for UPDATE ACTIVITY-CN 307-You are not authorized to

Hi all,
sorry for disturb,
I have a problem and I don't understand why....
I use BAPI_NETWORK_MAINTAIN with simple code.
I have tried with SE37 with the same values and it correctly update the activity. without error messages.
but with the same values in the program returns me an error message and it doesn't update the data:
E CN 307 You are not authorized to change activity or element S11021201 0108
I have a USER with SAPALL.....
DATA: i_method_project LIKE bapi_method_project         OCCURS 0 WITH HEADER LINE.
DATA: i_activity               LIKE bapi_network_activity       OCCURS 0 WITH HEADER LINE.
DATA: i_activity_update LIKE bapi_network_activity_up OCCURS 0 WITH HEADER LINE.
i_method_project-refnumber                     = 000001.
i_method_project-objecttype                     = 'NETWORKACTIVITY'.
i_method_project-method                          = 'UPDATE'.
i_method_project-objectkey                       = 'S110202010108'.
APPEND i_method_project. CLEAR: i_method_project.
i_method_project-method                          = 'SAVE'.
APPEND i_method_project. CLEAR: i_method_project.
i_activity-network                                     = 'S11020201'.
i_activity_update-network                        = 'X'.
i_activity-activity                                       = '0108'.
i_activity_update-activity                          = 'X'.
i_activity-control_key                                = 'PS01'.
i_activity_update-control_key                   = 'X'.
i_activity-duration_normal                         = 8,5.
i_activity_update-duration_normal            = 'X'.
APPEND i_activity. CLEAR: i_activity.
CALL FUNCTION 'BAPI_NETWORK_MAINTAIN'
    IMPORTING
      return                                 = return
    TABLES
      i_method_project                = i_method_project
      i_activity                             = i_activity
      i_activity_update                = i_activity_update
      e_message_table               = e_message_table.
thx in advance all
Regards
Marco Echino.
Edited by: Marco Echino on Jun 22, 2011 5:04 PM

Hello Marco,
                    To get more details you need to debub the both options as in the logic SAP is calling another report "R_BAPI_NETWORK_MAINTAIN" using submit statement inside the FM "BAPI_NETWORK_MAINTAIN".
And also befor the submit statement they gad used the EXPORT statement to save the data to the SAP memory.
Inside the Report BAPI_NETWORK_MAINTAIN" SAP logic is calling the FM "2002_NETWORK_MAINTAIN" for doing the update.
So if the Export memory content gets changed due to another execution then the returm value may get changed and end up with conflicts.
So better you need to debub the both scenarios (SE37 & from program call).
You can knock out the problem you are facing.
Hope this answers your question.
Thanks,
Greetson

You are not authorized to read entries in the cash journal

Error while trying to access Cash journal " You are not authorized to read entries in the cash journal ".

Hi Holger,
May be they might have restricted to change password. See <a href="http://www.sap-basis-abap.com/bc/restrict-role-to-unlock-lock-change-password.htm">this</a> for more details.

You are not authorized to logon to the target system error code1(in SM58)

Hi Basis Gurus,
In my test system Idocs are in error status.
When I check tRFC monitering in SM58, there are several Idocs are strucked.
Status Text: You are not authorized to logon to the target system (error code 1).
Recently we have refreshed our test system with production data.
Before system refresh it was normal.
The RFC connection is also working fine.
Please suggest the solution as I'm struck in this issue.
I'm a Basis Guy.
Thanks & Regards,
Ravi.

Hi,
Change the RFC user password in target system however there are 2 tests to analyse from SM59 :
1) RFC Connection test
2) Authorization Test
And i guess you have only tested the 1st one from the RFC(SM59) check whether you can succeed with option 2 if not then you may need to change the password.
Thanks,
Salim

When I try to launch terminal, i get an error "You are not authorized to run this applicationThe administrator has set your shell to an illegal value."

When I try to launch terminal, i get an error "You are not authorized to run this applicationThe administrator has set your shell to an illegal value."

If you'd asked a question in your original post it might have solicited more pertinent responses. As it is, you were stating a fact. No one knew whether you considered that fact a problem, or what you were hoping to gain by doing so.
The simple addition of 'can anyone help me fix this so I can run Terminal' would have counted for a lot.
As it is, your solution is likely to require the Terminal, so you're going to need to fix that one way or another. The simplest would be to create a new admin account (System Preferences -> Users & Groups) then log in using that account.
Then try and launch the terminal. If that works the problem is specific to your original account and can likely be fixed via some command-line tweaking. I'd start with:
dscl . read /Users/<username>
(where <username> is the short name of the account having a problem). This will show the records in the directory data for your account, one of which will be UserShell. Chances are that value is invalid, or missing, and can be corrected via:
sudo dscl . -change /Users/<username> UserShell <currentValue> /bin/bash
(where <currentValue) is the current setting for UserShell) which will change the user's shell to /bin/bash (the default).
Of course, you might already know this and already tried, but since you didn't say so in your original post it's worth checking.

ITunes Radio: We could not complete your iTunes Store request. You are not authorized to access the requested resource.

I can't get iTunes Radio to work. I get this error message, even when I'm signed in to iTunes:
"We could not complete your iTunes Store request. You are not authorized to access the requested resource. There was an error in the iTunes Store. Please try again later."
What the hey?
Anyone?
thanks!
PS: I'm running 10.8.5 but for some reason this website won't let me display that and keeps changing it to 10.8.2.

Relaunched iTunes a few times, signed out, signed in, and it's finally working now. Good grief. But all's well.

"You are not authorized to edit the chosen object" in LWE

Hello gurus,
I want to edit the standard HTML content that is delivered with Life and work events. Before editing this, i want to copy the ESS HTML content package to a custom folder and then edit and modify as per my requirements. i navigated to Life an work events - US --> HTML content --> Content Package --> ESS HTML Content Package and clicked on Open. I am getting the error "You are not authorized to edit the chosen object".
How do I access this content without any error? Do I need any specific roles to be able to access this content? i need to access this content to be able to copy and paste it to a custom folder.
Also, when I tried copying at the ESS HTML content Package level and then pasting it into a custom folder, i get a popup with all empty rows and columns and there are two buttons OK and CANCEL.
How do I copy this ESS HTML content package to a custom location?
please suggest .
An update: Since I could not open/edit the standard ess html content package, I created my own HTML files from scratch and created a content package and uploaded my html files and folders into the custom content package. Now, I want one of the pages that I created to be displayed as the start page of one of my life and work events.
How do I achieve this? What else is needed to call these html pages from the event?
Please suggest and any help is really appreciated.
Thanks,
Maria Kutty Somori.....
Edited by: MariaKutty on Jun 24, 2011 1:01 AM
Edited by: MariaKutty on Jun 24, 2011 1:05 AM

Hello Maria,
I too tried earlier for copying these HTML content and paste them in my custom folder and then modify them....
But I too faced the similar error as of yours.
I dont' know the reason why this happens....I guess SAP does not allow you to modify there content.
Nyways, there is always a workaround solution....
You are spot on when you say...You are creating new HTML files from scratch.....but you dont' need to create from scratch !!
You can still get these files.
1. Check Directory Structure : Navigate to Life and work events - US folder in GP design time -> HTML Content -> Content Package -> ESS HTML Content Package and click on "Open" then click on content tab..
Here you can view all the content files supplied....additionally please note that there are two folders "CSS" and "Images".
If you wish to create your own content from modification to SAP supplied content...then make sure in your own package these folders are also with similar directory structure.
2. Come out of gallery and as an end user Open your life and work events page that you wish to modify.
For e.g. ESS -> Life and Work events -> My First Days -> New Hire Checklist.
3. Right click on HTML page and click on Properties.
4. Copy the Address/URL of page.
It will be something like :
http://Host:Port/gpcore/ctpkg/094BABAA643911E091070000014B8BFA/NewHireCheckList.html
5. Access above URL directly from Browser (In new window) and refresh that opened page. Check that all the content is visible and in correct font and format.
6. Click on "Page" -> Save As...from your browser tool bar.
7. From "Save as type" select HTML complete....
and save the page.
8. As a result you will get an HTML file and a folder.
Inside the folder there will be your images and CSS....Now you know how to make your own content.......
Very Important : Please note that directory structure of your CSS images and HTML must be similar to what you saw in point 1.
And you can easily modify your content...accordingly...
Now the second part of your question :
"Now, I want one of the pages that I created to be displayed as the start page of one of my life and work events. "
I hope you refer to something that is given by SAP in the form of " ESS -> Life and Work events -> My First Days -> New Hire Checklist"..
As you can see "New hire checklist" is the First link available under My first days...thus by default it gets displayed when user clicks on "My first days"....
Is this that you want to mimic ?
Well for that your process in GP design time must look like this :
http://img594.imageshack.us/img594/7/imageqw.png
For eg. Create a new callable object with name "New Hire Checklist" of type : "Content package"..
Wizard will help you with the rest.
Revert back if you face any issues.

You are not authorized to create users in group

HI all,when I want to creat user or change a user information in EP7.0,I get the message:
An error occurred in the persistence. The original and possible not translatet message was: "BAPI_USER_CREATE1@BI7CLNT001: ID=01, NUMBER=491, MESSAGE=You are not authorized to create users in group". Contact your system administrator.
How I can do?

You have no proper authorizations to do this. please follow this document for more details.
<a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/668e6629-0701-0010-7ca0-994cb7dec5a3">SAP Identity Management APIs</a>
REgards,
NItin

You are not authorized to display the case component, when using copy

I copied the standard UDM_SPS_CASE_RECORD and created a Z version with no changes, in addition also copied the standard Case Record model with no changes. I have entered my new case record model into my new element and tied both the to case type. When trying to create a case get a message "You are not authorized to display the case component"
SU53 looks good, and BASIS did a Trace and did not see anything.
When I change the configuration back to use the standard no issues and case is created. Anybody know what the issue might be?
Thanks

dear friend,
when you get this error on screen type /NSU53 , hit Enter and get a new screenshot
if you see the message ""The last authorization check was successful" that means nothing to do with Basis team, it could be a custom message - talk to abaper ;
but if you see some objects there (Authorization check failed) - please pass to security or basis guys
ask / try another user which hasn'rt such error and comare the roles you and he/she has - try to find out the difference
good luck!

You are not authorized to display the data transfer process

Dear Experts,
Good Morning!
I want to that I am getting one Message no. RSM906:"You are not authorized to display the data transfer process
".What does it mean .I want to load the data in the 0SD_C03 cube ,can able to load upto PSA but unable to create the DTP.IS this because of this messege of authorization or some other reason ,Request you to please suggest me for this issue ,thanks in advance .

Hi,
You may not have authorisation for S&D cubes, so i feel it is an authorisation issue, kindly take one of your colleagues id to check this, if it is working for them, then i think you have to add those to roles to your ID..
Still there is a option to override this, but you have debug it once, and change the authorisation code(sy-subrc) value, and please dont try this if you are not familiar at ABAP, and this is not adviceable if it is an authorisation issue as there will be logs recorded for all the things you are doing and oreover each time when u click on DTP you have debug it to change the authorisation
code..
Note: If it is QA or Dev system you can try debugging it, but if it is production system then i think u have to use an alternate ID...
Regards,
Nanda.S

You are not authorized to make changes

Similar Messages

Maybe you are looking for