You can not post to asset xyz ( investment support measure) ??

Hi Guru's,
I am trying to post some spending reclassed to an already capitalized asset. So in order to do this I have reactivated the project, resettled the spending to the asset and now I am trying to finalize the settlement to the asset by using tcode: CJIC... but keep getting this a hard error message:
You can not post to asset xyz ( investment support measure) .....
Any idea how I can resolve this ?
Please help !! Thank You
Best Regards,
Yasmeen

hi,
it would be better if you write error message number in thread.
hope you are using im module. if so check the system stastus of appr.request and try to settle to auc.
check and do revert.
regards,

Similar Messages

My iTunes in MacBook is not working i do received error You can not post a blank message. Please type your message and try again. saying I don't have permission to media folder could help me

You can not post a blank message. Please type your message and try again.

some additional info about the clean install, I did not Migrate any data over from a Time Machine, I started fresh. Perhaps this could be my issue. Do I need to Migrate over the User account in order to have access to my old data?

Interface   BAPI can not post to asset

Dear all
        i met a weird problem.
        we use a interface( bapi) to make the SAP document, but when we post document for the asset ,
only FI document generated. the Asset document not generated , the value was not posted to the asset.
        if anybody has met this kind of problem?   help .......help.......Thanks a lot !

Dear
      yes ,we have fill in the transaction type (100 - acquisiton) , and the FI document has been generated
all the fields are right ! the only problem is the asset value not updated ,it's that the asset document not generated!
and it 's not for a particular company code ,for all the company code!
Best Regards!:)
Sara xie

You cannot post to asset 150000 0 (investment support measure)

Hello All,
I am getting Error while doing KO02 Order settlement
I selected Cat - FXA and select asset (asset under construction)
When I am trying to save
You cannot post to asset 150000 0 (investment support measure)
with Message Number Message no. AA311
Regards,
Kiran.

Hi,
You cannot directly include settlement rule for AUC. This is automatically included after settling.
1. Create an Internal Order through KO01 and from that Extras --> Create AUC.
2. Then you post expenses to AUC.
3. You settle the IO through KO88. When you settle the internal order automatically it would be settled to AUC which is in IO.
4. Check the IO you can see the settlement rule with AUC line item
5. Now select FXA rule and select the final asset.
This is will solve your problem and this is the procedure.
Thanks & Regards,
Giridhar Reddy

Asset You can only post in new year after closing the previous year

Hi Experts,
I am getting below error while running the depriciation:
You can only post in new year after closing the previous year.
Message no. AA687
Diagnosis
You want to post in a new fiscal year. However, a posting must have been made in the last period in the previous fiscal year before you can do this.
Procedure
Post to the last period in the previous year first.
Note : I closed FY09, even though there were no assets in it at the time. The first asset was capitalized on 12/29/09 (clearly in FY10). I tried closing FY09 again and got the messege No year-end close is necessary for company code XXXX .
Could you please any one help me on this.
Thanks In Adwance
Regards,
Saritha.

Hi Saritha,
Please check the following settings:
o Is there one ore more years since the last depr. run?
Solution: in this case an entry must be made into the table TABA.
                  Note 144441 gives a solution to make a "Dummy-entry".
o If there was never a depreciation run, the there must be 000/0000 in
TABA and T093D.
Solution: please take the report from the note Note 144441
                  and put the values 000/0000 in this fields.
o Do you have a non-calendar fiscal year (e.g. 2009/10)? In this case
    you should have in the field T093D-AFBLG the year 2010.
    Solution: Correction with note 26073
regards Bernhard

Message# AA649 In area 01, you can only post manual dep. up to the amount

hi friends
when i do the transaction in ABAA ,it went error said that In area 01, you can only post manual dep. up to the amount 0
i had select allowed all value in unplan depreciation ,and why the detail message said the The asset does not have any net book value; in this case, you should check the transaction as described above.
Asset affected: 000025100073-0000
Diagnosis
This posting cannot be performed, since manual depreciation can only be posted in the amount of            0.00 in area 01.
Procedure
Check the transaction type entered, or change the posting amount.
Caution: If the amount concerned is 0, this could be the result of two situations:
1. The asset does not have any net book value; in this case, you should check the transaction as described above.
2. The asset has a depreciation key with automatic depreciation calculation. However, if you want to include depreciation in addition to the automatically calculated depreciation, it has to be unplanned depreciation.
Otherwise, you should use a depreciation key that does not calculate automatic depreciation (SAP-supplied key: MANU).
thanks

Hi,
1) Transaction type 640 normally is a previous year transaction type. My suggestion is that you have no values from previous years.
You use the transaction type 640.
Please check if it works with transaction type 650.
Check the setting from the transaction types:
Table TABW (SE16)
=================
Trans. Type........Trans.Type grp.
640.........................64
650.........................65
Table TABWG
==============
Trans.Type grp. ...........Curr.-yr.acq. transaction
64
65..................................................X
The difference between this 2 transaction types 640 and 650 is the sign TABWG-XZUGNE (Current-year acquisition transaction) in the transaction type group.
2. Please see the text passage from 13221 point 2:
2. An incorrect depreciation key is used. Manual depreciation and
    automatic calculation of the same depreciation type are mutually
    exclusive.
    If another depreciation must be set in addition to the automatically
    calculated depreciation, there has probably been an unplanned
    depreciation.
    If the asset should have only manual depreciation, please use
    another depreciation key, for example, 'MANU'.     ..."
regards Bernhard

How can send emails over a eircom account i read some were this not possible is ther any fix for this as i am thinking of buying a ipad Air not much use if you can not send emails or answer them thanks

I believe you can only look a your emails if you have a eircom email account and you can not send or answer them with a eircom account if this is so can anybody tell me if there is a fix for this problem or would i better off just useing another email account that will work with ipad Reason i ask is i am just about to buy a ipad air and if this is not possible to use my email address to send emails from my ipad i would be better off with my laptop Thanks Napster

There are lot's of posts via a google search and it seems you certainly can set up your eircom account on your mailbox on iPad. Read this thread link:
https://discussions.apple.com/thread/4022610?tstart=0

It Gives me no reason this message often the first to enter my pass:" When you can not buy Equilibrium - Leonardo da Vinci's Balance Puzzle " and 27other elements. Please try again later". How can I remove this annoyng message? Maybe it's a Virus?

It Gives me no reason this message often the first to enter my pass:" When you can not buy Equilibrium - Leonardo da Vinci's Balance Puzzle " and 27other elements. Please try again later". How can I remove this annoyng message? Maybe it's a Virus?

The old rule of thumb was to keep 10-12 GB free. Any lower than that and you will start to have trouble. I was very close to that for a long time and never had any complaints. Now, Lion "encourages" 20% free space (on my newer 250 GB drive) so I try to keep it with more than 50 GB free.
Do you still have the original memory in that machine too? The metal plate you have to remove in the battery compartment also provides access to the RAM. Your machine will take 2 GB of RAM, possibly 3. You definitely want to max that out too.
Regardless, you definitely need a new hard drive. When Apple switched to PC components, they had to take a quality hit. These 2.5" notebook hard drives are not very reliable. I'm surprised your hard drive hasn't died by now. I usually get a new hard drive with every major OS upgrade. A $ 50 investment every couple of years is no big deal.
Unfortunately, you (and I) suffer from being an early adopter in 2006. Those 32-bit machines only accept 2 GB RAM (maybe 3) and are only 32-bit so they can't be upgraded to Lion. Because of this limitation, you won't see as dramatic an improvement as you would with a 2007 machine. If you run more than a couple of applications, your hard drive is always going to have to be doing some VM work. My 2006 machine has even lost its bluetooth. I gave it to my brother. My very similar 2007 Macbook is still running great.
So, you must get a new hard drive because your old one is likely on death's door. If you don't have at least 2 GB - get it. If you can't afford a new machine, you might want to consider an SSD. That might help mitigate your RAM limitations. You can spend from $ 100 to $ 350 and get a dramatic speed improvement.

Depreciation run problem."You can only post in new year after closing the"

Hi,
We are implementing Asset accounting to one of our co code.New Assets were created in Jan and when I tried to Post depreciation for Jan, I get an error log that says "You can only post in new year after closing the previous year."
When i double click on error message.
Diagnosis
You want to post in a new fiscal year. However, a posting must have been made in the last period in the previous fiscal year before you can do this.
Procedure
Post to the last period in the previous year first.
So I went ahead and opened the previous year, posted the depreciation, closed the year and tried to post Period 1 again, but still get the same error.
Why do I need to post the previous period if I just created the assets in this period?
I Have completed AJRW, AJAB also.
I think it may be a problem with Table. Please suggest me.
Thank you

Hi,
Please check the following :-
1. Check the Last Closed year in your Asset Accounting.
2. Check the Last Depreciation Posted in Your Asset Accounting.
These 2 menus are available in "Data Transfer in Fixed Asset Accounting".
revert back to me for further actions,
regards
N.Kumar

I downloaded the new version of iTunes 11.0.3 and now I get this error when I go to update Apps...any solutions???? You can not update this software since you have not owned the major version of this software.

You can not update this software since you have not owned the major version of this software.
any soultions???

Same here. Just becoming a nightmare. Updated iTunes and now can't update apps it itself is showing as available updates. Count me in on the latest "You can not update this software since you have not owned the major version of this software." bug.
Next I have to post about a new problem in iPhoto on a new thread.... it lost the "link" between some but not all photos I have in the library and what it itself posted to FaceBook a few hours ago...
Incredibly frustrating.
Imran

Can not post comment to a comment at FB

When I use iPad ( I bought about 2 months age)as my machine to open Face Book and I can do most of the normal functions as my iphone, but I can write comment to friends' comment but can not post. I can have my "status", "photo" only can not post comment, Why and how to make it work?

Thanks for the info.
Firstly, make sure you are not using the split keyboard. There is a bug in the app which disables the send button. Make sure it is the full keyboard you are using. (Pinch the split keyboard to rejoin it).
If you still have no luck, then use the website, or an alternative app. They are generally better than Facebook's own offering.
Let me know if this works, or if you have any other issues,
Nathan

Can not post a comment on the natural news website

Can not post or even see comments on the natural news website:i.e.
http://www.naturalnews.com/036536_James_Holmes_shooting_false_flag.html
Use any other browser and you can actaully see the posts and post if you want o.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

You can only post in new year after closing the previous year.

Hi,
I got error "You can only post in new year after closing the previous year." when I tried to run depreciation for first time for a company.
In OAAR, it was noted that FY2008 already closed.
Please advice.

I understand you did the asset upload in 2008 and want to run the first depreciation run for 2009?
In that case have a look in your take over data settings: SPRO:
Financial Accounting / Asset Accounting / Asset Data Transfer / Parameters for Data Transfer / Date Specifications / Specify Transfer Date/Last Closed Fiscal Year
This should be 31-12-2008 (if the calendar year is the same as the fiscal year)

Dep Error:AA687-You can only post in new year after closing the previous year.

Hi Experts,
I need solution on error while posting dep. we have new co cd started operative from Jan -14 . So while doing dep posting run we are getting error "AA687-You can only post in new year after closing the previous year".
I searched and got that Note 144441 need to implement.
Let me know whether is it fine to go ahead or Is there any alternative solution.
Also i want to know what need to to be done after implementing this note.
please reply , its bit urgent.
Regards
Atul

Hi Deepanshu,
Also the FI period is also closed 2013 so in this case do i need to open the same , correct? for running dep posting along with OAAQ opening for AA.
Or the note implementation will take care all. instead of running dep , opening closed period.
pls suggest.
Regards
Atul

After updating my MacBook Pro to yeosemite I want my old screen saver picture back. I did a full back up before the install. I found the "Settings" folder in Time machine but when I try to open it I get an error message saying "You can not open this

After updating my MacBook Pro to yeosemite I want my old desktop picture back. I did a full back up before the install. I found the "Settings" folder in Time machine but when I try to open it I get an error message saying "You can not open this folder. It is in TimeMachine".

Can you browse the Time Machine drive from Finder?
If you can and you know where the picture was stored ie on your desktop you can browse through the folder structure to the picture copy it and paste it somewhere on your new install before right clicking it and 'set as desktop background'

You can not post to asset xyz ( investment support measure) ??

Similar Messages

Maybe you are looking for