You can only make a complete transfer posting for the quant?
Dear All,
The error message "You can only make a complete transfer posting for the quant" displayed when I Create a TO in LT03 for a Delivery. While the total available qty = 200, I am only creating TO for qty = 5.
What settings need to be done to allow partial quatity?
regards,
Shetty
Hi,
Please check the below config in your system:
LE>WM->Interfaces>Shipping>Define Shipping Control-->Shipping Control per Warehouse Number
Here Put check for partial picking .
Hope it will help you.
Rgds,
Kris.
Similar Messages
-
Yesterday iTunes 10.5 offered to upgrade the iPhone 3G to the version of I don't know, most likely to the new. After that, the screen of the cable and the icon iTunes, you can only dial emergency calls. What to do? How to get back to the previous version, or at least to do so would the phone began to work? I'm from Russia, so you need the Russian version. Help please! Describe all of the items what to do... I'm in a panic!
Sounds like this was a hacked iPhone...hacked to unlock it so you could use it where you live. One of the big downsides to hacking an iPhone, to unlock it, is that updating software or restoring the phone will re-lock it to the carrier it was originally locked to. This appears to be what has happened to you. You have two choices to fix things: 1. Get the phone officially unlocked, or 2. Re-hack it to unlock it(sorry, can't be discussed here). Good luck.
-
Depreciation run problem."You can only post in new year after closing the"
Hi,
We are implementing Asset accounting to one of our co code.New Assets were created in Jan and when I tried to Post depreciation for Jan, I get an error log that says "You can only post in new year after closing the previous year."
When i double click on error message.
Diagnosis
You want to post in a new fiscal year. However, a posting must have been made in the last period in the previous fiscal year before you can do this.
Procedure
Post to the last period in the previous year first.
So I went ahead and opened the previous year, posted the depreciation, closed the year and tried to post Period 1 again, but still get the same error.
Why do I need to post the previous period if I just created the assets in this period?
I Have completed AJRW, AJAB also.
I think it may be a problem with Table. Please suggest me.
Thank youHi,
Please check the following :-
1. Check the Last Closed year in your Asset Accounting.
2. Check the Last Depreciation Posted in Your Asset Accounting.
These 2 menus are available in "Data Transfer in Fixed Asset Accounting".
revert back to me for further actions,
regards
N.Kumar -
I have several issues that I hope you can help me out with. I am a professional photographer with a Mac with OS X 10.9.4:
- I can only make ONE contact sheet in CS6 (from AUTOMATE) from pictures indicated in Bridge. If I want to make another contact sheet I need to shut down and restart CS6.
- Camera RAW: if I change any setting in Camera RAW (except exposure), having first optimized the exposure, the exposure will automatically return to zero. Sometimes when I've set exposure and cropped the picture in Camera RAW Plug-In, the effects are lost just by opening the picture in CS6.
- Sometimes if I crop a picture in Camera RAW, it may be impossible to open it again from Bridge!
- I cannot do lens corrections in Camera RAW, at all. The Camera RAW comment is that "it cannot load the correct lens type". Why?Are you writing that when you select a large number of images in the bridge like a hundred thumbnails when you then use Bridge menu Tools>Photoshop>Contact Sheet II that Photoshop only produces a single contact sheet for the first few thumbnails and fails to produce additional contact sheets for the other selected thumbnails? Photoshop contact sheet II script should create as many contact sheet as needed for the numbers of thumbnails selected. Perhaps the script is hung or you have exhausted your machine resources.
ACR Crop tool does not crop the RAW file it records crop settings to be used during the conversion process. Camera RAW DATA is not altered. The only changes made to RAW Files is ACR Metadata may be added. Anything you do in ACR can be un-done in ACR. If you can not open a RAW File in ACR the Files is either corrupt or from a new camera ACR does not support yet. ACR should not corrupt RAW files.
If you do not have a lens profile for ACR I think you should still be able to do lens correction manually in ACR.
Some of what you write I don't follow could you post some screen captures of your problems often a picture helps. -
Asset You can only post in new year after closing the previous year
Hi Experts,
I am getting below error while running the depriciation:
You can only post in new year after closing the previous year.
Message no. AA687
Diagnosis
You want to post in a new fiscal year. However, a posting must have been made in the last period in the previous fiscal year before you can do this.
Procedure
Post to the last period in the previous year first.
Note : I closed FY09, even though there were no assets in it at the time. The first asset was capitalized on 12/29/09 (clearly in FY10). I tried closing FY09 again and got the messege No year-end close is necessary for company code XXXX .
Could you please any one help me on this.
Thanks In Adwance
Regards,
Saritha.Hi Saritha,
Please check the following settings:
o Is there one ore more years since the last depr. run?
Solution: in this case an entry must be made into the table TABA.
Note 144441 gives a solution to make a "Dummy-entry".
o If there was never a depreciation run, the there must be 000/0000 in
TABA and T093D.
Solution: please take the report from the note Note 144441
and put the values 000/0000 in this fields.
o Do you have a non-calendar fiscal year (e.g. 2009/10)? In this case
you should have in the field T093D-AFBLG the year 2010.
Solution: Correction with note 26073
regards Bernhard -
You can only post in new year after closing the previous year.
Hi,
I got error "You can only post in new year after closing the previous year." when I tried to run depreciation for first time for a company.
In OAAR, it was noted that FY2008 already closed.
Please advice.I understand you did the asset upload in 2008 and want to run the first depreciation run for 2009?
In that case have a look in your take over data settings: SPRO:
Financial Accounting / Asset Accounting / Asset Data Transfer / Parameters for Data Transfer / Date Specifications / Specify Transfer Date/Last Closed Fiscal Year
This should be 31-12-2008 (if the calendar year is the same as the fiscal year) -
I am trying to reinstall Dreamweaver CS3 from the CD after having computer issues. Now getting error "You can only install one Adobe product at a time. Please complete the other installation before attempting to install ......." There is no other Adobe product installing. I have used the Adobe Cleaner Tool many times and uninstalled other Adobe Products but neither has worked. I have uninstalled/reinstalled this CD version of Dreamweaver several times when changing computers and after having computer issues. A google search of the problem suggested it may be an error related to the number of times I can reinstall this product due to licensing issues. Please help.
A google search of the problem suggested it may be an error related to the number of times I can reinstall this product due to licensing issues.
Absolutely not. You are misinterpreting things. The activation check never happens when just running the installer, only much later. It means what it says - there is another "install" pending/ active on your system, meaning somewhere there is an (invisible) process still blocking things. Either way, since you haven't provided any real technical info, we can't advise specifically. if you are on Windows, you may want to check your task manager and terminate any setup.exe and msiexec.exe processes plus potentially may need to manually fix/ delete some registry keys. For anything beyond that you will have to be much more specific.
Mylenium -
Message# AA649 In area 01, you can only post manual dep. up to the amount
hi friends
when i do the transaction in ABAA ,it went error said that In area 01, you can only post manual dep. up to the amount 0
i had select allowed all value in unplan depreciation ,and why the detail message said the The asset does not have any net book value; in this case, you should check the transaction as described above.
Asset affected: 000025100073-0000
Diagnosis
This posting cannot be performed, since manual depreciation can only be posted in the amount of 0.00 in area 01.
Procedure
Check the transaction type entered, or change the posting amount.
Caution: If the amount concerned is 0, this could be the result of two situations:
1. The asset does not have any net book value; in this case, you should check the transaction as described above.
2. The asset has a depreciation key with automatic depreciation calculation. However, if you want to include depreciation in addition to the automatically calculated depreciation, it has to be unplanned depreciation.
Otherwise, you should use a depreciation key that does not calculate automatic depreciation (SAP-supplied key: MANU).
thanksHi,
1) Transaction type 640 normally is a previous year transaction type. My suggestion is that you have no values from previous years.
You use the transaction type 640.
Please check if it works with transaction type 650.
Check the setting from the transaction types:
Table TABW (SE16)
=================
Trans. Type........Trans.Type grp.
640.........................64
650.........................65
Table TABWG
==============
Trans.Type grp. ...........Curr.-yr.acq. transaction
64
65..................................................X
The difference between this 2 transaction types 640 and 650 is the sign TABWG-XZUGNE (Current-year acquisition transaction) in the transaction type group.
2. Please see the text passage from 13221 point 2:
2. An incorrect depreciation key is used. Manual depreciation and
automatic calculation of the same depreciation type are mutually
exclusive.
If another depreciation must be set in addition to the automatically
calculated depreciation, there has probably been an unplanned
depreciation.
If the asset should have only manual depreciation, please use
another depreciation key, for example, 'MANU'. ..."
regards Bernhard -
do any of you experience Im having with my ipad? I can't make a comment in Facebook for older posts and I can't open numerous comments from old posts of my friends. but everything works perfectly when I use my laptop(non-apple). is there problem between apple and FB?
Facebook apparently has their site coded poorly for tablets with touch screens. Try using the Facebook app. It is not perfect either but it is better than view in a browser lately.
-
When I put a movie DVD in my external reader it makes a strange noise and at times it gets hung up I have to force quit it and then I can eject the dvd
I believe I read some wherre that you can only use the reader that came with my computerThat sounds like the drive is faulty. CD and DVD will have seperate heads, and burn and read will be different lasers in each. If it's still in warranty I'd exchange it.
-
Dep Error:AA687-You can only post in new year after closing the previous year.
Hi Experts,
I need solution on error while posting dep. we have new co cd started operative from Jan -14 . So while doing dep posting run we are getting error "AA687-You can only post in new year after closing the previous year".
I searched and got that Note 144441 need to implement.
Let me know whether is it fine to go ahead or Is there any alternative solution.
Also i want to know what need to to be done after implementing this note.
please reply , its bit urgent.
Regards
AtulHi Deepanshu,
Also the FI period is also closed 2013 so in this case do i need to open the same , correct? for running dep posting along with OAAQ opening for AA.
Or the note implementation will take care all. instead of running dep , opening closed period.
pls suggest.
Regards
Atul -
My Library shows some albums as separate titles so you can only choose 1 title at a time but not the whole album to be played. How do I create a complete album ?
check out this excellent user tip by Steve MacGuire.
-
I get this pop up when trying to create a photo book through the iPhoto store.
"Some or all of the photos you selected were downloaded from your published albums. You can only view these photos. To use them in an album or a slideshow or project, you must import them to your photo library."
The photos I have selected have already been imported so how and why do I do it all over again?
What do they mean by published albums? I categorize them into photo albums for organizational purposes after I import them from my camera or phone. So why can't I put them into a book now?
I have over 400 photos selected for a photo book for my child's graduation gift so how can I tell which photos I have to do this to?
Please help. Any insight wouyld be appreciated.
Confused and frustrated...Give this a try: apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
OT -
How can you put a setting that you can only move to a next slide by clicking on the forward button?
I am very sorry if there is somewhere already given an answer
to this but can somebody help me please?
When I use a space, enter or click in my quiz, they move on
to the next slide without answering the previous question
completely. How can I make sure that you can only move on to the
next slide with clicking on the forward button???quiz preferences --> Settings --> Required: Answer
all -
okay so i updated itunes and now it wont let me sync anything it keeps giving me that "you can only be synced with one computer at a time erase and sync" but this is the only computer ive ever used!!! pleeeease help!!
<Edited By Host>Re: That garbage is unreadable.
If you really want help, stop messing with the fonts and post so that others can read and offer suggestions.
Or better yet... try a search, I'm certain you'll find a solution to whatever issue you're experiencing.
I have found that many times it is the things that make you most angry that push you to action. This was the case here. Thank you for causing me to get so angry that I found the answer myself.
Maybe you are looking for
-
Problem in Multiprovider Query
Hi Experts, I had developed an query on Multiprovider, which is on MM & PP Cube. In the Query Designer,i had created some new selection with two characteristics restriction ( MOvement Type & Trans/Ev Type) and with a key figure.In the re
-
Float to Top; Reposting Message?
Hello all - Does the "Float to Top" option affect the viewing of just the user who checks it, or does it affect everyone visiting the topic area? I've looked at the help files and did not see an answer, perhaps I missed it. If it only affects one u
-
Switching hardware from Dell to Apple. Use Mostly Windows
I need a little help. Don't shoot until you read the end. I am a business owner who runs equipment dealerships in AZ and CA and also a gadget hound. Have had 20 PDA's, etc and am always looking for the best hardware setup. I have a Dell Lattitude D82
-
Mysqldump not dumping all vibe data
I am backing the vibe database (sitescape) with mysqldump for relocation to another server, however on looking into the file it does not contain all the records. For example ss_principals, the only data record in the backup is for the admin account.
-
I have iPad air, screen freezes after FaceTime call and cannot get back to home screen, have to power down and turn back on to get back to home screen. What am I doing wrong?