You can't open the application tar because PowerPC applications are no longer supported.   Downloaded upgrade for Safari: using intel-based iMac

System Automatically notified me of an update for Safari - told it to continue.  After a few seconds, the system displayed about 12-14 error messages:
“You can't open the application tar because PowerPC applications are no longer supported.”
  Package being updated: Safari v6.0.1
Package displayed size: 48.5 MB
My system is:
NOTICE: it is NOT a PowerPC!
What's going on???   This is a reoccuring problem with many updates..

Your profile states Mac OS X (10.7.1) is this correct?
From the update web page this is the info
Safari 6.0.1
        Note: For OS X Mountain Lion systems, Safari 6.0.1 is included with OS X Mountain Lion v10.8.2.
SafariAvailable for: OS X Lion v10.7.5, OS X Lion Server v10.7.5, OS X Mountain Lion v10.8 and v10.8.1
http://support.apple.com/kb/HT5502?viewlocale=en_US&locale=en_US
Perhaps you need to update from 10.7.1 to 10.7.5 if you can before trying to install the Safari update.
If you do update to 10.7.5, make sure you have good backups available.

Similar Messages

  • Unexpected pop-up: You can't open the application tar

    When running Safari, occasionally a message pops up saying "You can't open the application tar because PowerPC applications are no longer supported." As I recall, the messages appears many times while installing updates. I have Mac OS X 10.7.5 on a MacBook Pro. Is there anything I can do to stop this?

    I was in Microsoft Word for Mac just now, and the message popped up again. Is there something else I can do to find out why I get this useless message and/or get rid of it? Perhaps Apple Support Communities is not the right avenue, or I simply do not know how to use it properly. Thank you for any help here.

  • YOU CAN'T OPEN THE APPLICATION VIRTUAL DJ LE BECAUSE IT IS NOT SUPPORTED ON THIS ARCHITECTURE .. What can I do to Fix this??

    I have a Mac PowerPC G5 and i just installed the Version 10.5.4 to be able to install Virtual DjLE , and after I installed it, i try to open it and there was an error msg saying : " you can't open the application virtual dj le because it is not supported on this architecture"
    What can I do to resolve this? ... Can someone help me with this?? ..
    Thank you for your help!

    Hi, we're out of luck...
    MAC SYSTEM REQUIREMENTS
    MINIMUM system requirements:
    Intel® processor
    Mac OS X v10.5.x
    1024x768 resolution
    CoreAudio compatible soundcard
    1024MB RAM
    50MB free on the hard drive
    RECOMENDED system requirements:
    Intel® processor
    Mac OS X v10.6.x
    1440x900 resolution
    Multi-channel CoreAudio compatible soundcard
    2048MB (2Gb) RAM
    200MB free on the hard drive
    Additional requirements for Video mixing:
    ATI™ or NVIDIA® video chipset w/256MB of Dedicated DDR3 RAM
    Video must support dual-screen output
    Supported Operating System and Processor Platforms:
    MINIMUM: Mac OS X v10.5 Leapord on Intel processor platform
    RECOMMENDED: Mac OS X v10.6.x Snow Leapord on Intel processor platform
    Apple® Mac OS X 10.4.x Tiger or older are not supported
    Motorola® (PowerBook® G4) processor platform or older are not supported
    http://www.virtualdj.com/products/virtualdj/index.html
    Might see if the still have version 6.x here...
    http://www.virtualdj.com/download/updates.html

  • HT1338 I am trying to setup my external drive, but when I do, I get a box that pops up that says You can't open the application "LaCie Setup Assistant" because PowerPC applications are no longer supported".

    When trying to setup my external hard drive, I get this box that pops up and says this:
    You can’t open the application “LaCie Setup Assistant” because PowerPC applications are no longer supported.

    PowerPC was a type of processor used in Mac systems before Apple switched to Intel-based processors. These older chips required applications to be coded differently, to the extent that they will not run on the Intel processors in newer Macs. Apple used to include a translator that allowed these programs to at least run, but this translator is no longer available so if you run into an older PowerPC-based program then OS X will give you this error.

  • TextEdit.app is corrupt. I have tried repairing and I have tried reinstalling but it still says You can't open the application TextEdit.app because it may be damaged or incomplete.

    TextEdit is  not working. I have tried repairing and I have tried reinstalling but it still says "You can't open the application TextEdit.app because it may be damaged or incomplete."
    Can anyone give me some other ideas as to how to fix.  Thanks.

    Thats the first thing I tried last night. And reinstalled just textEdit but no luck, then I deleted TextEdit and reinstalled it again and I was still getting the same message.  Tried pacifist this morning again but this time I tried reinstalling the whole apps package half way through its says it cant reinstall due to multiple missing files.
    Tried the repair option on the OS  disc it says everything is fine

  • When trying to open iphoto I get the error message "You can't open the application iPhoto because it may be damaged or incomplete." How do I fix this and get my photo's back?

    When trying to open iphoto I get the error message "You can't open the application iPhoto because it may be damaged or incomplete." How do I fix this and get my photo's back?

    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    2c: on 10.7 they're at
    /private/var/db/receipts
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    If you purchased it on the App Store you can find it in your Purchases List.

  • Just downloaded mavericks, now iPhoto won't load because of an error message that says "You can't open the application "IPhoto" because it is not supported on this type of Mac" . I have a 17" MacBook Pro, mid 2010 model running 2.53 GHz and Intel Core I5,

    I just downloaded the new Mavericks operating sytem on my mid 2010 MacBook Pro, 17" 2.53GHz, Intel Core I5 machine. My IPhoto is no longer working at all, I'm getting an error message that says - "You Can't open the application "IPhoto" because it is not supported on this type of Mac". I also loaded Mavericks onto my other MacBook Pro 17", mid 2009 model and everything works fine. I would think that the newer Mac would easily work with IPhoto. Also, when I try to download from the App Store, it asks for my Apple ID and Password, I enter it, and then the little spinning color wheel just spins forever, with nothing ever happening. I tried downloading the IPhoto Upgrade but it never actually downloads, HELP!!!

    What version of iPhoto do you have installed?  Is if one of the versions shown as not compatible in this screenshot?
    If it is then go to the App Store and download iPhoto 9.5.  It will be free if you have an iPhoto 9 or later verson currently.
    OT

  • You can't open the application "Adobe InDesign CS4" because it is not supported on this architecture"

    A day or two ago I went through installing Adobe InDesign CS4 on Leopard OS X.5.8.  After what appears to be a successful installati
    on, in launching InDesign CS4 the message " You can't open the application "Adobe InDesign CS4" because it is not supported on this
    architecture" comes up".  Calling in to support and speaking with the agent who read through previous posts, suggested to me that I
    should try the same fix that has been suggested when I ran across an error when installing Adobe InDesign CS4 on another separate ha
    rd drive externally connected to this computer running Snow Leopard OS X.6.1 for the error reading: "Damaged &/or incomplete install
    ation" when launching afterwards.  The support technician told me to first delete with the uninstall Adobe InDesign CS4, InDesign.
    Following this I am told to run the CS4 Cleanup Utility.  I restart the computer each and every time after running each of the utili
    ties.  Now I am told to install InDesign as a trial version from the DVD and after installation to go ahead & enter the serial numbe
    r.  When launching InDesign CS4 after installation got back the same error as before: "You can't open the application "Adobe InDesig
    n CS4" because it is not supported on this architecture" comes up".  Followed KB404711 article and no success.  What else can be don
    e to fix this issue?
    This morning contacted Adobe Support regarding this response:
    After having a detailed reserach on your issue i acme to the conclusion
    that the problem you are having is not related to Adobe software but its
    in fact related to your MAC version ( OSX-5.8). While reseraching your
    issue i came across
    to many forums where a lot of postings were about the similar error but
    with different products the only comon thing was all the Errors were
    with Mac machine , also when you check the system requirements  for
    Adobe Indesign Cs4
    by going to the following link
    http://www.adobe.com/products/indesign/systemreqs/?promoid=DRHXE  you
    will find the Mac OS version supported are from Mac OS X
    v10.4.11–10.5.4. but we do support Snow Leoprad , so i would like
    to advise to you to either contact your system manufacturer or upgrade
    to Snow Leopard ( mac os x 10.6)
    I have been told that my case is being sent to Level 2 agents and that it can take 24-48 hours for a response.  In the meantime I decided to see what the Support Forums can do for me.  Until then I am down.  Thanks for the help.

    In the application folder there is a folder 'Adobe InDesign CS4' within which there is just the application file. I would expect there should be more file there??
    I've un-installed and installed again - still the same.
    Even downloaded the dmg again and done thwe whole thing over again.

  • I am unable to open Photo on my MacBook Pro after installing ilife 11 from a disc.  The message I get says "you can't open the application iPhoto because it may be damaged or incomplete.  What can I do?!

    I am unable to open iPhoto on my Macbook Pro (OSX 10.9.3)  after installing ilife 11 from a disc.  The message I get is "you can't open the application iPhoto because it may be damaged or incomplete.  What can I do?!  Any help will be greatly appreciated.

    Reinstall it.This time delete the receipts first.
    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2. Download it from the App Store to reinstall It's on your Purchases List* there.
    For older versions that have been installed from Disk you'll need these additional steps:
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    2c: on 10.7 or later they're at
    /private/var/db/receipts
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    *Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
    http://support.apple.com/kb/HT4928
    One question often asked: Will I lose my Photos if I reinstall?
    iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.
    Important:
    As you're on 10.9.3 you'll need to update iPhoto to v9.5 before opening it. Use Software update.

  • I installed Lion 10.7.4.  Went to use Photoshop Cs and got a popup window.  You can't open the application Adobe Photoshop CS because PowerPC applications are no longer supported.    Is there a way of getting this to work or do I have to get the all new!

    I installed Lion 10.7.4.     Went to use Photoshop Cs and got a popup window.  You can't open the application Adobe Photoshop CS because PowerPC applications are no longer supported.    Is there a way of getting this to work or do I have to get newest version of all of my Power PC apps?

    Welcome to Apple Communities
    PowerPC applications are unsupported in newer versions. You can upgrade Photoshop or you can install Snow Leopard in a partition.
    1. Open Disk Utility (Applications > Utilities) and select your drive
    2. Go to Partitions tab, press + button, create a new partition and press Apply
    3. Insert the Snow Leopard install DVD and reboot pressing C key
    4. Install it in the new partition
    5. If you want to change boot, go to System Preferences > Startup Disk and select 10.7

  • A pop up is displayed every 10 seconds "You can't open the application NotificationExec because PowerPC applications are no longer supported"

    Shortly after upgrading to version 10.7, I installed an application that was not compatable with the LION operating system.  The application was for an external Maxtor hard drive that appearantly was intened for an earlier Mac operating system.
    Now I get the popup "You can't open the application NotificationExec because PowerPC applications are no longer supported" about every 10 seconds.
    How to I get rid of this.
    There is nothing to Force Quit.  The process (if it is a process) does not show up in Activity Monitor.  I have also tried to use the KILLALL command but no process is found by that name.

    Absolutely frustrated by the same problem, just lost 3 hours of my day trying to uninstall after getting the same error message. The ONLY thing that worked for me was going to the following Maxtor (Seagate) URL:
    http://knowledge.seagate.com/articles/en_US/FAQ/199931en
    I downloaded their "remove maxtor sw.zip" file
    Click here to download the remove_maxtor_sw.zip file and store it on your system's desktop.
    And it worked perfectly. Took 10 seconds and - after restarting - it was done.
    What a waste of the day!!!

  • Please help with "You can't open the application NovamediaDiskSupressor because PowerPC applications are no longer supported." I have seen other responses on this but am not a techie and would not know how to start with that solution.

    Please help with the message I am receving on startup ""You can't open the application NovamediaDiskSupressor because PowerPC applications are no longer supported."
    I have read some of the replies in the Apple Support Communities, but as I am no techie, I would have no idea how I would implement that solution.
    Please help with what I need to type, how, where, etc.
    Many thanks
    AppleSueIn HunterCreek

    I am afraid there is no solution.
    PowerPC refers to the processing chip used by Apple before they transferred to Intel chips. They are very different, and applications written only for PPC Macs cannot work on a Mac running Lion.
    You could contact the developers to see if they have an updated version in the pipeline.

  • I have a big crossbar mark over my FF4 icon after I've installed and replaced FF3. When I try to open the software, I get "You can't open the application "Firefox" because it is not supported on this architecture." What's up with that?

    I have a big crossbar mark over my FF4 icon after I've installed and replaced FF3. When I try to open the software, I get "You can't open the application "Firefox" because it is not supported on this architecture." What's up with that?

    Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
    If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html

  • I am trying to install Final cut pro studio V1.0.1 (2005) on OS X lion. I get a message "You can't open the application final cut studio.mpkg because power pc application are no longer supported

    I am trying to install Final cut pro 5 studio V1.0.1 (2005) on OS X lion. I get a message "You can't open the application final cut studio.mpkg because power pc application are no longer supported. My computer is New. Is their a link I can go to get tech support?

    You won't find any help at tech support ... other than telling you the facts: Intel processor Macs require FCP 5.1 or higher.  FCP 5.0 and earlier were written for PowerPC processor Macs, long before Apple switched to using Intel processors.
    And then there's the issue of the OS.  OS 7 will allow FCP 7 (and sometimes even FCP 6) to work OK, but versions earlier than that have spotty operation on Lion.
    Here's a brief history of full FCP versions and recommended OS compatibility:
    * = requires PPC             ** = works with both PPC and Intel                          *** = require Intel
    FCP 1.0*       OS 9
    FCP 2.0*       OS 9
    FCP 3.0*       OS 9, OS 10.1, OS 10.2
    FCP 4.0*       OS 10.2, 10.3
    FCP 4.5*       OS 10.3
    FCP 5.0*       OS 10.3 (OS 10.4?)
    FCP 5.1**     OS 10.4, 10.5
    FCP 6.0**     OS 10.4, 10.5, 10.6 (OS 10.7?)
    FCP 7.0***    OS 10.6, OS 10.7
    FCP-X***       OS 10.6, OS 10.7
    Essentially, you have a newer Intel processor Mac with a new OS and very old, incompatible software.   You might be able to find a used version of Final Cut Studio 3 on sites like ebay or craigslist as it is no longer offered by Apple as an upgrade.
    Alternatively, you could purchase and download FCP-X, but it is an entirely different application, sharing virtually nothing with previous versions of FCP.
    -DH

  • When i try to open the iPhoto app, i getting a message "you can't open the application because it is not supported on this type of mac"

    when i try to open the iPhoto app, i getting a message "you can't open the application because it is not supported on this type of mac"

    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2. Download it from the App Store to reinstall It's on your Purchases List* there.
    For older versions that have been installed from Disk you'll need these additional steps:
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    2c: on 10.7 or later they're at
    /private/var/db/receipts
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    *Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
    http://support.apple.com/kb/HT4928
    One question often asked: Will I lose my Photos if I reinstall?
    iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

Maybe you are looking for

  • Migration from PowerPC G5 OS X 10.4

    Here is the situation. I have a PowerPC G5 OS X 10.4. The G5 has two harddrive. HD1 has all the applications. The user account is on a secondary harddrive (i.e. HD2). I want to migrate the user account to iMac (Intel 10.6). If I chose migrate from an

  • BAPI_ACC_ACTIVITY_ALLOC_POST

    Hi, I am  using this bapi to reverse a CO document. When I check the table COBK in order to view my documents, the field SOTKZ is always initial. I am looking for the way to tell the bapi I want this field activated; Do you Know how can I achieve thi

  • Xpath and oracle business rules

    Hi; are there any examples that demonstrate using XPath in a rule? Any comments on whether oracle business rules might be a valid choice for an application that needs to enforce a set of, and varying, constraints on an incoming XML document. Thanks f

  • SOAP Access from ALBPM Studio

    I have a problem on accessing a webservice via SOAP. In detail: the webservice is developped in .NET (with Visual Studio .NET). I just took the WSDL file and generated the Service in ALBPM Studio. So far everything works fine. But if i try to access

  • HT4314 How do i get out of a frozen screen that says "updating games"?

    How do I get out of frozen screen that says "updating games"?