You cannot make an assignment to make-to-order stock

HI ALL,
Here my scinario is make to order scenario. When in material master i given MRP PD, lot size lot for lot. Strategy 20. after creating sales order i did MRP run system created planned order but while converting plan order to process order the system not allow the conversion and gives following message ?You cannot make an assignment to make-to-order stock?. Please let me know why this erroer comes ?
Thanks & Regards
Rahul

hi,
can u please tell me the message class and number for your error.
regards
ramesh

Similar Messages

  • You cannot make an assignment to make-to-order stock - Message no. CO684

    Hi,
    During conversion of planned order to production order in variant configuration scenario I am getting following error message....
    You cannot make an assignment to make-to-order stock
    Message no. CO684
    Diagnosis
    The component cannot be allocated to an individual stock because make-to-order production and engineer-to-order production cannot be executed with this order.
    A possible cause is that you are trying to create an order with reference to a sales-order/project, where an account assignment to a sales order/project is not allowed in the settlement profile that is assigned to the chosen order type. This is inconsistent.
    System response
    The following responses are possible:
    Order processing is canceled.
    The system resets the special stock indicator back to the original value.
    Procedure
    Choose another order type.
    Any ideas or suggestions to correct this issue..
    Pavan

    Hi Pavan,
    This is one of the most common problem comes during MTO execution.And the real problem is massage no itself because you will get the same massage no. for many reason and that's it becomes more difficult to find out root cause.
    Check below threads and settings,
    - Order type for MTO is not maintain in Production scheduling Profile.Go OPKP or CORY and maintain Order type for MTO to it.
    - [Thread 1|Error Message while cretaing a Process Order;
    - [Thread 2|Error in Variant Configuration CO684;
    - [Thread 3|error information when covert plan order to production order;
    - [Thread 4|You cannot make an assignment to make-to-order stock;
    Regards,
    Dhaval

  • (You cannot make an assignment to make-to-order stock ) in variant Config

    Hello Gurus,
    I configured variant and executed. system generates Planned order and when i tried to convert Plnd order to prd order its give me message (You cannot make an assignment to make-to-order stock)
    please let me know where i'm making mistake.
    Thanks

    Hi,
    Check ur planned order and the master data of it if there assignment of the sales order is there then the system will allow you to convert this into production order.
    check ur settlement profile assigned to ur order type.
    Go to -
    >md12-->put planned order num.----> go to master data -
    > there you will find the sales order assigned to that order .
    Then check settlement profile assigned for ur order type with standard settlement profile PP01 at OK07
    Please use notes 432109.
    Regards,
    R.Brahmankar

  • Message " You cannot make an assignment to make-to-order stock"

    Hi,
    i'm trying to create a production order for a specific material, but I get this error message:
    "The component cannot be allocated to an individual stock because make-to-order production and engineer-to-order production cannot be executed with this order.
    A possible cause is that you are trying to create an order with reference to a sales-order/project, where an account assignment to a sales order/project is not allowed in the settlement profile that is assigned to the chosen order type. This is inconsistant."
    I have checked the settlement profile and valid receivers: "G/L account" and "sales order" are set to 1 "Settlement Optional".
    Which can be the problem?
    Thanks in advance,
    Luis.

    Hi,
    in the allocation structure assigned in the settlement rule, is there an assignment for receiver category "SDI" (Sales Order Item) maintained? If not  thats the reason.
    best regards, Christian

  • Cannot able to assign Operation number for Order for Change cost assignment in Travel

    All dear Gurus,
    During the creation of travel request in NWBC suppose if an employee opted to change cost assignment. And he selected order from Accounting Object and given an order. He is not able to select it because he is getting an error when he click on Accept.
    The error is " Order 1000000160 requires assignment to an operation number "
    In ECC we have an option called Enhance Cost assignment through which we can choose the operation number. But no such option is available in NWBC.
    Kindly help me to solve the issue.
    Regards,
    Namsheed.

    Hi,
    Business Area is a Required entry for G/L account 1180 300000.
    So
    Go to FS00, and check Filed Status Group,for G/L account 1180 300000
    Go to OBC4, check the Filed Status Group, what u have mentioned for the G/L account 1180 300000.
    Go To material management segment and put optional entry for the field of Business Area and save.
    Now try ur transaction.
    Regrads,
    Biju K

  • MTO: You Can not make assignment to make to order stock.

    Dear All,
    I am facing an issue during production order creation. The following error message persisting while creation of production order for setuping Make to order scenario.
    Details:
    I have created a sales order with configurable material (Not BOM).
    Item category: TAC, Stratergy Group: 20, Requirement Type: KE, Requirement Class: 040. (Contains, Acc *** Cat: 'E' and Special Stock Indicator 'E'.)
    Sale Order successfully saved and Requirements passed to MD04. I have run the MRP, System created Planned Order successfully.
    From MD04, When I am transferring Planned Order to Production Order The below error is persisting.
    Error Message: You Cannot make an assignment to Make to Order Stock. Message No: CO 684.
    I am using a custom production order type (Say ZP01) with settlement profile SD1 assigned to it.
    I have also activated the sales orders in TC: OKKP.
    I am using ECC 6.0. and Implemented OSS note: 723180 Still the above error Message is persisting.
    Since the development is in middle of the stage and deadline is very near I need your valuable suggestions to get the clues.
    Thanks & Regards

    Hi Ugameshk,
    First go to OMS2 ang do quantity value upadting tick.....for KMAT material type.
    I am sure you will get your problem solved.
    regards
    tara
    Edited by: tara  bhapkar on Oct 1, 2009 11:37 AM
    Edited by: tara  bhapkar on Oct 1, 2009 11:38 AM

  • I cannot figure out how to make the text larger on an incoming email.  The finger method doesn't work and I cannot find any toolbar with which to do it.  I could find nothing in settings also.  Plese help and thank you.

    I cannot figure out how to make the text larger in a received email.  The finger method doesn't work and I can find no tool bar as I can for composing emails.  I can find nothing in settings.  Please help and thank you in advance.

    Hi there,
    Download a piece of software called TinkerTool - that might just solve your problem. I have used it myself to change the system fonts on my iMac. It is software and not an app.
    Good wishes,
    John.

  • I am extremely upset. I purchased my iPad in SA and I am traveling in Greece. When I want to make use of the free apps, I get a message that the app is not available in the SA store. What is the point of having an iPad if you cannot use it worldwide?

    I am extremely upset. I purchased my iPad in SA and now I am in Greece. I cannot download free apps as I get a message that the apps are not available in the SA store and only in US stores. When I change to the US store the same thing happens. What is the point of having an iPad if I cannot use it worldwide??? I feel that I wasted my money purchasing it as I specifically purchased it to use when I travel. How can I get access to all the available apps and why are they restricted.

    You can use your iPad worldwide. However, each AppleID is tied to
    a specific country's store. To use the AppStore in any country, you
    must be in that country and have a credit/debit card issued by a financial
    institution in that country with a verified billing address in that country.
    It is the developer's choice which AppStores he makes his app available
    from, and some countries prohibit certain apps.
    To make a purchase from the US store (including downloading a free app
    available in the US store), you must be in the US and have card issued
    in the US with verified billing address in the US.
    You can use your purchases from the SA store worldwide, but you
    cannot make purchases in other than the SA store unless you meet
    the aforesaid conditions.

  • You cannot make direct posting to the g/l account

    Hi
    While creating the std po I am getting the message you cannot make direct posting to the g/l account 165000
    I am working on chart of accounts INT
    I have not checked the check box for automatic posting
    error mesage that I am getting
    No direct postings can be made to G/L acct. 165000 in CoCode BP01
    Message no. ME038
    Diagnosis
    The G/L account you entered is a control account. Transactions cannot be posted direct to a control account.
    Procedure
    Check your input.
    Inform the individual or section responsible for G/L accounts in the relevant company code.
    Thanks
    Prabind Kumar Singh

    Hi
    Goto Transaction code FS00, enter the G/L account 160000.
    enter the company code BP01.
    Click on display, if the system says account does not exist, click on create with refernce or template
    In the popu enter the G/L account 160000 & compnay code 0001.
    Please ensure this account is flagged as Balance sheet account, Recon. account for acct type - K Vendors.
    now do the postings.
    Thanks & Regards
    Kishore

  • This database was connected to a Microsoft Access Services site that is not compatible with this version of Microsof Access. You cannot make design changes or modify data in database.

    Hello All,
    I am getting this error while I am connecting my access database website for the change
    "This database was connected to a Microsoft Access Services site that is not compatible with this version of Microsof Access. You cannot make design changes or modify data in database."
    I am using SharePoint 2010 and Microsoft Office 2010.
    I have created one Contact Database Site and now I am trying to modify the layout of the form in Access. and I am getting the error that I have mentioned.
    Please provide help on it.
    Thanks in Advance....

    Hello All,
    I got the answer, we have to enable the port 80 or where the access service is deployed and we have to change Trust setting and also, enable the macro from Access.
    Hope this will help to other....

  • Does the macbook have a screen cover that makes it so the person next you cannot see what you are doing?

    does the macbook have a screen cover that makes it so the person next you cannot see what you are doing?

    Hello 23435,
    Welcome to the Apple Support Communities!
    I understand that your iPhone was knocked out of your hand and now it displays blue and black colors on the display. It does sound like this iPhone may need to be evaluated for service. If you would like more information about this process, please refer to the attached web link below. 
    iPhone Other Repair Options - Apple Support
    Have a great day,
    Joe

  • I just upgraded my iPad to ios6. Now my Epson iPrint crashes all the time. I called Epson and they had no answer...said to use AirPrint instead. But AirPrint stinks because you cannot change printer settings. Anybody know how to make iPrint work on ios6?

    Anybody know how to make Epson iPrint work on ios6? Epson told me to use AirPrint, which stinks because you cannot change printer settings.

    Epson needs an update to their app to support ios6. I'm sure they will in time.
    Try deleting it and re download it. If that doesn't work, it's what I said above. :(

  • I can't make a call but i can received calls and send text messages its say you cannot make a call check the phone settings!

    i can't make a call but i can received calls and send text messages its say you cannot make a call check the phone settings!

    It is not a cell phone.

  • Make it so you cannot delete history

    Hi, i want to make it so you cannot delete this history on my computer to monitor which sites my kids are using? How can I disable this so they cannot delete the history, and i only i can do it with a password or something?

    HI and Welcome to Apple Discussions...
    If they have access to your Safari/Preferences window then they can change the way in which your control the History using the pop up menu.
    You might want to consider using Parental Controls.
    Open System Preferences/Parental Controls
    You may need to click the gold padlock icon to make changes. You will be prompted for your admin password.
    Help here to set that up. http://theappleblog.com/2009/01/13/kid-proofing-a-mac-with-parental-controls/
    And a video tutorial here. How to Setup and User Parental Controls in Leopard
    You can use the Property List Editor to see which sites have been visited without the History trail.
    Go to ~/Library/Safari and double click the History.plist file.
    ~ (Tilde) represents your Home Folder
    The Property List Editor will open.
    Click the black disclosure triangle next to: WebHistoryDates so it faces down.
    You can view website addresses in the History there.
    Carolyn

  • How to make the line items of sales order cannot be deleted.

    Hi All,
    Is there any Enhancement spots or user-exits which make the line items of sales order cannot be deleted if item category is 'TAN'.
    Thanks in Advance,
    Sudhakar Reddy .A

    Hi All,
    If you doesn't want to delete sales order line items then we have write in the Include Program which has mentioned below and in the form .....endform.
    Program Name :  Include MV45AFZB
    _Example:_
    form userexit_check_xvbap_for_delet using us_error
                                              us_exit.
    IF .......
      US_EXIT = CHARX.
    ENDIF.
    endform.

Maybe you are looking for