You have exceeded the maximum [1] connections for this session.

Hi Experts,
BIEE Version:11.1.1.6
ESSBASE Version: 11.1.2.1
Below the following path, I have found the log file which the error message, but I do not know why it is and how to solve this problem. 'BIEE_HOME\instances\instance1\diagnostics\logs\OracleBIServerComponent\coreapplication_obis1\console~coreapplication_obis1~1.log'
Error Message:
[Fri May 10 00:50:02 2013]Local////Error(1030006)
You have exceeded the maximum [1] connections for this session.
Are you facing the same problem? If you have any suggestions, please tell me, thanks.

This is an old issue. Read Doc ID 749386.1 on MOS. The suggested fixes are as follows:
1. The maximum number of connections that are allowed per Port is 250. There is a 250 connection limit per port. Please use a different user ID and desktop as the workaround, so this way a different port can be used.
2. If using a different user ID and desktop is not feasible, increase the value of the maxlogins parameter as indicated below:
Increase the maxlogins in the Essbase.cfg file to 5000, and restart Essbase.
Note: Make sure that there are no sessions active within the EAS console before restarting the Essbase services.

Similar Messages

Can't setup iCloud V 4. I get error: You have exceeded the maximum number of 25000 allowed events and tasks. I get this error no matter what choice I select to setup.

Can't setup iCloud V 4. I get error: You have exceeded the maximum number of 25000 allowed events and tasks. I get this error no matter what choice I select to setup.

Is your I tunes ID an @me.com ID? If not, i cloud ONLY works with an @me.com ID. You will have two ID's. One for I cloud, one for I tunes

You have reached the maximum number of PIN changes for this account"

today i change my device to z10,when run BBW,it shows this message :
You have reached the maximum number of PIN changes for this account. Please visit http://www.blackberry.com/appworld/support for more information.
how can I solve this problem?
many thanks!

BBID: **Removed**
device：z10 stl-2
pin:**Removed**
thanks : )
Edit: PIN, Email ID removed. At no time should you provide any personal information to any other community member. Please review the Community Guidelines and Terms and Conditions of Use. for further information

HELP! URGENT - You have exceeded the evaluation period of this product?!

Hello Experts,
I am having a huge issue here. Our analysts have been receiving this error as of last night and as a result no one can connect to SCSM, this is a really big problem as we cannot provide support until it is fixed.
Upon login, users are getting an error "Failed to connect to server xx.xx.xx.xx"
When reading the details of the error I notice it says I have exceeded the evaluation period of this product - We have not installed the evaluation edition but registered with a serial #...
How can I fix this and get our system back up?
Details of error:
Microsoft.EnterpriseManagement.Common.UnknownServiceException: The service threw an unknown exception. See inner exception for details. ---> System.ServiceModel.FaultException`1[System.UnauthorizedAccessException]: The creator of this fault did not specify a Reason. (Fault Detail is equal to System.UnauthorizedAccessException: You have exceeded the evaluation period of this product. For information on purchasing the retail version of this product, go to http://go.microsoft.com/fwlink/?LinkID=151842.
at Microsoft.EnterpriseManagement.ServiceDataLayer.SessionManagerService.CheckLicence()
at Microsoft.EnterpriseManagement.ServiceDataLayer.SessionManagerService.Connect(SdkClientConnectionOptions options)
at Microsoft.EnterpriseManagement.ServiceDataLayer.BasicDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)).
--- End of inner exception stack trace ---
at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(Exception ex)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore clientCallback)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
at Microsoft.EnterpriseManagement.ServiceManagementGroup.InternalInitialize(EnterpriseManagementConnectionSettings connectionSettings, EnterpriseManagementGroupInternal internals)
at Microsoft.EnterpriseManagement.ServiceManagementGroup..ctor(ServiceManagementConnectionSettings connectionSettings)
at Microsoft.EnterpriseManagement.UI.SdkDataAccess.ManagementGroupSessionManager.Connect(String server)
at Microsoft.EnterpriseManagement.ServiceManager.UI.Console.Credentials.ManagementGroupConnection.TryConnectToManagementGroupJob(Object sender, ConsoleJobEventArgs args)
System.ServiceModel.FaultException`1[System.UnauthorizedAccessException]: The creator of this fault did not specify a Reason. (Fault Detail is equal to System.UnauthorizedAccessException: You have exceeded the evaluation period of this product. For information on purchasing the retail version of this product, go to http://go.microsoft.com/fwlink/?LinkID=151842.
at Microsoft.EnterpriseManagement.ServiceDataLayer.SessionManagerService.CheckLicence()
at Microsoft.EnterpriseManagement.ServiceDataLayer.SessionManagerService.Connect(SdkClientConnectionOptions options)
at Microsoft.EnterpriseManagement.ServiceDataLayer.BasicDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)).
Thanks in advance.

I got this fixed by downloading this tool and re-entering my product key: https://drive.google.com/file/d/0B9DOC059xKJgcXBXV3lRRnp6ZW8/edit?usp=sharing
found it on this post:
https://social.technet.microsoft.com/Forums/systemcenter/en-US/bdcdae43-a4c8-4256-88e9-7f128d078eec/scsm-2012-installing-product-key
People will recommend not using this but it worked for me and countless others.... that being said I am NOT responsible for any loss of information or corruption. I only used this because I had constant backups every day to fall back on if this did any damage
(fortunately it didn't).
Of-course Microsoft wants you to open another support case so they can make more $$ just to offer you the same tool. Hope anyone who experiences this issue finds this post. Have a great day.

You have exceeded the evaluation period of this product

Microsoft SQL Server 2012
MSSQLSERVER
MSRS11.MSSQLSERVER
Reporting Services - Native
1033
Standard Edition
11.0.2100.60
No
I am getting you have exceeded the evaluation period error every time I try and log into our reporting service url. I am able to access SQL Server just fine it is only Reporting Services I am having issues. Can anyone
let me know the best way to resolve it. This is the full error"
An error occurred when invoking the authorization extension.
(rsAuthorizationExtensionError)
Get Online Help
You have exceeded the evaluation period of this product. Please upgrade to
the retail version to continue using the product. For information on purchasing
the retail version of this product, go to
http://go.microsoft.com/fwlink/?LinkID=74446.

Product
Instance
Instance ID
Feature
Language
Edition
Version
Clustered
Microsoft SQL Server 2012
MSSQLSERVER
MSSQL11.MSSQLSERVER
Database Engine Services
1033
Enterprise Edition
11.1.3128.0
No
Microsoft SQL Server 2012
MSSQLSERVER
MSSQL11.MSSQLSERVER
SQL Server Replication
1033
Enterprise Edition
11.1.3128.0
No
Microsoft SQL Server 2012
MSSQLSERVER
MSSQL11.MSSQLSERVER
Full-Text and Semantic Extractions for Search
1033
Enterprise Edition
11.1.3000.0
No
Microsoft SQL Server 2012
MSSQLSERVER
MSSQL11.MSSQLSERVER
Data Quality Services
1033
Enterprise Edition
11.1.3000.0
No
Microsoft SQL Server 2012
MSSQLSERVER
MSAS11.MSSQLSERVER
Analysis Services
1033
Enterprise Edition
11.1.3128.0
No
Microsoft SQL Server 2012
MSSQLSERVER
MSRS11.MSSQLSERVER
Reporting Services - Native
1033
Enterprise Edition
11.0.2100.60
No
Microsoft SQL Server 2012
Management Tools - Basic
1033
Enterprise Edition
11.1.3128.0
No
Microsoft SQL Server 2012
Management Tools - Complete
1033
Enterprise Edition
11.1.3128.0
No
Microsoft SQL Server 2012
Client Tools Connectivity
1033
Enterprise Edition
11.1.3128.0
No
Microsoft SQL Server 2012
Client Tools Backwards Compatibility
1033
Enterprise Edition
11.1.3128.0
No
Microsoft SQL Server 2012
Client Tools SDK
1033
Enterprise Edition
11.1.3128.0
No
Microsoft SQL Server 2012
Integration Services
1033
Enterprise Edition
11.1.3128.0
No
Microsoft SQL Server 2012
Reporting Services - SharePoint
11.1.3128.0
No
If you notice correctly you can see your SQL server reporting service is not patched to SP1.I would recommend you to first apply SP1 for reporting service and then try to follow advise mentioned in below article.
It is same which Allen Li pointed
http://support.microsoft.com/kb/971268
I am not sure this could be workaround but you should give it a try.
There are 2 reporting services mode running one is sharepoint integrated and other is native try upgrading native and can you please tell which one is giving the error.
Also if you see the screenshot pasted by you one has stand edition other has enterprise .Is is correct ?
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Since yesterday I'm unable to send emails alleging I have exceeded the maximum number of emails per day, but I had only sent out 24 and NO bulk emailing - (much less than 1000 as per the website) and I'm STILL not able to send emails.Any advice?

Since yesterday I'm unable to send emails on any of my Apple devices. The revert is that I have exceeded the maximum number of emails per day, but I had only sent out 24 with no bulk emailing - (much less than 1000 recipients as per the website) and I'm STILL not able to send emails. Any advice on how to solve this?

I have asked a moderator to provide assistance, they will post an invite on this thread.
Once you get a reply, if you click on their name, you will see a screen like this. Click on the link as shown below.
Please do not send them a personal message, as they may not be on duty for a long time, and your message will not be tracked properly.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

How do I create a new apple store account when my phone tells me that I have exceeded the maximum limit on this phone

How do I create a new apple store account when my phone tells me that I have exceeded the maximum limit on this phone

http://support.apple.com/kb/HT4627

"You have reached the maximum number of free accounts activated on this iPhone"

I bought a used iphone 4s, and when i try to activate my icloud account, it shows mw thw followin message:
"Unable to start session - You have reached the maximum number of free accounts activated on this iphone"
Is there a solution?

Each device can only create three free iCloud accounts. Once these are created, you cannot create another account on that device. You can only re-use one of the accounts previously created, or create a new account to use on another iOS device (running iOS 5 or higher) or Mac (running OS X Lion or higher), if you have one.

I update my exchange server 2013 cu6 with exchange 2007 and my exchange 2013 db shutdown every 25 minute and recover. You have any hotfix I can use for this solution.

I update my exchange server 2013 cu6 with exchange 2007 and my exchange 2013 db shutdown every 25 minute and recover. You have any hotfix I can use for this solution.

Hi,
From your description, you have deployed Microsoft Exchange Server 2013 and Microsoft Exchange Server 2007 in a co-existence environment. After you upgrade to CU6, databases unexpectedly shut down. In your case, here is a kb for your reference.
Exchange Server 2013 databases unexpectedly fail over in a co-existence environment with Exchange Server 2007
http://support2.microsoft.com/kb/2997209
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

I am getting an error message for a GMail account that I may have exceeded the maximum number of connections but........

I changed the max. # of server connections to cache to one as recommended and am still unable to use this account. I also tried to flush my DNS cache but for some reason this also is not functioning. I am using a Macbook Pro. My Zoho account is still functioning normally with T'Bird so it makes me suspect it is a problem with Gmail and perhaps not T'Bird. Thoughts? Thank you.

using other iProduct which to not limit their connections to receive mail, like iPhones and iPads? Turn them off and all will be well.
Tools menu > account settings > server settings >advanced and you can edit the maximum connections Thunderbird will establish with an IMAP server.
Unfortunately the afore mentioned Apple products have no such setting, or at least my last foray into the apple support forums left me believing so. It makes their mail functions fast, but makes playing in the same sand pit as others much more difficult.
Gmail currently has a limit of 15 simultaneous IMAP connections per account. see https://support.google.com/mail/answer/97150?hl=en

Why do I keep getting the message "Unable to connect to Imap server you may have exceeded the maximum number of connections to this server.

I already tried reducing the maximum number of connections to 1, but I'm still receiving the message. Is there anything else I can do?
My computer is a Mac mini running OSX 10.9.5. Firefox is version 34.0.5.

Ok, IMAP server almost universally allow multiple connections. Thunderbird as you would have observed uses 5 if they are available. As Airmail suggested, iphones just use more and more until they exhaust the available connections. There is no set maximum option.
However there are other things that can consume connections and some may surprise you.
Anti spam tools such as mail washer
Anti virus programs in their anti spam or anti phishing roles
Web mail.
The wife sharing the same account on her laptop.
That is from the top of my head. So could any of those apply.

Was told that on a cruise ship you can bypass the ship and connect for $35 per month?

I was told that you can connect on a cruise ship for $35 per month. Not using the ship connection or incurring any fees from the ship. True??

goldcanyon2 wrote:
I was told that you can connect on a cruise ship for $35 per month. Not using the ship connection or incurring any fees from the ship. True??
What other connection are you thinking of using out in the middle of the ocean somewhere? Even if there were another ship somewhere within sight, it would still be too far to use it's connection. Sorry, you have no other choices but to use the ship connection and whatever fees they set. Now, bleach has a good suggestion, a cruise director or similar might be able to help you locate a reasonable plan for a connection.
Good luck.

Warning: you have exceeded the limit of 100 nested folders

in red letters in Disk Utility. Machine slows and slows. Where, how, why, and whence do these folders get nested? and how to unnest, which one doesnt know which they are or where they are, out of thousands of folders? No utility out there can help, it seems.
Jascha Kessler

I have the exact same problem. I have an iMac G3,
600MHz, 512MB RAM, 40 GB capacity, running 10.4.7. I
have been using Apple Macs since their innovation.
My computer is running a little slower, but I do not
know if "Nesting of folders has exceeded the
recommended limit of 100" is the culprit.
I use Photoshop (on 9.2.2) quite a lot, but otherwise
I use 10.4.7 all the time for everything else. I have
searched the Information pages and Discussion panels
for an explanation and solution, all to no avail.
Nothing dastardly appears to have happened or about
to happen to my computer, so I shall just keep on
using it regardless. In the meantime, however, I
shall keep looking for an explanation and I hope, a
solution.
iMac
Mac OS X (10.4.5) 600 MHz Power PC G 3 512 MB
SDRAM
thanks for your interest. I dont know what causes all those nested folders; but I am on 10.4.8 now and no change in (mis)behavior. I run a G4 with now with 1600 speed from a replaced heart or whatever, and have 1.25 G Ram.. I find that I can locate all Empty folders with Spring cleaning, and delete them and get the machine running better and normally. I also clean up regularly with DISK WARRION, which seems to be hecessary, as well as Drive Genius from ProSoft Engineering. Meanwhile, I buy lottery tix, in hopes of a later Mac Pro desktop
Jascha Kessler

I have searched the video and tutorials for this question.

I did a search on this question and came up with a big, fat zero.
I have some graphics of blank buttons. I want to add a submenu to one of my pages. I looked up "How to Add Text to a Blank Button" on the site where I got the button. Unfortunately, the only instructions I could find require me to write out some HTML coding. Now for my question. Is there a way to write code in Muse????????????????? Currently, I am preparing to re-download Dreamweaver CC. I hope I can set the button up there then save it and open the new product with Muse. If anyone has an easier suggestion, feel free to let me know. It could save me a lot of work. Thank you, in advance.
Sue

Thanks for your post.
I can understand the frustration when you can't find information, but I wanted to point out that using a generic subject such as this will reduce the likelyhood that you'll get a response as other customers will see it as vague and not follow up.
I think in this case what you would want to do is choose the Background Fill (click on "Fill" in the toolbar) item in muse and use this button image as the background for a text box or for a cell of a custom menu you have inserted. This way the text that makes up the text box/menu will float above the button.
If you want to go the HTML route, you can go to Object -> Insert HTML and insert HTML directly into your layout.
Cheers,
Justin

How do I save the password for a site for which I have chosen the "never remember password for this site" option?

The first time you enter a password for a site a box pops up under the address bar that has a picture of a key and then the question: "Remember this password?". In the drop box, I chose the option "Never Remember Password for This Site". I can't figure out how to change it so that the password IS remembered.

It sounds like the printer is still trying to retain the old network information.
Try a Hard Reset:
* Unplug printer while unit is turned on
* Unplug other end of power cord from the direct wall outlet
* Wait 30 seconds
* Plug unit back up for power
Reset Network information to Default:
* Press the Wrench/Setup menu button in the top right of the touch display of the printer
* Select the Wireless menu option
* Scroll down to Restore Network Defaults
After restoring the defaults, then try running the Wireless Setup Wizard. Let me know if the unit still does not retain the information.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

You have exceeded the maximum [1] connections for this session.

Similar Messages

Maybe you are looking for