You must supply a valid username and password to log onto the system.

hi,
i installed hyperion performance suite8.3 on linux by root account,during installation, i select "native" authentication, after installation, when i login the web interface by root account, it tell me:
You must supply a valid username and password to log onto the system.
who can help me?
thanks

Do you have any projects listed in Shared Services ?
... you are also using
Did you put in the right url when you did the HFM config ?
check the httpd.conf file for server name and listening port number ....
what port are you using to login to workspace ?

Similar Messages

You must supply a valid username and password in Hyp 11.1.1.3.0

HI,
We have successfully installed New version of Hyperion 11.1.1.3. Configuration is successfull. When running validation one error occurs.
We are unable to log in workspace as we are required to 'supply a valid username and password'. We log in as admin/password but this is not working.
When I change it is shared services console it does not solve this issue.
Can you please advice of what shall be done to get over this?
thank you
lubos

This is not the Hyperion/Essbase forum.

You must supply a valid User Name and Password to log onto the system

he installing Hyperion 9.3.1 on a server, I installed and tested successfully Shared Services, Essbase Administration Services, Essbase Server, Essbase Client ........ my problem is when installing Reporting and Analysis
Services and installed without problems UIServices in confuguratio utility comes a list of products to configure (Financial Reporting, Web Analysis Planning .... .... among others), first configure Financial Reporting and Web Analysis, when done reboot the machine, then wake up coughing the service entrance to http://localhost:45000/workspace, correspontiente and I get this message "you must supply a valid User Name and Password to log onto the system"
I need an urgent solution k and the above does not work until the time
or failing to address where we can solve this

Hi,
First of all really you should be going through the webserver plugin port if you want to access the other components through workspace.
e.g. http://localhost:19000/workspace
If you entering the correct login details and the account you are using is provisioned then you could check out what information is in the logs :- \Hyperion\logs\BIPlus\SharedServices_Security_Client.log
Cheers
John
http://john-goodwin.blogspot.com/

Re: Invalid username and password when logging onto Hyperion workspace

Hi,
I have installed Hyperion Reporting and Analysis services.When I attempt to log on to Workspace, I get the following message;
'You must supply a valid User Name and Password to log onto the system."
I have tried using the admin and password as username and password.I am able to login to Essbase Administration Services and User Management Console using this account.I have provisioned the user to Hyperion System 9 BI+ .
Thanks in advance.
-Sowmya

I was told that Dsun.net.inetaddr.ttl=0" is required to be passed to the web application server (JVM) that starts Hyperion Shared Services and all System 9 products that depend on Hyperion Shared Services
Is this correct? I see these errors in the log when I try to log into Workspace in the morning:
2010-03-24 08:26:03,509 [[ORB=_it_orb_id_1,Pool=1]::id-12] WARN com.hyperion.css.spi.impl.ldap.LDAPProvider.authenticate(Unknown Source) - javax.naming.ServiceUnavailableException: ldaps.lirr.org:636; socket closed; remaining name ''

Invalid User Name and Password when logging onto BPM Workspace (v9.3.1)

I have installed Hyperion Planning and the related/required products. When I attemp to log on to Workspace, I get the following message;
'You must supply a valid User Name and Password to log onto the system."
I have tried using the native 'admin' account, and an NTLM account that I have setup. Both of these accounts work for logging onto the the User Management Console and to the Essbase Administration Console, and I have provisioned both of them with full admin privileges.
Has anyone encountered this issue?
Thanks,
-K

Thank you all for the responses so far.
On the first response, I had already provisioned an NTLM user that is a member of the local Administrators group with all administrative roles, and also refreshed security in EAS prior to submitting this inquiry, so that did not solve the problem.
On the second, I cannot navigate to ../workspace/browse/configinfo without logging in so I am unable to review this information.
On the third response, where do you provision the user to BI+? If I open the User Management Console, there are four root roles each with a tree underneath: APS 9.3.1 Server, Analytic Servers, Business Rules, and Hyperion Shared Services. Under each tree, I have provisioned the 'admin' user and the NTLM user for all roles, including Administrator, Dimension Editor and Application Creator under Hyperion Shared Services -> Global Roles. Should there be a BI+ tree? If so, it is not appearing on the list.
Thanks for any additional info anyone can provide.
-Ken

Admin Console - Admin user requires valid username and password

I am running FMIS4.5 on CentOS5.5
FMIS is running and I can connect via Flash Media Encoder.
Web displays and admin console :1111 gives xml output, however
When using the user & password in my xml files to login (testing with ping), I get the "Admin user requires valid username and password" error.
conf/fms.ini:
# fms.ini contains substitution variables for Flash Media Server          #
# configuration files. Lines beginning with '#' are considered comments. #
# A substitution variable is in the form <name>=<value>. Everything up to #
# the first '=' is considered the name of the substitution variable, and #
# everything after the first '=' is considered the substitution value. If #
# you want a substitution variable to have leading or trailing spaces,    #
# enclose the value around double quotes. For example, foo=" bar "        #
# This section contains configurable parameters in Server.xml #
# Username for server admin
# For example:
#    SERVER.ADMIN_USERNAME = foo
SERVER.ADMIN_USERNAME = Admin
SERVER.ADMIN_PASSWORD = str34m1ng
# IP address and port Flash Media Admin Server should listen on
# For example:
#    SERVER.ADMINSERVER_HOSTPORT = :1111
SERVER.ADMINSERVER_HOSTPORT = :1111
# User id in which to run the process (Linux Only)
# For example:
#    SERVER.PROCESS_UID = 500
SERVER.PROCESS_UID = 500
# Group id in which to run the process (Linux Only)
# For example:
#    SERVER.PROCESS_GID = 500
SERVER.PROCESS_GID = 500
# License key for Flash Media Server
# For example:
#    SERVER.LICENSEINFO = XXXX-XXXX-XXXX-XXXX-XXXX-XXXX
SERVER.LICENSEINFO = #SORRY YOU DON'T GET TO SEE THIS#
# LIVE_DIR denotes the full path of sample "Live" application's
# folder for storing any live stream recorded by server.
# For example:
#    LIVE_DIR = <FMS_Installation_Dir>\applications\live
LIVE_DIR = /opt/adobe/fms/applications/live
# VOD_COMMON_DIR denotes the full path of sample "VOD" application's
# folder for storing onDemand and Progressive Download .flv/.mp3 files.
# File stored in this folder can be streamed and are also PD-able.
# Note : If you are using the default installation of Apache as a webserver,
# and if you modify VOD_COMMON_DIR, please change the document root
# accordingly in httpd.conf.
# For example:
#    VOD_COMMON_DIR = <FMS_Installation_Dir>\webroot\vod
VOD_COMMON_DIR = /opt/adobe/fms/webroot/vod
# VOD_DIR denotes the full path of sample "VOD" application's
# folder for storing onDemand only .flv/.mp3 files. Files stored in
# this folder are not PD-able
# For example:
#    VOD_DIR = <FMS_Installation_Dir>\applications\vod\media
VOD_DIR = /opt/adobe/fms/applications/vod/media
# The maximum size of the FLV cache, in megabytes.
# The default is 500MB.
SERVER.FLVCACHE_MAXSIZE=500
# Whether to start and stop the included HTTP server along
# with FMS.
SERVER.HTTPD_ENABLED = true
# This section contains configurable parameters in Adaptor.xml #
# Application directory for the virtual host
# For example:
#    VHOST.APPSDIR = C:\myapps
VHOST.APPSDIR = /opt/adobe/fms/applications
VHOST.ALLOW = all
# This section contains configurable parameters in Application.xml #
# List of semi-colon delimited paths in which to search for script to load
# For example:
#    APP.JS_SCRIPTLIBPATH = C:\scripts;C:\Program Files\Foo\scripts
APP.JS_SCRIPTLIBPATH = /opt/adobe/fms/scriptlib
# This section contains configurable parameters in Logger.xml #
LOGGER.LOGDIR =
# This section contains configurable parameters in Users.xml #
# Enable or disable using HTTP requests to execute admin commands.
# Set to "true" to enable, otherwise it will be disabled. The
# actual commands permitted for server admin and virtual host admin
# users can be set in Users.xml.
USERS.HTTPCOMMAND_ALLOW = true
Users.xml:
<Root>
    <UserList>
        
        <User name="${SERVER.ADMIN_USERNAME}">
            
            <Password encrypt="false">${SERVER.ADMIN_PASSWORD}</Password>
            
            
            
            
            
            <Allow>All</Allow>
            
            
            
            
            
            <Deny></Deny>
            
            
            
            
            <Order>Allow,Deny</Order>
        </User>
        <User name="janedoe">
                <Password encrypt="false">S4mpl3P4ss</Password>
                <Allow></Allow>
                <Deny></Deny>
                <Order>Allow,Deny</Order>
        </User>
    </UserList>
    <AdminServer>
        <HTTPCommands>
            
            
            
            
            
            
            
            <Allow>ping</Allow>
            
            
            
            <Deny>All</Deny>
            
            
            
            
            
            <Order>Deny,Allow</Order>
        </HTTPCommands>
    </AdminServer>
</Root>
Output on :1111/admin/ping?auser=Admin&apswd=str34m1ng :
<result>
<level>error</level>
     <code>NetConnection.Connect.Rejected</code>
     <description>Admin user requires valid username and password.</description>
     <timestamp>Thu 17 May 2012 11:33:43 AM EDT</timestamp>
</result>
Connections do not work from both localhost and external connections and the fms_adminConsole.htm (.swf) fails as well.
Any assistance is appreciated!

Hi,
FMIS 4.5 does not accept plain text password. Encrypt=false is no longer supported. See here for more information : http://help.adobe.com/en_US/flashmediaserver/configadmin/WS5b3ccc516d4fbf351e63e3d119f2926 bcf-7fed.html#WS5b3ccc516d4fbf351e63e3d119f2926bcf-7e91
The value for SERVER.ADMIN_PASSWORD needs to be the encrypted string for your password. That should solve your problem.
Hope this helps.
Thanks,
Apurva

Email send/receive suddenly doesn't work ; can't change email settings as BB phone won't accept valid username and password -- what to do?

email send/receive suddenly doesn't work (as of September 24th); I can't change email settings (one suggestion from tech) as BB phone won't accept *valid* username and password -- what to do?
I understand from a support note that if I keep trying my password/username combination, my BB will eventually delete all data!
I can't understand this. I'm completely lost now. I can't remember what I've done or tried to do. A plethora of usernames and passwords is swimming in my head.
Thanks for any hints. I have always loved this BB Bold and have never had any trouble with it.

But the real question is why for the past year did the passwords work and then all of the sudden after this anomaly the disk password doesn't work? I'm not 100% sure of what my configuration was, but I know that most of the time it required one password -- supervisor, and occasionally it asked for 2 -- disk password as well I believe. This may have been related to the Password on Restart setting I think -- asking for the disk password on cold vs. warm boot. But I know both were exactly the same. But after this incident only the Supervisor password worked.

Help with "Admin user requires valid username and password" on fms2_console.swf page

Just installed FMS2 on Debian (etch, 2.16.5-1 kernel). When I
connect to localhost:1111/fms2_console.swf and get the infamous XML
output which includes the text, "Admin user requires valid username
and password." The *.xml and *.ini files haven't been touched after
installation. All four daemons (fmsedge, fmsmaster, fmscore,
fmsadmin) are running and listening on the correct ports.
Any tips? (I'm sure this is easy to solve...)
Thanks.

Hi,
FMIS 4.5 does not accept plain text password. Encrypt=false is no longer supported. See here for more information : http://help.adobe.com/en_US/flashmediaserver/configadmin/WS5b3ccc516d4fbf351e63e3d119f2926 bcf-7fed.html#WS5b3ccc516d4fbf351e63e3d119f2926bcf-7e91
The value for SERVER.ADMIN_PASSWORD needs to be the encrypted string for your password. That should solve your problem.
Hope this helps.
Thanks,
Apurva

Ical "authentication failed. your username and password were rejected by the server"

i've a pretty busy server, fully configured with correct DNS.
running 10.6.8, uptodate. i've stopped the ical service, and removed it from the server settings.
then i created a folder on my RAID /volumes/raid/ical, set its ownership to _calendar:_calendar (uid 93), rwx,rx,-
then added the iCal service back, and set the data store to this new folder.
authentication is set to digest (to reduce potential kerberos errors), with SSL on.
i then started the service
an existing user CANNOT connect to the caldav server. i get the error: ical "authentication failed. your username and password were rejected by the server".
if i create a NEW user, that user can correctly connect to the Caldav server. On first joining, an entry is created in the __uids__ folder and the calender works.
SO. WHAT IS GOING ON?
this is 10.6, so i do not have an option in WGM to 'enable calendering'. i've used the inspector to check for differences, but i can't see any.
help. please. and no comments about DNS. the fact i can get a new user to function means that is excluded. no comments about SSL. ditto. no comments about kerberos, its turned off. thanks.

I often think of things in terms of time it takes to figure out the solution to the problem vs time it takes to nuke and pave.
Dare I ask... How many users would you have to remake?
150 users would probably take 2 hours to recreate?
...Have you spent 2 hours on this problem yet? How about 4 or 6?
Perhaps you could have typed up 450 remade users so far!
I have a great idea as to how to change ownership of home folders to users after they're created.
Thoughts on the problem... (but don't spend too much time on it!)
What about crypt vs open directory password?
In WGM, select the user, click the advanced tab, and ensure that your users have OD based passwords?
...sometimes that pull-down menu displays OD, but it's not really. Try selecting OD, retype the password there, and save.
See if it works.
What about in server admin.... Select the server in question, click the access button at the top.
Ensure that your services are allowed for all users to use the iCal service.
In the iCal service in Server Admin...
Host name setting? It's a stretch as new users seem to work. Ensure it's correct?
For the sake of argument... Change authentication type to Any Method... If you're running OD on the server, Kerberos is running. I know that certain services require it even though you have the option. Perhaps iCal is being finiky without it?
I apologize if you've tried all these, but as a user forum, you'll typically get users that don't believe that you've tried the basics. It's honestly the best place to start. Seeing as we don't know what you've done, it's the best advice you'll get.
HTH
-Graham

What are the username and password when i click the ICM of JavaEE5@SAP

when i click the ICM of JavaEE5@SAP in the sapmanagement console mmc, It need i input the username and password for Web_admin, What are the username and password when i click the ICM of JavaEE5@SAP and which tools act the role as the VisualAdministrator of NetWeaver04s and NetWeaver2004s?
thank you very much

Hello Guoging,
you can login to ICM with username Administrator and password abc123. That is described in the start.html file, which you can find in the unzipped Downloadpackage of SAP NetWeaver Java EE 5 Edition.
You can use NetWeaverAdministrator(NWA) or config tool to configure this edition. NWA
needs to be installed separately. If you have a default installation, go to
C:SAPJP1JC00j2eeNWAdmin and execute the file install.bat. Ensure that NetWeaver is running, enter user Administrator und the Masterpassword you chose during installation and wait around 20 Minutes or more. NWA is started automatically after installation has finished in your webbrowser.
For more information on NWA read the Administrationguide
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/806e75a0-0e01-0010-2587-fc518de8ac1a">Administration Guide</a>

My firefox on my lap top (with windows 7) cannot open a website with a username and password, without first clearing the history ? my other computer has windows xp and it works fine.

My firefox on my lap top (with windows 7) cannot login to my e mail website with a username and password, without first clearing the history ? my other computer has windows xp and it works fine.

I simply reinstalled fire fox 3.6.19 and I can login no problem. Seems like it could be a compatability problem between 5.0 and windows 7. One other thing that happened often was lag while playing mmorpg games. Not sure if this fixed it or not, but I can update this thread when i find out.
Thank you to who ever provided the link to the older fire fox downloads page in another question thread.

How to connect an apple tv to an enterprise network with a username and a password? I need to use it over my university's wifi. theres no option to enter username and password. how to connect the apple tv to such enterprise network?

How to connect an apple tv to an enterprise network with a username and a password?
I need to use it over my university's wifi. theres no option to enter username and password. how to connect the apple tv to such enterprise network?

Contact the University's IT dept, they may be able to set something up on the network to allow the ATV to connect without the need for a user name/password.

HT4623 When I joined my wireless network I set authentication required to on and di not eneter a username or password. I then went into safari and as requested entered my username and password. Now,however the iPod is remembering my credentials. How do

When I joined my wireless network I set authentication required to on and di not eneter a username or password. I then went into safari and as requested entered my username and password. Now,however the iPod is remembering my credentials. How do I clear my credentials?

Go to Settings>Safari and Clear History, Cookies and Data
Also go to Settings>Safari>AutoFill and Make sure that Names and Passwords are OFF and Clear All.

Remote DVR Hates Me - Continues To Reject Valid Username And Password

Hi all,
I mistakenly posted this message in the programming forum by mistake, so I'm moving it here now (sorry about that):
For the past few days, I've been unable to login to the Verizon remote DVR from both my iPhone and the web. It had been working fine for months, then all of a sudden, when I try to login, I get the dreaded 'login failed. please try again."
My Username and Password still work fine for Verizon Central, but for some reason the remote DVR login page won't recognize them. I tried re-registering my username and password, but that didn't work. I don't have any periods (or other weird characters) in my username. And as I mentioned, it had been working fine for months and months. Very frustrating.
I called tech support. They couldn't help (seemed baffled and ill equipped to solve this type of problem). The rep told me that Verizon was having some trouble with remote DVR (yet he had NO information about what the problem was or if there was a fix in the works). Is this true, Verizon? Is there an internal issue? He said he was going to connect me to someone who could tell me more. I said great. Then he connects me and I get a recording that says, "you've reached a non-working number in the Verizon system ..." NICE!
Is anyone else out here having trouble logging in to their remote DVR?
One thing I noticed, the login page looks different. There used to be 2 radio buttons: one for ".com" and one for ".net." I don't see those any more. I wonder if that's part of the problem.
I appreciate any help. Thanks everyone. And again, sorry for the double post.

Hi Guys,
Thanks for taking the time to reply.
TROYH72: Yes, I'm painfully aware that the "http://m.verizon.com/tv" url is for mobile devices. It used to work fine on my iphone, but it no longer does. It constantly rejects my username and password (which are both valid). FYI, that same url used to work from my computer as well.
PJL: Thanks for your suggestion. I tried deleting the cookies and clearing the browser cache. No luck. I really think this is a problem on Verizon's end for a couple of reasons:
1. The login page looks different to me now. As I mentioned, there used to be radio buttons for .com and .net. Those are gone.
2. I have the same problem logging on from my computer as I do from the iphone. Seems odd.
3. I can log in to "http://www36.verizon.com/fiostv/web/," and some other Verizon urls, but I can't access my DVR once I'm logged in. The only way I can access my DVR remotely is to log in through "verizon.com" and do it the roundabout way. But as I mentioned in a previous post, that's really cumbersome from a mobile device.
4. Maybe most importantly, the remote DVR used to work perfectly! And now it doesn't work at all on my iphone ("Login failed. Please try again.") And it's wonky from the web. And I haven't changed anything on my end.
Maybe it's a Mac thing. I'm running Macs as well as an iphone. I know that sometimes, Verizon and Macs don't play nicely together. I'm at a loss. And it doesn't look my Ticket is making any headway.

Lost my username and password to log into print and share on my printer

i cant access my eprint and share on my printer hp envy 5532. i have forgotten my username and password.
This question was solved.
View Solution.

Hello scoobby,
Welcome to the HP Support Forums!
I understand that you are trying to log into the ePrint and Share app that is installed on your ENVY 5532. I suggest that you log into your HPConnected account, delete and re-install the app. Doing this should prompt to assign new login information. Once uninstalled, restart the printer before re-installing the app.
Let me know the out come, cheers!
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

You must supply a valid username and password to log onto the system.

Similar Messages

Maybe you are looking for