You Prompted to me update itunes....your updates failed and now won't open at all

Nsvcr80.dll is missing....and Error 7 Window Error 126....please reinstall itunes...are you freaking kidding me!!!!!!!!!!!!!!!!!!! Have you just lost all my playlists, video's and work over the past several years????????????????
All I did was follow your updates and install now window!
How is it that itunes doesn't pop up with a quick link to the correct their error!
So now what? Please advise.

Yes, I know King-Penguin....I'm just so frustrated and in a panic, that I was hoping the itunes geeks that sent out this falilure of an update would still see it, and feel bad. And maybe even send out a quick link fix it botton. Guess that's just a newbie way of thinking!
Thank you for the reply with the fix it suggestions....I'm feeling a little less paniced now. I really appreciate your response.
I assume from reading some of the posts that all the songs etc won't be lost when I reinstall?

Similar Messages

  • Updated Xperia Z on Pc companion, failed and now won't open! PLEASE HELP!

    I flashed my phone months ago but now I just wanted to upgrade it to Lollipop or what ever is the latest update for my phone but the problem was during update, the PC companion suddenly stopped. Said it had errors, and would not go any further so I removed my phone from being connected to the PC and now it won't open.  How can I make it work again? or at least can I still get the data inside? Please help this is a very heart breaking event. Important memories are inside my phone

    Hi,
    If I understand you correctly, the phone won't even power on now? No reaction while you hold the ON/OFF button? If that's the case, you will unfortunately not be able to backup any data.
    With PC Companion you can perform a software repair. In PC Companion you press start on Support Zone > Start on Update the phone/tablet software > Repair phone/tablet (the blue clickable link in the message) > Follow these steps without having your device connected to the PC.
    Follow the instruction that appears in the program and do not connect your device until this guide tells you how to connect it.

  • Itunes installed, wouldn't restart properly, and now won't open at all.

    I updated ITunes today (I have Vista) and it seemed to download fine.  When I restarted my computer to finish the install, my computer would not reboot.  I had to sut-it down manually.  I had to go back-up and restore my computer to get it to boot up.  Not ITunes will not open.  Do I need to reinstall it, and if so, will I lose my content if I do.
    Thanks!

    I started to have issues with itunes when itunes 7.3 came out. Now that I have itunes 7.5, I can not even open it up. It seems that when I click on it, the itunes icon changes for a few seconds to an unrecognized program. I don't know what to do. Any advice?

  • My iphone 5g was closed through updated it and now i cannot open it through power also through iTunes when connected it on computer. i cannot know what i do ?

    hi dear
    my iphone 5g was closed through updated it and now i cannot open it through power also through iTunes when connected it on computer. i cannot know what i do ?

    Hello alaa_altaiy1979
    Start with the article below to see if you can get it to power on and working again.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    Regards,
    -Norm G.

  • Help i have updated my ipod touch to 4.3.3 and itunes to 10.3 and now it wont open on my pc  i can access apps but no music as it cant sync help! itunes wont open at all or reconise the ipod

    help i have updated my ipod touch to 4.3.3 and itunes to 10.3 and now it wont open on my pc  i can access apps but no music as it cant sync help! itunes wont open at all or reconise the ipod

    Try to remove all Apple related software and then reinstall iTunes Removing iTunes, QuickTime, and other software components for Windows Vista

  • I tried to update to the most recent itunes, but the update failed and now when I try to open itunes a dialog box pops up and tells me that it can.t open because MSVCR80.dll is missing.  I need help!

    I tried to update to the most recent version of itunes but the update failed.  Now when I try to open itunes I get a dialog box telling me it can,t open because MSVCR80.dll is missing.  I tried uninstalling and reinstalling itunes but I grt the same message.  What can I do to fix this?

    Solving MSVCR80 issue and Windows iTunes install issues.
    Thanks to user turingtest2 for this solution.
    Solving MSVCR80 issue and Windows iTunes install issues.
    If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    You may be required to boot into safe mode to complete the folder deletion process.

  • Iphone update failed and now it's not recognized in itune at all

    itune prompted the latest update. 4.3.x (not sure)... so I follow the prompt and did the latest update...
    Well, it failed to update correctly and now my phone is not working at all. All I see on the phone is the itune icon with the USB port connection image on it...
    itune won't recognize the phone on it's device list either.
    this is very frustrating... it happen to me last year with the first iphone4 i had and it's now happening again after the second one...
    HELP!!

    Hi,
    See These Links:
    http://support.apple.com/kb/HT1808
    Device Not Recognised
    For PC
    http://support.apple.com/kb/TS1538
    Device Frozen
    http://support.apple.com/kb/ts1445

  • Itouch crashed when updating ios6 and now won't restore

    My itouch crashed when updating to ios6 and now won't restore! Getting an error code (14). Any ideas?

    Error 13, 14, 35 and 50 (or -50)
    These errors are typically resolved by performing one or more of the steps listed below:
    Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
    Put a USB 2.0 hub between the device and the computer.
    Try a different USB 30-pin dock-connector cable.
    Eliminate third-party security software conflicts.
    There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
    Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
    Try to restore from another known-good computer and network.
    http://support.apple.com/kb/TS3694#error14

  • During an update to my i tunes the update failed and now I can't access my i tunes and my laptop where it was stored states an error message MSVCR80.dll , then a further error 7 windows 126 messagee

    Please can anyone help? tried to update my itunes and now can not access at all and now have error message cant access as  file MSVCR80.dll is missing from computer and then a further message error 7 (windows 126) . laptop and i tunes working perfectly before the update. I have tried unstalling the itunes programme and re installing but still the same error message .
    both my i pads and i pods are still ok its just the i tunes.

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • HP laptop update failed, and now it wont stop undoing changes.

    When I went on my laptop today it started updating, and after an hour when it finally got to 99% it said they the update failed, and it's now undoing changes. It's been like that for over 3 hours now. How can I try to fix this?

    You can try getting to Advance Boot Menu by 
    1. Repeatly pressing f8when the laptop boot up (Disable FASTBOOT when you are tyring to get into Advance boot menu)
    2.Shift and F8 (When the first options doesn't help at all )
    then use the Keyboard arrow keys to navigate around Advance boot menu and select Last known good boot configration or restore this PC (Please be minded that if you choose restoring it will restore to a back to the last known backup , as data will be lost ) 
    Please update here if there is still any problems

  • My update failed and now my phone is frozen with the apple symbol

    I was updating my iPhone and it failed and now my phone is frozen with the Apple Icon.  It wont turn off or anything

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • Installed iTunes 7.1.1 and now won't play any CD/DVD

    help!! i installed itunes 7.1.1 and now i can't play any CD/DVD, even the data ones. what should i do?? when i run CD diagnostics it shows up like this:
    Microsoft Windows XP Professional Service Pack 2, v.2055 (Build 2600)
    System manufacturer System Product Name
    iTunes 7.1.1.5
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.2
    LowerFilters: PxHelp20 (2.0.0.0),
    UpperFilters: GEARAspiWDM (2.0.6.1),
    Current user is an administrator.
    Video Display Information:
    SiS 661FX
    Connected Device Information:
    DiskDrive, ST3802110A, Bus Type ATA, Bus Address [0,0]
    CDROM, TSSTcorp CDW/DVD SH-M522C, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    E: TSSTcorp CDW/DVD SH-M522C, Rev TS06
    Drive is empty.
    The last failed audio CD burn had error code -128(0xffffff80). It happened on drive E: TSSTcorp CDW/DVD SH-M522C on -128(0xffffff80) media at speed 0X.

    the motherboard is ASUS P5S800-VM
    thank you kindly.
    i find it a bit difficult to track down info for the ASUS motherboards at ASUSTek. so perhaps try using their ASUS Navigation utility to determine if there are any BIOS or chipset driver upgrades available for that model. here's a link through to their download site for the utility:
    ASUS Navigation Wizard
    if you still get the bad behavior from CD/DVD drives after doing any updates indicated at Asus, let's check on your other componentry too.
    i had a look at Samsung, and there's a newer TS07 firmware available for your SH-M522C.
    TSSTcorp SH-M522C
    is that any help?

  • Hi i reinstalled my itunes software after it refused to reconise my ipod and now it wont open at all as the libary couldn't be found need help?

    Hi i reinstalled my itunes software after it refused ro reconise my ipod and now it won't open at all as it says the libary can't be opened as it could'nt be founf. need help please?

    Try to remove all Apple related software and then reinstall iTunes Removing iTunes, QuickTime, and other software components for Windows Vista

  • Itunes update stopped and now can't open

    I downloaded the latest version of itunes and whilst in the middle it stopped (not sure if this may have been my fault!!). Anyway itunes won't open. I've tried reinstalling and when i do so it doesn't work as it says i need to be logged in as an administrator which i am as i am the only user for my laptop.
    real-time player still works fine though. I have also tried to uninstall itunes via control panel but it doesn't show as a program anymore.
    Can anybody help??
    Thanks
    C

    I don't know about a couple hundred -- that sounds excessive -- but we all get those Java repairs whenever repairing Permissions.
    http://support.apple.com/kb/TS1448?viewlocale=en_US
    You might want to see if running Applejack will help. Be sure to do the underlined. Some of this will be redundant, since you've already done Permissions repair. But no harm.
    Download:
    http://sourceforge.net/projects/applejack/
    Article on using:
    http://reviews.cnet.com/8301-13727_7-10334620-263.html?tag=mfiredir
    It runs in single user mode, where it runs more safely than other maintenance/cleaning programs because there is less chance of interference from the OS. After installing (you won't see it in the Applications Folder) hold CMD-S at startup. You will get a black screen with MS-DOS like text. Just follow the prompts: type in "applejack AUTO" and it will run through the following:
    Correct any Disk problems.
    Repair Permissions.
    Clear out Cache Files.
    Repair/check several plist files.
    Dump the VM files for a fresh start.
    Trash old Log files.
    You can also run tasks selectively and for specific users by typing in "applejack." After running in "AUTO,"  you can go back and run it again as "applejack," steps 3 & 4 only, for your user.
    The first reboot will take much longer than usual, as it rebuilds caches. It may take several restarts to see the benefits. Because of the deep cache cleaning in AUTO mode some applications may tell you they are being opened for the first time.
    NOT YET UPDATED FOR LION (although it is reported by some that it is working)
    (Adapted from post by BDAqua)

  • I updated itunes on my mac and now it wont open

    In response to prompt to update itunes version I downloaded and installed an updated version. Now I tunes won't open at all

    Make sure this isn't a problem with an older app that you used with iTunes, try the steps here -> iTunes: Troubleshooting issues with third-party iTunes plug-ins

Maybe you are looking for