Your server does not have PHP installed, or PHP is turned off error.
I am trying to install WordPress from a download and keep on getting this error message Error: PHP is not running. What can I do.
Its your Server Error, Not firefox issue.
If your trying to install the wordpress locally, use WAMP server
If your installing in your server or hosted server, contact the admin
Similar Messages
-
I dont know, if this is placed under the right category, but I really am a dummie about this!
please if anyone could provide a simple answer.
thank you!That file might have moved to a different location on the server. I think you'll need to check with RefWorks support or your local IT department on why the install page links do not work.
-
Terminal server does not have any installed licenses
Good morning! Faced with a some trouble while configuring Terminal Server (Windows Server 2012 based). I selected licensing mode "Per User" and now I see this message:
“The Remote Desktop Session Host server is in Per User licensing mode and No Redirector Mode, but license server “server name” does not have any installed licenses with the following attributes:
Product version: Windows Server 2008 or Windows Server 2008 R2
Licensing mode: Per User
License type: RDS CALs”
So this is trial using of terminal server - I have 25 days yet but already today I can't connect to server using RDP. There is an error message about absent licensing server. How can I activate licenses in trial mode? Thank you for support.Hi,
Thank you for posting in Windows Server Forum.
From the error description it seems that your issue caused by setting up different Licensing mode. We need to install the proper RDS CAL on the License server. If the license server has installed licenses of the other mode, changing the licensing mode
for the terminal server may also resolve the issue.
To change the Licensing mode we can use RD Licensing diagnoser or by PowerShell command.
To change the licensing mode on RDSH/RDVH:
$obj = gwmi -namespace "Root/CIMV2/TerminalServices" Win32_TerminalServiceSetting
$obj.ChangeMode(value) - Value can be 2 - per Device, 4 - Per user
Please refer below article for information.
RD Licensing Configuration on Windows Server 2012
http://blogs.technet.com/b/askperf/archive/2013/09/20/rd-licensing-configuration-on-windows-server-2012.aspx
Have you installed License server on Server 2012 and you have RDS CAL of Server 2008 R2?
If that’s the case then first you need to purchase the RDS CAL for server 2012 and then you can configure on server 2012 because server 2012\R2 RDS CAL can work with lower version OS but Server 2008 R2 RDS CAL can’t work on Server 2012\R2.
Please check computability matrix.
RDS and TS CAL Interoperability Matrix
http://social.technet.microsoft.com/wiki/contents/articles/14988.rds-and-ts-cal-interoperability-matrix.aspx
Hope it helps!
Thanks.
Dharmesh Solanki -
Your Device Does Not Have Flash Installed
Somehow Flash is no longer on my pc and three attempts to download and install flash haven't worked.
http://forums.adobe.com/thread/1195540
-
Hi All,
This is my first post to ms exchange forum am getting Log onto incoming mail server (POP3): Your server does not support the connection encryption type you have specified. Try changing the encryption method. Contact your mail server administrator
or Internet service provider (ISP) for additional assistance. in my outlook clients, till last Sunday (12.04.15) my exchange was well & good, Monday morning suddenly the problem started like none of our outlook pop3 clients are able to communicate
with exchange (rest IMAP, SMTP & Exchange accounts are working fine). i have tried with all port no but no luck. please help me to get raid of this one.
Exchange 2013 CU6 with server 2012 Std 64Bit
Thanks,
MuraliDear All,
I have found the solution for above problem, the problem has occur due to PopProxy inactivity
please find relevant exchange management shell commends below.
1. Get-ServerComponentstate -Identity <yourmailserver.com>
Server Component State
yourmailserver.com ServerWideOffline Active
yourmailserver.com HubTransport Active
yourmailserver.com FrontendTransport Active
yourmailserver.com Monitoring Active
yourmailserver.com RecoveryActionsEnabled Active
yourmailserver.com AutoDiscoverProxy Active
yourmailserver.com ActiveSyncProxy Active
yourmailserver.com EcpProxy Active
yourmailserver.com EwsProxy Active
yourmailserver.com ImapProxy Active
yourmailserver.com OabProxy Active
yourmailserver.com OwaProxy Active
yourmailserver.com PopProxy Inactive
yourmailserver.com PushNotificationsProxy Active
yourmailserver.com RpsProxy Active
yourmailserver.com RwsProxy Active
yourmailserver.com RpcProxy Active
yourmailserver.com UMCallRouter Active
yourmailserver.com XropProxy Active
yourmailserver.com HttpProxyAvailabilityGroup Active
yourmailserver.com ForwardSyncDaemon Active
yourmailserver.com ProvisioningRps Active
yourmailserver.com MapiProxy Active
yourmailserver.com EdgeTransport Active
yourmailserver.com HighAvailability Active
yourmailserver.com SharedCache Active
2. Set-ServerComponentState -Identity <yourmailserver.com> -Component PopProxy -Requester HealthAPI
-State Active
3. Get-ServerComponentstate -Identity <yourmailserver.com>
Server Component State
yourmailserver.com ServerWideOffline Active
yourmailserver.com HubTransport Active
yourmailserver.com FrontendTransport Active
yourmailserver.com Monitoring Active
yourmailserver.com RecoveryActionsEnabled Active
yourmailserver.com AutoDiscoverProxy Active
yourmailserver.com ActiveSyncProxy Active
yourmailserver.com EcpProxy Active
yourmailserver.com EwsProxy Active
yourmailserver.com ImapProxy Active
yourmailserver.com OabProxy Active
yourmailserver.com OwaProxy Active
yourmailserver.com PopProxy Active
yourmailserver.com PushNotificationsProxy Active
yourmailserver.com RpsProxy Active
yourmailserver.com RwsProxy Active
yourmailserver.com RpcProxy Active
yourmailserver.com UMCallRouter Active
yourmailserver.com XropProxy Active
yourmailserver.com HttpProxyAvailabilityGroup Active
yourmailserver.com ForwardSyncDaemon Active
yourmailserver.com ProvisioningRps Active
yourmailserver.com MapiProxy Active
yourmailserver.com EdgeTransport Active
yourmailserver.com HighAvailability Active
yourmailserver.com SharedCache Activ
Replace yourmailserver.com with your server host name.
Thanks -
When I try to log on to my DC it says "The security database on the server does not have a computer account for this workstation trust relationship". It won't let me log on. I installed another server server 2012r2 (its virtual )
and I can get to ADSI edit.
I think what happened was I had a pc that could not connect without unplugging the network cable. So I found this fix
FIX: “The security database on the server does not have a computer account for this workstation trust relationship”2032011
I’ve seen a lot of solutions, or suggestions rather, with regard to the error in the title of this post. In my experience, the problem can almost always be resolved without extra domain add/removes and reboots, which is the most prevalent solution I have
seen around. Usually, this issue is due to a mismatch between attributes of the computer account in Active Directory and those values on the system itself. Here are the steps I take to fix this issue when it crops up:
Open up Active Directory Users & Computers pointed to the domain the computer account resides in
From the “View” pull-down menu, make sure that “Advanced Features” is checked
Navigate to the part of your organizational unit (OU) structure where the computer account for this server resides
Open the Properties for the computer object
Choose the “Attribute Editor” tab on the Properties dialog box
Check the Attributes dNSHostName & servicePrincipalName – anywhere that a fully qualified hostname is specified (e.g. myserver.mydomainname.com), make sure that the entry matches the hostname
you have configured when you go here on your server: Start -> Computer -> Right-Click, Properties -> Change Settings (under “Computer name, domain… settings”) -> Full Computer Name
As an example, for a fictitious W2K8 R2 server whose Full Computer Name is “srv1.mydomainname.com”, these attribute/value pairs should be in Active Directory:
dNSHostName:
srv1.mydomainname.com
servicePrincipalName:
HOST/SRV1
HOST/srv1.mydomainname.com
RestrictedKrbHost/SRV1
RestrictedKrbHost/srv1.mydomainname.com
TERMSRV/SRV1
TERMSRV/srv1.mydomainname.com"
Not reading it carefully I add a computer with the same name as the pc having the issue and followed the above. The problem is that I did not notice that the spn did not want the name of my server (serv1) but the name of the trouble
pc.
dcdiag output
PS C:\Users\administrator.TOM> dcdiag.exe
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
***Error: DC3 is not a Directory Server. Must specify /s:<Directory Server> or /n:<Naming Context> or nothing to
use the local machine.
ERROR: Could not find home server.
PS C:\Users\administrator.TOM> dcdiag.exe /s:DC2
Directory Server Diagnosis
Performing initial setup:
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site\DC2
Starting test: Connectivity
The host 9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM could not be resolved to an IP address. Check the DN
server, DHCP, server name, etc.
Neither the the server name (DC2.TOM) nor the Guid DNS name (9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM)
could be resolved by DNS. Check that the server is up and is registered correctly with the DNS server.
Got error while checking LDAP and RPC connectivity. Please check your firewall settings.
......................... DC2 failed test Connectivity
Doing primary tests
Testing server: Default-First-Site\DC2
Skipping all tests, because server DC2 is not responding to directory service requests.
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : TOM
Starting test: CheckSDRefDom
......................... TOM passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... TOM passed test CrossRefValidation
Running enterprise tests on : TOM
Starting test: LocatorCheck
......................... TOM passed test LocatorCheck
Starting test: Intersite
......................... TOM passed test Intersite
PS C:\Users\administrator.TOM> regsvr32 schmmgmt.dll
PS C:\Users\administrator.TOM> netdig /fix
netdig : The term 'netdig' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ netdig /fix
+ ~~~~~~
+ CategoryInfo : ObjectNotFound: (netdig:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> Setup /PrepareSchema
Setup : The term 'Setup' is not recognized as the name of a cmdlet, function, script file, or operable program. Check
the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ Setup /PrepareSchema
+ ~~~~~
+ CategoryInfo : ObjectNotFound: (Setup:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> netdiag /test
netdiag : The term 'netdiag' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ netdiag /test
+ ~~~~~~~
+ CategoryInfo : ObjectNotFound: (netdiag:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> nslooup
nslooup : The term 'nslooup' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ nslooup
+ ~~~~~~~
+ CategoryInfo : ObjectNotFound: (nslooup:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM>Ok fixed.
At a elevated cmd prompt run ;
C:\Users\administrator.TOM>setspn -x
As you can see the DC serv1 had duplicate SPNs.
Checking domain DC=TOM
Processing entry 1
HOST/serv1.TOM is registered on these accounts:
CN=SERV1,OU=Domain Controllers,DC=TOM
CN=C00049,CN=Computers,DC=TOM
{14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/TOWN-HBWJ29ZOQC is registered on these ac
counts:
CN=Administrator,CN=Users,DC=TOM
CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
{14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/town-hbwj29zoqc.TOM is registered on thes
e accounts:
CN=Administrator,CN=Users,DC=TOM
CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
RestrictedKrbHost/serv1 is registered on these accounts:
CN=C00049,CN=Computers,DC=TOM
CN=SERV1,OU=Domain Controllers,DC=TOM
RestrictedKrbHost/serv1.TOM is registered on these accounts:
CN=C00049,CN=Computers,DC=TOM
CN=SERV1,OU=Domain Controllers,DC=TOM
found 5 groups of duplicate SPNs.
Went to the computers OU and changed computer c00049 to the correct SPN. Now I have a new issues, I'll start a new thread. -
"Your device does NOT have a camera"
What's up with that??? My previous iPhone was just replaced with a refurbished one. It's a 3G and the camera is indeed there but since I had no camera icon on any of my screens so I installed CamZoom. When that app is launched, I get a "Your device does NOT have a camera" message. Have rebooted and restored. Any ideas or do I have to make my third trip to an Apple store? (that's getting very, very old)
The native Camera app cannot be deleted. But, there are two possibilities:
1) It's turned off in Settings > General > Restrictions. If so, enter your passcode and toggle it back ON.
2) You have an Exchange account on the phone. The Exchange server can be set to disable the camera, so if that's the case you'd need to delete the Exchange account or convince your IT department to remove the restriction. -
Since I have Yosemite on my iMac I can't view PDF files in Safari anymore. It keeps telling me to upgrade my Adobe Reader, but it is the latest version. Please help? I don't have this problem on my Macbook that does not have Yosemite installed.
Back up all data before making any changes. Please take each of the following steps until the problem is resolved.
Step 1
If Adobe Reader or Acrobat is installed, and the problem is just that you can't print or save PDF's displayed in Safari, you may be able to do so by moving the cursor to the the bottom edge of the page, somewhere near the middle. A black toolbar should appear under the cursor. Click the printer or disk icon.
Step 2
There should be a setting in its preferences of the Adobe application such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected.
Step 3
If you get a message such as ""Adobe Reader blocked for this website," then from the Safari menu bar, select
Safari ▹ Preferences... ▹ Security
and check the box marked
Allow Plug-ins
Then click
Manage Website Settings...
and make any required changes to the security settings for the Adobe PDF plugin.
Step 4
Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens by pressing command-V, then press return.
From the folder that opens, move to the Trash any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari.
Step 5
The "Silverlight" web plugin distributed by Microsoft can interfere with PDF display in Safari, so you may need to remove it, if it's present. The same goes for a plugin called "iGetter," and perhaps others—I don't have a complete list. Don't remove Silverlight if you use the "Netflix" video-streaming service.
Step 6
Do as in Step 4 with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari. -
You are not allowed to continue because your account does not have the proper privileges
I've been using PS since version 3. I currently run CS2 on Windows XP service pack 2. I've been using CS2 since it was first released. Now, all of a sudden, anytime I install or uninstall a program, whether it is related to Photoshop or not, when I start CS2 I get a window that says "You are not allowed to continue because your account does not have the proper privileges" and the program aborts. The first time this happened and after I had restarted CS2 for the 4th time it started normally. Since then it requires at least one restart (not reboot)after the error and then CS2 starts normally. Anyone have any idea of what is going on here? The first time it happened was right after I had installed a new HP AIO printer and I thought that may have had something to do with it. However, I have installed a couple of other programs and uninstalled another, none of them related in any way to CS2, and I get the error the next time I run CS2. I have found some posts about this but no answers, and most of the posts were related to Vista, not XP. I need help please.
there's a section in adobe.com (not adobeforums.com!) where after you log in (seperate log in from this site) you can go to "my account" and then "my registrations". you can manually add registrations there. that's how i've registered most of my adobe purchases.
ok. just ran through it:
go to http://www.adobe.com/ (make sure you have flash turned on)
click "Your Account" in the upper left corner.
log in with your adobe.com id, create one if you don't have one. this is SEPERATE from the id you log into this forum with!
click on "View Product Registrations"
click on "View Adobe branded products registrations"
if you have any registed packages, they'll be listed. at the bottom of the page click on the button that looks like this: -
This user does not have an Installed repository
Hi alll,
I am establishing the connection with server using JDeveloper 9.0.2.822.I am getting this error
""This user does not have an Installed repository"""
I m new in this JDeveloper. Kindly help how come I can establish
the connection with serverWhich server you try to connect to?
Why are you still using jdev 9.0.2? This version is at least 4 years out of date.
Timo -
"Your computer does not have the hardware to run this software"
When I try to install Final Cut Studio, I receive the error "your computer does not have the hardware to run this software." I just purchased a brand new 13in macbook pro with 4gb of ram about 2 weeks ago. This computer is more then capable of running this software so what's the problem? How do I fix it? I just recently boot camped windows 7 on this thing just in case that matters somehow. Feedback? Comments? appreciate it...
final cut studio 5 I believe
There is no Final Cut Studio 5 (yet). The current version is Final Cut Studio 3, which includes Final Cut Pro 7. Final Cut Pro 5 is NOT compatible with IntelMacs. Version 5.1 was the first version to be compatible with IntelMacs.
-DH -
Performance Update 1.0 "Your computer does not have eligible hardware" ?
i tried to do the apple Performance Update 1.0 update but when i double clicked the pkg file it says "This computer does not need this update." "Your computer does not have eligible hardware." why is it saying this and what should i do? just so you guys know i have a intell macbook pro 15" and ive been have overheating problems that disconnect me from the internet when it overheats and then i have to restart the computer to fix, and also my computer is real slow with alot of hanging beachballs since i upgraded to snow leopard. im hoping this update will solve these problems if i can figure out how to download it.
another thing i should point out is this update did not come up in the software update. i went to the Performance Update 1.0 page myself to download
Message was edited by: johnpalleyYeah but what about the rest of us!
I have two Macbook Pros (Early 2008) with upgraded hard drives that didn't have this clicking (hard drive head parking) issue in Leopard but now do in Snow Leopard. Apple knows this is an issue, makes an update pretty much for every other model but this! I've called Apple Care and no one seams to have heard of this issue even though its all over the internet and they released an update to specifically address this issue!!! Come on Apple, if you going to attempt to address an issue do it for all the computers effected! What my $3000 spent a year and a half ago is no good and what... now you consider my computer obsolete?
*** - I say that since I've contacted Apple about this for the past 2 months, they come out with an update to fix the issue, I'm all excited only to find out my computer doesn't quality & my computer will now continue to pause for 2-4 seconds 100 times a day!!! Apple get it together... Oh and its the same hard drive that is BTO from apple but since I installed it (which your able per Apple) the hard drive doesn't have the custom apple drivers? -
Your account does not have access to the forums system.
Greetings, My name is Jeff, I'm from Netwrix Corporation, which is a Microsoft partner. I have a problem with accessing Microsoft TechNet forum. After signing-in to my account: [email protected], I go to TechNet
forum, and get a message that: "Your account does not have access to the forums system." And also I've noticed that all my posts were deleted from TechNet forums. Can moderators tell me why did that happen? Why didn't I receive any warning
about my account suspension?
I've already submitted 2 tickets to MSDN Site Feedback Inquiry but didn't receive any answer.
I've called Microsoft TechNet at 800-344-2121 and Professional
Support team at 1-800-936-5800. But everybody send me to the MSDN Site Feedback Inquiry from which I didn't get any answer.
Anybody can help me with my problem?Hi,
Is this the profile you're referencing?
http://social.technet.microsoft.com/Profile/netwrix
It doesn't appear to be banned, but you're definitely right about there being no activity listed.
I'd suggest contacting the forums team directly by sending an email to fissues (at) microsoft [dot] com. The admins do monitor this forum, so you'll probably get a response here as well.
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing) -
Hello,
Today i tried accessing transitbux.com with mozilla, but i'm getting this kind of a error as mentioned below:
Unknown Host
Description: Unable to locate the server requested --- the server does not have a DNS entry. Perhaps there is a misspelling in the server name, or the server no longer exists. Double-check the name and try again.
Can anyone help me please, and the same website is accessible with my phone.
Help me please. :(
Regards
-Try http://www.transitbux.com/
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies" -
Your computer does not have sufficient memory to perform this operation in Captivate
I am currently new to Captivate 4 and I keep getting this error message "Your computer does not have sufficient memory to perform this operation. Do the following"
I am trying to publish a large project were I recorded voice discussions over a power point presentation. The project is about 41 slides long and recorded using the video camera option. What can I do to stop getting this error message and publish this project. Help!Hi,
Please check the memory available in your system.
Also please try the following -
- Open your Captivate project which you wish to publish
- Go to menu item Edit > Preferences
- In the Preferences dialog, go to Project > SWF Size and Quality
- Uncheck the checkbox Advanced project compression
Now try publishing the project.
Regards,
Mukul
Maybe you are looking for
-
Iphone 4s does not connect to itunes
Hi My iphone 4s with ios 7.0.4 suddenly is not recognised by itunes (v11.1.4.62) and asks for a restore. Last backup of this devise on this PC was 5 months ago without any problems. itunes runs on Windows XP. What could be the cause of this problem s
-
Datasource for new GL line items
Hi Experts, From referring to previous forums, its been clear that to use FAGLFLEXA for line items, i have to create a generic datasource. Please confirm forllowing : 1) Is it still the case or does SAP suggests to use any other delivered datasource
-
Drop Down Box Choose A Name and Have only the first name show up
I am creating a form for health care. I have a drop down box with names of Physicians... their full names so they can be easily identified. And then subsequent fields that will be populated based off of the choice. However What I need is that after t
-
Hello! I want reinstall the software on my iPhone 5 (7.0.3). But there is an Error 3 on iTunes. How can i solve this problem? Thank you!
-
Problem with Java in Parallels Desktop...what do you think?
Hi folks... 2 days ago,i bought a Macbook pro 13" and i've installed Parallels Desktop for working on(Windows XP service pack3)... i guess the problem is Java.. i use Business Objects XI program....(a tool for reporting....) To works,it's needs java