YOUTUBE NOT WORKING ON NEW MACBOOK PRO

YOUTUBE NOT WORKING ON NEW MACBOOK PRO
Every time I want to see videos from youtube the video player just says "your browser does not currently recognize any of the video formats available".
Please help I have everything possible up to date.
Thanks!

It appears as if only some videos on YouTube will play using HTML5 and without Flash. For example, this video plays just fine for me and I do not have flash installed: http://www.youtube.com/watch?v=fxEWddT44BY
So, unfortunately, you will have to install flash or wait for YouTube to fix their website.
Also, one thing to try: When I had Flash installed and the "ClickToPlugin" Safari extension installed, YouTube would load all the movies in a simple HTML5 format. So no annotations or any other annoying stuff. Might be worth trying. You will have to install flash but, with the "ClickToPlugin" extension, you don't have to use Flash.

Similar Messages

  • LR 5 not working on new Macbook Pro.

    LR 5 not working on new Macbook Pro.  Have tried 2 CC downloads, 5.6 licensed download and 5.5 licensed download, all result in the same thing.  It comes up with basic screen but no panels and gives an error occurred when changing modules.  Nothing I've tried seems to help.  It also has says "get started with lightroom mobile at top left although it says it is Lr 5.6.  Anybody else having problems?  Calls to adobe result in no help and have to wait till Monday for some technical support.  Surely this should run on a NEW laptop with no other software installed!!!

    Install logs were fine.  Application installed but wouldn't run properly.  Finally got Adobe support and it turns out to be a file permissions error.  Had to add both applications and myself as accessors of Lightroom folder under path ~/Library/Adobe/  and set permissions to read & write (was read only for everything but system) and apply to all enclosed folders.   Runs fine now.  Including this here in case anyone else runs across this issue.

  • IMessage not working on new Macbook Pro.

    iMessage not working on new Macbook Pro. Issue began after I downloaded latest version of Mountain Lion.  After every message it says delivered then immediately a red circle with exclamation point says message not delivered.  Any ideas?

    I can also no longer text on my computer or iPad.  Fine on iPhone.  Same as you - I can see everything up until a specific day.  But I didn't do any kind of update where it should have stopped.  And it stopped working on my computer and iPad at the same time.

  • WD External Hard drive not working with new Macbook Pro

    I have recently upgraded to a new Macbook Pro and when connecting a WD 1 TB Passport external hard drive, it doesn't appear on the MBP, but when I connect it to my old Macbook running 10.5.8, it appears normally. Is this a problem with formatting or an issue because it is USB 2.0...
    Any help appreciated as I have a lot of data on the hard drive and would like to be able to use it with my new MBP.

    I'm on Lion, with similar issues with two WD external HD. But what I found fixed the problem was to:
    1. go to the manufacturer's website (in this case Western Digital),
    2. locate my external HD, download the download.
    For instance, I downloaded the WD Drive Utilities for Mac (for My Passport for Mac USB 3.0):
    http://support.wdc.com/product/download.asp?groupid=219&sid=157&lang=en
    Install the downloaded app.
    3. Plug in external (this part, I think is important) directly into your tower or laptop (as opposed to through a USB multi-plug extender). Possibly this is because you access more power?
    [I'm trying to remember in which order everything happened. But I think at this point the external hard drive mounted]
    4. Install the software that is found on the external HD (in my case, it was a brand new device, so that had never been installed).
    5. Run "WD Drive Utilities" and run diagnostics.
    6. Test to see if it holds. Unmount the External HD. Unplug. Replug in and see if it mounts.
    Note: I have not yet tested to see if plugging in the external somewhere other than directly into the tower also works. But I think the main problem is getting it to mount the first time and installing the software. That's what I think.

  • Front Row not working on new MacBook Pro

    Hello all,
    I cannot get Front Row to work on my new MacBook Pro. I've confirmed that my Apple Remote works using iChat's video preview to see the flashing IR transmitter. I've pressed Cmnd+esc also. I've even tried to double-click on the System >> Library >> CoreServices >> Front Row app to no avail. If someone could help me, I would appreciate it. Many thanks in advance.
    2.2 GHz Core2 Duo MacBook Pro   Mac OS X (10.4.10)   4 GB RAM

    Front Row doesn't usually open if you double-click the application in the CoreServices folder, so that's not unusual. The one troubleshooting step I might try, before calling AppleCare Support since your computer is new, would be to use the Accounts System Preferences to create a new user. Log out and log in as the new user. Can the new user open Front Row with command-esc or the remote? If so, then your original user has a preference file problem. If not, then you may need to re-install Front Row and/or Mac OS X. If your Mac is less than 90 days old, I'd call AppleCare Support and get some help from them to do that (also so they're made aware that a new computer required that in case there's an issue at the factory).
    -Doug

  • BURN - Sourceforge - Not Working on New Macbook Pro

    Does anyone have any suggestions for me on getting this to work?
    I just purchased a new Macbook Pro 2012, and using TDK Double Layer 8.5 gb disks DVDs.
    I took an mp4 and used their s-ware.  It converted it to mpg after I selected VIDEO and NTSC, DVD-Video in drop down box. 
    When I hit burn, I get box that selects SUPERDRIVE AND MAX SPEED 4x.  I hit burn.
    1) Get message that says authoring DVD - runs it's course
    2) Then I get a message that says "Not enough space" Try anyway.  The movie is only 40 minutes long and low quality.  8 gig's is more than enough space. (Blank DVD).
    3) I click BURN anyways.
    4) Disk sounds as if something is happening
    5) Message "Burning "Untitled" - Writing Track (with countdown)
    6) Then I get a pop up window that says 'YOU INSERTED A BLANK DVD.  Choose an action from the pop up menu or click ignore.  I click ignore.
    That's it.  I eject the DVD and try to play, but it is still blank.
    Advice? Suggestions?
    Thanks.

    Install logs were fine.  Application installed but wouldn't run properly.  Finally got Adobe support and it turns out to be a file permissions error.  Had to add both applications and myself as accessors of Lightroom folder under path ~/Library/Adobe/  and set permissions to read & write (was read only for everything but system) and apply to all enclosed folders.   Runs fine now.  Including this here in case anyone else runs across this issue.

  • Internet not Working on New Macbook Pro

    I just got a new macbook pro. Whenever I open safari the page wont load and the beach ball of terror comes up and I have to force quit. I have ethernet access and it says it's connected but none of the internet features are working. I tried to connect through wifi and that isn't working either. Help?

    You don't have a virus.  That isn't an issue for Macs.
    There are a whole bunch of reasons why you're not connected to the internet through your router.  We'll need more info about your router and MacBook Pro.  It's impossible to guess as to your issue without more info.

  • Airplay not working on new macbook pro and apple tv2

    i have a new macbook pro and new apple tv device and have used them together easily. However, now I can't find the apple tv icon on the top bar and have searched everywhere for it, turning off and on the home sharing, restarting the apple tv. any other hints, or is it just something basic...I am new to apple products...
    Thanks

    Doing the reset resolved this issue for me as well.  Not sure why it worked over the restart, but I'll take it.
    My issue was that my MBP-R would not connect with AirPlay.  I had the icon in the top bar and everything.  When I would try to connect it, it would hang for about a minute, then just kick back with nothing happening.

  • Toneport UX2 not working with new MacBook Pro 10.6.2 Snow Leopard

    I do some casual recording using a Line 6 Toneport UX2. Previously i was recording on an older Mac Mini. Recently i upgraded to a new Macbook Pro (Snow Leopard 10.6.2)
    The new Macbook is not responding at all when i plug in my toneport, all the software for the toneport is installed.
    I think the problem is that my toneport is not compatible with an intel Mac. Is this right?
    And if it is can i fix this problem with some kind of upgrade for my toneport software(gearbox)?
    And if there is no solution can someone recomend a new audio interface for me to get? Under $200.

    I use a Toneport UX2 with my intel iMac. I never had the problem you are describing while using Gearbox with GB. However your problem sounds very similar to one I have experienced when I loaded up Line 6 Pod Farm. I discovered that when I start Pod Farm and get the message you mentioned, if I quit Pod Farm then immediately start it again, everything communicates just fine and I'm back in business. I would like to see a fix for this glitch, but for now I just start twice and then get to work.
    Give it a try! I am curious to know if you are in the same boat as me.
    As a side note, Recently Line 6 offered Pod Farm for no charge to registered owners of a Line 6 interface such as ours. You may want to check it out. It gives you some more options to play with.

  • Headphones volume controller not working on new macbook pro

    Hello,
    I recently purchased a new macbook pro (15" late 2013) and just noticed that when plugging my headphones (beats solo HD), the volume controller in the headphones doesn't change the volume of the laptop. The headphone controller works fine on my iphone, and on my older macbook pro (2010, running on mavericks too). I checked the Sound settings under System Preferences, and under the Input tab, the new macbook doesn't recognize the headphone microphone either, which my old macbook pro still does. In terms of sound, the headphones work well, and under the Output tab, the Headphones appear, as normal. The sound can also be adjusted using the keyboard keys and the volume adjust on screen, but not with the headphones volume controller, which seems odd to me.
    Is there a way to fix this?
    Thanks for your time!
    Melissa

    Hi,
    I also noticed this... when I use my old earphones (the white Apple ones that come with the iphone) on my new laptop, everything works fine, including the microphone, volume control, skipping songs... etc. But my other headphones are not recognised at all, just as audio output and nothing else.
    My old macbook, however, still fully recognizes both my old earphones and my "troublesome" Beats headphones, even after the latest system update, as does my iphone
    So I still don't know what is happening.
    Just telling you this so that you make 100% sure your earphones are faulty before discarding them!

  • Motion not working with new MacBook Pro

    I've installed the Production Bundle on a new MacBook Pro 2.5 GHz Intel Core 2 Duo. Everything works fine, FCP, DVDSP, Compressor but Motion crashes every time with an error message:
    "The problem may have been caused by the Ozone plug-in"
    Reinstalled software and still have same error msg.
    Any one have similar issue with Motion? Any ideas on how to fix?
    Thanks in advance.
    _john

    It's easier for me to just point you here:
    http://www.applemotion.net/Troubleshooting/Troubleshooting.html
    but it's on my site where I also promote my books and training products so I have to provide this disclaimer:
    "I may receive some form of compensation, financial or otherwise, from my recommendation or link"
    I consolidated all the info I could gather from these forums on this issue because it arises so frequently.

  • Headphone jack not working on new Macbook Pro what is causing this?

    My 17 inch Macbook Pro is less than two weeks old. The headphone jack does not recognize the headphones about half the time. This occurs with several pairs of headphones and yes, they are ther right size. This is really frustrating on a brand new 3500 dollar machine. What is causing this? It almost seems as if the headphones cannot make contact due to the fact that the connection is too far recessed. I don't live near an Apple store so dealing with this is going to be a P.I.T.A. Anyone have any ideas on how I might fix this issue? Thanks!

    Hi, and thanks for your reply. I didn't have a red light emitting from the jack. I had already checked in the sound preferences to make sure the settings were correct. The headphones were not being recognized. This was not working with several differing sets of headphones. I made a phone appt. with Applecare. The laptop PRAM was reset and it works. There is still a bit of a delay when I plug in the headphones before they are recognized and I do feel the port is just a bit "off" as the no headphones plug all the way in. They seem to just sit almost flush but, not quite. However, resetting it resolved the issue to a satifactory level. Applecare said the issue was that not enough power was getting to that function on my laptop. They gave me the case number and I can use it if I have any further problem when I take the laptop in with me to any Apple service center. I was quite satisfied with how this was handled by Apple and if I have anymore issues will follow up.
    I love  this laptop but, even though this is working now I do feel that port is somewhat recessed a bit much.
    I also want to add that this is my first Mac and despite having had this issue I was extremely impressed with the Applecare call that I got to help resolve this. One of the reasons I went with a Mac was the reputation for service Apple has. I was fed up with Sony to the hilt. I was glad I went with this Mac despite the headphone issue because had I still been with Sony, I'd have been give a major run around to deal with this issue. So far, Apple has tried everything possible to help me with this and assured me should I have any further issue they will immediately resolve it or give me a new machine. WAY better than dealing with Sony! I do not regret going with this MAC headphone issue or not!

  • New USB not working in new macbook pro. What do I do?

    I have just bought a brand new 16 GB USB stick for use with my 2 month old macbook pro. My mac is not recognising the presence of USB stick but I have checked and the USB works in the other family laptop which is a Toshiba. I have used other USB's with the mac so I know it is not just as simple as the ports are not working. Help!

    For reasons unknown to me, your MBP does not like that USB device.  I assume you have tried all available USB ports.
    Ciao.

  • HT201240 Password not working on New MacBook Pro

    Hello.  My log in password is not working. I just purchased a Mac book pro and the password I entered during the set up is not working.  Does anyone know how I can log onto the system if this happens? I've never even used the laptop yet.  Thanks for your input in advance. 

    Solution may be found if you search in the "More Like This" section over in the right column. 
    Since your computer is new, you can always call Apple Care.  You have 90 days of phone tech support for free. 

  • Display not working with new Macbook pro

    My son gave me his 1 year old Macbook pro 6 and in connecting it to my Apple cinema display it gets all these horizontal broken red blinking lines across the whole screen. Disconnected and reconnected the new adaptor I bought and it seemed fine till i tried to begin work and the lines retruned.

    Hi there shelley99,
    The behavior of multiple displays had changed in OS X Mavericks. I would recommend reviewing the information in the article below.
    OS X: Using multiple displays in Mavericks
    http://support.apple.com/kb/HT5891
    -Griff W.

Maybe you are looking for

  • Analog vs. optical audio out ... and what cable to I use?

    I've ordered an iPod Hi-Fi, which I intend to use in place of external speakers for my G5. I have two questions: First, do I want to connect using the analog or the optical audio out? Second, if the latter, what kind of cable to I need if the optical

  • NFL Sunday Ticket App does it display on the tv with the Digital A/V Adapter

    Does anyone know if this works?

  • Replaced ipod won't turn on

    I have a question. I got a replacement ipod late feb of 06 cause my old one died. Now a month and half later my new ipod is having a problem. I took my ipod to work saturday and it worked fine. Then when I got off from work I looked in my bag I saw t

  • How to set the profit centers

    Hello experts i want to know about profit centers i have created a profit center also defined the distribution rule for the profit center i want to know how the transaction takes place according to profit center and its distribution rule do i have to

  • Error Message on iTunes Course Manager

    I got in to my course manager once. I creted the shell of the class. I have the most recent firefox. I continue to get an error message when trying to log in to add to my course. What's up with this? How can I get around it? Ron Cordell [email protec