Z Role not visible in the Field Grouping

Hi all
   I have created(copied an Existing to a new) a Z Role in the System !
   And Saved it ! I could see it as an element in the BP View !
   Now I went to do the Field Grouping ! Under Basic Settings of BP, I selected the Filed Groupings --> Configure Field Attributes per BP Role !
   When I tried adding my Z Role as a New Entry, I get the error : "Entry does not exist in TB003" !
    What I am missing out ?
    Any Help !
Thanks
FYI : CRM 5.0
Thank

Hi Jack,
Please look in to SAP Note : 726197
Reward if it helps
Best Regards,
Johnny.

Similar Messages

Transported Roles not Visible for the User Log-in

I have three roles in the development system. These roles show up in the top level navigation for the users in the dev system. All these roles and the underlying BSPs are transported to QA successfully. I could assign them to users without any problems, but when the users log-in they can not see any of these roles at the top level navigation (In fact, they just get a blank screen). "Entry Point" setting and "Sort Priority" is maintained for all the three roles.
As a test, I created a new role with the same BSP links in QA itself and assigned it to the users. This shows up in the top level navigation for the users. I am wondering what's wrong with the transported roles! If someone could help me here that would be great and I will assign points to helpful replies. I have a very basic knowledge in portal.

After applying SP12 in the portal landscape (EP 6.0), the role transports only work in our test environment, but not in production. Even the manual corrections suggested in OSS note 1002832 didn't help. I can preview all the iviews in the roles with my user id (admin id), but as soon as I log-in with the end user id nothing shows up [Not even the top level navigation tabs show up]. The following is the portal authorization methodology I chose.
1. I assign users to the user groups
2. I assign user groups to the roles
I want to emphasize that all is well in our test environment, it is the production environment that shows inconsistency. Let me know if anyone has any pointers.

Roles not visible in the Catalog while requesting roles in OIM 11gr2

Hi Experts,
We have recently installed the OIM 11g r2 for a POC purpose and created few roles. The issue is we are unable to see the roles created while requesting the roles in catalog.
Already run the Catalog Synchronization Job and its scheduled to run in every 15 mins.
Thanks in advance for your help.

Also, which type of Role Category did you chose for the ones you created ? If you chose "OIM Roles" they won't appear in the catalog, any other Category (e.g. "Default") will be shown.
Try creating a new role with the "Default" category to test it; changing an OIM Role to another category won't work, it will still be hidden.

Goods are not visible on the Web Shop main page (RUMP UP)

Hi colleagues.
Help please anybody :)
There was the problem with the goods in Web Shop.
Goods are not visible on the page Web Shop.
Below you can see actions performed by us and Prerequisites:
1. Repository was unachieved from Standard archive - WEC20_MDMCATALOG_CONS
2. Taxonomy, Hierarchy and Lookup table data were transferred from CRM via MDMGX
3. Manually created root node in Product Catalogs table in MDM
4. Put technical code (ID) of created node to Product Catalog module in WCEM configuration - field Catalog ID.
5. Fill another necessary fields in Product Catalog module in WCEM.
6. Manually add test record in MDM and linked to node in Product Catalog table, elements from Main Taxonomy and other required fields.
7. In preview mode of WCEM configuration not possible see any records from MDM (but product catalog elements showed correctly)
More information about settings in MDM, CRM,WCB and configuration steps can see in attachment files
Best regardn,
Andrey

Hi Denis
Leading zeroes it's no my case, because the products (materials) replicated from CRM to MDM.
Replication from CRM to MDM via MDMGX and Initial Load R3AC1 is successfull.
But on the WebChannel web shop page this products are not visible.
I have suggested that the problem in authirizations of technical user, which uses RFC Destinations from SAP NW AS Java (Web Channel) to MDM.
According Security Guide for SAP Web Channel 2.0 (paragr. 8.3.2 see please screenshot), user of WEC_MDM_DEFAULT destination must assign the role WEBCHANNEL_CATALOG_DISPLAY_ROLE.
But this role does not exist in the system (SAP MDM, SAP NW).
Please give me advice about this.

Payload not visible in the XI monitor

In my scenario an xml message was successfully reaching its destination. The XI system was upgraded from support pack 13 to support pack 16. After that the process is still working fine as the XML message is still successfully reaching its destination. The issue we have is that the Payload is not visible in the last two steps of the monitor. We can see the Payload until Technical Routing in the monitor. But Call Adapter and Response steps do not have payload.
(TCode: SXMB_MONI)
when we double click a message we get XML message details and on the left hand side it shows following hierarchy:
XML Message:
Receiver Grouping
 - SOAP Header
 - SOAP Body
 - Payloads
Request Message Mapping
 - SOAP Header
 - SOAP Body
 - Payloads
Technical Routing
 - SOAP Header
 - SOAP Body
 - Payloads
Call Adapter
 - SOAP Header
 - SOAP Body
(( No Payload displayed, but present above!! ))
Response
 - SOAP Header
 - SOAP Body
(( No Payload displayed, but present above!! ))
Any suggestions would be highly appreciated!
Thanks in advance.
Faiq

Hi faiq
This seems to be the normal behaviour starting with SP13 or 14. There was a discussion about this a while ago and I believe it turned out to be works as designed.
This is what was posted as final conclusion in Re: SXMB_MONI does not show payload after upgrade to SP15:
According to SAP (OSS) this is working as designed. Apparently it was an error in the past that the payload was stored in the DB on the ABAP (IE) side when the AE is involved, as it would then be stored twice at DB level. This explains why this is not a problem when e.g. the IDOC adapter is used.
Anyway, the only way to let the system show the payload in SXI_MONITOR is to set the runtime trace level to 3 (full trace) and parameter logging to 1 (trace switched on).
regards,
Peter

Outline Agreement is not visible within the purchase requisition.

When creating purchase requisitions from a work order that reference an existing outline agreement the outline agreement is not linking to the purchase requisition (not visible from PR at all). The service masters are however being successfully referenced and are visible on the PR.
1)The successful linking of the outline agreement appears to stem from the sequence of steps undertaken. If the requisitioner leaves the vendor field blank inititially and continues on to reference the required outline agreement and service master for the desired vendor then the outline agreement will be successfully linked.
2)If however the requisitioner completes the vendor field and continues on to reference an outline agreement then the outline agreement is not visible within the purchase requisition. This is causing delays in the purchasing process as the purchase requisition cannot be processed until referencing the appropriate outline agreement.
Please suggest if I need to make any config change for the second point.
Regards
Vishvesh

Hi Pooja,
Generally the Outline agreemtn will not trigger Purhchase requsitions , it will only trigger the Schedule lines.
So kindly check the same.
Reg
Dsk

Inserting Selection-screen above the Field-groups created.

Hi guys,
 I am having problems on how to display my selection screen before the field-groups declared. How can I insert my selection-screen above those field-groups? Do i need to create a new field group for my selection-screen and how? thanks in advance! the sample code is below this message.
regards,
Mike
I.E.:
FIELD-GROUPS: header, posten.
selection-screen begin of block BOMREP WITH FRAME TITLE TEXT-429.
PARAMETERS: rb_bhder RADIOBUTTON GROUP g1 DEFAULT 'X',
 rb_bflvl RADIOBUTTON GROUP g1,
 rb_dsply RADIOBUTTON GROUP g1,
 rb_ndlpy RADIOBUTTON GROUP g1,
 rb_alvl RADIOBUTTON GROUP g1.
selection-screen end of block BOMREP.

>
Akashdeep Basu wrote:
> Hi,
> I am using LDB : PNP in my report. I want to add a block on the selection screen ABOVE the standard LDB screen.
>
> Plz help....
> Sample code appreciated.....
>
> Thanks,
> Akash
NOT possible. you can only append to the Std selection-screen. One option is to hide it altogether, so the user sees only the custom block...
~Suresh

Hi - I am looking for the Adobe Illustrator 2014 1.2 (or .0.2) bugfix update for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only update visible is Illustrator CC 2014.1 - which is what introduced the bugs.

Hi - I am looking for the Adobe Illustrator 2014 1.2 (or .0.2) bugfix update for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only update visible is Illustrator CC 2014.1 - which is what introduced the bugs.
The only thing that I can think of that might be causing the issues that I have a Mac Mini on Mavericks.
Dave

Hi
I have discovered that my question above is a non-question. A user triggered by looking at the below article about Illustrator 2014 cc 17.0.2
http://helpx.adobe.com/illustrator/release-note/illustrator-17-0-2-release-notes.html
He had recently upgraded from wht we now know is 18.0 to 18.1 which is the latest version. He read the above artic
le and supposed that it was a bug fix release for his version - because the v17 ov18 number is not often displayed. It is usually just 2014 CC.
I have asked him to post a bug report about Adobe Illustrator CC 2014.1
Dave

I updated win7 and now I cant see ff. I have reinstalled it 5 times now. It shows it is running in task manager but it is not visible on the desk top.

I installed win7 ultimate and then ff. ff worked fine until I installed win7 service pack 1 and all the other updates it recommended. I click to open ff and nothing happens. I look in task manager and it shows it is running. It is not visible on the screen or in the task bar. I have reinstalled a fresh download of it 5 times. I even tried the beta version but still the same problem. I can use explorer and chrome ok but not ff.

The "System Tray" is located at the very bottom right of your screen and is a list of most/all running applications that will show in this list.
For your SysFader issue, this "may" be the problem:
1 Find the "My Computer" desktop icon and right-click it. A pull-down menu will appear. Select "Properties."
2 Click on the "Advanced" tab. This will load a new page of options.
3 Select the "Visual Effects" tab at the top of the window and deselect "Animate Windows when minimizing and maximizing," "Fade or slide menus into view," "Fade or slide Tool Tips into view" and "Fade out Menu items after checking."
4 Click "OK." This will remove most if not all of the Sysfader effects, at the same time correcting related errors that used to come up during opening a new file or program.

The value 4010 39 99 is not allowed for the field MARC-STEUC/BAPI_MARC-CTR

Hi all,
BAPI' BAPI_MATERIAL_SAVEDATA' throws error the below error while creating material.
'The value 4010 39 99 is not allowed for the field MARC-STEUC/BAPI_MARC-CTRL_CODE'
Any idea abt this error.
Regards,
Thiyagu

Hi,
As this BAPI is triggered from external sytem that by client in production environment , I would not be able to dig it further.
Thats why I asked if anybody confronted the same error previously.
Thanks for suggestion.

I have deleted some emails a d my phone is not bringing up the next group of recent emails

I have deleted some old emails and my iPhone is not bringing up the next group of most recent emails like it used to. Is there a setting that I may have changed?

Hello reneep44,
Thanks for using Apple Support Communities.
These two articles explain what iCloud backs up and how to manage the storage.
iCloud: iCloud storage and backup overview
http://support.apple.com/kb/PH12519?viewlocale=en_US
Here’s what iCloud backs up:
Purchase history for music, movies, TV shows, apps, and booksYour iCloud backup includes information about the content you have purchased, but not the purchased content itself. When you restore from an iCloud backup, your purchased content is automatically downloaded from the iTunes Store, App Store, or iBooks Store. Some types of content aren’t downloaded automatically in all countries, and previous purchases may be unavailable if they have been refunded or are no longer available in the store. For more information, see the Apple Support article iTunes in the Cloud availability by country. Some types of content aren’t available in all countries. For more information, see the Apple Support article Which types of items can I buy in my country?.
Photos and videos in your Camera Roll
Device settings
App data
Home screen and app organization
iMessage, text (SMS), and MMS messages
Ringtones
Visual Voicemail
Managing your iCloud storage
http://support.apple.com/kb/ht4847
You can also free up storage space by moving or deleting old email messages that you no longer need.
Have a nice day,
Mario

JComboBox - Bottom border is not visible for the first time

JComboBox - Bottom border is not visible for the first time i click on the arrow to drop the list down.
This happens because the list when dropped down goes out of the frame.
If have the increased the size of the Frame then i am able to see it,but i dont want to do this.
I am using jdk1.3.1_02.
Any Help would be great.
Please find the code below.
Thanks,
Sridhar.
//file: Lister.java
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class Lister {
    public static void main(String[] args) {
        JFrame frame = new JFrame("Lister v1.0");
        // create a combo box
        String [] items = { "uno", "due", "tre", "quattro", "cinque",
        "sei", "sette", "otto", "nove", "deici",
        "undici", "dodici" };
        JComboBox comboBox = new JComboBox(items);
        comboBox.setEditable(true);
        // put the controls the content pane
        Container c = frame.getContentPane( );
        JPanel comboPanel = new JPanel( );
        comboPanel.add(comboBox);
        c.add(comboPanel, BorderLayout.NORTH);
        c.setBackground(Color.white);
        comboBox.setBackground(Color.white);
        comboPanel.setBackground(Color.white);
        frame.setBackground(Color.white);
        frame.setResizable(false);
        frame.setSize(200, 200);
        frame.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
        frame.setVisible(true);
}

Hello,
try this:JPanel comboPanel = new JPanel(new BorderLayout());Regards,
Tim

Drop down list(JComboBox) - Bottom border is not visible for the first time

Drop down list(Combo-box) JComboBox - Bottom border is not visible for the first time i click on the arrow to drop the list down.
I am using jdk1.3.1_02.
Did any one face this issue.
Please let me know.
Thanks,
Sridhar.

I must be a little confused regarding your question.
You can simply change your code frame.setSize(200, 200); to frame.setSize(400, 400);When you say you are unable to see the border are you specifically talking about the border of the frame or the border of the combo box?
Lance

The value is not allowed for the field Cross-plant CM

Hello All
When i copy material in refernce to existin gone. I am getting this message
"The value is not allowed for the field Cross-plant CM"
I am not putting any thing in this Basic-view Cross-plant CM, but still getting this message.
Any help will be good...Thanks in advance...

Hi,
Please check the check box in front of the field config material is checked?
If so then this material is configurable material
A material that can have different variants.
For example, a car can have different paint, trim, and engines.
Configurable materials have a super bill of material (BOM) that contains all the components for producing every variant of the material. Similarly, they have a super task list that contains all the operations. When a material is configured, only the components and operations needed for a variant are selected.
Please check
BR
Diwakar

ESS job created not visible in the list of 'Scheduled Process'

As a part of data migration , I am required to invoke an ODI scenario using a java program which in turn is invoked by an ESS job.I'm able to do the same using a standalone application created in my jdeveloper.For incorporating this into the Fusion application I created an ADF Model Project in the hcmEss Application and created a sample javaclass and jobdefinition in the project,similar to what i did in my standalone application.
I have included my job definition in the MarHcmEss and included the MAR file in the EarHcmEss.Also I have given the jazn security for my job,similar to other visible jobs.Still the job that I created is not visible in the list of jobs in the 'Launch ESS Monitoring UI'
All this i tested using a deployment of hcmEss and hcmTalent Applications into my standalone weblogic server.Is there anything that i might have missed during the process?.I am new to ESS.
Thanks,
Ajin

I'm facing the same issue.
Also I'm unable to populate the values from the Resource Bundle in the Localization section of Job Definition.
Any help will be appreciated.
Thanks,
Sangita.

Z Role not visible in the Field Grouping

Similar Messages

Maybe you are looking for