Z - Windows 7 Home Premium 64 bit - new solutions for hotsync?

I am heartsick that my new operating system - Windows home premium 64 bit and my Palm Z22 won't sync.
I'm a little confused by all the computer speak any many of the posts were in 2009. (i.e. is Vista 64 bit, the same as Windows 7 64 it...as it relates to the problem?
What is an IRDA?  (as in -  using an IRDA to USB adapter to Hotsync a Z22 with a laptop running Vista 64.)
Is there a new solution out there? 
Thanks,
mcgeesmail

An Ir adapter is a USB "dongle" - that is, it's a short USB cord with an IR "eye" on the end of it.  You aim your Z22's port at this eye to make the connection (usually about 6" to 12" apart).
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar Messages

  • Will my creative suite 3 program work on windows home premium 64 bit computer? I need to switch computers because my current pc is windows xp

    will my creative suite 3 program work on windows home premium 64 bit computer? I need to switch computers because my current pc is windows xp

    yes, though you may need to use compatibility mode to install.

  • Can I change the OS of Touchsmart 610 from Windows Home Premium to Windows 7 Pro?

    I have 610 1100me system loaded with Windows Home Premium 64 bit.  We bought it from Dubai and is in use in Pakistan.  It started giving problems after few weeks of use.  Its' hard disk makes noise and sometimes, system could not find boot disk.  Most of the times blue screen of death and hanging issues.  Any idea about this issue and how to fix it?  My observation is that the culprit is hard disk!
    Also, can I change its OS to Windows 7 Pro or ultimate (32 or 64 bit)?  Where can I find all drivers for Pro or Ultimate?
    Many thanks for your valueable advice.
    Regards,
    KK
    This question was solved.
    View Solution.

    Hi,
    Nearly nothing change interms of drivers required for Windows 7 (HP, Pro, Ultimate) unless you switch from 64 to 32 bit. You can reuse your current HP 64 bit drivers for 64 bit W7 Pro or Ultimate.
    Regards,
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Need Windows 7 (64 bit) wlan driver for HP R249TU - Product # L2Z88PA

    Urgent need of Windows 7 (64 bit) wlan driver for HP R249TU - Product # L2Z88PA.
    I have tried installing both of the drivers from here (http://support.hp.com/us-en/drivers/selfservice/HP-15-r200-Notebook-PC-series/7486447/model/7748033#...).
    But both of atheros and broadcom are not installing.
    This question was solved.
    View Solution.

    Hi,
    Instals:
    Realtek RTL8723BE  Wi-Fi
    http://ftp.hp.com/pub/softpaq/sp66001-66500/sp66190.exe
    Also you may need:
    Realtek RTL8723BE Bluetooth Driver
    http://ftp.hp.com/pub/softpaq/sp66001-66500/sp66329.exe
    Regards.

  • I recently brought a mac and downloaded windows with the help of boot camp and by mistake i installed windows 7 ultimate version whereas i had the cd and serial key of windows home premium i started installing windows home premium from windows 7 cont...

    I recently brought a mac and downloaded windows with the help of boot camp and by mistake i installed windows 7 ultimate version whereas i had the cd and serial key of windows home premium i started installing windows home premium from windows 7 ULTIMATE then after the exctraction of files and everything the windows setup came and my mouse and keyboard stopped working and i dont know how to open mac os x there is no option anywhere?? what shall i do pls help!!!!if there are any keyboard shortcut key to open mac os x or boot camp pls mention.

    For Boot Camp issues please repost in the Boot Camp forum located by clicking Boot Camp

  • How do I re install windows home premium OA?

    I had windows home premium OA on my computer , but I believe it was accidentally uninstalled from my hard drive.  I have the product key that is on my computer.  I was having trouble finding the correct link to reinstall it on my lap top. 
    When I went to the microsoft Website all I found was support for windows 8 .  Can you give help me with the proper link? thank you

    Please provide the manufacturer and model of your pc.
    It is possible you have a hidden recovery partition on your hard drive which may be used instead of a recovery disk to restore your system (and Windows) to factory defaults.
    Recovery procedures vary from manufacturer to manufacturer.
    You should also search for any recovery disk/s that were supplied with your pc. Manufacturers invariably charge a significant fee to supply replacements.
    If you decide to use borrowed/downloaded media to reinstall Windows on an OEM pc, the process may not be straightforward. Without some experience and patience you may end up with no other option than to pay a professional to finish the job.
    Microsoft does not publicly provide download links for Windows. While you may stumble upon an official download source, beware that many unofficial sources will come pre-loaded with viruses, trojans etc.

  • Synaptics touchpad on HP Mini 110 Windows 7 32 Bit - not working for one user - working for another

    Hi,
    I recently have an issue with Synaptics touchpad on HP Mini 110 Windows 7 32 Bit - NOT working for one user - working for another.
    Windows 7 updates recently installed ???
    By checking the device properties on the user that works - "Synaptics PS/2 Port Touchpad 13/10/2011 Version 15.3.29.0"
    When the other user logs on, the touchpad works for a few seconds, then a displays a black square with a red diagonal line through it, then the touchpad won't respond. Trying to use the keypad to navigate to system diagnosics or anything to find further info is useless....

    Hey eagle_no11,
    Thank you for joining the HP Support Community!
    I will do my best in assisting to hopefully get the TouchPad to work on the second user profile.
    What I would like to start off with, is to restore the original Synaptics drivers onto the profile that is not working correctly. I have included the document Using Recovery Manager to Restore Software and Drivers (Windows 7).
    Once you have installed the original drivers, you will need to complete all updates from both HP, as well as Windows. For these updates, if you open the HP Support Assistant, and select Maintain, you should see an option for updating.
    Please let me know how these steps do work out for you.
    Have a great day!
    I worked on behalf of HP

  • How to create a new solution for portals?

    Hi all,
    In order to makde goinglive sesions for portals, I´ve updated SAP Solution Manager (SSM) to 7.0 EHP1-SP19.
    Portals have two servers:
    - Win 2003 for main application (NETWEAVER 7.0 2004s)
    - HPUX 11.23 for database (Oracle 10.2.0.2.0)
    I haven´t worked with solution manager until this update, and of course, I haven´t configured before.
    I´ve a mix of terms, possible configurations:
    - run SOLMAN_SETUP transaction after update ¿?
    -  install SMD ¿?
    - install/configure SLD (we haven´t configured) ¿?
    - create new solution, system components, logical components,...
    I´ve tried to create a server, database, system, but I don´t know what is the right procedure.
    I´ve seen that there is a transaction called "SOLMAN_SETUP" that I suppose I´ve have to run to configure the new version, but the EWAs configured before de update, runs properly.
    Do you know the steps as more detailed as possbible to create the new solution for portals after update?
    Does any of this steps/procedure impact into our configured and running EWAs and Goinglive sesions?
    Thanks in advance.
    Best Regards
    Chema
    Edited by: tsunix on Mar 29, 2010 9:26 AM

    Hello,
    Are you trying to get the EWA working for Go-Live check or Solution Manager?  Based on my understanding you are trying to get your Solution Manager setup to be able to generate these reports.  However, I will provide notes for both incase I am misunderstanding you. 
    Please review the following notes for getting your system prepared for Go Live checks:
    207223    SAP EarlyWatch Alert processed at SAP
    1095227  FAQ: SAP Hosting - Early Watch Alerts
    207223    SAP EarlyWatch Alert processed at SAP
    Also, you can visit http://service.sap.com/earlywatch for more help/documentation on this.
    If you are trying to setup your EarlyWatch on your Solution Manager system, then please visit the following URL:
    http://service.sap.com/ewa
    You may also want to visit this note to see if it helps.
    1257308   FAQ: Using EarlyWatch Alert
    Thanks,
    Mark

  • Repeatedly asked to install Flash 11 on IE 9 Windows Home Premium 64 bit

    From my admin account - I successfully install the latest version of Adobe Flash Player 11.  Everything works fine (in that same admin account) until a system reboot.  Then I receive messages from websites stating that they want me to install Adobe Flash.  I do so and all is well until the reboot.
    I have followed all the instructions on the Adobe main troubleshooting pages from uninstalling, rebooting, reinstalling, rebooting through the deletion of folders at run %appdat%\Adobe - Flash Folder and %\Macromedia and then uninstalling, rebooting, reinstalling etc. 
    Again, I receive a successful installation message and everything works properly until the reboot.   Looks like a lot of users have had this problem, but I haven't found a clean answer. Thanks in advance for your thoughts.
    I followed one suggestion and downloaded and ran Secunia PSI and found no older version of Flash Player installed.  I do also have Adobe CS 5 Suite installed. I also started receiving messages from HP Solution Software that it would not operate until the latest version of Adobe Flash is installed.  I uninstalled the HP software pending resolution.  Uninstalls and reinstalls of Flash were not successful after removing the HP software either.

    Hello, I too have experienced the repeating of installing Flash Player after performing a successful install. The PC is running Windows 7 Home Premium 64 bit, Internet Explorer 9.0.8112.16421, and Flash Player 11.4.402.265. The installation of the latest FP indicates a successfull install. Then when going to any site that uses FP, for example, weather.com, yahoo news, youtube, a message window indicates the latest FP needs to be installed.
    I've went through the steps in thread 4613512 (FP uninstaller), 928315 (clean install), 987370 (permissions errors), the steps in this thread including deleting the %Appdata%\Macromedia folders prior to the install, removed references to Adobe 7 in the Windows registry (running Adobe 10.1.4). Also checked that Windows Media Player was not installed. It is not. All of the functions in the steps within these threads seemed to complete successfully. No errors or other problems were indicated. Would you have any suggestions on something else to try?  Thank you.

  • Laserjet 4240n driver does not work with windows home premium 64 bit

    I recently was given a HP laserjet 4240n by my employer to use in a remote office.  I am using a Windows version 7 home premium 64 bit laptop.  I have tried the HP install wizard - no support for this printer.  I have tried downloading the "correct" driver - but that doesn't work either.
    I assume that there is something wrong but I have spent hours and still haven't been able to figutre out what is wrong and how to fix it!
    HELP!
    Thanks,
    Steve

    Hello Steve04104,
    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/
    I hope this helps!
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • T500 Windows 7 Home Premium Bit to Bit transition

    I bought a T500 with 4GB of RAM and Windows 7 Home Premium 32Bit Russian
    As I read in When is it possible to switch between 32 bit and 64 bit versions of Microsoft Operating Systems by u..., I "might" have the rights to put in its place 64Bit OS.
     Local support is unfortunately can not say anything useful.
     Supporter told me that at the moment there are no codes for certain Recovery Media. And will it appears or not - unknown.
    Anybody knows will be the new versions of the Recovery Media or not. And if not, whether there is any other opportunity to put the64 Bit version OS with Lenovo key.

    Hi,
    In a peer-to-peer setup, every computer are both client and server. each computer communicates directly with others in the network. It's much more common in the home.
    You need have a router (possibly with wireless capability) and the necessary Ethernet cords to run the router to the modem and from the router to all of your computers.
    Then add them in the same workgroup or HomeGroup.
    Here is a detailed guide, please follow that step by step:
    Peer-To-Peer Network Setup
    http://www.functionx.com/networking/Lesson04.htm
    Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    Karen Hu
    TechNet Community Support

  • Problem on Windows 7 Home Premium cant open program for using codes like visual studio 2012

    I have problem my windows 7 Home Premium because of visual studio 2012..I can't open even in several times, I don't know what happen, and sometime it is so low to process whenksn it to open my laptop..Why is that pleas do reply..ASAP! tha

    Hi,
    According to your description, it seems like VS itself problem, you can try to repair this program through Control Panel for test. If no use, it would be better to post your question at VS forum for further assistance.
    Contact VS forum:
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?category=visualstudio%2Cvsarch%2Cvsdbg%2Cvstest%2Cvstfs%2Cvsdata%2Cvsappdev%2Cvisualbasic%2Cvisualcsharp%2Cvisualc
    Roger Lu
    TechNet Community Support

  • Palm Vx meets Windows 7 64 Bit - I want to HotSync my old Palm Vx's with my new desktop PC. Anybody know whether this will work out?

    I have 2 old but beautiful Palm Vx's that still serve me well. I have a new Windows 7 - 64 bit desktop PC and cannot get them to HotSync. The new desktop has no COM3 port and the serial to USB adapter cable I have doesn't help. Does anyone have any ideas how to help this May/December relationship work out?
    Post relates to: Palm Vx

    UPDATE: My problem seems to have disappeared!  I am mystified.
            Fearing I might lose all important Vx data, I switched to an old XP desktop (32bit) and installed Palm Desktop/USB to RS232 adaptor. After some fiddling with port settings all went well and was relieved to make a backup on the old machine.
            This morning, returned to the new machine (Sony VAIO with Windows 7 Premium (64bit) and ABC Products adaptor (uses Prolific driver) in a more relaxed state of mind. Powered-up tried a hotsync; then started Palm Desktop and all was there and visible.
            I can only suggest that the full 'power-down and restart' overnight must have performed a necessary re-initialisation.
           I now subscribe to those indicating that Palm Desktop 4.1.4 can work with Windows 7 (64bit). Note that Windows 7 Premium does not support XP emulation.
           I hope my report will encourage others who wish to hang on to old Palm PDAs.
    ======================================================================
    I note many others have trodden this path and it still seems that Palm, or latest acquirer, wants to keep out of it!
    My XP laptop just recently died and I now have a Windows 7 replacement with no RS232 port. I have been trying to get linked up via the USB port, using an adaptor, so that I can have a backup for much valuable info on my trusty Palm Vx.
    It is very frustrating; almost works but not the final step. I can see the files have transferred from Vx to Palm Desktop 4.1.4. (using MS Notepad) but when I view using Desktop, it does not "see" them. The Notepad view reveals "padding" characters in the files. I am confident that this cannot be attributed to the USB/RS232 adaptor or related software; I believe it to be the Desktop software.
    Would Desktop 6.2 be a viable approach to try with a Vx? Are there any third-party patches for 4.1.4 to overcome the transfer problem. I am perplexed to see that others seem to have made it work on 64 bits.
    COMMENTS/SOLUTIONS WILL BE MUCH APPRECIATED

  • Windows 7 - 64 Bit Driver Needed For Sound Blaster Live! 5.1 Model SB0100

    I am having trouble finding a working driver for Windows 7 - 64 Bit for a Sound Blaster Li've! 5. Audo Card Model# SB000
    I downloaded driver file SBL_PC64DRVBETA_LB_2_03_0005.exe which I think is a 64 Bit Sound Blaster Li've! update, but Windows 7 does not allow it to be installed because it is not a digitally signed driver. It also seems Creative is no longer supporting these old cards with new driver updates.
    I love the card though. I have bought more recent sound cards and the sound of this card is still much better than the more recent sound cards I have bought. So I would like to keep using it if possible.
    Are there any driver solutions?

    I recently answered about the same question:
    If you?use Vista or Windows7, then there is no official driver. You can only use alternati've drivers like Vista Support Pack by Daniel_K or the one from KXProject (better). But if you have more than 2 gigs of memory installed or an x64 OS, then both drivers will be half-working (as far as I remember, Daniel's driver won't work with more than 2 Gb of memory installed in any OS, and with KX-driver there will only be a problem with MIDI playback with more than 2 Gb AND x64 Win7).

  • Windows 8 (64-bit) Recovery USB for Folio 9470m

    Hi
    I received a new HP Elitebook Folio 9470m with Windows 8 (64-bit) pre-installed recently.
    I have a 13Gb HP_Recovery partition which has 2Gb of free space but I would rather that partition was better utilised for my data and documents.
    Basically, I want to format the HP_Recovery partition so I can use the 13Gb, but before I do that I want to make sure I have an OS install image that I can use if necessary at a later date. 
    I have no HP Recovery Manager software installed and there isn't a version for Windows 8 that I could find\download. I couldn't find one for Windows 7 (64-bit) but I'm not even sure that that version would work?
    I saw a suggestion that pressing F11 at boot will enter the HP Recovery tool but when I tried this nothing happened.
    How can I create a USB Windows 8 (64-bit) install image?
    Thanks in advance
    Steve

    Hello kitkat915,
    Try with the basic driver with the following steps:
    1. Download the next driver to the windows desktop >> ljP1000_P1500-HB-pnp-win64-en.exe [1/1, 3.54M]
       2. Once downloaded in the desktop right click the driver file and select Properties.
         3. Click on Compatibility tab.
            4. Check the box where it says "Run this program in compatibility mode for:"
               5. In the dropdown option select "Windows 7"
          6. And in Privilege Level check the box where it says "Run this program as an administrator"
       7. Now click on Apply and OK buttons to close the Properties window.
    8. Then start the instalation, double click the driver file "ljP1000_P1500-HB-pnp-win64-en"
    It may look like the next screenshot:
    Spoiler (Highlight to read)
    Hope these steps helps you
    * Click on KUDOS star to say thanks       
    * Click on the button Accepted Solution if the question is answered.
    Regards,
    ferRX.

Maybe you are looking for

  • Sales order some line items are showing not relavant

    Hi SD Guys, In sales order some line items are showing not relavant. Why are they showing a status of not complete or "not relevant"? Thanks Sunny

  • Change e-mail body in mail adapter using module.

    Hi All, I am woking with one mail adapter and I prepared one code to change the attachement name and body content. The attachement is working good but the body e-mail is not working. After to check a lot of blog my code now is creating two attachemen

  • Design Mode in FB 4.5.1

    Hey, since 2 months i develop and deploy mobile apps with Flash Builder 4.5.1 for iOS and Android. But in the last weeks i have a problem with the design view that i cant access anymore. Errors occur at loading swc and on each compiling of an MXML (s

  • Why is my text underlined?

    I am not referring to it being formatted that way, it is just appearing that way, as if there is some type of a problem. i was messing around with paragraph and character formatting, trying to understand style sheets, and now i have a headline that j

  • Cannot deploy SJSC jsf projects on weblogic 8.1 SP3

    I rencently downloaded sjsc and now I'm tyring to deploy a sjsc / jsf project to weblogic 8.1 sp3, and keep getting this error: ======================================== Description: An unhandled exception occurred during the execution of the web appl