Z1 bluetooth and network problem after updating to 1.136

Hi,
Last week I updated my phone via PC companion when it notified me a new system update was available. The update took me from Android 4.2.2 to 4.3, and the biuld number is now 14.2.A.1.136.
I use my phone with a SmartWatch 2 all the time, and a SBH20 bluetooth headset in my car. Before the update everything worked fine, but now I have issues with bluetooth connectivity. My SmartWatch 2 randomly disconnects and reconnects to the phone, and so does the headset. In the watch, specifically the Whatsapp notification app by LIS software stopped getting notifications most of the time, although every once in a while it does. The SBH20 also randomly disconnects and sometimes it takes minutes to reconnect by itself. I already unpaired and paired again both devices, even reset the SmartWatch, and the problem persists.
But the most recurrent issue is that the phone repeatedly notifies me to "Sign in to network"... and has problems connecting to the 4G and even to wi-fi networks, meaning that sometimes I don't get any data at all for who knows how long, because it happens randomly.
One thing that seems to me is that every time i lose my bluetooth connections it's because (or at the same time) of whatever happens that triggers the "Sign in to network" notification.
I was really happy of having purchased the whole package of phone, watch and headset, please help me with this.
Leonardo

This is the responses I go from Sony "Customer DON'T Care....." regarding bluetooth issues - 
"We can advise Sony Xperia do not test our products with other manufacturer’s devices and so we can not confirm the two devices are compatible.
As the handset has been updated this does indicate it is running different software which means the Bluetooth will have also been updated. Sadly, as Sony Xperia does not test our products with third party Bluetooth devices we will not have been able to foresee the change with your specific device.
We could only suggest that you contact the manufacturer of the device for any further assistance as there is nothing further we could advise.
We do apologise for any inconvenience this may have caused.
It is not that the software does not work it is the fact that we have updated the bluetooth drivers withing the update you have which no longer makes the bluetooth compatable with your car kit, if you ahve not contacted the car manufacturer already then I would suggest contacting them and seeing if there are any updates needed to the car kit."
Mmmmmm... so it seems that they DO NOT test any O/S upgrades against anything.....
It seems strange that both Samsung(S3 running 4.3)  and HTC M* (running 4.4.2) both work perfectly with my car audio system and the "developers" at Sony cant... either that or they just do not care... The smart money is on the latter... My z1 is THE WORST PHONE THAT I HAVE EVER HAD THE MISFORTUNE OF OWNING....

Similar Messages

  • What cause searching network problem after updating iphone 6 from iOS 8.1.2 TO iOS 8.1.3?

    what cause searching network problem after updating iphone 6 from iOS 8.1.2 TO iOS 8.1.3?

    SSince Apple does not support downgrading the iOS I suggest you start a new question that gives a good title to a specific problem. Then in the body of the thread describe the problem in detail, tell us what steps you have tried so far to correct the problem, what happened, and what error messages you received.

  • Airport and network problems after recent update

    I want to know if someone is aware of what went wrong with the latest OS updates, all my computers forget my local wireless connection and sometimes I'm connected to my co-workers unprotected red. Airport just won't do its job.
    This issue is really frustrating since several applications like Flash for example give you and error when saving a file after reconnecting to your network after a network loss.
    If someone knows how to work this around to stop this annoying behavior please advise, I'm sure I am not the only one experiencing this.
    Regards

    Dear Eyewake,
    I have had the same problem recently, after QuickTime 7.1.1 upgrade. The only way I can now get wireless access is to leave the network unprotected at factory settings. At least one other person posting to this discussion list has this problem in the last week, but no replies.
    Do you know where else we can try to get help?

  • Network problems after update; system reinstall not fixing it.

    Hello, first post here ^^
    Sorry if I write with a bit of engrish. I'm very tired ^^"
    My brother's laptop, a Portuguese Classmate PC (aka "Magalhães", version MG2 -- unfortunately, I can't find the corresponding international version, but have a picture) doesn't has any network at all, be it wired or wireless, with the updates of 3/August/2011 installed. I think the problem is udev.
    I have no problems when using an installation media, at least for wired network.
    Even after reinstalling, I still have no network.
    Wired
    The problem with wired, is that the eth0 interface is gone. Have tried network and NetworkManager, and it's just gone. In the output of ifconfig I only have the loopback interface (and would have wlan0, if I had the firmware for the wireless card installed).
    Wired problem solved! Sorry, I actually searched the Internet for a solution and couldn't find anything useful, and only now noticed there's already a thread here about it. I should have searched this forum, instead of the Internet... sorry!
    Wireless
    Previously, I only had to install the rtl8192se chipset drivers from AUR.
    But now, with the latest updates, the kernel [size=1](or the udev, I don't know which it is)[/size]was constantly giving me errors through tty, regarding to wifi. It could scan for networks, but not connect. I have tried with WPA and no security, result was the same.
    Config files and logs
    /etc/rc.conf
    # /etc/rc.conf - Main Configuration for Arch Linux
    # LOCALIZATION
    # LOCALE: available languages can be listed with the 'locale -a' command
    # DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
    # startup and during the boot process. If set to 'no', the C locale is used.
    # HARDWARECLOCK: set to "", "UTC" or "localtime", any other value will result
    # in the hardware clock being left untouched (useful for virtualization)
    # Note: Using "localtime" is discouraged, using "" makes hwclock fall back
    # to the value in /var/lib/hwclock/adjfile
    # TIMEZONE: timezones are found in /usr/share/zoneinfo
    # Note: if unset, the value in /etc/localtime is used unchanged
    # KEYMAP: keymaps are found in /usr/share/kbd/keymaps
    # CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
    # CONSOLEMAP: found in /usr/share/kbd/consoletrans
    # USECOLOR: use ANSI color sequences in startup messages
    LOCALE="pt_PT.UTF-8"
    DAEMON_LOCALE="no"
    HARDWARECLOCK="localtime"
    TIMEZONE="Europe/Lisbon"
    KEYMAP="pt-latin1 pt-latin9 euro"
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    # HARDWARE
    # MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
    # Replace every !module by an entry as on the following line in a file in
    # /etc/modprobe.d:
    # blacklist module
    # See "man modprobe.conf" for details.
    MODULES=(mii r8169 pcspkr snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-codec snd-hda-intel soundcore)
    # Udev settle timeout (default to 30)
    UDEV_TIMEOUT=30
    # Scan for FakeRAID (dmraid) Volumes at startup
    USEDMRAID="no"
    # Scan for BTRFS volumes at startup
    USEBTRFS="no"
    # Scan for LVM volume groups at startup, required if you use LVM
    USELVM="no"
    # NETWORKING
    # HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
    HOSTNAME="MTomas"
    # Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
    # Wired network setup
    # - interface: name of device (required)
    # - address: IP address (leave blank for DHCP)
    # - netmask: subnet mask (ignored for DHCP) (optional, defaults to 255.255.255.0)
    # - broadcast: broadcast address (ignored for DHCP) (optional)
    # - gateway: default route (ignored for DHCP)
    # Static IP example
    # interface=eth0
    # address=192.168.0.2
    # netmask=255.255.255.0
    # broadcast=192.168.0.255
    # gateway=192.168.0.1
    # DHCP example
    # interface=eth0
    # address=
    # netmask=
    # gateway=
    interface=eth0
    address=
    netmask=
    broadcast=
    gateway=
    # Setting this to "yes" will skip network shutdown.
    # This is required if your root device is on NFS.
    NETWORK_PERSIST="no"
    # Enable these netcfg profiles at boot-up. These are useful if you happen to
    # need more advanced network features than the simple network service
    # supports, such as multiple network configurations (ie, laptop users)
    # - set to 'menu' to present a menu during boot-up (dialog package required)
    # - prefix an entry with a ! to disable it
    # Network profiles are found in /etc/network.d
    # This requires the netcfg package
    #NETWORKS=(main)
    # DAEMONS
    # Daemons to start at boot-up (in this order)
    # - prefix a daemon with a ! to disable it
    # - prefix a daemon with a @ to start it up in the background
    # If something other takes care of your hardware clock (ntpd, dual-boot...)
    # you should disable 'hwclock' here.
    DAEMONS=(syslog-ng dbus network netfs @openntpd crond cups alsa gdm)
    hwdetect --show-net
    NET : ppp_generic slhc rfkill
    dmesg (sorry about the very long output, I don't really know whats' useful or not...)
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 2.6.39-ARCH (thomas@evey) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Sat Jul 9 14:57:41 CEST 2011
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz26 root=/dev/disk/by-uuid/f2bdff34-f924-4065-ad3d-051016d84be2 rootfstype=ext4 ro add_efi_memmap
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
    [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f5c0000 (usable)
    [ 0.000000] BIOS-e820: 000000003f5c0000 - 000000003f5cc000 (ACPI data)
    [ 0.000000] BIOS-e820: 000000003f5cc000 - 000000003f5cf000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000003f5cf000 - 0000000040000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI present.
    [ 0.000000] DMI: Intel Corporation Intel powered classmate PC/Intel powered classmate PC, BIOS BPPNV20L.90A.0008.2010.0909.1822 09/09/2010
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] No AGP bridge found
    [ 0.000000] last_pfn = 0x3f5c0 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-DFFFF uncachable
    [ 0.000000] E0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask 0C0000000 write-back
    [ 0.000000] 1 base 03F600000 mask 0FFE00000 uncachable
    [ 0.000000] 2 base 03F800000 mask 0FF800000 uncachable
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [ffff8800000f7d40] f7d40
    [ 0.000000] initial memory mapped : 0 - 20000000
    [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
    [ 0.000000] init_memory_mapping: 0000000000000000-000000003f5c0000
    [ 0.000000] 0000000000 - 003f400000 page 2M
    [ 0.000000] 003f400000 - 003f5c0000 page 4k
    [ 0.000000] kernel direct mapping tables up to 3f5c0000 @ 3f5bd000-3f5c0000
    [ 0.000000] RAMDISK: 37c12000 - 37e01000
    [ 0.000000] ACPI: RSDP 00000000000f7d10 00024 (v02 PTLTD )
    [ 0.000000] ACPI: XSDT 000000003f5c5013 00074 (v01 JPSCSA _JPSCSA_ 06040000 LTP 00000000)
    [ 0.000000] ACPI: FACP 000000003f5cbc60 000F4 (v03 INTEL 06040000 PTL 00000002)
    [ 0.000000] ACPI: DSDT 000000003f5c61a9 05A43 (v01 INTEL BEARG31A 06040000 MSFT 03000001)
    [ 0.000000] ACPI: FACS 000000003f5cefc0 00040
    [ 0.000000] ACPI: TCPA 000000003f5cbd54 00032 (v01 Phoeni x 06040000 TL 00000000)
    [ 0.000000] ACPI: MCFG 000000003f5cbd86 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
    [ 0.000000] ACPI: HPET 000000003f5cbdc2 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
    [ 0.000000] ACPI: APIC 000000003f5cbdfa 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
    [ 0.000000] ACPI: BOOT 000000003f5cbe62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
    [ 0.000000] ACPI: SLIC 000000003f5cbe8a 00176 (v01 JPSCSA _JPSCSA_ 06040000 LTP 00000000)
    [ 0.000000] ACPI: SSDT 000000003f5c5609 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
    [ 0.000000] ACPI: SSDT 000000003f5c5563 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624)
    [ 0.000000] ACPI: SSDT 000000003f5c5087 004DC (v02 PmRef CpuPm 00003000 INTL 20050624)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at 0000000000000000-000000003f5c0000
    [ 0.000000] NUMA: Using 63 for the hash shift.
    [ 0.000000] Initmem setup node 0 0000000000000000-000000003f5c0000
    [ 0.000000] NODE_DATA [000000003f5b8000 - 000000003f5bcfff]
    [ 0.000000] [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff88003dc00000-ffff88003e9fffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal empty
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[2] active PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009d
    [ 0.000000] 0: 0x00000100 -> 0x0003f5c0
    [ 0.000000] On node 0 totalpages: 259405
    [ 0.000000] DMA zone: 56 pages used for memmap
    [ 0.000000] DMA zone: 5 pages reserved
    [ 0.000000] DMA zone: 3920 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 3493 pages used for memmap
    [ 0.000000] DMA32 zone: 251931 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
    [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
    [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
    [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
    [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
    [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88003f200000 s83136 r8192 d23360 u1048576
    [ 0.000000] pcpu-alloc: s83136 r8192 d23360 u1048576 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 255851
    [ 0.000000] Policy zone: DMA32
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz26 root=/dev/disk/by-uuid/f2bdff34-f924-4065-ad3d-051016d84be2 rootfstype=ext4 ro add_efi_memmap
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 1011404k/1038080k available (4019k kernel code, 460k absent, 26216k reserved, 3335k data, 712k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Preemptable hierarchical RCU implementation.
    [ 0.000000] RCU-based detection of stalled CPUs is disabled.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:2304
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 8388608 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.000000] Detected 1662.531 MHz processor.
    [ 0.003340] Calibrating delay loop (skipped), value calculated using timer frequency.. 3326.60 BogoMIPS (lpj=5541770)
    [ 0.003531] pid_max: default: 32768 minimum: 301
    [ 0.003952] Security Framework initialized
    [ 0.004047] AppArmor: AppArmor disabled by boot time parameter
    [ 0.004419] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.007667] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.008243] Mount-cache hash table entries: 256
    [ 0.009502] Initializing cgroup subsys ns
    [ 0.009600] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
    [ 0.009736] Initializing cgroup subsys cpuacct
    [ 0.009925] Initializing cgroup subsys memory
    [ 0.010064] Initializing cgroup subsys devices
    [ 0.010158] Initializing cgroup subsys freezer
    [ 0.010249] Initializing cgroup subsys net_cls
    [ 0.010340] Initializing cgroup subsys blkio
    [ 0.010565] CPU: Physical Processor ID: 0
    [ 0.010656] CPU: Processor Core ID: 0
    [ 0.010743] mce: CPU supports 5 MCE banks
    [ 0.010839] CPU0: Thermal monitoring handled by SMI
    [ 0.010849] using mwait in idle threads.
    [ 0.012451] ACPI: Core revision 20110316
    [ 0.023363] ftrace: allocating 15966 entries in 63 pages
    [ 0.026783] Setting APIC routing to flat
    [ 0.027287] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.061420] CPU0: Intel(R) Atom(TM) CPU N455 @ 1.66GHz stepping 0a
    [ 0.063329] APIC calibration not consistent with PM-Timer: 359ms instead of 100ms
    [ 0.063329] APIC delta adjusted to PM-Timer: 1039059 (3740601)
    [ 0.063329] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
    [ 0.063329] ... version: 3
    [ 0.063329] ... bit width: 40
    [ 0.063329] ... generic registers: 2
    [ 0.063329] ... value mask: 000000ffffffffff
    [ 0.063329] ... max period: 000000007fffffff
    [ 0.063329] ... fixed-purpose events: 3
    [ 0.063329] ... event mask: 0000000700000003
    [ 0.080180] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.106732] Booting Node 0, Processors #1 Ok.
    [ 0.106880] smpboot cpu 1: start_ip = 98000
    [ 0.006666] CPU0: Thermal monitoring enabled (TM1)
    [ 0.203381] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.210009] Brought up 2 CPUs
    [ 0.210112] Total of 2 processors activated (6652.11 BogoMIPS).
    [ 0.210657] devtmpfs: initialized
    [ 0.217499] PM: Registering ACPI NVS region at 3f5cc000 (12288 bytes)
    [ 0.221762] print_constraints: dummy:
    [ 0.222075] NET: Registered protocol family 16
    [ 0.222464] ACPI: bus type pci registered
    [ 0.222965] PCI: MMCONFIG for domain 0000 [bus 00-10] at [mem 0xe0000000-0xe10fffff] (base 0xe0000000)
    [ 0.223102] PCI: MMCONFIG at [mem 0xe0000000-0xe10fffff] reserved in E820
    [ 0.225887] PCI: Using configuration type 1 for base access
    [ 0.226974] bio: create slab <bio-0> at 0
    [ 0.229126] ACPI: EC: Look up EC in DSDT
    [ 0.237091] ACPI: SSDT 000000003f5c5ed2 00203 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
    [ 0.237853] ACPI: Dynamic OEM Table Load:
    [ 0.238022] ACPI: SSDT (null) 00203 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
    [ 0.238519] ACPI: SSDT 000000003f5c5868 005E5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
    [ 0.239233] ACPI: Dynamic OEM Table Load:
    [ 0.239401] ACPI: SSDT (null) 005E5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
    [ 0.240151] ACPI: SSDT 000000003f5c60d5 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
    [ 0.240891] ACPI: Dynamic OEM Table Load:
    [ 0.241061] ACPI: SSDT (null) 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
    [ 0.241466] ACPI: SSDT 000000003f5c5e4d 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
    [ 0.242187] ACPI: Dynamic OEM Table Load:
    [ 0.242357] ACPI: SSDT (null) 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
    [ 0.243484] ACPI: Interpreter enabled
    [ 0.243588] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.243922] ACPI: Using IOAPIC for interrupt routing
    [ 0.255265] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
    [ 0.263625] ACPI: No dock devices found.
    [ 0.263714] HEST: Table not found.
    [ 0.263800] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.265505] ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20110316/dsfield-143)
    [ 0.265765] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88003d1b1a50), AE_ALREADY_EXISTS (20110316/psparse-536)
    [ 0.266086] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
    [ 0.266668] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
    [ 0.270174] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.270276] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.270400] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
    [ 0.270524] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
    [ 0.270647] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
    [ 0.270772] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
    [ 0.270898] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xf7ffffff]
    [ 0.271021] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xfdff]
    [ 0.271118] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
    [ 0.271263] pci 0000:00:00.0: [8086:a010] type 0 class 0x000600
    [ 0.271320] pci 0000:00:02.0: [8086:a011] type 0 class 0x000300
    [ 0.271335] pci 0000:00:02.0: reg 10: [mem 0xf0200000-0xf027ffff]
    [ 0.271346] pci 0000:00:02.0: reg 14: [io 0x18d0-0x18d7]
    [ 0.271356] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
    [ 0.271366] pci 0000:00:02.0: reg 1c: [mem 0xf0000000-0xf00fffff]
    [ 0.271410] pci 0000:00:02.1: [8086:a012] type 0 class 0x000380
    [ 0.271424] pci 0000:00:02.1: reg 10: [mem 0xf0280000-0xf02fffff]
    [ 0.271531] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
    [ 0.271559] pci 0000:00:1b.0: reg 10: [mem 0xf0500000-0xf0503fff 64bit]
    [ 0.271649] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.271659] pci 0000:00:1b.0: PME# disabled
    [ 0.271694] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
    [ 0.271793] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.271802] pci 0000:00:1c.0: PME# disabled
    [ 0.271842] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
    [ 0.271935] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.271944] pci 0000:00:1c.1: PME# disabled
    [ 0.271983] pci 0000:00:1c.2: [8086:27d4] type 1 class 0x000604
    [ 0.272082] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.272091] pci 0000:00:1c.2: PME# disabled
    [ 0.272136] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
    [ 0.272197] pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f]
    [ 0.272257] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
    [ 0.272338] pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f]
    [ 0.272398] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
    [ 0.272459] pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f]
    [ 0.272511] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
    [ 0.272596] pci 0000:00:1d.3: reg 20: [io 0x1880-0x189f]
    [ 0.272670] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
    [ 0.272701] pci 0000:00:1d.7: reg 10: [mem 0xf0504000-0xf05043ff]
    [ 0.272808] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.272817] pci 0000:00:1d.7: PME# disabled
    [ 0.272848] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
    [ 0.272944] pci 0000:00:1f.0: [8086:27bc] type 0 class 0x000601
    [ 0.273056] pci 0000:00:1f.0: [Firmware Bug]: TigerPoint LPC.BM_STS cleared
    [ 0.273215] pci 0000:00:1f.2: [8086:27c1] type 0 class 0x000106
    [ 0.273244] pci 0000:00:1f.2: reg 10: [io 0x18e8-0x18ef]
    [ 0.273259] pci 0000:00:1f.2: reg 14: [io 0x18dc-0x18df]
    [ 0.273274] pci 0000:00:1f.2: reg 18: [io 0x18e0-0x18e7]
    [ 0.273289] pci 0000:00:1f.2: reg 1c: [io 0x18d8-0x18db]
    [ 0.273304] pci 0000:00:1f.2: reg 20: [io 0x18c0-0x18cf]
    [ 0.273334] pci 0000:00:1f.2: reg 24: [mem 0xf0504400-0xf05047ff]
    [ 0.273383] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.273391] pci 0000:00:1f.2: PME# disabled
    [ 0.273418] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
    [ 0.273494] pci 0000:00:1f.3: reg 20: [io 0x18a0-0x18bf]
    [ 0.273613] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 0.273709] pci 0000:00:1c.0: bridge window [io 0x0000-0x0000] (disabled)
    [ 0.273718] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    [ 0.273730] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.273884] pci 0000:03:00.0: [10ec:8136] type 0 class 0x000200
    [ 0.273955] pci 0000:03:00.0: reg 10: [io 0x2000-0x20ff]
    [ 0.274076] pci 0000:03:00.0: reg 18: [mem 0xf0520000-0xf0520fff 64bit pref]
    [ 0.274148] pci 0000:03:00.0: reg 20: [mem 0xf0510000-0xf051ffff 64bit pref]
    [ 0.274199] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [ 0.274363] pci 0000:03:00.0: supports D1 D2
    [ 0.274368] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.274387] pci 0000:03:00.0: PME# disabled
    [ 0.274568] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
    [ 0.274663] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
    [ 0.274672] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    [ 0.274685] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff 64bit pref]
    [ 0.274782] pci 0000:04:00.0: [10ec:8172] type 0 class 0x000280
    [ 0.274812] pci 0000:04:00.0: reg 10: [io 0x3000-0x30ff]
    [ 0.274832] pci 0000:04:00.0: reg 14: [mem 0xf0100000-0xf0103fff]
    [ 0.274954] pci 0000:04:00.0: supports D1 D2
    [ 0.274960] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.274970] pci 0000:04:00.0: PME# disabled
    [ 0.280025] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
    [ 0.280144] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
    [ 0.280152] pci 0000:00:1c.2: bridge window [mem 0xf0100000-0xf01fffff]
    [ 0.280164] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.280266] pci 0000:00:1e.0: PCI bridge to [bus 11-11] (subtractive decode)
    [ 0.280369] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.280378] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    [ 0.280390] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.280397] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.280404] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.280411] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
    [ 0.280417] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    [ 0.280424] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
    [ 0.280431] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
    [ 0.280438] pci 0000:00:1e.0: bridge window [mem 0x40000000-0xf7ffffff] (subtractive decode)
    [ 0.280445] pci 0000:00:1e.0: bridge window [io 0x0d00-0xfdff] (subtractive decode)
    [ 0.280451] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
    [ 0.280490] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.280660] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
    [ 0.280757] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
    [ 0.280849] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
    [ 0.280941] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
    [ 0.281235] ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20110316/dsfield-143)
    [ 0.281497] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88003d1b1a50), AE_ALREADY_EXISTS (20110316/psparse-536)
    [ 0.281828] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.282049] ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20110316/dsfield-143)
    [ 0.282310] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88003d1b1a50), AE_ALREADY_EXISTS (20110316/psparse-536)
    [ 0.282632] Unable to assume _OSC PCIe control. Disabling ASPM
    [ 0.297275] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    [ 0.297984] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 10 11 12 14 15)
    [ 0.298679] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
    [ 0.299375] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    [ 0.300108] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    [ 0.300923] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    [ 0.301740] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
    [ 0.302444] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    [ 0.303298] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.303339] vgaarb: loaded
    [ 0.303656] PCI: Using ACPI for IRQ routing
    [ 0.303746] PCI: pci_cache_line_size set to 64 bytes
    [ 0.303778] pci 0000:00:1b.0: address space collision: [mem 0xf0500000-0xf0503fff 64bit] conflicts with PCI Bus 0000:03 [mem 0xf0500000-0xf05fffff 64bit pref]
    [ 0.303990] pci 0000:00:1d.7: address space collision: [mem 0xf0504000-0xf05043ff] conflicts with PCI Bus 0000:03 [mem 0xf0500000-0xf05fffff 64bit pref]
    [ 0.304159] pci 0000:00:1f.2: address space collision: [mem 0xf0504400-0xf05047ff] conflicts with PCI Bus 0000:03 [mem 0xf0500000-0xf05fffff 64bit pref]
    [ 0.304389] reserve RAM buffer: 000000000009dc00 - 000000000009ffff
    [ 0.304395] reserve RAM buffer: 000000003f5c0000 - 000000003fffffff
    [ 0.304709] NetLabel: Initializing
    [ 0.304793] NetLabel: domain hash size = 128
    [ 0.304878] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.304991] NetLabel: unlabeled traffic allowed by default
    [ 0.305112] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    [ 0.305216] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 0.305468] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    [ 0.316700] Switching to clocksource hpet
    [ 0.319651] Switched to NOHz mode on CPU #0
    [ 0.319806] Switched to NOHz mode on CPU #1
    [ 0.333572] pnp: PnP ACPI init
    [ 0.333697] ACPI: bus type pnp registered
    [ 0.335270] pnp 00:00: [bus 00-3f]
    [ 0.335277] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.335283] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.335289] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.335295] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [ 0.335301] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [ 0.335307] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [ 0.335312] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [ 0.335318] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [ 0.335324] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [ 0.335329] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [ 0.335335] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [ 0.335341] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [ 0.335346] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [ 0.335352] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [ 0.335358] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [ 0.335363] pnp 00:00: [mem 0x000f0000-0x000fffff window]
    [ 0.335369] pnp 00:00: [mem 0x40000000-0xf7ffffff window]
    [ 0.335375] pnp 00:00: [io 0x0d00-0xfdff window]
    [ 0.335381] pnp 00:00: [mem 0x00000000 window]
    [ 0.335386] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
    [ 0.335514] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.335756] pnp 00:01: [io 0x0010-0x001f]
    [ 0.335763] pnp 00:01: [io 0x0024-0x0025]
    [ 0.335768] pnp 00:01: [io 0x0028-0x0029]
    [ 0.335773] pnp 00:01: [io 0x002c-0x002d]
    [ 0.335778] pnp 00:01: [io 0x0030-0x0031]
    [ 0.335783] pnp 00:01: [io 0x0034-0x0035]
    [ 0.335788] pnp 00:01: [io 0x0038-0x0039]
    [ 0.335793] pnp 00:01: [io 0x003c-0x003d]
    [ 0.335798] pnp 00:01: [io 0x0072-0x0077]
    [ 0.335803] pnp 00:01: [io 0x0080]
    [ 0.335808] pnp 00:01: [io 0x0090-0x009f]
    [ 0.335813] pnp 00:01: [io 0x00a4-0x00a5]
    [ 0.335818] pnp 00:01: [io 0x00a8-0x00a9]
    [ 0.335823] pnp 00:01: [io 0x00ac-0x00ad]
    [ 0.335827] pnp 00:01: [io 0x00b0-0x00b5]
    [ 0.335832] pnp 00:01: [io 0x00b8-0x00b9]
    [ 0.335837] pnp 00:01: [io 0x00bc-0x00bd]
    [ 0.335842] pnp 00:01: [io 0x0800-0x080f]
    [ 0.335848] pnp 00:01: [io 0x1000-0x107f]
    [ 0.335853] pnp 00:01: [io 0x1180-0x11bf]
    [ 0.335858] pnp 00:01: [io 0x002e-0x002f]
    [ 0.335869] pnp 00:01: [io 0x04d0-0x04d1]
    [ 0.335874] pnp 00:01: [io 0xfe00]
    [ 0.335879] pnp 00:01: [io 0x0068-0x0077]
    [ 0.335884] pnp 00:01: [io 0x0200-0x020f]
    [ 0.335889] pnp 00:01: [mem 0xe0000000-0xefffffff]
    [ 0.335895] pnp 00:01: [mem 0xfed14000-0xfed17fff]
    [ 0.335900] pnp 00:01: [mem 0xf8000000-0xfbffffff]
    [ 0.335906] pnp 00:01: [mem 0xfef00000-0xfeffffff]
    [ 0.336082] system 00:01: [io 0x0800-0x080f] has been reserved
    [ 0.336183] system 00:01: [io 0x1000-0x107f] has been reserved
    [ 0.336278] system 00:01: [io 0x1180-0x11bf] has been reserved
    [ 0.336373] system 00:01: [io 0x04d0-0x04d1] has been reserved
    [ 0.336468] system 00:01: [io 0xfe00] has been reserved
    [ 0.336560] system 00:01: [io 0x0200-0x020f] has been reserved
    [ 0.336656] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.336798] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
    [ 0.336897] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 0.336996] system 00:01: [mem 0xfef00000-0xfeffffff] has been reserved
    [ 0.337098] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.337130] pnp 00:02: [io 0x0000-0x000f]
    [ 0.337136] pnp 00:02: [io 0x0081-0x008f]
    [ 0.337141] pnp 00:02: [io 0x00c0-0x00df]
    [ 0.337147] pnp 00:02: [dma 4]
    [ 0.337215] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.337242] pnp 00:03: [io 0x00f0-0x00fe]
    [ 0.337263] pnp 00:03: [irq 13]
    [ 0.337336] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.337431] pnp 00:04: [io 0x0070-0x0071]
    [ 0.337445] pnp 00:04: [irq 8]
    [ 0.337513] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.338017] pnp 00:05: [io 0x03f8-0x03ff]
    [ 0.338032] pnp 00:05: [irq 4]
    [ 0.338239] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.338320] pnp 00:06: [io 0x0061]
    [ 0.338392] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.338454] pnp 00:07: [mem 0xfed40000-0xfed44fff]
    [ 0.338534] pnp 00:07: Plug and Play ACPI device, IDs WEC1000 PNP0c31 (active)
    [ 0.338562] pnp 00:08: [io 0x0060]
    [ 0.338567] pnp 00:08: [io 0x0064]
    [ 0.338581] pnp 00:08: [irq 1]
    [ 0.338653] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.338686] pnp 00:09: [irq 12]
    [ 0.338759] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
    [ 0.339063] pnp 00:0a: [mem 0xff800000-0xffffffff]
    [ 0.339151] pnp 00:0a: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.339574] pnp: PnP ACPI: found 11 devices
    [ 0.339666] ACPI: ACPI bus type pnp unregistered
    [ 0.349216] pci 0000:00:1c.1: BAR 14: assigned [mem 0x40000000-0x400fffff]
    [ 0.349328] pci 0000:00:1b.0: BAR 0: assigned [mem 0x40100000-0x40103fff 64bit]
    [ 0.349464] pci 0000:00:1b.0: BAR 0: set to [mem 0x40100000-0x40103fff 64bit] (PCI address [0x40100000-0x40103fff])
    [ 0.349606] pci 0000:00:1d.7: BAR 0: assigned [mem 0x40104000-0x401043ff]
    [ 0.349710] pci 0000:00:1d.7: BAR 0: set to [mem 0x40104000-0x401043ff] (PCI address [0x40104000-0x401043ff])
    [ 0.349849] pci 0000:00:1f.2: BAR 5: assigned [mem 0x40104400-0x401047ff]
    [ 0.349950] pci 0000:00:1f.2: BAR 5: set to [mem 0x40104400-0x401047ff] (PCI address [0x40104400-0x401047ff])
    [ 0.350115] pci 0000:00:1c.2: BAR 15: assigned [mem 0x40200000-0x403fffff 64bit pref]
    [ 0.350248] pci 0000:00:1c.0: BAR 14: assigned [mem 0x40400000-0x405fffff]
    [ 0.350352] pci 0000:00:1c.0: BAR 15: assigned [mem 0x40600000-0x407fffff 64bit pref]
    [ 0.350483] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff]
    [ 0.350580] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 0.350673] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
    [ 0.350773] pci 0000:00:1c.0: bridge window [mem 0x40400000-0x405fffff]
    [ 0.350874] pci 0000:00:1c.0: bridge window [mem 0x40600000-0x407fffff 64bit pref]
    [ 0.351009] pci 0000:03:00.0: BAR 6: assigned [mem 0xf0540000-0xf055ffff pref]
    [ 0.351133] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
    [ 0.351225] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
    [ 0.351324] pci 0000:00:1c.1: bridge window [mem 0x40000000-0x400fffff]
    [ 0.351425] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff 64bit pref]
    [ 0.351558] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
    [ 0.351649] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
    [ 0.351749] pci 0000:00:1c.2: bridge window [mem 0xf0100000-0xf01fffff]
    [ 0.351850] pci 0000:00:1c.2: bridge window [mem 0x40200000-0x403fffff 64bit pref]
    [ 0.351981] pci 0000:00:1e.0: PCI bridge to [bus 11-11]
    [ 0.352070] pci 0000:00:1e.0: bridge window [io disabled]
    [ 0.352164] pci 0000:00:1e.0: bridge window [mem disabled]
    [ 0.352258] pci 0000:00:1e.0: bridge window [mem pref disabled]
    [ 0.352370] pci 0000:00:1c.0: enabling device (0000 -> 0003)
    [ 0.352482] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.352586] pci 0000:00:1c.0: setting latency timer to 64
    [ 0.352607] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 0.352709] pci 0000:00:1c.1: setting latency timer to 64
    [ 0.352728] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 0.352830] pci 0000:00:1c.2: setting latency timer to 64
    [ 0.352844] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.352853] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.352859] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
    [ 0.352865] pci_bus 0000:00: resource 6 [mem 0x000d0000-0x000d3fff]
    [ 0.352871] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
    [ 0.352877] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
    [ 0.352883] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000e3fff]
    [ 0.352890] pci_bus 0000:00: resource 10 [mem 0x40000000-0xf7ffffff]
    [ 0.352896] pci_bus 0000:00: resource 11 [io 0x0d00-0xfdff]
    [ 0.352902] pci_bus 0000:00: resource 12 [mem 0xfed40000-0xfed44fff]
    [ 0.352908] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
    [ 0.352914] pci_bus 0000:02: resource 1 [mem 0x40400000-0x405fffff]
    [ 0.352921] pci_bus 0000:02: resource 2 [mem 0x40600000-0x407fffff 64bit pref]
    [ 0.352927] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
    [ 0.352933] pci_bus 0000:03: resource 1 [mem 0x40000000-0x400fffff]
    [ 0.352940] pci_bus 0000:03: resource 2 [mem 0xf0500000-0xf05fffff 64bit pref]
    [ 0.352946] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
    [ 0.352952] pci_bus 0000:04: resource 1 [mem 0xf0100000-0xf01fffff]
    [ 0.352959] pci_bus 0000:04: resource 2 [mem 0x40200000-0x403fffff 64bit pref]
    [ 0.352966] pci_bus 0000:11: resource 4 [io 0x0000-0x0cf7]
    [ 0.352972] pci_bus 0000:11: resource 5 [mem 0x000a0000-0x000bffff]
    [ 0.352978] pci_bus 0000:11: resource 6 [mem 0x000d0000-0x000d3fff]
    [ 0.352984] pci_bus 0000:11: resource 7 [mem 0x000d4000-0x000d7fff]
    [ 0.352990] pci_bus 0000:11: resource 8 [mem 0x000d8000-0x000dbfff]
    [ 0.352996] pci_bus 0000:11: resource 9 [mem 0x000e0000-0x000e3fff]
    [ 0.353002] pci_bus 0000:11: resource 10 [mem 0x40000000-0xf7ffffff]
    [ 0.353009] pci_bus 0000:11: resource 11 [io 0x0d00-0xfdff]
    [ 0.353015] pci_bus 0000:11: resource 12 [mem 0xfed40000-0xfed44fff]
    [ 0.353230] NET: Registered protocol family 2
    [ 0.353666] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
    [ 0.354759] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
    [ 0.356562] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.357461] TCP: Hash tables configured (established 131072 bind 65536)
    [ 0.357565] TCP reno registered
    [ 0.357677] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.357790] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.358526] NET: Registered protocol family 1
    [ 0.358655] pci 0000:00:02.0: Boot video device
    [ 0.358843] PCI: CLS 32 bytes, default 64
    [ 0.358970] Unpacking initramfs...
    [ 0.422600] Freeing initrd memory: 1980k freed
    [ 0.424221] Simple Boot Flag at 0x36 set to 0x1
    [ 0.425202] audit: initializing netlink socket (disabled)
    [ 0.425328] type=2000 audit(1312465475.423:1): initialized
    [ 0.426137] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.431274] VFS: Disk quotas dquot_6.5.2
    [ 0.431768] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.432308] msgmni has been set to 1979
    [ 0.433016] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.433243] io scheduler noop registered
    [ 0.433398] io scheduler deadline registered
    [ 0.433626] io scheduler cfq registered (default)
    [ 0.433955] pcieport 0000:00:1c.0: setting latency timer to 64
    [ 0.434029] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
    [ 0.434158] pcieport 0000:00:1c.1: setting latency timer to 64
    [ 0.434222] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
    [ 0.434347] pcieport 0000:00:1c.2: setting latency timer to 64
    [ 0.434410] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
    [ 0.434777] intel_idle: MWAIT substates: 0x20220
    [ 0.434799] intel_idle: v0.4 model 0x1C
    [ 0.434803] intel_idle: lapic_timer_reliable_states 0x2
    [ 0.434847] Marking TSC unstable due to TSC halts in idle states deeper than C2
    [ 0.435010] ERST: Table is not found!
    [ 0.435250] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.456560] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.674724] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.727052] Linux agpgart interface v0.103
    [ 0.727338] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
    [ 0.731303] i8042: Detected active multiplexing controller, rev 1.1
    [ 0.734370] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.734541] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [ 0.734705] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [ 0.734863] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [ 0.735024] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [ 0.735354] mousedev: PS/2 mouse device common for all mice
    [ 0.753576] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
    [ 0.753717] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 0.753983] cpuidle: using governor ladder
    [ 0.754335] cpuidle: using governor menu
    [ 0.754959] TCP cubic registered
    [ 0.755047] NET: Registered protocol family 17
    [ 0.755152] Registering the dns_resolver key type
    [ 0.755524] PM: Hibernation image not present or could not be loaded.
    [ 0.755541] registered taskstats version 1
    [ 0.756395] rtc_cmos 00:04: setting system clock to 2011-08-04 13:44:36 UTC (1312465476)
    [ 0.756612] Initializing network drop monitor service
    [ 0.760092] Freeing unused kernel memory: 712k freed
    [ 0.760552] Write protecting the kernel read-only data: 6144k
    [ 0.761521] Freeing unused kernel memory: 60k freed
    [ 0.768916] Freeing unused kernel memory: 784k freed
    [ 0.773948] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.824947] udevd[74]: starting version 173
    [ 0.877923] SCSI subsystem initialized
    [ 0.935196] libata version 3.00 loaded.
    [ 0.956774] ahci 0000:00:1f.2: version 3.0
    [ 0.956824] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 0.957043] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
    [ 0.957186] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
    [ 0.957352] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
    [ 0.957485] ahci 0000:00:1f.2: setting latency timer to 64
    [ 0.964648] scsi0 : ahci
    [ 0.965831] scsi1 : ahci
    [ 0.966239] scsi2 : ahci
    [ 0.966607] scsi3 : ahci
    [ 0.967366] ata1: SATA max UDMA/133 abar m1024@0x40104400 port 0x40104500 irq 43
    [ 0.967524] ata2: SATA max UDMA/133 abar m1024@0x40104400 port 0x40104580 irq 43
    [ 0.967680] ata3: SATA max UDMA/133 abar m1024@0x40104400 port 0x40104600 irq 43
    [ 0.967831] ata4: SATA max UDMA/133 abar m1024@0x40104400 port 0x40104680 irq 43
    [ 1.286817] ata3: SATA link down (SStatus 0 SControl 300)
    [ 1.286986] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.287140] ata4: SATA link down (SStatus 0 SControl 300)
    [ 1.287285] ata2: SATA link down (SStatus 0 SControl 300)
    [ 1.296743] ata1.00: ATA-8: SAMSUNG HM250HI, 2AC101C4, max UDMA/133
    [ 1.296845] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.306650] ata1.00: configured for UDMA/133
    [ 1.307168] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM250HI 2AC1 PQ: 0 ANSI: 5
    [ 1.361599] usbcore: registered new interface driver usbfs
    [ 1.361788] usbcore: registered new interface driver hub
    [ 1.362029] usbcore: registered new device driver usb
    [ 1.362890] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
    [ 1.363254] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.363390] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.363491] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.371359] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.371567] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [ 1.371722] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [ 1.371734] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [ 1.371971] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    [ 1.393443] ehci_hcd 0000:00:1d.7: using broken periodic workaround
    [ 1.393567] ehci_hcd 0000:00:1d.7: debug port 1
    [ 1.397557] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    [ 1.397596] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x40104000
    [ 1.410069] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 1.410565] hub 1-0:1.0: USB hub found
    [ 1.410687] hub 1-0:1.0: 8 ports detected
    [ 1.418573] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
    [ 1.420139] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.436350] uhci_hcd: USB Universal Host Controller Interface driver
    [ 1.436604] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [ 1.436912] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 1.436925] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 1.437083] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 1.450137] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
    [ 1.450657] hub 2-0:1.0: USB hub found
    [ 1.450776] hub 2-0:1.0: 2 ports detected
    [ 1.451206] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 1.451346] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 1.451358] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 1.451506] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    [ 1.466851] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
    [ 1.467375] hub 3-0:1.0: USB hub found
    [ 1.467491] hub 3-0:1.0: 2 ports detected
    [ 1.467949] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 1.468100] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 1.468111] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 1.468263] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    [ 1.476847] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
    [ 1.477389] hub 4-0:1.0: USB hub found
    [ 1.477506] hub 4-0:1.0: 2 ports detected
    [ 1.477926] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
    [ 1.478068] uhci_hcd 0000:00:1d.3: setting latency timer to 64
    [ 1.478080] uhci_hcd 0000:00:1d.3: UHCI Host Controller
    [ 1.478233] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    [ 1.486815] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
    [ 1.487337] hub 5-0:1.0: USB hub found
    [ 1.487454] hub 5-0:1.0: 2 ports detected
    [ 1.720183] usb 1-4: new high speed USB device number 2 using ehci_hcd
    [ 2.310090] usb 1-7: new high speed USB device number 3 using ehci_hcd
    [ 3.346515] EXT4-fs (sda2): INFO: recovery required on readonly filesystem
    [ 3.346624] EXT4-fs (sda2): write access will be enabled during recovery
    [ 3.481722] EXT4-fs (sda2): orphan cleanup on readonly fs
    [ 3.481844] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 1572970
    [ 3.481970] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 1572968
    [ 3.482041] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 923116
    [ 3.482090] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 1572948
    [ 3.482130] EXT4-fs (sda2): 4 orphan inodes deleted
    [ 3.482225] EXT4-fs (sda2): recovery complete
    [ 4.287281] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
    [ 5.547177] udevd[278]: starting version 173
    [ 5.875278] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 5.875984] ACPI: AC Adapter [AC0] (off-line)
    [ 5.881017] ACPI: acpi_idle yielding to intel_idle
    [ 5.888339] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0D:00/input/input1
    [ 5.939985] ACPI: Lid Switch [LID]
    [ 5.940983] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0C:00/input/input2
    [ 5.941147] ACPI: Power Button [PWRB]
    [ 5.941583] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
    [ 5.941763] ACPI: Sleep Button [SLPB]
    [ 5.942546] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [ 5.942697] ACPI: Power Button [PWRF]
    [ 5.943413] thermal LNXTHERM:00: registered as thermal_zone0
    [ 5.943529] ACPI: Thermal Zone [TZ01] (24 C)
    [ 5.972400] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 5.972588] ACPI: Battery Slot [BAT1] (battery present)
    [ 5.995124] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
    [ 5.995453] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
    [ 5.995846] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
    [ 5.999895] iTCO_vendor_support: vendor-support=0
    [ 6.012373] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
    [ 6.124751] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
    [ 6.125083] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x1060)
    [ 6.125348] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 6.190412] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 6.194157] tpm_tis 00:07: 1.2 TPM (device-id 0xFE, rev-id 70)
    [ 6.215082] Initializing USB Mass Storage driver...
    [ 6.215469] usbcore: registered new interface driver usb-storage
    [ 6.215586] USB Mass Storage support registered.
    [ 6.267697] usb 1-7: USB disconnect, device number 3
    [ 6.269402] Linux media interface: v0.10
    [ 6.271745] scsi4 : usb-storage 1-7:1.0
    [ 6.278594] usbcore: registered new interface driver ums-realtek
    [ 6.324583] usbcore: registered new interface driver uas
    [ 6.361274] Linux video capture interface: v2.00
    [ 6.416800] uvcvideo: Found UVC 1.00 device USB Camera (5986:02a8)
    [ 6.435626] input: USB Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input5
    [ 6.435979] usbcore: registered new interface driver uvcvideo
    [ 6.436094] USB Video Class driver (v1.0.0)
    [ 6.516768] [drm] Initialized drm 1.1.0 20060810
    [ 6.632026] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [ 6.657529] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 6.657663] i915 0000:00:02.0: setting latency timer to 64
    [ 6.729787] i915 0000:00:02.0: irq 44 for MSI/MSI-X
    [ 6.729799] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 6.729904] [drm] Driver supports precise vblank timestamp query.
    [ 6.805456] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 6.805960] [drm] initialized overlay support
    [ 6.965295] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
    [ 7.013599] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
    [ 7.142190] fbcon: inteldrmfb (fb0) is primary device
    [ 7.190534] Console: switching to colour frame buffer device 128x37
    [ 7.197352] fb0: inteldrmfb frame buffer device
    [ 7.197461] drm: registered panic notifier
    [ 7.197660] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20110316/video-1148)
    [ 7.198144] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
    [ 7.198602] ACPI: Video Device [IGD0] (multi-head: yes rom: no post: no)
    [ 7.199927] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 8.736636] EXT4-fs (sda2): re-mounted. Opts: (null)
    [ 8.833668] EXT3-fs: barriers not enabled
    [ 8.856596] kjournald starting. Commit interval 5 seconds
    [ 8.859646] EXT3-fs (sda4): using internal journal
    [ 8.862624] EXT3-fs (sda4): mounted filesystem with ordered data mode
    [ 9.026943] Adding 2096444k swap on /dev/sda6. Priority:-1 extents:1 across:2096444k
    [ 18.281512] NET: Registered protocol family 10
    [ 21.591928] EXT4-fs (sda2): re-mounted. Opts: commit=600
    [ 35.750474] fuse init (API version 7.16)
    [ 201.029607] PPP generic driver version 2.4.2
    [ 3255.955029] EXT4-fs (sda2): re-mounted. Opts: commit=0
    [10041.892469] usb 1-1: new high speed USB device number 4 using ehci_hcd
    [10042.021338] scsi5 : usb-storage 1-1:1.0
    [10043.026686] scsi 5:0:0:0: Direct-Access TOSHIBA MK1234GSX PQ: 0 ANSI: 2
    [10043.031863] sd 5:0:0:0: Attached scsi generic sg1 type 0
    [10043.036190] sd 5:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
    [10043.041825] sd 5:0:0:0: [sdb] Write Protect is off
    [10043.045147] sd 5:0:0:0: [sdb] Mode Sense: 38 00 00 00
    [10043.045157] sd 5:0:0:0: [sdb] Assuming drive cache: write through
    [10043.052676] sd 5:0:0:0: [sdb] Assuming drive cache: write through
    [10043.064806] sdb: sdb1
    [10043.071939] sd 5:0:0:0: [sdb] Assuming drive cache: write through
    [10043.075091] sd 5:0:0:0: [sdb] Attached SCSI disk
    [10089.898154] EXT3-fs (sdb): error: can't find ext3 filesystem on dev sdb.
    [10089.913066] EXT4-fs (sdb): VFS: Can't find ext4 filesystem
    [10089.936439] FAT: invalid media value (0xb9)
    [10089.939320] VFS: Can't find a valid FAT filesystem on dev sdb.
    EDIT: ls -l /etc/modprobe.d
    total 16
    -rw-r--r-- 1 root root 30 Ago 4 04:57 blacklist_net.conf
    -rw-r--r-- 1 root root 182 Ago 4 04:57 blacklist_sound.conf
    -rw-r--r-- 1 root root 55 Jun 25 15:30 modprobe.conf
    -rw-r--r-- 1 root root 196 Abr 8 11:08 usb-load-ehci-first.conf
    Thanks in advance for any help.
    Last edited by JohnTH (2011-08-04 16:31:18)

    The kernel outputs many error messages when I start NetwrokManager, and persists even when I stop it
    Here is part of a dmesg:
    [ 587.134444] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
    [ 587.135365] InitializeAdapter8192SE(): Set MRC settings on as default!!
    [ 587.136337] HW_VAR_MRC: Turn on 1T1R MRC!
    [ 587.553458] pwrdown, 0x6(BIT6)=f1
    [ 589.566485] pwrdown, 0x6(BIT6)=f1
    [ 591.573163] pwrdown, 0x6(BIT6)=f1
    [ 593.579828] pwrdown, 0x6(BIT6)=f1
    [ 595.586517] pwrdown, 0x6(BIT6)=f1
    [ 597.593183] pwrdown, 0x6(BIT6)=f1
    [ 599.599777] pwrdown, 0x6(BIT6)=f1
    [ 601.606490] pwrdown, 0x6(BIT6)=f1
    [ 603.613185] pwrdown, 0x6(BIT6)=f1
    [ 605.619843] pwrdown, 0x6(BIT6)=f1
    [ 607.626506] pwrdown, 0x6(BIT6)=f1
    [ 609.633150] pwrdown, 0x6(BIT6)=f1
    [ 611.639785] pwrdown, 0x6(BIT6)=f1
    [ 613.646491] pwrdown, 0x6(BIT6)=f1
    [ 615.653171] pwrdown, 0x6(BIT6)=f1
    [ 617.659839] pwrdown, 0x6(BIT6)=f1
    [ 619.666513] pwrdown, 0x6(BIT6)=f1
    [ 621.673175] pwrdown, 0x6(BIT6)=f1
    [ 623.679774] pwrdown, 0x6(BIT6)=f1
    [ 625.686507] pwrdown, 0x6(BIT6)=f1
    [ 627.693176] pwrdown, 0x6(BIT6)=f1
    [ 629.699826] pwrdown, 0x6(BIT6)=f1
    [ 631.706480] pwrdown, 0x6(BIT6)=f1
    [ 633.713169] pwrdown, 0x6(BIT6)=f1
    [ 635.719785] pwrdown, 0x6(BIT6)=f1
    [ 637.726499] pwrdown, 0x6(BIT6)=f1
    [ 639.733146] pwrdown, 0x6(BIT6)=f1
    [ 641.739824] pwrdown, 0x6(BIT6)=f1
    [ 643.746489] pwrdown, 0x6(BIT6)=f1
    [ 645.753149] pwrdown, 0x6(BIT6)=f1
    [ 647.010241] pwrdown, 0x6(BIT6)=f1
    [ 647.135295] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
    [ 647.136216] InitializeAdapter8192SE(): Set MRC settings on as default!!
    [ 647.137240] HW_VAR_MRC: Turn on 1T1R MRC!
    [ 647.753447] pwrdown, 0x6(BIT6)=f1
    [ 649.766491] pwrdown, 0x6(BIT6)=f1
    [ 651.773160] pwrdown, 0x6(BIT6)=f1
    [ 653.779830] pwrdown, 0x6(BIT6)=f1
    Can somebody help me?

  • Ipad air sound and battery problem after updating to ios 7.1

    After ios 7.1 update my ipad air passcode sound is muted for first digit. The audio volume is lowered in video player.
    The worst thing is battery is draining faster.
    Dear Apple,,,,your most advanced mobile operating system is getting worse and worse......please fix your bugs.

    check the brightness level on your iPad , try to lower it and see if this solve the problem .

  • Mouse and keyboard problem after updating to Mountain Lion

    Hi!
    This is the strangest problem I got on a Mac for 20 years...
    I work on a Macpro 3,1. I upgraded my 10.7.5 os to 10.8.5 (needed it to use GTX 680 card).
    The upgrade went fine and then... The mouse and the keyboard don't react.
    After resetting the SMC they began to react but the mouse is deadly erratic and the keyboard repeats few time each key (impossible to write), for instance I hit n and got nnnnnn.
    Resetting PRam does not help. Redoing the os update did not help.
    This is really bad cause I can't use my Mac at all right now. I think I'll do a Fresh lion install and move my data back to it before I find something for that Mountain.
    Its a real pain, does someone have an idea?
    Thank you,
    Milosz

    Hi!
    For those interested, I found the solution reading others forums.
    Here it is:
    I had to remove my optional old apple airport card (atheros a/b/g) and everything works fine now.
    Hopefully I don't wifi on that Mac, otherwise I would need to buy another one. Which one? I don't know.
    Too bad Mountain Lion isn't supporting anymore that apple card…
    Have a nice day

  • [SOLVED]mplayer and urxvt problems after update

    Hello to all fellow archers!
    Couple of days back, I updated xorg-server, like most of the people around here, so I asume that issues I`m going to describe, could be related to xorg-server being recently updated.
    First issue is related to mplayer not playing movies in fullscreen format, despite being told to do so. The image size of a video is about 20% of screen resolution size, while the rest of the screen is just black.
    MPlayer 1.0rc2-4.3.2 (C) 2000-2007 MPlayer Team
    CPU: AMD Athlon(tm) Processor (Family: 6, Model: 6, Stepping: 2)
    CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
    Compiled with runtime CPU detection.
    115 audio & 237 video codecs
    mplayer: could not connect to socket
    mplayer: No such file or directory
    Failed to open LIRC support. You will not be able to use your remote control.
    Playing Death.Proof[2007][Unrated.Editon]DvDrip[Eng]-aXXo.avi.
    AVI file format detected.
    [aviheader] Video stream found, -vid 0
    [aviheader] Audio stream found, -aid 1
    VIDEO: [DX50] 664x280 12bpp 23.976 fps 741.7 kbps (90.5 kbyte/s)
    Clip info:
    Software: VirtualDubMod 1.5.10.1 (build 2366/release)
    SUB: Detected subtitle file format: microdvd
    SUB: Read 1877 subtitles.
    SUB: Added subtitle file (1): ./Death.Proof[2007][Unrated.Editon]DvDrip[Eng]-aXXo.srt
    [VO_XV] It seems there is no Xvideo support for your video card available.
    [VO_XV] Run 'xvinfo' to verify its Xv support and read
    [VO_XV] DOCS/HTML/en/video.html#xv!
    [VO_XV] See 'mplayer -vo help' for other (non-xv) video out drivers.
    [VO_XV] Try -vo x11.
    ==========================================================================
    Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
    Selected video codec: [ffodivx] vfm: ffmpeg (FFmpeg MPEG-4)
    ==========================================================================
    ==========================================================================
    Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
    AUDIO: 48000 Hz, 2 ch, s16le, 112.0 kbit/7.29% (ratio: 14000->192000)
    Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
    ==========================================================================
    AO: [oss] 48000Hz 2ch s16le (2 bytes per sample)
    Starting playback...
    VDec: vo config request - 664 x 280 (preferred colorspace: Planar YV12)
    VDec: using Planar YV12 as output csp (no 0)
    Movie-Aspect is 2.37:1 - prescaling to correct movie aspect.
    VO: [x11] 664x280 => 664x280 Planar YV12
    [swscaler @ 0x89d5f50]SwScaler: using unscaled yuv420p -> rgb32 special converter
    A: 67.6 V: 67.6 A-V: -0.001 ct: 0.114 1621/1621 7% 12% 1.0% 0 0
    Exiting... (Quit)
    I tried switching between many different video out drivers, the only one that plays video normaly is x11, but the image size is very small.
    I`m using vesa driver and my video card is
    lspci | grep VGA
    01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV250 If [Radeon 9000] (rev 01)
    xorg.conf http://pastebin.com/f314eaaed
    Xorg.0.log http://pastebin.com/f570dbcf5
    I found a partial solution to mplayer problem in this tread http://bbs.archlinux.org/viewtopic.php?id=60054 where patroclo7 stated, that from this update on, X is using autodetection and doesn`t need xorg.conf anymore.
    Anyways I followed the advice deleted my xorg.conf and rebooted arch without xorg.conf. Everything works, even the video in mplayer is running at normal size, however the default screen resolution is a bit to high.
    I would like to set it to 1024x768 (monitor, philips 107E5) but don`t have a clue how to change screen resolution without xorg.conf being present. I`m using openbox as a standalone wm.
    I still have a backup of my working xorg.conf file, so I can switch between xorg.conf and the other config.
    Just for the record, video files are displayed properly using vlc as media player on both described configurations.
    To sum everything up, how to set screen resolution at 1024x 768 without xorg.conf being present or how to fix mplayer displaying movies in a very small screen/box, despite running in fullscreen mode (using xorg.conf).
    My second problem is regarding urxvt and its borderless. If I set it to true urxvt hangs on start everytime. The terminal is displayed in top left corner of the screen but it`s frozen and can`t be used, while being set to false works like a charm.
    Xdefaults
    #####Urxvt Config#####
    URxvt.termName: rxvt
    URxvt.transparent: true
    URxvt.inheritPixmap: true
    URxvt.imLocale: en_US.utf8
    URxvt.scrollBar: false
    URxvt.saveLines: 5000
    URxvt.urlLauncher: kazehakase
    URxvt.cursorBlink: true
    URxvt.fading: 15%
    URxvt.shading: 50
    !URxvt*background: [80]#ece9e2
    !URxvt.foreground: [80]#3d352a
    urxvt.depth: 24
    urxvt*background: rgba:0000/0000/0000/aaaa
    urxvt*foreground: rgba:ffff/ffff/ffff/aaaa
    URxvt.tintColor: #d9d7d1
    URxvt.borderLess: false
    !URxvt.InternalBorder: .5
    URxvt.externalBorder: .5
    URxvt.borderColor: #acacac
    ######Urxvt Colors######
    *foreground: rgba:0000/0000/0000/dddd
    *background: rgb:10/10/10
    !black
    *color0: rgb:20/20/20
    *color8: rgb:75/77/73
    !red
    *color1: rgb:cc/00/00
    *color9: rgb:ef/29/29
    !green
    *color2: rgb:4e/9a/06
    *color10: rgb:8a/e2/34
    !brown/yellow
    *color3: rgb:c4/a0/00
    *color11: rgb:fc/e9/4f
    !blue
    *color4: rgb:34/65/a4
    *color12: rgb:72/9f/cf
    !magenta
    *color5: rgb:75/50/7b
    *color13: rgb:ad/7f/a8
    !cyan
    *color6: rgb:06/98/9a
    *color14: rgb:34/e2/e2
    !white
    *color7: rgb:d3/d7/cf
    *color15: rgb:ee/ee/ec
    ! #####Xterm Config#####
    XTerm*background: black
    XTerm*foreground: gray
    XTerm*highlightColor: orange
    ######Stjerm Config######
    stjerm.key: f12
    stjerm.opacity: 50
    ######Stjerm colors######
    stjerm.color0: #202020
    stjerm.color1: #cc0000
    stjerm.color2: #4e9a06
    stjerm.color3: #c4a000
    stjerm.color4: #3465a4
    stjerm.color5: #75507b
    stjerm.color6: #06989a
    stjerm.color7: #d3d7cf
    stjerm.color8: #757773
    stjerm.color9: #ef2929
    stjerm.color10: #8ae234
    stjerm.color11: #fc394f
    stjerm.color12: #729fcf
    stjerm.color13: #ad7fa8
    stjerm.color14: #34e2e2
    stjerm.color15: #eeeeec
    ######Mouse Cursor Theme######
    Xcursor.theme:Neutral_Plus_Inv
    Any advice is highly appreciated.
    Regards,
    bandito
    Last edited by bandito (2008-12-05 21:35:11)

    The solution for mplayer using xorg.conf file as follows:
    To get fullscreen video working just add
    zoom = yes
    to /.mplayer/config
    In case if you are using gui for mplayer and get the following error trying to play a video file
    Error opening/initializing the selected video_out (-vo) device
    Open /.mplayer/gui.conf and change vo_driver from "xv" to "x11".
    Urxvt solution is described here http://bbs.archlinux.org/viewtopic.php?pid=457421 but also check this for explanation http://comments.gmane.org/gmane.comp.wi … enbox/3947
    regards
    Bandito
    Last edited by bandito (2008-12-05 21:34:31)

  • My iphone 4s wifi and bluetooth problem after updating ios 8? please help me...

    my iphone 4s wifi and bluetooth problem after updating ios 8? please help me...

    Hey there Abdulrahim0259,
    I would recommend that you use the following 2 article to help troubleshoot the Wi-Fi and bluetooth issues you are seeing, respectively:
    iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
    And:
    iOS: Troubleshooting Bluetooth connections - Apple Support
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • Bluetooth problem after update to lollipop

    Hi,I've recently updated my 6503 to Lollipop.Everything went smoothly and is working fine, except 2 issues - one solved, second NOT. FIRST (solved) - phone after update waked up and logged to 2G network, with no data transmission (despite it was turned ON). What was strange - my operator's network appeared in 'available network list' as separate 3 NETWORKS ( 2g, 3g and LTE) Switching manually to LTE solved it - now phone is switching between technologies automatically, data transmission is working fine. SECOND AND NOT SOLVED: I'm using the hands-free system built in my car ( mitsubishi lancer, 2008 ) . After update, phone failed to establish connection with it, even hands-free system remained as 'associated device'. OK ... I erased hands-free system from phone, as well as phone from car's memory. Paired devices again - starting procedure from car's side. Nothing better. Erased and paired starting from phone side. Nothing better.What I've  observed more: phone after try to establish connection , phone in eye blink looses it. On list of available services of hands-free system (in phone menu ofc) , only 'phone sound' appears, while -as I remember but i'm not sure- before update more (2 or 3) services were detected .   PLEASE HEEELP !  

    Re: Bluetooth problem after update to lollipop As above post, I am also experiencing problems with bluetooth on my Z2:- Phone connection is OK if Bluetooth is turned on the phone for " car is ready". Then I can make and receive calls.
    - Playing music on bluetooth does not work after Lollipop 5.0.2 update on my car head unit. Previously connected and able to stream music on 4.4.4 Kit Kat with no issues, looking on web this is not a new issue with Bluetooth connection issues to devices since Lollipop came out so what the **bleep** is going on? I purposely bought a Sony TV, Car Head Unit and Soundbar to ensure everything worked together now the head unit that I only had fiitted in February does not connect which cost me £249!!! No issues connecting to TV or Soundbar but on HU it tries to connect then disconnects and BT Audio Icon on HU display greys out although phone is connected and icon highlighted as connected. I have cleared cache, unpaired and paired again, reinstalled 5.0.2 again through wifi instead of OTA but still the same. Car device: Sony XAV-602BTAndroid version 5.0.2Version: 23.1.A.0.726

  • Networking problem after a zone is created and installed

    Hi all,
    I've got a networking problem after a zone was created and installed on a Solaris 10 box. The box was configured with two NICs, one (e1000g0) with a public IP address, the other one (e1000g1) with a private IP address and connected to a local switch. All worked fine so far.
    Then I created a local zone with shared networking (e1000g1). The zone has a private IP address which is in the same subnet as e1000g1 on the global zone. After some time, I noticed that I could not access (ssh, ping) the global zone. Then after some time, the global zone became available. The problem happened quite frequently.
    Also I observed that: 1) When the global zone was unavailable from outside, it was available (ssh, ping) from another box within the same subnet (e1000g0); 2) If I shutdown e1000g1, the problem was gone.
    Any idea what caused this problem?
    Many thanks,
    Xiaobo

    It was a route problem.

  • My itunes opens after 2-3 hrs after doubleclicking it to open;it happened once or twice  with itunes 11.x , but its a constant problem after updating itunes to 12.x ....my operating system win7;processor i5 intel haswell and 4gb ram...i hav no issue

    My itunes opens  2-3 hrs after doubleclicking it to open;it happened once or twice  with itunes 11.x , but its a constant problem after updating itunes to the latest 12.0.1....my operating system windows7;processor i5 intel haswell and 4gb ram...i have no issue with opening other big programs....i tried uninstalling completely the itunes and reinstalling it as i thought at first it is not opening (because it takes really long time) and i followed the following support pages
    1)iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    2)iTunes for Windows doesn't open after upgrading in Windows Vista, Windows 7, or Windows 8
    but my problem doesnot get solved even after trying all the methods in the above pages...
    now i realized,it opens after 2-3 hrs and at will...after opening it keeps hanging.finally it doesnot again open immediately after closing...kindly help me out as soon as possible

    My itunes opens  2-3 hrs after doubleclicking it to open;it happened once or twice  with itunes 11.x , but its a constant problem after updating itunes to the latest 12.0.1....my operating system windows7;processor i5 intel haswell and 4gb ram...i have no issue with opening other big programs....i tried uninstalling completely the itunes and reinstalling it as i thought at first it is not opening (because it takes really long time) and i followed the following support pages
    1)iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    2)iTunes for Windows doesn't open after upgrading in Windows Vista, Windows 7, or Windows 8
    but my problem doesnot get solved even after trying all the methods in the above pages...
    now i realized,it opens after 2-3 hrs and at will...after opening it keeps hanging.finally it doesnot again open immediately after closing...kindly help me out as soon as possible

  • Share and save problem after latest update

    hello,
    i have share and save problem after latest update - i have installed ps touch on nexus 5 about 2 months ago and until yesterday everything was good but after latest update i can't save and share images in ps touch ( i do reinstall this app  but problem is still  and app doesn't work properly   ) how  can i downgrade to the old version ? Could you fix this problem quickly ?

    i use app which called "aLogcat"
    --------- beginning of /dev/log/main
    I/dalvikvm(24476): Enabling JNI app bug workarounds for target SDK version 11...
    D/dalvikvm(24476): GC_CONCURRENT freed 174K, 2% free 17054K/17264K, paused 2ms+2ms, total 15ms
    W/InputEventReceiver(24476): Attempted to finish an input event but the input event receiver has already been disposed.
    W/InputEventReceiver(24476): Attempted to finish an input event but the input event receiver has already been disposed.
    W/InputEventReceiver(24476): Attempted to finish an input event but the input event receiver has already been disposed.
    --------- beginning of /dev/log/system
    W/ViewRootImpl(24476): Dropping event due to root view being removed: MotionEvent { action=ACTION_MOVE, id[0]=0, x[0]=38.0, y[0]=-115.0, toolType[0]=TOOL_TYPE_FINGER, buttonState=0, metaState=0, flags=0x0, edgeFlags=0x0, pointerCount=1, historySize=2, eventTime=27743080, downTime=27743066, deviceId=4, source=0x1002 }
    W/ViewRootImpl(24476): Dropping event due to root view being removed: MotionEvent { action=ACTION_UP, id[0]=0, x[0]=38.0, y[0]=-115.0, toolType[0]=TOOL_TYPE_FINGER, buttonState=0, metaState=0, flags=0x0, edgeFlags=0x0, pointerCount=1, historySize=0, eventTime=27743086, downTime=27743066, deviceId=4, source=0x1002 }
    D/dalvikvm(24476): GC_FOR_ALLOC freed 122K, 1% free 17271K/17428K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 10K, 1% free 17434K/17604K, paused 7ms, total 7ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 65K, 2% free 17690K/17928K, paused 8ms, total 8ms
    I/dalvikvm-heap(24476): Grow heap (frag case) to 17.615MB for 328336-byte allocation
    D/dalvikvm(24476): GC_FOR_ALLOC freed 0K, 2% free 18010K/18252K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 18011K/18252K, paused 9ms, total 9ms
    I/dalvikvm-heap(24476): Grow heap (frag case) to 18.073MB for 479536-byte allocation
    D/dalvikvm(24476): GC_FOR_ALLOC freed 0K, 2% free 18479K/18724K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_CONCURRENT freed <1K, 2% free 18481K/18724K, paused 2ms+1ms, total 10ms
    D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 6ms
    I/dalvikvm-heap(24476): Grow heap (frag case) to 18.532MB for 479536-byte allocation
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 18949K/19196K, paused 9ms, total 9ms
    D/dalvikvm(24476): GC_CONCURRENT freed <1K, 2% free 19418K/19668K, paused 1ms+1ms, total 10ms
    D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 7ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 19592K/19844K, paused 8ms, total 8ms
    I/dalvikvm-heap(24476): Grow heap (frag case) to 20.049MB for 933136-byte allocation
    D/dalvikvm(24476): GC_FOR_ALLOC freed 0K, 2% free 20503K/20756K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_CONCURRENT freed <1K, 2% free 21416K/21668K, paused 1ms+1ms, total 12ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 50K, 2% free 22351K/22580K, paused 7ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 5K, 1% free 23900K/24140K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 1% free 25824K/26084K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 3411K, 14% free 24528K/28204K, paused 12ms, total 13ms
    D/dalvikvm(24476): GC_CONCURRENT freed 2814K, 14% free 24256K/28204K, paused 2ms+1ms, total 11ms
    D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 4ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 9266K, 1% free 17270K/17424K, paused 10ms, total 10ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 15K, 1% free 17575K/17748K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 22K, 2% free 17875K/18072K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 1K, 2% free 18195K/18396K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 18517K/18720K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 18838K/19044K, paused 11ms, total 11ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 19159K/19368K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 19480K/19692K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 19974K/20192K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 20616K/20840K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 21431K/21664K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 22714K/22960K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 182K, 2% free 24004K/24432K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 8478K, 33% free 17593K/26228K, paused 14ms, total 14ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 18K, 32% free 17895K/26228K, paused 12ms, total 12ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 18K, 31% free 18198K/26228K, paused 11ms, total 11ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 1K, 30% free 18519K/26228K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 29% free 18840K/26228K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_CONCURRENT freed <1K, 26% free 19482K/26228K, paused 2ms+1ms, total 14ms
    D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 10ms
    D/dalvikvm(24476): GC_CONCURRENT freed <1K, 23% free 20297K/26228K, paused 2ms+1ms, total 15ms
    D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 11ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 19% free 21260K/26228K, paused 10ms, total 10ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 15% free 22543K/26228K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 182K, 9% free 23979K/26228K, paused 21ms, total 22ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 8485K, 33% free 17598K/26132K, paused 13ms, total 14ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 25K, 32% free 17894K/26132K, paused 12ms, total 12ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 12K, 31% free 18204K/26132K, paused 12ms, total 12ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 1K, 30% free 18524K/26132K, paused 12ms, total 12ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 28% free 18845K/26132K, paused 8ms, total 9ms
    D/dalvikvm(24476): GC_CONCURRENT freed <1K, 26% free 19487K/26132K, paused 1ms+0ms, total 9ms
    D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 7ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 23% free 20129K/26132K, paused 9ms, total 9ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 20% free 21091K/26132K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 15% free 22375K/26132K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 9K, 9% free 24011K/26132K, paused 14ms, total 14ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 2147K, 10% free 23855K/26456K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_CONCURRENT freed 8776K, 35% free 17337K/26304K, paused 3ms+2ms, total 20ms
    W/InputEventReceiver(24476): Attempted to finish an input event but the input event receiver has already been disposed.
    W/InputEventReceiver(24476): Attempted to finish an input event but the input event receiver has already been disposed.
    W/ViewRootImpl(24476): Dropping event due to root view being removed: MotionEvent { action=ACTION_UP, id[0]=0, x[0]=564.0, y[0]=-50.0, toolType[0]=TOOL_TYPE_FINGER, buttonState=0, metaState=0, flags=0x0, edgeFlags=0x0, pointerCount=1, historySize=0, eventTime=28190972, downTime=28190972, deviceId=4, source=0x1002 }
    D/dalvikvm(24476): GC_CONCURRENT freed 186K, 31% free 17626K/25476K, paused 2ms+1ms, total 12ms
    D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 4ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 63K, 30% free 17884K/25476K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 3K, 29% free 18201K/25476K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_CONCURRENT freed <1K, 27% free 18696K/25476K, paused 2ms+1ms, total 12ms
    D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 9ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 25% free 19190K/25476K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 23% free 19831K/25476K, paused 9ms, total 9ms
    D/dalvikvm(24476): GC_CONCURRENT freed <1K, 19% free 20794K/25476K, paused 2ms+0ms, total 12ms
    D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 8ms
    D/dalvikvm(24476): GC_CONCURRENT freed <1K, 14% free 22078K/25476K, paused 1ms+2ms, total 14ms
    D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 12ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 7% free 23855K/25476K, paused 10ms, total 10ms
    D/dalvikvm(24476): GC_CONCURRENT freed <1K, 6% free 24176K/25476K, paused 2ms+1ms, total 14ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 6440K, 26% free 19562K/26216K, paused 9ms, total 10ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 93K, 23% free 20207K/26216K, paused 10ms, total 10ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 11K, 21% free 20935K/26216K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 18% free 21673K/26216K, paused 9ms, total 9ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 15% free 22499K/26216K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 10% free 23695K/26216K, paused 9ms, total 9ms

  • Personal hotspot missing and music volume not working and lots of other problem after updated 4s to ios8 ? Apple disappointed this time badly.

    Personal hotspot missing and music volume not working and lots of other problem after updated 4s to ios8 ? Apple disappointed this time badly.

    GO to Setting > Cellar Data > VPN Settings > Add any user and password under Personal Hotspot, then you will see it's activated again as usual

  • My ipod touch 4G got problem after update to iOS 6, it can not access the Apps store ,can not access safari,map, weather and so on, could someone help me to solve the problem, thanks in advance~~~

    My ipod touch 4G got problem after update to iOS 6, it can not access the Apps store ,can not access safari,map, weather and so on, could someone help me to solve the problem, thanks in advance~~~

    Force close the App Store app and reset the iPad. No data will be lost when you reset the device.
    In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
    Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Why is my iphone 5 having network and battery problems after the ios 6.1.2?

    why is my iphone 5 having network and battery problems after the ios 6.1.2?

    I also forgot to mention that when it did have power, it wouldn't let me shut it off to try and conserve the battery life. Right when it powered down it would power right back up.

Maybe you are looking for