Z4 report Foreign trade regulations  - S_ALR_87012405

Hi all,
I was wondering if any of you could give me some hint of why Z4 report Foreign trade regulations  - S_ALR_87012405 does not show any data.
i have posted a FI invoice with SCB indicator from foregin country and get it paid. Even though I maintained the link of GL account with house bank, populate SCB data in house bank, activate the field status for both field status group and posting key, the report does not show any data at all.
What would be the possible missing setting to show the data in  Z4 report Foreign trade regulations  - S_ALR_87012405 report?
Thanks in advance for your advice
Kind regards
taro

The reason of report RFAWVZ40 does not display the results seems to be
explained in note 204372
If the selection option for "Do not report st. cent. bank i" is empty,
the system classifies all state central bank indicators as not
reportable in accordance with common logic with selection options. So
the system does not create a message.
Also check the following information:
'Clearing document type", this parameter is intended for a special
purpose (i.e. for certain document types which should not be regarded
as payment document), however for the "usual" case of reporting the
payments in Z4 this parameter should have the default value 'ZZ'.
Otherwise all document types will be processed in this special logic so
that no item is reported.

Similar Messages

  • Z4 report Foreign trade regulations SCB indicator (central bank key)

    hello all,
    i was wondering what is triggering the Z4 report Foreign trade regulations report?
    Is it the SCB indicator (central bank key)?
    If an invoice is missing that indicator, could it be that the report shows no output?
    You can find the indicator in FB03, go to the line item of the vendor, 'more data' tab.
    Actually the indicator is triggered in MIRO from materials management.
    If the indicator is missing, can it be inserted through another transaction code? I have tried in FB02 but the central bank key indicator isn't changeable...
    Regards,
    Pamela

    Hi Pamela Mungur,
    I came across your thread in SDN regarding Z4 report, I am very greatful if you share your experience on below point:
      1. Is SCB indicator always need to input while posting Invoices (MM or SD) or Can we  input while posting Payment also.
    2. How can we Ensure, user always enter SCB in transaction data, as i cannot make it as mandatory at Field status definition level.
    3. I unable to find the Field to input SCB value while creating invoice through SD module.
    Thanks in advance for your valuable time and effort. Please feel to ask to create new thread if required.
    Thanks...Venkat

  • Foreign Trade Regulation Report Z4 (S_ALR_87012405)

    Hi,
    I have a question regarding Z4 report. Our consultant has created new SCB indicator A for some purpose but now once we execute the report, it shows not only debtor or creditor but also sales account with new created SCB indicator A.  Normally this report should not show us turnover in result.
    Has some one ideas, why report showing turnover in Z4 report with turnover account (800...............)
    Thanks in advance.
    Iftikhar

    The reason of report RFAWVZ40 does not display the results seems to be
    explained in note 204372
    If the selection option for "Do not report st. cent. bank i" is empty,
    the system classifies all state central bank indicators as not
    reportable in accordance with common logic with selection options. So
    the system does not create a message.
    Also check the following information:
    'Clearing document type", this parameter is intended for a special
    purpose (i.e. for certain document types which should not be regarded
    as payment document), however for the "usual" case of reporting the
    payments in Z4 this parameter should have the default value 'ZZ'.
    Otherwise all document types will be processed in this special logic so
    that no item is reported.

  • German foreign trade regulation reports Z5E - RFAWVZ5A

    Hello expert,
    is there someone that could tell me if there is some customizing in order to run correctly the following report.
    S_ALR_87012243
    Thanks

    http://scn.sap.com/thread/1871336
    Regards
    Waza

  • France Foreign Trade Regulations - BDF Documents

    Hi Gurus,
    This question is very specific to French Banque de France legal documents. I search if SAP ECC 5 can provide in a standard way others BDF documents wich are not C80, C82; for example E83G or E90.
    Regards

    Hello,
    I'm also interested in how to produce french declaration E83G from SAP.
    Did you find any solution for this?
    thank you for your reply

  • Z5A German Foreign Trade Report and company currency not Euro

    We recently create a German company with USD as local currency and group currency, Euro being only the third currency.
    There is an issue with the German foreign trade regulation reports (Z5E - RFAWVZ5A) that is a legal report for the authorities and that normally distinguishes postings made in Euro from those done in another currencies.
    As the local currency of the company is the US dollar, all the postings whatever the currency of the posting is are in the samee column 888, there is nothing in the column 899.
    Do you know how it would be possible to get the right result, postings in Euro in the column 888 and other postings in column 899 even if the company currency is not the Euro??
    thanks in advance
    Frédérique

    Hi,
    You have the answer in the following forum thread:
    Re: Changing Currency of one Company
    The best way is in fact to create a new entity and then operate all steps mentioned in this thread.
    Not very complicated, but you should test that on your test environment first, or at least backup all your records, in order to safe-guard the process.
    Hope this will help.
    Kind Regards,
    Patrick

  • Foreign trade! Legal regulation control

    Hello Guys,
    If someone has worked on FT-Legal Regulation,kindly tell me whether it is possible to control regulations on the basis of Sales Organisation rather than Country of origin(which is derived from plant).
    The requirement is in Intercompany Business <b>wherein the delivering plant is the same</b> and the regulation needs to be picked on the basis of sales organisation.
    Ex :
    Sales Org 1000 only blocks for Z2 and does not block for Z3
    Sales Org 2000 only blocks for Z3 and does not block for Z2
    Sales Org 5300  does not block for Z2 or Z3 Legal Regs

    Jean,
    I have done a Foreign trade implementation.
    The core team of the client are FT experts and they would tell you about the legal requirements. Your job is to map them in SAP FT.
    In this process you would gain Knowledge about  Foreign trade regulations of that country. Remember its country specific.
    The ECCN's are provided by the client. Info abt the same is extensivley available on the NET.
    You have to get the list of all the mtrls which fall under the controlled cantegory of the respective commerce ministry and then start the config setting  these mtrls as relevant for FT checks.
    Thanks
    Vishal

  • Add a view to the IMG  for Foreign trade declaration Belgium

    Hi,
    I need to make the customising settings for the new report "Foreign trade declartation for Belgium".
    This is report RFIDITSR00.
    In SAP note 928316 I see which steps I need to carry out.
    However, the node "Belgium" is not shown in the Implementation Guide.
    Can I add it via transaction SIMGH and S_IMG_EXTENSION?
    Can you please advise?
    Thank you.
    Kind regards,
    Linda

    Hi,
    Yes you can.
    But do create it as a new Z IMG structure.  The reason being that when a support pack or an upgrade is done, this will not be overwritten. However, if you do chose to create in an exisiting structural node, you will need to insert it back again after an support pack upgrade, from SPDD/SPAU.
    Cheers.

  • Foreign Trade - Legal Control for scheduling agreements

    We are on version 4.6C and I am setting up the legal control for my company.  It seems to work quite well for sales orders but then when I went in to configure scheduling agreements it errors and tells me you cannot do legal control for document type "E" which are typically scheduling agreements.
    I cannot find any documentation on this.  Does anyone know why legal control does not work for scheduling agreements and/or is this functionality available in the Global Trade Services module??
    Thanks in advance for any and all help!!
    Debbie

    Jean,
    I have done a Foreign trade implementation.
    The core team of the client are FT experts and they would tell you about the legal requirements. Your job is to map them in SAP FT.
    In this process you would gain Knowledge about  Foreign trade regulations of that country. Remember its country specific.
    The ECCN's are provided by the client. Info abt the same is extensivley available on the NET.
    You have to get the list of all the mtrls which fall under the controlled cantegory of the respective commerce ministry and then start the config setting  these mtrls as relevant for FT checks.
    Thanks
    Vishal

  • Foreign trade - legal control.

    Hello,
    Could you please tell me what skills/informations are needed to configure the Legal control? I mean although I understand the function and know how to configure, I have to read the foreign trade law to map the law into the system.
    I think the information in foreign trade law is so huge and it is hard to define export control class number, license type etc in system by myself.
    Do you have any experiences regarding this problem?
    Many Thanks
    Jean

    Jean,
    I have done a Foreign trade implementation.
    The core team of the client are FT experts and they would tell you about the legal requirements. Your job is to map them in SAP FT.
    In this process you would gain Knowledge about  Foreign trade regulations of that country. Remember its country specific.
    The ECCN's are provided by the client. Info abt the same is extensivley available on the NET.
    You have to get the list of all the mtrls which fall under the controlled cantegory of the respective commerce ministry and then start the config setting  these mtrls as relevant for FT checks.
    Thanks
    Vishal

  • Foreign Trade: Balance of payment report for Belgium RFIDITSR00

    Hi,
    I have done customizing settings for the balance of payment report of Belgium (report RFIDITSR00)
    according to OSS note 928316.
    When I want to create a file with file name "ITSR_BE_BOP2006" and extension CSV, I get following message:
    Format tree ITSR_BE_BOP2006_XML does not exist for tree type ITSR
    Message no. DMEE_ABA003
    In table IDITSR_DMEE_V I have defined:
    Reporting cat: S03CCR
    Format tree: ITSR_BE_BOP2006_CSV
    What else do I need to customize to get the file created?
    Thank you for your advice.
    Kind regards,
    Linda

    Hi,
    in the copy control between order and invoice you need to set the 'determine export data' to 'B' so that it will be redetermined in the invoice. After that the relevant foreign trade userexits will work as well.
    Balazs

  • Foreign Trade Declarations Step 5 - AP Invoices aren't reported

    Hi Experts,
    I hope you're all well.  I'm hoping you can help me with an Intrastat issue I have please.
    I have noticed that AP Invoice transactions only appear in Step 6 of the Foreign Trade Declarations report if I populated AP Invoice VAT Code with VAT Code E2 which is defined as Input Tax and the EU box is ticked. 
    If I create an AP Invoice with the VAT code I1 then the transaction doesn't appear on Step 6 of the Foreign Trade Declarations report.  VAT Code I1 is set up as Input Tax but the EU box is not ticked for this VAT code.
    Is this correct SAP behaviour please or am I doing something wrong?
    Many thanks for any information.
    Caroline

    Hi,
    Check the Tolerance days in the payment run defaults. Take the days as zero and run the payment wizard.
    In 2005 version available under following path :
    Banking Module > Payment Wizard > Payment Run Default > Tolerance days.
    In 2007 version :
    Administration > Setup > Banking > Payment Run Defaults.
    Regards,
    Jitin
    SAP Business One Forum Team

  • Foreign Trade Reporting

    Hello
    We have a requirement to create two customs related reports out of SAP
    1. The Foreign Trade Zone report-a report of all items entering and leaving the Foreign Trade Zone over a month
    2. The Pedimento report-a report of all duties owed to the Mexican government based on items entering and leaving Mexico over the course of a week.
    I can see in SAP's Foreign Trade Module the ability to create Intrastat and Extrastat reports for the EU, but neither of the above reports are standard in the module. I also cannot see a way of using the module to create the reports-so that they do not have to be entirely custom built. Does anyone have experience with Foreign Trade that can advise on the creation of customs related reporting? It should be noted that we do not have Global Trade Service.
    Thanks

    You have a couple of possibilities here. If you want your SD DataSources for billings and deliveries to have this data, you can append the fields needed to the extract structure and create a User Exit for those respective DataSources through CMOD to lookup on the EIKP and EIPO tables. The other choice would be to create generic DataSources for each table, or if possible create a view of these two tables and create one generic DataSource from that view.

  • Foreign Trade VX99 functionality

    Hi all,
    I am in desperate need to understand the standard Foreign Trade section in a 4.7 system (main t-code VX99).  Would like to use this to help us comply with ITAR requirements but I am totally unfamilar with this area in SAP.
    Does anyone have any advice how I could learn more about this or where I could go to have someone do a WebEx demo of it's functionality??
    Thank you in advance for any consideration.
    Paul

    Dear Paul,
    The SAP Foreign Trade/Customs component will enable you to successfully expand your international competitive position and prepare yourself for future developments in foreign trade.
    SAP Foreign Trade offers you the following core functions:
    Use of all import and export processes and efficient integration in the logistics chain
    Automatic checking of export licenses on the basis of current regulations
    Simplified reporting with automatic procedures for creating, printing, and submitting messages
    Identification of the products for preference processing
    Efficient handling of business processes using EDI communications
    For further information, see also the R/3 online documentation. Accessibility of foreign trade data from all relevant SAP components
    VX99:
    On the Foreign Trade: Cockpit screen, choose Gen. Processing (Ctrl + Shift + F1).
    On the Foreign Trade: General Foreign Trade Processing screen, choose: Environment -> Maintain User Data (or Shift + F6). From here, you can call up Customizing for Transaction FTUS ("Foreign Trade: Control table: User-dependent settings").
    Choose New entries (F5).
    Choose Default data on the New Entries: Details of Added Entries screen. The system then proposes an object name.
    Set the radio button on the initial screen to Enjoy.
    Choose Save.
    The following activities must be completed by the foreign trade expert each day:
    The foreign trade expert must check whether the goods may be exported to the country or customer in question.
    The foreign trade expert must use the export invoices to determine which foreign trade data is required for customs (for example, customs office, mode of transport, procedure, commodity code (rating of materials), calculation of the statistical value etc.).
    The foreign trade expert may have to check whether the materials listed in the export invoice are preference authorized (create a EUR1 document).
    The foreign trade expert may have to adjust the export invoice for customs, in other words, add the foreign trade data to the existing invoices.
    The foreign trade specialist must print the required export documents. Export declaration, EUR1, T papers etc.
    General Foreign Trade Processing:
    Day-to-day documents are checked here for completeness.
    After calling up transaction vx99, enter the required data on the Foreign Trade: Cockpit screen. Choose General Foreign Trade Processing (transaction en99).
    Potential errors with regard to the "Incompletion log":
    Description of errors: "The statistical value of the document item is zero."
    This error occurs when a price does not exist for this item (PR00). This is the case, for example, with free goods or higher-level items for a batch split. Since the statistical value in the item cannot be zero for the periodic declaration to the authorities, you have to enter this value here. The statistical value is subsequently entered when the periodic declarations are processed (see SAPcolor – Foreign Trade – Periodic Declarations for details).
    To call up general information on the foreign trade functionality, choose Show/suppress information (or Shift + F1).
    On the Foreign Trade: General Foreign Trade Processing screen, go to the Export field on the tab Operative Cockpit.
    Hope this will help.
    Regards,
    Naveen.

  • Foreign trade for free of charge purchase orders

    Hello
    Scenario:
    My company imports tobacco leaf into GB from a different company based in BE, and my company processes the leaf in GB and sends it back to BE. We never own the leaf, and we only charge the BE company a price for the service we provide.
    A purchase order is created for a non valuated material master with 'non-valuated GR' account assignment J and no invoice receipt. Foreign trade data such as commodity code either defaults from material master or is manually entered by PO creator.
    There is no pricing procedure and therefore no GRWR condition value and the statistical value field in the 'declara./values' tab is greyed out. This causes an entry on Intrastat with a zero value, which is incorrect, as we should declare the statistical value of the goods for customs purposes. 
    Aside from adding a value in VEFU and then creating the report using VE33, what ideas do you have for how I could get a statistical value on this PO?
    Thanks

    Hi,
    Can just think of a wild work around...well instead of marking the items as free, put in a value and also put in an equal amount of discount. Which will negate the value of the item.
    I dont knw if that will be acceptable by your client..but it is a work around never the less...
    Take care..
    Osayed.

Maybe you are looking for