Z77 g45 turning on then off then on again

OK so I was on my computer I turned it off when I went to turn it on it just goes on for like 2 seconds then off again I tested by using one ram and it still does it also I switched the psu out and it still does it is it a faulty board

This from the z77a-g45 as you didn't specify which z77g45 mobo you have.
Quote
JBAT1: Clear CMOS Jumper
There is CMOS RAM onboard that is external powered from a battery located on the
mainboard to save system configuration data. With the CMOS RAM, the system can
automatically boot into the operating system (OS) every time it is turned on. If you want
to clear the system configuration, set the jumpers to clear the CMOS RAM.
It is just above pcie_5
From the z77ma-g45:
Quote
Jumpers
JBAT1: Clear CMOS Jumper
There is CMOS RAM onboard that is external powered from a battery located on the
mainboard to save system configuration data. With the CMOS RAM, the system can
automatically boot into the operating system (OS) every time it is turned on. If you want
to clear the system configuration, set the jumpers to clear the CMOS RAM.
This one is dead in between the two pcie slots and next to the battery.
Short the pins while the computer is off and the power cord has been removed.
Quote
Important
You can clear the CMOS RAM by shorting this jumper while the system is off. Afterwards,
open the jumper . Do not clear the CMOS RAM while the system is on because it will
damage the mainboard.
>>Clear CMOS Guide<<
If this doesn't work you will need to switch the ram sticks/ try them in different dimms to see if there is a change.
Since you won't give up and additional information some other things to try:
Remove any vga you have installed and try onboard.
Remove the mobo from the case and build in on a uncoated piece of cardboard or other non-conductive surface to make sure there are no shorts.
Remove any usb devices you have plugged in .
Remove the SSD and see if you can at least get to bios.

Similar Messages

  • When i try to open week cal it loads and then closes after a few seconds...I have checked for updates, turned the phone off then on, closed out of the app and then opened it again...nothing works!  Any suggestions?

    When i try to open week cal it loads and then closes after a few seconds...I have checked for updates, turned the phone off then on, closed out of the app and then opened it again...nothing works!  I have thought about deleting the app from my phone and then reloading it again but I worry that it will delete all my calendar info???  Any suggestions?

    To reset, press and hold the Home and power buttons until the silver apple appears.
    I would delete the app, reset the phone and then download the app again. Your calendar information should be stored on the phone as Week Cal uses the Calendar app information.
    Best of luck.

  • When ever i turn cellular data off then back on my mobile internet doesent work why does this happen?, when ever i turn cellular data off then back on my mobile internet doesent work why does this happen?

    when ever i turn cellular data off then back on my mobile internet doesent work why does this happen?, when ever i turn cellular data off then back on my mobile internet doesent work why does this happen?

    You only asked the question 4 times.  You have to repeat it at least 10 times to get an answer here, and then only if you supply useful info about your phone.

  • HT1725 I'm updating my OS and I paused it for a while then turned my PC off then when I opened it again the download was gone. How can I retrieve it?

    I'm updating my OS and I paused it for a while then turned my PC off then when I opened it again the download was gone. How can I retrieve it?

    "I'm updating my OS"
    Which OS?
    "and I paused it for a while then turned my PC off"
    Why?
    Just let it complete the download.
    "then when I opened it again the download was gone. How can I retrieve it?"
    If you mean iOS, select the iOS device in iTunes then click Update.

  • HT3939 My iphone 4S has mute activated. It will not un-mute by taping the mute button or when I turn the phone off then back on.

    Unmute not working model 4S
    My iphone 4S has mute activated. It will not un-mute by taping the mute button or when I turn the phone off then back on.

    Hi Lukeohiggins,
    If you are having issues with your iPhone unexpectely powering off, you may want to try the troubleshooting listed under Power/Battery > Will not turn on, will not turn on unless connected to power, or unexpected power off in the following article:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Cheers,
    - Brenden

  • When watching a program or film, the video will go black, but the audio will keep playimg. The only way to get picture back is to turn the tv off then on.

    When watching a program or film, the video will suddenly fo black, but the audio will keep playing. The only way to get picture back is to turn the tv off then on. Whats going on?

    Welcome to the Apple Community.
    Check that the HDMI cable is correctly seated at both ends.
    Try disconnecting the cable and connecting it again.
    Try another HDMI cable.
    Make sure your TV supports 720p (Apple TV 2)
    Try the Apple TV with another TV

  • Today, my iPad2 wouldn't delete mail.  Then the screen turned black.  I turned the iPad2 off then on.  Got black screen.  Tried backing up to iTunes.  Got the message "iTunes cannot connect to this iPhone because unknown error occurred (OxE8000065).  Help

    Today, my iPad2 wouldn't delete mail.  Then the screen turned black.  I turned the iPad2 off then on.  Got black screen.  Tried backing up to iTunes.  Got the message "iTunes cannot connect to this iPhone because unknown error occurred (OxE8000065).  Help, please.

    Did you try restarting it by holding down the hold and lock button at the same time until you get the apple logo?  If you already tried that then you should try putting it in DFU mode and doing a restore by following these instructions- http://www.iclarified.com/entry/index.php?enid=1034

  • Why does the apple icon come on then off then a white screen appears?

    Why does the apple icon come on then off then a white screen appears? 

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • While using my Iphone 5, all of a sudden  black and white stripes where on the screen. I have tryed to turn the phone off and on again, but there are only the stripes. I can't use it, and nothing happens when I push the buttons. Can someone help me?

    While using my Iphone 5, all of a sudden  black and white stripes where on the screen. I have tryed to turn the phone off and on again, but there are only the stripes. I can't use it, and nothing happens when I push the buttons. Can someone help me?

    Try resetting your phone, hold the home and sleep/wake button down until the apple symbol comes up, then release. If that doesnt work, you may have damaged your phone and need to take it to an apple genius bar.

  • HT4095 I have tried to download 2 movies onto my iPad but I keep getting a download error message. What do I do now? I have already tried turning the iPad off and on again-still nothing.

    I have tried to download 2 movies onto my iPad but I keep getting a download error message. What do I do now? I have already tried turning the iPad off and on again…still nothing.

    Try closing iTunes and reset your iPad. After the iPad starts up, try the download again.
    To close an app, drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the iTunes app then swipe "up" on the app preview thumbnail to close it.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • My Internet keeps freezing, once turn the ipad2 off and on again it okay for a while. Any ideas?

    My Internet keeps freezing, once turn the ipad2 off and on again it okay for a while. Any ideas?

    If you are using Safari then try clearing its cache : Settings > Safari > Clear Cache (and Clear History)
    If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Error message "there is a problem with the printer turn the printer off than on again"

    I have a new HP 7525 HP photosmart printer, went to use it to find all lights flashing with an error message on screen   " There is a problem with the printer. turn the printer off than on again" this does not resolve the problem.. unable to clear this error message!  Unable to use this printer!!!!
    This question was solved.
    View Solution.

    Hi sandrafranks,
    Thank you for your reply! 
    I believe this is a hardware related issue. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
    Hope this helps, and have a great day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Is it normal for my computer to turn on then off then on again?

    Sometimes when I turn my computer on it turns off then it turns on.  I have not had any other problems with this and there is no error in the debug.  My friends Maximus 775 board used to do this a lot to.  Is this an intel thing?
    Specs
    gd-80
    i5 750 at 4.0ghz @ 1.28volts
    sapphire 5870
    corsair hx750
    g.skill ddr3 1600
    windows 7

    Quote from: dham on 15-December-09, 06:17:05
    Interesting.  I know about the GD-70 that's for am3 but wasnt aware of another gd-80 for p55.  I know there is the trinergy but hasn't been released yet. Is there a gd80 for 1366?  Anyway I have the latest bios revision but I'll try putting down to stock today and clear and test it some more.
    edit:  looks like its a p55 issue
    http://www.evga.com/forums/tm.aspx?m=5887
    evga users have noted this.
    Pretty much covers all bases if you skim all of it. Makes sense from a support perspective. But can get annoying. I think EVGA is thinking it over carefully since there could be unforseen implications in allowing the average user to have control over this.
    Quote from: gm80 on 15-December-09, 08:39:43
    See my thread here about gd65: https://forum-en.msi.com/index.php?topic=133310.0
    upon calling c/s & futher research, this phenomenon seems to be labeled "fake boot" or "double boot".
    (msi blames this on the p55 chipset & non-stock memory timings) apparently this is normal behavior (somewhat), though in reading more forums, there is some speculation that under certain circumstances this should NOT happen. resetting bios, and tinkering here & there should "fix" the condition. I don't like tinkering around so much with resetting my system 100x, as I have an old 450watt psu, so I'd like to keep it around for a few years, as opposed to tracking down a possible solution only to have to invest in a new psu prematurely or worse dealing with an rma. maybe one day I'll write up a list of things I've tried & one time or another & see If it will go away.
    Your situation may be exacerbated by the fact your system is underpowered. See my post in your thread..

  • Have to turn HP Pavilion on then off then on before it works

    Hi have just purchased a HP Pavilion P6-2467efm and Pavilion 23xi screen. Weird fault in that you turn it on and nothing much happens and then if you turn it off and on again it all seems to work. Any suggestions folks?...........JR 
    This question was solved.
    View Solution.

    Hello JohnRoss,
    I understand you have to turn the computer on, off and then back on for it to work, is that correct? I will try to assist you with this issue.
    When you first turn the computer on does the power light on the desktop come up? Also do you hear the fans come up?
    Please respond back at your earliest convenience.
    Thanks
    Clicking the White Kudos star on the left is a way to say Thanks!
    Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

  • I have to turn itunes match off then on everyday!

    Everyday, I have to turn off itunes match, then turn it on in order for it to work.  This is getting very frustrating cause to listen to music that isn't stored locally, I have to go through this procedure and it sometimes takes 5 minutes or more! 

    I have the exact same problem. My context:
    - Windows 8, iTunes 11.0.4.4, Ethernet connection through web proxy (no authentication)
    - When I start iTunes, I have the little lightning bolt in the cloud, and I cannot play any song of my iTunes match library
    - Everytime I start iTunes, I have to turn off, then turn iTunes match back on. After some minutes, I can play songs from my iTunes library again.
    - When turning iTunes match on, iTunes often crashes. When I debug it I get "Unhandled exception at 0x5B84E1119 (JavaScriptCore.dll) in iTunes.exe: 0xC0000005: Access violation reading location 0x00000002."
    (JavaScriptCore.dll is C:\Program Files (x86)\Common Files\Apple\Apple Application Support\JavaScriptCore.dll, version 7536.30.0.2).
    It does not seem to be related to my PC going on sleep or being restarted, but happens everytime I start iTunes.
    Given I'm on win8 and the original poster on a Mac - it looks more like an iTunes (client) or iTunes Match (server) problem.
    Any help is appreciated. Should I open a case with Apple?

Maybe you are looking for