Z77A-GD65 mixing two DDRAM pack, same brand with same parameters problem
Hello. I have question. My mobo is z77a-gd65. I have 16gb of ram. Is it pack of 4x4gb modules from corsair vengeance lp (CML16GX3M4A1600C9). Because one module is damaged (tested in memtest) i buy new pack. This new pack is absolutely the same as previous but only 8gb (2x4gb). Is it same brand and timings (CML8GX3M2A1600C9). My problem is.. i can not enable the xmp profile in bios. This option is not accesible if i use 2x2gb from first pack and 2x2gb from second pack. Next problem.. if i change the ddram frequency manually to 1600mhz (from 1333 - detected whith bios) which is default fq after save settings and restart, bios automatically set frequency to 1333. I try use oc genie but the same and no luck.
Is not possible use two different memory pack from one brand with absolutely same parameters? Why i cant use and is disabled xmp option? Why bios automatically changing ddram frequency?
Thanks.
Corsair warns of mixing RAM even with the same exact part numbers. Best thing to do would be to contact Corsair and ask them to replace what you have with a factory matched and tested RAM kit. I have heard they are very good about doing that for the end user.
Similar Messages
-
How to register the same schema with same URL
I'm getting ORA-31085 error when try to register the same schema with same URl.
My requirement is that I should be able to reregister the same schema with the same URL .
I'm using the following function :
PROCEDURE validateXmlSchema(inp_xmlMsg IN VARCHAR2,
out_isValidDoc IN OUT NUMBER,
inp_xmlSchema IN OUT VARCHAR2,
out_varchar_notused OUT VARCHAR2)IS
xmldoc XMLType;
res number;
BEGIN
xmldoc := XMLtype(inp_xmlMsg);
res := xmldoc.isSchemaValid(inp_xmlSchema);
IF (xmldoc.isSchemaValid = 1) THEN
out_isValidDoc := 1;
ELSE
out_isValidDoc := 0;
END IF;
END validateXmlSchema;
This is used recursively.Until the schema is not validated for a given URL this function should keep on throwing error and once the schema is validated the data should be inserted in the DB.
But its not happening as of now instead the ORA-31085 is thrown second time.
Plz provide pointers to solve the issue."mjs" <[email protected]> wrote in message
news:g7kjk5$o6$[email protected]..
> "mjs" <[email protected]> wrote in message
> news:g7gl2g$i3d$[email protected]..
>> "Zorrrro" <[email protected]> wrote
in message
>> news:g7gcjv$a6n$[email protected]..
>>> I'm completely nuckered trying to find an answer
for this...
>>>
>>> Does anyone know how to keep the same width an
position of the submenus
>>> of a
>>> horizontal dropdown menu?
>>> Thank you in advance.
>>>
>>> Cheers.
>>
>> Doesn't a simple style="width:200px" in the input
tag work?
>
> I'll asume the answer is "yes", then. ;) You're welcome.
I believe the OP is talking about a dropdown menu like this
one
http://www.tjkdesign.com/articles/keyboard_friendly_dropdown_menu/default.asp
not about a "select menu".
I could be wrong though...
Thierry
Articles and Tutorials:
http://www.TJKDesign.com/go/?0
http://developer.yahoo.com/
helps you build applications and mashups -
How do You Transfer iTunes from One Log-in to another Log-in on the SAME computer with SAME account?
Move the files to the /Users/Shared/ folder and then to the other account's home folder.
(85927) -
I have had my ipad retina for two and a half weeks but since the week end every time i connect to the wifi network it joins then disapears as soon as i open safari for example or just disappears at intermittent intervals....i have my iphone 4s connected to the same wifi network with no such problems.
I have tried resetting the network settings to no avail
Does anyone have any suggestions?
Many thanks in advanced.I have had my ipad retina for two and a half weeks but since the week end every time i connect to the wifi network it joins then disapears as soon as i open safari for example or just disappears at intermittent intervals....i have my iphone 4s connected to the same wifi network with no such problems.
I have tried resetting the network settings to no avail
Does anyone have any suggestions?
Many thanks in advanced. -
Messed up response to calls to same servlet with different parameters
Hi,
I am facing a very strange problem on our production server which is a tomcat 3.2.3 and mod-jk . We have a servlet that recieves a couple of parameters and returns the page contents based on those parameters. Now, if two users call the servlet with their own (different) parameters, sometime the result for one user goes to another one and vice versa.
For example, if user 1 calls :
http://www.mydomain.com/servlet/DynamicPageBuild?siteID=577&categoryID=69&catName=
and user 2 calls (note the difference in parameters) :
http://www.mydomain.com/servlet/DynamicPageBuild?siteID=781&categoryID=54&catName=
SOMETIMES the result of first request ends up going to user 2's browser or vice versa!
Anyone PLEASE any ideas of why this is happening?When this happens there are two threads in the servlet container, and both of them are (simultaneously) running the same instance of the servlet. So if your servlet has instance variables, both threads (the two users) are accessing and changing the same instance variables... remember, there's only one instance of the servlet.
So if you change your servlet logic to use local variables (the ones declared inside a method) instead of instance variables, that would probably solve your problem (although it could be more complicated than that). Each thread would have its own copy of the local variables, and there would be no conflict. -
XI testing for two SAP R/3 systems with same system id/logical system
Hi
We are currently in the process of upgrading our R/3 4.7 to ECC 6.0 and plan to maintain dual landscape for DEV & QA (4.7 & ECC 6.0) for a period for testing and maintaining existing applications for fixes etc. The second DEV & QA (upgraded to ECC 6.0) are copy of respective systems and these systems are created automatically under technical systems in SLD by auto update (RZ70).
The question is, can we use the same XI system for testing inbound/outbound interfaces for both the systems i.e 4.7 & ECC 6.0 at the same time. I am aware of the fact that XI Technical/Business sytems dependent on unique logical systems, so we cannot create new business system for the upgraded DEV-II ECC 6.0 system.
For your information, we have two slds (one for XID/XIQ and second one for XIP).
What are the options without disturbing & maintaining the current XI system set up?
1) Can we change current Business systems e.g DEV010 to use new technical system i.e DEV-II ECC 6.0 for testing for a period and switch it back to DEV-I 4.7 technical system?
2) or change logitical system name of DEV-II ECC 6.0 and create new business sytem in SLD without interfering the existing setup and modify/create interfaces to use this new business system?
3) Do we need to refresh cache from time to time in XI ?
4) Any other implications
We will be upgrading XI to PI 7.1 after ECC 6. 0 Upgrade.
Any views on this would be highly appreciated.
Regards
ChanduHi
Technical System was created in the SLD automatically after RZ70 configuration in the new DEV-II system. We then modified Business System to use the new Technical system and carried out following steps:
1) Original Idoc metadata was deleted from XID
2) The port definition was deleted
3) A new port definition was created for new system
4) The metadata for each idoc type used was re-created in IDX2 , using METADATA -> CREATE
5) This brought in all known versions of the idoc segments, including the 7.1 version.
I have already checked the guides suggested for our upgrade and we are thinking of going ahead with fresh installation and migrating the interfaces.
Regards
Chandu -
Two profile two thunderbird at the same time with same user account
Dear,
I would use two Thunderbird at the same time for two different profiles with the same user accounts.
I using linux OS.
I was thinking of using:
# thunderbird -P profile1 &
# thunderbird -P profile2 &
But when launching the second command nothing happens.
Only brings in the foreground thundirbird already started.
If possible use this configuration now or in the nex future?As a rule thunderbird only runs one instance of a profile.
However, there are a couple of options you could try.
You could use an addon to esily switch profiles:
* https://addons.mozilla.org/en-US/thunderbird/addon/profileswitcher/
there is more help here:
* http://kb.mozillazine.org/Run_multiple_copies_of_Thunderbird_at_the_same_time
It does say: 'Multiple instances is intended for debugging, so use it at your own risk'.
One method would be to use: Start > Run
"C:\Program Files\Mozilla Thunderbird\thunderbird.exe" -no-remote -P profilename
there is a space before '-no'
and also before '-P'
followed by a space and the profile name
You could create a shortcut/icon to run each separate profile. -
Workaround to adding two e-mail alias accounts with same username.
I have two e-mail addresses (aliases) (for example [email protected] and [email protected]) running under one (same) username "jimmy" and the same password on the same mail server (basically one e-mail account with two e-mail address aliases). I wanted to have both added to my iPad running iOS 5. I added the first without a problem, but when I tried to add the second one, the iPad complained that an account with the username "jimmy" already exists and gave me a prompt window with two options, "Cancel" and "Edit". Cancel was supposed to cancel the whole e-mail account creating procedure and take me back to Settings/Mail, and "Edit" was supposed to take me back to editing this e-mail account so I could change it (select another username). It turned out that both "Cancel" and "Edit" threw me out of the editing procedure and put me back into Settings/Mail. Seems like a bug.
I managed to use a workaround to add my second e-mail address account (alias) to the iPad 2 with the same account username. I started creating the second account and filled in all the information but I intentionally mystyped the username as "jimmo". Now when I tapped "Done" the iPad wanted to verify the account (as normal) but soon warned me that either the username or password were incorrect and that the account may not work correctly, but it did allow me to add it. I then went in and edited this second account and changed it's incoming mail server username to "jimmy".
Now I have both e-mail addresses (aliases) using one account correctly set-up. Just thought I'd write this in case anyone would encounter the same problem/bug.EDIT: When using Mail application to check e-mails I am getting sporadic "Cannot Get Mail: The user name or password for "<name_of_account> is incorrect." The password is correct and it works when I retry. If I disable one of the accounts in the Settings/Mail (set to Inactive) then the other one (using the same password on the same server) works without hiccups. They definitely have to work on this bug and fix it.
-
Search results different for two machines on same network with same version of Lync (2013)
When searching by Department in Lync 2013, one machine displays the individuals who are members of the department while the other machine just lists the group. The same machine that displays just the group occasionally will not show contact information
(work phone, department, title) for individuals either but the other machine will. Two different Windows 7 machines but running Office 365 Lync 2013 client on the same network. I have cleared Lync cache and downloaded the latest address book. Any
thoughts on this?
Thanks,
JAREDThis isn't an explanation for what's happening, there could be many things wrong. But, it might be worth a shot to avoid the offline GAL search and go to an online web search only. This may get you more consistent results.
To test, create a new policy and assign it to a couple of users like this:
New-CsClientPolicy -Identity WebSearchClientPolicy -AddressBookAvailability WebSearchOnly
Grant-CsClientPolicy -Identity UserA -PolicyName WebSearchClientPolicy
Grant-CsClientPolicy -Identity UserB -PolicyName WebSearchClientPolicy
If that works, you could change your global and other client policies to use the same method. There would be a bit more of a load on the server, so if you have thousands and thousands of users you may want to plan accordingly.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications -
Hi all,
This is really bizarre... and very frustrating.
I own an IQ506 (with TV tuner) which I have been pretty happy with. So much so, that I had my office buy one, too (IQ504). But lately, my computer has been acting up (locking up, freezing). Funny enough, the IQ504 we bought for work has also been acing the same way.
Today, the IQ504 at work died. We ran the boot-up diagnostics tool and discovered a problem with the hard drive (not detected).
I came home to a working TouchSmart, but before I went to bed, I tried waking it up from Sleep only to see the Vista donut of death. So I did a forced shutdown and reboot. I then got a "media missing, please reboot" error. So I did. Multiple times only to see the same error. I try to run the F9 diagnostics (which is sluggish to run) and find the the diagnostic tools cannot find the HDD. I reboot again and go into Setup. Sure enough, no hard drive detected.
This strikes me as being a strange coincidence. Both PCs, in different parts of the city, BOTH die with the SAME error on the SAME day?
Hard drive dead? or could the SATA controller be dead?
Please don't tell me that all the new pictures of my daughter's birthday are now gone...
Is this something HP would cover under warranty?
What can I do?
Thanks,
doon
IQ506 running Vista Home premium. One peripheral attached: HP LaserJet.
Message Edited by doon on 12-17-2008 01:32 AM
cheers,
doon
This question was solved.
View Solution.doon wrote:
misery loves company. thanks for the post!
could you take a look and see what model hard drive it was? i had a seagate barracuda ST3500620AS.
Would be interesting to know if you had the same one.
I am thinking that there may be an overheating issue with the drive or TouchSmart which fried the drives electronics.
Please let me know if the tech figures anything out.
Thanks again for posting!
cheers,doon
Same ST350062OAS as yours.
Recieved the new HDD this morning and it is a Hitachi Deskstar P7K500. Model # HDP725050GLA360
Guess the Seagate isn't their preferred drive anymore???
Link to drive info:
http://www.hitachigst.com/tech/techlib.nsf/techdocs/30C3F554C477835B86257377006E61A0/$file/HGST_Desk...
John
Message Edited by thehatguy on 01-06-2009 08:53 AM -
Selecting two different Names using the same table with same field
Hello,
I am trying to display several fields from different tables. Here are some of the fields that I need: The instructor needs to go after the social.
WESL | ENGR-1101-SW1 | Hinojosa | Ashley | Social | Instructor |
I am using a table where they have the social and I need to get both the student and the instructor. How do I select the instructor when the instructor's id is on a different table. example
CLASS PERSON CLASS_ASSIGN
student_id student_id: name facutly_id
Here is the code that I have so far and it works.
rem ----------------
rem Filename: cer.sql
rem Purpose: to get data from banner and put into flat file
rem Date: August 17, 2006 4:51 P.M.
rem Author: Robert Hernandez
rem ---------------
rem Notes: Need to add the Instructor - having problems
rem using the same spriden_id.
rem Also need to have admissions enter the grad date for
rem several students: Procedure is working as is.
declare
l_output utl_file.file_type;
grad_month varchar2(2);
buffer varchar2(1000);
cursor cursor1 is
select ssrmeet_bldg_code,
ssbsect_subj_code,
ssbsect_crse_numb,
ssbsect_seq_numb,
spriden_last_name,
spriden_first_name,
spriden_id,
scbcrse_title,
ssbsect_term_code,
sfrstcr_grde_code,
sorhsch_graduation_date,
decode(substr(sorhsch_graduation_date,4,3),'JAN','01',
'FEB','02',
'MAR','03',
'APR','04',
'MAY','05',
'JUN','06',
'JUL','07',
'AUG','08',
'SEP','09',
'OCT','10',
'NOV','11',
'DEC','12') as grad_month,
sorhsch_sbgi_code
from ssbsect,ssrmeet,sfrstcr,spriden,scbcrse,sorhsch
where rownum < 200
and ssbsect_seq_numb like 'S%'
and (ssrmeet_term_code = ssbsect_term_code
and ssrmeet_crn = ssbsect_crn)
and (ssbsect_crn = sfrstcr_crn
and sfrstcr_pidm = spriden_pidm
and length(spriden_id) = 9
and substr(spriden_id,1,1) <> 'A')
and (ssbsect_crse_numb = scbcrse_crse_numb
and ssbsect_subj_code = scbcrse_subj_code)
and spriden_pidm = sorhsch_pidm
and sorhsch_graduation_date is null
order by ssbsect_crse_numb;
begin
l_output := utl_file.fopen('CER','rbfpce.txt','W');
for cur1_rec in cursor1 loop
buffer:= cur1_rec.ssrmeet_bldg_code||'|'||
cur1_rec.ssbsect_subj_code||'-'||
cur1_rec.ssbsect_crse_numb||'-'||
cur1_rec.ssbsect_seq_numb||'|'||
cur1_rec.spriden_last_name||'|'||
cur1_rec.spriden_first_name||'|'||
substr(cur1_rec.spriden_id,1,3)||'-'||
substr(cur1_rec.spriden_id,4,2)||'-'||
substr(cur1_rec.spriden_id,6,4)||'|'||
cur1_rec.scbcrse_title||'|'||
cur1_rec.ssbsect_term_code||'|'||
cur1_rec.sfrstcr_grde_code||'|'||
'20'||SUBSTR(cur1_rec.sorhsch_graduation_date,8,2)||
cur1_rec.grad_month||'|'||
cur1_rec.sorhsch_sbgi_code;
utl_file.put_line(l_output,buffer,false);
end loop;
utl_file.fclose(l_output);
exception
when no_data_found then
utl_file.fclose(l_output);
end;
/Can you be more precise , please :
- which table stores the people identities ? (I call this one Identity)
- which table gives the class where the student works in (I cal l this one Claa_attendees)
- which table gives the instructor of a class (I call this one Class)
If your issue is that you have one table which stores Itendities , and you need to display Student identity and Instructor Identity, you have to call this table twice in your query , using table aliases . I mean :
Select Stud_iden.name, Instr_iden.name
From Identity Stud_iden, Identity Instr_iden, Class_attendees, Class
Where Class.clas_id = class_attendees.class_id
and class.instructor_id = Instr_iden.people_id
and class_attendees.student_id = Stud_iden.people_id
Is this what you need to do ? -
Two entries in Keychain Access with same name
I created a new keychain called "new-system" using Keychain Access. I set the password of this keychain to something besides my login password. Then I read something that I would not have to keep entering the keychain password to unlock the keychain if I changed the keychain's password to be my login password. I did this.
Now, when I invoke Keychain Access, I have two entries for "new-system" listed under keychains in the upper left. Each of these keychains takes a different password.
What is happening?Hi V.K.
There are 2 files in ~/users/'myname'/library/keychains/
login.keychain and 'myname'.keychain
In Keychain Access however, I have 2 x login and 1 x 'myname'.
Thanks for your interest!
(I also have 2 x login in every other account including root... and I've used the Keychain Access "First-Aid" etc. etc. on them in every possible combination)
Message was edited by: vectr -
We have iPad and ipad2 with one email address but two owners. How can we share purchases, receive same email messages but have individual accounts at the same time? Can we have same Apple User ID with different passwords? Hepl!
Aside from the fact that we have hijacked this thread - which we really shouldn't do - you would probably be better off posting questions or seeking advice in the iCloud portion of the Apple Support Communities. I'm sure that there are a lot of more experienced iCloud users on that site than I am.
I'm not a big believer in iCloud at this point, so my experience with it - other than downloading past purchases - is really pretty limited. I would not want to steer you down the wrong path.
However, here is the Apple iCloud support website that is loaded with all sorts of information and links to even more information. This will get you started anyway ....
http://www.apple.com/support/icloud/ -
Parallel execution of same program with different parameters.
Is it possible to start the same plsql routine parellelly from PLSQL.
Begin
prog1 1 1000
prog1 1001 2000
prog1 2001 3000
End;
I mean to say something like in Unix where in you can
prog1 1 1000 &
prog1 1001 2000 &
prog1 2001 3000 &
Thanks.There are two methods in Oracle. DBMS_JOB and DBMS_SCHEDULER. These are APIs that allows you to create background PL/SQL processes.
Details on both APIs are in the [url http://download-east.oracle.com/docs/cd/B19306_01/appdev.102/b14258/toc.htm]Oracle® Database PL/SQL Packages and Types Reference guide.
Example (using DBMS_JOB):
declare
jobID number; -- job ID returned by DBMS_JOB for scheduled job
begin
-- schedule 3 jobs for starting at SYSDATE, as once off jobs as we
-- do not specify any interval
DBMS_JOB.Submit( jobID, 'prog1 1 1000;,' SYSDATE );
DBMS_JOB.Submit( jobID, 'prog1 1001 2000;,' SYSDATE );
DBMS_JOB.Submit( jobID, 'prog1 2000 3000;,' SYSDATE );
-- only when these job submissions are committed, will the job queue
-- processing pool see these jobs
commit;
end; -
We have created a stage schema and tested application which is working fine when we are moving it to another schema for further testing ( This schema is created using same scripts which were used to create objects in staging schema) the performanc of application (Developed in .NET) slows down drastically
Some of the store procedures we have checked at Databse/SQLdeveloper level are giving almost same performance but at Application level there is lot of difference
Can you please help
We are using Oracke 11g DatabaseAre you using the Database Cloud Service? You cannot create schemas in the Database Cloud Service, which makes me think you are not. This forum is only for the Database Cloud Service.
- Rick Greenwald
Maybe you are looking for
-
Desperate help needed to configure WVC210 for remote access?
Hi, I'm new and desperately need some help on setting up my WVC210 for remote access. I manage to setup and see images from my WVC210 using my home LAN via both wired and also wireless. I have 2 questions: (a) for wireless connection, i only manage t
-
Streaming New iTunes Library without original synced iTunes library connect
I was wondering if the Apple TV won't let you stream a new iTunes Library if the original Synced iTunes library isn't connected. Does anyone know if this is true? I've been trying for quite some time now to stream a new iTunes library, but the apple
-
When using image processor my images to select are grayed out
when using image processor my images to select are grayed out, when they wernt yesterday? any clues? Have I done something stupid! many thanks carol
-
Ichat crash when doing video chat / audio / share screen
Hi Guys, My ichat is crashing as soon as I try to do: - Video call (in and outbound) - audio call (in and outboud) - share remote/my screen It is a recurring pblm and I got the same error (See below) I tried reinstalling 10.6.4 combo but yet same err
-
Nokia E6 - Anna+Social 1.3 - can't see notificatio...
Hi, I'm new owner of E6 and for 2 days I'm looking for 2 things in Nokia Social app. 1. I can't findhow to delete post sended to Facebook 2. I can't see new notifications on FB. There is no sign, that you have new notification... Anyone know the solu