Zen Micro Freezes during play and sometimes won't turn on at

I have been having some issues with my micro and wondered if anyone could help. I didn't drop it or do anything I can recall to cause these issues, it just seemed to start out of the blue. 2 things are happening. Sometimes it will freeze during play and "buzz" (it's really just transmitting a countinuous sound of a millisecond of what it was playing like if the guy was saying apple, and it freezes when he starts to say it it will sound like "aaaaaaaaaaaaaaaaaaaaaaaa" but in a completely illegible buzz way). Second, it will sometimes not turn on at all, no creative logo, no lights, no nothing. Once I take out the battery and replace it, it will always then start no problem. The battery does not seem to be loose at all as the above mentioned buzzin will not stop until I remove the battery, and as I have repeatedly removed the back of the micro during these buzz session?the battery remains firmly seated and the buzzing continues until I remove it. So far I have updated the firmware to 2.2.02 (which I believe reformatted) which didn't stop it from freezing up during play, and just now did a disk clean up (which I can't imagine will have any change?if a complete format didn't). I haven't had the start up problem since the firmware update, but I haven't turned it on and off that many times yet. Any ideas? Sorry to be so verbose but I wanted to explain as best as I could what's wrong, and what I've done so far.

Remove SIM and miniSD card first. Try to boot.
The try hooking it up to the PC again. And see if you might be able to redo the update process.
You can also try a hard reset. As described in a different tread. (Or read below).
Othervise, I afraid you will have to take it to a Service Center.
-- Quote from djassa1 (Re: N80 won't start up!)--
Just reset to factory default.
You will need your 2 hands to do that: While the phone is off press and hold the [Green call Button] + [3 digit button] + [* button] and power on and hold the powwer button. Do that until the phone asks you for the local city reference.
-- End Quote --
Best of luck!

Similar Messages

  • Zen Micro Freezing While Play

    My Zen Micro is my second MP3 player. My first one was a 2.5 GB Rio Nitrus. It was everything I needed it to be until it started acting funny. It froze up a few times while playing. Then I went on vacation and a week later when I got back and tried to use it, it froze again only this time it wouldn't restart correctly. I'm worried that I might be coming into a similar problem with my Zen Micro. It has never frozen until today. I hadn't used it in a week, similar to what happened when my Nitrus went on me. It paused for about 20 seconds when I was running on the treadmill, and then later, it completely froze. The only thing I could do to reset it was take the battery out of the back. It appears to be fine now but it has me worried. Is there anyone who owns a Zen and experienced similar problems and should this be something I worry about? It especially ticked me off today because I just spent $20 last night for a new holster and belt clip for it. Anyone have any input?Message Edited by diesel6304 on 0-06-2006 08:29 PM

    It might be because you were running on the treadmill and you experienced "head crash", where the heads reading the HDD inside your Micro hit the HDD itself. Best to not do that. I use it on the treadmill, but I only powerwalk on the treadmill......
    Oh yeah, in addition, it's normal every now and then for it to freeze (okay, not normal normal, but unless it's doing it regularly, it's not really that much to worry about). I would suggest running a disc cleanup from the recovery mode.Message Edited by RMskater on 0-06-2006 0:53 PM

  • Zen Micro FREEZE during trans

    Hi,
    I'm having a problem with my Zen micro. When I try to sync it to Windows Media Player 0, it freezes at various points, usually at the "Synchronizing Files to My Zen" stage but sometimes at other random points too. It will be frozen on the docked stage (with teh arrows on the player dark) and I'll have to unplug the USB cable before it does anything. This is also a problem when using Napster to go... when I click and drag, the song will transfer up to exactly 50%, then Napster claims that my device stopped responding. The funny thing is that this only really seems to happen when there are songs already on my player... when I reformat and empty out my micro, it loads fine. The player itself works fine with the songs from the original upload.
    Any advice? I have it updated to the 2. firmware (but the freeze on the WMP 0 also happened with the 2.0 firmware). I've rebooted, cleaned reinstalled everything on the comp and the player multiple times and I have the USB connected to the back of the computer.Message Edited by BOC on 03-2-2005 2:02 AMMessage Edited by BOC on 03-2-2005 2:04 AM

    BOC wrote:
    Hi,
    I'm having a problem with my Zen micro. When I try to sync it to Windows Media Player 0, it freezes at various points, usually at the "Synchronizing Files to My Zen" stage but sometimes at other random points too. It will be frozen on the docked stage (with teh arrows on the player dark) and I'll have to unplug the USB cable before it does anything. This is also a problem when using Napster to go... when I click and drag, the song will transfer up to exactly 50%, then Napster claims that my device stopped responding. The funny thing is that this only really seems to happen when there are songs already on my player... when I reformat and empty out my micro, it loads fine. The player itself works fine with the songs from the original upload.
    Any advice? I have it updated to the 2. firmware (but the freeze on the WMP 0 also happened with the 2.0 firmware). I've rebooted, cleaned reinstalled everything on the comp and the player multiple times and I have the USB connected to the back of the computer.Message Edited by BOC on 03-2-2005 2:02 AMMessage Edited by BOC on 03-2-2005 2:04 AM
    BOC, I had this problem with my ALi USB 2.0 card. Try adding a USB 2.0 PCI card (u can probably buy one for around $0) using a chipset which is not ALi. Does this make any sense to you? Don't know what your level of technical expertise is, I can simplify if you want.

  • IPod tough quit during update and now won't turn on or sync up

    I was doing the recommened os6 update on my daughters IPOD touch last night and during the update it went to a light blue screen and now it won't do anything.  When I hook it up to the computer it won't turn on it and it doesn't show up on itunes.  I did the power/home button reboot and it still comes up with a blue screen.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • Zen Micro Freezing and recovery m

    Hey folks,my zen micro is about two and a half years old and suddenly the other day it stopped responding and went into recovery mode. i hav clicked on clean up - nothing happens, format all - it freezes, reload fireware - it freezes and finally reboot - and i am brought right back where i started. When i?plugged it into my pc it became unstable and noticed that all my music had been deleted and the computer doesnt always recognise my zen. I downloaded a new fireware from this website and tryed to install it's but it wouldn't let me saying that there?was a program associated with the mp3 open and to close?the program?first and i dont know what that program is. this all just happened today, one day its working fine and the next i have lost everything. can anyone please give me advice. Thanks,Stephen

    I have the Zen Vision M and I am having the exact same problem! I cannot fix my zen. And when I try to download the firmware from this site, the site does not recognize my zen!

  • Zen Micro freezes when boot or in recovery m

    In brief, my Zen Micro freezes at booting up or in recovery mode.
    It stops at the "Creative" logo. I've tried to do everything in the "Recovery Mode" but none ofthem seems to run. Tried "Disk Cleanup" but it stucks at "Scanning Disk..." and stays on and does nothing. I know it is supposed to show you the status in percentage, but it doesn't get to that point. Tried "Formatting" but it displays "Formatting..." and stucks and does nothing. It is able to"Reboot" but upon rebooting, it freezes at the "Creative" logo screen again.
    During the time it's turned on, the computer would not recognize the player as "connected", I couldn't do firmware flash/upgrade. The computer also won't recognize as a removable storage. The Zen Microis in perfect condition, I haven't dropped it once, bought it for less than 2 weeks. Current version of firmware is .0.03 (as i recall). model # DAP-MD0004
    Any comment is greatly appreciated!! Thanks =)
    ps.
    and yes, my battery drains when the player is off (and not in standby mode), with or without headphone plugged in.

    <SPAN>Hi kaic,
    <SPAN><SPAN>My Zen Microphoto has exactly the same problem you described. What I like to know is if you got it replaced or if somehow you could fix it yourself. And if Creative replaced it, which they said the problem was?
    <SPAN>Thanks a lot,
    <SPAN>Fer

  • Zen Micro Freezes when I plug in USB cable+USB not recognized at ti

    Ok, I know you, the reader, has heard this complaint posted over and over on the Creative forums, and you would probably tell me to SEARCH THE FORUMS. Well, I did, and I found no answer or solution to my problems. So..here goes nothing.
    I recently purchased a Black 5gb Creative Zen Micro, I was really content and happy with it...that is until I plugged it into my USB 2.0 Card. The moment I do that (I've tried plugging it in into every USB 2.0 slot, and NO, this isn't a hub, but a PCI card), The Zen Micro freezes! I have to resolve this by removing the cover and taking out the battery, then reinserting the battery. At the same time my Zen Micro freezes, a little bubble pops up on my computer screen saying "USB Device Not Recognized". I'm going absolutely out of my mind here, and am on the verge of returning the Zen Micro, and might get a replacement, and if that doesn't work, just returning the Zen altogether for a refund and getting a Rio Carbon. I really like the Zen, so PLEASE PLEASE help me out here!
    Things I've Tried That Did Not Work:
    -Uninstall/Reinstalling Zen Explorer, Mediasource (basically everything on CD)
    -Updating the drivers for Zen Micro found on Nomadness.net
    -Updating Firmware for Zen Micro
    -Going into rescue mode and cleaning up, Formatting, reloading firmware, and rebooting.
    -Trying the USB 2.0 Card in different PCI Slots
    -Rotating the order in which I connect the USB cable to Zen Micro and PC
    -Uninstalling/Reinstalling the drivers, even when the Zen Micro pops up as "Unknown Device"
    -Reading tips/hints on Nomadness.net
    I have scoured the forums, and have not found anything useful or new. I know its not the USB 2.0 Card's problem, since I plugged in my USB mouse into all the ports on the USB Card, and it worked fine.
    Note: When I plug the USB cable that came with the Zen Micro into the integrated USB slots on the motherboard (USB .), it at times, does work, but even then, not a high chance of it happening. Even if I do successfully connect the Zen to a USB . slot without it freezing up, the Zen ends up not being detected by any program, like Window Media Player, Mediasource, or Creative Zen Micro Explorer.
    I am going out this weekend and am gonna try to buy a new USB Cable, and if that doesn't work, returning the cable, and returning the Zen Micro to be replaced. AND IF THAT DOES NOT WORK...GOODBYE CREATIVE! HELLO RIO! But please, any help you guys could give would be greatly appreciated. I will also try to contact Creative Customer Support, but I doubt they'll tell me anything new, if I could even connect to them without being put on hold.
    System Specs:
    Windows XP Professional SP2
    Creative Zen Micro Firmware .02.05
    USB 2.0

    Yep, that's exactly my issues to.....no matter what I've done, including replacing the USB 2.0 card which WAS and Adaptec DuoConnect 2.0 card which works fine with every other USB device ever connected to it, the Zen Micro 6g is NOT recognized by Creative Media Source or WMP. It is only recognized by the PC in Device Manager, and it has a yellow marker on it, which tells me the drivers are not installed. I know I don't need the drivers installed, but even after installing them, it tells me the drivers are not installed.
    However, the answer is: it's definitely not the Micro, since it works flawlessly on my other PC and on my Toshiba notebook. So, it's some compatibility issue on that one PC. Since I refuse to let things be, I am reformatting that PC, reinstalling from scratch with WinXP and sp2. This PC has WinXP Pro but it has other issues so a reformat is in order anyway. Hopefully, this will resolve the issues. If not, then I say it's incompatibility with the Intel 865Perl m.b. But I'm at a loss as to why it won't work when plugged into the Adaptec card too.

  • My iPod 160GB classic keeps freezing during play.

    My iPod 160GB classic keeps freezing during play.  Have restored it via itunes and now it won't sync completely.   Is there a way of running a defrag or reformatting the ipod?

    Yes, I think so.
    tt2

  • Zen Micro freezing on connect

    Hi
    I just bought my Zen Micro today and had no problems with it at first. I charged it until it was fully charged and then plugged it into my computer. It was detected by the computer and everything seemed to be working well. I ran Media Explorer and imported some music into my Zen Micro. I disconnected my Zen Micro from the computer and tried out the music. Everything was fine.
    So I decided to plug it back into my computer and import some more music. The Zen Micro was again detected. I run Media Explorer again but this time it indicates that the player isn't plugged in properly. At this time my Zen Micro had froze. So I took out the battery and tried it again. I plugged it into my computer and ran Media Explorer and I got the same result.
    So I tried the Clean Disk method and rebooted. It still wouldn't work. I tried to download the firmware update but when I connected my Zen Micro to the computer and tried updating, the firmware program would indicate that my Zen Micro could not be detected even though Windows detected it. My Zen would also freeze up.
    So this time I tried formatting it from the same menu with the Clean Disk option. It still didn't work. So I tried using the different USB ports on my computer and it still didnt work. So I went over to my brother's computer and sadly I got the same result. So I tried downloading the updated version of the Media Explorer. Even then I still got the same result.
    Can someone please help me~? I really don't want to have to return this lovely player because I got the last Limited Edition box at the store I bought it at. ThanksMessage Edited by hakuto on 0-03-2005 06:38 AM

    Has anyone come up with a solution to this problem? I too have ran into a brick wall where the Zen Micro will crash whenever connected to a PC (or mac at that), but will not crash when connected to the AC adaptor. This happens after multiple disk cleanups, formats, and even a firmware reload, although the problem still remains and now I cannot even load a firmware to the player. I also tried using another USB to Mini USB cable I have lying around, only to the same results.
    Please help ASAP so I can finish this review...
    Best regards,
    -R. Scott Clark

  • Zen Micro freezes on creative lo

    My creative zen micro freezes on start up at the creative logo. I see this is a popular problem, and yes I hear clicking of the hard dri've. I've only had it two weeks and this isn't cool. I would recommend a Rio. In the creative warranty it says does not cover any "Damage from external causes such as floods, storms, fires, sand, dirt, earthquakes, an Act of God, exposure to sunlight.." Geez, I sure hope they don't consider this an act of god. Now, I must wait the 2+ weeks for my replacement. Not a happy customer.
    Btw, has anyone fixed this problem? It doesnt seem so.

    Yea, I've read the FAQ and troubleshooting. I can get into rescue mode but when I select any option it then freezes along with more clicking. I've spent the last two hours reading about this, I'm quite certain it's hard dri've failure/sticking. My last mp3 player got stolen and I had to wait a week to receive my zen micro in the mail. Now I have to wait another few weeks to have it fixed. I need it at work, so my life sucks without my mp3 player. This is very not cool. Thanks for your reply, btw. Unfortanetly, I don't think there is anything I can do.

  • Zen Micro Freezes:On SO

    OKay i JUST got my zen micro like 4 hours ago and it worked good then it froze once and i had to take out the battery to turn it off... then it did it again and everytime i put the battery back in it says its rebuilding my library and will get stuck thier after it finishes rebuilding... or it will go another step and go to the song i was last listning too and then will again freeze... please i need help i couldnt have dropped it or anything i got it 4 hours ago...

    OMFG WOW I Just Got A Puppy And i left the Zen Micro On the Bed And Left the room for like 0 seconds and now he bit the wire on the earphones and the left one doesnt work now............... do you think ill still be able to return it's? and i think he also bit the pouch that the thing came with one of those black pouches and made a little mark in the bag... a little rip mark..... if i cant return this this dog is going the f*k out of here.........Also I ordered the thing Online... You still think ill be able to return it's

  • Everytime i eject my ipod and reconnect it all my music is gone. and sometimes while i try adding music to it. itunes completely freezes. please help. and sometimes when i plug it back into my PC i have to rename my ipod and such

    Everytime i eject my ipod and reconnect it all my music is gone. and sometimes while i try adding music to it. itunes completely freezes. please help. and sometimes when i plug it back into my PC i have to rename my ipod and such

    Antivirus has a tendency to freeze iTunes sync Operation with iPod Classic, causing a timeout, which corrupt your iPod filesystem, so when iTunes can't read the iPod, it is pointing to this problem. Other causes is when your iPod hardisk is dying, or your battery is dying causing hardisk crashes.
    My suggestion.
    Connect your iPod to the PC and run chkdsk, to fix any iPod diskerror, then disconnect it, after chkdsk complete.
    Disconnect your PC from Internet. (just to make sure no nasties creep into your system while you syncing.
    Stop the Antivirus program
    Connect your Ipod to the PC
    When iTunes Open up, Restore your iPod please, this is for iTunes to map correctly, to fix the corrupted filesystem.
    When Restore complete, eject the iPod and reconnect again.
    Sync your ipod, preferably manually Manage in small batches and disconnect after every batch, to check that all is well, since you got such a huge library.
    When all sync is complete, and iPod disconnected, start back your Antivirus and connect back the Internet.
    If this doesn't resolve your problem, then let me know.
    Good Luck!

  • I bought a song on iTunes...but it must not have downloaded all the way an now I can't get it to play and it won't let me delete it...I also can't purchase it again cause it says I done bought it...any suggestions?

    I bought a song on iTunes...but it must not have downloaded all the way an now I can't get it to play and it won't let me delete it...I also can't purchase it again cause it says I done bought it...any suggestions?

    Try this:
    http://support.apple.com/kb/HT2519

  • Cs4 crashes and sometimes won't open

    I have a brand new Macbook.  I transferred my old computer onto this one, and my Photoshop CS4 crashes constantly, and sometimes won't even open.  I took my computer to Apple, and they said it isn't a computer issue.  Adobe doesn't offer phone support for Photoshop, so I'm hoping someone here can help.

    My understanding is that using Migration to move Adobe applications does not work well.
    Uninstall all the Adobe software, run the Creative Cloud Cleaner Tool, and then reinstall.

  • My ipod is freezing during booting and my pc doesnt recognize it

    Hi
    I did a restore ipod from my ipod and after it completed it , my ipod cant boot. It freezes during booting and my computer doesnt recognize it when i plug it.
    Is there anything I can do ?
    Thanks.

    http://support.apple.com/kb/ht1808

Maybe you are looking for

  • Cannot select TC in TM for Setup

    Hello, This is my first time posting in the forums, and I'm fairly new to Macs, so forgive me if I don't do a good job of describing my problem. I just bought a new Macbook (hurray!) and a time capsule. I already have an Imac, both using Leopard. I h

  • Installing 10.6 on iMac using MacBook Pro install DVD

    Hi I have a 24inch intel 2 core iMac from early 2008 with 10.5.6 installed and I just bought a MacBook Pro with Snow Leopard. I want to upgrade my iMac to 10.6 but before I purchase it I wanted to check if my apps etc would work. I used the MacBook P

  • Issue with Google Contacts : birthdays not synching correctly

    I have an issue with Google Contacts synchronising to my iPhone. For some reason, the birthday on the iPhone uses the previous day for displaying the birthday. For example, if I put the birthday of December 30, 1987 for a contact using the online Goo

  • Photoshop cs6 student

    Are there any differences between photoshop cs6 extended and photoshop cs6 extended student version? Also for the student version is there a limit for how long you can use it after you buy it or can you use it for a lifetime?

  • Additonal Text for Part Numbered Items

    Hello, My problem is we have standard descriptions for part numbered items. I want to be able to add additional lines to explain to a buyer what the part is. Maybe one or two lines. MM02 provides kind of what I'm looking for, though this text only ap