Zen Microphoto works with USB1.1, but not USB

I recently bought a Zen Microphoto 8gb. After some trouble installing it, i finally got it to work. My computer has 6 USB-ports, where 2 is USB. compliant, and 4 are USB2.0 compliant. I connected the Microphoto to one of the USB. ports, and Windows XP installed it automatically after a few seconds. This works fine.
But I want faster transfer speeds, so I connected the player to one of my USB2-ports, expecting it to work equally there. What happens when I do this, is that Windows XP acts as the player is not installed.. A message at the systray tells me "Creative Labs ZEN MicroPhoto found", and a driver install window pops up telling me to insert the included CD to install the driver (obviously because the driver now isn't implemented in XP)
I then tried to uninstall the players drivers and then plug it in the USB2.0 ports. Just the same problem.
Windows finds the drivers when connecting it to USB., but not when connecting it to USB2.0
I have Windows XP Service Pack 2 and Windows Media Player 0. Can anyone help me, as I am a music artist, and need a working MP3-player.
Thanks.

Hi,
I have the same problem actually. Works fine on my USB1.1, but it was a bit slow, so i bought a PCI USB 2 Card. When I plug it in, I get the generic hdd and nothing in iTunes. I got it working a few times in the USB2, but only after reinstalling and installing the iPod software, but it stops working the next time i connect to it.
Not sure what the issue is so far.

Similar Messages

HylaFax on OS X 10.4.7 Working with internal modem but not USB Modem

I have managed to configure and install HylaFax on a powerbook G4 with an internal fax/modem.
Only a couple of hangups to get that configuration to work.
As per the prerequisites outline here:HylaFax Prerequisites
You need the Xcode tools to use it's compiler.
The only other thing you may not have is:
libtiff
ghostscript
If you are running an x-serve you probably already have an MTA as well (postfix)
There are someOS X Specific install instructions of which I only had to follow the first couple, to create a user. Some of the latter instructions I found unecessary since startup is handled by launchd as far as I understand.
Before I compiled I had to put the hylafax source on a thumb drive, I know it seems wierd, but it worked. Something to do with the HFS+ format of the hard drive. But low and behold it worked. (the hylafax website mentions issues with other disk formatting besides UFS, but the fat32 formatted thumb drive worked for me)
A little side note:
You need to actually download the ghostscript fonts from the ghostscript project FTP site and mv them to the proper location:
/usr/local/share/ghostscript/8.54/fonts/
Once installed run:
/usr/local/sbin/faxsetup
It should prompt you to install your modems.
After doing this I had to start hylafax
#sudo /usr/local/sbin/hylfax start
and run a faxgetty command to enable incomming and outgoing
#sudo /usr/local/sbin/faxgetty ttys.modem
After doing so I was able to receive faxes and open them up with a pdf viewer, as well as send faxes via an application or printer driver on the mac and PC (windows xp with win hylafax print) Super SIMPLE! which is great for end users.
Okay so here is why I am actually posting on here. It is great that I got this working, but the final configuration will be on an x-serve that has no internal modem, and I would like to use more than one modem in case of high traffic incoming and outgoing. I purchased 2 apple usb fax/modems and when running faxaddmodem it even recognizes the modem, but never is fully able to use it like the internal modem. If anyone has any insight it would be great.
The issue I am seeing is that when I run
/usr/local/bin/faxstat -s
The modem says Waiting for modem to come ready
Thanks!

Just wanted to say I got hylafax to work with a usb modem on a powerbook, not sure if it's stable and user friendly enough to be used my a wide base here, but it's definitely cool, and it does work. I just wish it had LDAP/mysql integration, instead of the flat file business it has.
Anybody with any input on hylafax would be great.

Windows 8.1 64bit. Webcam works with "Camera" app but not with Skype.

I've spent a few hours googling and trying out various things - all listed below. I give up - any ideas??? OS: Windows 8.1 64bitMemory: 32GBWebCam: Microsoft VX-7000. As per subject - the webcam works with the "Camera" app but not with Skype for desktop or for Modern UI (or the Microsoft Lifecam software for that matter). Already attempted: 1) Uninstall webcam drivers - download latest from microsoft (Windows 7) and install in Windows 7 compatibility mode.2) Close (from taskmgr) anything that looks like it might use Webcam. 3) Run Skype for Desktop in Windows 7 and 8 compatibility modes None of the above work. In Skype for Modern UI the webcam doesn't appear in the drop down in Settings - so I can't even select it. In Skype for desktops (version 6.11.32.102) the webcam is found but instead of image I get "Can't start video. Try closing other programs that might be using your webcam". I see from a bit of googling that various people seem to have the same issue (i.e. Webcam works with Camera app but not Skype) - so I'm hopeful someone has found a workaround / fix to this issue and I've just not had the googling skills to find it Thanks, - Matt Symes

OK - I appear to have resolved the issue. I restricted my google terms to [vx-7000 site:microsoft.com "windows 8.1"] Which uncovered this article: http://support.microsoft.com/kb/933311 I noticed there were a couple of Windows 7 x64 specific registry settings that were mentioned so I checked these and they weren't as per the article. In fact - one of the Registry Keys was already used by other software "AI Charger+" which is some ValueAdd software that came with my motherboard. I uninstalled AI Charger+, uninstalled LifeCam driver. Reinstalled LifeCam driver in Windows 7 compatibility mode. Still not working. I returned to the registry and noticed the settings still differed from the above article. I corrected them (which involved not just amending Data but having to add new Values). I then disabled and reenabled the LifeCam from dvcmgmt.msc I was then able to get video from the webcam in the Skype for Desktop preview screen.

Isight works with photo booth but not in ichat or google talk or skype?

isight works with photo booth but not in ichat or google talk or skype?

Hi
Is this an Internal or External iSight ?
In iChat, in the Video Menu (This is to the right of Buddies and may read Audio) is Camera Enabled Ticked ?
If it reads Audio open the Connection Doctor from that same menu.
In the connection Doctor open the Capabilities tab
Does it say your Internet Connection is too slow ?
At this point I would need to know which iChat Version.
However also look in the View Menu.
Is Show VIdeo Status ticked ? (this shows green Icons next to your Buddy Pic and those of your Buddies
Next go to the iChat Menu > Preferences > Video Section
Do you see a preview here ?
Re: GoogleTalk
Have you enabled TALK on your Google Account Settings ?
You need to have a Google Mail ID (Not any other sort of Google ID)
Have you downloaded the Intel only Web Browser Plug-in to do Video in a Web Browser.
10:48 PM Tuesday; August 30, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

My firewire port works with ext hd but not with audio interface

2010 Imac 21.5 running 10.8.5. My firewire port works with ext hd but not with audio interface. The local authorized Apple tech said that I need a new motherboard, but my firewire ext drive works perfectly. I don't understand. Thanks.

You must go to the website of the audio interface manufacturer and look for, download and install updated drivers for the audio device you are using.
This is not, neccessarily, an Apple issue.

Enterprise Mgr works with one db but not the other

Hi
We have two Oracle 10g databases installed. Enterprise Manager works with the second, but not the first. I believe the problem started when we migrated the host server to another network domain. Everything else works fine, but I'm getting a page load failure when attempting to access enterprise mgr.
The second db was installed after the migration and EM works fine.
Can anyone tell me how to reconfigure this?
Thank you

by any change hostname or ip was changed during migration
also can u paste the emoms.trc ?

Have Sony reader 505, ADE doesn't recognize when attached to mac OX 10.6.8. works with reader library but not with ADE

Have Sony reader 505, ADE doesn't recognize when attached to mac OX 10.6.8. works with reader library but not with ADE

YEAY!
I just got the solution (that worked for me, anyway) from a Sony support rep. No PC or VMWare needed.
OK, you've installed Sony eBook Library v3, and Adobe Digital editions, you've set up your acocunts and authorized your computer on both of them, and you've authorized your Reader with the Sony Library application.
You go to the public library ebook download page, either through the Sony Library or just through a bookmark.
You check out a book, and open it in Adobe Digital Editions, which still won't recognize your Reader.
BUT, in the Sony Library app, you can now click "File, Import.." and go find the pdf you downloaded with the Adobe app.
On my Mac, it was in ~/Documents/Digital Editions
Import it, and drag it to your Reader.
The first time you do this, it will ask you to authorize the Reader with your Adobe ID.
Worked like a charm.

Home sharing works with one account but not another?

My family has an apple tv, we've been having problems setting up the home sharing and tried everything. We eventually decided to try my brother's apple id instead of my mother's and it worked. So my question is; why does home sharing not work with one id but works with the other? any suggestions to get it to work with my mother's id?

Try resetting the Apple TV. enter your mother's ID again. Then remove her ID on iTunes and re-add it. Then see if it works this time.

Why does my Web Handler work with Internet Explorer, but not with Firefox

I am trying to develop a web page that uses the Simile Timeline (http://code.google.com/p/simile-widgets/wiki/Timeline) with data from SQL Server.
In initial testing of my timeline I tested it with Example.xml, a static XML file in the correct format to be event data. I wrote the following in the appropriate place within mytimeline's Javascript: -
var WebHandler = "Example.xml"
tl.loadXML(WebHandler, function (xml, url) { eventSourceFamily.loadXML(xml, url) });
This worked fine with both Firefox and Internet Explorer. I then changed the assignment to
var WebHandler = "GDBTimeline.ashx?Type=Family&Userid=" + getControlValue("input", "hdnUser");
so that invoked a web handler that could look up the SQL database and return the XML that I wanted, and wrote this web handler.
This works perfectly with Internet Explorer, but with FireFox the timeline band is blank. Yet when I examine the http traffic with Fiddler2 (http://www.fiddler2.com/fiddler2/) I see that with either browser there is a response from URL
/GDB_pages/GDBTimeline.ashx?Type=Family&Userid=robertb
that returns the XML that it is supposed to.
I have previously used web handlers with Firefox before, with no problems. The Fiddler results conclusively show that the web handler is invoked, and returns the appropriate XML, and this XML is identical to the XML from the static test with Example.xml.
Where do I start looking for answers? I don't even know if this is a Simile problem, a Firefox problem, or an ASP.NET problem.
Thank you, Robert.

Problem solved. The issue: Content Type was not correct.
Visual Studio creates the web handler with dummy code like this: -
Public Sub ProcessRequest(ByVal context As HttpContext) Implements IHttpHandler.ProcessRequest
context.Response.ContentType = "text/plain"
context.Response.Write("Hello World")
End Sub
I wrote a database query that set a string variable to the XML I wanted: -
Public Sub ProcessRequest(ByVal context As HttpContext) Implements IHttpHandler.ProcessRequest
Dim Outstring as string
' my logic to fill Outstring with XML
context.Response.ContentType = "text/plain"
context.Response.Write(Outstring)
End Sub
This works with Internet Explorer. However it's not strictly correct: to make it work with other browsers as well,
context.Response.ContentType = "text/plain"
should be
context.Response.ContentType = "text/xml"
It now works with IE, FF, and Chrome, and presumably all others.

Airport express works with windows xp but not OS Tiger

Hi all
I’m a troubled man.
I have recently bought a new Mac pro along with an airport express. I am a first time user of Mac’s.
Here is my problem.
I use a DSL modem and my airport express is connected with the LED indicator in solid green. When I try to connect using my user name and password the “searching for POPPE sever appears at the top of my screen.” And after a few seconds “could not find POPPE server. This happens all the time. I tried to get air tunes working but itunes could not detect my airport express.
Now since I’m an engineer I needed to run auto cad on my Mac so I downloaded Bootcamp, partitioned my Macpro hard drive and installed windows XP on my Mac book pro and to my surprise windows xp found my airport and connected to the server straight away. So I experimented and download the xp version of itunes and what do you know the xp version of itunes detected my airport express and everthing worked fine for Windows! This suggests to me that the problem lies with the mac software as the airport express is working fine. Whats going on! I do not understand.
When I go back to tiger it sees my airport but cannot connect. I run the airport assistant but it cannot detect my airport. I run the utility airport program but it cannot see my airport express. I go back to windows XP everything works fine???????
If you can come up with a solution to this strange problem I would be very grateful.
Thanks

The user name and password may be just fine but the dialer software for OS X may be quirky to the point where it doesn't work with your modem through an Airport connection. My recommendation is to try uninstalling the DSL dialing software from the computer and setting up the Express to do the dialing for you. Your computer connection then becomes straight Ethernet.
If that doesn't work, have you checked to see if there's a newer version of the OS X dialing software available?

Attempting to use certreq -enroll to enroll to a client authentication certificate works with Windows 8, but not with Windows 7...

This has been an issue for a while now. Trying to use certreq -enroll -machine [Template Name] on Windows 7 machines fails with not implemented. When I run this command with the -q flag I see that the certificate I want is unavailable and displays:
A valid certification authority (CA) configured to issue certificates based on this template cannot be located, or the CA does not support this operation, or the CA is not trusted.
When I go into the properties of this certificate and goto the Certification Authority tab and check the "Show all enrollment servers" it shows my server greyed out with this message:
The system could not determine if you can access this certificate. Not implemented.
The template sits on a enterprise 2003 server CA and this process works with Windows 8.1 machines. Which means that the template has the correct permissions and is issued correctly.
Is this a known issue with Windows 7 or am I missing something in the config? Help is greatly appreciated.
Thanks,

Hi
I have done some tests on a Windows 7 Enterprise machine and a Windows 8.1 Enterprise machine, it turns out that I have the same issue with you.
On the Windows 7 machines, I cannot use Certreq.exe to request machine certificates, but I can successfully request user certificates, and there is no issue with the Windows 8.1 machine.
Best Regards,
Amy
Interesting. From what I can tell, there are no patches that fix this issue either...

VGA adapter works with my iPad3 but not my iPhone4

I just purchased a VGA Adapter from Apple. It seems to work fine when connected to my iPad3 but I have been unable to get it to work with my iPhone4. The monitor shows a 1024x768 signal is being received but the iPhone screen does not appear on the monitor. Is there something I need to configure to get the iPhone4 to project an image on the VGA monitor?

Iphone4 dont support mirror so only when Apps which support av out is used Will it display out of the vga port

AE Works with Ethernet Cable, but not Wirelessly. Please Help!!

I purchased the AE to run music streams via Airtunes from my wireless router/PC upstairs to my stereo downstairs. When I hook everything up upstairs with the ethernet cable, everything works like a charm, but the moment I remove the ethernet cable, the AE is not being picked up by the network. I set everything up for the wireless network (while the ethernet cable was hooked up) and have a green light on the AE, but when I try to use it wirelessly, it is blinking amber and not appearing within AirPort Utlity (only when hooked up with ethernet). I have a Westell 327W Wireless Modem/Router and could use some advice as to what I am doing wrong to get some tunes downstairs.
Thank you in advance.

Hi:
I was chasing this very topic for a long while, then took a break.
You are suppose to be able to stream music from your PC to external stereo speakers via iTunes, thru an Airport Express (AE) wirelees connection.
Here's my status:
It is pretty easy to get a wireless connection up & running so that you can play music from your laptop/pc to external wirelss speakers via iTunes, thru AE.
I have that up & running. The problem comes in when trying to add the Airport Express to an already existing Linksys router's wireless network. When setting
the AE up, you'll most likely get 4 error messages that have to be addressed before you go from from a flashing amber LED to a solid green LED. If you are just using Apple's ad-hoc wireless conncetion, you'll need to use Airport Utility to address the 4 issues. Basically, Airport Utility doesn't know how to address AE, since it doesn't have any IP address to a network. The other 3 are simlar problems. If you just tell Aiport Utility to ignore each of these problems, you will get the solid green LED on AE, and you'll be able to stream music directly from your PC to your speakers, wirelessly, once you finish the AE configuartion, and Airport Utility reconfigures the AE.
I have my HP laptop and printer setup with a Linksys 54G Router and Printserver,
so that the laptop and printer communicate wirelssly via the Linksys Router.
Now comes the fun...trying to add the AE to this already existing wireless network. I could get the AE to work when I had an Ethernet cable connected directly from a port on the router to the AE, but when I disconnected the Ethernet cable, the router no longer saw the AE in the network. I followed all of the instructions in the Airport Utility software, went seeking advice on this
newsgroup, the web, etc. Found lots of good information, but a lot of it was outdated.
I have my Linksys wirless network setup with WEP-64 encryption.
From what I have gathered, it is much easeir to add the AE to a WPA/WPA2 network, than to a WEP64/128 network, just because of newer protocols.
The problem that I have is that WPA encryption works much slower for me than
WEP encryption. Example: iTunes is roughly 60 MB is size. Downloading it
using WPA, results is a download time of 22-23 minutes; where a download
using WEP-64 takes 75-80 seconds !
In the past, what I was trying to do was add the AE to my already existing
wireless network. Now, I have a wireless network for the AE. I want to try to add this network to my already existing wireless netowrk for the Linksys router.
I just haven't taken the time to try it yet. From what Apple tells me, Linksys makes this setup messy. The fact that the AE works by itself proves that the
device is OK.
For a history of the problems that I have been chasing in trying to get the AE setup and added to my already existing Linksys router network, visit the following link in the list of "problems" on this Apple newsgroup's web page.
Search for the folowing topic title:
Problems Setting-up Airport Express to Play Music thru External Speakers
Currently, is is at the bottom of page 12 of this discusssion group.
The info in it may be useful to you.
Please let me know if you get yours up & running in the Linksys wireless
network.
Thank you
DaleB ([email protected])

Works with normal = declaration but not with .add() function call? Why?

I still have some problems in relation to my earlier post:
http://forum.java.sun.com/thread.jspa?threadID=5164571&tstart=0
Help is still warmely appreciated! Thanks already to you Franzis.
So I try to add several JScrollPanes into on Container variable allComponents.
I don't understand why in my program
allComponents = jspane;works but
allComponents.add(jspane);does not.
Same is true for Jpanel objects. In my program
allComponents = panel;works but
allComponents.add(panel);does not. Why is this?
Still I necessarily need to work with a add() function.
So where is the problem?
The whole source code is at:
http://forum.java.sun.com/thread.jspa?threadID=5164571&tstart=0
Message was edited by:
wonderful123
null

I added a response in your original message:
http://forum.java.sun.com/thread.jspa?messageID=9629812
Let's keep to it since splitting things across two posts might be confusing.

ESR,ID working with 8000 port but not with 50000

Hi experts,
I am working with PI 7.1. I am working with SOAP to ABAP SERVER Proxy scenario. I have downloaded the WSDL from ID and using XMLSPY sent a SOAP request to PI server and I got an error in SXMB_MONI under the Call Adapter step saying CLIENT_RECEIVE_FAILED.
We cross checked the services in SMICM transaction, and we missed the HTTP port 8000 for the parameter icm/servr/port_xx.
Then basis team changed the port 8000 in SMICM for the same parameter and restarted the Java stack.we checked the icm/HTTP/j2ee parameter which is having 50000 port.
Now ESR,ID,SLD,RWB... etc are working with ABAP port 8000 but not with 50000 java port and also I am getting an error in SXI_ CACHE while doing my delta refresh if_http_client receive http_communication_failure : http_communication_failure:ICM_HTTP_CONNECTION_FAILED. Kindly suggest me to resolve this error.
Naveen

Hi,
Re: Architecture of PI 7.1
NW PI 7.1 - ICM is not binding to port 5$$00
from the above two threads it is very clear that from PI 7.1 both the ABAP and J2EE ports are same.
Now we maintained both the ICM and j2ee port as 50000. Now ESR,ID,SLD are working with port 50000.
But in my SOAP to Proxy scenario I am getting the same error. When I try to send request to XI server using Altova xmlspy I am getting following error in SXMB_MONI under Call Adapter
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>400</SAP:P1>
<SAP:P2>ICM_HTTP_CONNECTION_FAILED</SAP:P2>
When i click that HTML error It shows
404 Resource not found
I am getting the following error in CC monitoring .
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessagingException: XIServer:CLIENT_RECEIVE_FAILED
My reciever communication channel is in green status CC monitoring.
I tested my server proxy in my end system which is successfully fetching data.
I am using the following URL format for generating the WSDL from Integration directory.
http://host:port /XISOAPAdapter/MessageServlet?channel=p:s:c
Do we need to maintain the Fully qualified host name in the above URL?
I tried with a test scenario which is an asynchronous communication with the above mentioned URL format. I got a success message in SXMB_MONI.
Since I am using PI 7.1 I tried the following URL also but i this case,the XML spy itself throws error. I couldnt see any messages in SXMB_MONI.
http://host:port/XISOAPAdapter/MessageServlet?senderParty=&sender
Service=FS&interface=IF&receiverParty=&receiverService=TS&interfa
ceNamespace=IFNamespace
I have seen many threads in SDN for this same error but I didn't get an answer for my scenario.
Lakshman and Manjusha
Thanks for the quick responses.
Regards
Naveen
Edited by: naveen perumal on Jul 24, 2009 8:00 PM

Zen Microphoto works with USB1.1, but not USB

Similar Messages

Maybe you are looking for