Zen NANO Plus doesn't switch more than 2 songs

Hi i have a problem with my new Zen nano plus mp3-player...
I can only switch 2 songs. If i switch to the thrid song the player automaticly shut down.
In the config menue i can switch as long as i want and the player doesn't shut down.
I formated the player in FAT32 and in FAT - System but it doesn't work acctually (Fastformatation).
And: If i wanna call the German Service hotline (+353 4380000) i only reach an private guy. I tipped in my telephon: 353 4380000 <-- is it right? Or are there any numbers before the "+" ?
Thx and bye (hope for many usefull postings )

Follow this link:
<a href=http://uk.europe.creative.com/support/downloads/download.asp?sOSName=Windows+XP&region=3&Product_N ame=Zen+Nano+Plus&Product_ID=2720&modelnumber=&dri verlang=033&OS=0&drivertype=0&x=33&y=5 target=_blank> Download Page for Zen Nano Plus[/url]
Under the firmware title, click the Show Details button and scroll down to the notes for the instructions.
Edit: Long link, my badMessage Edited by arcl on 2-27-2005 08:47 PM

Similar Messages

Zen Nano Plus wont play for more than 5 seconds at a ti

I recently bought a new Creative Zen Nano Plus and thought I was getting a good reliable product. It synced in WMP like it should but when I unplugged it from my computer and tried to listen to the songs it will boot up and start playing a song but then shut off 3 seconds later. I formatted it and updated the firmware and drivers on the player and my computer but it still wont play for more than a few seconds at a time. I tried changing the battery and leaving it plugged in but neither of the above worked. I would appreciate some help. Thanks.

Same issue with me - only mine won't even power on now...
I am waiting on reply from customer support...

My Creative Zen Nano Plus doesn't switch

First when I purchased this Mp3-player it worked quite well, but when I tried to change battery when the old one was empty, it didn't work anymore. I can't switch it on. I wonder if it's because of that I tried different battery than the one I get with this Mp3-player when I first purchased it's Does anyone know can I use Philips batteries or must it be duracell? Or does my mp3 player have some kind of different problem? I even tried to call those numbers which gives information about Creative products, but no one answered.Maybe I'll try to call 'em later.

jumpshot22 wrote:
"I found out the hard way that for it to be able to charge by USB on a computer, the software has to be installed which I think is pretty retarded. You should definitely pick up a charger cause it's a lot faster to charge and more convenient. " -- some guy who reviewed the mp3 player
i cant find where this other guy who said like the same thing
They must have been talking about a different player such as the Zen Micro which does recharge via the USB port.
PB

My creative zen nano plus doesn't work anym

Hi I've a problem with my mp3 player. It just doesn't work. After I made a powerpoint file on it (normaly that did not cast problems) it went on and in the same time it wents off. Like the battery is not loaded. I wanted to make an update with a file from the creative page, but in the same time it did not do anything. I can not turn it on. It does nothing.
Can somebody help me? Had anyone the same experience?
My problem is too, that its nearly two years old and the seller told me that i have no guaranty on it. Is this right? Can i just turn it into the carbage can?
Please help me

jumpshot22 wrote:
"I found out the hard way that for it to be able to charge by USB on a computer, the software has to be installed which I think is pretty retarded. You should definitely pick up a charger cause it's a lot faster to charge and more convenient. " -- some guy who reviewed the mp3 player
i cant find where this other guy who said like the same thing
They must have been talking about a different player such as the Zen Micro which does recharge via the USB port.
PB

My Zen Nano Plus player wont switch on anym

When i try to switch on the player it does not operate (it also is no longer registered when I connect it to the computer). I've actually had two players for which this has happened...is there anything I can do or is it fully broken?
Cheers

You could try connecting the player to your PC in Recovery Mode - see the post in the sticky threads for how to do this.
When you manage to get it connected in this way reload the firmware and hopefully it will work again.
PB

Nano Plus 1GB-- Cant play more than 30 songs

I have tried drag and drop it recognizes all songs when attached to my pc, but when I disconnect from pc the songs are not there. Help me thanks.....

What format are the songs in? What file structure are you using? Try deleting the files on the player, creating some folders in the root, then moving songs into the folders on the player.

Zen nano plus fold

I tried making a folder for my zen nano plus, but when i put a song in it it takes up memory, unlike my sisters zen micro.is there a way to make it not take up memory?

Hey Guys,
I guess I'm what you might call computer stupid. I hope you don't think that I ask too many dumb questions. Well, here goes....
I recently purchased a Zen Nano Plus, GB. (I am really amazed at what this little thing can do.) As soon as I loaded the software into the cumputer, I went to Creative.Com and downloaded everything available for it. I ripped 6 CD's to it and ran out of memory. All songs were ripped in MP3 format without using the Smartfit option. I have ~220 songs on the player.
I copied all the songs over to a hard dri've, deleted all the songs on the Nano Plus, and tried to drag and drop them all back to the player using Smartfit and converting to WMA format. There wasn't enough space to get all the songs back on that I took off. I deleted all of them then d&d back to the Nano. The player is working fine in the shuffle mode.
Now that you have the background, here are my questions: First, Is this about the limit for MP3 format songs, or is there something I'm doing/not doing to get more songs onto it's Second, the help information isn't really clear to me as to what/when/if I should use the format/initialize options. Please educate me on this issue. Third, has anyone used an FM transmitter with the Nano Plus, and if so, which one do you recommend?

Zen nano Plus, say i have alot more space but i cant upload more so

I just got the Zen nano Plus and it says on the organizer I have 698.3 MB of space left and I cant upload any more songs at all, anyone have an idea of whats wrong?
thanks

See the section "I can't seem to fit any more files on my flash player yet I have free space, why?" in the FAQ post.

1GB Zen Nano Plus player stuck in Radio mo

I have a GB Zen Nano Plus player. I use it every day, have since I got it 2 yrs ago. It has the radio feature. I switched it to radio the other morning and now it won't switch back to my mp3 music. When I push in the scroller to go to the menu, it takes me to the Radio menu and locks up. Won't scroll up, won't scroll down, can't up or down the volume, can't even turn it off... I have to remove the battery for it to quit. I have no clue what's going on. I connected it to my computer and formatted it....didn't help. Went here online and got the firmware update drivers....didn't help. I can still load music onto and play it while it's hooked to my desktop, but I can't use it any other way than radio when I'm using it solo. Any ideas?

Make sure to reflash the firmware in recovery mode (see instructions on Creative's support website), and also let the updater format the data area. If that doesn't work it's probably a hardware failure, I'm afraid...

Zen Nano PLus song list probl

I had transferred about 00 songs into my zen nano plus but when I played it, I realised that I had lost alot of songs. Check the system info and it states that I have only 34 songs in the player. When i check back on my pc, it indicates that i have 00 songs in my player.
I owned the gb version and have only transferred less than half of its capacity.
I have the updated firmware and driver installed and my songs are all mp3 format. Therefore there shouldn't be a reason the player can't play my songs.
Thanks,
NinaMessage Edited by arnina on 06-04-2006 09:40 AM

So after I posted my initial qns, I went through the forums and found out that flash based players couldn't handle too many folders. I had transferred my songs using wmp sync and by doing so, the player created folders for each individual artist and broke down further into albums. This would have been great for hdd players but not for flash based ones.
What I did was to just transfer the songs individually using the explorer. It's a tad hassling but it doesn't create all those folders.
Hope that this help for any other new users of zen nano plus or flash based player. Feel a bit idiotic answering my own question though.
Jaded_Whisper if you have any more questions, you could pm me. I could try to help you with all my newbie expertise. LoL
Cheers,
Nina

Zen Nano Plus - Dead after 20 minu

Just received my player this morning. Connected and transferred a couple of albums via windows explorer. Disconnected and had a listen, sound was ok. Reconnected to add some more music. Paste operation froze windows explorer, safely remove hardware button did nothing and the only option was a hard reset. Now player wont switch on at all, not even a logo screen and pc doesn't recognize it so cannot reflash the firmware. Most disappointing.

Thanks for the tips shellshock. I spent quite some time yesterday trying to bring the player back to life to no avail, so its now winging its way back to Amazon.
Basically it went something like:
: 8am. Grab parcel from postman and unwrap excitedly
2: Plug player into spare usb port, my 64 bit OS recognised it straight away as a 'Zen Nano Plus' so no additional driver install necessary which is just as well because there doesn't seem to be one for 64 bit versions of Windows
3: Open windows explorer and copy two folders across to player as with any UMS device (Supertramp and Erik Satie no less)
4: Unplug player, have a listen for a few minutes and farmiliarise with the menu operations and manual
5: Reconnect player to PC, which again recognizes it correctly
6: Attempt to copy and paste a further folder of mp3's to the player using windows explorer at which point onimously the hourglass mouse cursor indicates work in progress without any sign of a progress bar appearing to indicate files in transit (the player does however display a data transfer in progress animation
7: After a couple of minutes ctl-alt-del clearly indicates windows explorer (and hence the data transfer operation) have stopped responding (my pc it should be noted has a respectable spec, was built last summer is not crash prone for no reason)
8: Bollocks says I, this is not quite going to plan. Forcing the process closed via task manager and attempting to use the 'safely remove hardware' function in the system tray locks the computer up totally forcing a hard reset
9: The Nano in the meantime has stopped displaying the data transfer animation so I unplug it from the PC and power it down thinking 'oh well, hardware is known to crash occassionally, i'll need to recopy the files after a reboot no doubt'. Hah, I should be so lucky.
0: Nano now refuses to start full stop. Not even a logo. Removing and replacing batteries minutes later as recommended has no effect, holding down the power button for over a minute has no effect, different batteries have no effect
: The PC now seems to think the dead Nano is a 'STMP3500' (i'm guessing this is the chipset used by the player) and furthermore wants drivers to match. Downloading latest drivers from Creative is useless as they are only 32 bit and will not work with Windows XP 64bit, so the PC is now having none of the dead Nano
2: Attemping to activate the emergency reset by attaching the Nano to a USB port (various ports tried) whilst holding down the power button for 20 seconds or so (several times) proves futile as all my PC now wants is drivers for a goddam 'STMP3500'!
3: Latest firmware from Creative does run ok but totally fails to find the player
4: 3pm. Player is unceremoniously re-wrapped with curses into its packaging and marched to the post office for despatch to Amazon's returns department for a refund
My guess is that the failed data transfer managed to wipe or corrupt the player firmware. I'm sure all computer users are used to system crashes now and again, but they certainly wouldn't expect to have to buy new hardware each time it happened. Creative R&D department should maybe revisit the way the Nano's OS is written and protected.
After all that i'm still searching for a decent mp3 player but can find none to match the spec of the Nano at the price. Reviews of cheaper alternati'ves indicate poor battery life and questionable sound quality. Iri'ver T30 doesn't support UMS so thats a no go.
All in all a pretty negati've experience. Perhaps I was just unlucky, maybe once the refund comes through I might even give the Nano another shot, especially as the price has just dropped again by about 3 quid on Amazon......

Zen Nano Plus connection problems - SOLVED (1/2/06)

I recently bought the Nano Plus. On first installation everything worked fine. I decided to upgrade to the latest drivers and firmware via downloads from the Creative site. At some point during the firmware upgrade, everything seemed to hang. Eventually I had to halt the process, disconnect the player and reboot.
When I plugged the player back in, it is detected as a USB Mass Storage Device, but Windows Explorer and the Zen Nano Plus Media Explorer both claim that the device is not connected.
Here's what I have done so far:
)Uninstalled all drivers and Creative software, rebooted, reinstalled drivers/software, rebooted. When plugging the player in, a brief window pops up saying Zen Nano Plus has been detected. This is followed by USB Mass Storage Device being detected (this window stays up a lot longer, sometimes more than 5-0 minutes before disappearing).
2)Another uninstall/reinstall, but this time with a registry cleanup in between. Same result.
3)Tried installing installation cd on partner's laptop and plugging in the player. Absolutely everything works fine. So it's not my player. There must be something I still need to do on my desktop to get everything to work again.
4)Have also tried plugging into every USB outlet on the desktop. No change.
My system:
Windows XP (sp 2)
3.2 GHz
Intel 865 chipset
2 GB RAM
My Zen Nano Plus is currently running .0.03 firmware (latest).
On this desktop I am running the latest drivers (Creative Mass Storage Drivers .07.00.250)
When the player is plugged in, device manager shows no problems. Under Disk Dri'ves, Creative Zen Nano Plus USB Device is listed (and says the driver is from Microsoft, 7//0, version 5..2535.0). Under USB, USB Mass Storage Device is listed (and says the driver is from Microsoft, 7//0, version 5..2600.0).
I have tried manually updating these drivers to anything listed in the Creative folders upon installation, but it does not detect anything. When I check the drivers listed on the laptop that works with the player, these same driver details show up.
Any advice would be appreciated. I certainly would hate to only use my partner's laptop every time I want to update my music. I am also frustrated and puzzled as to why my player first worked on my desktop and now doesn't.Message Edited by lcvdw on 0-03-2006 2: AMMessage Edited by lcvdw on 0-03-2006 2:2 AM

lcvdw wrote:Can you tell me what I am supposed to see if it is connected properly?
With your player connected and View, Devices by Connection selected in Device Manager navigate through as follows:
Advanced Config and Power Interface (ACPI) PC
->Microsoft ACPI-Compliant System
-->PCI Bus
You should then see a series of USB Host Controllers that you will have to click through in turn to find the one your player is connected to.
Underneath each controller should be a USB Hub, and then devices are listed beneath the hubs.
For my N200 I have USB Mass Storage Device, Creative MuVo N200 USB Device then Generic Volume.
Your entry should be similar but with Zen Nano Plus instead of N200.
While you're there, right-click on the entry for the hub attached to your player and select Properties. On the Power tab it will show how much current the port can supply and in the Attached Devices list it will show how much power the player needs. In my case the hub supplies 500mA and the player needs 00mA.
PB
Message Edited by PeeBee on 2-30-2005 02:05 PM

Zen Nano Plus WON'T START / RECOVERY / RES

Hello ZNP friends and fellow victims of frustration,
I have the GB Zen Nano Plus and a Windows XP operating system. My Zen is just over 3 months old, and a few days ago I started having the "stuck on Logo or hour glass (building library) problem". Like many of you, it has frustrated me beyond belief in my attempts to correct it. I'm certainly not a computer whiz, but I'm fairly good at following clear, numbered, valid instructions. I have tried many of the offered cures for this problem as provided in the discussion forum. None have worked for me.
I have just stumbled onto/into the fix for the WON'T START / RECOVERY / RESCUE problem. At least, I hope it lasts. The bad news is that I don't know or remember the steps for the cure. The good news is that the problem can be fixed. In the frustration of trying a million variations on the steps offered in the discussion area, I happened to fix my nano plus. I was becoming like a hyper zealot playing a slot machine.
What I do remember is this:
) I did download the application ZenNanoPlus_PCFW_LF___0 and install it, and put an icon on my desktop so I could activate it easily.
2) I did double click it to call it up.
3) I attached my nano plus via USB to the computer. I don't remember if I had to do that before or after bringing up the above application. (You may have to try both.)
4) I did leave the battery out of the nano plus during this operation.
5) I was required to reformat the nano plus which eliminated anything on it. When the instruction came on to reformat, it said "... area" so I was worried that the reformat might include more than the device itself but it didn't.
6) Then I loaded a song, disconnected the device from the computer, put in a battery, and it started fine.
What a task that whole process was! Of course I'm not telling you anything new. I was tempted to just get on with life, but then I thought I should really share this with those of you who have been in the trenches...to let you know that a cure is possible.
Creative should really have a clear set of instructions by now for fixing this problem.
Good luck!
Buck

Have you updated the firmware? this could be the major cause. Also, MP3 has far fewer kinks as a uni'versal format than WMA. If possible, I highly suggest using MP3 on MP3 players.

Error Message when Trying to Rip to Zen Nano Plus

I use Zen Nano Plus Media Explorer and I get this message:
"Unable to lead database component. The program will now exit."
I can't figure out what is missing in order to correct the problem. Can anyone help me?
I use Windows XP Home on my HP Laptop.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Zen Nano Plus Playb

When I turn off my Zen Nano Plus, I want the player to resume from where I left off (usually in the middle of my audio book), but it goes back to the beginning of the file. It only started doing this recently... Is there a setting I can change so I can listen from where I left off? Thanks, Dave

It should work every time but sometimes doesn't. Others have noticed that it is more likely to resume where you finished if your pause the track first before shutting the player off.
PB

Zen NANO Plus doesn't switch more than 2 songs

Similar Messages

Maybe you are looking for