Zen Reporting Infoview not pulling the inventory info I want

I am trying to pull some useful Inventory information from the managed devices but the Report generated does not CONTAINS all the information I needed or at least not pulling the right information from the Managed devices (agents are installed) Here is the scoop: Reports -> Zenworks Reporting Server Infoview -> NEW -> Web Intelligence Document -> and here we can see the Universe Pane. The questions what to select to add item to the right pane so that I can generate some report that shows all the Inventoried pc (with agent installed) right now I selected and tried many attributes or items but only show the DNS, IP address and none of the HD, CPU, Serial number and Manufacturer and others on the GENERATED report. Here is the sample of the Reported generated for your review. It only DNS name, Machine name, Platform, machine GUID and the rest are NOT showing which were selected and there are: hard drive size, memory type and size, cpu type, vendor name and so and whole bunge of them.

jlau168,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com

Similar Messages

Report is not pulling the data from multiprovider in BI 7.0

Hi BW gurus,
We have upgraded our BW systems from 3.5 to BI 7.0.
According to our requirement we did some modifications(added some new cubes) to existing multiprovider. All the objects and assignments looks good in the multiprovider.
We are facing a problem while executing the reports, report is not pulling any data from the particular multiprovider but I can see the data from the multiprovider.
For any selection creteria we are getting the msg like "No applicable data found".
Created a sample query with only two chars and two KF's no conditions, no exceptions still the report is not populating any data for any selection creteria.
Appreaciate for your help in this regard.
-BK

Hi
Deactivate the aggregates and then rebuild the indexes and then activate the aggregates again.
GTR

Dynamic parameter selection from infoview not storing the sql password

We are having the problem of dynamic parameter selection from infoview not storing the sql password as it does for the actual report. We are using Crystal Reports XI Release 2 version 11.5.3.438 (Not sure of SP level, asked in separate thread).
To be more specific.
We have created a report that dynamically populates the parameters of the report by pulling the records from the Informix sql database and allowing selection from there.
In the Central Management Console for the report object we have set as follows:
Process - Database:
Use original database logon information from the report - the sql username and pw etc
Use same database logon as when report is run
Process - Parameters
In selecting a default selection there is the option to put in the sql password, however, this does not stick and clears after update.
As such the end result is that every time this report is run from infoview and a user chooses a parameter (there are 5), crystal goes through some timeout for about a minute or so and then requests the sql password, if a user then selects the next parameter, the same timeout and password dialog appears.
We need the crystal report to handle to the sql password for fetching the parameters as well as for the database section of running the report, however, the parameters insists on the end user always putting the password in.
This is 100% replicatable on our system.
Any way that we can fix this?
Will an update fix this issue? If so could you please advise which one?
Thanks

Hi,
I am having the exact same problem. Any help?
And what does "Use same database logon as when report is run" mean? For me that would be that no prompt is needed for getting values in a dynamic parameter...
Regards
Magnus

R/3 report that can show the inventory aging

Hi Gurus,
Pls adv whether there is any R/3 report that can show the inventory aging. We know there is a BW report RDD861 can serve this purpose but we would like to have same report pulled from R/3.
please advice asap and do the needful.
Regards
KRISHNA

Not sure exactly what your complete requirements are but you could try the following standard reports to see if any fit your needs.
Real-Time
MC50 - Dead stock
MC46 - Slow-moving items
MC44 - Inventory turnover
LIS Reports
MC.2 - Receipts/issues
MC.3 - Inventory turnover
Regards

Router 7606 does not show the inventory for the Fan module

I have a issue with a router 7606, specifically with fan module, the LC go down because it does have sufficiently cooling , I changed the Fan module, the IOS, The power supply, and I still have the same issue, Besides the Router does not show the inventory or PID for module fan,
logg" system minor alarm on operating fan count"
Someone knows what could be happening,

Check this:
Can you try this;
7606-01#show environment status fan-tray 1
fan-tray 1:
fan-tray 1 type: FAN-MOD-6SHS
fan-tray 1 mode: Auto
fan-tray 1 fan-fail: OK
7606-01#show power
Fan Type Watts A @42V State
1 FAN-MOD-6SHS 180.18 4.29 OK............................ FAn try
If above doesnt work then try the below link:
https://supportforums.cisco.com/discussion/10824271/7606-s-and-fan-module-6shs-version-1
HTH
inayath
*Plz dont forget to rate if this info is helpfull.

Listing material not in the inventory

Hi everyone.
I want to know if there is a transaction or a report that allows us to list all the material not in the inventory since a date that the user will input.
I'm a programmer but before starting developping a specific program for that i need to be sure that nothing like that already exists in the standard.
Thanks for your suggestions.

Hello,
MB51 will list all material movements that's why you may have several records for one materials (it depends how busy the WH staff was...:) )
You can create a report with uniq materialID through PIVOT table but of course it isn't the exact solution I think...
One more idea:
There's a report MB5B where it is possible to give both date and MVT as filter criteria and if you choose 'Ttls only' you will get one 'section' per material.
(Sorrowfully the format of the output of this report is very poor and I haven't succeded in running it with MVT)
BR
Csaba

Unfortunately, I lost by an update all the apps on my iPad 2. Now I can not pull the data from the cloud to my iPad. How is this possible?

Unfortunately, I lost by an update all the apps on my iPad 2. Now I can not pull the data from the cloud to my iPad. How is this possible?

If you just installed iCloud does that mean you updated the iOS that's running on your iPad? If so, you'll want to restore all the programs you have from the backup you hopefully made.
Refer to these articles for help.
iTunes: Backing up, updating, and restoring iOS software.
If you don't want to use iCloud, simply don't activate it.
You can also download the programs again.
If you live in a country that supports re-downloading apps then you can re-download them. You can refer to this article for more help.
Downloading past purchases from the App Store and iTunes Store
What to know if your country supports downloading past purchases?
iTunes in the Cloud Availability

Folder mapping with Unix XI box / XI is not pulling the file from folder

We have installed XI on Unix box. We have developed a test scenario using file adapter and tested the mapping program. it's executing successfully. Problem is after completion of configuration XI server is not pulling the file from the assigned folder. I think we need to map that network driver with the XI server. Hope my assumption is correct if not correct me and please help me to resolve the problem.
any help appreciated
Regards,
Venkat Bomma.

Well, I had the same problem once but I don't remember exatcly the solution...
I am pretty sure it's a post-installation activity (search in SDN or marketplace for the relevant Guide).
You can also find some useful information in this doc right here <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/08438c77-0501-0010-50a0-e39">How-To Monitor and Analyze Errors in the SAP J2EE Adapter Engine</a> starting from chapter 3.
Let me know if this helps. In the meantime I will dig in my memory...
Cheers,
Alex

Report is not fetching the data from Aggregate..

Hi All,
I am facing the problem in aggregates..
For example when i am running the report using Tcode RSRT2, the BW report is not fetching the data from Aggregates.. instead going into the aggregate it is scanning whole cube Data....
FYI.. Checked the characteristcis is exactely matching with aggregates..
and also it is giving the message as:
<b>Characteristic 0G_CWWPTY is compressed but is not in the aggregate/query</b>
Can some body explain me about this error message.. pls let me know solution asap..
Thankyou in advance.
With regards,
Hari

Hi
Deactivate the aggregates and then rebuild the indexes and then activate the aggregates again.
GTR

Inter company PO is not pulling the valuation price from Material Master

Hi Experts,
We have a scenario, Inter-company PO with pricing procedure which pulls Material Price from Material Master (Std Price), similar to intra company PO
Even after maintaining the std price in the supplying plant , system is not pulling the Valuation price from Material master only for a particular Material
I checked the Plant level attributes ( for ex: Plant Mat status, client level status and everything looks fine )
Could you guys please mention what would be the issue ?
Thanks in advance
Illayaraja

Hi,
Is there a routine which pulls the value? then you need debug with ABAP help for that routine where its failing to pull
Thanks
Diwakar

Oracle Report is not finding the prt configuration file on 10G?

Oracle Report is not finding the prt configuration file on reports server 10G.
On another enviroment I had installed only Forms and Reports services. Here was finding
the prt configuration file and running ok.
Now I have "infrastructure" and "forms and reports services" and the reports server is not finding the prt configuration file.
I have the Internet Directory, Single Sign-on, oca, OC4J_SECURITY services "infrastructure" and the forms and reports services on the same machine.
Can somebody help me?
Celso
Edited by: user575217 on 17/09/2008 06:52

Definitions (explicit or implicit) on client side overwrite settings on server side. If not set explicitly, parameters like NLS_SORT and NLS_COMP are derived from environment variable NLS_LANG. If NLS_LANG is not set, it defaults to AMERICAN_AMERICA.US7ASCII. If client OS is Windows, the installer sets NLS_LANG according to the language of the OS (and writes the value into the registry), on UNIX NLS_LANG is not set automatically.

I am using an epson projector to present images downloaded to a thumb drive. I renames the images on export to "untitled 101, 102 etc. The projector will not recognize the sequence. It wants 001, 002etc. If I try to start 001 lightroom changes it to 1, 2

I am using an epson projector to present images downloaded to a thumb drive. I rename the images on export to "untitled 101, 102 etc. The projector will not recognize the sequence. It wants 001, 002etc. If I try to start 001 lightroom changes it to 1, 2 ... 10,11 etc. How can I export and rename starting with 001?

The projector may actually be processing a 3 digit number in numerical sequence. Have you tried your export/collection in order sequence starting with 101? Assuming you have fewer than 899 images you should be OK. (I had to fiddle with export sequence for a display frame which used the file date and time for sequence!)

Why is iTunes pulling the podcast info from my blog? Conflicting info.

Hi there. iTunes is pulling the title and description of my blog and listing it as the info for my podcast, instead of the podcast info I have in my feedburner account.
My feedburner feed is:http://feeds.feedburner.com/pleasefeedrichamooi
My blog is:http://www.richamooi.com/
Do you know why? Your help is greatly appreciated.

Your iTunes Store page is at
http://itunes.apple.com/gb/podcast/rich-amooi/id526262280
This is showing the info in the Feedburner feed: for example the 'Podcast Description' shows the contents of the 'itunes:summary' field:
'Romantic Comedies, Parodies, and Absurdities. All 100% Gluten-free.'
and similarly, for the only episodes, the 'itunes:subtitle' and 'itunes:summary' tags both read
'This was a radio commercial I wrote and voiced for Michael's Construction.'
and this is what shows in iTunes for the episode. The title, 'Rich Amooi', is the same in the feed and in iTunes, so I'm not clear what it is that you are seeing as wrong.

My Zen Micro will not leave the Start Scr

I have had my Micro since last Christmas. I have had no problems up untill yesterday, I went to turn it on, but when i pulled the little on button, it went straight to the open screen, made a really wierd noise then stopped, the light went off, and now it wont do anything, i plugged it into the wall jack and left it untill today when i woke up. I took it off of the charger and it was the same.. on that screen. I plugged it up to my computer but it wont recognize it!!! no matter what buttons i push it just stays the same!!
Someone Help!!!
<3 Steffles

Here's what you can try:
Zen Micro / Zen MicroPhoto
. Make sure that battery is charged.
2. Detach your player from the computer, and ensure that it is turned off.
3. Remove the battery.
4. Move and hold the Power button to the Power On position and re-insert the battery to the Zen Micro. Hold the Power button until the Recovery Mode appears.
5. The following options will be displayed:
* Clean Up (Performs a disk scan on the players hard disk, it will not affect music files)
* Format All (Formats the players hard disk - Note: all contents will be lost)
* Reload Firmware (Reloads the Operating System on the Jukebox)
* Reboot (Reboots the device).

The report can not retrieve the data from the DB

Dear all,
I am facing a problem is that i have ready designed reports in Crystal. While refreshing the report in Crystal, it gives an error that it can not retrive the information from the database. But, if i am using the application which the report is attached, it is giving me the results and showing the report in Crystal. Even, for testing if i add a new field, i have to run it from the application, but directly from the Crsytal Reports, it displays an error.
I hope you will help me in the issue.

Could you please provide more information:
What is the database? (Oracle, SQL Server, xml, etc.)
What type of connectivity? (ODBC, Native, OLE DB, etc)
Are application and Crystal Reports are running from the same machine?
What is the error message? Any error numbers?

Zen Reporting Infoview not pulling the inventory info I want

Similar Messages

Maybe you are looking for