Zen Sleek Photo - Dust Gathering Inside Scre

Purchased a Zen Sleek Photo a few weeks ago, and there is a gathering of dust below the screen, it isn't really noticable when the backlight is on, but when the screen is blank there is quite a lot of dust particles contained within.
Is there any way of cleaning the inside of my screen, Or am I stuck with it's Also, has anyone else had this problem?Message Edited by Blue_Lines on 05-23-2006 07:36 AM

This is a very common problem, and yes, you are going to have to deal with it.... There isn't a way that I know how to open the product to clean this screen. Sorry....
If there is a way, then please, someone post a how to. I would like to clean my scrren as well....

Similar Messages

  • My Zen Sleek with dust under the scre

    Hi,
    i have a zen sleek bad dust under the screen returned it and have got another one, same issue again i dont want to return it again due to inconvenience and postage costs,
    I have tried canned air and it doesnt work,
    Has anyone got a fix for this and what else can i do? could creative swap it for another model mp3 player?
    Thanks, Eddie

    zenny53 wrote:
    I've had to return a Sleek becuase of dust too. It doesn't matter how many new Zen Sleek's you get, they'll all get dust under the screen. When I got my second one, the FIRST thing I did was wrap the whole thing (except for the headphone socket and usb sockets and the touchpad) in clear tape. I find you can still use it perfectly and the tape really isn't noticeable unless you look closely. This is probably the best thing to do. Canned air didn't work for me. I've only found dust speck under the screen since getting my new player and it's because of the tape.
    One of the truly useful accessories lacking for Creative products are protecti've skins. People shouldn't have to resort to covering their player with tape.

  • Zen Sleek Photo: support for Album A

    As the title already says: will there be support for Album Art for the Zen Sleek Photo in future firmware versions?

    Yes I also ask the same question. I ordered mine earlier this week and thought the sleek would support album art. I actually downloaded MediaMonkey and took about 6+ hours going thru and organizing everything and making sure every album had an album cover. Please Creative just fix this one setback and it would be an even sweeter player then it already is! I couldn't afford to get a ZVM but the Sleek Photo was the next best thing. Please we're not asking much just help us out. There are people out here that still use your earlier players and are being left in the dust...don't leave us there when we know that you can fix it or provide us a way to fix it. Thanks!

  • Zen Sleek Photo won't boot

    I have just bought a used Zen Sleek photo and have been excited about getting it, but I was setting up some playlists in Windows media Player 0, I left the machine to sync and when I came back my Zen was off and now won't start up again. Is there a way to reset it or please please can anyone help with this, as I have so much stuff I want to listen to but the is now useless. I look forward to some words of wisdom. Thanks, HypnomanMessage Edited by Catherina-CL on 09-06-2007 2:3 PM

    Hi Hypnoman,
    The player does have a reset, you can press the button inside with a paperclip for instance. It should reboot (and reset) the player. Leave it charging for a while to make sure it has enough power to operate.
    When happens when you try to start up the player?
    On a seperate note, I have removed your signature, advertising is not allowed.
    Cat

  • Zen Sleek Photo: Audible (.aa) Format Supp

    I have been trying lately to load AudibleBooks (.aa) files onto my Zen Sleek Photo and it simply will not work. When trying to do it from inside AudibleManager it won't recognise the player and if I try dragging and dropping the .aa files onto the player using the Creative Media Manager it says "The format is not supported". I used to use a Zen Micro which worked with .aa files after a firmware upgrade but I can't find anything for the Sleek Photo. I think I found one for just the Sleek but not the Photo model. Is it not possible or am I missing something here?

    Could someone answer this question. After hours reading through posts, I'm thoroughly confused as to whether WMP playlists actually show up identically in the Zen Sleek.
    Chris

  • Zen Sleek Photo - XP doesn't install player

    Hi peeps,
    Being a Creative fan :smileysurprised: I decided to add the Zen Sleek Photo to my repertoire of Creative kit (Gigaworks S750 and X-Fi Fatality SoundBlaster).
    Well, it arri'ved this morning and after installing the software (except WMP0 as I already had that) I plumbed in the player and after getting the XP bubble "Found New Hardware" and the "Welcome to the Found New Hardware Wizard", when prompted to install the software for it, all I'm getting is:-
    "... There was a problem installing this hardware
    MTP Device
    An error occured during the installation of the device
    The service did not respond to the start or control request in a timely fasion..."
    Any ideas as to what the problem is?
    Hope someone can help as I'm mega frustrated that I can't even get any of my tunes on it to even give it a whirl - looks nice though
    Many thanks in advance,
    LAGAVULIN

    Lagavulin wrote:
    In reference to SSR's post, sure, I accept that these issues are not exactly unresolvable, but there is TOO much inconvenience involved for TOO many people. It shouldn't be a case of trawling through umpteen websites/FAQ's just to get a vague idea of what *might* be causing a problem. And since it appears these issues are quite frequent (from a commercial aspect at least) IMHO, Creative should attempt to proffer some easier resolution to the potential pitfalls, possibly by adding a few extra bits of software/instructions with the product.
    Agreed
    Creative should perform more checks on the computer to make sure that everything is required and installed and configured correctly to use the player. The steps listed in the MTP FAQ <a href='http://www.nomadness.net/modules.php?name=FAQ&myfaq=yes&id_cat=8&categories =Nomad+Jukebox+Zen#228' target=_blank>here[/url]. Are the most common methods to solve device detection issues. I'm sure Creative is aware of these problems and that these can be done. However Microsoft should be involved as it is their standard and Creative is simply making their products to the standard set out by Microsoft. Hopefully when WMP comes out, Microsoft would implement these changes or even change the way the computer recognizes MTP devices without disturbing the existing programs that do support MTP, like Notmad Explorer and Media Monkey. The suggestions listed in the FAQ are from Microsoft (hotfixes) and the users who have posted on the Creative, Dell, and iRi'ver forums. The suggestions were simply gathered up and put together.
    <a href='http://www.myfilehut.com/userfiles/54685/fixup.zip' target=_blank>This[/url] file basically does everything listed in the FAQ, just doesn't download the hotfixes for you, but does do the registry changes, the Windows Services, and other things as well. Its a simple solution which I will start giving as suggestions more and more, hopefully it will end up in the MTP FAQ.

  • Creative Zen Sleek Photo Firmware Download does not recognize my pla

    My Creative Zen Sleek Photo recently froze up. After restarting it, the "firmware problem" screen popped up. After reading up on it a bit, I decided to first clean, then reformat, and then reload the firmware. Everything went smoothly until I went to load the firmware back onto my Zen.
    For whatever reason a screen pops up that says that my device is not connected to the computer, when it, in fact, is. I have tried several things including uninstalling Windows Media Player and repeatedly cleaning and reformatting in hopes that it would recognize it.
    I have had no prior problems with the computer recognizing the device and I have loaded quite a bit of music onto it through this computer. Can anyone please help? Any more ideas? Anything will be helpful and appreciated. Thanks?

    HelloHave a look at this thread http://www.anythingbutipod.com/forum...ead.php?t=6328?I had a similar problem with a Zen Sleek Photo and I am sure that this was the thread I used to recover the player when a firmware upgrade failed. Regards?

  • Zen Sleek Photo Freezes/Locks Up after about 5 minutes usage (need to drain battery to recov

    Hi,
    My 20G Zen Sleek Photo has just recently transformed itself into a useless brick.
    No matter what I try and do, it always ends up freezing after about 5 minutes usage. When you force a reset it does unlock but when it comes back on it sticks on the Creative "copyright" start up screen.
    I've reformatted and re-installed the firmware several times but with the same result.
    font face="comic sans ms,sans-serif">
    The only time it totally unlocks is when you either:
    () let the battery fully drain and then recharge it or
    (2) you disconnect the battery lead and then press the On/Off switch for several minutes.
    I've looked everywhere for a solution/reason but nothing. You find plenty of people with the same problem but no answers. Surely someone knows how to fix the problem
    Is it a faulty battery (unlikely because mine charges up fine and holds it charge well)
    Is it the hard dri've (very unlikely since the player can start up correctly [given the above recovery procedure] and play tracks within the 5-0 minutes you have available)
    Is it the firmware (I doubt it, I can't see what the firmware's got to do with a delayed lock up, having worked fine up to that point)
    Is it the motherboard (maybe....., to my mind it points to a component failure that allows an electric charge to build up and not dissipate, the only way to discharge it is to short the battery pins [with, I hasten to add, the battery removed!])
    font face="comic sans ms,sans-serif">
    Has anyone within the Creative community successfully solved this problem Has anyone received a decent answer from Creative
    I find it staggering that the guys at Creative have washed their hands of this problem. They, after all, are the most likely people to identify the problem - only they have a schematic of the motherboard that would allow them to investigate and locate the problem.
    For the record the firmware I'm using is v .0.0.
    Any guidance would be much appreciated,
    Victor

    Is there really no one with an answer to this problem or have I overlooked a previous post that explained the fault.
    BR
    Victor

  • Zen sleek photo is detected in My Computer but not in WMP or Mediasou

    Hi, my Zen Sleek Photo is having some problems.When it connects, the player says it's connected, it shows up in My Computer but not in WMP or Mediasource, so i can't transfer anything. I tried the fixxup thing and the registry edit but it isn't working!!!Any help would be appreciated...

    No one at all?

  • Zen Sleek Photo - How do i know if its charg

    OK i put my new Zen Sleek Photo on charge two hours ago. when will i know if its completed charging?, the charge symbol is currently blinking

    Hey i own a Zen MicroPhoto and I think all the symbols are the same. When its charges, the lightning bolt on the battery will stop and I think there would be like a plug thingo covering the battery.

  • Creative Zen Sleek Photo & Windows Vi

    I've got a Creative Zen Sleek Photo player, and I just got a new computer for school. Since all new computers come standard with Vista, I can't download any of my Creative software because it is not compatible with Vista. Is there any kind of?download update or file that I can get so that I can make the software compatible and install it's

    You do not need to install the software on the disc. The driver is nati've to the Vista OS. Windows Media Player can Sync to the player rip cds, ect.

  • Transfering music from Napster To Go to Creative Zen Sleek Photo probl

    Hello
    I have a Creative Zen Sleek Photo with Napster To Go. I have Windows XP home edition. I can rip a CD to the hard dri've
    of the computer and transfer music to the mp3 player, but I am receiving a message when trying to transfer music files
    from Napster To Go. The message is the mp3 player will need an update to the firmware to work with Napster To Go.
    The Zen Sleek Photo has the latest firmware. I had been able to transfer music from Napster To Go until recently.
    Napster support referred me to Creative support but the Sleek Photo is past the warranty. Any help would be appreciated.
    Thank you.
    Bridget Ferrazzano

    I had problems for the first month of my Napster membership (while I was still in the trial period). I nearly went elsewhere, but stayed with it. As soon as the trial period was over, everything worked perfectly. One suggestion is to use the same software for everything. Whether you use Creative media source, Napster's own software or media explorer or any of the others, stick with that one only. Do not give up and go to itunes. What a waste of money!?If you need to reload firmware or try another software, it's worth it.
    I also had some issues getting help. Napster said the problem was with Creative and Creative said the problem was with Napster. Don't give up. Can you get ripped songs in?

  • Zen Sleek Photo gets USB DEVICE NOT RECOGNI

    I have ZEN Sleek Photo which i use for about a week now.
    Today I connected the player to the computer and got
    "USB DEVICE NOT RECOGNIZED" window in Win XP
    and the Zen Photo froze.
    Disconnected it, reset it using a pin, then turn it on and it's "re-building library"
    It works good as a player but i can't connect it to the computer.
    Tried restarting the computer, restoring the windows to a previous day, connected to all possible USB ports nothing hel
    ps.
    Hope for an answer
    Thanks in advance,
    Danny
    UPDATE.... PROBLEM SOLVED.. LOOK BELOW.. FRED'S SUGGESTIONMessage Edited by dindia on 07-24-2006 2:49 AM

    fred38 wrote:
    Hi i had this problem too and the solution was amazingly simple. (I found it by searching on Google for ages!) Turn your pc off and then unplug it from the mains for approximately 30 mins. I know it sounds crazy but apparantly static electricity can cause problems with usb devices particularly if you have your device already plugged in to USB port-Windows forgets its there! After 30 mins plug your pc back in to the mains and voila! your Zen will be recognised again.
    2:44 AM : After 30 minutes of trying to fall asleep with no success turned on computer and connected the Zen... Didn't have much expectations, but IT WORKED! IT REALLY DID! WINDOWS FOUND THE DEVICE CORRECTLY AND EVERYTHING IS WORKING NOW!
    THANSKS FRED!
    Danny

  • Zen Sleek Photo on Windows 98

    My 20GB Zen Sleek Photo arri'ved today, but my computer won't let me run the installation disc. It keeps giving me a message saying that the Windows operating system on my computer is not supported by the product. Is there any way of getting around this? I would appreciate it if someone couple help, thanks.

    Hi ProvWolf,
    Unfortunately, as the system requirements (on the site and box) detail, this player requires WindowsXP (with SP or later) or Windows XP Professional x64 edition. Windows98SE is not supported.
    http://www.creative.com/products/pro...uct=4259&nav=3
    Cat

  • ZEN SLEEK PHOTO & WINDOWS 98 SE!! AAAAAARGGH!

    Hi!
    Apologies in advance if this problem has already been raised and addressed, but due to a mismatch of information, I find I have now invested in a lovely mp3 player (namely ZEN SLEEK PHOTO) I can't use. The problem? It's mimimum OE requirement is XP and I'm still running WINDOWS 98 SE. Okay, obviously the solution (ahem) is to upgrade to the XP System, but, I'm hearing all sorts of talk of driver updates, installations, fixes etc and wondered if someone knew of any available remedy here on Creative. At the present time, the installation disc is not chuffed with the OE system and I can get no further.
    Anyone have any nice, straight-forward step-by-step solution they'd care to share?
    Cheers
    TinoMessage Edited by TINOBEN on 0-04-2006 09:34 PM

    <EM>It's a PlaysForSure device, and uses the same drivers any other PlaysForSure device uses. It's standardized.</EM>
    I've finished downloading the drivers required. Do I now just need to connect my player or am I required to install the software on the ZEN SLEEK PHOTO first? The last time this was unsuccessful because of the Operating System. So if all this works, I'm guessing that it will be a case of transferring mp3 files (hopefully straight from my hard dri've through WMP) into the Zen player.
    Can you please confirm the procedure using WMP?
    Peter

Maybe you are looking for

  • PL/sql web service error !!!!!!! Help

    I was trying out the PL/SQL webservice example on OTN [http://otn.oracle.com/pub/articles/price_10gws.html] My environment is Oracle10G database, which comes with standalone version of oc4j, and I followed all the steps per the article but I still ge

  • ZEN MICRO: firmware improvements suggesti

    Some suggestions and bug-signalations to improve firmware of Zen Micro. (actually I use fw .02.05): [*]play songs in a album not in alphabetical order, but using track number order, for me has more sense, do you? Because concept album, but all albums

  • Application deployment issue in WLI 8.5

    Hello all, <br> I have created an application via a local instance of weblogic workshop 8.1 and would like to deploy the compiled .ear into a weblogic server domain. <br> During the deployment process, I get an error (see bottom of post). <br> Howeve

  • Express Slot 34 Problem

    Hello, i have a  Mid 2010 17" Macbook Pro. I own 2 Tempo SATA cards. A SATA Pro Express Card and a Firewire 800 Pro Card. Everything was working fine up intill lastweek. I leave my computer for a minute come back and get the message that my hd has be

  • Font size in writing mail is too small for first two lines and then switches to 12. How do I change this to start and stay in 12.

    When I want to reply to a message or just compose one, the font size is Times Roman 10 which is too small. After two lines it becomes 12. How can I change the font to start and remain Times Roman 12?